Devicetree fixes for v5.8:

- Another round of whack-a-mole removing 'allOf', redundant cases of
   'maxItems' and incorrect 'reg' sizes
 
 - Fix support for yaml.h in non-standard paths
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl7jpqgQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw9a1EACKnjbeaqqk6lFr9Ny5XSRqYzb6kJW8z6g+
 jULhF0J22dbR3XTtG8fZ5en+tZx2D4bYrxaK6LC4oo++JJpVx6uijqo/S63c/x6d
 KpcSSicriGojdK7pDbr7CMc3oJdwDbW9ESUuVga2Dam82yHFHx0e3BRWBE2k0yat
 UVtRDkqKTf/AQ4U2n0QkeMRyCCE5MTq82baB9FxltNWgMgcyC8qNJDHcsphJo9IY
 g7kVcZgUdteb9e8O5EF5hoNmU0ybTggFCIFjuNGolOGfmPN6AcZMvrV0iwjAwHeI
 yE2P3SFXa0xXWM0gwOCWQkOzUBiRd8u04cm6bTJZl6JtBR7omTTb/AQ8ClFmktDB
 7aXjdvOM16GSTFiuT+Cur0fDN88UkV7AHYPzX95mg0iFphTVM6jIZEsypBG9qwMS
 ipn64X3mrmykUqHZW1PcvJdWhFlLeeQaaGRLNDt+6Wn8ndmsPTLM4oCRtU9KVP5V
 NmmUEqm6ewaTw5GcE4IZ/NcrpK6KQg0q8hPAYjqtVGITcXXes+wppqKBRUNqQ0z6
 EH7tEXo3gHXLLtDByprG5QUVF0DJWmrrUauaDnSC6wzBzGST681f4WFOI/Jya3Wr
 9VDB4Nbd2SuTYLKkLd5uw6km1BDrHgwC/OrRXheOU4vetkddUmq6j98Pqyd/nz1q
 Uln338Ta+w==
 =eCo3
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree fixes from Rob Herring:

 - Another round of whack-a-mole removing 'allOf', redundant cases of
   'maxItems' and incorrect 'reg' sizes

 - Fix support for yaml.h in non-standard paths

* tag 'devicetree-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Remove redundant 'maxItems'
  dt-bindings: Fix more incorrect 'reg' property sizes in examples
  dt-bindings: phy: qcom: Fix missing 'ranges' and example addresses
  dt-bindings: Remove more cases of 'allOf' containing a '$ref'
  scripts/dtc: use pkg-config to include <yaml.h> in non-standard path
This commit is contained in:
Linus Torvalds 2020-06-12 11:56:43 -07:00
commit 4071b856af
51 changed files with 273 additions and 363 deletions

View File

@ -85,9 +85,8 @@ properties:
CPU power good signal from external PMIC to PMC is enabled.
nvidia,suspend-mode:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
description:
The suspend mode that the platform should use.
Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh

View File

@ -40,28 +40,25 @@ properties:
calxeda,led-order:
description: Maps port numbers to offsets within the SGPIO bitstream.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
calxeda,port-phys:
description: |
phandle-combophy and lane assignment, which maps each SATA port to a
combophy and a lane within that combophy
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- minItems: 1
maxItems: 8
$ref: /schemas/types.yaml#/definitions/phandle-array
minItems: 1
maxItems: 8
calxeda,tx-atten:
description: |
Contains TX attenuation override codes, one per port.
The upper 24 bits of each entry are always 0 and thus ignored.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
calxeda,sgpio-gpio:
description: |

View File

@ -71,8 +71,8 @@ examples:
bus@1f059000 {
compatible = "baikal,bt1-apb", "simple-bus";
reg = <0 0x1f059000 0 0x1000>,
<0 0x1d000000 0 0x2040000>;
reg = <0x1f059000 0x1000>,
<0x1d000000 0x2040000>;
reg-names = "ehb", "nodev";
#address-cells = <1>;
#size-cells = <1>;

View File

@ -85,8 +85,8 @@ examples:
bus@1f05a000 {
compatible = "baikal,bt1-axi", "simple-bus";
reg = <0 0x1f05a000 0 0x1000>,
<0 0x1f04d110 0 0x8>;
reg = <0x1f05a000 0x1000>,
<0x1f04d110 0x8>;
reg-names = "qos", "ehb";
#address-cells = <1>;
#size-cells = <1>;

View File

@ -23,7 +23,6 @@ properties:
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
maxItems: 2
'#clock-cells':
const: 1

View File

@ -23,7 +23,6 @@ properties:
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
maxItems: 2
'#clock-cells':
const: 1

View File

@ -23,7 +23,6 @@ properties:
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
maxItems: 2
'#clock-cells':
const: 1

View File

@ -23,7 +23,6 @@ properties:
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
maxItems: 2
'#clock-cells':
const: 1

View File

@ -23,7 +23,6 @@ properties:
items:
- description: CCM interrupt request 1
- description: CCM interrupt request 2
maxItems: 2
'#clock-cells':
const: 1

View File

@ -106,8 +106,8 @@ examples:
#include <dt-bindings/power/rk3288-power.h>
vopb: vopb@ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0x0 0xff930000 0x0 0x19c>,
<0x0 0xff931000 0x0 0x1000>;
reg = <0xff930000 0x19c>,
<0xff931000 0x1000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>,
<&cru DCLK_VOP0>,

View File

@ -63,11 +63,10 @@ patternProperties:
snps,nr-gpios:
description: The number of GPIO pins exported by the port.
$ref: /schemas/types.yaml#/definitions/uint32
default: 32
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 1
maximum: 32
minimum: 1
maximum: 32
interrupts:
description: |

View File

@ -67,8 +67,7 @@ properties:
1 - direct_sync
2 - scaled_sync
3 - pulse_sync
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3

View File

@ -25,9 +25,8 @@ properties:
amstaos,cover-comp-gain:
description: Multiplier for gain compensation
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [1, 16]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 16]
required:
- compatible

View File

@ -40,10 +40,9 @@ properties:
posed on channels 6 and 7 by Hall-effect sensing.
azoteq,suspend-mode:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description: |
Specifies the power mode during suspend as follows:
0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
@ -56,11 +55,10 @@ properties:
description: Divides the device's core clock by a factor of 4.
azoteq,ulp-update:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 7
default: 3
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
default: 3
description: Specifies the ultra-low-power mode update rate.
azoteq,reseed-offset:
@ -70,34 +68,30 @@ properties:
reseed events.
azoteq,filt-str-lp-lta:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
Specifies the long-term average filter strength during low-power mode.
azoteq,filt-str-lp-cnt:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
Specifies the raw count filter strength during low-power mode.
azoteq,filt-str-np-lta:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
Specifies the long-term average filter strength during normal-power mode.
azoteq,filt-str-np-cnt:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
Specifies the raw count filter strength during normal-power mode.
@ -156,11 +150,10 @@ properties:
description: Disables all raw count filtering.
azoteq,gpio3-select:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 7
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
default: 0
description:
Selects the channel for which the GPIO3 pin represents touch state.
@ -172,10 +165,9 @@ properties:
in either direction.
azoteq,tx-freq:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description: |
Specifies the inductive sensing excitation frequency as follows (paren-
thesized numbers represent the frequency if 'azoteq,clk-div' is present):
@ -189,10 +181,9 @@ properties:
description: Increases the global capacitance adder from 0.5 pF to 1.5 pF.
azoteq,reseed-select:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description: |
Specifies the event(s) that prompt the device to reseed (i.e. reset the
long-term average) of an associated channel as follows:
@ -208,10 +199,9 @@ properties:
channels.
azoteq,filt-str-slider:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 1
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 1
description: Specifies the slider coordinate filter strength.
patternProperties:
@ -246,27 +236,25 @@ patternProperties:
description: Specifies that the channel participates in slider 1.
azoteq,rx-enable:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
description:
Specifies the CRX pin(s) associated with the channel. By default, only
the CRX pin corresponding to the channel's index is enabled (e.g. CRX0
for channel 0).
azoteq,tx-enable:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
default: [0, 1, 2, 3, 4, 5, 6, 7]
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
default: [0, 1, 2, 3, 4, 5, 6, 7]
description: Specifies the TX pin(s) associated with the channel.
azoteq,meas-cap-decrease:
@ -279,10 +267,9 @@ patternProperties:
description: Floats any inactive CRX pins instead of grounding them.
azoteq,local-cap-size:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
default: 0
description: |
Specifies the capacitance to be added to the channel as follows:
0: None
@ -296,10 +283,9 @@ patternProperties:
deep-touch events relative to their respective thresholds.
azoteq,proj-bias:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 2
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 2
description: |
Specifies the bias current applied during projected-capacitance
sensing as follows:
@ -309,10 +295,9 @@ patternProperties:
3: 20 uA
azoteq,sense-mode:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 9, 14, 15]
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 9, 14, 15]
default: 0
description: |
Specifies the channel's sensing mode as follows:
0: Self capacitance
@ -322,10 +307,9 @@ patternProperties:
15: Temperature
azoteq,sense-freq:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 1
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 1
description: |
Specifies the channel's sensing frequency as follows (parenthesized
numbers represent the frequency if 'azoteq,clk-div' is present):
@ -339,10 +323,9 @@ patternProperties:
description: Enables the static front-end for the channel.
azoteq,ati-mode:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
default: 3
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 3
description: |
Specifies the channel's ATI mode as follows:
0: Disabled
@ -351,39 +334,35 @@ patternProperties:
3: Full
azoteq,ati-base:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [75, 100, 150, 200]
default: 100
$ref: /schemas/types.yaml#/definitions/uint32
enum: [75, 100, 150, 200]
default: 100
description: Specifies the channel's ATI base.
azoteq,ati-target:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- multipleOf: 32
minimum: 0
maximum: 2016
default: 512
$ref: /schemas/types.yaml#/definitions/uint32
multipleOf: 32
minimum: 0
maximum: 2016
default: 512
description: Specifies the channel's ATI target.
azoteq,assoc-select:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
items:
minimum: 0
maximum: 7
description:
Specifies the associated channels for which the channel serves as a
reference channel. By default, no channels are selected.
azoteq,assoc-weight:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 255
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 255
default: 0
description:
Specifies the channel's impact weight if it acts as an associated
channel (0 = 0% impact, 255 = 200% impact).
@ -411,11 +390,10 @@ patternProperties:
properties:
azoteq,thresh:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 255
default: 10
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 255
default: 10
description: Specifies the threshold for the event.
linux,code:
@ -430,19 +408,17 @@ patternProperties:
properties:
azoteq,thresh:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 255
default: 8
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 255
default: 8
description: Specifies the threshold for the event.
azoteq,hyst:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 15
default: 4
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 4
description: Specifies the hysteresis for the event.
linux,code:
@ -457,19 +433,17 @@ patternProperties:
properties:
azoteq,thresh:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 255
default: 26
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 255
default: 26
description: Specifies the threshold for the event.
azoteq,hyst:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 15
default: 0
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 0
description: Specifies the hysteresis for the event.
linux,code:

View File

@ -25,19 +25,17 @@ properties:
description:
u32 value of the base of parent HyperTransport vector allocated
to PCH MSI.
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 255
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 255
loongson,msi-num-vecs:
description:
u32 value of the number of parent HyperTransport vectors allocated
to PCH MSI.
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 1
maximum: 256
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 1
maximum: 256
msi-controller: true

View File

@ -25,10 +25,9 @@ properties:
description:
u32 value of the base of parent HyperTransport vector allocated
to PCH PIC.
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 192
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 192
interrupt-controller: true

View File

@ -31,9 +31,8 @@ properties:
reg-size:
description: The access width of the register in bytes. Defaults to 1.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [1, 2, 4, 8]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4, 8]
reg-spacing:
$ref: /schemas/types.yaml#/definitions/uint32
@ -43,9 +42,8 @@ properties:
description: |
The amount of bits to shift the register content to the right to get
the data into bit zero.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 56
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 56
required:
- compatible

View File

@ -57,8 +57,7 @@ properties:
description: |
mA; per-string current limit.
This property is supported only for WLED3.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
default: 20
minimum: 0
maximum: 25
@ -74,38 +73,33 @@ properties:
qcom,current-boost-limit:
description: |
mA; boost current limit.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
qcom,switching-freq:
description: |
kHz; switching frequency.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
qcom,ovp:
description: |
V; Over-voltage protection limit.
This property is supported only for WLED3.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 27, 29, 32, 35 ]
- default: 29
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 27, 29, 32, 35 ]
default: 29
qcom,ovp-millivolt:
description: |
Over-voltage protection limit. This property is for WLED4 only.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 18100, 19600, 29600, 31100 ]
- default: 29600
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 18100, 19600, 29600, 31100 ]
default: 29600
qcom,num-strings:
description: |
number of led strings attached.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
qcom,enabled-strings:
description: |
@ -113,8 +107,7 @@ properties:
string of leds are operated individually. Specify the
list of strings used by the device. Any combination of
led strings can be used.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
@ -150,10 +143,9 @@ properties:
0 - Modulator A
1 - Modulator B
This property is applicable only to WLED5 peripheral.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 0, 1 ]
- default: 0
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 1 ]
default: 0
qcom,cabc-sel:
description: |
@ -164,9 +156,8 @@ properties:
2 - CABC 2
3 - External signal (e.g. LPG) is used for dimming
This property is applicable only to WLED5 peripheral.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 0, 1, 2, 3 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 1, 2, 3 ]
allOf:
- if:

View File

@ -32,8 +32,7 @@ properties:
patternProperties:
"^led@[0-2]$":
type: object
allOf:
- $ref: common.yaml#
$ref: common.yaml#
properties:
reg:

View File

@ -33,8 +33,7 @@ properties:
led:
type: object
allOf:
- $ref: common.yaml#
$ref: common.yaml#
required:
- compatible

View File

@ -51,7 +51,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>
mailbox: mailbox@400a0000 {
compatible = "sprd,sc9860-mailbox";
reg = <0 0x400a0000 0 0x8000>, <0 0x400a8000 0 0x8000>;
reg = <0x400a0000 0x8000>, <0x400a8000 0x8000>;
#mbox-cells = <1>;
clock-names = "enable";
clocks = <&aon_gate 53>;

View File

@ -79,8 +79,7 @@ properties:
- const: 4
link-frequencies:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint64-array
$ref: /schemas/types.yaml#/definitions/uint64-array
description:
Allowed data bus frequencies. 360000000, 180000000 Hz or both
are supported by the driver.

View File

@ -61,7 +61,7 @@ examples:
vdec: video-codec@ff660000 {
compatible = "rockchip,rk3399-vdec";
reg = <0x0 0xff660000 0x0 0x400>;
reg = <0xff660000 0x400>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
<&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;

View File

@ -66,7 +66,7 @@ examples:
vpu: video-codec@ff9a0000 {
compatible = "rockchip,rk3288-vpu";
reg = <0x0 0xff9a0000 0x0 0x800>;
reg = <0xff9a0000 0x800>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vepu", "vdpu";

View File

@ -45,9 +45,8 @@ patternProperties:
maxItems: 255
ingenic,nemc-bus-width:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [8, 16]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [8, 16]
description: Specifies the bus width in bits.
ingenic,nemc-tAS:

View File

@ -53,7 +53,7 @@ examples:
- |
nfc: nand-controller@ff100000 {
compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
reg = <0x0 0xff100000 0x0 0x1000>;
reg = <0xff100000 0x1000>;
clock-names = "controller", "bus";
clocks = <&clk200>, <&clk100>;
interrupt-parent = <&gic>;

View File

@ -145,8 +145,7 @@ patternProperties:
"^cpts@[0-9a-f]+":
type: object
allOf:
- $ref: "ti,k3-am654-cpts.yaml#"
$ref: "ti,k3-am654-cpts.yaml#"
description:
CPSW Common Platform Time Sync (CPTS) module.

View File

@ -74,15 +74,13 @@ properties:
- const: cpts
ti,cpts-ext-ts-inputs:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 8
description:
Number of hardware timestamp push inputs (HWx_TS_PUSH)
ti,cpts-periodic-outputs:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 8
description:
Number of timestamp Generator function outputs (TS_GENFx)
@ -123,7 +121,7 @@ examples:
cpts@310d0000 {
compatible = "ti,am65-cpts";
reg = <0x0 0x310d0000 0x0 0x400>;
reg = <0x310d0000 0x400>;
reg-names = "cpts";
clocks = <&main_cpts_mux>;
clock-names = "cpts";

View File

@ -15,8 +15,7 @@ allOf:
properties:
cdns,max-outbound-regions:
description: maximum number of outbound regions
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 32
default: 32

View File

@ -16,8 +16,7 @@ allOf:
properties:
cdns,max-outbound-regions:
description: maximum number of outbound regions
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 32
default: 32

View File

@ -29,9 +29,8 @@ properties:
phydev:
description: device ID for programming the ComboPHY.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 31
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 31
required:
- compatible

View File

@ -44,6 +44,8 @@ properties:
"#size-cells":
enum: [ 1, 2 ]
ranges: true
clocks:
minItems: 1
maxItems: 4
@ -87,6 +89,7 @@ required:
- "#clock-cells"
- "#address-cells"
- "#size-cells"
- ranges
- clocks
- clock-names
- resets
@ -281,10 +284,11 @@ examples:
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
usb_2_qmpphy: phy-wrapper@88eb000 {
compatible = "qcom,sdm845-qmp-usb3-uni-phy";
reg = <0 0x088eb000 0 0x18c>;
reg = <0x088eb000 0x18c>;
#clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x088eb000 0x2000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@ -299,11 +303,11 @@ examples:
vdda-phy-supply = <&vdda_usb2_ss_1p2>;
vdda-pll-supply = <&vdda_usb2_ss_core>;
usb_2_ssphy: phy@88eb200 {
reg = <0 0x088eb200 0 0x128>,
<0 0x088eb400 0 0x1fc>,
<0 0x088eb800 0 0x218>,
<0 0x088eb600 0 0x70>;
usb_2_ssphy: phy@200 {
reg = <0x200 0x128>,
<0x400 0x1fc>,
<0x800 0x218>,
<0x600 0x70>;
#clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;

View File

@ -34,6 +34,8 @@ properties:
"#size-cells":
enum: [ 1, 2 ]
ranges: true
clocks:
items:
- description: Phy aux clock.
@ -86,6 +88,7 @@ required:
- "#clock-cells"
- "#address-cells"
- "#size-cells"
- ranges
- clocks
- clock-names
- resets
@ -100,12 +103,13 @@ examples:
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
usb_1_qmpphy: phy-wrapper@88e9000 {
compatible = "qcom,sdm845-qmp-usb3-phy";
reg = <0 0x088e9000 0 0x18c>,
<0 0x088e8000 0 0x10>;
reg = <0x088e9000 0x18c>,
<0x088e8000 0x10>;
reg-names = "reg-base", "dp_com";
#clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x088e9000 0x1000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@ -120,17 +124,17 @@ examples:
vdda-phy-supply = <&vdda_usb2_ss_1p2>;
vdda-pll-supply = <&vdda_usb2_ss_core>;
usb_1_ssphy: phy@88e9200 {
reg = <0 0x088e9200 0 0x128>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
<0 0x088e9600 0 0x128>,
<0 0x088e9800 0 0x200>,
<0 0x088e9a00 0 0x100>;
#clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
phy@200 {
reg = <0x200 0x128>,
<0x400 0x200>,
<0xc00 0x218>,
<0x600 0x128>,
<0x800 0x200>,
<0xa00 0x100>;
#clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
};

View File

@ -65,7 +65,7 @@ examples:
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
phy@88e2000 {
compatible = "qcom,sm8150-usb-hs-phy";
reg = <0 0x088e2000 0 0x400>;
reg = <0x088e2000 0x400>;
#phy-cells = <0>;
clocks = <&rpmhcc RPMH_CXO_CLK>;

View File

@ -52,9 +52,8 @@ properties:
description: |
Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
exist means disabling the ssc. The actual value will be -<value> ppm.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 0, 4003, 4492, 4980 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 4003, 4492, 4980 ]
required:
- compatible

View File

@ -27,11 +27,9 @@ properties:
of this binary blob is kept secret by CellWise. The only way to obtain
it is to mail two batteries to a test facility of CellWise and receive
back a test report with the binary blob.
allOf:
- $ref: /schemas/types.yaml#definitions/uint8-array
items:
- minItems: 64
maxItems: 64
$ref: /schemas/types.yaml#definitions/uint8-array
minItems: 64
maxItems: 64
cellwise,monitor-interval-ms:
description:
@ -41,10 +39,9 @@ properties:
power-supplies:
description:
Specifies supplies used for charging the battery connected to this gauge
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- minItems: 1
maxItems: 8 # Should be enough
$ref: /schemas/types.yaml#/definitions/phandle-array
minItems: 1
maxItems: 8 # Should be enough
monitored-battery:
description:

View File

@ -32,16 +32,14 @@ properties:
description:
The number of times to retry I2C transactions on I2C IO failure.
default: 0
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
sbs,poll-retry-count:
description:
The number of times to try looking for new status after an external
change notification.
default: 0
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
sbs,battery-detect-gpios:
description:

View File

@ -30,13 +30,11 @@ properties:
items:
- description: SoC PWM ipg clock
- description: SoC PWM per clock
maxItems: 2
clock-names:
items:
- const: ipg
- const: per
maxItems: 2
interrupts:
maxItems: 1

View File

@ -21,8 +21,7 @@ properties:
regulators:
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
description: |
list of regulators provided by this controller, must be named
after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST
@ -30,13 +29,11 @@ properties:
patternProperties:
"^LDO([1-9]|1[0-5])$":
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
"^BUCK|BUCKBOOST$":
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
additionalProperties: false

View File

@ -29,8 +29,7 @@ description: |
patternProperties:
"^LDO[1-6]$":
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
description:
Properties for single LDO regulator.
@ -44,8 +43,7 @@ patternProperties:
"^BUCK[1-6]$":
type: object
allOf:
- $ref: regulator.yaml#
$ref: regulator.yaml#
description:
Properties for single BUCK regulator.
@ -56,28 +54,25 @@ patternProperties:
should be "buck1", ..., "buck6"
rohm,dvs-run-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 1300000
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 1300000
description:
PMIC default "RUN" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-idle-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 1300000
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 1300000
description:
PMIC default "IDLE" state voltage in uV. See below table for
bucks which support this. 0 means disabled.
rohm,dvs-suspend-voltage:
allOf:
- $ref: "/schemas/types.yaml#/definitions/uint32"
- minimum: 0
maximum: 1300000
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 1300000
description:
PMIC default "SUSPEND" state voltage in uV. See below table for
bucks which support this. 0 means disabled.

View File

@ -28,10 +28,8 @@ properties:
description:
Arm TrustZone CryptoCell TRNG engine has 4 ring oscillators.
Sampling ratio values for these 4 ring oscillators. (from calibration)
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
maxItems: 4
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 4
clocks:
maxItems: 1

View File

@ -33,9 +33,8 @@ properties:
description: |
The size (in bytes) of the IO accesses that should be performed
on the device.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 1, 4 ]
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 1, 4 ]
clocks:
minItems: 2

View File

@ -100,8 +100,7 @@ patternProperties:
supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol
variants.
allOf:
- $ref: /spi/spi-controller.yaml#
$ref: /spi/spi-controller.yaml#
properties:
compatible:
@ -126,8 +125,7 @@ patternProperties:
"i2c@[0-9a-f]+$":
type: object
description: GENI serial engine based I2C controller.
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
$ref: /schemas/i2c/i2c-controller.yaml#
properties:
compatible:
@ -156,8 +154,7 @@ patternProperties:
"serial@[0-9a-f]+$":
type: object
description: GENI Serial Engine based UART Controller.
allOf:
- $ref: /schemas/serial.yaml#
$ref: /schemas/serial.yaml#
properties:
compatible:

View File

@ -45,23 +45,20 @@ properties:
- const: ctx3_tx
firmware-name:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
- const: imx/easrc/easrc-imx8mn.bin
$ref: /schemas/types.yaml#/definitions/string
const: imx/easrc/easrc-imx8mn.bin
description: The coefficient table for the filters
fsl,asrc-rate:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 8000
- maximum: 192000
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 8000
maximum: 192000
description: Defines a mutual sample rate used by DPCM Back Ends
fsl,asrc-format:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [2, 6, 10, 32, 36]
default: 2
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 6, 10, 32, 36]
default: 2
description:
Defines a mutual sample format used by DPCM Back Ends
@ -83,7 +80,7 @@ examples:
easrc: easrc@300c0000 {
compatible = "fsl,imx8mn-easrc";
reg = <0x0 0x300c0000 0x0 0x10000>;
reg = <0x300c0000 0x10000>;
interrupts = <0x0 122 0x4>;
clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
clock-names = "mem";

View File

@ -13,15 +13,13 @@ definitions:
frame-master:
description: Indicates dai-link frame master.
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- maxItems: 1
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
bitclock-master:
description: Indicates dai-link bit clock master
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- maxItems: 1
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
frame-inversion:
description: dai-link uses frame clock inversion

View File

@ -76,13 +76,12 @@ properties:
PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 4
items:
maximum: 1
default: [0, 0, 0, 0]
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
items:
maximum: 1
default: [0, 0, 0, 0]
ti,gpi-config:
description: |
@ -102,13 +101,12 @@ properties:
7 - GPIX is configured as a PDM data input for channel 7 and channel
(PDMDIN4)
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- minItems: 1
maxItems: 4
items:
maximum: 7
default: [0, 0, 0, 0]
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
items:
maximum: 7
default: [0, 0, 0, 0]
required:
- compatible

View File

@ -28,9 +28,8 @@ properties:
const: 0
socionext,tmod-calibration:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- maxItems: 2
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 2
description:
A pair of calibrated values referred from PVT, in case that the values
aren't set on SoC, like a reference board.

View File

@ -52,21 +52,18 @@ properties:
vhub-vendor-id:
description: vhub Vendor ID
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 65535
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 65535
vhub-product-id:
description: vhub Product ID
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 65535
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 65535
vhub-device-revision:
description: vhub Device Revision in binary-coded decimal
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 65535
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 65535
vhub-strings:
type: object
@ -90,18 +87,15 @@ properties:
manufacturer:
description: vhub manufacturer
allOf:
- $ref: /schemas/types.yaml#/definitions/string
$ref: /schemas/types.yaml#/definitions/string
product:
description: vhub product name
allOf:
- $ref: /schemas/types.yaml#/definitions/string
$ref: /schemas/types.yaml#/definitions/string
serial-number:
description: vhub device serial number
allOf:
- $ref: /schemas/types.yaml#/definitions/string
$ref: /schemas/types.yaml#/definitions/string
required:
- compatible

View File

@ -64,13 +64,11 @@ properties:
- const: hs_src
power-domains:
maxItems: 2
items:
- description: XUSBB(device) power-domain
- description: XUSBA(superspeed) power-domain
power-domain-names:
maxItems: 2
items:
- const: dev
- const: ss

View File

@ -17,8 +17,7 @@ properties:
enum:
- arm,smc-wdt
arm,smc-id:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
The ATF smc function id used by the firmware.
Defaults to 0x82003D06 if unset.

View File

@ -20,6 +20,9 @@ endif
HOST_EXTRACFLAGS += -DNO_YAML
else
dtc-objs += yamltree.o
# To include <yaml.h> installed in a non-default path
HOSTCFLAGS_yamltree.o := $(shell pkg-config --cflags yaml-0.1)
# To link libyaml installed in a non-default path
HOSTLDLIBS_dtc := $(shell pkg-config yaml-0.1 --libs)
endif