usb: cdns3: gadget: toggle cycle bit before reset endpoint

If there are TRBs pending during reset endpoint operation, the
DMA will advance after reset operation, but it isn't expected,
since the data is not yet available (For OUT, the data is not
yet available). After the data is ready, there won't be any
interrupt since the EP_TRADDR already points to next TRB entry
and doorbell is not set.

To fix it, it toggles cycle bit before reset operation, and restores
it after reset, it could avoid unexpected DMA advance due to
cycle bit is for software during the endpoint reset operation.

Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200219141455.23257-3-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Peter Chen 2020-02-19 22:14:55 +08:00 committed by Greg Kroah-Hartman
parent 8a7c47fb72
commit 4bf2dd6513

View File

@ -2595,11 +2595,21 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
{
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
struct usb_request *request;
struct cdns3_request *priv_req;
struct cdns3_trb *trb = NULL;
int ret;
int val;
trace_cdns3_halt(priv_ep, 0, 0);
request = cdns3_next_request(&priv_ep->pending_req_list);
if (request) {
priv_req = to_cdns3_request(request);
trb = priv_req->trb;
if (trb)
trb->control = trb->control ^ TRB_CYCLE;
}
writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
/* wait for EPRST cleared */
@ -2610,10 +2620,11 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
priv_ep->flags &= ~(EP_STALLED | EP_STALL_PENDING);
request = cdns3_next_request(&priv_ep->pending_req_list);
if (request)
if (request) {
if (trb)
trb->control = trb->control ^ TRB_CYCLE;
cdns3_rearm_transfer(priv_ep, 1);
}
cdns3_start_all_request(priv_dev, priv_ep);
return ret;