mirror of
https://github.com/torvalds/linux.git
synced 2024-11-19 18:41:48 +00:00
dt-bindings: Remove leading zeros from bindings notation
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
This commit is contained in:
Marco Franchi
Rob Herring
parent
efb5b43a54
commit
48c926cd34
@ -62,7 +62,7 @@ pmu_system_controller: system-controller@10040000 {
|
||||
|
||||
Example of clock consumer :
|
||||
|
||||
usb3503: usb3503@08 {
|
||||
usb3503: usb3503@8 {
|
||||
/* ... */
|
||||
clock-names = "refclk";
|
||||
clocks = <&pmu_system_controller 0>;
|
||||
|
||||
@ -71,7 +71,7 @@ Optional nodes:
|
||||
- compatible: only "samsung,secure-firmware" is currently supported
|
||||
- reg: address of non-secure SYSRAM used for communication with firmware
|
||||
|
||||
firmware@0203F000 {
|
||||
firmware@203F000 {
|
||||
compatible = "samsung,secure-firmware";
|
||||
reg = <0x0203F000 0x1000>;
|
||||
};
|
||||
|
||||
@ -33,7 +33,7 @@ Required properties:
|
||||
property with the highest frequency
|
||||
|
||||
Example:
|
||||
v2m_sysctl: sysctl@020000 {
|
||||
v2m_sysctl: sysctl@20000 {
|
||||
compatible = "arm,sp810", "arm,primecell";
|
||||
reg = <0x020000 0x1000>;
|
||||
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
|
||||
|
||||
@ -37,7 +37,7 @@ Example:
|
||||
compatible = "arm,vexpress-sysreg";
|
||||
reg = <0x10000000 0x1000>;
|
||||
|
||||
v2m_led_gpios: sys_led@08 {
|
||||
v2m_led_gpios: sys_led@8 {
|
||||
compatible = "arm,vexpress-sysreg,sys_led";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
@ -56,7 +56,7 @@ Examples:
|
||||
interrupts = <115>;
|
||||
};
|
||||
|
||||
ahci: sata@01c18000 {
|
||||
ahci: sata@1c18000 {
|
||||
compatible = "allwinner,sun4i-a10-ahci";
|
||||
reg = <0x01c18000 0x1000>;
|
||||
interrupts = <56>;
|
||||
|
||||
@ -25,7 +25,7 @@ Optional properties:
|
||||
|
||||
Examples:
|
||||
|
||||
sata@02200000 {
|
||||
sata@2200000 {
|
||||
compatible = "fsl,imx6q-ahci";
|
||||
reg = <0x02200000 0x4000>;
|
||||
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@ -61,7 +61,7 @@ Timing property for child nodes. It is mandatory, not optional.
|
||||
|
||||
Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
|
||||
|
||||
weim: weim@021b8000 {
|
||||
weim: weim@21b8000 {
|
||||
compatible = "fsl,imx6q-weim";
|
||||
reg = <0x021b8000 0x4000>;
|
||||
clocks = <&clks 196>;
|
||||
|
||||
@ -28,7 +28,7 @@ which can normally be found in the datasheet.
|
||||
|
||||
Example:
|
||||
|
||||
rsb@01f03400 {
|
||||
rsb@1f03400 {
|
||||
compatible = "allwinner,sun8i-a23-rsb";
|
||||
reg = <0x01f03400 0x400>;
|
||||
interrupts = <0 39 4>;
|
||||
|
||||
@ -59,7 +59,7 @@ syscon: syscon@10000000 {
|
||||
compatible = "syscon";
|
||||
reg = <0x10000000 0x1000>;
|
||||
|
||||
oscclk0: osc0@0c {
|
||||
oscclk0: osc0@c {
|
||||
compatible = "arm,syscon-icst307";
|
||||
#clock-cells = <0>;
|
||||
lock-offset = <0x20>;
|
||||
|
||||
@ -80,7 +80,7 @@ Example 3: I2S controller node that consumes the clock generated by the clock
|
||||
controller. Refer to the standard clock bindings for information
|
||||
about 'clocks' and 'clock-names' property.
|
||||
|
||||
i2s0: i2s@03830000 {
|
||||
i2s0: i2s@3830000 {
|
||||
compatible = "samsung,i2s-v5";
|
||||
reg = <0x03830000 0x100>;
|
||||
dmas = <&pdma0 10
|
||||
|
||||
@ -43,7 +43,7 @@ Example: I2S controller node that consumes the clock generated by the clock
|
||||
controller. Refer to the standard clock bindings for information
|
||||
about 'clocks' and 'clock-names' property.
|
||||
|
||||
i2s0: i2s@03830000 {
|
||||
i2s0: i2s@3830000 {
|
||||
/* ... */
|
||||
clock-names = "iis", "i2s_opclk0",
|
||||
"i2s_opclk1";
|
||||
|
||||
@ -21,7 +21,7 @@ Required properties:
|
||||
a size of 8.
|
||||
- #clock-cells : from common clock binding; shall be set to 1
|
||||
|
||||
divider_clk: core-clock@0064 {
|
||||
divider_clk: core-clock@64 {
|
||||
compatible = "marvell,dove-divider-clock";
|
||||
reg = <0x0064 0x8>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
@ -10,13 +10,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
|
||||
for the full list of i.MX1 clock IDs.
|
||||
|
||||
Examples:
|
||||
clks: ccm@0021b000 {
|
||||
clks: ccm@21b000 {
|
||||
#clock-cells = <1>;
|
||||
compatible = "fsl,imx1-ccm";
|
||||
reg = <0x0021b000 0x1000>;
|
||||
};
|
||||
|
||||
pwm: pwm@00208000 {
|
||||
pwm: pwm@208000 {
|
||||
#pwm-cells = <2>;
|
||||
compatible = "fsl,imx1-pwm";
|
||||
reg = <0x00208000 0x1000>;
|
||||
|
||||
@ -14,14 +14,14 @@ Examples:
|
||||
|
||||
#include <dt-bindings/clock/imx6qdl-clock.h>
|
||||
|
||||
clks: ccm@020c4000 {
|
||||
clks: ccm@20c4000 {
|
||||
compatible = "fsl,imx6q-ccm";
|
||||
reg = <0x020c4000 0x4000>;
|
||||
interrupts = <0 87 0x04 0 88 0x04>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
uart1: serial@02020000 {
|
||||
uart1: serial@2020000 {
|
||||
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
|
||||
reg = <0x02020000 0x4000>;
|
||||
interrupts = <0 26 0x04>;
|
||||
|
||||
@ -46,7 +46,7 @@ Example:
|
||||
/* ... */
|
||||
|
||||
Node of the MFD chip
|
||||
max77686: max77686@09 {
|
||||
max77686: max77686@9 {
|
||||
compatible = "maxim,max77686";
|
||||
interrupt-parent = <&wakeup_eint>;
|
||||
interrupts = <26 0>;
|
||||
@ -71,7 +71,7 @@ Example:
|
||||
/* ... */
|
||||
|
||||
Node of the MFD chip
|
||||
max77802: max77802@09 {
|
||||
max77802: max77802@9 {
|
||||
compatible = "maxim,max77802";
|
||||
interrupt-parent = <&wakeup_eint>;
|
||||
interrupts = <26 0>;
|
||||
|
||||
@ -42,7 +42,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
clockgen-a@090ff000 {
|
||||
clockgen-a@90ff000 {
|
||||
compatible = "st,clkgen-c32";
|
||||
reg = <0x90ff000 0x1000>;
|
||||
|
||||
|
||||
@ -36,7 +36,7 @@ For the PRCM CCUs on A83T/H3/A64, two more clocks are needed:
|
||||
- "iosc": the SoC's internal frequency oscillator
|
||||
|
||||
Example for generic CCU:
|
||||
ccu: clock@01c20000 {
|
||||
ccu: clock@1c20000 {
|
||||
compatible = "allwinner,sun8i-h3-ccu";
|
||||
reg = <0x01c20000 0x400>;
|
||||
clocks = <&osc24M>, <&osc32k>;
|
||||
@ -46,7 +46,7 @@ ccu: clock@01c20000 {
|
||||
};
|
||||
|
||||
Example for PRCM CCU:
|
||||
r_ccu: clock@01f01400 {
|
||||
r_ccu: clock@1f01400 {
|
||||
compatible = "allwinner,sun50i-a64-r-ccu";
|
||||
reg = <0x01f01400 0x100>;
|
||||
clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>;
|
||||
|
||||
@ -137,7 +137,7 @@ the address block, which is related to the overall mmc block.
|
||||
|
||||
For example:
|
||||
|
||||
osc24M: clk@01c20050 {
|
||||
osc24M: clk@1c20050 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-osc-clk";
|
||||
reg = <0x01c20050 0x4>;
|
||||
@ -145,7 +145,7 @@ osc24M: clk@01c20050 {
|
||||
clock-output-names = "osc24M";
|
||||
};
|
||||
|
||||
pll1: clk@01c20000 {
|
||||
pll1: clk@1c20000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-pll1-clk";
|
||||
reg = <0x01c20000 0x4>;
|
||||
@ -153,7 +153,7 @@ pll1: clk@01c20000 {
|
||||
clock-output-names = "pll1";
|
||||
};
|
||||
|
||||
pll5: clk@01c20020 {
|
||||
pll5: clk@1c20020 {
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-pll5-clk";
|
||||
reg = <0x01c20020 0x4>;
|
||||
@ -161,7 +161,7 @@ pll5: clk@01c20020 {
|
||||
clock-output-names = "pll5_ddr", "pll5_other";
|
||||
};
|
||||
|
||||
pll6: clk@01c20028 {
|
||||
pll6: clk@1c20028 {
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun6i-a31-pll6-clk";
|
||||
reg = <0x01c20028 0x4>;
|
||||
@ -169,7 +169,7 @@ pll6: clk@01c20028 {
|
||||
clock-output-names = "pll6", "pll6x2";
|
||||
};
|
||||
|
||||
cpu: cpu@01c20054 {
|
||||
cpu: cpu@1c20054 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun4i-a10-cpu-clk";
|
||||
reg = <0x01c20054 0x4>;
|
||||
@ -177,7 +177,7 @@ cpu: cpu@01c20054 {
|
||||
clock-output-names = "cpu";
|
||||
};
|
||||
|
||||
mmc0_clk: clk@01c20088 {
|
||||
mmc0_clk: clk@1c20088 {
|
||||
#clock-cells = <1>;
|
||||
compatible = "allwinner,sun4i-a10-mmc-clk";
|
||||
reg = <0x01c20088 0x4>;
|
||||
@ -199,7 +199,7 @@ gmac_int_tx_clk: clk@3 {
|
||||
clock-output-names = "gmac_int_tx";
|
||||
};
|
||||
|
||||
gmac_clk: clk@01c20164 {
|
||||
gmac_clk: clk@1c20164 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "allwinner,sun7i-a20-gmac-clk";
|
||||
reg = <0x01c20164 0x4>;
|
||||
@ -211,7 +211,7 @@ gmac_clk: clk@01c20164 {
|
||||
clock-output-names = "gmac";
|
||||
};
|
||||
|
||||
mmc_config_clk: clk@01c13000 {
|
||||
mmc_config_clk: clk@1c13000 {
|
||||
compatible = "allwinner,sun9i-a80-mmc-config-clk";
|
||||
reg = <0x01c13000 0x10>;
|
||||
clocks = <&ahb0_gates 8>;
|
||||
|
||||
@ -25,7 +25,7 @@ Example:
|
||||
};
|
||||
};
|
||||
...
|
||||
i2c0: i2c-master@0d090000 {
|
||||
i2c0: i2c-master@d090000 {
|
||||
...
|
||||
cdce706: clock-synth@69 {
|
||||
compatible = "ti,cdce706";
|
||||
|
||||
@ -14,7 +14,7 @@ Optional properties:
|
||||
- reset-names : must contain "ahb"
|
||||
|
||||
Example:
|
||||
crypto: crypto-engine@01c15000 {
|
||||
crypto: crypto-engine@1c15000 {
|
||||
compatible = "allwinner,sun4i-a10-crypto";
|
||||
reg = <0x01c15000 0x1000>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@ -42,7 +42,7 @@ Optional properties:
|
||||
|
||||
example:
|
||||
|
||||
gpu_3d: gpu@00130000 {
|
||||
gpu_3d: gpu@130000 {
|
||||
compatible = "vivante,gc";
|
||||
reg = <0x00130000 0x4000>;
|
||||
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
@ -32,11 +32,11 @@ Optional properties
|
||||
|
||||
Example:
|
||||
|
||||
gpr: iomuxc-gpr@020e0000 {
|
||||
gpr: iomuxc-gpr@20e0000 {
|
||||
/* ... */
|
||||
};
|
||||
|
||||
hdmi: hdmi@0120000 {
|
||||
hdmi: hdmi@120000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,imx6q-hdmi";
|
||||
|
||||
@ -78,7 +78,7 @@ chosen {
|
||||
stdout-path = "display0";
|
||||
};
|
||||
|
||||
soc@01c00000 {
|
||||
soc@1c00000 {
|
||||
lcdc0: lcdc@1c0c000 {
|
||||
compatible = "allwinner,sun4i-a10-lcdc";
|
||||
...
|
||||
|
||||
@ -266,7 +266,7 @@ connector {
|
||||
};
|
||||
};
|
||||
|
||||
hdmi: hdmi@01c16000 {
|
||||
hdmi: hdmi@1c16000 {
|
||||
compatible = "allwinner,sun5i-a10s-hdmi";
|
||||
reg = <0x01c16000 0x1000>;
|
||||
interrupts = <58>;
|
||||
@ -305,7 +305,7 @@ hdmi: hdmi@01c16000 {
|
||||
};
|
||||
};
|
||||
|
||||
tve0: tv-encoder@01c0a000 {
|
||||
tve0: tv-encoder@1c0a000 {
|
||||
compatible = "allwinner,sun4i-a10-tv-encoder";
|
||||
reg = <0x01c0a000 0x1000>;
|
||||
clocks = <&ahb_gates 34>;
|
||||
|
||||
@ -12,7 +12,7 @@ Required properties:
|
||||
second cell holding the request line number.
|
||||
|
||||
Example:
|
||||
dma: dma-controller@01c02000 {
|
||||
dma: dma-controller@1c02000 {
|
||||
compatible = "allwinner,sun4i-a10-dma";
|
||||
reg = <0x01c02000 0x1000>;
|
||||
interrupts = <27>;
|
||||
@ -32,7 +32,7 @@ The three cells in order are:
|
||||
3. The port ID as specified in the datasheet
|
||||
|
||||
Example:
|
||||
spi2: spi@01c17000 {
|
||||
spi2: spi@1c17000 {
|
||||
compatible = "allwinner,sun4i-a10-spi";
|
||||
reg = <0x01c17000 0x1000>;
|
||||
interrupts = <0 12 4>;
|
||||
|
||||
@ -38,7 +38,7 @@ The two cells in order are:
|
||||
2. The port ID as specified in the datasheet
|
||||
|
||||
Example:
|
||||
spi2: spi@01c6a000 {
|
||||
spi2: spi@1c6a000 {
|
||||
compatible = "allwinner,sun6i-a31-spi";
|
||||
reg = <0x01c6a000 0x1000>;
|
||||
interrupts = <0 67 4>;
|
||||
|
||||
@ -142,7 +142,7 @@ mcasp0: mcasp@48038000 {
|
||||
};
|
||||
|
||||
2.
|
||||
edma1: edma@02728000 {
|
||||
edma1: edma@2728000 {
|
||||
compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
|
||||
reg = <0x02728000 0x8000>;
|
||||
reg-names = "edma3_cc";
|
||||
@ -165,13 +165,13 @@ edma1: edma@02728000 {
|
||||
power-domains = <&k2g_pds 0x4f>;
|
||||
};
|
||||
|
||||
edma1_tptc0: tptc@027b0000 {
|
||||
edma1_tptc0: tptc@27b0000 {
|
||||
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
|
||||
reg = <0x027b0000 0x400>;
|
||||
power-domains = <&k2g_pds 0x4f>;
|
||||
};
|
||||
|
||||
edma1_tptc1: tptc@027b8000 {
|
||||
edma1_tptc1: tptc@27b8000 {
|
||||
compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
|
||||
reg = <0x027b8000 0x400>;
|
||||
power-domains = <&k2g_pds 0x4f>;
|
||||
|
||||
@ -26,7 +26,7 @@ Controller:
|
||||
Client:
|
||||
Use specific request line passing from dmax
|
||||
For example, spdif0 tx channel request line is 4
|
||||
spdif0: spdif0@0b004000 {
|
||||
spdif0: spdif0@b004000 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "zte,zx296702-spdif";
|
||||
reg = <0x0b004000 0x1000>;
|
||||
|
||||
@ -66,7 +66,7 @@ See ".../sram/sram.txt" for the bindings.
|
||||
|
||||
Example:
|
||||
|
||||
hsp_top0: hsp@03c00000 {
|
||||
hsp_top0: hsp@3c00000 {
|
||||
...
|
||||
#mbox-cells = <2>;
|
||||
};
|
||||
|
||||
@ -25,7 +25,7 @@ Please refer to gpio.txt in this directory for details of the common GPIO
|
||||
bindings used by client devices.
|
||||
|
||||
Example:
|
||||
dspgpio0: keystone_dsp_gpio@02620240 {
|
||||
dspgpio0: keystone_dsp_gpio@2620240 {
|
||||
compatible = "ti,keystone-dsp-gpio";
|
||||
ti,syscon-dev = <&devctrl 0x240>;
|
||||
gpio-controller;
|
||||
|
||||
@ -30,7 +30,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
pdc_gpios: gpio-controller@02006500 {
|
||||
pdc_gpios: gpio-controller@2006500 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
|
||||
@ -59,7 +59,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
gpios: gpio-controller@02005800 {
|
||||
gpios: gpio-controller@2005800 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "img,tz1090-gpio";
|
||||
|
||||
@ -17,7 +17,7 @@ Optional properties :
|
||||
|
||||
Example :
|
||||
|
||||
i2c@02010084000 {
|
||||
i2c@2010084000 {
|
||||
compatible = "lsi,api2c";
|
||||
device_type = "i2c";
|
||||
#address-cells = <1>;
|
||||
|
||||
@ -24,7 +24,7 @@ Slave device properties:
|
||||
|
||||
Example:
|
||||
|
||||
p2wi@01f03400 {
|
||||
p2wi@1f03400 {
|
||||
compatible = "allwinner,sun6i-a31-p2wi";
|
||||
reg = <0x01f03400 0x400>;
|
||||
interrupts = <0 39 4>;
|
||||
|
||||
@ -19,7 +19,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
ak8974@0f {
|
||||
ak8974@f {
|
||||
compatible = "asahi-kasei,ak8974";
|
||||
reg = <0x0f>;
|
||||
avdd-supply = <&foo_reg>;
|
||||
|
||||
@ -13,7 +13,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
ak8975@0c {
|
||||
ak8975@c {
|
||||
compatible = "asahi-kasei,ak8975";
|
||||
reg = <0x0c>;
|
||||
gpios = <&gpj0 7 0>;
|
||||
|
||||
@ -19,7 +19,7 @@ Example:
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
lradc: lradc@01c22800 {
|
||||
lradc: lradc@1c22800 {
|
||||
compatible = "allwinner,sun4i-a10-lradc-keys";
|
||||
reg = <0x01c22800 0x100>;
|
||||
interrupts = <31>;
|
||||
|
||||
@ -10,7 +10,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
egalax_ts@04 {
|
||||
touchscreen@4 {
|
||||
compatible = "eeti,egalax_ts";
|
||||
reg = <0x04>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
|
||||
@ -21,7 +21,7 @@ Optional properties:
|
||||
each read. Valid values are 1, 4, 8, 16 and 32.
|
||||
|
||||
Example:
|
||||
tsc: tsc@02040000 {
|
||||
tsc: tsc@2040000 {
|
||||
compatible = "fsl,imx6ul-tsc";
|
||||
reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
|
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
||||
|
||||
@ -20,7 +20,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
sc-nmi-intc@01c00030 {
|
||||
sc-nmi-intc@1c00030 {
|
||||
compatible = "allwinner,sun7i-a20-sc-nmi";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
@ -20,7 +20,7 @@ Please refer to interrupts.txt in this directory for details of the common
|
||||
Interrupt Controllers bindings used by client devices.
|
||||
|
||||
Example:
|
||||
kirq0: keystone_irq0@026202a0 {
|
||||
kirq0: keystone_irq0@26202a0 {
|
||||
compatible = "ti,keystone-irq";
|
||||
ti,syscon-dev = <&devctrl 0x2a0>;
|
||||
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
@ -115,7 +115,7 @@ to non-secure vs secure interrupt line.
|
||||
iommus = <&apps_iommu 4>;
|
||||
};
|
||||
|
||||
gpu@01c00000 {
|
||||
gpu@1c00000 {
|
||||
...
|
||||
iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
|
||||
};
|
||||
|
||||
@ -32,7 +32,7 @@ syscon: syscon@10000000 {
|
||||
compatible = "arm,realview-pb1176-syscon", "syscon";
|
||||
reg = <0x10000000 0x1000>;
|
||||
|
||||
led@08.0 {
|
||||
led@8.0 {
|
||||
compatible = "register-bit-led";
|
||||
offset = <0x08>;
|
||||
mask = <0x01>;
|
||||
@ -40,7 +40,7 @@ syscon: syscon@10000000 {
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
};
|
||||
led@08.1 {
|
||||
led@8.1 {
|
||||
compatible = "register-bit-led";
|
||||
offset = <0x08>;
|
||||
mask = <0x02>;
|
||||
@ -48,7 +48,7 @@ syscon: syscon@10000000 {
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
led@08.2 {
|
||||
led@8.2 {
|
||||
compatible = "register-bit-led";
|
||||
offset = <0x08>;
|
||||
mask = <0x04>;
|
||||
@ -56,35 +56,35 @@ syscon: syscon@10000000 {
|
||||
linux,default-trigger = "cpu0";
|
||||
default-state = "off";
|
||||
};
|
||||
led@08.3 {
|
||||
led@8.3 {
|
||||
compatible = "register-bit-led";
|
||||
offset = <0x08>;
|
||||
mask = <0x08>;
|
||||
label = "versatile:3";
|
||||
default-state = "off";
|
||||
};
|
||||
led@08.4 {
|
||||
led@8.4 {
|
||||
compatible = "register-bit-led";
|
||||
offset = <0x08>;
|
||||
mask = <0x10>;
|
||||
label = "versatile:4";
|
||||
default-state = "off";
|
||||
};
|
||||
led@08.5 {
|
||||
led@8.5 {
|
||||
compatible = "register-bit-led";
|
||||
offset = <0x08>;
|
||||
mask = <0x20>;
|
||||
label = "versatile:5";
|
||||
default-state = "off";
|
||||
};
|
||||
led@08.6 {
|
||||
led@8.6 {
|
||||
compatible = "register-bit-led";
|
||||
offset = <0x08>;
|
||||
mask = <0x40>;
|
||||
label = "versatile:6";
|
||||
default-state = "off";
|
||||
};
|
||||
led@08.7 {
|
||||
led@8.7 {
|
||||
compatible = "register-bit-led";
|
||||
offset = <0x08>;
|
||||
mask = <0x80>;
|
||||
|
||||
@ -29,7 +29,7 @@ Required properties:
|
||||
Example(K2G):
|
||||
------------
|
||||
|
||||
msgmgr: msgmgr@02a00000 {
|
||||
msgmgr: msgmgr@2a00000 {
|
||||
compatible = "ti,k2g-message-manager";
|
||||
#mbox-cells = <2>;
|
||||
reg-names = "queue_proxy_region", "queue_state_debug_region";
|
||||
|
||||
@ -446,7 +446,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
|
||||
that services interrupts for this device.
|
||||
|
||||
Example Discovery CPU Error node:
|
||||
cpu-error@0070 {
|
||||
cpu-error@70 {
|
||||
compatible = "marvell,mv64360-cpu-error";
|
||||
reg = <0x70 0x10 0x128 0x28>;
|
||||
interrupts = <3>;
|
||||
@ -466,7 +466,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
|
||||
that services interrupts for this device.
|
||||
|
||||
Example Discovery SRAM Controller node:
|
||||
sram-ctrl@0380 {
|
||||
sram-ctrl@380 {
|
||||
compatible = "marvell,mv64360-sram-ctrl";
|
||||
reg = <0x380 0x80>;
|
||||
interrupts = <13>;
|
||||
|
||||
@ -27,7 +27,7 @@ Documentation/devicetree/bindings/media/video-interfaces.txt.
|
||||
|
||||
Example:
|
||||
|
||||
tc358743@0f {
|
||||
tc358743@f {
|
||||
compatible = "toshiba,tc358743";
|
||||
reg = <0x0f>;
|
||||
clocks = <&hdmi_osc>;
|
||||
|
||||
@ -25,7 +25,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
ir@02006200 {
|
||||
ir@2006200 {
|
||||
compatible = "img,ir-rev1";
|
||||
reg = <0x02006200 0x100>;
|
||||
interrupts = <29 4>;
|
||||
|
||||
@ -13,7 +13,7 @@ Required properties:
|
||||
|
||||
Example for STIH407:
|
||||
|
||||
sti-cec@094a087c {
|
||||
sti-cec@94a087c {
|
||||
compatible = "st,stih-cec";
|
||||
reg = <0x94a087c 0x64>;
|
||||
clocks = <&clk_sysin>;
|
||||
|
||||
@ -50,7 +50,7 @@ Example:
|
||||
|
||||
/* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */
|
||||
|
||||
c8sectpfe@08a20000 {
|
||||
c8sectpfe@8a20000 {
|
||||
compatible = "st,stih407-c8sectpfe";
|
||||
reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
|
||||
reg-names = "stfe", "stfe-ram";
|
||||
|
||||
@ -14,7 +14,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
ir0: ir@01c21800 {
|
||||
ir0: ir@1c21800 {
|
||||
compatible = "allwinner,sun4i-a10-ir";
|
||||
clocks = <&apb0_gates 6>, <&ir0_clk>;
|
||||
clock-names = "apb", "ir";
|
||||
|
||||
@ -19,7 +19,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
max77686: pmic@09 {
|
||||
max77686: pmic@9 {
|
||||
compatible = "maxim,max77686";
|
||||
interrupt-parent = <&wakeup_eint>;
|
||||
interrupts = <26 0>;
|
||||
|
||||
@ -18,7 +18,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
max77802: pmic@09 {
|
||||
max77802: pmic@9 {
|
||||
compatible = "maxim,max77802";
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <26 IRQ_TYPE_NONE>;
|
||||
|
||||
@ -41,7 +41,7 @@ foo@1000 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
reg = <0x01000 0x1000>;
|
||||
|
||||
led@08.0 {
|
||||
led@8.0 {
|
||||
compatible = "register-bit-led";
|
||||
offset = <0x08>;
|
||||
mask = <0x01>;
|
||||
|
||||
@ -10,7 +10,7 @@ Required properties:
|
||||
- #io-channel-cells: shall be 0,
|
||||
|
||||
Example:
|
||||
ths: ths@01c25000 {
|
||||
ths: ths@1c25000 {
|
||||
compatible = "allwinner,sun8i-a33-ths";
|
||||
reg = <0x01c25000 0x100>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
@ -47,7 +47,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
rtp: rtp@01c25000 {
|
||||
rtp: rtp@1c25000 {
|
||||
compatible = "allwinner,sun4i-a10-ts";
|
||||
reg = <0x01c25000 0x100>;
|
||||
interrupts = <29>;
|
||||
|
||||
@ -15,7 +15,7 @@ The prcm node may contain several subdevices definitions:
|
||||
|
||||
Example:
|
||||
|
||||
prcm: prcm@01f01400 {
|
||||
prcm: prcm@1f01400 {
|
||||
compatible = "allwinner,sun6i-a31-prcm";
|
||||
reg = <0x01f01400 0x200>;
|
||||
|
||||
|
||||
@ -18,7 +18,7 @@ Optional property:
|
||||
performed on the device.
|
||||
|
||||
Examples:
|
||||
gpr: iomuxc-gpr@020e0000 {
|
||||
gpr: iomuxc-gpr@20e0000 {
|
||||
compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
|
||||
reg = <0x020e0000 0x38>;
|
||||
};
|
||||
|
||||
@ -143,7 +143,7 @@ sdhci@ab000000 {
|
||||
|
||||
Example with sdio function subnode:
|
||||
|
||||
mmc3: mmc@01c12000 {
|
||||
mmc3: mmc@1c12000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
||||
@ -74,7 +74,7 @@ mmc0: sdhci@fe81e000 {
|
||||
|
||||
/* Example SD stih407 family configuration */
|
||||
|
||||
mmc1: sdhci@09080000 {
|
||||
mmc1: sdhci@9080000 {
|
||||
compatible = "st,sdhci-stih407", "st,sdhci";
|
||||
reg = <0x09080000 0x7ff>;
|
||||
reg-names = "mmc";
|
||||
@ -90,7 +90,7 @@ mmc1: sdhci@09080000 {
|
||||
|
||||
/* Example eMMC stih407 family configuration */
|
||||
|
||||
mmc0: sdhci@09060000 {
|
||||
mmc0: sdhci@9060000 {
|
||||
compatible = "st,sdhci-stih407", "st,sdhci";
|
||||
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
|
||||
reg-names = "mmc", "top-mmc-delay";
|
||||
|
||||
@ -29,7 +29,7 @@ Optional properties:
|
||||
|
||||
Examples:
|
||||
- Within .dtsi:
|
||||
mmc0: mmc@01c0f000 {
|
||||
mmc0: mmc@1c0f000 {
|
||||
compatible = "allwinner,sun5i-a13-mmc";
|
||||
reg = <0x01c0f000 0x1000>;
|
||||
clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>;
|
||||
@ -39,7 +39,7 @@ Examples:
|
||||
};
|
||||
|
||||
- Within dts:
|
||||
mmc0: mmc@01c0f000 {
|
||||
mmc0: mmc@1c0f000 {
|
||||
pinctrl-names = "default", "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>;
|
||||
pinctrl-1 = <&mmc0_cd_pin_reference_design>;
|
||||
|
||||
@ -31,7 +31,7 @@ see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
|
||||
|
||||
|
||||
Examples:
|
||||
nfc: nand@01c03000 {
|
||||
nfc: nand@1c03000 {
|
||||
compatible = "allwinner,sun4i-a10-nand";
|
||||
reg = <0x01c03000 0x1000>;
|
||||
interrupts = <0 37 1>;
|
||||
|
||||
@ -10,7 +10,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
emac: ethernet@01c0b000 {
|
||||
emac: ethernet@1c0b000 {
|
||||
compatible = "allwinner,sun4i-a10-emac";
|
||||
reg = <0x01c0b000 0x1000>;
|
||||
interrupts = <55>;
|
||||
|
||||
@ -9,7 +9,7 @@ Optional properties:
|
||||
- phy-supply: phandle to a regulator if the PHY needs one
|
||||
|
||||
Example at the SoC level:
|
||||
mdio@01c0b080 {
|
||||
mdio@1c0b080 {
|
||||
compatible = "allwinner,sun4i-a10-mdio";
|
||||
reg = <0x01c0b080 0x14>;
|
||||
#address-cells = <1>;
|
||||
@ -18,7 +18,7 @@ mdio@01c0b080 {
|
||||
|
||||
And at the board level:
|
||||
|
||||
mdio@01c0b080 {
|
||||
mdio@1c0b080 {
|
||||
phy-supply = <®_emac_3v3>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
|
||||
@ -15,7 +15,7 @@ Optional properties:
|
||||
|
||||
Examples:
|
||||
|
||||
gmac: ethernet@01c50000 {
|
||||
gmac: ethernet@1c50000 {
|
||||
compatible = "allwinner,sun7i-a20-gmac";
|
||||
reg = <0x01c50000 0x10000>,
|
||||
<0x01c20164 0x4>;
|
||||
|
||||
@ -109,7 +109,7 @@ ethernet@f0ba0000 {
|
||||
reg = <0xf0ba0000 0xfc4c>;
|
||||
interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
|
||||
|
||||
mdio@0e14 {
|
||||
mdio@e14 {
|
||||
compatible = "brcm,genet-mdio-v4";
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
@ -45,7 +45,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
SoC dtsi:
|
||||
m_can1: can@020e8000 {
|
||||
m_can1: can@20e8000 {
|
||||
compatible = "bosch,m_can";
|
||||
reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
|
||||
reg-names = "m_can", "message_ram";
|
||||
|
||||
@ -19,7 +19,7 @@ SoC common .dtsi file:
|
||||
allwinner,pull = <0>;
|
||||
};
|
||||
...
|
||||
can0: can@01c2bc00 {
|
||||
can0: can@1c2bc00 {
|
||||
compatible = "allwinner,sun4i-a10-can";
|
||||
reg = <0x01c2bc00 0x400>;
|
||||
interrupts = <0 26 4>;
|
||||
@ -29,7 +29,7 @@ SoC common .dtsi file:
|
||||
|
||||
Board specific .dts file:
|
||||
|
||||
can0: can@01c2bc00 {
|
||||
can0: can@1c2bc00 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&can0_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
@ -20,7 +20,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
mmc3: mmc@01c12000 {
|
||||
mmc3: mmc@1c12000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
||||
@ -13,13 +13,13 @@ Are child nodes of qfprom, bindings of which as described in
|
||||
bindings/nvmem/nvmem.txt
|
||||
|
||||
Example for sun4i:
|
||||
sid@01c23800 {
|
||||
sid@1c23800 {
|
||||
compatible = "allwinner,sun4i-a10-sid";
|
||||
reg = <0x01c23800 0x10>
|
||||
};
|
||||
|
||||
Example for sun7i:
|
||||
sid@01c23800 {
|
||||
sid@1c23800 {
|
||||
compatible = "allwinner,sun7i-a20-sid";
|
||||
reg = <0x01c23800 0x200>
|
||||
};
|
||||
|
||||
@ -10,7 +10,7 @@ Required Properties:
|
||||
|
||||
Example:
|
||||
|
||||
otp: otp@0301c800 {
|
||||
otp: otp@301c800 {
|
||||
compatible = "brcm,ocotp";
|
||||
reg = <0x0301c800 0x2c>;
|
||||
brcm,ocotp-size = <2048>;
|
||||
|
||||
@ -19,7 +19,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
ocotp: ocotp@021bc000 {
|
||||
ocotp: ocotp@21bc000 {
|
||||
compatible = "fsl,imx6q-ocotp", "syscon";
|
||||
reg = <0x021bc000 0x4000>;
|
||||
clocks = <&clks IMX6QDL_CLK_IIM>;
|
||||
|
||||
@ -33,7 +33,7 @@ bits: Is pair of bit location and number of bits, which specifies offset
|
||||
For example:
|
||||
|
||||
/* Provider */
|
||||
qfprom: qfprom@00700000 {
|
||||
qfprom: qfprom@700000 {
|
||||
...
|
||||
|
||||
/* Data cells */
|
||||
|
||||
@ -12,7 +12,7 @@ bindings/nvmem/nvmem.txt
|
||||
|
||||
Example:
|
||||
|
||||
qfprom: qfprom@00700000 {
|
||||
qfprom: qfprom@700000 {
|
||||
compatible = "qcom,qfprom";
|
||||
reg = <0x00700000 0x8000>;
|
||||
...
|
||||
|
||||
@ -255,7 +255,7 @@ Tegra30:
|
||||
|
||||
SoC DTSI:
|
||||
|
||||
pcie-controller@00003000 {
|
||||
pcie-controller@3000 {
|
||||
compatible = "nvidia,tegra30-pcie";
|
||||
device_type = "pci";
|
||||
reg = <0x00003000 0x00000800 /* PADS registers */
|
||||
@ -334,7 +334,7 @@ SoC DTSI:
|
||||
|
||||
Board DTS:
|
||||
|
||||
pcie-controller@00003000 {
|
||||
pcie-controller@3000 {
|
||||
status = "okay";
|
||||
|
||||
avdd-pexa-supply = <&ldo1_reg>;
|
||||
@ -360,7 +360,7 @@ Tegra124:
|
||||
|
||||
SoC DTSI:
|
||||
|
||||
pcie-controller@01003000 {
|
||||
pcie-controller@1003000 {
|
||||
compatible = "nvidia,tegra124-pcie";
|
||||
device_type = "pci";
|
||||
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
|
||||
@ -425,7 +425,7 @@ SoC DTSI:
|
||||
|
||||
Board DTS:
|
||||
|
||||
pcie-controller@01003000 {
|
||||
pcie-controller@1003000 {
|
||||
status = "okay";
|
||||
|
||||
avddio-pex-supply = <&vdd_1v05_run>;
|
||||
@ -456,7 +456,7 @@ Tegra210:
|
||||
|
||||
SoC DTSI:
|
||||
|
||||
pcie-controller@01003000 {
|
||||
pcie-controller@1003000 {
|
||||
compatible = "nvidia,tegra210-pcie";
|
||||
device_type = "pci";
|
||||
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
|
||||
@ -521,7 +521,7 @@ SoC DTSI:
|
||||
|
||||
Board DTS:
|
||||
|
||||
pcie-controller@01003000 {
|
||||
pcie-controller@1003000 {
|
||||
status = "okay";
|
||||
|
||||
avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
|
||||
|
||||
@ -15,7 +15,7 @@ Required properties For the child node:
|
||||
- #phy-cells: must be 0
|
||||
|
||||
Example:
|
||||
pcie_phy: phy@0301d0a0 {
|
||||
pcie_phy: phy@301d0a0 {
|
||||
compatible = "brcm,cygnus-pcie-phy";
|
||||
reg = <0x0301d0a0 0x14>;
|
||||
|
||||
|
||||
@ -23,7 +23,7 @@ Optional properties:
|
||||
the 17.78mA TX reference current. Default: 100
|
||||
|
||||
Example:
|
||||
usbphy1: usbphy@020c9000 {
|
||||
usbphy1: usbphy@20c9000 {
|
||||
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
|
||||
reg = <0x020c9000 0x1000>;
|
||||
interrupts = <0 44 0x04>;
|
||||
|
||||
@ -25,7 +25,7 @@ It is recommended to list all clocks and resets available.
|
||||
The driver will only use those matching the phy_type.
|
||||
|
||||
Example:
|
||||
usbphy1: phy@00a01800 {
|
||||
usbphy1: phy@a01800 {
|
||||
compatible = "allwinner,sun9i-a80-usb-phy";
|
||||
reg = <0x00a01800 0x4>;
|
||||
clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
|
||||
|
||||
@ -89,7 +89,7 @@ Optional subnode-properties:
|
||||
|
||||
Examples:
|
||||
|
||||
pio: pinctrl@01c20800 {
|
||||
pio: pinctrl@1c20800 {
|
||||
compatible = "allwinner,sun5i-a13-pinctrl";
|
||||
reg = <0x01c20800 0x400>;
|
||||
#address-cells = <1>;
|
||||
|
||||
@ -58,14 +58,14 @@ Some requirements for using fsl,imx-pinctrl binding:
|
||||
configurations by referring to the phandle of that pin configuration node.
|
||||
|
||||
Examples:
|
||||
usdhc@0219c000 { /* uSDHC4 */
|
||||
usdhc@219c000 { /* uSDHC4 */
|
||||
non-removable;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc4_1>;
|
||||
};
|
||||
|
||||
iomuxc@020e0000 {
|
||||
iomuxc@20e0000 {
|
||||
compatible = "fsl,imx6q-iomuxc";
|
||||
reg = <0x020e0000 0x4000>;
|
||||
|
||||
|
||||
@ -89,7 +89,7 @@ Valid values for pin and group names are:
|
||||
|
||||
Example:
|
||||
|
||||
pinctrl_pdc: pinctrl@02006500 {
|
||||
pinctrl_pdc: pinctrl@2006500 {
|
||||
#gpio-range-cells = <3>;
|
||||
compatible = "img,tz1090-pdc-pinctrl";
|
||||
reg = <0x02006500 0x100>;
|
||||
@ -121,7 +121,7 @@ Example board file extracts:
|
||||
};
|
||||
};
|
||||
|
||||
ir: ir@02006200 {
|
||||
ir: ir@2006200 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&irmod_default>;
|
||||
};
|
||||
|
||||
@ -197,7 +197,7 @@ Valid values for pin and group names are:
|
||||
|
||||
Example:
|
||||
|
||||
pinctrl: pinctrl@02005800 {
|
||||
pinctrl: pinctrl@2005800 {
|
||||
#gpio-range-cells = <3>;
|
||||
compatible = "img,tz1090-pinctrl";
|
||||
reg = <0x02005800 0xe4>;
|
||||
@ -221,7 +221,7 @@ Example board file extract:
|
||||
};
|
||||
};
|
||||
|
||||
uart@02004b00 {
|
||||
uart@2004b00 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_default>;
|
||||
};
|
||||
|
||||
@ -97,7 +97,7 @@ SoC file extract:
|
||||
Board file extract:
|
||||
-------------------
|
||||
|
||||
pcie-controller@01003000 {
|
||||
pcie-controller@1003000 {
|
||||
...
|
||||
|
||||
phys = <&padctl 0>;
|
||||
|
||||
@ -86,7 +86,7 @@ Examples:
|
||||
reg = <0 0x1020C020 0 0x1000>;
|
||||
};
|
||||
|
||||
pinctrl@01c20800 {
|
||||
pinctrl@1c20800 {
|
||||
compatible = "mediatek,mt8135-pinctrl";
|
||||
reg = <0 0x1000B000 0 0x1000>;
|
||||
mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
|
||||
|
||||
@ -89,7 +89,7 @@ Example:
|
||||
interrupt-names = "irqmux";
|
||||
ranges = <0 0x09610000 0x6000>;
|
||||
|
||||
pio0: gpio@09610000 {
|
||||
pio0: gpio@9610000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
||||
@ -175,7 +175,7 @@ to specify in a pin configuration subnode:
|
||||
|
||||
Example:
|
||||
|
||||
tlmm: pinctrl@01010000 {
|
||||
tlmm: pinctrl@1010000 {
|
||||
compatible = "qcom,msm8996-pinctrl";
|
||||
reg = <0x01010000 0x300000>;
|
||||
interrupts = <0 208 0>;
|
||||
|
||||
@ -40,7 +40,7 @@ Optional properties:
|
||||
|
||||
Example:
|
||||
|
||||
gpc: gpc@020dc000 {
|
||||
gpc: gpc@20dc000 {
|
||||
compatible = "fsl,imx6q-gpc";
|
||||
reg = <0x020dc000 0x4000>;
|
||||
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
|
||||
@ -80,7 +80,7 @@ that is a phandle pointing to the power domain the device belongs to.
|
||||
|
||||
Example of a device that is part of the PU power domain:
|
||||
|
||||
vpu: vpu@02040000 {
|
||||
vpu: vpu@2040000 {
|
||||
reg = <0x02040000 0x3c000>;
|
||||
/* ... */
|
||||
power-domains = <&pd_pu>;
|
||||
|
||||
@ -10,7 +10,7 @@ Required Properties:
|
||||
-reg: Specifies the physical address of the SNVS_LPCR register
|
||||
|
||||
Example:
|
||||
snvs@020cc000 {
|
||||
snvs@20cc000 {
|
||||
compatible = "fsl,sec-v4.0-mon", "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
@ -37,12 +37,12 @@ Example 1:
|
||||
Setup keystone reset so that in case software reset or
|
||||
WDT0 is triggered it issues hard reset for SoC.
|
||||
|
||||
pllctrl: pll-controller@02310000 {
|
||||
pllctrl: pll-controller@2310000 {
|
||||
compatible = "ti,keystone-pllctrl", "syscon";
|
||||
reg = <0x02310000 0x200>;
|
||||
};
|
||||
|
||||
devctrl: device-state-control@02620000 {
|
||||
devctrl: device-state-control@2620000 {
|
||||
compatible = "ti,keystone-devctrl", "syscon";
|
||||
reg = <0x02620000 0x1000>;
|
||||
};
|
||||
|
||||
@ -8,7 +8,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
mcu@0a {
|
||||
mcu@a {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mc9s08qg8-mpc8349emitx",
|
||||
"fsl,mcu-mpc8349emitx";
|
||||
|
||||
@ -14,7 +14,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
pwm: pwm@01c20e00 {
|
||||
pwm: pwm@1c20e00 {
|
||||
compatible = "allwinner,sun7i-a20-pwm";
|
||||
reg = <0x01c20e00 0xc>;
|
||||
clocks = <&osc24M>;
|
||||
|
||||
@ -40,7 +40,7 @@ to get matched with their hardware counterparts as follow:
|
||||
|
||||
Example:
|
||||
|
||||
max77686: pmic@09 {
|
||||
max77686: pmic@9 {
|
||||
compatible = "maxim,max77686";
|
||||
interrupt-parent = <&wakeup_eint>;
|
||||
interrupts = <26 IRQ_TYPE_NONE>;
|
||||
|
||||
@ -71,7 +71,7 @@ has not been disabled for that state using "regulator-off-in-suspend".
|
||||
|
||||
Example:
|
||||
|
||||
max77802@09 {
|
||||
max77802@9 {
|
||||
compatible = "maxim,max77802";
|
||||
interrupt-parent = <&wakeup_eint>;
|
||||
interrupts = <26 0>;
|
||||
|
||||
@ -14,7 +14,7 @@ Required properties:
|
||||
|
||||
example:
|
||||
|
||||
ahb1_rst: reset@01c202c0 {
|
||||
ahb1_rst: reset@1c202c0 {
|
||||
#reset-cells = <1>;
|
||||
compatible = "allwinner,sun6i-a31-ahb1-reset";
|
||||
reg = <0x01c202c0 0xc>;
|
||||
|
||||
@ -14,7 +14,7 @@ Required properties:
|
||||
|
||||
example:
|
||||
|
||||
src: src@020d8000 {
|
||||
src: src@20d8000 {
|
||||
compatible = "fsl,imx6q-src";
|
||||
reg = <0x020d8000 0x4000>;
|
||||
interrupts = <0 91 0x04 0 96 0x04>;
|
||||
@ -33,10 +33,10 @@ reset.txt
|
||||
|
||||
example:
|
||||
|
||||
ipu1: ipu@02400000 {
|
||||
ipu1: ipu@2400000 {
|
||||
resets = <&src 2>;
|
||||
};
|
||||
ipu2: ipu@02800000 {
|
||||
ipu2: ipu@2800000 {
|
||||
resets = <&src 4>;
|
||||
};
|
||||
|
||||
|
||||
@ -67,7 +67,7 @@ using the syscon node, and a consumer (a DSP device) on the TI Keystone 2
|
||||
|
||||
/ {
|
||||
soc {
|
||||
psc: power-sleep-controller@02350000 {
|
||||
psc: power-sleep-controller@2350000 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
reg = <0x02350000 0x1000>;
|
||||
|
||||
|
||||
@ -17,7 +17,7 @@ Required properties for new device trees
|
||||
|
||||
Example:
|
||||
|
||||
rtc: rtc@01f00000 {
|
||||
rtc: rtc@1f00000 {
|
||||
compatible = "allwinner,sun6i-a31-rtc";
|
||||
reg = <0x01f00000 0x54>;
|
||||
interrupts = <0 40 4>, <0 41 4>;
|
||||
|
||||
@ -10,7 +10,7 @@ Required properties:
|
||||
|
||||
Example:
|
||||
|
||||
rtc: rtc@01c20d00 {
|
||||
rtc: rtc@1c20d00 {
|
||||
compatible = "allwinner,sun4i-a10-rtc";
|
||||
reg = <0x01c20d00 0x20>;
|
||||
interrupts = <24>;
|
||||
|
||||
@ -18,7 +18,7 @@ par_io@1400 {
|
||||
#size-cells = <0>;
|
||||
device_type = "par_io";
|
||||
num-ports = <7>;
|
||||
ucc_pin@01 {
|
||||
ucc_pin@1 {
|
||||
......
|
||||
};
|
||||
|
||||
|
||||
@ -26,7 +26,7 @@ Required properties:
|
||||
interrupts.
|
||||
|
||||
Example:
|
||||
ucc_pin@01 {
|
||||
ucc_pin@1 {
|
||||
pio-map = <
|
||||
/* port pin dir open_drain assignment has_irq */
|
||||
0 3 1 0 1 0 /* TxD0 */
|
||||
|
||||
@ -51,7 +51,7 @@ of valid identifiers for k2g.
|
||||
|
||||
Example (K2G):
|
||||
--------------------
|
||||
uart0: serial@02530c00 {
|
||||
uart0: serial@2530c00 {
|
||||
compatible = "ns16550a";
|
||||
...
|
||||
power-domains = <&k2g_pds 0x002c>;
|
||||
|
||||
@ -9,7 +9,7 @@ Required properties:
|
||||
|
||||
Examples:
|
||||
|
||||
i2s0: xtfpga-i2s@0d080000 {
|
||||
i2s0: xtfpga-i2s@d080000 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "cdns,xtfpga-i2s";
|
||||
reg = <0x0d080000 0x40>;
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user