From 4946b3af5e8e96f0f0ceec53701541f1faae714d Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 15 Sep 2017 16:35:24 -0700 Subject: [PATCH] mmc: sdhci-msm: Enable delay circuit calibration clocks The delay circuit used to support HS400 is calibrated based on two additional clocks. When these clocks are not available and FF_CLK_SW_RST_DIS is not set in CORE_HC_MODE, reset might fail. But on some platforms this doesn't work properly and below dump can be seen in the kernel log. mmc0: Reset 0x1 never completed. mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001102 mmc0: sdhci: Blk size: 0x00004000 | Blk cnt: 0x00000000 mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 mmc0: sdhci: Present: 0x01f80000 | Host ctl: 0x00000000 mmc0: sdhci: Power: 0x00000000 | Blk gap: 0x00000000 mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000002 mmc0: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 mmc0: sdhci: Int enab: 0x00000000 | Sig enab: 0x00000000 mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 mmc0: sdhci: Caps: 0x742dc8b2 | Caps_1: 0x00008007 mmc0: sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 mmc0: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 mmc0: sdhci: Host ctl2: 0x00000000 mmc0: sdhci: ============================================ Add support for the additional calibration clocks to allow these platforms to be configured appropriately. Cc: Venkat Gopalakrishnan Cc: Ritesh Harjani Signed-off-by: Bjorn Andersson Acked-by: Rob Herring Tested-by: Jeremy McNicoll Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 2 ++ drivers/mmc/host/sdhci-msm.c | 12 +++++++++++- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index 0576264eab5e..bfdcdc4ccdff 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -18,6 +18,8 @@ Required properties: "core" - SDC MMC clock (MCLK) (required) "bus" - SDCC bus voter clock (optional) "xo" - TCXO clock (optional) + "cal" - reference clock for RCLK delay calibration (optional) + "sleep" - sleep clock for RCLK delay calibration (optional) Example: diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 526e19eced2f..33919d2b35d1 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -129,7 +129,7 @@ struct sdhci_msm_host { int pwr_irq; /* power irq */ struct clk *bus_clk; /* SDHC bus voter clock */ struct clk *xo_clk; /* TCXO clk needed for FLL feature of cm_dll*/ - struct clk_bulk_data bulk_clks[2]; /* core, iface clocks */ + struct clk_bulk_data bulk_clks[4]; /* core, iface, cal, sleep clocks */ unsigned long clk_rate; struct mmc_host *mmc; bool use_14lpp_dll_reset; @@ -1184,6 +1184,16 @@ static int sdhci_msm_probe(struct platform_device *pdev) if (ret) dev_warn(&pdev->dev, "core clock boost failed\n"); + clk = devm_clk_get(&pdev->dev, "cal"); + if (IS_ERR(clk)) + clk = NULL; + msm_host->bulk_clks[2].clk = clk; + + clk = devm_clk_get(&pdev->dev, "sleep"); + if (IS_ERR(clk)) + clk = NULL; + msm_host->bulk_clks[3].clk = clk; + ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks), msm_host->bulk_clks); if (ret)