Merge branch 'pm-avs'

* pm-avs:
  PM: AVS: Drop the avs directory and the corresponding Kconfig
  PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
  PM: AVS: smartreflex Move driver to soc specific drivers
  PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers

MAINTAINERS

@@ -5395,11 +5395,11 @@ F:	include/linux/debugfs.h
 F:	include/linux/kobj*
 F:	lib/kobj*
 
-DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS)
+DRIVERS FOR OMAP ADAPTIVE VOLTAGE SCALING (AVS)
 M:	Nishanth Menon <nm@ti.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-F:	drivers/power/avs/
+F:	drivers/soc/ti/smartreflex.c
 F:	include/linux/power/smartreflex.h
 
 DRM DRIVER FOR ALLWINNER DE2 AND DE3 ENGINE
@@ -14362,7 +14362,7 @@ L:	linux-pm@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
-F:	drivers/power/avs/qcom-cpr.c
+F:	drivers/soc/qcom/cpr.c
 
 QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
 M:	Ilia Lin <ilia.lin@kernel.org>

arch/arm/plat-omap/Kconfig

@@ -23,7 +23,7 @@ config OMAP_DEBUG_LEDS
 
 config POWER_AVS_OMAP
 	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
-	depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
+	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
 	select POWER_SUPPLY
 	help
 	  Say Y to enable AVS(Adaptive Voltage Scaling)

drivers/power/Kconfig

@@ -1,4 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
-source "drivers/power/avs/Kconfig"
 source "drivers/power/reset/Kconfig"
 source "drivers/power/supply/Kconfig"

drivers/power/Makefile

@@ -1,4 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_POWER_AVS)		+= avs/
 obj-$(CONFIG_POWER_RESET)	+= reset/
 obj-$(CONFIG_POWER_SUPPLY)	+= supply/

drivers/power/avs/Kconfig

@@ -1,37 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig POWER_AVS
-	bool "Adaptive Voltage Scaling class support"
-	help
-	  AVS is a power management technique which finely controls the
-	  operating voltage of a device in order to optimize (i.e. reduce)
-	  its power consumption.
-	  At a given operating point the voltage is adapted depending on
-	  static factors (chip manufacturing process) and dynamic factors
-	  (temperature depending performance).
-	  AVS is also called SmartReflex on OMAP devices.
-
-	  Say Y here to enable Adaptive Voltage Scaling class support.
-
-config QCOM_CPR
-	tristate "QCOM Core Power Reduction (CPR) support"
-	depends on POWER_AVS && HAS_IOMEM
-	select PM_OPP
-	select REGMAP
-	help
-	  Say Y here to enable support for the CPR hardware found on Qualcomm
-	  SoCs like QCS404.
-
-	  This driver populates CPU OPPs tables and makes adjustments to the
-	  tables based on feedback from the CPR hardware. If you want to do
-	  CPUfrequency scaling say Y here.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called qcom-cpr
-
-config ROCKCHIP_IODOMAIN
-	tristate "Rockchip IO domain support"
-	depends on POWER_AVS && ARCH_ROCKCHIP && OF
-	help
-	  Say y here to enable support io domains on Rockchip SoCs. It is
-	  necessary for the io domain setting of the SoC to match the
-	  voltage supplied by the regulators.

drivers/power/avs/Makefile

@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_POWER_AVS_OMAP)		+= smartreflex.o
-obj-$(CONFIG_QCOM_CPR)			+= qcom-cpr.o
-obj-$(CONFIG_ROCKCHIP_IODOMAIN)		+= rockchip-io-domain.o

drivers/soc/qcom/Kconfig

@@ -26,6 +26,22 @@ config QCOM_COMMAND_DB
 	  resource on a RPM-hardened platform must use this database to get
 	  SoC specific identifier and information for the shared resources.
 
+config QCOM_CPR
+	tristate "QCOM Core Power Reduction (CPR) support"
+	depends on ARCH_QCOM && HAS_IOMEM
+	select PM_OPP
+	select REGMAP
+	help
+	  Say Y here to enable support for the CPR hardware found on Qualcomm
+	  SoCs like QCS404.
+
+	  This driver populates CPU OPPs tables and makes adjustments to the
+	  tables based on feedback from the CPR hardware. If you want to do
+	  CPUfrequency scaling say Y here.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called qcom-cpr
+
 config QCOM_GENI_SE
 	tristate "QCOM GENI Serial Engine Driver"
 	depends on ARCH_QCOM || COMPILE_TEST

drivers/soc/qcom/Makefile

@@ -3,6 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src)
 obj-$(CONFIG_QCOM_AOSS_QMP) +=	qcom_aoss.o
 obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
 obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
+obj-$(CONFIG_QCOM_CPR)		+= cpr.o
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o

drivers/soc/rockchip/Kconfig

@@ -14,6 +14,14 @@ config ROCKCHIP_GRF
 	  In a lot of cases there also need to be default settings initialized
 	  to make some of them conform to expectations of the kernel.
 
+config ROCKCHIP_IODOMAIN
+	tristate "Rockchip IO domain support"
+	depends on OF
+	help
+	  Say y here to enable support io domains on Rockchip SoCs. It is
+	  necessary for the io domain setting of the SoC to match the
+	  voltage supplied by the regulators.
+
 config ROCKCHIP_PM_DOMAINS
         bool "Rockchip generic power domain"
         depends on PM

drivers/soc/rockchip/Makefile

@@ -3,4 +3,5 @@
 # Rockchip Soc drivers
 #
 obj-$(CONFIG_ROCKCHIP_GRF) += grf.o
+obj-$(CONFIG_ROCKCHIP_IODOMAIN) += io-domain.o
 obj-$(CONFIG_ROCKCHIP_PM_DOMAINS) += pm_domains.o

drivers/soc/ti/Makefile

@@ -12,3 +12,4 @@ obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
 obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN)	+= ti_sci_inta_msi.o
 obj-$(CONFIG_TI_K3_RINGACC)		+= k3-ringacc.o
 obj-$(CONFIG_TI_K3_SOCINFO)		+= k3-socinfo.o
+obj-$(CONFIG_POWER_AVS_OMAP)		+= smartreflex.o