Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-15 00:21:59 +00:00
Code Issues Packages Projects Releases Wiki Activity

[SCSI] untangle scsi_prep_fn

Browse Source 
I wanted to add some BUG checks to scsi_prep_fn to make sure no one
sends us a non-sg command, but this function is a horrible mess.

So I decided to detangle the function and document what the valid
cases are.  While doing that I found that REQ_TYPE_SPECIAL commands
aren't used by the SCSI layer anymore and we can get rid of the code
handling them.

The new structure of scsi_prep_fn is:

 (1) check if we're allowed to send this command
 (2) big switch on cmd_type.  For the two valid types call into
     a function to set the command up, else error
 (3) code to handle error cases

Because FS and BLOCK_PC commands are handled entirely separate after
the patch this introduces a tiny amount of code duplication.  This
improves readabiulity though and will help to avoid the bidi command
overhead for FS commands so it's a good thing.

I've tested this on both sata and mptsas.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
Christoph Hellwig 2006-11-04 20:10:55 +01:00 committed by James Bottomley
parent 2dc611de5a
commit 3b00315799
1 changed files with 169 additions and 150 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

319
drivers/scsi/scsi_lib.c
View File

@ -995,25 +995,14 @@ static int scsi_init_io(struct scsi_cmnd *cmd)
int count;
/*
* if this is a rq->data based REQ_BLOCK_PC, setup for a non-sg xfer
*/
if (blk_pc_request(req) && !req->bio) {
cmd->request_bufflen = req->data_len;
cmd->request_buffer = req->data;
req->buffer = req->data;
cmd->use_sg = 0;
return 0;
}
/*
* we used to not use scatter-gather for single segment request,
* We used to not use scatter-gather for single segment request,
* but now we do (it makes highmem I/O easier to support without
* kmapping pages)
*/
cmd->use_sg = req->nr_phys_segments;
/*
* if sg table allocation fails, requeue request later.
* If sg table allocation fails, requeue request later.
*/
sgpnt = scsi_alloc_sgtable(cmd, GFP_ATOMIC);
if (unlikely(!sgpnt)) {
@ -1021,24 +1010,21 @@ static int scsi_init_io(struct scsi_cmnd *cmd)
return BLKPREP_DEFER;
}
req->buffer = NULL;
cmd->request_buffer = (char *) sgpnt;
cmd->request_bufflen = req->nr_sectors << 9;
if (blk_pc_request(req))
cmd->request_bufflen = req->data_len;
req->buffer = NULL;
else
cmd->request_bufflen = req->nr_sectors << 9;
/*
* Next, walk the list, and fill in the addresses and sizes of
* each segment.
*/
count = blk_rq_map_sg(req->q, req, cmd->request_buffer);
/*
* mapped well, send it off
*/
if (likely(count <= cmd->use_sg)) {
cmd->use_sg = count;
return 0;
return BLKPREP_OK;
}
printk(KERN_ERR "Incorrect number of segments after building list\n");
@ -1068,6 +1054,27 @@ static int scsi_issue_flush_fn(request_queue_t *q, struct gendisk *disk,
return -EOPNOTSUPP;
}
static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
struct request *req)
{
struct scsi_cmnd *cmd;
if (!req->special) {
cmd = scsi_get_command(sdev, GFP_ATOMIC);
if (unlikely(!cmd))
return NULL;
req->special = cmd;
} else {
cmd = req->special;
}
/* pull a tag out of the request if we have one */
cmd->tag = req->tag;
cmd->request = req;
return cmd;
}
static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
{
BUG_ON(!blk_pc_request(cmd->request));
@ -1080,9 +1087,37 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
scsi_io_completion(cmd, cmd->request_bufflen);
}
static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
{
struct request *req = cmd->request;
struct scsi_cmnd *cmd;
cmd = scsi_get_cmd_from_req(sdev, req);
if (unlikely(!cmd))
return BLKPREP_DEFER;
/*
* BLOCK_PC requests may transfer data, in which case they must
* a bio attached to them. Or they might contain a SCSI command
* that does not transfer data, in which case they may optionally
* submit a request without an attached bio.
*/
if (req->bio) {
int ret;
BUG_ON(!req->nr_phys_segments);
ret = scsi_init_io(cmd);
if (unlikely(ret))
return ret;
} else {
BUG_ON(req->data_len);
BUG_ON(req->data);
cmd->request_bufflen = 0;
cmd->request_buffer = NULL;
cmd->use_sg = 0;
req->buffer = NULL;
}
BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd));
memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
@ -1098,154 +1133,138 @@ static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
cmd->allowed = req->retries;
cmd->timeout_per_command = req->timeout;
cmd->done = scsi_blk_pc_done;
return BLKPREP_OK;
}
/*
* Setup a REQ_TYPE_FS command. These are simple read/write request
* from filesystems that still need to be translated to SCSI CDBs from
* the ULD.
*/
static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
{
struct scsi_cmnd *cmd;
struct scsi_driver *drv;
int ret;
/*
* Filesystem requests must transfer data.
*/
BUG_ON(!req->nr_phys_segments);
cmd = scsi_get_cmd_from_req(sdev, req);
if (unlikely(!cmd))
return BLKPREP_DEFER;
ret = scsi_init_io(cmd);
if (unlikely(ret))
return ret;
/*
* Initialize the actual SCSI command for this request.
*/
drv = *(struct scsi_driver **)req->rq_disk->private_data;
if (unlikely(!drv->init_command(cmd))) {
scsi_release_buffers(cmd);
scsi_put_command(cmd);
return BLKPREP_KILL;
}
return BLKPREP_OK;
}
static int scsi_prep_fn(struct request_queue *q, struct request *req)
{
struct scsi_device *sdev = q->queuedata;
struct scsi_cmnd *cmd;
int specials_only = 0;
int ret = BLKPREP_OK;
/*
* Just check to see if the device is online. If it isn't, we
* refuse to process any commands. The device must be brought
* online before trying any recovery commands
* If the device is not in running state we will reject some
* or all commands.
*/
if (unlikely(!scsi_device_online(sdev))) {
sdev_printk(KERN_ERR, sdev,
"rejecting I/O to offline device\n");
goto kill;
}
if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
/* OK, we're not in a running state don't prep
* user commands */
if (sdev->sdev_state == SDEV_DEL) {
/* Device is fully deleted, no commands
* at all allowed down */
switch (sdev->sdev_state) {
case SDEV_OFFLINE:
/*
* If the device is offline we refuse to process any
* commands. The device must be brought online
* before trying any recovery commands.
*/
sdev_printk(KERN_ERR, sdev,
"rejecting I/O to offline device\n");
ret = BLKPREP_KILL;
break;
case SDEV_DEL:
/*
* If the device is fully deleted, we refuse to
* process any commands as well.
*/
sdev_printk(KERN_ERR, sdev,
"rejecting I/O to dead device\n");
goto kill;
ret = BLKPREP_KILL;
break;
case SDEV_QUIESCE:
case SDEV_BLOCK:
/*
* If the devices is blocked we defer normal commands.
*/
if (!(req->cmd_flags & REQ_PREEMPT))
ret = BLKPREP_DEFER;
break;
default:
/*
* For any other not fully online state we only allow
* special commands. In particular any user initiated
* command is not allowed.
*/
if (!(req->cmd_flags & REQ_PREEMPT))
ret = BLKPREP_KILL;
break;
}
/* OK, we only allow special commands (i.e. not
* user initiated ones */
specials_only = sdev->sdev_state;
if (ret != BLKPREP_OK)
goto out;
}
/*
* Find the actual device driver associated with this command.
* The SPECIAL requests are things like character device or
* ioctls, which did not originate from ll_rw_blk. Note that
* the special field is also used to indicate the cmd for
* the remainder of a partially fulfilled request that can
* come up when there is a medium error. We have to treat
* these two cases differently. We differentiate by looking
* at request->cmd, as this tells us the real story.
*/
if (blk_special_request(req) && req->special)
cmd = req->special;
else if (blk_pc_request(req) || blk_fs_request(req)) {
if (unlikely(specials_only) && !(req->cmd_flags & REQ_PREEMPT)){
if (specials_only == SDEV_QUIESCE ||
specials_only == SDEV_BLOCK)
goto defer;
sdev_printk(KERN_ERR, sdev,
"rejecting I/O to device being removed\n");
goto kill;
}
switch (req->cmd_type) {
case REQ_TYPE_BLOCK_PC:
ret = scsi_setup_blk_pc_cmnd(sdev, req);
break;
case REQ_TYPE_FS:
ret = scsi_setup_fs_cmnd(sdev, req);
break;
default:
/*
* Now try and find a command block that we can use.
*/
if (!req->special) {
cmd = scsi_get_command(sdev, GFP_ATOMIC);
if (unlikely(!cmd))
goto defer;
} else
cmd = req->special;
/* pull a tag out of the request if we have one */
cmd->tag = req->tag;
} else {
blk_dump_rq_flags(req, "SCSI bad req");
goto kill;
}
/* note the overloading of req->special. When the tag
* is active it always means cmd. If the tag goes
* back for re-queueing, it may be reset */
req->special = cmd;
cmd->request = req;
/*
* FIXME: drop the lock here because the functions below
* expect to be called without the queue lock held. Also,
* previously, we dequeued the request before dropping the
* lock. We hope REQ_STARTED prevents anything untoward from
* happening now.
*/
if (blk_fs_request(req) || blk_pc_request(req)) {
int ret;
/*
* This will do a couple of things:
* 1) Fill in the actual SCSI command.
* 2) Fill in any other upper-level specific fields
* (timeout).
* All other command types are not supported.
*
* If this returns 0, it means that the request failed
* (reading past end of disk, reading offline device,
* etc). This won't actually talk to the device, but
* some kinds of consistency checking may cause the
* request to be rejected immediately.
* Note that these days the SCSI subsystem does not use
* REQ_TYPE_SPECIAL requests anymore. These are only used
* (directly or via blk_insert_request) by non-SCSI drivers.
*/
/*
* This sets up the scatter-gather table (allocating if
* required).
*/
ret = scsi_init_io(cmd);
switch(ret) {
/* For BLKPREP_KILL/DEFER the cmd was released */
case BLKPREP_KILL:
goto kill;
case BLKPREP_DEFER:
goto defer;
}
/*
* Initialize the actual SCSI command for this request.
*/
if (blk_pc_request(req)) {
scsi_setup_blk_pc_cmnd(cmd);
} else if (req->rq_disk) {
struct scsi_driver *drv;
drv = *(struct scsi_driver **)req->rq_disk->private_data;
if (unlikely(!drv->init_command(cmd))) {
scsi_release_buffers(cmd);
scsi_put_command(cmd);
goto kill;
}
}
blk_dump_rq_flags(req, "SCSI bad req");
ret = BLKPREP_KILL;
break;
}
/*
* The request is now prepped, no need to come back here
*/
req->cmd_flags |= REQ_DONTPREP;
return BLKPREP_OK;
out:
switch (ret) {
case BLKPREP_KILL:
req->errors = DID_NO_CONNECT << 16;
break;
case BLKPREP_DEFER:
/*
* If we defer, the elv_next_request() returns NULL, but the
* queue must be restarted, so we plug here if no returning
* command will automatically do that.
*/
if (sdev->device_busy == 0)
blk_plug_device(q);
break;
default:
req->cmd_flags |= REQ_DONTPREP;
}
defer:
/* If we defer, the elv_next_request() returns NULL, but the
* queue must be restarted, so we plug here if no returning
* command will automatically do that. */
if (sdev->device_busy == 0)
blk_plug_device(q);
return BLKPREP_DEFER;
kill:
req->errors = DID_NO_CONNECT << 16;
return BLKPREP_KILL;
return ret;
}
/*