Merge branch 'linus_origin' into hotfixes

This commit is contained in:
Trond Myklebust 2008-02-15 13:36:30 -05:00
commit 52833e897f
271 changed files with 5295 additions and 3410 deletions

View File

@ -109,6 +109,8 @@ cpu-hotplug.txt
- document describing CPU hotplug support in the Linux kernel.
cpu-load.txt
- document describing how CPU load statistics are collected.
cpuidle/
- info on CPU_IDLE, CPU idle state management subsystem.
cpusets.txt
- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
cputopology.txt

View File

@ -0,0 +1,23 @@
Supporting multiple CPU idle levels in kernel
cpuidle
General Information:
Various CPUs today support multiple idle levels that are differentiated
by varying exit latencies and power consumption during idle.
cpuidle is a generic in-kernel infrastructure that separates
idle policy (governor) from idle mechanism (driver) and provides a
standardized infrastructure to support independent development of
governors and drivers.
cpuidle resides under drivers/cpuidle.
Boot options:
"cpuidle_sysfs_switch"
enables current_governor interface in /sys/devices/system/cpu/cpuidle/,
which can be used to switch governors at run time. This boot option
is meant for developer testing only. In normal usage, kernel picks the
best governor based on governor ratings.
SEE ALSO: sysfs.txt in this directory.

View File

@ -0,0 +1,31 @@
Supporting multiple CPU idle levels in kernel
cpuidle drivers
cpuidle driver hooks into the cpuidle infrastructure and handles the
architecture/platform dependent part of CPU idle states. Driver
provides the platform idle state detection capability and also
has mechanisms in place to support actual entry-exit into CPU idle states.
cpuidle driver initializes the cpuidle_device structure for each CPU device
and registers with cpuidle using cpuidle_register_device.
It can also support the dynamic changes (like battery <-> AC), by using
cpuidle_pause_and_lock, cpuidle_disable_device and cpuidle_enable_device,
cpuidle_resume_and_unlock.
Interfaces:
extern int cpuidle_register_driver(struct cpuidle_driver *drv);
extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
extern int cpuidle_register_device(struct cpuidle_device *dev);
extern void cpuidle_unregister_device(struct cpuidle_device *dev);
extern void cpuidle_pause_and_lock(void);
extern void cpuidle_resume_and_unlock(void);
extern int cpuidle_enable_device(struct cpuidle_device *dev);
extern void cpuidle_disable_device(struct cpuidle_device *dev);

View File

@ -0,0 +1,29 @@
Supporting multiple CPU idle levels in kernel
cpuidle governors
cpuidle governor is policy routine that decides what idle state to enter at
any given time. cpuidle core uses different callbacks to the governor.
* enable() to enable governor for a particular device
* disable() to disable governor for a particular device
* select() to select an idle state to enter
* reflect() called after returning from the idle state, which can be used
by the governor for some record keeping.
More than one governor can be registered at the same time and
users can switch between drivers using /sysfs interface (when enabled).
More than one governor part is supported for developers to easily experiment
with different governors. By default, most optimal governor based on your
kernel configuration and platform will be selected by cpuidle.
Interfaces:
extern int cpuidle_register_governor(struct cpuidle_governor *gov);
extern void cpuidle_unregister_governor(struct cpuidle_governor *gov);
struct cpuidle_governor

View File

@ -0,0 +1,79 @@
Supporting multiple CPU idle levels in kernel
cpuidle sysfs
System global cpuidle related information and tunables are under
/sys/devices/system/cpu/cpuidle
The current interfaces in this directory has self-explanatory names:
* current_driver
* current_governor_ro
With cpuidle_sysfs_switch boot option (meant for developer testing)
following objects are visible instead.
* current_driver
* available_governors
* current_governor
In this case users can switch the governor at run time by writing
to current_governor.
Per logical CPU specific cpuidle information are under
/sys/devices/system/cpu/cpuX/cpuidle
for each online cpu X
--------------------------------------------------------------------------------
# ls -lR /sys/devices/system/cpu/cpu0/cpuidle/
/sys/devices/system/cpu/cpu0/cpuidle/:
total 0
drwxr-xr-x 2 root root 0 Feb 8 10:42 state0
drwxr-xr-x 2 root root 0 Feb 8 10:42 state1
drwxr-xr-x 2 root root 0 Feb 8 10:42 state2
drwxr-xr-x 2 root root 0 Feb 8 10:42 state3
/sys/devices/system/cpu/cpu0/cpuidle/state0:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
/sys/devices/system/cpu/cpu0/cpuidle/state1:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
/sys/devices/system/cpu/cpu0/cpuidle/state2:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
/sys/devices/system/cpu/cpu0/cpuidle/state3:
total 0
-r--r--r-- 1 root root 4096 Feb 8 10:42 desc
-r--r--r-- 1 root root 4096 Feb 8 10:42 latency
-r--r--r-- 1 root root 4096 Feb 8 10:42 name
-r--r--r-- 1 root root 4096 Feb 8 10:42 power
-r--r--r-- 1 root root 4096 Feb 8 10:42 time
-r--r--r-- 1 root root 4096 Feb 8 10:42 usage
--------------------------------------------------------------------------------
* desc : Small description about the idle state (string)
* latency : Latency to exit out of this idle state (in microseconds)
* name : Name of the idle state (string)
* power : Power consumed while in this idle state (in milliwatts)
* time : Total time spent in this idle state (in microseconds)
* usage : Number of times this state was entered (count)

View File

@ -1255,8 +1255,8 @@ W: http://linux-net.osdl.org/index.php/DCCP
S: Maintained
DECnet NETWORK LAYER
P: Patrick Caulfield
M: patrick@tykepenguin.com
P: Christine Caulfield
M: christine.caulfield@googlemail.com
W: http://linux-decnet.sourceforge.net
L: linux-decnet-user@lists.sourceforge.net
S: Maintained
@ -1318,8 +1318,8 @@ L: linux-kernel@vger.kernel.org
S: Maintained
DISTRIBUTED LOCK MANAGER
P: Patrick Caulfield
M: pcaulfie@redhat.com
P: Christine Caulfield
M: ccaulfie@redhat.com
P: David Teigland
M: teigland@redhat.com
L: cluster-devel@redhat.com
@ -1616,6 +1616,7 @@ S: Maintained
FILESYSTEMS (VFS and infrastructure)
P: Alexander Viro
M: viro@zeniv.linux.org.uk
L: linux-fsdevel@vger.kernel.org
S: Maintained
FIREWIRE SUBSYSTEM (drivers/firewire, <linux/firewire*.h>)

View File

@ -259,8 +259,8 @@ osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bu
retval = user_path_walk(path, &nd);
if (!retval) {
retval = do_osf_statfs(nd.dentry, buffer, bufsiz);
path_release(&nd);
retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz);
path_put(&nd.path);
}
return retval;
}

View File

@ -126,15 +126,13 @@ static void decode_address(char *buf, unsigned long address)
struct vm_area_struct *vma = vml->vma;
if (address >= vma->vm_start && address < vma->vm_end) {
char _tmpbuf[256];
char *name = p->comm;
struct file *file = vma->vm_file;
if (file) {
char _tmpbuf[256];
name = d_path(file->f_dentry,
file->f_vfsmnt,
_tmpbuf,
sizeof(_tmpbuf));
}
if (file)
name = d_path(&file->f_path, _tmpbuf,
sizeof(_tmpbuf));
/* FLAT does not have its text aligned to the start of
* the map while FDPIC ELF does ...

View File

@ -1,252 +1,259 @@
/*#************************************************************************#*/
/*#-------------------------------------------------------------------------*/
/*# */
/*# FUNCTION NAME: memset() */
/*# */
/*# PARAMETERS: void* dst; Destination address. */
/*# int c; Value of byte to write. */
/*# int len; Number of bytes to write. */
/*# */
/*# RETURNS: dst. */
/*# */
/*# DESCRIPTION: Sets the memory dst of length len bytes to c, as standard. */
/*# Framework taken from memcpy. This routine is */
/*# very sensitive to compiler changes in register allocation. */
/*# Should really be rewritten to avoid this problem. */
/*# */
/*#-------------------------------------------------------------------------*/
/*# */
/*# HISTORY */
/*# */
/*# DATE NAME CHANGES */
/*# ---- ---- ------- */
/*# 990713 HP Tired of watching this function (or */
/*# really, the nonoptimized generic */
/*# implementation) take up 90% of simulator */
/*# output. Measurements needed. */
/*# */
/*#-------------------------------------------------------------------------*/
/* A memset for CRIS.
Copyright (C) 1999-2005 Axis Communications.
All rights reserved.
#include <linux/types.h>
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
/* No, there's no macro saying 12*4, since it is "hard" to get it into
the asm in a good way. Thus better to expose the problem everywhere.
*/
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
/* Assuming 1 cycle per dword written or read (ok, not really true), and
one per instruction, then 43+3*(n/48-1) <= 24+24*(n/48-1)
so n >= 45.7; n >= 0.9; we win on the first full 48-byte block to set. */
2. Neither the name of Axis Communications nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
#define ZERO_BLOCK_SIZE (1*12*4)
THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. */
void *memset(void *pdst,
int c,
size_t plen)
/* FIXME: This file should really only be used for reference, as the
result is somewhat depending on gcc generating what we expect rather
than what we describe. An assembly file should be used instead. */
/* Note the multiple occurrence of the expression "12*4", including the
asm. It is hard to get it into the asm in a good way. Thus better to
expose the problem everywhere: no macro. */
/* Assuming one cycle per dword written or read (ok, not really true; the
world is not ideal), and one cycle per instruction, then 43+3*(n/48-1)
<= 24+24*(n/48-1) so n >= 45.7; n >= 0.9; we win on the first full
48-byte block to set. */
#define MEMSET_BY_BLOCK_THRESHOLD (1 * 48)
/* No name ambiguities in this file. */
__asm__ (".syntax no_register_prefix");
void *memset(void *pdst, int c, unsigned int plen)
{
/* Ok. Now we want the parameters put in special registers.
Make sure the compiler is able to make something useful of this. */
/* Now we want the parameters in special registers. Make sure the
compiler does something usable with this. */
register char *return_dst __asm__ ("r10") = pdst;
register int n __asm__ ("r12") = plen;
register int lc __asm__ ("r11") = c;
/* Most apps use memset sanely. Only those memsetting about 3..4
bytes or less get penalized compared to the generic implementation
- and that's not really sane use. */
/* Most apps use memset sanely. Memsetting about 3..4 bytes or less get
penalized here compared to the generic implementation. */
/* Ugh. This is fragile at best. Check with newer GCC releases, if
they compile cascaded "x |= x << 8" sanely! */
__asm__("movu.b %0,$r13\n\t"
"lslq 8,$r13\n\t"
"move.b %0,$r13\n\t"
"move.d $r13,%0\n\t"
"lslq 16,$r13\n\t"
"or.d $r13,%0"
: "=r" (lc) : "0" (lc) : "r13");
/* This is fragile performancewise at best. Check with newer GCC
releases, if they compile cascaded "x |= x << 8" to sane code. */
__asm__("movu.b %0,r13 \n\
lslq 8,r13 \n\
move.b %0,r13 \n\
move.d r13,%0 \n\
lslq 16,r13 \n\
or.d r13,%0"
: "=r" (lc) /* Inputs. */
: "0" (lc) /* Outputs. */
: "r13"); /* Trash. */
{
register char *dst __asm__ ("r13") = pdst;
/* This is NONPORTABLE, but since this whole routine is */
/* grossly nonportable that doesn't matter. */
if (((unsigned long) pdst & 3) != 0
/* Oops! n = 0 must be a valid call, regardless of alignment. */
&& n >= 3)
{
if ((unsigned long) dst & 1)
{
*dst = (char) lc;
n--;
dst++;
}
if (((unsigned long) pdst & 3) != 0
/* Oops! n=0 must be a legal call, regardless of alignment. */
&& n >= 3)
{
if ((unsigned long)dst & 1)
{
*dst = (char) lc;
n--;
dst++;
}
if ((unsigned long) dst & 2)
{
*(short *) dst = lc;
n -= 2;
dst += 2;
}
}
if ((unsigned long)dst & 2)
{
*(short *)dst = lc;
n -= 2;
dst += 2;
}
}
/* Now the fun part. For the threshold value of this, check the equation
above. */
/* Decide which copying method to use. */
if (n >= ZERO_BLOCK_SIZE)
{
/* For large copies we use 'movem' */
/* It is not optimal to tell the compiler about clobbering any
registers; that will move the saving/restoring of those registers
to the function prologue/epilogue, and make non-movem sizes
suboptimal.
This method is not foolproof; it assumes that the "asm reg"
declarations at the beginning of the function really are used
here (beware: they may be moved to temporary registers).
This way, we do not have to save/move the registers around into
temporaries; we can safely use them straight away.
If you want to check that the allocation was right; then
check the equalities in the first comment. It should say
"r13=r13, r12=r12, r11=r11" */
__asm__ volatile ("\n\
;; Check that the following is true (same register names on \n\
;; both sides of equal sign, as in r8=r8): \n\
;; %0=r13, %1=r12, %4=r11 \n\
;; \n\
;; Save the registers we'll clobber in the movem process \n\
;; on the stack. Don't mention them to gcc, it will only be \n\
;; upset. \n\
subq 11*4,$sp \n\
movem $r10,[$sp] \n\
/* Decide which setting method to use. */
if (n >= MEMSET_BY_BLOCK_THRESHOLD)
{
/* It is not optimal to tell the compiler about clobbering any
registers; that will move the saving/restoring of those registers
to the function prologue/epilogue, and make non-block sizes
suboptimal. */
__asm__ volatile
("\
;; GCC does promise correct register allocations, but let's \n\
;; make sure it keeps its promises. \n\
.ifnc %0-%1-%4,$r13-$r12-$r11 \n\
.error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\" \n\
.endif \n\
\n\
move.d $r11,$r0 \n\
move.d $r11,$r1 \n\
move.d $r11,$r2 \n\
move.d $r11,$r3 \n\
move.d $r11,$r4 \n\
move.d $r11,$r5 \n\
move.d $r11,$r6 \n\
move.d $r11,$r7 \n\
move.d $r11,$r8 \n\
move.d $r11,$r9 \n\
move.d $r11,$r10 \n\
;; Save the registers we'll clobber in the movem process \n\
;; on the stack. Don't mention them to gcc, it will only be \n\
;; upset. \n\
subq 11*4,sp \n\
movem r10,[sp] \n\
\n\
;; Now we've got this: \n\
;; r13 - dst \n\
;; r12 - n \n\
move.d r11,r0 \n\
move.d r11,r1 \n\
move.d r11,r2 \n\
move.d r11,r3 \n\
move.d r11,r4 \n\
move.d r11,r5 \n\
move.d r11,r6 \n\
move.d r11,r7 \n\
move.d r11,r8 \n\
move.d r11,r9 \n\
move.d r11,r10 \n\
\n\
;; Update n for the first loop \n\
subq 12*4,$r12 \n\
;; Now we've got this: \n\
;; r13 - dst \n\
;; r12 - n \n\
\n\
;; Update n for the first loop \n\
subq 12*4,r12 \n\
0: \n\
subq 12*4,$r12 \n\
bge 0b \n\
movem $r11,[$r13+] \n\
"
#ifdef __arch_common_v10_v32
/* Cater to branch offset difference between v32 and v10. We
assume the branch below has an 8-bit offset. */
" setf\n"
#endif
" subq 12*4,r12 \n\
bge 0b \n\
movem r11,[r13+] \n\
\n\
addq 12*4,$r12 ;; compensate for last loop underflowing n \n\
;; Compensate for last loop underflowing n. \n\
addq 12*4,r12 \n\
\n\
;; Restore registers from stack \n\
movem [$sp+],$r10"
;; Restore registers from stack. \n\
movem [sp+],r10"
/* Outputs */ : "=r" (dst), "=r" (n)
/* Inputs */ : "0" (dst), "1" (n), "r" (lc));
/* Outputs. */
: "=r" (dst), "=r" (n)
}
/* Inputs. */
: "0" (dst), "1" (n), "r" (lc));
}
/* Either we directly starts copying, using dword copying
in a loop, or we copy as much as possible with 'movem'
and then the last block (<44 bytes) is copied here.
This will work since 'movem' will have updated src,dst,n. */
/* An ad-hoc unroll, used for 4*12-1..16 bytes. */
while (n >= 16)
{
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
n -= 16;
}
while ( n >= 16 )
{
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
n -= 16;
}
/* A switch() is definitely the fastest although it takes a LOT of code.
* Particularly if you inline code this.
*/
switch (n)
{
{
case 0:
break;
case 1:
*(char*)dst = (char) lc;
*dst = (char) lc;
break;
case 2:
*(short*)dst = (short) lc;
*(short *) dst = (short) lc;
break;
case 3:
*((short*)dst)++ = (short) lc;
*(char*)dst = (char) lc;
*(short *) dst = (short) lc; dst += 2;
*dst = (char) lc;
break;
case 4:
*((long*)dst)++ = lc;
*(long *) dst = lc;
break;
case 5:
*((long*)dst)++ = lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*dst = (char) lc;
break;
case 6:
*((long*)dst)++ = lc;
*(short*)dst = (short) lc;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc;
break;
case 7:
*((long*)dst)++ = lc;
*((short*)dst)++ = (short) lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc; dst += 2;
*dst = (char) lc;
break;
case 8:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc;
break;
case 9:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*dst = (char) lc;
break;
case 10:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(short*)dst = (short) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc;
break;
case 11:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((short*)dst)++ = (short) lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc; dst += 2;
*dst = (char) lc;
break;
case 12:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc;
break;
case 13:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*dst = (char) lc;
break;
case 14:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(short*)dst = (short) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc;
break;
case 15:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((short*)dst)++ = (short) lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc; dst += 2;
*dst = (char) lc;
break;
}
}
}
return return_dst; /* destination pointer. */
} /* memset() */
return return_dst;
}

View File

@ -1,253 +1,259 @@
/*#************************************************************************#*/
/*#-------------------------------------------------------------------------*/
/*# */
/*# FUNCTION NAME: memset() */
/*# */
/*# PARAMETERS: void* dst; Destination address. */
/*# int c; Value of byte to write. */
/*# int len; Number of bytes to write. */
/*# */
/*# RETURNS: dst. */
/*# */
/*# DESCRIPTION: Sets the memory dst of length len bytes to c, as standard. */
/*# Framework taken from memcpy. This routine is */
/*# very sensitive to compiler changes in register allocation. */
/*# Should really be rewritten to avoid this problem. */
/*# */
/*#-------------------------------------------------------------------------*/
/*# */
/*# HISTORY */
/*# */
/*# DATE NAME CHANGES */
/*# ---- ---- ------- */
/*# 990713 HP Tired of watching this function (or */
/*# really, the nonoptimized generic */
/*# implementation) take up 90% of simulator */
/*# output. Measurements needed. */
/*# */
/*#-------------------------------------------------------------------------*/
/* A memset for CRIS.
Copyright (C) 1999-2005 Axis Communications.
All rights reserved.
#include <linux/types.h>
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
/* No, there's no macro saying 12*4, since it is "hard" to get it into
the asm in a good way. Thus better to expose the problem everywhere.
*/
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
/* Assuming 1 cycle per dword written or read (ok, not really true), and
one per instruction, then 43+3*(n/48-1) <= 24+24*(n/48-1)
so n >= 45.7; n >= 0.9; we win on the first full 48-byte block to set. */
2. Neither the name of Axis Communications nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
#define ZERO_BLOCK_SIZE (1*12*4)
THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. */
void *memset(void *pdst,
int c,
size_t plen)
/* FIXME: This file should really only be used for reference, as the
result is somewhat depending on gcc generating what we expect rather
than what we describe. An assembly file should be used instead. */
/* Note the multiple occurrence of the expression "12*4", including the
asm. It is hard to get it into the asm in a good way. Thus better to
expose the problem everywhere: no macro. */
/* Assuming one cycle per dword written or read (ok, not really true; the
world is not ideal), and one cycle per instruction, then 43+3*(n/48-1)
<= 24+24*(n/48-1) so n >= 45.7; n >= 0.9; we win on the first full
48-byte block to set. */
#define MEMSET_BY_BLOCK_THRESHOLD (1 * 48)
/* No name ambiguities in this file. */
__asm__ (".syntax no_register_prefix");
void *memset(void *pdst, int c, unsigned int plen)
{
/* Ok. Now we want the parameters put in special registers.
Make sure the compiler is able to make something useful of this. */
/* Now we want the parameters in special registers. Make sure the
compiler does something usable with this. */
register char *return_dst __asm__ ("r10") = pdst;
register int n __asm__ ("r12") = plen;
register int lc __asm__ ("r11") = c;
/* Most apps use memset sanely. Only those memsetting about 3..4
bytes or less get penalized compared to the generic implementation
- and that's not really sane use. */
/* Most apps use memset sanely. Memsetting about 3..4 bytes or less get
penalized here compared to the generic implementation. */
/* Ugh. This is fragile at best. Check with newer GCC releases, if
they compile cascaded "x |= x << 8" sanely! */
__asm__("movu.b %0,$r13 \n\
lslq 8,$r13 \n\
move.b %0,$r13 \n\
move.d $r13,%0 \n\
lslq 16,$r13 \n\
or.d $r13,%0"
: "=r" (lc) : "0" (lc) : "r13");
/* This is fragile performancewise at best. Check with newer GCC
releases, if they compile cascaded "x |= x << 8" to sane code. */
__asm__("movu.b %0,r13 \n\
lslq 8,r13 \n\
move.b %0,r13 \n\
move.d r13,%0 \n\
lslq 16,r13 \n\
or.d r13,%0"
: "=r" (lc) /* Inputs. */
: "0" (lc) /* Outputs. */
: "r13"); /* Trash. */
{
register char *dst __asm__ ("r13") = pdst;
/* This is NONPORTABLE, but since this whole routine is */
/* grossly nonportable that doesn't matter. */
if (((unsigned long) pdst & 3) != 0
/* Oops! n = 0 must be a valid call, regardless of alignment. */
&& n >= 3)
{
if ((unsigned long) dst & 1)
{
*dst = (char) lc;
n--;
dst++;
}
if (((unsigned long) pdst & 3) != 0
/* Oops! n=0 must be a legal call, regardless of alignment. */
&& n >= 3)
{
if ((unsigned long)dst & 1)
{
*dst = (char) lc;
n--;
dst++;
}
if ((unsigned long) dst & 2)
{
*(short *) dst = lc;
n -= 2;
dst += 2;
}
}
if ((unsigned long)dst & 2)
{
*(short *)dst = lc;
n -= 2;
dst += 2;
}
}
/* Now the fun part. For the threshold value of this, check the equation
above. */
/* Decide which copying method to use. */
if (n >= ZERO_BLOCK_SIZE)
{
/* For large copies we use 'movem' */
/* It is not optimal to tell the compiler about clobbering any
registers; that will move the saving/restoring of those registers
to the function prologue/epilogue, and make non-movem sizes
suboptimal.
This method is not foolproof; it assumes that the "asm reg"
declarations at the beginning of the function really are used
here (beware: they may be moved to temporary registers).
This way, we do not have to save/move the registers around into
temporaries; we can safely use them straight away.
If you want to check that the allocation was right; then
check the equalities in the first comment. It should say
"r13=r13, r12=r12, r11=r11" */
__asm__ volatile (" \n\
;; Check that the register asm declaration got right. \n\
;; The GCC manual says it will work, but there *has* been bugs. \n\
.ifnc %0-%1-%4,$r13-$r12-$r11 \n\
.err \n\
.endif \n\
/* Decide which setting method to use. */
if (n >= MEMSET_BY_BLOCK_THRESHOLD)
{
/* It is not optimal to tell the compiler about clobbering any
registers; that will move the saving/restoring of those registers
to the function prologue/epilogue, and make non-block sizes
suboptimal. */
__asm__ volatile
("\
;; GCC does promise correct register allocations, but let's \n\
;; make sure it keeps its promises. \n\
.ifnc %0-%1-%4,$r13-$r12-$r11 \n\
.error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\" \n\
.endif \n\
\n\
;; Save the registers we'll clobber in the movem process \n\
;; on the stack. Don't mention them to gcc, it will only be \n\
;; upset. \n\
subq 11*4,$sp \n\
movem $r10,[$sp] \n\
;; Save the registers we'll clobber in the movem process \n\
;; on the stack. Don't mention them to gcc, it will only be \n\
;; upset. \n\
subq 11*4,sp \n\
movem r10,[sp] \n\
\n\
move.d $r11,$r0 \n\
move.d $r11,$r1 \n\
move.d $r11,$r2 \n\
move.d $r11,$r3 \n\
move.d $r11,$r4 \n\
move.d $r11,$r5 \n\
move.d $r11,$r6 \n\
move.d $r11,$r7 \n\
move.d $r11,$r8 \n\
move.d $r11,$r9 \n\
move.d $r11,$r10 \n\
move.d r11,r0 \n\
move.d r11,r1 \n\
move.d r11,r2 \n\
move.d r11,r3 \n\
move.d r11,r4 \n\
move.d r11,r5 \n\
move.d r11,r6 \n\
move.d r11,r7 \n\
move.d r11,r8 \n\
move.d r11,r9 \n\
move.d r11,r10 \n\
\n\
;; Now we've got this: \n\
;; r13 - dst \n\
;; r12 - n \n\
;; Now we've got this: \n\
;; r13 - dst \n\
;; r12 - n \n\
\n\
;; Update n for the first loop \n\
subq 12*4,$r12 \n\
;; Update n for the first loop \n\
subq 12*4,r12 \n\
0: \n\
subq 12*4,$r12 \n\
bge 0b \n\
movem $r11,[$r13+] \n\
"
#ifdef __arch_common_v10_v32
/* Cater to branch offset difference between v32 and v10. We
assume the branch below has an 8-bit offset. */
" setf\n"
#endif
" subq 12*4,r12 \n\
bge 0b \n\
movem r11,[r13+] \n\
\n\
addq 12*4,$r12 ;; compensate for last loop underflowing n \n\
;; Compensate for last loop underflowing n. \n\
addq 12*4,r12 \n\
\n\
;; Restore registers from stack \n\
movem [$sp+],$r10"
;; Restore registers from stack. \n\
movem [sp+],r10"
/* Outputs */ : "=r" (dst), "=r" (n)
/* Inputs */ : "0" (dst), "1" (n), "r" (lc));
}
/* Outputs. */
: "=r" (dst), "=r" (n)
/* Either we directly starts copying, using dword copying
in a loop, or we copy as much as possible with 'movem'
and then the last block (<44 bytes) is copied here.
This will work since 'movem' will have updated src,dst,n. */
/* Inputs. */
: "0" (dst), "1" (n), "r" (lc));
}
while ( n >= 16 )
{
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
n -= 16;
}
/* An ad-hoc unroll, used for 4*12-1..16 bytes. */
while (n >= 16)
{
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
n -= 16;
}
/* A switch() is definitely the fastest although it takes a LOT of code.
* Particularly if you inline code this.
*/
switch (n)
{
{
case 0:
break;
case 1:
*(char*)dst = (char) lc;
*dst = (char) lc;
break;
case 2:
*(short*)dst = (short) lc;
*(short *) dst = (short) lc;
break;
case 3:
*((short*)dst)++ = (short) lc;
*(char*)dst = (char) lc;
*(short *) dst = (short) lc; dst += 2;
*dst = (char) lc;
break;
case 4:
*((long*)dst)++ = lc;
*(long *) dst = lc;
break;
case 5:
*((long*)dst)++ = lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*dst = (char) lc;
break;
case 6:
*((long*)dst)++ = lc;
*(short*)dst = (short) lc;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc;
break;
case 7:
*((long*)dst)++ = lc;
*((short*)dst)++ = (short) lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc; dst += 2;
*dst = (char) lc;
break;
case 8:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc;
break;
case 9:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*dst = (char) lc;
break;
case 10:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(short*)dst = (short) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc;
break;
case 11:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((short*)dst)++ = (short) lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc; dst += 2;
*dst = (char) lc;
break;
case 12:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc;
break;
case 13:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*dst = (char) lc;
break;
case 14:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*(short*)dst = (short) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc;
break;
case 15:
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((long*)dst)++ = lc;
*((short*)dst)++ = (short) lc;
*(char*)dst = (char) lc;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(long *) dst = lc; dst += 4;
*(short *) dst = (short) lc; dst += 2;
*dst = (char) lc;
break;
}
}
}
return return_dst; /* destination pointer. */
} /* memset() */
return return_dst;
}

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o

View File

@ -12,8 +12,6 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o

View File

@ -12,8 +12,6 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y += config.o

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
#obj-y := config.o usb-mcf532x.o spi-mcf532x.o
obj-y := config.o

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o

View File

@ -12,9 +12,7 @@
# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
#
ifdef CONFIG_FULLDEBUG
AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
endif
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += dma.o entry.o vectors.o
obj-$(CONFIG_M5206) += timers.o

View File

@ -197,14 +197,13 @@ ENTRY(fasthandler)
RESTORE_LOCAL
ENTRY(ret_from_interrupt)
jeq 2f
1:
RESTORE_ALL
2:
moveb %sp@(PT_SR),%d0
andl #0x7,%d0
jhi 1b
jeq 1f
RESTORE_ALL
1:
/* check if we need to do software interrupts */
movel irq_stat+CPUSTAT_SOFTIRQ_PENDING,%d0
jeq ret_from_exception

View File

@ -148,25 +148,32 @@ irqreturn_t coldfire_profile_tick(int irq, void *dummy)
/* Reset ColdFire timer2 */
__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
if (current->pid)
profile_tick(CPU_PROFILING, regs);
profile_tick(CPU_PROFILING);
return IRQ_HANDLED;
}
/***************************************************************************/
static struct irqaction coldfire_profile_irq = {
.name = "profile timer",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = coldfire_profile_tick,
};
void coldfire_profile_init(void)
{
printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ);
printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
PROFILEHZ);
setup_irq(mcf_profilevector, &coldfire_profile_irq);
/* Set up TIMER 2 as high speed profile clock */
__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
__raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
__raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
request_irq(mcf_profilevector, coldfire_profile_tick,
(IRQF_DISABLED | IRQ_FLG_FAST), "profile timer", NULL);
mcf_settimericr(2, 7);
}

View File

@ -694,7 +694,7 @@ asmlinkage int irix_statfs(const char __user *path,
if (error)
goto out;
error = vfs_statfs(nd.dentry, &kbuf);
error = vfs_statfs(nd.path.dentry, &kbuf);
if (error)
goto dput_and_out;
@ -711,7 +711,7 @@ asmlinkage int irix_statfs(const char __user *path,
}
dput_and_out:
path_release(&nd);
path_put(&nd.path);
out:
return error;
}
@ -1360,7 +1360,7 @@ asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
error = user_path_walk(fname, &nd);
if (error)
goto out;
error = vfs_statfs(nd.dentry, &kbuf);
error = vfs_statfs(nd.path.dentry, &kbuf);
if (error)
goto dput_and_out;
@ -1385,7 +1385,7 @@ asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
error |= __put_user(0, &buf->f_fstr[i]);
dput_and_out:
path_release(&nd);
path_put(&nd.path);
out:
return error;
}
@ -1611,7 +1611,7 @@ asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *
error = user_path_walk(fname, &nd);
if (error)
goto out;
error = vfs_statfs(nd.dentry, &kbuf);
error = vfs_statfs(nd.path.dentry, &kbuf);
if (error)
goto dput_and_out;
@ -1636,7 +1636,7 @@ asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *
error |= __put_user(0, &buf->f_fstr[i]);
dput_and_out:
path_release(&nd);
path_put(&nd.path);
out:
return error;
}

View File

@ -219,10 +219,10 @@ asmlinkage long hpux_statfs(const char __user *path,
error = user_path_walk(path, &nd);
if (!error) {
struct hpux_statfs tmp;
error = vfs_statfs_hpux(nd.dentry, &tmp);
error = vfs_statfs_hpux(nd.path.dentry, &tmp);
if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
error = -EFAULT;
path_release(&nd);
path_put(&nd.path);
}
return error;
}

View File

@ -442,10 +442,6 @@ config SECCOMP
If unsure, say Y. Only embedded should say N here.
config WANT_DEVICE_TREE
bool
default n
endmenu
config ISA_DMA_API

View File

@ -147,6 +147,8 @@ HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
targets += dtc-src/dtc-parser.tab.c
targets += dtc-src/dtc-lexer.lex.c
clean-files += dtc-src/dtc-parser.tab.h
ifdef DTC_GENPARSER
BISON = bison
FLEX = flex

View File

@ -145,7 +145,7 @@
.macro STORE_REGS_5_2
lwz r11, 16(r1)
std r4, 0(r11)
lwz r11, 24(r1)
lwz r11, 20(r1)
std r5, 0(r11)
.endm

View File

@ -104,3 +104,5 @@ quiet_cmd_systbl_chk = CALL $<
PHONY += systbl_chk
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
clean-files := vmlinux.lds

View File

@ -462,7 +462,7 @@ void show_regs(struct pt_regs * regs)
current, task_pid_nr(current), current->comm, task_thread_info(current));
#ifdef CONFIG_SMP
printk(" CPU: %d", smp_processor_id());
printk(" CPU: %d", raw_smp_processor_id());
#endif /* CONFIG_SMP */
for (i = 0; i < 32; i++) {

View File

@ -336,9 +336,9 @@ static unsigned long __init find_function32(struct lib32_elfinfo *lib,
return sym->st_value - VDSO32_LBASE;
}
static int vdso_do_func_patch32(struct lib32_elfinfo *v32,
struct lib64_elfinfo *v64,
const char *orig, const char *fix)
static int __init vdso_do_func_patch32(struct lib32_elfinfo *v32,
struct lib64_elfinfo *v64,
const char *orig, const char *fix)
{
Elf32_Sym *sym32_gen, *sym32_fix;
@ -433,9 +433,9 @@ static unsigned long __init find_function64(struct lib64_elfinfo *lib,
#endif
}
static int vdso_do_func_patch64(struct lib32_elfinfo *v32,
struct lib64_elfinfo *v64,
const char *orig, const char *fix)
static int __init vdso_do_func_patch64(struct lib32_elfinfo *v32,
struct lib64_elfinfo *v64,
const char *orig, const char *fix)
{
Elf64_Sym *sym64_gen, *sym64_fix;

View File

@ -198,14 +198,13 @@ out:
* dcookie user still being registered (namely, the reader
* of the event buffer).
*/
static inline unsigned long fast_get_dcookie(struct dentry *dentry,
struct vfsmount *vfsmnt)
static inline unsigned long fast_get_dcookie(struct path *path)
{
unsigned long cookie;
if (dentry->d_cookie)
return (unsigned long)dentry;
get_dcookie(dentry, vfsmnt, &cookie);
if (path->dentry->d_cookie)
return (unsigned long)path->dentry;
get_dcookie(path, &cookie);
return cookie;
}
@ -240,8 +239,7 @@ get_exec_dcookie_and_offset(struct spu *spu, unsigned int *offsetp,
continue;
if (!(vma->vm_flags & VM_EXECUTABLE))
continue;
app_cookie = fast_get_dcookie(vma->vm_file->f_dentry,
vma->vm_file->f_vfsmnt);
app_cookie = fast_get_dcookie(&vma->vm_file->f_path);
pr_debug("got dcookie for %s\n",
vma->vm_file->f_dentry->d_name.name);
app = vma->vm_file;
@ -262,8 +260,7 @@ get_exec_dcookie_and_offset(struct spu *spu, unsigned int *offsetp,
break;
}
*spu_bin_dcookie = fast_get_dcookie(vma->vm_file->f_dentry,
vma->vm_file->f_vfsmnt);
*spu_bin_dcookie = fast_get_dcookie(&vma->vm_file->f_path);
pr_debug("got dcookie for %s\n", vma->vm_file->f_dentry->d_name.name);
up_read(&mm->mmap_sem);

View File

@ -13,7 +13,6 @@ config MPC5121_ADS
bool "Freescale MPC5121E ADS"
depends on PPC_MULTIPLATFORM && PPC32
select DEFAULT_UIMAGE
select WANT_DEVICE_TREE
select PPC_MPC5121
help
This option enables support for the MPC5121E ADS board.

View File

@ -8,7 +8,6 @@ config PPC_MPC5200_SIMPLE
bool "Generic support for simple MPC5200 based boards"
depends on PPC_MPC52xx
select DEFAULT_UIMAGE
select WANT_DEVICE_TREE
help
This option enables support for a simple MPC52xx based boards which
do not need a custom platform specific setup. Such boards are
@ -35,7 +34,6 @@ config PPC_LITE5200
bool "Freescale Lite5200 Eval Board"
depends on PPC_MPC52xx
select DEFAULT_UIMAGE
select WANT_DEVICE_TREE
config PPC_MPC5200_BUGFIX
bool "MPC5200 (L25R) bugfix support"

View File

@ -15,7 +15,6 @@ config PPC_MULTIPLATFORM
config PPC_82xx
bool "Freescale 82xx"
depends on 6xx
select WANT_DEVICE_TREE
config PPC_83xx
bool "Freescale 83xx"
@ -23,7 +22,6 @@ config PPC_83xx
select FSL_SOC
select MPC83xx
select IPIC
select WANT_DEVICE_TREE
select FSL_EMB_PERFMON
config PPC_86xx

View File

@ -29,26 +29,22 @@ config PPC_85xx
bool "Freescale 85xx"
select E500
select FSL_SOC
select WANT_DEVICE_TREE
select MPC85xx
config PPC_8xx
bool "Freescale 8xx"
select FSL_SOC
select 8xx
select WANT_DEVICE_TREE
select PPC_LIB_RHEAP
config 40x
bool "AMCC 40x"
select PPC_DCR_NATIVE
select WANT_DEVICE_TREE
select PPC_UDBG_16550
config 44x
bool "AMCC 44x"
select PPC_DCR_NATIVE
select WANT_DEVICE_TREE
select PPC_UDBG_16550
config E200

View File

@ -1,4 +1,13 @@
#define DEBUG
/*
* Copyright 2006-2008, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/types.h>
#include <linux/kernel.h>

View File

@ -1,3 +1,4 @@
/*
* SPU file system
*
@ -592,7 +593,7 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
ret = -EINVAL;
/* check if we are on spufs */
if (nd->dentry->d_sb->s_type != &spufs_type)
if (nd->path.dentry->d_sb->s_type != &spufs_type)
goto out;
/* don't accept undefined flags */
@ -600,9 +601,9 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
goto out;
/* only threads can be underneath a gang */
if (nd->dentry != nd->dentry->d_sb->s_root) {
if (nd->path.dentry != nd->path.dentry->d_sb->s_root) {
if ((flags & SPU_CREATE_GANG) ||
!SPUFS_I(nd->dentry->d_inode)->i_gang)
!SPUFS_I(nd->path.dentry->d_inode)->i_gang)
goto out;
}
@ -618,16 +619,17 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
mode &= ~current->fs->umask;
if (flags & SPU_CREATE_GANG)
return spufs_create_gang(nd->dentry->d_inode,
dentry, nd->mnt, mode);
return spufs_create_gang(nd->path.dentry->d_inode,
dentry, nd->path.mnt, mode);
else
return spufs_create_context(nd->dentry->d_inode,
dentry, nd->mnt, flags, mode, filp);
return spufs_create_context(nd->path.dentry->d_inode,
dentry, nd->path.mnt, flags, mode,
filp);
out_dput:
dput(dentry);
out_dir:
mutex_unlock(&nd->dentry->d_inode->i_mutex);
mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
out:
return ret;
}

View File

@ -73,7 +73,7 @@ static long do_spu_create(const char __user *pathname, unsigned int flags,
LOOKUP_OPEN|LOOKUP_CREATE, &nd);
if (!ret) {
ret = spufs_create(&nd, flags, mode, neighbor);
path_release(&nd);
path_put(&nd.path);
}
putname(tmp);
}

View File

@ -24,7 +24,6 @@ config STORCENTER
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
select WANT_DEVICE_TREE
select MPC10X_OPENPIC
select MPC10X_BRIDGE
help
@ -37,7 +36,6 @@ config MPC7448HPC2
select TSI108_BRIDGE
select DEFAULT_UIMAGE
select PPC_UDBG_16550
select WANT_DEVICE_TREE
select TSI108_BRIDGE
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
@ -48,7 +46,6 @@ config PPC_HOLLY
depends on EMBEDDED6xx
select TSI108_BRIDGE
select PPC_UDBG_16550
select WANT_DEVICE_TREE
select TSI108_BRIDGE
help
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
@ -59,7 +56,6 @@ config PPC_PRPMC2800
depends on EMBEDDED6xx
select MV64X60
select NOT_COHERENT_CACHE
select WANT_DEVICE_TREE
help
This option enables support for the Motorola PrPMC2800 board

View File

@ -75,7 +75,7 @@ static struct property *new_property(const char *name, int length,
return np;
}
static void __init free_property(struct property *np)
static void free_property(struct property *np)
{
kfree(np);
}

View File

@ -93,6 +93,9 @@ config ARCH_NO_VIRT_TO_BUS
config ARCH_SUPPORTS_AOUT
def_bool y
config IO_TRAPPED
bool
source "init/Kconfig"
menu "System type"
@ -312,6 +315,13 @@ config CPU_SUBTYPE_SH7722
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
config CPU_SUBTYPE_SH7366
bool "Support SH7366 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
# SH-5 Processor Support
config CPU_SUBTYPE_SH5_101
@ -456,6 +466,7 @@ config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
select IO_TRAPPED
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
@ -472,6 +483,14 @@ config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
select IO_TRAPPED
config SH_MIGOR
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
help
Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd.
config SH_EDOSK7705
bool "EDOSK7705"

View File

@ -12,6 +12,7 @@ config CPU_LITTLE_ENDIAN
config CPU_BIG_ENDIAN
bool "Big Endian"
depends on !CPU_SH5
endchoice
@ -87,9 +88,6 @@ config SH64_ID2815_WORKAROUND
config CPU_HAS_INTEVT
bool
config CPU_HAS_MASKREG_IRQ
bool
config CPU_HAS_IPR_IRQ
bool

View File

@ -29,7 +29,8 @@ config EARLY_SCIF_CONSOLE
config EARLY_SCIF_CONSOLE_PORT
hex
depends on EARLY_SCIF_CONSOLE
default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
default "0xffe00000" if CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
default "0xffea0000" if CPU_SUBTYPE_SH7785
default "0xfffe8000" if CPU_SUBTYPE_SH7203
default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263

View File

@ -116,6 +116,7 @@ machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh
machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705
machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp
machdir-$(CONFIG_SH_MIGOR) += renesas/migor
machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780
machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw
machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto

View File

@ -0,0 +1 @@
obj-y := setup.o

View File

@ -0,0 +1,61 @@
/*
* Renesas System Solutions Asia Pte. Ltd - Migo-R
*
* Copyright (C) 2008 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <asm/machvec.h>
#include <asm/io.h>
/* Address IRQ Size Bus Description
* 0x00000000 64MB 16 NOR Flash (SP29PL256N)
* 0x0c000000 64MB 64 SDRAM (2xK4M563233G)
* 0x10000000 IRQ0 16 Ethernet (SMC91C111)
* 0x14000000 IRQ4 16 USB 2.0 Host Controller (M66596)
* 0x18000000 8GB 8 NAND Flash (K9K8G08U0A)
*/
static struct resource smc91x_eth_resources[] = {
[0] = {
.name = "smc91x-regs" ,
.start = P2SEGADDR(0x10000300),
.end = P2SEGADDR(0x1000030f),
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 32, /* IRQ0 */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
},
};
static struct platform_device smc91x_eth_device = {
.name = "smc91x",
.num_resources = ARRAY_SIZE(smc91x_eth_resources),
.resource = smc91x_eth_resources,
};
static struct platform_device *migor_devices[] __initdata = {
&smc91x_eth_device,
};
static int __init migor_devices_setup(void)
{
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
__initcall(migor_devices_setup);
static void __init migor_setup(char **cmdline_p)
{
ctrl_outw(0x1000, 0xa4050110); /* Enable IRQ0 in PJCR */
}
static struct sh_machine_vector mv_migor __initmv = {
.mv_name = "Migo-R",
.mv_setup = migor_setup,
};

View File

@ -23,6 +23,7 @@
#include <asm/clock.h>
#include <asm/heartbeat.h>
#include <asm/io.h>
#include <asm/io_trapped.h>
static struct resource r8a66597_usb_host_resources[] = {
[0] = {
@ -181,13 +182,27 @@ static struct platform_device *r7780rp_devices[] __initdata = {
&m66592_usb_peripheral_device,
&heartbeat_device,
#ifndef CONFIG_SH_R7780RP
&cf_ide_device,
&ax88796_device,
#endif
};
/*
* The CF is connected using a 16-bit bus where 8-bit operations are
* unsupported. The linux ata driver is however using 8-bit operations, so
* insert a trapped io filter to convert 8-bit operations into 16-bit.
*/
static struct trapped_io cf_trapped_io = {
.resource = cf_ide_resources,
.num_resources = 2,
.minimum_bus_width = 16,
};
static int __init r7780rp_devices_setup(void)
{
#ifndef CONFIG_SH_R7780RP
if (register_trapped_io(&cf_trapped_io) == 0)
platform_device_register(&cf_ide_device);
#endif
return platform_add_devices(r7780rp_devices,
ARRAY_SIZE(r7780rp_devices));
}
@ -226,34 +241,6 @@ static void r7780rp_power_off(void)
ctrl_outw(0x0001, PA_POFF);
}
static inline unsigned char is_ide_ioaddr(unsigned long addr)
{
return ((cf_ide_resources[0].start <= addr &&
addr <= cf_ide_resources[0].end) ||
(cf_ide_resources[1].start <= addr &&
addr <= cf_ide_resources[1].end));
}
void highlander_writeb(u8 b, void __iomem *addr)
{
unsigned long tmp = (unsigned long __force)addr;
if (is_ide_ioaddr(tmp))
ctrl_outw((u16)b, tmp);
else
ctrl_outb(b, tmp);
}
u8 highlander_readb(void __iomem *addr)
{
unsigned long tmp = (unsigned long __force)addr;
if (is_ide_ioaddr(tmp))
return ctrl_inw(tmp) & 0xff;
else
return ctrl_inb(tmp);
}
/*
* Initialize the board
*/
@ -338,6 +325,4 @@ static struct sh_machine_vector mv_highlander __initmv = {
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
.mv_irq_demux = highlander_irq_demux,
.mv_readb = highlander_readb,
.mv_writeb = highlander_writeb,
};

View File

@ -21,6 +21,7 @@
#include <asm/machvec.h>
#include <asm/rts7751r2d.h>
#include <asm/io.h>
#include <asm/io_trapped.h>
#include <asm/spi.h>
static struct resource cf_ide_resources[] = {
@ -214,13 +215,25 @@ static struct platform_device *rts7751r2d_devices[] __initdata = {
&uart_device,
&sm501_device,
#endif
&cf_ide_device,
&heartbeat_device,
&spi_sh_sci_device,
};
/*
* The CF is connected with a 16-bit bus where 8-bit operations are
* unsupported. The linux ata driver is however using 8-bit operations, so
* insert a trapped io filter to convert 8-bit operations into 16-bit.
*/
static struct trapped_io cf_trapped_io = {
.resource = cf_ide_resources,
.num_resources = 2,
.minimum_bus_width = 16,
};
static int __init rts7751r2d_devices_setup(void)
{
if (register_trapped_io(&cf_trapped_io) == 0)
platform_device_register(&cf_ide_device);
spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
return platform_add_devices(rts7751r2d_devices,
ARRAY_SIZE(rts7751r2d_devices));
@ -232,34 +245,6 @@ static void rts7751r2d_power_off(void)
ctrl_outw(0x0001, PA_POWOFF);
}
static inline unsigned char is_ide_ioaddr(unsigned long addr)
{
return ((cf_ide_resources[0].start <= addr &&
addr <= cf_ide_resources[0].end) ||
(cf_ide_resources[1].start <= addr &&
addr <= cf_ide_resources[1].end));
}
void rts7751r2d_writeb(u8 b, void __iomem *addr)
{
unsigned long tmp = (unsigned long __force)addr;
if (is_ide_ioaddr(tmp))
ctrl_outw((u16)b, tmp);
else
ctrl_outb(b, tmp);
}
u8 rts7751r2d_readb(void __iomem *addr)
{
unsigned long tmp = (unsigned long __force)addr;
if (is_ide_ioaddr(tmp))
return ctrl_inw(tmp) & 0xff;
else
return ctrl_inb(tmp);
}
/*
* Initialize the board
*/
@ -310,6 +295,4 @@ static struct sh_machine_vector mv_rts7751r2d __initmv = {
.mv_setup = rts7751r2d_setup,
.mv_init_irq = init_rts7751r2d_IRQ,
.mv_irq_demux = rts7751r2d_irq_demux,
.mv_writeb = rts7751r2d_writeb,
.mv_readb = rts7751r2d_readb,
};

View File

@ -4,13 +4,6 @@ choice
prompt "SDK7780 options"
default SH_SDK7780_BASE
config SH_SDK7780_STANDALONE
bool "SDK7780 board support"
depends on CPU_SUBTYPE_SH7780
help
Selecting this option will enable support for the
standalone version of the SDK7780. If in doubt, say Y.
config SH_SDK7780_BASE
bool "SDK7780 with base-board support"
depends on CPU_SUBTYPE_SH7780

View File

@ -17,10 +17,8 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hd64465/hd64465.h>
static void disable_hd64465_irq(unsigned int irq)
@ -28,51 +26,45 @@ static void disable_hd64465_irq(unsigned int irq)
unsigned short nimr;
unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
nimr = inw(HD64465_REG_NIMR);
nimr |= mask;
outw(nimr, HD64465_REG_NIMR);
}
static void enable_hd64465_irq(unsigned int irq)
{
unsigned short nimr;
unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
nimr = inw(HD64465_REG_NIMR);
nimr &= ~mask;
outw(nimr, HD64465_REG_NIMR);
}
static void mask_and_ack_hd64465(unsigned int irq)
{
disable_hd64465_irq(irq);
}
static void end_hd64465_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_hd64465_irq(irq);
}
static unsigned int startup_hd64465_irq(unsigned int irq)
{
{
enable_hd64465_irq(irq);
return 0;
}
static void shutdown_hd64465_irq(unsigned int irq)
{
disable_hd64465_irq(irq);
}
static struct hw_interrupt_type hd64465_irq_type = {
.typename = "HD64465-IRQ",
.startup = startup_hd64465_irq,
@ -83,7 +75,6 @@ static struct hw_interrupt_type hd64465_irq_type = {
.end = end_hd64465_irq,
};
static irqreturn_t hd64465_interrupt(int irq, void *dev_id)
{
printk(KERN_INFO
@ -93,9 +84,6 @@ static irqreturn_t hd64465_interrupt(int irq, void *dev_id)
return IRQ_NONE;
}
/*====================================================*/
/*
* Support for a secondary IRQ demux step. This is necessary
* because the HD64465 presents a very thin interface to the
@ -103,8 +91,7 @@ static irqreturn_t hd64465_interrupt(int irq, void *dev_id)
* normally done in hardware by other PCMCIA host bridges is
* instead done in software.
*/
static struct
{
static struct {
int (*func)(int, void *);
void *dev;
} hd64465_demux[HD64465_IRQ_NUM];
@ -112,19 +99,17 @@ static struct
void hd64465_register_irq_demux(int irq,
int (*demux)(int irq, void *dev), void *dev)
{
hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;
hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;
hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;
hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;
}
EXPORT_SYMBOL(hd64465_register_irq_demux);
void hd64465_unregister_irq_demux(int irq)
{
hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;
hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;
}
EXPORT_SYMBOL(hd64465_unregister_irq_demux);
int hd64465_irq_demux(int irq)
{
if (irq == CONFIG_HD64465_IRQ) {
@ -132,16 +117,16 @@ int hd64465_irq_demux(int irq)
unsigned short nirr = inw(HD64465_REG_NIRR);
unsigned short nimr = inw(HD64465_REG_NIMR);
pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);
pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);
nirr &= ~nimr;
for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++)
if (nirr & bit)
break;
break;
if (i < HD64465_IRQ_NUM) {
if (i < HD64465_IRQ_NUM) {
irq = HD64465_IRQ_BASE + i;
if (hd64465_demux[i].func != 0)
irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);
if (hd64465_demux[i].func != 0)
irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);
}
}
return irq;
@ -154,7 +139,6 @@ static struct irqaction irq0 = {
.name = "HD64465",
};
static int __init setup_hd64465(void)
{
int i;
@ -176,8 +160,8 @@ static int __init setup_hd64465(void)
rev = inw(HD64465_REG_SRR);
printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff);
outw(0xffff, HD64465_REG_NIMR); /* mask all interrupts */
outw(0xffff, HD64465_REG_NIMR); /* mask all interrupts */
for (i = 0; i < HD64465_IRQ_NUM ; i++) {
irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type;
@ -185,16 +169,13 @@ static int __init setup_hd64465(void)
setup_irq(CONFIG_HD64465_IRQ, &irq0);
#ifdef CONFIG_SERIAL
/* wake up the UART from STANDBY at this point */
smscr = inw(HD64465_REG_SMSCR);
outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR);
/* remap IO ports for first ISA serial port to HD64465 UART */
hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
#endif
return 0;
}
module_init(setup_hd64465);

View File

@ -0,0 +1,824 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24
# Wed Feb 6 21:52:20 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_KPROBES is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
#
# System type
#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
CONFIG_CPU_SH4AL_DSP=y
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_29BIT=y
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=1
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_MAX_ACTIVE_REGIONS=2
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
CONFIG_CACHE_WRITEBACK=y
# CONFIG_CACHE_WRITETHROUGH is not set
# CONFIG_CACHE_OFF is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_SH_FPU_EMU is not set
CONFIG_SH_DSP=y
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
CONFIG_CPU_HAS_DSP=y
#
# Board support
#
# CONFIG_SH_7722_SOLUTION_ENGINE is not set
CONFIG_SH_MIGOR=y
#
# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=33333333
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# DMA support
#
# CONFIG_SH_DMA is not set
#
# Companion Chips
#
#
# Additional SuperH Device Drivers
#
# CONFIG_HEARTBEAT is not set
# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
#
# Bus options
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
CONFIG_SUPERH_BUILT_IN_M66592=y
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
CONFIG_USB_G_SERIAL=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
CONFIG_EARLY_PRINTK=y
# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

View File

@ -1,9 +1,10 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc2
# Tue Aug 14 18:04:44 2007
# Linux kernel version: 2.6.24
# Thu Feb 7 16:25:55 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@ -36,9 +37,14 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@ -53,6 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@ -65,6 +72,13 @@ CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_KPROBES is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@ -91,13 +105,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
#
# System type
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@ -105,6 +123,8 @@ CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@ -113,14 +133,15 @@ CONFIG_CPU_SH4=y
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
@ -130,6 +151,7 @@ CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_29BIT=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
@ -147,6 +169,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@ -168,23 +191,22 @@ CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SH_FPU=y
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
CONFIG_CPU_HAS_FPU=y
#
# Board support
#
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_SECUREEDGE5410 is not set
# CONFIG_SH_HS7751RVOIP is not set
CONFIG_SH_RTS7751R2D=y
# CONFIG_SH_LANDISK is not set
# CONFIG_SH_TITAN is not set
# CONFIG_SH_LBOX_RE2 is not set
#
# RTS7751R2D options
# RTS7751R2D Board Revision
#
# CONFIG_RTS7751R2D_PLUS is not set
CONFIG_RTS7751R2D_1=y
@ -198,6 +220,7 @@ CONFIG_SH_PCLK_FREQ=60000000
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@ -227,11 +250,15 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
#
# Boot options
@ -250,10 +277,7 @@ CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
@ -281,6 +305,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@ -299,6 +324,7 @@ CONFIG_IP_FIB_HASH=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -324,10 +350,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
@ -335,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -356,6 +379,7 @@ CONFIG_WIRELESS_EXT=y
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
@ -371,6 +395,7 @@ CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
@ -420,6 +445,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
@ -493,7 +519,9 @@ CONFIG_ATA=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@ -508,14 +536,7 @@ CONFIG_ATA=y
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@ -530,25 +551,31 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_ENC28J60 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@ -560,6 +587,7 @@ CONFIG_8139TOO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@ -570,6 +598,10 @@ CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@ -577,6 +609,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@ -585,11 +618,15 @@ CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@ -597,13 +634,21 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@ -622,7 +667,6 @@ CONFIG_INPUT=y
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@ -650,6 +694,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
@ -674,11 +719,9 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@ -687,16 +730,30 @@ CONFIG_DEVPORT=y
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_SH_SCI=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
@ -708,6 +765,13 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
@ -720,16 +784,12 @@ CONFIG_MFD_SM501=y
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
@ -738,6 +798,7 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@ -777,6 +838,12 @@ CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@ -844,6 +911,7 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
@ -868,6 +936,7 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@ -885,15 +954,26 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# SPI devices
#
#
# SUPERH devices
#
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
@ -903,6 +983,10 @@ CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# SoC Audio support for SuperH
#
#
# ALSA SoC audio for Freescale SOCs
#
#
# Open Sound System
#
@ -914,19 +998,104 @@ CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
@ -949,13 +1118,17 @@ CONFIG_RTC_INTF_DEV=y
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -963,20 +1136,7 @@ CONFIG_RTC_INTF_DEV=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
# CONFIG_RTC_DRV_SH is not set
#
# Userspace I/O
@ -1034,7 +1194,6 @@ CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@ -1053,10 +1212,7 @@ CONFIG_RAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
@ -1070,10 +1226,6 @@ CONFIG_RAMFS=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@ -1114,30 +1266,22 @@ CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
@ -1149,7 +1293,53 @@ CONFIG_EARLY_PRINTK=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_CRYPTO is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines

View File

@ -1,9 +1,10 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc2
# Tue Aug 14 16:33:08 2007
# Linux kernel version: 2.6.24
# Thu Feb 7 16:17:47 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@ -36,9 +37,14 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@ -53,6 +59,7 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@ -65,6 +72,13 @@ CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_KPROBES is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@ -91,13 +105,17 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
#
# System type
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@ -105,6 +123,8 @@ CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@ -113,14 +133,15 @@ CONFIG_CPU_SH4=y
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
@ -130,6 +151,7 @@ CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
CONFIG_29BIT=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
@ -147,6 +169,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@ -168,23 +191,22 @@ CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SH_FPU=y
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
CONFIG_CPU_HAS_FPU=y
#
# Board support
#
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_SECUREEDGE5410 is not set
# CONFIG_SH_HS7751RVOIP is not set
CONFIG_SH_RTS7751R2D=y
# CONFIG_SH_LANDISK is not set
# CONFIG_SH_TITAN is not set
# CONFIG_SH_LBOX_RE2 is not set
#
# RTS7751R2D options
# RTS7751R2D Board Revision
#
CONFIG_RTS7751R2D_PLUS=y
# CONFIG_RTS7751R2D_1 is not set
@ -198,6 +220,7 @@ CONFIG_SH_PCLK_FREQ=60000000
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@ -227,11 +250,15 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
#
# Boot options
@ -250,10 +277,7 @@ CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
@ -281,6 +305,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@ -299,6 +324,7 @@ CONFIG_IP_FIB_HASH=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -324,10 +350,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
@ -335,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -356,6 +379,7 @@ CONFIG_WIRELESS_EXT=y
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
@ -371,6 +395,7 @@ CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
@ -420,6 +445,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
@ -493,7 +519,9 @@ CONFIG_ATA=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@ -508,14 +536,7 @@ CONFIG_ATA=y
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@ -530,25 +551,31 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_ENC28J60 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@ -560,6 +587,7 @@ CONFIG_8139TOO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@ -570,6 +598,10 @@ CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@ -577,6 +609,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@ -585,11 +618,15 @@ CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
@ -597,13 +634,21 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@ -622,7 +667,6 @@ CONFIG_INPUT=y
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@ -650,6 +694,7 @@ CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
@ -674,11 +719,9 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@ -687,16 +730,30 @@ CONFIG_DEVPORT=y
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_SH_SCI=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
@ -708,6 +765,13 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
@ -720,16 +784,12 @@ CONFIG_MFD_SM501=y
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
@ -738,6 +798,7 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@ -777,6 +838,12 @@ CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@ -844,6 +911,7 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
@ -868,6 +936,7 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
@ -885,15 +954,26 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# SPI devices
#
#
# SUPERH devices
#
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
@ -903,6 +983,10 @@ CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# SoC Audio support for SuperH
#
#
# ALSA SoC audio for Freescale SOCs
#
#
# Open Sound System
#
@ -914,19 +998,104 @@ CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
@ -949,13 +1118,17 @@ CONFIG_RTC_INTF_DEV=y
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -963,20 +1136,7 @@ CONFIG_RTC_INTF_DEV=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
# CONFIG_RTC_DRV_SH is not set
#
# Userspace I/O
@ -1034,7 +1194,6 @@ CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@ -1053,10 +1212,7 @@ CONFIG_RAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
@ -1070,10 +1226,6 @@ CONFIG_RAMFS=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@ -1114,30 +1266,22 @@ CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
@ -1149,7 +1293,53 @@ CONFIG_EARLY_PRINTK=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_CRYPTO is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines

View File

@ -231,7 +231,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_SH_DSP is not set
# CONFIG_SH_ADC is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_PINT_IRQ=y
CONFIG_CPU_HAS_IPR_IRQ=y
CONFIG_CPU_HAS_SR_RB=y

View File

@ -350,7 +350,7 @@ int register_dmac(struct dma_info *info)
BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
info->pdev = platform_device_register_simple((char *)info->name, -1,
info->pdev = platform_device_register_simple(info->name, -1,
NULL, 0);
if (IS_ERR(info->pdev))
return PTR_ERR(info->pdev);

View File

@ -18,7 +18,7 @@ int pci_fixup_pcic(void)
{
unsigned long bcr1, mcr;
bcr1 = inl(SH7751_BCR1);
bcr1 = ctrl_inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
pci_write_reg(bcr1, SH4_PCIBCR1);
@ -28,7 +28,7 @@ int pci_fixup_pcic(void)
pci_write_reg(0xfb900047, SH7751_PCICONF1);
pci_write_reg(0xab000001, SH7751_PCICONF4);
mcr = inl(SH7751_MCR);
mcr = ctrl_inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
pci_write_reg(mcr, SH4_PCIMCR);

View File

@ -19,7 +19,7 @@ int pci_fixup_pcic(void)
{
unsigned long bcr1, mcr;
bcr1 = inl(SH7751_BCR1);
bcr1 = ctrl_inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
pci_write_reg(bcr1, SH4_PCIBCR1);
@ -30,7 +30,7 @@ int pci_fixup_pcic(void)
pci_write_reg(0xfb900047, SH7751_PCICONF1);
pci_write_reg(0xab000001, SH7751_PCICONF4);
mcr = inl(SH7751_MCR);
mcr = ctrl_inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
pci_write_reg(mcr, SH4_PCIMCR);

View File

@ -83,9 +83,9 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
case 1: *val = ctrl_inb(GAPSPCI_BBA_CONFIG+where); break;
case 2: *val = ctrl_inw(GAPSPCI_BBA_CONFIG+where); break;
case 4: *val = ctrl_inl(GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
@ -97,9 +97,9 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
case 1: ctrl_outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
case 2: ctrl_outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
case 4: ctrl_outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
@ -127,36 +127,36 @@ int __init gapspci_init(void)
*/
for (i=0; i<16; i++)
idbuf[i] = inb(GAPSPCI_REGS+i);
idbuf[i] = ctrl_inb(GAPSPCI_REGS+i);
if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
return -ENODEV;
outl(0x5a14a501, GAPSPCI_REGS+0x18);
ctrl_outl(0x5a14a501, GAPSPCI_REGS+0x18);
for (i=0; i<1000000; i++)
;
if (inl(GAPSPCI_REGS+0x18) != 1)
if (ctrl_inl(GAPSPCI_REGS+0x18) != 1)
return -EINVAL;
outl(0x01000000, GAPSPCI_REGS+0x20);
outl(0x01000000, GAPSPCI_REGS+0x24);
ctrl_outl(0x01000000, GAPSPCI_REGS+0x20);
ctrl_outl(0x01000000, GAPSPCI_REGS+0x24);
outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
ctrl_outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
ctrl_outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
outl(1, GAPSPCI_REGS+0x14);
outl(1, GAPSPCI_REGS+0x34);
ctrl_outl(1, GAPSPCI_REGS+0x14);
ctrl_outl(1, GAPSPCI_REGS+0x34);
/* Setting Broadband Adapter */
outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
ctrl_outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
ctrl_outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
ctrl_outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
ctrl_outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
ctrl_outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
ctrl_outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
ctrl_outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
return 0;
}

View File

@ -33,7 +33,7 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
static struct resource sh7751_io_resource = {
.name = "SH7751_IO",
.start = 0x4000,
.end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
.end = SH7751_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
@ -68,6 +68,7 @@ static struct sh4_pci_address_map sh7751_pci_map = {
int __init pcibios_init_platform(void)
{
__set_io_port_base(SH7751_PCI_IO_BASE);
return sh7751_pcic_init(&sh7751_pci_map);
}

View File

@ -172,11 +172,11 @@ struct sh4_pci_address_map {
static inline void pci_write_reg(unsigned long val, unsigned long reg)
{
outl(val, PCI_REG(reg));
ctrl_outl(val, PCI_REG(reg));
}
static inline unsigned long pci_read_reg(unsigned long reg)
{
return inl(PCI_REG(reg));
return ctrl_inl(PCI_REG(reg));
}
#endif /* __PCI_SH4_H */

View File

@ -58,7 +58,7 @@ static int __init __area_sdram_check(unsigned int area)
{
u32 word;
word = inl(SH7751_BCR1);
word = ctrl_inl(SH7751_BCR1);
/* check BCR for SDRAM in area */
if (((word >> area) & 1) == 0) {
printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
@ -67,7 +67,7 @@ static int __init __area_sdram_check(unsigned int area)
}
pci_write_reg(word, SH4_PCIBCR1);
word = (u16)inw(SH7751_BCR2);
word = (u16)ctrl_inw(SH7751_BCR2);
/* check BCR2 for 32bit SDRAM interface*/
if (((word >> (area << 1)) & 0x3) != 0x3) {
printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
@ -85,9 +85,9 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
u32 word;
/* Set the BCR's to enable PCI access */
reg = inl(SH7751_BCR1);
reg = ctrl_inl(SH7751_BCR1);
reg |= 0x80000;
outl(reg, SH7751_BCR1);
ctrl_outl(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
pci_write_reg(0, SH4_PCICLKR);
@ -179,13 +179,13 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
return 0;
/* configure the wait control registers */
word = inl(SH7751_WCR1);
word = ctrl_inl(SH7751_WCR1);
pci_write_reg(word, SH4_PCIWCR1);
word = inl(SH7751_WCR2);
word = ctrl_inl(SH7751_WCR2);
pci_write_reg(word, SH4_PCIWCR2);
word = inl(SH7751_WCR3);
word = ctrl_inl(SH7751_WCR3);
pci_write_reg(word, SH4_PCIWCR3);
word = inl(SH7751_MCR);
word = ctrl_inl(SH7751_MCR);
pci_write_reg(word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..

View File

@ -52,7 +52,7 @@ static int __init sh7780_pci_init(void)
pr_debug("PCI: Starting intialization.\n");
outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
/* check for SH7780/SH7780R hardware */
id = pci_read_reg(SH7780_PCIVID);

View File

@ -22,5 +22,6 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_BINFMT_ELF) += dump_task.o
obj-$(CONFIG_IO_TRAPPED) += io_trapped.o
EXTRA_CFLAGS += -Werror

View File

@ -18,5 +18,6 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_BINFMT_ELF) += dump_task.o
obj-$(CONFIG_IO_TRAPPED) += io_trapped.o
EXTRA_CFLAGS += -Werror

View File

@ -6,4 +6,3 @@ obj-y += intc.o
obj-$(CONFIG_SUPERH32) += imask.o
obj-$(CONFIG_CPU_SH5) += intc-sh5.o
obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o

View File

@ -75,21 +75,6 @@ int intc_evt_to_irq[(0xE20/0x20)+1] = {
-1, -1 /* 0xE00 - 0xE20 */
};
/*
* Opposite mapper.
*/
static int IRQ_to_vectorN[NR_INTC_IRQS] = {
0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /* 0- 7 */
-1, -1, -1, -1, 0x50, 0x51, 0x52, 0x53, /* 8-15 */
0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36, -1, /* 16-23 */
-1, -1, -1, -1, -1, -1, -1, -1, /* 24-31 */
0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */
0x39, 0x3A, 0x3B, -1, -1, -1, -1, -1, /* 40-47 */
-1, -1, -1, -1, -1, -1, -1, -1, /* 48-55 */
-1, -1, -1, -1, -1, -1, -1, 0x2B, /* 56-63 */
};
static unsigned long intc_virt;
static unsigned int startup_intc_irq(unsigned int irq);
@ -176,6 +161,18 @@ void make_intc_irq(unsigned int irq)
}
#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
static int IRQ_to_vectorN[NR_INTC_IRQS] = {
0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /* 0- 7 */
-1, -1, -1, -1, 0x50, 0x51, 0x52, 0x53, /* 8-15 */
0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36, -1, /* 16-23 */
-1, -1, -1, -1, -1, -1, -1, -1, /* 24-31 */
0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */
0x39, 0x3A, 0x3B, -1, -1, -1, -1, -1, /* 40-47 */
-1, -1, -1, -1, -1, -1, -1, -1, /* 48-55 */
-1, -1, -1, -1, -1, -1, -1, 0x2B, /* 56-63 */
};
int intc_irq_describe(char* p, int irq)
{
if (irq < NR_INTC_IRQS)

View File

@ -1,93 +0,0 @@
/*
* Interrupt handling for Simple external interrupt mask register
*
* Copyright (C) 2001 A&D Co., Ltd. <http://www.aandd.co.jp>
*
* This is for the machine which have single 16 bit register
* for masking external IRQ individually.
* Each bit of the register is for masking each interrupt.
*
* This file may be copied or modified under the terms of the GNU
* General Public License. See linux/COPYING for more information.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/system.h>
#include <asm/io.h>
/* address of external interrupt mask register */
unsigned long irq_mask_register;
/* forward declaration */
static unsigned int startup_maskreg_irq(unsigned int irq);
static void shutdown_maskreg_irq(unsigned int irq);
static void enable_maskreg_irq(unsigned int irq);
static void disable_maskreg_irq(unsigned int irq);
static void mask_and_ack_maskreg(unsigned int);
static void end_maskreg_irq(unsigned int irq);
/* hw_interrupt_type */
static struct hw_interrupt_type maskreg_irq_type = {
.typename = "Mask Register",
.startup = startup_maskreg_irq,
.shutdown = shutdown_maskreg_irq,
.enable = enable_maskreg_irq,
.disable = disable_maskreg_irq,
.ack = mask_and_ack_maskreg,
.end = end_maskreg_irq
};
/* actual implementation */
static unsigned int startup_maskreg_irq(unsigned int irq)
{
enable_maskreg_irq(irq);
return 0; /* never anything pending */
}
static void shutdown_maskreg_irq(unsigned int irq)
{
disable_maskreg_irq(irq);
}
static void disable_maskreg_irq(unsigned int irq)
{
unsigned short val, mask = 0x01 << irq;
BUG_ON(!irq_mask_register);
/* Set "irq"th bit */
val = ctrl_inw(irq_mask_register);
val |= mask;
ctrl_outw(val, irq_mask_register);
}
static void enable_maskreg_irq(unsigned int irq)
{
unsigned short val, mask = ~(0x01 << irq);
BUG_ON(!irq_mask_register);
/* Clear "irq"th bit */
val = ctrl_inw(irq_mask_register);
val &= mask;
ctrl_outw(val, irq_mask_register);
}
static void mask_and_ack_maskreg(unsigned int irq)
{
disable_maskreg_irq(irq);
}
static void end_maskreg_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_maskreg_irq(irq);
}
void make_maskreg_irq(unsigned int irq)
{
disable_irq_nosync(irq);
irq_desc[irq].handler = &maskreg_irq_type;
disable_maskreg_irq(irq);
}

View File

@ -126,12 +126,18 @@ int __init detect_cpu_and_cache_system(void)
CPU_HAS_LLSC;
break;
case 0x3008:
if (prr == 0xa0) {
if (prr == 0xa0 || prr == 0xa1) {
boot_cpu_data.type = CPU_SH7722;
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
}
else if (prr == 0x70) {
boot_cpu_data.type = CPU_SH7366;
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
}
break;
case 0x4000: /* 1st cut */
case 0x4001: /* 2nd cut */

View File

@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
# SMP setup
@ -21,6 +22,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
obj-y += $(clock-y)

View File

@ -1,7 +1,7 @@
/*
* arch/sh/kernel/cpu/sh4a/clock-sh7722.c
*
* SH7722 support for the clock framework
* SH7722 & SH7366 support for the clock framework
*
* Copyright (c) 2006-2007 Nomad Global Solutions Inc
* Based on code for sh7343 by Paul Mundt
@ -417,15 +417,19 @@ static int sh7722_siu_which(struct clk *clk)
return 0;
if (!strcmp(clk->name, "siu_b_clk"))
return 1;
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
if (!strcmp(clk->name, "irda_clk"))
return 2;
#endif
return -EINVAL;
}
static unsigned long sh7722_siu_regs[] = {
[0] = SCLKACR,
[1] = SCLKBCR,
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
[2] = IrDACLKCR,
#endif
};
static int sh7722_siu_start_stop(struct clk *clk, int enable)
@ -571,10 +575,12 @@ static struct clk sh7722_siu_b_clock = {
.ops = &sh7722_siu_clk_ops,
};
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
static struct clk sh7722_irda_clock = {
.name = "irda_clk",
.ops = &sh7722_siu_clk_ops,
};
#endif
static struct clk sh7722_video_clock = {
.name = "video_clk",
@ -588,7 +594,9 @@ static struct clk *sh7722_clocks[] = {
&sh7722_sdram_clock,
&sh7722_siu_a_clock,
&sh7722_siu_b_clock,
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
&sh7722_irda_clock,
#endif
&sh7722_video_clock,
};

View File

@ -0,0 +1,177 @@
/*
* SH7366 Setup
*
* Copyright (C) 2008 Renesas Solutions
*
* Based on linux/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 80, 80, 80, 80 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct platform_device *sh7366_devices[] __initdata = {
&sci_device,
};
static int __init sh7366_devices_setup(void)
{
return platform_add_devices(sh7366_devices,
ARRAY_SIZE(sh7366_devices));
}
__initcall(sh7366_devices_setup);
enum {
UNUSED=0,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
ICB,
DMAC0, DMAC1, DMAC2, DMAC3,
VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
MFI, VPU, USB,
MMC_MMC1I, MMC_MMC2I, MMC_MMC3I,
DMAC4, DMAC5, DMAC_DADERR,
SCIF, SCIFA1, SCIFA2,
DENC, MSIOF,
FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
SDHI0, SDHI1, SDHI2, SDHI3,
CMT, TSIF, SIU,
TMU0, TMU1, TMU2,
VEU2, LCDC,
/* interrupt groups */
DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C, SDHI,
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
INTC_VECT(ICB, 0x700),
INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), INTC_VECT(USB, 0xa20),
INTC_VECT(MMC_MMC1I, 0xb00), INTC_VECT(MMC_MMC2I, 0xb20),
INTC_VECT(MMC_MMC3I, 0xb40),
INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
INTC_VECT(DMAC_DADERR, 0xbc0),
INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIFA1, 0xc20),
INTC_VECT(SCIFA2, 0xc40),
INTC_VECT(DENC, 0xc60), INTC_VECT(MSIOF, 0xc80),
INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
INTC_VECT(SIU, 0xf80),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2, 0x440),
INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
INTC_GROUP(MMC, MMC_MMC1I, MMC_MMC2I, MMC_MMC3I),
INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
{ } },
{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
{ VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
{ 0, 0, 0, VPU, 0, 0, 0, MFI } },
{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
{ 0, 0, 0, ICB } },
{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
{ 0, TMU2, TMU1, TMU0, VEU2, 0, 0, LCDC } },
{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
{ 0, DMAC_DADERR, DMAC5, DMAC4, DENC, SCIFA2, SCIFA1, SCIF } },
{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
{ 0, 0, 0, 0, 0, 0, 0, MSIOF } },
{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
{ SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT, 0, USB, } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
{ 0, MMC_MMC3I, MMC_MMC2I, MMC_MMC1I } },
{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
{ 0, 0, 0, 0, 0, 0, 0, TSIF } },
{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
{ 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2, LCDC, ICB } },
{ 0xa4080008, 0, 16, 4, /* IPRC */ { } },
{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
{ 0xa4080014, 0, 16, 4, /* IPRF */ { 0, DMAC45, USB, CMT } },
{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIFA1, SCIFA2, DENC } },
{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF, 0, FLCTL, I2C } },
{ 0xa4080020, 0, 16, 4, /* IPRI */ { 0, 0, TSIF, } },
{ 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } },
{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
{ 0xa408002c, 0, 16, 4, /* IPRL */ { } },
{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_sense_reg sense_registers[] __initdata = {
{ 0xa414001c, 16, 2, /* ICR1 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups,
mask_registers, prio_registers, sense_registers);
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
}
void __init plat_mem_setup(void)
{
/* TODO: Register Node 1 */
}

View File

@ -20,19 +20,18 @@ int __init detect_cpu_and_cache_system(void)
{
unsigned long long cir;
/* Do peeks in real mode to avoid having to set up a mapping for the
WPC registers. On SH5-101 cut2, such a mapping would be exposed to
an address translation erratum which would make it hard to set up
correctly. */
/*
* Do peeks in real mode to avoid having to set up a mapping for
* the WPC registers. On SH5-101 cut2, such a mapping would be
* exposed to an address translation erratum which would make it
* hard to set up correctly.
*/
cir = peek_real_address_q(0x0d000008);
if ((cir & 0xffff) == 0x5103) {
if ((cir & 0xffff) == 0x5103)
boot_cpu_data.type = CPU_SH5_103;
} else if (((cir >> 32) & 0xffff) == 0x51e2) {
else if (((cir >> 32) & 0xffff) == 0x51e2)
/* CPU.VCR aliased at CIR address on SH5-101 */
boot_cpu_data.type = CPU_SH5_101;
} else {
boot_cpu_data.type = CPU_SH_NONE;
}
/*
* First, setup some sane values for the I-cache.
@ -40,37 +39,33 @@ int __init detect_cpu_and_cache_system(void)
boot_cpu_data.icache.ways = 4;
boot_cpu_data.icache.sets = 256;
boot_cpu_data.icache.linesz = L1_CACHE_BYTES;
#if 0
/*
* FIXME: This can probably be cleaned up a bit as well.. for example,
* do we really need the way shift _and_ the way_step_shift ?? Judging
* by the existing code, I would guess no.. is there any valid reason
* why we need to be tracking this around?
*/
boot_cpu_data.icache.way_shift = 13;
boot_cpu_data.icache.way_incr = (1 << 13);
boot_cpu_data.icache.entry_shift = 5;
boot_cpu_data.icache.set_shift = 4;
boot_cpu_data.icache.way_step_shift = 16;
boot_cpu_data.icache.asid_shift = 2;
/*
* way offset = cache size / associativity, so just don't factor in
* associativity in the first place..
*/
boot_cpu_data.icache.way_ofs = boot_cpu_data.icache.sets *
boot_cpu_data.icache.linesz;
boot_cpu_data.icache.asid_mask = 0x3fc;
boot_cpu_data.icache.idx_mask = 0x1fe0;
boot_cpu_data.icache.epn_mask = 0xffffe000;
#endif
boot_cpu_data.icache.way_size = boot_cpu_data.icache.sets *
boot_cpu_data.icache.linesz;
boot_cpu_data.icache.entry_mask = 0x1fe0;
boot_cpu_data.icache.flags = 0;
/* A trivial starting point.. */
memcpy(&boot_cpu_data.dcache,
&boot_cpu_data.icache, sizeof(struct cache_info));
/*
* Next, setup some sane values for the D-cache.
*
* On the SH5, these are pretty consistent with the I-cache settings,
* so we just copy over the existing definitions.. these can be fixed
* up later, especially if we add runtime CPU probing.
*
* Though in the meantime it saves us from having to duplicate all of
* the above definitions..
*/
boot_cpu_data.dcache = boot_cpu_data.icache;
/*
* Setup any cache-related flags here
*/
#if defined(CONFIG_CACHE_WRITETHROUGH)
set_bit(SH_CACHE_MODE_WT, &(boot_cpu_data.dcache.flags));
#elif defined(CONFIG_CACHE_WRITEBACK)
set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags));
#endif
return 0;
}

View File

@ -63,7 +63,13 @@ EXPORT_SYMBOL(memset_io);
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
return sh_mv.mv_ioport_map(port, nr);
void __iomem *ret;
ret = __ioport_map_trapped(port, nr);
if (ret)
return ret;
return __ioport_map(port, nr);
}
EXPORT_SYMBOL(ioport_map);

View File

@ -33,17 +33,17 @@ static inline void delay(void)
u8 generic_inb(unsigned long port)
{
return ctrl_inb((unsigned long __force)ioport_map(port, 1));
return ctrl_inb((unsigned long __force)__ioport_map(port, 1));
}
u16 generic_inw(unsigned long port)
{
return ctrl_inw((unsigned long __force)ioport_map(port, 2));
return ctrl_inw((unsigned long __force)__ioport_map(port, 2));
}
u32 generic_inl(unsigned long port)
{
return ctrl_inl((unsigned long __force)ioport_map(port, 4));
return ctrl_inl((unsigned long __force)__ioport_map(port, 4));
}
u8 generic_inb_p(unsigned long port)
@ -81,7 +81,7 @@ void generic_insb(unsigned long port, void *dst, unsigned long count)
volatile u8 *port_addr;
u8 *buf = dst;
port_addr = (volatile u8 *)ioport_map(port, 1);
port_addr = (volatile u8 *)__ioport_map(port, 1);
while (count--)
*buf++ = *port_addr;
}
@ -91,7 +91,7 @@ void generic_insw(unsigned long port, void *dst, unsigned long count)
volatile u16 *port_addr;
u16 *buf = dst;
port_addr = (volatile u16 *)ioport_map(port, 2);
port_addr = (volatile u16 *)__ioport_map(port, 2);
while (count--)
*buf++ = *port_addr;
@ -103,7 +103,7 @@ void generic_insl(unsigned long port, void *dst, unsigned long count)
volatile u32 *port_addr;
u32 *buf = dst;
port_addr = (volatile u32 *)ioport_map(port, 4);
port_addr = (volatile u32 *)__ioport_map(port, 4);
while (count--)
*buf++ = *port_addr;
@ -112,17 +112,17 @@ void generic_insl(unsigned long port, void *dst, unsigned long count)
void generic_outb(u8 b, unsigned long port)
{
ctrl_outb(b, (unsigned long __force)ioport_map(port, 1));
ctrl_outb(b, (unsigned long __force)__ioport_map(port, 1));
}
void generic_outw(u16 b, unsigned long port)
{
ctrl_outw(b, (unsigned long __force)ioport_map(port, 2));
ctrl_outw(b, (unsigned long __force)__ioport_map(port, 2));
}
void generic_outl(u32 b, unsigned long port)
{
ctrl_outl(b, (unsigned long __force)ioport_map(port, 4));
ctrl_outl(b, (unsigned long __force)__ioport_map(port, 4));
}
void generic_outb_p(u8 b, unsigned long port)
@ -153,7 +153,7 @@ void generic_outsb(unsigned long port, const void *src, unsigned long count)
volatile u8 *port_addr;
const u8 *buf = src;
port_addr = (volatile u8 __force *)ioport_map(port, 1);
port_addr = (volatile u8 __force *)__ioport_map(port, 1);
while (count--)
*port_addr = *buf++;
@ -164,7 +164,7 @@ void generic_outsw(unsigned long port, const void *src, unsigned long count)
volatile u16 *port_addr;
const u16 *buf = src;
port_addr = (volatile u16 __force *)ioport_map(port, 2);
port_addr = (volatile u16 __force *)__ioport_map(port, 2);
while (count--)
*port_addr = *buf++;
@ -177,7 +177,7 @@ void generic_outsl(unsigned long port, const void *src, unsigned long count)
volatile u32 *port_addr;
const u32 *buf = src;
port_addr = (volatile u32 __force *)ioport_map(port, 4);
port_addr = (volatile u32 __force *)__ioport_map(port, 4);
while (count--)
*port_addr = *buf++;

276
arch/sh/kernel/io_trapped.c Normal file
View File

@ -0,0 +1,276 @@
/*
* Trapped io support
*
* Copyright (C) 2008 Magnus Damm
*
* Intercept io operations by trapping.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/bitops.h>
#include <linux/vmalloc.h>
#include <linux/module.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/io_trapped.h>
#define TRAPPED_PAGES_MAX 16
#ifdef CONFIG_HAS_IOPORT
LIST_HEAD(trapped_io);
EXPORT_SYMBOL_GPL(trapped_io);
#endif
#ifdef CONFIG_HAS_IOMEM
LIST_HEAD(trapped_mem);
EXPORT_SYMBOL_GPL(trapped_mem);
#endif
static DEFINE_SPINLOCK(trapped_lock);
int __init register_trapped_io(struct trapped_io *tiop)
{
struct resource *res;
unsigned long len = 0, flags = 0;
struct page *pages[TRAPPED_PAGES_MAX];
int k, n;
/* structure must be page aligned */
if ((unsigned long)tiop & (PAGE_SIZE - 1))
goto bad;
for (k = 0; k < tiop->num_resources; k++) {
res = tiop->resource + k;
len += roundup((res->end - res->start) + 1, PAGE_SIZE);
flags |= res->flags;
}
/* support IORESOURCE_IO _or_ MEM, not both */
if (hweight_long(flags) != 1)
goto bad;
n = len >> PAGE_SHIFT;
if (n >= TRAPPED_PAGES_MAX)
goto bad;
for (k = 0; k < n; k++)
pages[k] = virt_to_page(tiop);
tiop->virt_base = vmap(pages, n, VM_MAP, PAGE_NONE);
if (!tiop->virt_base)
goto bad;
len = 0;
for (k = 0; k < tiop->num_resources; k++) {
res = tiop->resource + k;
pr_info("trapped io 0x%08lx overrides %s 0x%08lx\n",
(unsigned long)(tiop->virt_base + len),
res->flags & IORESOURCE_IO ? "io" : "mmio",
(unsigned long)res->start);
len += roundup((res->end - res->start) + 1, PAGE_SIZE);
}
tiop->magic = IO_TRAPPED_MAGIC;
INIT_LIST_HEAD(&tiop->list);
spin_lock_irq(&trapped_lock);
if (flags & IORESOURCE_IO)
list_add(&tiop->list, &trapped_io);
if (flags & IORESOURCE_MEM)
list_add(&tiop->list, &trapped_mem);
spin_unlock_irq(&trapped_lock);
return 0;
bad:
pr_warning("unable to install trapped io filter\n");
return -1;
}
EXPORT_SYMBOL_GPL(register_trapped_io);
void __iomem *match_trapped_io_handler(struct list_head *list,
unsigned long offset,
unsigned long size)
{
unsigned long voffs;
struct trapped_io *tiop;
struct resource *res;
int k, len;
spin_lock_irq(&trapped_lock);
list_for_each_entry(tiop, list, list) {
voffs = 0;
for (k = 0; k < tiop->num_resources; k++) {
res = tiop->resource + k;
if (res->start == offset) {
spin_unlock_irq(&trapped_lock);
return tiop->virt_base + voffs;
}
len = (res->end - res->start) + 1;
voffs += roundup(len, PAGE_SIZE);
}
}
spin_unlock_irq(&trapped_lock);
return NULL;
}
EXPORT_SYMBOL_GPL(match_trapped_io_handler);
static struct trapped_io *lookup_tiop(unsigned long address)
{
pgd_t *pgd_k;
pud_t *pud_k;
pmd_t *pmd_k;
pte_t *pte_k;
pte_t entry;
pgd_k = swapper_pg_dir + pgd_index(address);
if (!pgd_present(*pgd_k))
return NULL;
pud_k = pud_offset(pgd_k, address);
if (!pud_present(*pud_k))
return NULL;
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
return NULL;
pte_k = pte_offset_kernel(pmd_k, address);
entry = *pte_k;
return pfn_to_kaddr(pte_pfn(entry));
}
static unsigned long lookup_address(struct trapped_io *tiop,
unsigned long address)
{
struct resource *res;
unsigned long vaddr = (unsigned long)tiop->virt_base;
unsigned long len;
int k;
for (k = 0; k < tiop->num_resources; k++) {
res = tiop->resource + k;
len = roundup((res->end - res->start) + 1, PAGE_SIZE);
if (address < (vaddr + len))
return res->start + (address - vaddr);
vaddr += len;
}
return 0;
}
static unsigned long long copy_word(unsigned long src_addr, int src_len,
unsigned long dst_addr, int dst_len)
{
unsigned long long tmp = 0;
switch (src_len) {
case 1:
tmp = ctrl_inb(src_addr);
break;
case 2:
tmp = ctrl_inw(src_addr);
break;
case 4:
tmp = ctrl_inl(src_addr);
break;
case 8:
tmp = ctrl_inq(src_addr);
break;
}
switch (dst_len) {
case 1:
ctrl_outb(tmp, dst_addr);
break;
case 2:
ctrl_outw(tmp, dst_addr);
break;
case 4:
ctrl_outl(tmp, dst_addr);
break;
case 8:
ctrl_outq(tmp, dst_addr);
break;
}
return tmp;
}
static unsigned long from_device(void *dst, const void *src, unsigned long cnt)
{
struct trapped_io *tiop;
unsigned long src_addr = (unsigned long)src;
unsigned long long tmp;
pr_debug("trapped io read 0x%08lx (%ld)\n", src_addr, cnt);
tiop = lookup_tiop(src_addr);
WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
src_addr = lookup_address(tiop, src_addr);
if (!src_addr)
return cnt;
tmp = copy_word(src_addr,
max_t(unsigned long, cnt,
(tiop->minimum_bus_width / 8)),
(unsigned long)dst, cnt);
pr_debug("trapped io read 0x%08lx -> 0x%08llx\n", src_addr, tmp);
return 0;
}
static unsigned long to_device(void *dst, const void *src, unsigned long cnt)
{
struct trapped_io *tiop;
unsigned long dst_addr = (unsigned long)dst;
unsigned long long tmp;
pr_debug("trapped io write 0x%08lx (%ld)\n", dst_addr, cnt);
tiop = lookup_tiop(dst_addr);
WARN_ON(!tiop || (tiop->magic != IO_TRAPPED_MAGIC));
dst_addr = lookup_address(tiop, dst_addr);
if (!dst_addr)
return cnt;
tmp = copy_word((unsigned long)src, cnt,
dst_addr, max_t(unsigned long, cnt,
(tiop->minimum_bus_width / 8)));
pr_debug("trapped io write 0x%08lx -> 0x%08llx\n", dst_addr, tmp);
return 0;
}
static struct mem_access trapped_io_access = {
from_device,
to_device,
};
int handle_trapped_io(struct pt_regs *regs, unsigned long address)
{
mm_segment_t oldfs;
opcode_t instruction;
int tmp;
if (!lookup_tiop(address))
return 0;
WARN_ON(user_mode(regs));
oldfs = get_fs();
set_fs(KERNEL_DS);
if (copy_from_user(&instruction, (void *)(regs->pc),
sizeof(instruction))) {
set_fs(oldfs);
return 0;
}
tmp = handle_unaligned_access(instruction, regs, &trapped_io_access);
set_fs(oldfs);
return tmp == 0;
}

View File

@ -248,9 +248,6 @@ asmlinkage void do_softirq(void)
void __init init_IRQ(void)
{
#ifdef CONFIG_CPU_HAS_PINT_IRQ
init_IRQ_pint();
#endif
plat_irq_setup();
/* Perform the machine specific initialisation */

View File

@ -623,6 +623,7 @@ extern void interruptible_sleep_on(wait_queue_head_t *q);
#define mid_sched ((unsigned long) interruptible_sleep_on)
#ifdef CONFIG_FRAME_POINTER
static int in_sh64_switch_to(unsigned long pc)
{
extern char __sh64_switch_to_end;
@ -631,12 +632,10 @@ static int in_sh64_switch_to(unsigned long pc)
return (pc >= (unsigned long) sh64_switch_to) &&
(pc < (unsigned long) &__sh64_switch_to_end);
}
#endif
unsigned long get_wchan(struct task_struct *p)
{
unsigned long schedule_fp;
unsigned long sh64_switch_to_fp;
unsigned long schedule_caller_pc;
unsigned long pc;
if (!p || p == current || p->state == TASK_RUNNING)
@ -649,6 +648,10 @@ unsigned long get_wchan(struct task_struct *p)
#ifdef CONFIG_FRAME_POINTER
if (in_sh64_switch_to(pc)) {
unsigned long schedule_fp;
unsigned long sh64_switch_to_fp;
unsigned long schedule_caller_pc;
sh64_switch_to_fp = (long) p->thread.sp;
/* r14 is saved at offset 4 in the sh64_switch_to frame */
schedule_fp = *(unsigned long *) (long)(sh64_switch_to_fp + 4);

View File

@ -220,7 +220,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
dp = ((unsigned long) child) + THREAD_SIZE -
sizeof(struct pt_dspregs);
if (*((int *) (dp - 4)) == SR_FD) {
copy_to_user(addr, (void *) dp,
copy_to_user((void *)addr, (void *) dp,
sizeof(struct pt_dspregs));
ret = 0;
}
@ -234,7 +234,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
dp = ((unsigned long) child) + THREAD_SIZE -
sizeof(struct pt_dspregs);
if (*((int *) (dp - 4)) == SR_FD) {
copy_from_user((void *) dp, addr,
copy_from_user((void *) dp, (void *)addr,
sizeof(struct pt_dspregs));
ret = 0;
}

View File

@ -333,7 +333,7 @@ static const char *cpu_name[] = {
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_SH_NONE] = "Unknown"
[CPU_SH7366] = "SH7366", [CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)

View File

@ -338,6 +338,8 @@ ENTRY(sys_call_table)
.long sys_epoll_pwait
.long sys_utimensat /* 320 */
.long sys_signalfd
.long sys_ni_syscall
.long sys_timerfd_create
.long sys_eventfd
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime

View File

@ -376,6 +376,8 @@ sys_call_table:
.long sys_epoll_pwait
.long sys_utimensat
.long sys_signalfd
.long sys_ni_syscall /* 350 */
.long sys_timerfd_create /* 350 */
.long sys_eventfd
.long sys_fallocate
.long sys_timerfd_settime
.long sys_timerfd_gettime

View File

@ -120,10 +120,6 @@ static long last_rtc_update;
*/
void handle_timer_tick(void)
{
do_timer(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
if (current->pid)
profile_tick(CPU_PROFILING);
@ -132,6 +128,16 @@ void handle_timer_tick(void)
sh_mv.mv_heartbeat();
#endif
/*
* Here we are in the timer irq handler. We just have irqs locally
* disabled but we don't know if the timer_bh is running on the other
* CPU. We need to avoid to SMP race with it. NOTE: we don' t need
* the irq version of write_lock because as just said we have irq
* locally disabled. -arca
*/
write_seqlock(&xtime_lock);
do_timer(1);
/*
* If we have an externally synchronized Linux clock, then update
* RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
@ -147,6 +153,11 @@ void handle_timer_tick(void)
/* do it again in 60s */
last_rtc_update = xtime.tv_sec - 600;
}
write_sequnlock(&xtime_lock);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
}
#endif /* !CONFIG_GENERIC_CLOCKEVENTS */

View File

@ -229,15 +229,22 @@ static long last_rtc_update;
static inline void do_timer_interrupt(void)
{
unsigned long long current_ctc;
if (current->pid)
profile_tick(CPU_PROFILING);
/*
* Here we are in the timer irq handler. We just have irqs locally
* disabled but we don't know if the timer_bh is running on the other
* CPU. We need to avoid to SMP race with it. NOTE: we don' t need
* the irq version of write_lock because as just said we have irq
* locally disabled. -arca
*/
write_lock(&xtime_lock);
asm ("getcon cr62, %0" : "=r" (current_ctc));
ctc_last_interrupt = (unsigned long) current_ctc;
do_timer(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
if (current->pid)
profile_tick(CPU_PROFILING);
#ifdef CONFIG_HEARTBEAT
if (sh_mv.mv_heartbeat != NULL)
@ -259,6 +266,11 @@ static inline void do_timer_interrupt(void)
/* do it again in 60 s */
last_rtc_update = xtime.tv_sec - 600;
}
write_unlock(&xtime_lock);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
}
/*
@ -275,16 +287,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
timer_status &= ~0x100;
ctrl_outw(timer_status, TMU0_TCR);
/*
* Here we are in the timer irq handler. We just have irqs locally
* disabled but we don't know if the timer_bh is running on the other
* CPU. We need to avoid to SMP race with it. NOTE: we don' t need
* the irq version of write_lock because as just said we have irq
* locally disabled. -arca
*/
write_lock(&xtime_lock);
do_timer_interrupt();
write_unlock(&xtime_lock);
return IRQ_HANDLED;
}

View File

@ -154,7 +154,6 @@ static int mtu2_timer_stop(void)
static int mtu2_timer_init(void)
{
u8 tmp;
unsigned long interval;
setup_irq(CONFIG_SH_TIMER_IRQ, &mtu2_irq);

View File

@ -147,6 +147,36 @@ static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
return -EFAULT;
}
static inline void sign_extend(unsigned int count, unsigned char *dst)
{
#ifdef __LITTLE_ENDIAN__
if ((count == 1) && dst[0] & 0x80) {
dst[1] = 0xff;
dst[2] = 0xff;
dst[3] = 0xff;
}
if ((count == 2) && dst[1] & 0x80) {
dst[2] = 0xff;
dst[3] = 0xff;
}
#else
if ((count == 1) && dst[3] & 0x80) {
dst[2] = 0xff;
dst[1] = 0xff;
dst[0] = 0xff;
}
if ((count == 2) && dst[2] & 0x80) {
dst[1] = 0xff;
dst[0] = 0xff;
}
#endif
}
static struct mem_access user_mem_access = {
copy_from_user,
copy_to_user,
};
/*
* handle an instruction that does an unaligned memory access by emulating the
* desired behaviour
@ -154,7 +184,8 @@ static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
* (if that instruction is in a branch delay slot)
* - return 0 if emulation okay, -EFAULT on existential error
*/
static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
struct mem_access *ma)
{
int ret, index, count;
unsigned long *rm, *rn;
@ -178,25 +209,13 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
dst = (unsigned char*) rn;
*(unsigned long*)dst = 0;
#ifdef __LITTLE_ENDIAN__
if (copy_from_user(dst, src, count))
goto fetch_fault;
if ((count == 2) && dst[1] & 0x80) {
dst[2] = 0xff;
dst[3] = 0xff;
}
#else
#if !defined(__LITTLE_ENDIAN__)
dst += 4-count;
if (__copy_user(dst, src, count))
#endif
if (ma->from(dst, src, count))
goto fetch_fault;
if ((count == 2) && dst[2] & 0x80) {
dst[0] = 0xff;
dst[1] = 0xff;
}
#endif
sign_extend(count, dst);
} else {
/* to memory */
src = (unsigned char*) rm;
@ -206,7 +225,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
dst = (unsigned char*) *rn;
dst += regs->regs[0];
if (copy_to_user(dst, src, count))
if (ma->to(dst, src, count))
goto fetch_fault;
}
ret = 0;
@ -217,7 +236,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
dst = (unsigned char*) *rn;
dst += (instruction&0x000F)<<2;
if (copy_to_user(dst,src,4))
if (ma->to(dst, src, 4))
goto fetch_fault;
ret = 0;
break;
@ -230,7 +249,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
#if !defined(__LITTLE_ENDIAN__)
src += 4-count;
#endif
if (copy_to_user(dst, src, count))
if (ma->to(dst, src, count))
goto fetch_fault;
ret = 0;
break;
@ -241,7 +260,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
dst = (unsigned char*) rn;
*(unsigned long*)dst = 0;
if (copy_from_user(dst,src,4))
if (ma->from(dst, src, 4))
goto fetch_fault;
ret = 0;
break;
@ -253,25 +272,12 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
dst = (unsigned char*) rn;
*(unsigned long*)dst = 0;
#ifdef __LITTLE_ENDIAN__
if (copy_from_user(dst, src, count))
goto fetch_fault;
if ((count == 2) && dst[1] & 0x80) {
dst[2] = 0xff;
dst[3] = 0xff;
}
#else
#if !defined(__LITTLE_ENDIAN__)
dst += 4-count;
if (copy_from_user(dst, src, count))
goto fetch_fault;
if ((count == 2) && dst[2] & 0x80) {
dst[0] = 0xff;
dst[1] = 0xff;
}
#endif
if (ma->from(dst, src, count))
goto fetch_fault;
sign_extend(count, dst);
ret = 0;
break;
@ -285,7 +291,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
dst = (unsigned char*) *rm; /* called Rn in the spec */
dst += (instruction&0x000F)<<1;
if (copy_to_user(dst, src, 2))
if (ma->to(dst, src, 2))
goto fetch_fault;
ret = 0;
break;
@ -299,21 +305,9 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
#if !defined(__LITTLE_ENDIAN__)
dst += 2;
#endif
if (copy_from_user(dst, src, 2))
if (ma->from(dst, src, 2))
goto fetch_fault;
#ifdef __LITTLE_ENDIAN__
if (dst[1] & 0x80) {
dst[2] = 0xff;
dst[3] = 0xff;
}
#else
if (dst[2] & 0x80) {
dst[0] = 0xff;
dst[1] = 0xff;
}
#endif
sign_extend(2, dst);
ret = 0;
break;
}
@ -332,11 +326,14 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs)
* emulate the instruction in the delay slot
* - fetches the instruction from PC+2
*/
static inline int handle_unaligned_delayslot(struct pt_regs *regs)
static inline int handle_delayslot(struct pt_regs *regs,
opcode_t old_instruction,
struct mem_access *ma)
{
u16 instruction;
opcode_t instruction;
void *addr = (void *)(regs->pc + instruction_size(old_instruction));
if (copy_from_user(&instruction, (u16 *)(regs->pc+2), 2)) {
if (copy_from_user(&instruction, addr, sizeof(instruction))) {
/* the instruction-fetch faulted */
if (user_mode(regs))
return -EFAULT;
@ -346,7 +343,7 @@ static inline int handle_unaligned_delayslot(struct pt_regs *regs)
regs, 0);
}
return handle_unaligned_ins(instruction,regs);
return handle_unaligned_ins(instruction, regs, ma);
}
/*
@ -369,10 +366,11 @@ static inline int handle_unaligned_delayslot(struct pt_regs *regs)
* XXX: SH-2A needs this too, but it needs an overhaul thanks to mixed 32-bit
* opcodes..
*/
#ifndef CONFIG_CPU_SH2A
static int handle_unaligned_notify_count = 10;
static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
struct mem_access *ma)
{
u_int rm;
int ret, index;
@ -387,7 +385,7 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
printk(KERN_NOTICE "Fixing up unaligned userspace access "
"in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
current->comm, task_pid_nr(current),
(u16 *)regs->pc, instruction);
(void *)regs->pc, instruction);
}
ret = -EFAULT;
@ -395,19 +393,19 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
case 0x0000:
if (instruction==0x000B) {
/* rts */
ret = handle_unaligned_delayslot(regs);
ret = handle_delayslot(regs, instruction, ma);
if (ret==0)
regs->pc = regs->pr;
}
else if ((instruction&0x00FF)==0x0023) {
/* braf @Rm */
ret = handle_unaligned_delayslot(regs);
ret = handle_delayslot(regs, instruction, ma);
if (ret==0)
regs->pc += rm + 4;
}
else if ((instruction&0x00FF)==0x0003) {
/* bsrf @Rm */
ret = handle_unaligned_delayslot(regs);
ret = handle_delayslot(regs, instruction, ma);
if (ret==0) {
regs->pr = regs->pc + 4;
regs->pc += rm + 4;
@ -428,13 +426,13 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
case 0x4000:
if ((instruction&0x00FF)==0x002B) {
/* jmp @Rm */
ret = handle_unaligned_delayslot(regs);
ret = handle_delayslot(regs, instruction, ma);
if (ret==0)
regs->pc = rm;
}
else if ((instruction&0x00FF)==0x000B) {
/* jsr @Rm */
ret = handle_unaligned_delayslot(regs);
ret = handle_delayslot(regs, instruction, ma);
if (ret==0) {
regs->pr = regs->pc + 4;
regs->pc = rm;
@ -461,7 +459,7 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
case 0x0B00: /* bf lab - no delayslot*/
break;
case 0x0F00: /* bf/s lab */
ret = handle_unaligned_delayslot(regs);
ret = handle_delayslot(regs, instruction, ma);
if (ret==0) {
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
if ((regs->sr & 0x00000001) != 0)
@ -474,7 +472,7 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
case 0x0900: /* bt lab - no delayslot */
break;
case 0x0D00: /* bt/s lab */
ret = handle_unaligned_delayslot(regs);
ret = handle_delayslot(regs, instruction, ma);
if (ret==0) {
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
if ((regs->sr & 0x00000001) == 0)
@ -488,13 +486,13 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
break;
case 0xA000: /* bra label */
ret = handle_unaligned_delayslot(regs);
ret = handle_delayslot(regs, instruction, ma);
if (ret==0)
regs->pc += SH_PC_12BIT_OFFSET(instruction);
break;
case 0xB000: /* bsr label */
ret = handle_unaligned_delayslot(regs);
ret = handle_delayslot(regs, instruction, ma);
if (ret==0) {
regs->pr = regs->pc + 4;
regs->pc += SH_PC_12BIT_OFFSET(instruction);
@ -505,12 +503,11 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs)
/* handle non-delay-slot instruction */
simple:
ret = handle_unaligned_ins(instruction,regs);
ret = handle_unaligned_ins(instruction, regs, ma);
if (ret==0)
regs->pc += instruction_size(instruction);
return ret;
}
#endif /* CONFIG_CPU_SH2A */
#ifdef CONFIG_CPU_HAS_SR_RB
#define lookup_exception_vector(x) \
@ -538,10 +535,8 @@ asmlinkage void do_address_error(struct pt_regs *regs,
unsigned long error_code = 0;
mm_segment_t oldfs;
siginfo_t info;
#ifndef CONFIG_CPU_SH2A
u16 instruction;
opcode_t instruction;
int tmp;
#endif
/* Intentional ifdef */
#ifdef CONFIG_CPU_HAS_SR_RB
@ -561,9 +556,9 @@ asmlinkage void do_address_error(struct pt_regs *regs,
goto uspace_segv;
}
#ifndef CONFIG_CPU_SH2A
set_fs(USER_DS);
if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) {
if (copy_from_user(&instruction, (void *)(regs->pc),
sizeof(instruction))) {
/* Argh. Fault on the instruction itself.
This should never happen non-SMP
*/
@ -571,13 +566,12 @@ asmlinkage void do_address_error(struct pt_regs *regs,
goto uspace_segv;
}
tmp = handle_unaligned_access(instruction, regs);
tmp = handle_unaligned_access(instruction, regs,
&user_mem_access);
set_fs(oldfs);
if (tmp==0)
return; /* sorted */
#endif
uspace_segv:
printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "
"access (PC %lx PR %lx)\n", current->comm, regs->pc,
@ -592,9 +586,9 @@ uspace_segv:
if (regs->pc & 1)
die("unaligned program counter", regs, error_code);
#ifndef CONFIG_CPU_SH2A
set_fs(KERNEL_DS);
if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) {
if (copy_from_user(&instruction, (void *)(regs->pc),
sizeof(instruction))) {
/* Argh. Fault on the instruction itself.
This should never happen non-SMP
*/
@ -602,14 +596,8 @@ uspace_segv:
die("insn faulting in do_address_error", regs, 0);
}
handle_unaligned_access(instruction, regs);
handle_unaligned_access(instruction, regs, &user_mem_access);
set_fs(oldfs);
#else
printk(KERN_NOTICE "Killing process \"%s\" due to unaligned "
"access\n", current->comm);
force_sig(SIGSEGV, current);
#endif
}
}

View File

@ -630,7 +630,7 @@ static int misaligned_fpu_load(struct pt_regs *regs,
current->thread.fpu.hard.fp_regs[destreg] = buflo;
current->thread.fpu.hard.fp_regs[destreg+1] = bufhi;
} else {
#if defined(CONFIG_LITTLE_ENDIAN)
#if defined(CONFIG_CPU_LITTLE_ENDIAN)
current->thread.fpu.hard.fp_regs[destreg] = bufhi;
current->thread.fpu.hard.fp_regs[destreg+1] = buflo;
#else
@ -700,7 +700,7 @@ static int misaligned_fpu_store(struct pt_regs *regs,
buflo = current->thread.fpu.hard.fp_regs[srcreg];
bufhi = current->thread.fpu.hard.fp_regs[srcreg+1];
} else {
#if defined(CONFIG_LITTLE_ENDIAN)
#if defined(CONFIG_CPU_LITTLE_ENDIAN)
bufhi = current->thread.fpu.hard.fp_regs[srcreg];
buflo = current->thread.fpu.hard.fp_regs[srcreg+1];
#else

View File

@ -51,7 +51,7 @@ SECTIONS
KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
#ifdef CONFIG_LITTLE_ENDIAN
#ifdef CONFIG_CPU_LITTLE_ENDIAN
} = 0x6ff0fff0
#else
} = 0xf0fff06f

File diff suppressed because it is too large Load Diff

View File

@ -26,7 +26,7 @@ struct dma_coherent_mem {
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
void *ret, *ret_nocache;
struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
int order = get_order(size);
@ -44,17 +44,24 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
}
ret = (void *)__get_free_pages(gfp, order);
if (!ret)
return NULL;
if (ret != NULL) {
memset(ret, 0, size);
/*
* Pages from the page allocator may have data present in
* cache. So flush the cache before using uncached memory.
*/
dma_cache_sync(NULL, ret, size, DMA_BIDIRECTIONAL);
*dma_handle = virt_to_phys(ret);
memset(ret, 0, size);
/*
* Pages from the page allocator may have data present in
* cache. So flush the cache before using uncached memory.
*/
dma_cache_sync(dev, ret, size, DMA_BIDIRECTIONAL);
ret_nocache = ioremap_nocache(virt_to_phys(ret), size);
if (!ret_nocache) {
free_pages((unsigned long)ret, order);
return NULL;
}
return ret;
*dma_handle = virt_to_phys(ret);
return ret_nocache;
}
EXPORT_SYMBOL(dma_alloc_coherent);
@ -71,7 +78,8 @@ void dma_free_coherent(struct device *dev, size_t size,
} else {
WARN_ON(irqs_disabled()); /* for portability */
BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE);
free_pages((unsigned long)vaddr, order);
free_pages((unsigned long)phys_to_virt(dma_handle), order);
iounmap(vaddr);
}
}
EXPORT_SYMBOL(dma_free_coherent);

View File

@ -15,6 +15,7 @@
#include <linux/mm.h>
#include <linux/hardirq.h>
#include <linux/kprobes.h>
#include <asm/io_trapped.h>
#include <asm/system.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
@ -163,6 +164,8 @@ no_context:
if (fixup_exception(regs))
return;
if (handle_trapped_io(regs, address))
return;
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
@ -296,6 +299,14 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
entry = pte_mkdirty(entry);
entry = pte_mkyoung(entry);
#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SMP)
/*
* ITLB is not affected by "ldtlb" instruction.
* So, we need to flush the entry by ourselves.
*/
local_flush_tlb_one(get_asid(), address & PAGE_MASK);
#endif
set_pte(pte, entry);
update_mmu_cache(NULL, address, entry);

View File

@ -203,6 +203,7 @@ void __init paging_init(void)
free_area_init_nodes(max_zone_pfns);
#ifdef CONFIG_SUPERH32
/* Set up the uncached fixmap */
set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
@ -214,6 +215,7 @@ void __init paging_init(void)
*/
cached_to_uncached = P2SEG - P1SEG;
#endif
#endif
}
static struct kcore_list kcore_mem, kcore_vmalloc;

View File

@ -45,3 +45,5 @@ MAGICPANELR2 SH_MAGIC_PANEL_R2
R2D_PLUS RTS7751R2D_PLUS
R2D_1 RTS7751R2D_1
CAYMAN SH_CAYMAN
SDK7780 SH_SDK7780
MIGOR SH_MIGOR

View File

@ -434,9 +434,9 @@ asmlinkage int solaris_statvfs(u32 path, u32 buf)
error = user_path_walk(A(path),&nd);
if (!error) {
struct inode * inode = nd.dentry->d_inode;
error = report_statvfs(nd.mnt, inode, buf);
path_release(&nd);
struct inode *inode = nd.path.dentry->d_inode;
error = report_statvfs(nd.path.mnt, inode, buf);
path_put(&nd.path);
}
return error;
}
@ -464,9 +464,9 @@ asmlinkage int solaris_statvfs64(u32 path, u32 buf)
lock_kernel();
error = user_path_walk(A(path), &nd);
if (!error) {
struct inode * inode = nd.dentry->d_inode;
error = report_statvfs64(nd.mnt, inode, buf);
path_release(&nd);
struct inode *inode = nd.path.dentry->d_inode;
error = report_statvfs64(nd.path.mnt, inode, buf);
path_put(&nd.path);
}
unlock_kernel();
return error;

View File

@ -145,8 +145,8 @@ void mconsole_proc(struct mc_request *req)
}
up_write(&super->s_umount);
nd.dentry = super->s_root;
nd.mnt = NULL;
nd.path.dentry = super->s_root;
nd.path.mnt = NULL;
nd.flags = O_RDONLY + 1;
nd.last_type = LAST_ROOT;
@ -159,7 +159,7 @@ void mconsole_proc(struct mc_request *req)
goto out_kill;
}
file = dentry_open(nd.dentry, nd.mnt, O_RDONLY);
file = dentry_open(nd.path.dentry, nd.path.mnt, O_RDONLY);
if (IS_ERR(file)) {
mconsole_reply(req, "Failed to open file", 1, 0);
goto out_kill;

View File

@ -21,6 +21,8 @@ config X86
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_KVM
config GENERIC_LOCKBREAK
def_bool n
@ -119,8 +121,6 @@ config ARCH_HAS_CPU_RELAX
config HAVE_SETUP_PER_CPU_AREA
def_bool X86_64
select HAVE_KVM
config ARCH_HIBERNATION_POSSIBLE
def_bool y
depends on !SMP || !X86_VOYAGER

View File

@ -126,6 +126,8 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
printk(KERN_DEBUG "Monitor-Mwait will be used to enter C-%d "
"state\n", cx->type);
}
snprintf(cx->desc, ACPI_CX_DESC_LEN, "ACPI FFH INTEL MWAIT 0x%x",
cx->address);
out:
set_cpus_allowed(current, saved_mask);

View File

@ -391,7 +391,7 @@ static void __init runtime_code_page_mkexec(void)
if (md->type != EFI_RUNTIME_SERVICES_CODE)
continue;
set_memory_x(md->virt_addr, md->num_pages << EFI_PAGE_SHIFT);
set_memory_x(md->virt_addr, md->num_pages);
}
}
@ -434,7 +434,7 @@ void __init efi_enter_virtual_mode(void)
}
if (!(md->attribute & EFI_MEMORY_WB))
set_memory_uc(md->virt_addr, size);
set_memory_uc(md->virt_addr, md->num_pages);
systab = (u64) (unsigned long) efi_phys.systab;
if (md->phys_addr <= systab && systab < end) {

View File

@ -749,6 +749,15 @@ void __init gart_iommu_init(void)
*/
set_memory_np((unsigned long)__va(iommu_bus_base),
iommu_size >> PAGE_SHIFT);
/*
* Tricky. The GART table remaps the physical memory range,
* so the CPU wont notice potential aliases and if the memory
* is remapped to UC later on, we might surprise the PCI devices
* with a stray writeout of a cacheline. So play it sure and
* do an explicit, full-scale wbinvd() _after_ having marked all
* the pages as Not-Present:
*/
wbinvd();
/*
* Try to workaround a bug (thanks to BenH)

Some files were not shown because too many files have changed in this diff Show More