drm/vmwgfx: Add gui_x/y to vmw_connector_state

As gui_x/y positioning is display unit is protected by
requested_layout_mutex adding vmw_connector_state copy of the same and
modeset commit will refer the state copy to sync with modeset_check
state.

v2: Tested with CONFIG_PROVE_LOCKING enabled.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
This commit is contained in:
Deepak Rawat 2018-06-20 11:34:26 +02:00 committed by Thomas Hellstrom
parent b89e5ff9ee
commit 3e79ecdad8
4 changed files with 87 additions and 37 deletions

View File

@ -1609,26 +1609,43 @@ static int vmw_kms_check_topology(struct drm_device *dev,
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state,
new_crtc_state, i) {
struct vmw_display_unit *du = vmw_crtc_to_du(crtc);
struct drm_connector *connector;
struct drm_connector_state *conn_state;
struct vmw_connector_state *vmw_conn_state;
if (!new_crtc_state->enable && old_crtc_state->enable) {
rects[i].x1 = 0;
rects[i].y1 = 0;
rects[i].x2 = 0;
rects[i].y2 = 0;
continue;
}
if (new_crtc_state->enable) {
/* If display unit is not active cannot enable CRTC */
if (!du->pref_active) {
ret = -EINVAL;
goto clean;
}
rects[i].x1 = du->gui_x;
rects[i].y1 = du->gui_y;
rects[i].x2 = du->gui_x + new_crtc_state->mode.hdisplay;
rects[i].y2 = du->gui_y + new_crtc_state->mode.vdisplay;
if (!du->pref_active) {
ret = -EINVAL;
goto clean;
}
/*
* For vmwgfx each crtc has only one connector attached and it
* is not changed so don't really need to check the
* crtc->connector_mask and iterate over it.
*/
connector = &du->connector;
conn_state = drm_atomic_get_connector_state(state, connector);
if (IS_ERR(conn_state)) {
ret = PTR_ERR(conn_state);
goto clean;
}
vmw_conn_state = vmw_connector_state_to_vcs(conn_state);
vmw_conn_state->gui_x = du->gui_x;
vmw_conn_state->gui_y = du->gui_y;
rects[i].x1 = du->gui_x;
rects[i].y1 = du->gui_y;
rects[i].x2 = du->gui_x + new_crtc_state->mode.hdisplay;
rects[i].y2 = du->gui_y + new_crtc_state->mode.vdisplay;
}
ret = vmw_kms_check_display_memory(dev, dev->mode_config.num_crtc,

View File

@ -192,6 +192,24 @@ struct vmw_connector_state {
struct drm_connector_state base;
bool is_implicit;
/**
* @gui_x:
*
* vmwgfx connector property representing the x position of this display
* unit (connector is synonymous to display unit) in overall topology.
* This is what the device expect as xRoot while creating screen.
*/
int gui_x;
/**
* @gui_y:
*
* vmwgfx connector property representing the y position of this display
* unit (connector is synonymous to display unit) in overall topology.
* This is what the device expect as yRoot while creating screen.
*/
int gui_y;
};
/**

View File

@ -109,7 +109,7 @@ static void vmw_sou_crtc_destroy(struct drm_crtc *crtc)
*/
static int vmw_sou_fifo_create(struct vmw_private *dev_priv,
struct vmw_screen_object_unit *sou,
uint32_t x, uint32_t y,
int x, int y,
struct drm_display_mode *mode)
{
size_t fifo_size;
@ -139,13 +139,8 @@ static int vmw_sou_fifo_create(struct vmw_private *dev_priv,
(sou->base.unit == 0 ? SVGA_SCREEN_IS_PRIMARY : 0);
cmd->obj.size.width = mode->hdisplay;
cmd->obj.size.height = mode->vdisplay;
if (sou->base.is_implicit) {
cmd->obj.root.x = x;
cmd->obj.root.y = y;
} else {
cmd->obj.root.x = sou->base.gui_x;
cmd->obj.root.y = sou->base.gui_y;
}
cmd->obj.root.x = x;
cmd->obj.root.y = y;
sou->base.set_gui_x = cmd->obj.root.x;
sou->base.set_gui_y = cmd->obj.root.y;
@ -222,12 +217,11 @@ static void vmw_sou_crtc_mode_set_nofb(struct drm_crtc *crtc)
struct vmw_plane_state *vps;
int ret;
sou = vmw_crtc_to_sou(crtc);
sou = vmw_crtc_to_sou(crtc);
dev_priv = vmw_priv(crtc->dev);
ps = crtc->primary->state;
fb = ps->fb;
vps = vmw_plane_state_to_vps(ps);
ps = crtc->primary->state;
fb = ps->fb;
vps = vmw_plane_state_to_vps(ps);
vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
@ -240,11 +234,25 @@ static void vmw_sou_crtc_mode_set_nofb(struct drm_crtc *crtc)
}
if (vfb) {
struct drm_connector_state *conn_state;
struct vmw_connector_state *vmw_conn_state;
int x, y;
sou->buffer = vps->bo;
sou->buffer_size = vps->bo_size;
ret = vmw_sou_fifo_create(dev_priv, sou, crtc->x, crtc->y,
&crtc->mode);
if (sou->base.is_implicit) {
x = crtc->x;
y = crtc->y;
} else {
conn_state = sou->base.connector.state;
vmw_conn_state = vmw_connector_state_to_vcs(conn_state);
x = vmw_conn_state->gui_x;
y = vmw_conn_state->gui_y;
}
ret = vmw_sou_fifo_create(dev_priv, sou, x, y, &crtc->mode);
if (ret)
DRM_ERROR("Failed to define Screen Object %dx%d\n",
crtc->x, crtc->y);

View File

@ -178,13 +178,9 @@ static int vmw_stdu_define_st(struct vmw_private *dev_priv,
cmd->body.height = mode->vdisplay;
cmd->body.flags = (0 == cmd->body.stid) ? SVGA_STFLAG_PRIMARY : 0;
cmd->body.dpi = 0;
if (stdu->base.is_implicit) {
cmd->body.xRoot = crtc_x;
cmd->body.yRoot = crtc_y;
} else {
cmd->body.xRoot = stdu->base.gui_x;
cmd->body.yRoot = stdu->base.gui_y;
}
cmd->body.xRoot = crtc_x;
cmd->body.yRoot = crtc_y;
stdu->base.set_gui_x = cmd->body.xRoot;
stdu->base.set_gui_y = cmd->body.yRoot;
@ -374,11 +370,14 @@ static void vmw_stdu_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct vmw_private *dev_priv;
struct vmw_screen_target_display_unit *stdu;
int ret;
struct drm_connector_state *conn_state;
struct vmw_connector_state *vmw_conn_state;
int x, y, ret;
stdu = vmw_crtc_to_stdu(crtc);
stdu = vmw_crtc_to_stdu(crtc);
dev_priv = vmw_priv(crtc->dev);
conn_state = stdu->base.connector.state;
vmw_conn_state = vmw_connector_state_to_vcs(conn_state);
if (stdu->defined) {
ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
@ -397,8 +396,16 @@ static void vmw_stdu_crtc_mode_set_nofb(struct drm_crtc *crtc)
if (!crtc->state->enable)
return;
if (stdu->base.is_implicit) {
x = crtc->x;
y = crtc->y;
} else {
x = vmw_conn_state->gui_x;
y = vmw_conn_state->gui_y;
}
vmw_svga_enable(dev_priv);
ret = vmw_stdu_define_st(dev_priv, stdu, &crtc->mode, crtc->x, crtc->y);
ret = vmw_stdu_define_st(dev_priv, stdu, &crtc->mode, x, y);
if (ret)
DRM_ERROR("Failed to define Screen Target of size %dx%d\n",