cpufreq: Remove CPUFREQ_STICKY flag

During cpufreq driver's registration, if the ->init() callback for all
the CPUs fail then there is not much point in keeping the driver around
as it will only account for more of unnecessary noise, for example
cpufreq core will try to suspend/resume the driver which never got
registered properly.

The removal of such a driver is avoided if the driver carries the
CPUFREQ_STICKY flag. This was added way back [1] in 2004 and perhaps no
one should ever need it now. A lot of drivers do set this flag, probably
because they just copied it from other drivers.

This was added earlier for some platforms [2] because their cpufreq
drivers were getting registered before the CPUs were registered with
subsys framework. And hence they used to fail.

The same isn't true anymore though. The current code flow in the kernel
is:

start_kernel()
-> kernel_init()
   -> kernel_init_freeable()
      -> do_basic_setup()
         -> driver_init()
            -> cpu_dev_init()
               -> subsys_system_register() //For CPUs

         -> do_initcalls()
            -> cpufreq_register_driver()

Clearly, the CPUs will always get registered with subsys framework
before any cpufreq driver can get probed. Remove the flag and update the
relevant drivers.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/include/linux/cpufreq.h?id=7cc9f0d9a1ab04cedc60d64fd8dcf7df224a3b4d # [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/arch/arm/mach-sa1100/cpu-sa1100.c?id=f59d3bbe35f6268d729f51be82af8325d62f20f5 # [2]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit is contained in:
Viresh Kumar 2021-02-02 10:25:11 +05:30 committed by Rafael J. Wysocki
parent 75a8d877d6
commit 5ae4a4b45d
18 changed files with 24 additions and 30 deletions

View File

@ -175,7 +175,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
}
static struct cpufreq_driver dt_cpufreq_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
CPUFREQ_IS_COOLING_DEV,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = set_target,

View File

@ -2810,8 +2810,7 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
if (ret)
goto err_boost_unreg;
if (!(cpufreq_driver->flags & CPUFREQ_STICKY) &&
list_empty(&cpufreq_policy_list)) {
if (unlikely(list_empty(&cpufreq_policy_list))) {
/* if all ->init() calls failed, unregister */
ret = -ENODEV;
pr_debug("%s: No CPU initialized for driver %s\n", __func__,

View File

@ -95,7 +95,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy)
}
static struct cpufreq_driver davinci_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = davinci_target,
.get = cpufreq_generic_get,

View File

@ -116,7 +116,7 @@ static int ls1x_cpufreq_exit(struct cpufreq_policy *policy)
static struct cpufreq_driver ls1x_cpufreq_driver = {
.name = "cpufreq-ls1x",
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = ls1x_cpufreq_target,
.get = cpufreq_generic_get,

View File

@ -463,7 +463,7 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
}
static struct cpufreq_driver mtk_cpufreq_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
CPUFREQ_IS_COOLING_DEV,
.verify = cpufreq_generic_frequency_table_verify,

View File

@ -144,7 +144,7 @@ static int omap_cpu_exit(struct cpufreq_policy *policy)
}
static struct cpufreq_driver omap_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = omap_target,
.get = cpufreq_generic_get,

View File

@ -374,7 +374,7 @@ static struct freq_attr *qcom_cpufreq_hw_attr[] = {
};
static struct cpufreq_driver cpufreq_qcom_hw_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
CPUFREQ_IS_COOLING_DEV,
.verify = cpufreq_generic_frequency_table_verify,

View File

@ -420,7 +420,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
#endif
static struct cpufreq_driver s3c24xx_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.target = s3c_cpufreq_target,
.get = cpufreq_generic_get,
.init = s3c_cpufreq_init,

View File

@ -574,7 +574,7 @@ static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this,
}
static struct cpufreq_driver s5pv210_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = s5pv210_target,
.get = cpufreq_generic_get,

View File

@ -186,7 +186,7 @@ static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
}
static struct cpufreq_driver sa1100_driver __refdata = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = sa1100_target,

View File

@ -310,7 +310,7 @@ static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
/* sa1110_driver needs __refdata because it must remain after init registers
* it with cpufreq_register_driver() */
static struct cpufreq_driver sa1110_driver __refdata = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = sa1110_target,

View File

@ -217,7 +217,7 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
static struct cpufreq_driver scmi_cpufreq_driver = {
.name = "scmi",
.flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
.flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
CPUFREQ_NEED_INITIAL_FREQ_CHECK |
CPUFREQ_IS_COOLING_DEV,
.verify = cpufreq_generic_frequency_table_verify,

View File

@ -191,7 +191,7 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
static struct cpufreq_driver scpi_cpufreq_driver = {
.name = "scpi-cpufreq",
.flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
.flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
CPUFREQ_NEED_INITIAL_FREQ_CHECK |
CPUFREQ_IS_COOLING_DEV,
.verify = cpufreq_generic_frequency_table_verify,

View File

@ -160,7 +160,7 @@ static int spear_cpufreq_init(struct cpufreq_policy *policy)
static struct cpufreq_driver spear_cpufreq_driver = {
.name = "cpufreq-spear",
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = spear_cpufreq_target,
.get = cpufreq_generic_get,

View File

@ -117,7 +117,7 @@ static unsigned int tegra186_cpufreq_get(unsigned int cpu)
static struct cpufreq_driver tegra186_cpufreq_driver = {
.name = "tegra186",
.flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
.flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.get = tegra186_cpufreq_get,
.verify = cpufreq_generic_frequency_table_verify,

View File

@ -272,8 +272,7 @@ static int tegra194_cpufreq_set_target(struct cpufreq_policy *policy,
static struct cpufreq_driver tegra194_cpufreq_driver = {
.name = "tegra194",
.flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS |
CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.flags = CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = tegra194_cpufreq_set_target,
.get = tegra194_get_speed,

View File

@ -486,8 +486,7 @@ static void ve_spc_cpufreq_ready(struct cpufreq_policy *policy)
static struct cpufreq_driver ve_spc_cpufreq_driver = {
.name = "vexpress-spc",
.flags = CPUFREQ_STICKY |
CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
.flags = CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = ve_spc_cpufreq_set_target,

View File

@ -387,8 +387,13 @@ struct cpufreq_driver {
/* flags */
/* driver isn't removed even if all ->init() calls failed */
#define CPUFREQ_STICKY BIT(0)
/*
* Set by drivers that need to update internale upper and lower boundaries along
* with the target frequency and so the core and governors should also invoke
* the diver if the target frequency does not change, but the policy min or max
* may have changed.
*/
#define CPUFREQ_NEED_UPDATE_LIMITS BIT(0)
/* loops_per_jiffy or other kernel "constants" aren't affected by frequency transitions */
#define CPUFREQ_CONST_LOOPS BIT(1)
@ -432,14 +437,6 @@ struct cpufreq_driver {
*/
#define CPUFREQ_IS_COOLING_DEV BIT(7)
/*
* Set by drivers that need to update internale upper and lower boundaries along
* with the target frequency and so the core and governors should also invoke
* the diver if the target frequency does not change, but the policy min or max
* may have changed.
*/
#define CPUFREQ_NEED_UPDATE_LIMITS BIT(8)
int cpufreq_register_driver(struct cpufreq_driver *driver_data);
int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);