V4L/DVB (7046): Finalise support for the Pinnacle HD 8000i

Correctly set the atatch structures, enable IR, configure the
xc5000 tuner includes.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Steven Toth 2008-01-15 21:57:14 -03:00 committed by Mauro Carvalho Chehab
parent 73c993a829
commit 4917019d19
4 changed files with 10 additions and 6 deletions

View File

@ -22,7 +22,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/videodev.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
#include <linux/dvb/frontend.h>
#include <linux/i2c.h>

View File

@ -380,6 +380,7 @@ static struct s5h1409_config pinnacle_pctv_hd_800i_config = {
.qam_if = 44000,
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING,
.mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
};
static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = {
@ -643,9 +644,6 @@ static int dvb_register(struct cx8802_dev *dev)
}
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
/* Parallel mpeg data port and punctured clock mode */
dev->ts_gen_cntrl = 0x04;
dev->dvb.frontend = dvb_attach(s5h1409_attach,
&pinnacle_pctv_hd_800i_config,
&dev->core->i2c_adap);

View File

@ -224,6 +224,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
ir_codes = ir_codes_hauppauge_new;
ir_type = IR_TYPE_RC5;
ir->sampling = 1;
@ -443,6 +444,7 @@ void cx88_ir_irq(struct cx88_core *core)
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
ir_dprintk("biphase decoded: %x\n", ircode);
if ((ircode & 0xfffff000) != 0x3000)

View File

@ -118,8 +118,12 @@ static int cx8802_start_dma(struct cx8802_dev *dev,
case CX88_BOARD_HAUPPAUGE_HVR1300:
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
/* Enable MPEG parallel port */
cx_write(MO_PINMUX_IO, 0x80);
/* Enable MPEG parallel IO and video signal pins */
cx_write(MO_PINMUX_IO, 0x88);
cx_write(TS_HW_SOP_CNTRL, (0x47 << 16) | (188 << 4));
dev->ts_gen_cntrl = 5;
cx_write(TS_SOP_STAT, 0);
cx_write(TS_VALERR_CNTRL, 0);
udelay(100);
break;
default: