Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-09-20 15:03:04 +00:00
Code Issues Packages Projects Releases Wiki Activity

mtd: rawnand: Ensure ECC configuration is propagated to upper layers

Browse Source 
Until recently the "upper layer" was MTD. But following incremental
reworks to bring spi-nand support and more recently generic ECC support,
there is now an intermediate "generic NAND" layer that also needs to get
access to some values. When using "converted" ECC engines, like the
software ones, these values are already propagated correctly. But
otherwise when using good old raw NAND controller drivers, we need to
manually set these values ourselves at the end of the "scan" operation,
once these values have been negotiated.

Without this propagation, later (generic) checks like the one warning
users that the ECC strength is not high enough might simply no longer
work.

Fixes: 8c126720fe ("mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper")
Cc: stable@vger.kernel.org
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Closes: https://lore.kernel.org/all/Zhe2JtvvN1M4Ompw@pengutronix.de/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/linux-mtd/20240507085842.108844-1-miquel.raynal@bootlin.com
This commit is contained in:
Miquel Raynal 2024-05-07 10:58:42 +02:00
parent 1613e604df
commit 3a1b777eb9
1 changed files with 8 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/mtd/nand/raw/nand_base.c
View File

@ -6301,6 +6301,7 @@ static const struct nand_ops rawnand_ops = {
static int nand_scan_tail(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_device *base = &chip->base;
struct nand_ecc_ctrl *ecc = &chip->ecc;
int ret, i;
@ -6445,9 +6446,13 @@ static int nand_scan_tail(struct nand_chip *chip)
if (!ecc->write_oob_raw)
ecc->write_oob_raw = ecc->write_oob;
/* propagate ecc info to mtd_info */
/* Propagate ECC info to the generic NAND and MTD layers */
mtd->ecc_strength = ecc->strength;
if (!base->ecc.ctx.conf.strength)
base->ecc.ctx.conf.strength = ecc->strength;
mtd->ecc_step_size = ecc->size;
if (!base->ecc.ctx.conf.step_size)
base->ecc.ctx.conf.step_size = ecc->size;
/*
* Set the number of read / write steps for one page depending on ECC
@ -6455,6 +6460,8 @@ static int nand_scan_tail(struct nand_chip *chip)
*/
if (!ecc->steps)
ecc->steps = mtd->writesize / ecc->size;
if (!base->ecc.ctx.nsteps)
base->ecc.ctx.nsteps = ecc->steps;
if (ecc->steps * ecc->size != mtd->writesize) {
WARN(1, "Invalid ECC parameters\n");
ret = -EINVAL;