ixgbe: Correct X550EM_x revision check

The X550EM_x revision check needs to check a value, not just a bit.
Use a mask and check the value. Also remove the redundant check
inside the ixgbe_enter_lplu_t_x550em, because it can only be called
when both the mac type and revision check pass.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit is contained in:
Mark Rustad 2015-11-20 13:12:17 -08:00 committed by Jeff Kirsher
parent e9ee3238f8
commit 3ca2b2506e
2 changed files with 4 additions and 7 deletions

View File

@ -3520,7 +3520,7 @@ struct ixgbe_info {
#define IXGBE_FUSES0_GROUP(_i) (0x11158 + ((_i) * 4))
#define IXGBE_FUSES0_300MHZ BIT(5)
#define IXGBE_FUSES0_REV1 BIT(6)
#define IXGBE_FUSES0_REV_MASK (3 << 6)
#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010)
#define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C)

View File

@ -1857,10 +1857,6 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
u32 save_autoneg;
bool link_up;
/* SW LPLU not required on later HW revisions. */
if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))
return 0;
/* If blocked by MNG FW, then don't restart AN */
if (ixgbe_check_reset_blocked(hw))
return 0;
@ -2000,8 +1996,9 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
ixgbe_setup_internal_phy_t_x550em;
/* setup SW LPLU only for first revision */
if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw,
IXGBE_FUSES0_GROUP(0))))
if (hw->mac.type == ixgbe_mac_X550EM_x &&
!(IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)) &
IXGBE_FUSES0_REV_MASK))
phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;