powerpc/85xx: add P1020RDB-PD platform support

The p1020rdb-pd has the similar feature as the p1020rdb.
Therefore, p1020rdb-pd use the same platform file as the p1/p2 rdb board.
Overview of P1020RDB-PD platform:
- DDR3 2GB
- NOR flash 64MB
- NAND flash 128MB
- SPI flash 16MB
- I2C EEPROM 256Kb
	- eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch
	- eTSEC2 (SGMII PHY)
- eTSEC3 (RGMII PHY)
	- SDHC
	- 2 USB ports
	- 4 TDM ports
	- PCIe

Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This commit is contained in:
Haijun.Zhang 2013-07-01 12:12:22 +08:00 committed by Scott Wood
parent 4e21b94c9c
commit 550593e8f5

View File

@ -160,6 +160,7 @@ machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_rdb_pd, mpc85xx_common_publish_devices);
machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
@ -193,6 +194,13 @@ static int __init p1020_rdb_pc_probe(void)
return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC");
}
static int __init p1020_rdb_pd_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PD");
}
static int __init p1021_rdb_pc_probe(void)
{
unsigned long root = of_get_flat_dt_root();
@ -351,6 +359,20 @@ define_machine(p1020_rdb_pc) {
.progress = udbg_progress,
};
define_machine(p1020_rdb_pd) {
.name = "P1020RDB-PD",
.probe = p1020_rdb_pd_probe,
.setup_arch = mpc85xx_rdb_setup_arch,
.init_IRQ = mpc85xx_rdb_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
define_machine(p1024_rdb) {
.name = "P1024 RDB",
.probe = p1024_rdb_probe,