net/smsc911x: Add minimal runtime PM support

Add minimal runtime PM support (enable on probe, disable on remove), to
ensure proper operation with a parent device that uses runtime PM.

This is needed on systems where the external bus controller module of
the SoC is contained in a PM domain and/or has a gateable functional
clock. In such cases, before accessing any device connected to the
external bus, the PM domain must be powered up, and/or the functional
clock must be enabled, which is typically handled through runtime PM by
the bus controller driver.

An example of this is the kzm9g development board, where an smsc9220
Ethernet controller is connected to the Bus State Controller (BSC) of a
Renesas sh73a0 SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Geert Uytterhoeven 2014-11-24 19:58:17 +01:00 committed by David S. Miller
parent 4f0372150b
commit 3a611e26e9

View File

@ -59,6 +59,8 @@
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/of_net.h>
#include <linux/pm_runtime.h>
#include "smsc911x.h"
#define SMSC_CHIPNAME "smsc911x"
@ -2338,6 +2340,9 @@ static int smsc911x_drv_remove(struct platform_device *pdev)
free_netdev(dev);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
@ -2491,6 +2496,9 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
if (pdata->config.shift)
pdata->ops = &shifted_smsc911x_ops;
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
retval = smsc911x_init(dev);
if (retval < 0)
goto out_disable_resources;
@ -2572,6 +2580,8 @@ out_unregister_netdev_5:
out_free_irq:
free_irq(dev->irq, dev);
out_disable_resources:
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
(void)smsc911x_disable_resources(pdev);
out_enable_resources_fail:
smsc911x_free_resources(pdev);