[PATCH] fbdev: prevent drivers that have hardware cursors from calling software cursor code

This patch removes drivers that have hardware cursors from calling the
software cursor code.  Also if the driver sets a no hardware cursor flag
then the driver reports a error it someone attempts to use the cursor.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
James Simmons 2005-09-09 13:04:31 -07:00 committed by Linus Torvalds
parent d2d58384fc
commit 4c7ffe0b9f
7 changed files with 6 additions and 35 deletions

View File

@ -650,7 +650,6 @@ config FB_NVIDIA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
@ -681,7 +680,6 @@ config FB_RIVA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
@ -720,7 +718,6 @@ config FB_I810
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
@ -763,7 +760,6 @@ config FB_INTEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_SOFT_CURSOR
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G chipsets.

View File

@ -201,7 +201,6 @@
#define HAS_ACCELERATION 2
#define ALWAYS_SYNC 4
#define LOCKUP 8
#define USE_HWCUR 16
struct gtt_data {
struct agp_memory *i810_fb_memory;

View File

@ -1375,7 +1375,6 @@ static int i810fb_set_par(struct fb_info *info)
decode_var(&info->var, par);
i810_load_regs(par);
i810_init_cursor(par);
encode_fix(&info->fix, info);
if (info->var.accel_flags && !(par->dev_flags & LOCKUP)) {
@ -1418,9 +1417,8 @@ static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
struct i810fb_par *par = (struct i810fb_par *)info->par;
u8 __iomem *mmio = par->mmio_start_virtual;
if (!(par->dev_flags & USE_HWCUR) || !info->var.accel_flags ||
par->dev_flags & LOCKUP)
return soft_cursor(info, cursor);
if (!par->dev_flags & LOCKUP)
return -ENXIO;
if (cursor->image.width > 64 || cursor->image.height > 64)
return -ENXIO;

View File

@ -234,7 +234,6 @@ struct intelfb_info {
/* palette */
u32 pseudo_palette[17];
struct { u8 red, green, blue, pad; } palette[256];
/* chip info */
int pci_chipset;

View File

@ -117,14 +117,10 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/console.h>
#include <linux/selection.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/kd.h>
#include <linux/vt_kern.h>
#include <linux/pagemap.h>
#include <linux/version.h>
@ -242,7 +238,7 @@ static int voffset = 48;
static char *mode = NULL;
module_param(accel, bool, S_IRUGO);
MODULE_PARM_DESC(accel, "Enable console acceleration");
MODULE_PARM_DESC(accel, "Enable hardware acceleration");
module_param(vram, int, S_IRUGO);
MODULE_PARM_DESC(vram, "System RAM to allocate to framebuffer in MiB");
module_param(voffset, int, S_IRUGO);
@ -498,7 +494,7 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct fb_info *info;
struct intelfb_info *dinfo;
int i, j, err, dvo;
int i, err, dvo;
int aperture_size, stolen_size;
struct agp_kern_info gtt_info;
int agp_memtype;
@ -845,13 +841,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
if (bailearly == 5)
bailout(dinfo);
for (i = 0; i < 16; i++) {
j = color_table[i];
dinfo->palette[i].red = default_red[j];
dinfo->palette[i].green = default_grn[j];
dinfo->palette[i].blue = default_blu[j];
}
if (bailearly == 6)
bailout(dinfo);
@ -1363,10 +1352,6 @@ intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
green >>= 8;
blue >>= 8;
dinfo->palette[regno].red = red;
dinfo->palette[regno].green = green;
dinfo->palette[regno].blue = blue;
intelfbhw_setcolreg(dinfo, regno, red, green, blue,
transp);
}
@ -1499,7 +1484,7 @@ intelfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
#endif
if (!dinfo->hwcursor)
return soft_cursor(info, cursor);
return -ENXIO;
intelfbhw_cursor_hide(dinfo);

View File

@ -29,14 +29,10 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/console.h>
#include <linux/selection.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/kd.h>
#include <linux/vt_kern.h>
#include <linux/pagemap.h>
#include <linux/version.h>

View File

@ -893,7 +893,7 @@ static int nvidiafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
int i, set = cursor->set;
u16 fg, bg;
if (cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS)
if (!hwcur || cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS)
return -ENXIO;
NVShowHideCursor(par, 0);
@ -1356,8 +1356,6 @@ static int __devinit nvidia_set_fbinfo(struct fb_info *info)
info->pixmap.size = 8 * 1024;
info->pixmap.flags = FB_PIXMAP_SYSTEM;
if (!hwcur)
info->fbops->fb_cursor = soft_cursor;
info->var.accel_flags = (!noaccel);
switch (par->Architecture) {