mtd: nand: mxic-ecc: Add Macronix external ECC engine support

Some SPI-NAND chips do not support on-die ECC. For these chips,
correction must apply on the SPI controller end. In order to avoid
doing all the calculations by software, Macronix provides a specific
engine that can offload the intensive work.

Add Macronix ECC engine support, this engine can work in conjunction
with a SPI controller and a raw NAND controller, it can be pipelined
or external and supports linear and syndrome layouts.

Right now the simplest configuration is supported: SPI controller
external and linear ECC engine.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-15-miquel.raynal@bootlin.com
This commit is contained in:
Miquel Raynal 2021-12-16 12:16:40 +01:00
parent cda32a618d
commit 48e6633a9f
3 changed files with 702 additions and 0 deletions

View File

@ -46,6 +46,12 @@ config MTD_NAND_ECC_SW_BCH
ECC codes. They are used with NAND devices requiring more than 1 bit ECC codes. They are used with NAND devices requiring more than 1 bit
of error correction. of error correction.
config MTD_NAND_ECC_MXIC
bool "Macronix external hardware ECC engine"
select MTD_NAND_ECC
help
This enables support for the hardware ECC engine from Macronix.
endmenu endmenu
endmenu endmenu

View File

@ -10,3 +10,4 @@ obj-y += spi/
nandcore-$(CONFIG_MTD_NAND_ECC) += ecc.o nandcore-$(CONFIG_MTD_NAND_ECC) += ecc.o
nandcore-$(CONFIG_MTD_NAND_ECC_SW_HAMMING) += ecc-sw-hamming.o nandcore-$(CONFIG_MTD_NAND_ECC_SW_HAMMING) += ecc-sw-hamming.o
nandcore-$(CONFIG_MTD_NAND_ECC_SW_BCH) += ecc-sw-bch.o nandcore-$(CONFIG_MTD_NAND_ECC_SW_BCH) += ecc-sw-bch.o
nandcore-$(CONFIG_MTD_NAND_ECC_MXIC) += ecc-mxic.o

695
drivers/mtd/nand/ecc-mxic.c Normal file
View File

@ -0,0 +1,695 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Support for Macronix external hardware ECC engine for NAND devices, also
* called DPE for Data Processing Engine.
*
* Copyright © 2019 Macronix
* Author: Miquel Raynal <miquel.raynal@bootlin.com>
*/
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
/* DPE Configuration */
#define DP_CONFIG 0x00
#define ECC_EN BIT(0)
#define ECC_TYP(idx) (((idx) << 3) & GENMASK(6, 3))
/* DPE Interrupt Status */
#define INTRPT_STS 0x04
#define TRANS_CMPLT BIT(0)
#define SDMA_MAIN BIT(1)
#define SDMA_SPARE BIT(2)
#define ECC_ERR BIT(3)
#define TO_SPARE BIT(4)
#define TO_MAIN BIT(5)
/* DPE Interrupt Status Enable */
#define INTRPT_STS_EN 0x08
/* DPE Interrupt Signal Enable */
#define INTRPT_SIG_EN 0x0C
/* Host Controller Configuration */
#define HC_CONFIG 0x10
#define MEM2MEM BIT(4) /* TRANS_TYP_IO in the spec */
#define ECC_PACKED 0 /* LAYOUT_TYP_INTEGRATED in the spec */
#define ECC_INTERLEAVED BIT(2) /* LAYOUT_TYP_DISTRIBUTED in the spec */
#define BURST_TYP_FIXED 0
#define BURST_TYP_INCREASING BIT(0)
/* Host Controller Slave Address */
#define HC_SLV_ADDR 0x14
/* ECC Chunk Size */
#define CHUNK_SIZE 0x20
/* Main Data Size */
#define MAIN_SIZE 0x24
/* Spare Data Size */
#define SPARE_SIZE 0x28
#define META_SZ(reg) ((reg) & GENMASK(7, 0))
#define PARITY_SZ(reg) (((reg) & GENMASK(15, 8)) >> 8)
#define RSV_SZ(reg) (((reg) & GENMASK(23, 16)) >> 16)
#define SPARE_SZ(reg) ((reg) >> 24)
/* ECC Chunk Count */
#define CHUNK_CNT 0x30
/* SDMA Control */
#define SDMA_CTRL 0x40
#define WRITE_NAND 0
#define READ_NAND BIT(1)
#define CONT_NAND BIT(29)
#define CONT_SYSM BIT(30) /* Continue System Memory? */
#define SDMA_STRT BIT(31)
/* SDMA Address of Main Data */
#define SDMA_MAIN_ADDR 0x44
/* SDMA Address of Spare Data */
#define SDMA_SPARE_ADDR 0x48
/* DPE Version Number */
#define DP_VER 0xD0
#define DP_VER_OFFSET 16
/* Status bytes between each chunk of spare data */
#define STAT_BYTES 4
#define NO_ERR 0x00
#define MAX_CORR_ERR 0x28
#define UNCORR_ERR 0xFE
#define ERASED_CHUNK 0xFF
struct mxic_ecc_engine {
struct device *dev;
void __iomem *regs;
int irq;
struct completion complete;
struct nand_ecc_engine external_engine;
struct mutex lock;
};
struct mxic_ecc_ctx {
/* ECC machinery */
unsigned int data_step_sz;
unsigned int oob_step_sz;
unsigned int parity_sz;
unsigned int meta_sz;
u8 *status;
int steps;
/* DMA boilerplate */
struct nand_ecc_req_tweak_ctx req_ctx;
u8 *oobwithstat;
struct scatterlist sg[2];
struct nand_page_io_req *req;
};
static struct mxic_ecc_engine *ext_ecc_eng_to_mxic(struct nand_ecc_engine *eng)
{
return container_of(eng, struct mxic_ecc_engine, external_engine);
}
static struct mxic_ecc_engine *nand_to_mxic(struct nand_device *nand)
{
struct nand_ecc_engine *eng = nand->ecc.engine;
return ext_ecc_eng_to_mxic(eng);
}
static int mxic_ecc_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_device *nand = mtd_to_nanddev(mtd);
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
if (section < 0 || section >= ctx->steps)
return -ERANGE;
oobregion->offset = (section * ctx->oob_step_sz) + ctx->meta_sz;
oobregion->length = ctx->parity_sz;
return 0;
}
static int mxic_ecc_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_device *nand = mtd_to_nanddev(mtd);
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
if (section < 0 || section >= ctx->steps)
return -ERANGE;
if (!section) {
oobregion->offset = 2;
oobregion->length = ctx->meta_sz - 2;
} else {
oobregion->offset = section * ctx->oob_step_sz;
oobregion->length = ctx->meta_sz;
}
return 0;
}
static const struct mtd_ooblayout_ops mxic_ecc_ooblayout_ops = {
.ecc = mxic_ecc_ooblayout_ecc,
.free = mxic_ecc_ooblayout_free,
};
static void mxic_ecc_disable_engine(struct mxic_ecc_engine *mxic)
{
u32 reg;
reg = readl(mxic->regs + DP_CONFIG);
reg &= ~ECC_EN;
writel(reg, mxic->regs + DP_CONFIG);
}
static void mxic_ecc_enable_engine(struct mxic_ecc_engine *mxic)
{
u32 reg;
reg = readl(mxic->regs + DP_CONFIG);
reg |= ECC_EN;
writel(reg, mxic->regs + DP_CONFIG);
}
static void mxic_ecc_disable_int(struct mxic_ecc_engine *mxic)
{
writel(0, mxic->regs + INTRPT_SIG_EN);
}
static void mxic_ecc_enable_int(struct mxic_ecc_engine *mxic)
{
writel(TRANS_CMPLT, mxic->regs + INTRPT_SIG_EN);
}
static irqreturn_t mxic_ecc_isr(int irq, void *dev_id)
{
struct mxic_ecc_engine *mxic = dev_id;
u32 sts;
sts = readl(mxic->regs + INTRPT_STS);
if (!sts)
return IRQ_NONE;
if (sts & TRANS_CMPLT)
complete(&mxic->complete);
writel(sts, mxic->regs + INTRPT_STS);
return IRQ_HANDLED;
}
static int mxic_ecc_init_ctx(struct nand_device *nand, struct device *dev)
{
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
struct nand_ecc_props *conf = &nand->ecc.ctx.conf;
struct nand_ecc_props *reqs = &nand->ecc.requirements;
struct nand_ecc_props *user = &nand->ecc.user_conf;
struct mtd_info *mtd = nanddev_to_mtd(nand);
int step_size = 0, strength = 0, desired_correction = 0, steps, idx;
int possible_strength[] = {4, 8, 40, 48};
int spare_size[] = {32, 32, 96, 96};
struct mxic_ecc_ctx *ctx;
u32 spare_reg;
int ret;
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
nand->ecc.ctx.priv = ctx;
/* Only large page NAND chips may use BCH */
if (mtd->oobsize < 64) {
pr_err("BCH cannot be used with small page NAND chips\n");
return -EINVAL;
}
mtd_set_ooblayout(mtd, &mxic_ecc_ooblayout_ops);
/* Enable all status bits */
writel(TRANS_CMPLT | SDMA_MAIN | SDMA_SPARE | ECC_ERR |
TO_SPARE | TO_MAIN, mxic->regs + INTRPT_STS_EN);
/* Configure the correction depending on the NAND device topology */
if (user->step_size && user->strength) {
step_size = user->step_size;
strength = user->strength;
} else if (reqs->step_size && reqs->strength) {
step_size = reqs->step_size;
strength = reqs->strength;
}
if (step_size && strength) {
steps = mtd->writesize / step_size;
desired_correction = steps * strength;
}
/* Step size is fixed to 1kiB, strength may vary (4 possible values) */
conf->step_size = SZ_1K;
steps = mtd->writesize / conf->step_size;
ctx->status = devm_kzalloc(dev, steps * sizeof(u8), GFP_KERNEL);
if (!ctx->status)
return -ENOMEM;
if (desired_correction) {
strength = desired_correction / steps;
for (idx = 0; idx < ARRAY_SIZE(possible_strength); idx++)
if (possible_strength[idx] >= strength)
break;
idx = min_t(unsigned int, idx,
ARRAY_SIZE(possible_strength) - 1);
} else {
/* Missing data, maximize the correction */
idx = ARRAY_SIZE(possible_strength) - 1;
}
/* Tune the selected strength until it fits in the OOB area */
for (; idx >= 0; idx--) {
if (spare_size[idx] * steps <= mtd->oobsize)
break;
}
/* This engine cannot be used with this NAND device */
if (idx < 0)
return -EINVAL;
/* Configure the engine for the desired strength */
writel(ECC_TYP(idx), mxic->regs + DP_CONFIG);
conf->strength = possible_strength[idx];
spare_reg = readl(mxic->regs + SPARE_SIZE);
ctx->steps = steps;
ctx->data_step_sz = mtd->writesize / steps;
ctx->oob_step_sz = mtd->oobsize / steps;
ctx->parity_sz = PARITY_SZ(spare_reg);
ctx->meta_sz = META_SZ(spare_reg);
/* Ensure buffers will contain enough bytes to store the STAT_BYTES */
ctx->req_ctx.oob_buffer_size = nanddev_per_page_oobsize(nand) +
(ctx->steps * STAT_BYTES);
ret = nand_ecc_init_req_tweaking(&ctx->req_ctx, nand);
if (ret)
return ret;
ctx->oobwithstat = kmalloc(mtd->oobsize + (ctx->steps * STAT_BYTES),
GFP_KERNEL);
if (!ctx->oobwithstat) {
ret = -ENOMEM;
goto cleanup_req_tweak;
}
sg_init_table(ctx->sg, 2);
/* Configuration dump and sanity checks */
dev_err(dev, "DPE version number: %d\n",
readl(mxic->regs + DP_VER) >> DP_VER_OFFSET);
dev_err(dev, "Chunk size: %d\n", readl(mxic->regs + CHUNK_SIZE));
dev_err(dev, "Main size: %d\n", readl(mxic->regs + MAIN_SIZE));
dev_err(dev, "Spare size: %d\n", SPARE_SZ(spare_reg));
dev_err(dev, "Rsv size: %ld\n", RSV_SZ(spare_reg));
dev_err(dev, "Parity size: %d\n", ctx->parity_sz);
dev_err(dev, "Meta size: %d\n", ctx->meta_sz);
if ((ctx->meta_sz + ctx->parity_sz + RSV_SZ(spare_reg)) !=
SPARE_SZ(spare_reg)) {
dev_err(dev, "Wrong OOB configuration: %d + %d + %ld != %d\n",
ctx->meta_sz, ctx->parity_sz, RSV_SZ(spare_reg),
SPARE_SZ(spare_reg));
ret = -EINVAL;
goto free_oobwithstat;
}
if (ctx->oob_step_sz != SPARE_SZ(spare_reg)) {
dev_err(dev, "Wrong OOB configuration: %d != %d\n",
ctx->oob_step_sz, SPARE_SZ(spare_reg));
ret = -EINVAL;
goto free_oobwithstat;
}
return 0;
free_oobwithstat:
kfree(ctx->oobwithstat);
cleanup_req_tweak:
nand_ecc_cleanup_req_tweaking(&ctx->req_ctx);
return ret;
}
static int mxic_ecc_init_ctx_external(struct nand_device *nand)
{
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
struct device *dev = nand->ecc.engine->dev;
int ret;
dev_info(dev, "Macronix ECC engine in external mode\n");
ret = mxic_ecc_init_ctx(nand, dev);
if (ret)
return ret;
/* Trigger each step manually */
writel(1, mxic->regs + CHUNK_CNT);
writel(BURST_TYP_INCREASING | ECC_PACKED | MEM2MEM,
mxic->regs + HC_CONFIG);
return 0;
}
static void mxic_ecc_cleanup_ctx(struct nand_device *nand)
{
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
if (ctx) {
nand_ecc_cleanup_req_tweaking(&ctx->req_ctx);
kfree(ctx->oobwithstat);
}
}
static int mxic_ecc_data_xfer_wait_for_completion(struct mxic_ecc_engine *mxic)
{
u32 val;
int ret;
if (mxic->irq) {
reinit_completion(&mxic->complete);
mxic_ecc_enable_int(mxic);
ret = wait_for_completion_timeout(&mxic->complete,
msecs_to_jiffies(1000));
mxic_ecc_disable_int(mxic);
} else {
ret = readl_poll_timeout(mxic->regs + INTRPT_STS, val,
val & TRANS_CMPLT, 10, USEC_PER_SEC);
writel(val, mxic->regs + INTRPT_STS);
}
if (ret) {
dev_err(mxic->dev, "Timeout on data xfer completion\n");
return -ETIMEDOUT;
}
return 0;
}
static int mxic_ecc_process_data(struct mxic_ecc_engine *mxic,
unsigned int direction)
{
unsigned int dir = (direction == NAND_PAGE_READ) ?
READ_NAND : WRITE_NAND;
int ret;
mxic_ecc_enable_engine(mxic);
/* Trigger processing */
writel(SDMA_STRT | dir, mxic->regs + SDMA_CTRL);
/* Wait for completion */
ret = mxic_ecc_data_xfer_wait_for_completion(mxic);
mxic_ecc_disable_engine(mxic);
return ret;
}
static void mxic_ecc_extract_status_bytes(struct mxic_ecc_ctx *ctx)
{
u8 *buf = ctx->oobwithstat;
int next_stat_pos;
int step;
/* Extract the ECC status */
for (step = 0; step < ctx->steps; step++) {
next_stat_pos = ctx->oob_step_sz +
((STAT_BYTES + ctx->oob_step_sz) * step);
ctx->status[step] = buf[next_stat_pos];
}
}
static void mxic_ecc_reconstruct_oobbuf(struct mxic_ecc_ctx *ctx,
u8 *dst, const u8 *src)
{
int step;
/* Reconstruct the OOB buffer linearly (without the ECC status bytes) */
for (step = 0; step < ctx->steps; step++)
memcpy(dst + (step * ctx->oob_step_sz),
src + (step * (ctx->oob_step_sz + STAT_BYTES)),
ctx->oob_step_sz);
}
static void mxic_ecc_add_room_in_oobbuf(struct mxic_ecc_ctx *ctx,
u8 *dst, const u8 *src)
{
int step;
/* Add some space in the OOB buffer for the status bytes */
for (step = 0; step < ctx->steps; step++)
memcpy(dst + (step * (ctx->oob_step_sz + STAT_BYTES)),
src + (step * ctx->oob_step_sz),
ctx->oob_step_sz);
}
static int mxic_ecc_count_biterrs(struct mxic_ecc_engine *mxic,
struct nand_device *nand)
{
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
struct mtd_info *mtd = nanddev_to_mtd(nand);
struct device *dev = mxic->dev;
unsigned int max_bf = 0;
bool failure = false;
int step;
for (step = 0; step < ctx->steps; step++) {
u8 stat = ctx->status[step];
if (stat == NO_ERR) {
dev_dbg(dev, "ECC step %d: no error\n", step);
} else if (stat == ERASED_CHUNK) {
dev_dbg(dev, "ECC step %d: erased\n", step);
} else if (stat == UNCORR_ERR || stat > MAX_CORR_ERR) {
dev_dbg(dev, "ECC step %d: uncorrectable\n", step);
mtd->ecc_stats.failed++;
failure = true;
} else {
dev_dbg(dev, "ECC step %d: %d bits corrected\n",
step, stat);
max_bf = max_t(unsigned int, max_bf, stat);
mtd->ecc_stats.corrected += stat;
}
}
return failure ? -EBADMSG : max_bf;
}
/* External ECC engine helpers */
static int mxic_ecc_prepare_io_req_external(struct nand_device *nand,
struct nand_page_io_req *req)
{
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
struct mtd_info *mtd = nanddev_to_mtd(nand);
int offset, nents, step, ret;
if (req->mode == MTD_OPS_RAW)
return 0;
nand_ecc_tweak_req(&ctx->req_ctx, req);
ctx->req = req;
if (req->type == NAND_PAGE_READ)
return 0;
mxic_ecc_add_room_in_oobbuf(ctx, ctx->oobwithstat,
ctx->req->oobbuf.out);
sg_set_buf(&ctx->sg[0], req->databuf.out, req->datalen);
sg_set_buf(&ctx->sg[1], ctx->oobwithstat,
req->ooblen + (ctx->steps * STAT_BYTES));
nents = dma_map_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
if (!nents)
return -EINVAL;
mutex_lock(&mxic->lock);
for (step = 0; step < ctx->steps; step++) {
writel(sg_dma_address(&ctx->sg[0]) + (step * ctx->data_step_sz),
mxic->regs + SDMA_MAIN_ADDR);
writel(sg_dma_address(&ctx->sg[1]) + (step * (ctx->oob_step_sz + STAT_BYTES)),
mxic->regs + SDMA_SPARE_ADDR);
ret = mxic_ecc_process_data(mxic, ctx->req->type);
if (ret)
break;
}
mutex_unlock(&mxic->lock);
dma_unmap_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
if (ret)
return ret;
/* Retrieve the calculated ECC bytes */
for (step = 0; step < ctx->steps; step++) {
offset = ctx->meta_sz + (step * ctx->oob_step_sz);
mtd_ooblayout_get_eccbytes(mtd,
(u8 *)ctx->req->oobbuf.out + offset,
ctx->oobwithstat + (step * STAT_BYTES),
step * ctx->parity_sz,
ctx->parity_sz);
}
return 0;
}
static int mxic_ecc_finish_io_req_external(struct nand_device *nand,
struct nand_page_io_req *req)
{
struct mxic_ecc_engine *mxic = nand_to_mxic(nand);
struct mxic_ecc_ctx *ctx = nand_to_ecc_ctx(nand);
int nents, step, ret;
if (req->mode == MTD_OPS_RAW)
return 0;
if (req->type == NAND_PAGE_WRITE) {
nand_ecc_restore_req(&ctx->req_ctx, req);
return 0;
}
/* Copy the OOB buffer and add room for the ECC engine status bytes */
mxic_ecc_add_room_in_oobbuf(ctx, ctx->oobwithstat, ctx->req->oobbuf.in);
sg_set_buf(&ctx->sg[0], req->databuf.in, req->datalen);
sg_set_buf(&ctx->sg[1], ctx->oobwithstat,
req->ooblen + (ctx->steps * STAT_BYTES));
nents = dma_map_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
if (!nents)
return -EINVAL;
mutex_lock(&mxic->lock);
for (step = 0; step < ctx->steps; step++) {
writel(sg_dma_address(&ctx->sg[0]) + (step * ctx->data_step_sz),
mxic->regs + SDMA_MAIN_ADDR);
writel(sg_dma_address(&ctx->sg[1]) + (step * (ctx->oob_step_sz + STAT_BYTES)),
mxic->regs + SDMA_SPARE_ADDR);
ret = mxic_ecc_process_data(mxic, ctx->req->type);
if (ret)
break;
}
mutex_unlock(&mxic->lock);
dma_unmap_sg(mxic->dev, ctx->sg, 2, DMA_BIDIRECTIONAL);
/* Extract the status bytes and reconstruct the buffer */
mxic_ecc_extract_status_bytes(ctx);
mxic_ecc_reconstruct_oobbuf(ctx, ctx->req->oobbuf.in, ctx->oobwithstat);
nand_ecc_restore_req(&ctx->req_ctx, req);
return mxic_ecc_count_biterrs(mxic, nand);
}
static struct nand_ecc_engine_ops mxic_ecc_engine_external_ops = {
.init_ctx = mxic_ecc_init_ctx_external,
.cleanup_ctx = mxic_ecc_cleanup_ctx,
.prepare_io_req = mxic_ecc_prepare_io_req_external,
.finish_io_req = mxic_ecc_finish_io_req_external,
};
static int mxic_ecc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mxic_ecc_engine *mxic;
int ret;
mxic = devm_kzalloc(&pdev->dev, sizeof(*mxic), GFP_KERNEL);
if (!mxic)
return -ENOMEM;
mxic->dev = &pdev->dev;
/*
* Both memory regions for the ECC engine itself and the AXI slave
* address are mandatory.
*/
mxic->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mxic->regs)) {
dev_err(&pdev->dev, "Missing memory region\n");
return PTR_ERR(mxic->regs);
}
mxic_ecc_disable_engine(mxic);
mxic_ecc_disable_int(mxic);
/* IRQ is optional yet much more efficient */
mxic->irq = platform_get_irq_byname_optional(pdev, "ecc-engine");
if (mxic->irq > 0) {
ret = devm_request_irq(&pdev->dev, mxic->irq, mxic_ecc_isr, 0,
"mxic-ecc", mxic);
if (ret)
return ret;
} else {
dev_info(dev, "Invalid or missing IRQ, fallback to polling\n");
mxic->irq = 0;
}
mutex_init(&mxic->lock);
/*
* In external mode, the device is the ECC engine. In pipelined mode,
* the device is the host controller. The device is used to match the
* right ECC engine based on the DT properties.
*/
mxic->external_engine.dev = &pdev->dev;
mxic->external_engine.integration = NAND_ECC_ENGINE_INTEGRATION_EXTERNAL;
mxic->external_engine.ops = &mxic_ecc_engine_external_ops;
nand_ecc_register_on_host_hw_engine(&mxic->external_engine);
platform_set_drvdata(pdev, mxic);
return 0;
}
static int mxic_ecc_remove(struct platform_device *pdev)
{
struct mxic_ecc_engine *mxic = platform_get_drvdata(pdev);
nand_ecc_unregister_on_host_hw_engine(&mxic->external_engine);
return 0;
}
static const struct of_device_id mxic_ecc_of_ids[] = {
{
.compatible = "mxicy,nand-ecc-engine-rev3",
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, mxic_ecc_of_ids);
static struct platform_driver mxic_ecc_driver = {
.driver = {
.name = "mxic-nand-ecc-engine",
.of_match_table = mxic_ecc_of_ids,
},
.probe = mxic_ecc_probe,
.remove = mxic_ecc_remove,
};
module_platform_driver(mxic_ecc_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
MODULE_DESCRIPTION("Macronix NAND hardware ECC controller");