ARM: footbridge: remove CATS

Nobody seems to have a CATS machine any more, so remove
it now, leaving only NetWinder and EBSA285.

Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2022-09-29 15:39:13 +02:00
parent 046cd3c698
commit 50f6f34e60
7 changed files with 1 additions and 182 deletions

View File

@ -344,7 +344,7 @@ __create_page_tables:
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
#endif
#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
#if defined(CONFIG_ARCH_NETWINDER)
/*
* If we're using the NetWinder or CATS, we also need to map
* in the 16550-type serial port for the debug messages

View File

@ -16,18 +16,6 @@ menuconfig ARCH_FOOTBRIDGE
if ARCH_FOOTBRIDGE
config ARCH_CATS
bool "CATS"
depends on UNUSED_BOARD_FILES
select CLKEVT_I8253
select CLKSRC_I8253
select ISA
select FORCE_PCI
help
Say Y here if you intend to run this kernel on the CATS.
Saying N will reduce the size of the Footbridge kernel.
config ARCH_EBSA285_HOST
bool "EBSA285 (host mode)"
select ARCH_EBSA285

View File

@ -8,11 +8,9 @@
obj-y := common.o isa-irq.o isa.o isa-rtc.o dma-isa.o
pci-y += dc21285.o
pci-$(CONFIG_ARCH_CATS) += cats-pci.o
pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o

View File

@ -1,98 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/arm/mach-footbridge/cats-hw.c
*
* CATS machine fixup
*
* Copyright (C) 1998, 1999 Russell King, Phil Blundell
*/
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/screen_info.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include "common.h"
#define CFG_PORT 0x370
#define INDEX_PORT (CFG_PORT)
#define DATA_PORT (CFG_PORT + 1)
static int __init cats_hw_init(void)
{
if (machine_is_cats()) {
/* Set Aladdin to CONFIGURE mode */
outb(0x51, CFG_PORT);
outb(0x23, CFG_PORT);
/* Select logical device 3 */
outb(0x07, INDEX_PORT);
outb(0x03, DATA_PORT);
/* Set parallel port to DMA channel 3, ECP+EPP1.9,
enable EPP timeout */
outb(0x74, INDEX_PORT);
outb(0x03, DATA_PORT);
outb(0xf0, INDEX_PORT);
outb(0x0f, DATA_PORT);
outb(0xf1, INDEX_PORT);
outb(0x07, DATA_PORT);
/* Select logical device 4 */
outb(0x07, INDEX_PORT);
outb(0x04, DATA_PORT);
/* UART1 high speed mode */
outb(0xf0, INDEX_PORT);
outb(0x02, DATA_PORT);
/* Select logical device 5 */
outb(0x07, INDEX_PORT);
outb(0x05, DATA_PORT);
/* UART2 high speed mode */
outb(0xf0, INDEX_PORT);
outb(0x02, DATA_PORT);
/* Set Aladdin to RUN mode */
outb(0xbb, CFG_PORT);
}
return 0;
}
__initcall(cats_hw_init);
/*
* CATS uses soft-reboot by default, since
* hard reboots fail on early boards.
*/
static void __init
fixup_cats(struct tag *tags, char **cmdline)
{
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
screen_info.orig_video_lines = 25;
screen_info.orig_video_points = 16;
screen_info.orig_y = 24;
#endif
}
MACHINE_START(CATS, "Chalice-CATS")
/* Maintainer: Philip Blundell */
.atag_offset = 0x100,
.reboot_mode = REBOOT_SOFT,
.fixup = fixup_cats,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.init_time = isa_timer_init,
.restart = footbridge_restart,
MACHINE_END

View File

@ -1,64 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/arm/mach-footbridge/cats-pci.c
*
* PCI bios-type initialisation for PCI machines
*
* Bits taken from various places.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
/* cats host-specific stuff */
static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
{
return 0;
}
static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->irq >= 255)
return -1; /* not a valid interrupt. */
if (dev->irq >= 128)
return dev->irq & 0x1f;
if (dev->irq >= 1 && dev->irq <= 4)
return irqmap_cats[dev->irq - 1];
if (dev->irq != 0)
printk("PCI: device %02x:%02x has unknown irq line %x\n",
dev->bus->number, dev->devfn, dev->irq);
return -1;
}
/*
* why not the standard PCI swizzle? does this prevent 4-port tulip
* cards being used (ie, pci-pci bridge based cards)?
*/
static struct hw_pci cats_pci __initdata = {
.swizzle = cats_no_swizzle,
.map_irq = cats_map_irq,
.nr_controllers = 1,
.ops = &dc21285_ops,
.setup = dc21285_setup,
.preinit = dc21285_preinit,
.postinit = dc21285_postinit,
};
static int __init cats_pci_init(void)
{
if (machine_is_cats())
pci_common_init(&cats_pci);
return 0;
}
subsys_initcall(cats_pci_init);

View File

@ -206,9 +206,6 @@ void __init footbridge_init_irq(void)
*/
isa_init_irq(IRQ_PCI);
if (machine_is_cats())
isa_init_irq(IRQ_IN2);
if (machine_is_netwinder())
isa_init_irq(IRQ_IN3);
}

View File

@ -206,8 +206,6 @@ static int __init footbridge_watchdog_init(void)
pr_info("Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n",
soft_margin);
if (machine_is_cats())
pr_warn("Warning: Watchdog reset may not work on this machine\n");
return 0;
}