phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT

The documentation for Marvell's cp110 phy refers to these
registers/register regions as DTL control, DTL frequency loop enable,
etc. This patch aligns the relevant code for these accordingly.

Signed-off-by: Matt Pelland <mpelland@starry.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Matt Pelland 2019-08-01 15:50:59 -04:00 committed by Kishon Vijay Abraham I
parent f2a857aa2a
commit 5af67635c3

View File

@ -80,8 +80,8 @@
#define MVEBU_COMPHY_TX_SLEW_RATE(n) (0x974 + (n) * 0x1000)
#define MVEBU_COMPHY_TX_SLEW_RATE_EMPH(n) ((n) << 5)
#define MVEBU_COMPHY_TX_SLEW_RATE_SLC(n) ((n) << 10)
#define MVEBU_COMPHY_DLT_CTRL(n) (0x984 + (n) * 0x1000)
#define MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN BIT(2)
#define MVEBU_COMPHY_DTL_CTRL(n) (0x984 + (n) * 0x1000)
#define MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN BIT(2)
#define MVEBU_COMPHY_FRAME_DETECT0(n) (0xa14 + (n) * 0x1000)
#define MVEBU_COMPHY_FRAME_DETECT0_PATN(n) ((n) << 7)
#define MVEBU_COMPHY_FRAME_DETECT3(n) (0xa20 + (n) * 0x1000)
@ -494,9 +494,9 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL;
writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
val &= ~MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN;
writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
val &= ~MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
regmap_read(priv->regmap, MVEBU_COMPHY_CONF1(lane->id), &val);
val &= ~MVEBU_COMPHY_CONF1_USB_PCIE;
@ -527,9 +527,9 @@ static int mvebu_comphy_set_mode_rxaui(struct phy *phy)
MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
val |= MVEBU_COMPHY_DLT_CTRL_DLT_FLOOP_EN;
writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
val = readl(priv->base + MVEBU_COMPHY_SERDES_CFG2(lane->id));
val |= MVEBU_COMPHY_SERDES_CFG2_DFE_EN;
@ -580,9 +580,9 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
val |= MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN;
writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
/* Speed divider */
val = readl(priv->base + MVEBU_COMPHY_SPEED_DIV(lane->id));