OMAP4: hwmod: Introduce the module control in hwmod control

Take advantage of the explicit modulemode control to fix
the way parents clocks are managed.
A module must be disabled before any parents are disabled.
That programming model was not possible with the previous
implementation that was considering a modulemode as a leaf
clock node managed by the clock fmwk.
This was leading to bad crash upon disable when the parent
clock was gated before the module completed its transition
to idle.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
This commit is contained in:
Benoit Cousson 2011-07-10 05:56:33 -06:00 committed by Paul Walmsley
parent 288d6a1618
commit 45c38252d7

View File

@ -679,6 +679,56 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
}
}
/**
* _enable_module - enable CLKCTRL modulemode on OMAP4
* @oh: struct omap_hwmod *
*
* Enables the PRCM module mode related to the hwmod @oh.
* No return value.
*/
static void _enable_module(struct omap_hwmod *oh)
{
/* The module mode does not exist prior OMAP4 */
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return;
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return;
pr_debug("omap_hwmod: %s: _enable_module: %d\n",
oh->name, oh->prcm.omap4.modulemode);
omap4_cminst_module_enable(oh->prcm.omap4.modulemode,
oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
/**
* _disable_module - enable CLKCTRL modulemode on OMAP4
* @oh: struct omap_hwmod *
*
* Disable the PRCM module mode related to the hwmod @oh.
* No return value.
*/
static void _disable_module(struct omap_hwmod *oh)
{
/* The module mode does not exist prior OMAP4 */
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return;
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return;
pr_debug("omap_hwmod: %s: _disable_module\n", oh->name);
omap4_cminst_module_disable(oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
/**
* _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
* @oh: struct omap_hwmod *oh
@ -1424,6 +1474,7 @@ static int _enable(struct omap_hwmod *oh)
return r;
}
_enable_module(oh);
oh->_state = _HWMOD_STATE_ENABLED;
@ -1460,11 +1511,18 @@ static int _idle(struct omap_hwmod *oh)
if (oh->class->sysc)
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
_disable_clocks(oh);
_disable_module(oh);
ret = _wait_target_disable(oh);
if (ret)
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
oh->name);
/*
* The module must be in idle mode before disabling any parents
* clocks. Otherwise, the parent clock might be disabled before
* the module transition is done, and thus will prevent the
* transition to complete properly.
*/
_disable_clocks(oh);
/* Mux pins for device idle if populated */
if (oh->mux && oh->mux->pads_dynamic)
@ -1556,11 +1614,12 @@ static int _shutdown(struct omap_hwmod *oh)
if (oh->_state == _HWMOD_STATE_ENABLED) {
_del_initiator_dep(oh, mpu_oh);
/* XXX what about the other system initiators here? dma, dsp */
_disable_clocks(oh);
_disable_module(oh);
ret = _wait_target_disable(oh);
if (ret)
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
oh->name);
_disable_clocks(oh);
}
/* XXX Should this code also force-disable the optional clocks? */