regulators: max8660: use i2c_id->driver_data rather than ->name

Introduce an enum and denote the device type via struct i2c_id's
driver_data field rather than comparing strings.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Daniel Mack 2013-08-02 10:19:15 +02:00 committed by Mark Brown
parent dff91d0b72
commit 4a678f0374

View File

@ -305,6 +305,11 @@ static const struct regulator_desc max8660_reg[] = {
},
};
enum {
MAX8660 = 0,
MAX8661 = 1,
};
static int max8660_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
@ -313,6 +318,7 @@ static int max8660_probe(struct i2c_client *client,
struct regulator_config config = { };
struct max8660 *max8660;
int boot_on, i, id, ret = -EINVAL;
unsigned int type;
if (pdata->num_subdevs > MAX8660_V_END) {
dev_err(&client->dev, "Too many regulators found!\n");
@ -327,6 +333,7 @@ static int max8660_probe(struct i2c_client *client,
max8660->client = client;
rdev = max8660->rdev;
type = i2c_id->driver_data;
if (pdata->en34_is_high) {
/* Simulate always on */
@ -376,7 +383,7 @@ static int max8660_probe(struct i2c_client *client,
break;
case MAX8660_V7:
if (!strcmp(i2c_id->name, "max8661")) {
if (type == MAX8661) {
dev_err(&client->dev, "Regulator not on this chip!\n");
goto err_out;
}
@ -431,8 +438,8 @@ static int max8660_remove(struct i2c_client *client)
}
static const struct i2c_device_id max8660_id[] = {
{ "max8660", 0 },
{ "max8661", 0 },
{ .name = "max8660", .driver_data = MAX8660 },
{ .name = "max8661", .driver_data = MAX8661 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max8660_id);