Merge 3.18-rc4 into tty-next.

This resolves a merge issue with drivers/tty/serial/8250/8250_mtk.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2014-11-10 12:42:04 +09:00
commit 394e849b83
203 changed files with 1530 additions and 1469 deletions

View File

@ -7,7 +7,10 @@ Required properties:
- "renesas,thermal-r8a73a4" (R-Mobile AP6)
- "renesas,thermal-r8a7779" (R-Car H1)
- "renesas,thermal-r8a7790" (R-Car H2)
- "renesas,thermal-r8a7791" (R-Car M2)
- "renesas,thermal-r8a7791" (R-Car M2-W)
- "renesas,thermal-r8a7792" (R-Car V2H)
- "renesas,thermal-r8a7793" (R-Car M2-N)
- "renesas,thermal-r8a7794" (R-Car E2)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".

View File

@ -3621,7 +3621,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
usb-storage.delay_use=
[UMS] The delay in seconds before a new device is
scanned for Logical Units (default 5).
scanned for Logical Units (default 1).
usb-storage.quirks=
[UMS] A list of quirks entries to supplement or

View File

@ -221,12 +221,11 @@ ccs_out_mode: specify the allowed video output crop/compose/scaling combination
key, not quality.
multiplanar: select whether each device instance supports multi-planar formats,
and thus the V4L2 multi-planar API. By default the first device instance
is single-planar, the second multi-planar, and it keeps alternating.
and thus the V4L2 multi-planar API. By default device instances are
single-planar.
This module option can override that for each instance. Values are:
0: use alternating single and multi-planar devices.
1: this is a single-planar instance.
2: this is a multi-planar instance.
@ -975,9 +974,8 @@ is set, then the alpha component is only used for the color red and set to
0 otherwise.
The driver has to be configured to support the multiplanar formats. By default
the first driver instance is single-planar, the second is multi-planar, and it
keeps alternating. This can be changed by setting the multiplanar module option,
see section 1 for more details on that option.
the driver instances are single-planar. This can be changed by setting the
multiplanar module option, see section 1 for more details on that option.
If the driver instance is using the multiplanar formats/API, then the first
single planar format (YUYV) and the multiplanar NV16M and NV61M formats the
@ -1021,7 +1019,7 @@ the output overlay for the video output, turn on video looping and capture
to see the blended framebuffer overlay that's being written to by the second
instance. This setup would require the following commands:
$ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1
$ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
$ v4l2-ctl -d1 --find-fb
/dev/fb1 is the framebuffer associated with base address 0x12800000
$ sudo v4l2-ctl -d2 --set-fbuf fb=1

View File

@ -1543,6 +1543,7 @@ F: arch/arm/mach-pxa/include/mach/z2.h
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
R: Sören Brinkmann <soren.brinkmann@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://wiki.xilinx.com
T: git git://git.xilinx.com/linux-xlnx.git
@ -2071,8 +2072,9 @@ F: drivers/clocksource/bcm_kona_timer.c
BROADCOM BCM2835 ARM ARCHITECTURE
M: Stephen Warren <swarren@wwwdotorg.org>
M: Lee Jones <lee@kernel.org>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
S: Maintained
N: bcm2835
@ -7179,6 +7181,7 @@ F: drivers/crypto/picoxcell*
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/pinctrl/
F: include/linux/pinctrl/
@ -8489,7 +8492,6 @@ F: arch/arm/mach-s3c24xx/bast-irq.c
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
M: Kevin Hilman <khilman@deeprootsystems.com>
L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
T: git git://gitorious.org/linux-davinci/linux-davinci.git
Q: http://patchwork.kernel.org/project/linux-davinci/list/
S: Supported
@ -8499,7 +8501,6 @@ F: drivers/i2c/busses/i2c-davinci.c
TI DAVINCI SERIES MEDIA DRIVER
M: Lad, Prabhakar <prabhakar.csengg@gmail.com>
L: linux-media@vger.kernel.org
L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
@ -9709,11 +9710,6 @@ S: Maintained
F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
USB/IP DRIVERS
L: linux-usb@vger.kernel.org
S: Orphan
F: drivers/staging/usbip/
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org

View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 18
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc4
NAME = Diseased Newt
# *DOCUMENTATION*

View File

@ -1187,7 +1187,7 @@ config DEBUG_UART_VIRT
default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1
default 0xf1f02800 if DEBUG_SUNXI_R_UART
default 0xf2100000 if DEBUG_PXA_UART1
default 0xf6200000 if DEBUG_PXA_UART1
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \

View File

@ -33,6 +33,13 @@
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
status = "okay";
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
@ -42,6 +49,18 @@
&iomuxc {
vf610-cosmic {
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTB28__GPIO_98 0x219d
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2

View File

@ -34,6 +34,10 @@
};
};
&clkc {
fclk-enable = <0xf>;
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";

View File

@ -26,6 +26,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/edma.h>
#include <linux/dma-mapping.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
@ -1623,6 +1624,11 @@ static int edma_probe(struct platform_device *pdev)
struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
int ret;
struct platform_device_info edma_dev_info = {
.name = "edma-dma-engine",
.dma_mask = DMA_BIT_MASK(32),
.parent = &pdev->dev,
};
if (node) {
/* Check if this is a second instance registered */
@ -1793,6 +1799,9 @@ static int edma_probe(struct platform_device *pdev)
edma_write_array(j, EDMA_QRAE, i, 0x0);
}
arch_num_cc++;
edma_dev_info.id = j;
platform_device_register_full(&edma_dev_info);
}
return 0;

View File

@ -97,6 +97,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y

View File

@ -158,6 +158,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y

View File

@ -235,6 +235,7 @@ CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_SPI_XILINX=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_DWAPB=y
@ -411,6 +412,7 @@ CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
CONFIG_QCOM_GSBI=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_APQ_MMCC_8084=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y

View File

@ -86,7 +86,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_NETFILTER=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
@ -112,6 +111,7 @@ CONFIG_MTD_OOPS=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
@ -317,7 +317,7 @@ CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS4_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y

View File

@ -1,5 +1,6 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_FHANDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@ -11,23 +12,17 @@ CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_HOTPLUG=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SOCFPGA=y
CONFIG_MACH_SOCFPGA_CYCLONE5=y
CONFIG_ARM_THUMBEE=y
# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
# CONFIG_CACHE_L2X0 is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
@ -41,38 +36,30 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_IPV6=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_PROC_DEVICETREE=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SRAM=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
CONFIG_MICREL_PHY=y
# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
CONFIG_INPUT_EVDEV=y
CONFIG_DWMAC_SOCFPGA=y
CONFIG_PPS=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_PTP_1588_CLOCK=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_GARP=y
CONFIG_IPV6=y
CONFIG_MICREL_PHY=y
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
@ -81,45 +68,43 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_DW=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_PMBUS=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_FHANDLE=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_CONFIGFS_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_DEBUG_USER=y
CONFIG_XZ_DEC=y
CONFIG_I2C=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_CHARDEV=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
CONFIG_PM=y
CONFIG_SUSPEND=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
CONFIG_USB_DWC2_PLATFORM=y

View File

@ -58,8 +58,14 @@
#define PFD_PLL1_BASE (anatop_base + 0x2b0)
#define PFD_PLL2_BASE (anatop_base + 0x100)
#define PFD_PLL3_BASE (anatop_base + 0xf0)
#define PLL1_CTRL (anatop_base + 0x270)
#define PLL2_CTRL (anatop_base + 0x30)
#define PLL3_CTRL (anatop_base + 0x10)
#define PLL4_CTRL (anatop_base + 0x70)
#define PLL5_CTRL (anatop_base + 0xe0)
#define PLL6_CTRL (anatop_base + 0xa0)
#define PLL7_CTRL (anatop_base + 0x20)
#define ANA_MISC1 (anatop_base + 0x160)
static void __iomem *anatop_base;
static void __iomem *ccm_base;
@ -67,25 +73,34 @@ static void __iomem *ccm_base;
/* sources for multiplexer clocks, this is used multiple times */
static const char *fast_sels[] = { "firc", "fxosc", };
static const char *slow_sels[] = { "sirc_32k", "sxosc", };
static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", };
static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", };
static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", };
static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", };
static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", };
static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
/* FTM counter clock source, not module clock */
static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", };
static struct clk_div_table pll4_main_div_table[] = {
static struct clk_div_table pll4_audio_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 6 },
@ -120,6 +135,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0);
clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0);
/* Clock source from external clock via LVDs PAD */
clk[VF610_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
@ -133,31 +151,63 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));
clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1);
clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0);
clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1);
clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2);
clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3);
clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1);
clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0);
clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1);
clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2);
clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3);
clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1);
clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0);
clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1);
clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2);
clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3);
clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1);
/* Enet pll: fixed 50Mhz */
clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
/* pll6: default 960Mhz */
clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
/* pll7: USB1 PLL at 480MHz */
clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
/* Do not bypass PLLs initially */
clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13);
clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13);
clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13);
clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13);
clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13);
clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13);
clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);
clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
@ -167,12 +217,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);
clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1);
clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
@ -191,8 +241,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));
clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10);
clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20);
clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);

View File

@ -76,7 +76,7 @@ static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
u32 n, byte_enables, data;
if (!is_pci_memory(addr)) {
__raw_writeb(value, addr);
__raw_writeb(value, p);
return;
}
@ -141,7 +141,7 @@ static inline unsigned char __indirect_readb(const volatile void __iomem *p)
u32 n, byte_enables, data;
if (!is_pci_memory(addr))
return __raw_readb(addr);
return __raw_readb(p);
n = addr % 4;
byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;

View File

@ -917,6 +917,10 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
static int __init omap_device_late_init(void)
{
bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
WARN(!of_have_populated_dt(),
"legacy booting deprecated, please update to boot with .dts\n");
return 0;
}
omap_late_initcall_sync(omap_device_late_init);

View File

@ -38,6 +38,11 @@
#define DMEMC_VIRT IOMEM(0xf6100000)
#define DMEMC_SIZE 0x00100000
/*
* Reserved space for low level debug virtual addresses within
* 0xf6200000..0xf6201000
*/
/*
* Internal Memory Controller (PXA27x and later)
*/

View File

@ -35,6 +35,9 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_XGENE=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_XGENE=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_KSM=y
@ -52,6 +55,7 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_BPF_JIT=y
# CONFIG_WIRELESS is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
@ -65,16 +69,17 @@ CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_XGENE=y
CONFIG_PHY_XGENE=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_VIRTIO_NET=y
CONFIG_NET_XGENE=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
CONFIG_NET_XGENE=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
@ -87,6 +92,11 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HMC_DRV is not set
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_PL061=y
CONFIG_GPIO_XGENE=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@ -97,13 +107,25 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SPI=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_PHY_XGENE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

View File

@ -792,3 +792,5 @@ __SYSCALL(__NR_renameat2, sys_renameat2)
__SYSCALL(__NR_getrandom, sys_getrandom)
#define __NR_memfd_create 385
__SYSCALL(__NR_memfd_create, sys_memfd_create)
#define __NR_bpf 386
__SYSCALL(__NR_bpf, sys_bpf)

View File

@ -528,7 +528,7 @@ static int __maybe_unused cpu_psci_cpu_suspend(unsigned long index)
if (WARN_ON_ONCE(!index))
return -EINVAL;
if (state->type == PSCI_POWER_STATE_TYPE_STANDBY)
if (state[index - 1].type == PSCI_POWER_STATE_TYPE_STANDBY)
ret = psci_ops.cpu_suspend(state[index - 1], 0);
else
ret = __cpu_suspend(index, psci_suspend_finisher);

View File

@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
#define NR_syscalls 354
#define NR_syscalls 355
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT

View File

@ -359,5 +359,6 @@
#define __NR_renameat2 351
#define __NR_getrandom 352
#define __NR_memfd_create 353
#define __NR_bpf 354
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */

View File

@ -374,4 +374,5 @@ ENTRY(sys_call_table)
.long sys_renameat2
.long sys_getrandom
.long sys_memfd_create
.long sys_bpf

View File

@ -93,6 +93,15 @@ LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
KBUILD_AFLAGS_MODULE += -mlong-calls
KBUILD_CFLAGS_MODULE += -mlong-calls
#
# pass -msoft-float to GAS if it supports it. However on newer binutils
# (specifically newer than 2.24.51.20140728) we then also need to explicitly
# set ".set hardfloat" in all files which manipulate floating point registers.
#
ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
endif
cflags-y += -ffreestanding
#

View File

@ -809,6 +809,7 @@ static struct irq_chip octeon_irq_chip_ciu_gpio_v2 = {
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
.irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
@ -823,6 +824,7 @@ static struct irq_chip octeon_irq_chip_ciu_gpio = {
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity,
.irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};

View File

@ -13,6 +13,8 @@
#include <asm/mipsregs.h>
.macro fpu_save_single thread tmp=t0
.set push
SET_HARDFLOAT
cfc1 \tmp, fcr31
swc1 $f0, THREAD_FPR0_LS64(\thread)
swc1 $f1, THREAD_FPR1_LS64(\thread)
@ -47,9 +49,12 @@
swc1 $f30, THREAD_FPR30_LS64(\thread)
swc1 $f31, THREAD_FPR31_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
.set pop
.endm
.macro fpu_restore_single thread tmp=t0
.set push
SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
lwc1 $f0, THREAD_FPR0_LS64(\thread)
lwc1 $f1, THREAD_FPR1_LS64(\thread)
@ -84,6 +89,7 @@
lwc1 $f30, THREAD_FPR30_LS64(\thread)
lwc1 $f31, THREAD_FPR31_LS64(\thread)
ctc1 \tmp, fcr31
.set pop
.endm
.macro cpu_save_nonscratch thread

View File

@ -57,6 +57,8 @@
#endif /* CONFIG_CPU_MIPSR2 */
.macro fpu_save_16even thread tmp=t0
.set push
SET_HARDFLOAT
cfc1 \tmp, fcr31
sdc1 $f0, THREAD_FPR0_LS64(\thread)
sdc1 $f2, THREAD_FPR2_LS64(\thread)
@ -75,11 +77,13 @@
sdc1 $f28, THREAD_FPR28_LS64(\thread)
sdc1 $f30, THREAD_FPR30_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
.set pop
.endm
.macro fpu_save_16odd thread
.set push
.set mips64r2
SET_HARDFLOAT
sdc1 $f1, THREAD_FPR1_LS64(\thread)
sdc1 $f3, THREAD_FPR3_LS64(\thread)
sdc1 $f5, THREAD_FPR5_LS64(\thread)
@ -110,6 +114,8 @@
.endm
.macro fpu_restore_16even thread tmp=t0
.set push
SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
ldc1 $f0, THREAD_FPR0_LS64(\thread)
ldc1 $f2, THREAD_FPR2_LS64(\thread)
@ -133,6 +139,7 @@
.macro fpu_restore_16odd thread
.set push
.set mips64r2
SET_HARDFLOAT
ldc1 $f1, THREAD_FPR1_LS64(\thread)
ldc1 $f3, THREAD_FPR3_LS64(\thread)
ldc1 $f5, THREAD_FPR5_LS64(\thread)
@ -277,6 +284,7 @@
.macro cfcmsa rd, cs
.set push
.set noat
SET_HARDFLOAT
.insn
.word CFC_MSA_INSN | (\cs << 11)
move \rd, $1
@ -286,6 +294,7 @@
.macro ctcmsa cd, rs
.set push
.set noat
SET_HARDFLOAT
move $1, \rs
.word CTC_MSA_INSN | (\cd << 6)
.set pop
@ -294,6 +303,7 @@
.macro ld_d wd, off, base
.set push
.set noat
SET_HARDFLOAT
add $1, \base, \off
.word LDD_MSA_INSN | (\wd << 6)
.set pop
@ -302,6 +312,7 @@
.macro st_d wd, off, base
.set push
.set noat
SET_HARDFLOAT
add $1, \base, \off
.word STD_MSA_INSN | (\wd << 6)
.set pop
@ -310,6 +321,7 @@
.macro copy_u_w rd, ws, n
.set push
.set noat
SET_HARDFLOAT
.insn
.word COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
@ -320,6 +332,7 @@
.macro copy_u_d rd, ws, n
.set push
.set noat
SET_HARDFLOAT
.insn
.word COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
@ -330,6 +343,7 @@
.macro insert_w wd, n, rs
.set push
.set noat
SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
@ -339,6 +353,7 @@
.macro insert_d wd, n, rs
.set push
.set noat
SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
@ -381,6 +396,7 @@
st_d 31, THREAD_FPR31, \thread
.set push
.set noat
SET_HARDFLOAT
cfcmsa $1, MSA_CSR
sw $1, THREAD_MSA_CSR(\thread)
.set pop
@ -389,6 +405,7 @@
.macro msa_restore_all thread
.set push
.set noat
SET_HARDFLOAT
lw $1, THREAD_MSA_CSR(\thread)
ctcmsa MSA_CSR, $1
.set pop
@ -441,6 +458,7 @@
.macro msa_init_all_upper
.set push
.set noat
SET_HARDFLOAT
not $1, zero
msa_init_upper 0
.set pop

View File

@ -14,6 +14,20 @@
#include <asm/sgidefs.h>
/*
* starting with binutils 2.24.51.20140729, MIPS binutils warn about mixing
* hardfloat and softfloat object files. The kernel build uses soft-float by
* default, so we also need to pass -msoft-float along to GAS if it supports it.
* But this in turn causes assembler errors in files which access hardfloat
* registers. We detect if GAS supports "-msoft-float" in the Makefile and
* explicitly put ".set hardfloat" where floating point registers are touched.
*/
#ifdef GAS_HAS_SET_HARDFLOAT
#define SET_HARDFLOAT .set hardfloat
#else
#define SET_HARDFLOAT
#endif
#if _MIPS_SIM == _MIPS_SIM_ABI32
/*

View File

@ -145,8 +145,8 @@ static inline void lose_fpu(int save)
if (is_msa_enabled()) {
if (save) {
save_msa(current);
asm volatile("cfc1 %0, $31"
: "=r"(current->thread.fpu.fcr31));
current->thread.fpu.fcr31 =
read_32bit_cp1_register(CP1_STATUS);
}
disable_msa();
clear_thread_flag(TIF_USEDMSA);

View File

@ -1324,7 +1324,7 @@ do { \
/*
* Macros to access the floating point coprocessor control registers
*/
#define read_32bit_cp1_register(source) \
#define _read_32bit_cp1_register(source, gas_hardfloat) \
({ \
int __res; \
\
@ -1334,12 +1334,21 @@ do { \
" # gas fails to assemble cfc1 for some archs, \n" \
" # like Octeon. \n" \
" .set mips1 \n" \
" "STR(gas_hardfloat)" \n" \
" cfc1 %0,"STR(source)" \n" \
" .set pop \n" \
: "=r" (__res)); \
__res; \
})
#ifdef GAS_HAS_SET_HARDFLOAT
#define read_32bit_cp1_register(source) \
_read_32bit_cp1_register(source, .set hardfloat)
#else
#define read_32bit_cp1_register(source) \
_read_32bit_cp1_register(source, )
#endif
#ifdef HAVE_AS_DSP
#define rddsp(mask) \
({ \

View File

@ -375,16 +375,17 @@
#define __NR_seccomp (__NR_Linux + 352)
#define __NR_getrandom (__NR_Linux + 353)
#define __NR_memfd_create (__NR_Linux + 354)
#define __NR_bpf (__NR_Linux + 355)
/*
* Offset of the last Linux o32 flavoured syscall
*/
#define __NR_Linux_syscalls 354
#define __NR_Linux_syscalls 355
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
#define __NR_O32_Linux_syscalls 354
#define __NR_O32_Linux_syscalls 355
#if _MIPS_SIM == _MIPS_SIM_ABI64
@ -707,16 +708,17 @@
#define __NR_seccomp (__NR_Linux + 312)
#define __NR_getrandom (__NR_Linux + 313)
#define __NR_memfd_create (__NR_Linux + 314)
#define __NR_bpf (__NR_Linux + 315)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
#define __NR_Linux_syscalls 314
#define __NR_Linux_syscalls 315
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
#define __NR_64_Linux_syscalls 314
#define __NR_64_Linux_syscalls 315
#if _MIPS_SIM == _MIPS_SIM_NABI32
@ -1043,15 +1045,16 @@
#define __NR_seccomp (__NR_Linux + 316)
#define __NR_getrandom (__NR_Linux + 317)
#define __NR_memfd_create (__NR_Linux + 318)
#define __NR_memfd_create (__NR_Linux + 319)
/*
* Offset of the last N32 flavoured syscall
*/
#define __NR_Linux_syscalls 318
#define __NR_Linux_syscalls 319
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
#define __NR_N32_Linux_syscalls 318
#define __NR_N32_Linux_syscalls 319
#endif /* _UAPI_ASM_UNISTD_H */

View File

@ -144,7 +144,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
case mm_bc1t_op:
preempt_disable();
if (is_fpu_owner())
asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
@ -562,11 +562,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
case cop1_op:
preempt_disable();
if (is_fpu_owner())
asm volatile(
".set push\n"
"\t.set mips1\n"
"\tcfc1\t%0,$31\n"
"\t.set pop" : "=r" (fcr31));
fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();

View File

@ -358,6 +358,7 @@ NESTED(nmi_handler, PT_SIZE, sp)
.set push
/* gas fails to assemble cfc1 for some archs (octeon).*/ \
.set mips1
SET_HARDFLOAT
cfc1 a1, fcr31
li a2, ~(0x3f << 12)
and a2, a1

View File

@ -28,6 +28,8 @@
.set mips1
/* Save floating point context */
LEAF(_save_fp_context)
.set push
SET_HARDFLOAT
li v0, 0 # assume success
cfc1 t1,fcr31
EX(swc1 $f0,(SC_FPREGS+0)(a0))
@ -65,6 +67,7 @@ LEAF(_save_fp_context)
EX(sw t1,(SC_FPC_CSR)(a0))
cfc1 t0,$0 # implementation/version
jr ra
.set pop
.set nomacro
EX(sw t0,(SC_FPC_EIR)(a0))
.set macro
@ -80,6 +83,8 @@ LEAF(_save_fp_context)
* stack frame which might have been changed by the user.
*/
LEAF(_restore_fp_context)
.set push
SET_HARDFLOAT
li v0, 0 # assume success
EX(lw t0,(SC_FPC_CSR)(a0))
EX(lwc1 $f0,(SC_FPREGS+0)(a0))
@ -116,6 +121,7 @@ LEAF(_restore_fp_context)
EX(lwc1 $f31,(SC_FPREGS+248)(a0))
jr ra
ctc1 t0,fcr31
.set pop
END(_restore_fp_context)
.set reorder

View File

@ -120,6 +120,9 @@ LEAF(_restore_fp)
#define FPU_DEFAULT 0x00000000
.set push
SET_HARDFLOAT
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
@ -165,3 +168,5 @@ LEAF(_init_fpu)
mtc1 t0, $f31
jr ra
END(_init_fpu)
.set pop

View File

@ -19,8 +19,12 @@
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
#undef fp
.macro EX insn, reg, src
.set push
SET_HARDFLOAT
.set nomacro
.ex\@: \insn \reg, \src
.set pop
@ -33,12 +37,17 @@
.set arch=r4000
LEAF(_save_fp_context)
.set push
SET_HARDFLOAT
cfc1 t1, fcr31
.set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
.set mips64r2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip storing odd if FR=0
@ -64,6 +73,8 @@ LEAF(_save_fp_context)
1: .set pop
#endif
.set push
SET_HARDFLOAT
/* Store the 16 even double precision registers */
EX sdc1 $f0, SC_FPREGS+0(a0)
EX sdc1 $f2, SC_FPREGS+16(a0)
@ -84,11 +95,14 @@ LEAF(_save_fp_context)
EX sw t1, SC_FPC_CSR(a0)
jr ra
li v0, 0 # success
.set pop
END(_save_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
/* Save 32-bit process floating point context */
LEAF(_save_fp_context32)
.set push
SET_HARDFLOAT
cfc1 t1, fcr31
mfc0 t0, CP0_STATUS
@ -134,6 +148,7 @@ LEAF(_save_fp_context32)
EX sw t1, SC32_FPC_CSR(a0)
cfc1 t0, $0 # implementation/version
EX sw t0, SC32_FPC_EIR(a0)
.set pop
jr ra
li v0, 0 # success
@ -150,8 +165,10 @@ LEAF(_restore_fp_context)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
.set mips64r2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip loading odd if FR=0
@ -175,6 +192,8 @@ LEAF(_restore_fp_context)
EX ldc1 $f31, SC_FPREGS+248(a0)
1: .set pop
#endif
.set push
SET_HARDFLOAT
EX ldc1 $f0, SC_FPREGS+0(a0)
EX ldc1 $f2, SC_FPREGS+16(a0)
EX ldc1 $f4, SC_FPREGS+32(a0)
@ -192,6 +211,7 @@ LEAF(_restore_fp_context)
EX ldc1 $f28, SC_FPREGS+224(a0)
EX ldc1 $f30, SC_FPREGS+240(a0)
ctc1 t1, fcr31
.set pop
jr ra
li v0, 0 # success
END(_restore_fp_context)
@ -199,6 +219,8 @@ LEAF(_restore_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
LEAF(_restore_fp_context32)
/* Restore an o32 sigcontext. */
.set push
SET_HARDFLOAT
EX lw t1, SC32_FPC_CSR(a0)
mfc0 t0, CP0_STATUS
@ -242,6 +264,7 @@ LEAF(_restore_fp_context32)
ctc1 t1, fcr31
jr ra
li v0, 0 # success
.set pop
END(_restore_fp_context32)
#endif

View File

@ -22,6 +22,9 @@
#include <asm/asmmacro.h>
/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
#undef fp
/*
* Offset to the current process status flags, the first 32 bytes of the
* stack are not used.
@ -65,8 +68,12 @@
bgtz a3, 1f
/* Save 128b MSA vector context + scalar FP control & status. */
.set push
SET_HARDFLOAT
cfc1 t1, fcr31
msa_save_all a0
.set pop /* SET_HARDFLOAT */
sw t1, THREAD_FCR31(a0)
b 2f
@ -161,6 +168,9 @@ LEAF(_init_msa_upper)
#define FPU_DEFAULT 0x00000000
.set push
SET_HARDFLOAT
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
@ -232,7 +242,8 @@ LEAF(_init_fpu)
#ifdef CONFIG_CPU_MIPS32_R2
.set push
.set mips64r2
.set mips32r2
.set fp=64
sll t0, t0, 5 # is Status.FR set?
bgez t0, 1f # no: skip setting upper 32b
@ -291,3 +302,5 @@ LEAF(_init_fpu)
#endif
jr ra
END(_init_fpu)
.set pop /* SET_HARDFLOAT */

View File

@ -18,6 +18,9 @@
.set noreorder
.set mips2
.set push
SET_HARDFLOAT
/* Save floating point context */
LEAF(_save_fp_context)
mfc0 t0,CP0_STATUS
@ -85,3 +88,5 @@
1: jr ra
nop
END(_restore_fp_context)
.set pop /* SET_HARDFLOAT */

View File

@ -579,3 +579,4 @@ EXPORT(sys_call_table)
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
PTR sys_bpf /* 4355 */

View File

@ -434,4 +434,5 @@ EXPORT(sys_call_table)
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
PTR sys_bpf /* 5315 */
.size sys_call_table,.-sys_call_table

View File

@ -427,4 +427,5 @@ EXPORT(sysn32_call_table)
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
PTR sys_bpf
.size sysn32_call_table,.-sysn32_call_table

View File

@ -564,4 +564,5 @@ EXPORT(sys32_call_table)
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
PTR sys_bpf /* 4355 */
.size sys32_call_table,.-sys32_call_table

View File

@ -683,6 +683,7 @@ static void __init arch_mem_init(char **cmdline_p)
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
/* Tell bootmem about cma reserved memblock section */
for_each_memblock(reserved, reg)
if (reg->size != 0)
reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
}

View File

@ -34,7 +34,7 @@ static void dump_tlb(int first, int last)
entrylo0 = read_c0_entrylo0();
/* Unused entries have a virtual address of KSEG0. */
if ((entryhi & 0xffffe000) != 0x80000000
if ((entryhi & 0xfffff000) != 0x80000000
&& (entryhi & 0xfc0) == asid) {
/*
* Only print entries in use
@ -43,7 +43,7 @@ static void dump_tlb(int first, int last)
printk("va=%08lx asid=%08lx"
" [pa=%06lx n=%d d=%d v=%d g=%d]",
(entryhi & 0xffffe000),
(entryhi & 0xfffff000),
entryhi & 0xfc0,
entrylo0 & PAGE_MASK,
(entrylo0 & (1 << 11)) ? 1 : 0,

View File

@ -40,9 +40,11 @@ FEXPORT(__strnlen_\func\()_nocheck_asm)
.else
EX(lbe, t0, (v0), .Lfault\@)
.endif
PTR_ADDIU v0, 1
.set noreorder
bnez t0, 1b
1: PTR_SUBU v0, a0
1: PTR_ADDIU v0, 1
.set reorder
PTR_SUBU v0, a0
jr ra
END(__strnlen_\func\()_asm)

View File

@ -584,11 +584,7 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
if (insn.i_format.rs == bc_op) {
preempt_disable();
if (is_fpu_owner())
asm volatile(
".set push\n"
"\t.set mips1\n"
"\tcfc1\t%0,$31\n"
"\t.set pop" : "=r" (fcr31));
fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();

View File

@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
msg.data = 0xc00 | msixvec;
ret = irq_set_msi_desc(xirq, desc);
if (ret < 0) {
destroy_irq(xirq);
if (ret < 0)
return ret;
}
write_msi_msg(xirq, &msg);
return 0;

View File

@ -72,37 +72,37 @@
/* Utility macros */
#define SKIP_TO_NEXT_CPU(reg_entry) \
({ \
while (reg_entry->reg_id != REG_ID("CPUEND")) \
while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) \
reg_entry++; \
reg_entry++; \
})
/* Kernel Dump section info */
struct fadump_section {
u32 request_flag;
u16 source_data_type;
u16 error_flags;
u64 source_address;
u64 source_len;
u64 bytes_dumped;
u64 destination_address;
__be32 request_flag;
__be16 source_data_type;
__be16 error_flags;
__be64 source_address;
__be64 source_len;
__be64 bytes_dumped;
__be64 destination_address;
};
/* ibm,configure-kernel-dump header. */
struct fadump_section_header {
u32 dump_format_version;
u16 dump_num_sections;
u16 dump_status_flag;
u32 offset_first_dump_section;
__be32 dump_format_version;
__be16 dump_num_sections;
__be16 dump_status_flag;
__be32 offset_first_dump_section;
/* Fields for disk dump option. */
u32 dd_block_size;
u64 dd_block_offset;
u64 dd_num_blocks;
u32 dd_offset_disk_path;
__be32 dd_block_size;
__be64 dd_block_offset;
__be64 dd_num_blocks;
__be32 dd_offset_disk_path;
/* Maximum time allowed to prevent an automatic dump-reboot. */
u32 max_time_auto;
__be32 max_time_auto;
};
/*
@ -174,15 +174,15 @@ static inline u64 str_to_u64(const char *str)
/* Register save area header. */
struct fadump_reg_save_area_header {
u64 magic_number;
u32 version;
u32 num_cpu_offset;
__be64 magic_number;
__be32 version;
__be32 num_cpu_offset;
};
/* Register entry. */
struct fadump_reg_entry {
u64 reg_id;
u64 reg_value;
__be64 reg_id;
__be64 reg_value;
};
/* fadump crash info structure */

View File

@ -659,7 +659,13 @@ _GLOBAL(ret_from_except_lite)
3:
#endif
bl save_nvgprs
/*
* Use a non volatile GPR to save and restore our thread_info flags
* across the call to restore_interrupts.
*/
mr r30,r4
bl restore_interrupts
mr r4,r30
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_notify_resume
b ret_from_except

View File

@ -58,7 +58,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
const __be32 *sections;
int i, num_sections;
int size;
const int *token;
const __be32 *token;
if (depth != 1 || strcmp(uname, "rtas") != 0)
return 0;
@ -72,7 +72,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node,
return 1;
fw_dump.fadump_supported = 1;
fw_dump.ibm_configure_kernel_dump = *token;
fw_dump.ibm_configure_kernel_dump = be32_to_cpu(*token);
/*
* The 'ibm,kernel-dump' rtas node is present only if there is
@ -147,11 +147,11 @@ static unsigned long init_fadump_mem_struct(struct fadump_mem_struct *fdm,
memset(fdm, 0, sizeof(struct fadump_mem_struct));
addr = addr & PAGE_MASK;
fdm->header.dump_format_version = 0x00000001;
fdm->header.dump_num_sections = 3;
fdm->header.dump_format_version = cpu_to_be32(0x00000001);
fdm->header.dump_num_sections = cpu_to_be16(3);
fdm->header.dump_status_flag = 0;
fdm->header.offset_first_dump_section =
(u32)offsetof(struct fadump_mem_struct, cpu_state_data);
cpu_to_be32((u32)offsetof(struct fadump_mem_struct, cpu_state_data));
/*
* Fields for disk dump option.
@ -167,27 +167,27 @@ static unsigned long init_fadump_mem_struct(struct fadump_mem_struct *fdm,
/* Kernel dump sections */
/* cpu state data section. */
fdm->cpu_state_data.request_flag = FADUMP_REQUEST_FLAG;
fdm->cpu_state_data.source_data_type = FADUMP_CPU_STATE_DATA;
fdm->cpu_state_data.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
fdm->cpu_state_data.source_data_type = cpu_to_be16(FADUMP_CPU_STATE_DATA);
fdm->cpu_state_data.source_address = 0;
fdm->cpu_state_data.source_len = fw_dump.cpu_state_data_size;
fdm->cpu_state_data.destination_address = addr;
fdm->cpu_state_data.source_len = cpu_to_be64(fw_dump.cpu_state_data_size);
fdm->cpu_state_data.destination_address = cpu_to_be64(addr);
addr += fw_dump.cpu_state_data_size;
/* hpte region section */
fdm->hpte_region.request_flag = FADUMP_REQUEST_FLAG;
fdm->hpte_region.source_data_type = FADUMP_HPTE_REGION;
fdm->hpte_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
fdm->hpte_region.source_data_type = cpu_to_be16(FADUMP_HPTE_REGION);
fdm->hpte_region.source_address = 0;
fdm->hpte_region.source_len = fw_dump.hpte_region_size;
fdm->hpte_region.destination_address = addr;
fdm->hpte_region.source_len = cpu_to_be64(fw_dump.hpte_region_size);
fdm->hpte_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.hpte_region_size;
/* RMA region section */
fdm->rmr_region.request_flag = FADUMP_REQUEST_FLAG;
fdm->rmr_region.source_data_type = FADUMP_REAL_MODE_REGION;
fdm->rmr_region.source_address = RMA_START;
fdm->rmr_region.source_len = fw_dump.boot_memory_size;
fdm->rmr_region.destination_address = addr;
fdm->rmr_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
fdm->rmr_region.source_data_type = cpu_to_be16(FADUMP_REAL_MODE_REGION);
fdm->rmr_region.source_address = cpu_to_be64(RMA_START);
fdm->rmr_region.source_len = cpu_to_be64(fw_dump.boot_memory_size);
fdm->rmr_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.boot_memory_size;
return addr;
@ -272,7 +272,7 @@ int __init fadump_reserve_mem(void)
* first kernel.
*/
if (fdm_active)
fw_dump.boot_memory_size = fdm_active->rmr_region.source_len;
fw_dump.boot_memory_size = be64_to_cpu(fdm_active->rmr_region.source_len);
else
fw_dump.boot_memory_size = fadump_calculate_reserve_size();
@ -314,8 +314,8 @@ int __init fadump_reserve_mem(void)
(unsigned long)(base >> 20));
fw_dump.fadumphdr_addr =
fdm_active->rmr_region.destination_address +
fdm_active->rmr_region.source_len;
be64_to_cpu(fdm_active->rmr_region.destination_address) +
be64_to_cpu(fdm_active->rmr_region.source_len);
pr_debug("fadumphdr_addr = %p\n",
(void *) fw_dump.fadumphdr_addr);
} else {
@ -472,9 +472,9 @@ fadump_read_registers(struct fadump_reg_entry *reg_entry, struct pt_regs *regs)
{
memset(regs, 0, sizeof(struct pt_regs));
while (reg_entry->reg_id != REG_ID("CPUEND")) {
fadump_set_regval(regs, reg_entry->reg_id,
reg_entry->reg_value);
while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) {
fadump_set_regval(regs, be64_to_cpu(reg_entry->reg_id),
be64_to_cpu(reg_entry->reg_value));
reg_entry++;
}
reg_entry++;
@ -603,20 +603,20 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
if (!fdm->cpu_state_data.bytes_dumped)
return -EINVAL;
addr = fdm->cpu_state_data.destination_address;
addr = be64_to_cpu(fdm->cpu_state_data.destination_address);
vaddr = __va(addr);
reg_header = vaddr;
if (reg_header->magic_number != REGSAVE_AREA_MAGIC) {
if (be64_to_cpu(reg_header->magic_number) != REGSAVE_AREA_MAGIC) {
printk(KERN_ERR "Unable to read register save area.\n");
return -ENOENT;
}
pr_debug("--------CPU State Data------------\n");
pr_debug("Magic Number: %llx\n", reg_header->magic_number);
pr_debug("NumCpuOffset: %x\n", reg_header->num_cpu_offset);
pr_debug("Magic Number: %llx\n", be64_to_cpu(reg_header->magic_number));
pr_debug("NumCpuOffset: %x\n", be32_to_cpu(reg_header->num_cpu_offset));
vaddr += reg_header->num_cpu_offset;
num_cpus = *((u32 *)(vaddr));
vaddr += be32_to_cpu(reg_header->num_cpu_offset);
num_cpus = be32_to_cpu(*((__be32 *)(vaddr)));
pr_debug("NumCpus : %u\n", num_cpus);
vaddr += sizeof(u32);
reg_entry = (struct fadump_reg_entry *)vaddr;
@ -639,13 +639,13 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
fdh = __va(fw_dump.fadumphdr_addr);
for (i = 0; i < num_cpus; i++) {
if (reg_entry->reg_id != REG_ID("CPUSTRT")) {
if (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUSTRT")) {
printk(KERN_ERR "Unable to read CPU state data\n");
rc = -ENOENT;
goto error_out;
}
/* Lower 4 bytes of reg_value contains logical cpu id */
cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK;
cpu = be64_to_cpu(reg_entry->reg_value) & FADUMP_CPU_ID_MASK;
if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
SKIP_TO_NEXT_CPU(reg_entry);
continue;
@ -692,7 +692,7 @@ static int __init process_fadump(const struct fadump_mem_struct *fdm_active)
return -EINVAL;
/* Check if the dump data is valid. */
if ((fdm_active->header.dump_status_flag == FADUMP_ERROR_FLAG) ||
if ((be16_to_cpu(fdm_active->header.dump_status_flag) == FADUMP_ERROR_FLAG) ||
(fdm_active->cpu_state_data.error_flags != 0) ||
(fdm_active->rmr_region.error_flags != 0)) {
printk(KERN_ERR "Dump taken by platform is not valid\n");
@ -828,7 +828,7 @@ static void fadump_setup_crash_memory_ranges(void)
static inline unsigned long fadump_relocate(unsigned long paddr)
{
if (paddr > RMA_START && paddr < fw_dump.boot_memory_size)
return fdm.rmr_region.destination_address + paddr;
return be64_to_cpu(fdm.rmr_region.destination_address) + paddr;
else
return paddr;
}
@ -902,7 +902,7 @@ static int fadump_create_elfcore_headers(char *bufp)
* to the specified destination_address. Hence set
* the correct offset.
*/
phdr->p_offset = fdm.rmr_region.destination_address;
phdr->p_offset = be64_to_cpu(fdm.rmr_region.destination_address);
}
phdr->p_paddr = mbase;
@ -951,7 +951,7 @@ static void register_fadump(void)
fadump_setup_crash_memory_ranges();
addr = fdm.rmr_region.destination_address + fdm.rmr_region.source_len;
addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len);
/* Initialize fadump crash info header. */
addr = init_fadump_header(addr);
vaddr = __va(addr);
@ -1023,7 +1023,7 @@ void fadump_cleanup(void)
/* Invalidate the registration only if dump is active. */
if (fw_dump.dump_active) {
init_fadump_mem_struct(&fdm,
fdm_active->cpu_state_data.destination_address);
be64_to_cpu(fdm_active->cpu_state_data.destination_address));
fadump_invalidate_dump(&fdm);
}
}
@ -1063,7 +1063,7 @@ static void fadump_invalidate_release_mem(void)
return;
}
destination_address = fdm_active->cpu_state_data.destination_address;
destination_address = be64_to_cpu(fdm_active->cpu_state_data.destination_address);
fadump_cleanup();
mutex_unlock(&fadump_mutex);
@ -1183,31 +1183,31 @@ static int fadump_region_show(struct seq_file *m, void *private)
seq_printf(m,
"CPU : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
fdm_ptr->cpu_state_data.destination_address,
fdm_ptr->cpu_state_data.destination_address +
fdm_ptr->cpu_state_data.source_len - 1,
fdm_ptr->cpu_state_data.source_len,
fdm_ptr->cpu_state_data.bytes_dumped);
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address),
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) +
be64_to_cpu(fdm_ptr->cpu_state_data.source_len) - 1,
be64_to_cpu(fdm_ptr->cpu_state_data.source_len),
be64_to_cpu(fdm_ptr->cpu_state_data.bytes_dumped));
seq_printf(m,
"HPTE: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
fdm_ptr->hpte_region.destination_address,
fdm_ptr->hpte_region.destination_address +
fdm_ptr->hpte_region.source_len - 1,
fdm_ptr->hpte_region.source_len,
fdm_ptr->hpte_region.bytes_dumped);
be64_to_cpu(fdm_ptr->hpte_region.destination_address),
be64_to_cpu(fdm_ptr->hpte_region.destination_address) +
be64_to_cpu(fdm_ptr->hpte_region.source_len) - 1,
be64_to_cpu(fdm_ptr->hpte_region.source_len),
be64_to_cpu(fdm_ptr->hpte_region.bytes_dumped));
seq_printf(m,
"DUMP: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
fdm_ptr->rmr_region.destination_address,
fdm_ptr->rmr_region.destination_address +
fdm_ptr->rmr_region.source_len - 1,
fdm_ptr->rmr_region.source_len,
fdm_ptr->rmr_region.bytes_dumped);
be64_to_cpu(fdm_ptr->rmr_region.destination_address),
be64_to_cpu(fdm_ptr->rmr_region.destination_address) +
be64_to_cpu(fdm_ptr->rmr_region.source_len) - 1,
be64_to_cpu(fdm_ptr->rmr_region.source_len),
be64_to_cpu(fdm_ptr->rmr_region.bytes_dumped));
if (!fdm_active ||
(fw_dump.reserve_dump_area_start ==
fdm_ptr->cpu_state_data.destination_address))
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address)))
goto out;
/* Dump is active. Show reserved memory region. */
@ -1215,10 +1215,10 @@ static int fadump_region_show(struct seq_file *m, void *private)
" : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
(unsigned long long)fw_dump.reserve_dump_area_start,
fdm_ptr->cpu_state_data.destination_address - 1,
fdm_ptr->cpu_state_data.destination_address -
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - 1,
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start,
fdm_ptr->cpu_state_data.destination_address -
be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start);
out:
if (fdm_active)

View File

@ -103,7 +103,7 @@ unsigned long __max_low_memory = MAX_LOW_MEM;
/*
* Check for command-line options that affect what MMU_init will do.
*/
void MMU_setup(void)
void __init MMU_setup(void)
{
/* Check for nobats option (used in mapin_ram). */
if (strstr(boot_command_line, "nobats")) {

View File

@ -216,14 +216,54 @@ static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf,
&data, len);
if (rc)
return -ENXIO;
/*
* Now there is some trickery with the data returned by OPAL
* as it's the desired data right justified in a 32-bit BE
* word.
*
* This is a very bad interface and I'm to blame for it :-(
*
* So we can't just apply a 32-bit swap to what comes from OPAL,
* because user space expects the *bytes* to be in their proper
* respective positions (ie, LPC position).
*
* So what we really want to do here is to shift data right
* appropriately on a LE kernel.
*
* IE. If the LPC transaction has bytes B0, B1, B2 and B3 in that
* order, we have in memory written to by OPAL at the "data"
* pointer:
*
* Bytes: OPAL "data" LE "data"
* 32-bit: B0 B1 B2 B3 B0B1B2B3 B3B2B1B0
* 16-bit: B0 B1 0000B0B1 B1B00000
* 8-bit: B0 000000B0 B0000000
*
* So a BE kernel will have the leftmost of the above in the MSB
* and rightmost in the LSB and can just then "cast" the u32 "data"
* down to the appropriate quantity and write it.
*
* However, an LE kernel can't. It doesn't need to swap because a
* load from data followed by a store to user are going to preserve
* the byte ordering which is the wire byte order which is what the
* user wants, but in order to "crop" to the right size, we need to
* shift right first.
*/
switch(len) {
case 4:
rc = __put_user((u32)data, (u32 __user *)ubuf);
break;
case 2:
#ifdef __LITTLE_ENDIAN__
data >>= 16;
#endif
rc = __put_user((u16)data, (u16 __user *)ubuf);
break;
default:
#ifdef __LITTLE_ENDIAN__
data >>= 24;
#endif
rc = __put_user((u8)data, (u8 __user *)ubuf);
break;
}
@ -263,12 +303,31 @@ static ssize_t lpc_debug_write(struct file *filp, const char __user *ubuf,
else if (todo > 1 && (pos & 1) == 0)
len = 2;
}
/*
* Similarly to the read case, we have some trickery here but
* it's different to handle. We need to pass the value to OPAL in
* a register whose layout depends on the access size. We want
* to reproduce the memory layout of the user, however we aren't
* doing a load from user and a store to another memory location
* which would achieve that. Here we pass the value to OPAL via
* a register which is expected to contain the "BE" interpretation
* of the byte sequence. IE: for a 32-bit access, byte 0 should be
* in the MSB. So here we *do* need to byteswap on LE.
*
* User bytes: LE "data" OPAL "data"
* 32-bit: B0 B1 B2 B3 B3B2B1B0 B0B1B2B3
* 16-bit: B0 B1 0000B1B0 0000B0B1
* 8-bit: B0 000000B0 000000B0
*/
switch(len) {
case 4:
rc = __get_user(data, (u32 __user *)ubuf);
data = cpu_to_be32(data);
break;
case 2:
rc = __get_user(data, (u16 __user *)ubuf);
data = cpu_to_be16(data);
break;
default:
rc = __get_user(data, (u8 __user *)ubuf);

View File

@ -382,7 +382,7 @@ static int dlpar_online_cpu(struct device_node *dn)
BUG_ON(get_cpu_current_state(cpu)
!= CPU_STATE_OFFLINE);
cpu_maps_update_done();
rc = cpu_up(cpu);
rc = device_online(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();
@ -467,7 +467,7 @@ static int dlpar_offline_cpu(struct device_node *dn)
if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
cpu_maps_update_done();
rc = cpu_down(cpu);
rc = device_offline(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();

View File

@ -43,6 +43,7 @@
#include <asm/trace.h>
#include <asm/firmware.h>
#include <asm/plpar_wrappers.h>
#include <asm/fadump.h>
#include "pseries.h"
@ -247,8 +248,17 @@ static void pSeries_lpar_hptab_clear(void)
}
#ifdef __LITTLE_ENDIAN__
/* Reset exceptions to big endian */
if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
/*
* Reset exceptions to big endian.
*
* FIXME this is a hack for kexec, we need to reset the exception
* endian before starting the new kernel and this is a convenient place
* to do it.
*
* This is also called on boot when a fadump happens. In that case we
* must not change the exception endian mode.
*/
if (firmware_has_feature(FW_FEATURE_SET_MODE) && !is_fadump_active()) {
long rc;
rc = pseries_big_endian_exceptions();

View File

@ -35,7 +35,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
@ -245,6 +244,7 @@ CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@ -252,11 +252,6 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@ -270,6 +265,7 @@ CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@ -286,9 +282,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
@ -374,14 +367,13 @@ CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
@ -427,7 +419,6 @@ CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
@ -481,14 +472,14 @@ CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
@ -574,7 +565,6 @@ CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCK_STAT=y
@ -600,8 +590,13 @@ CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_KPROBE_EVENT is not set
CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y
CONFIG_KPROBES_SANITY_TEST=y
@ -609,7 +604,10 @@ CONFIG_RBTREE_TEST=y
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
CONFIG_DMA_API_DEBUG=y
CONFIG_TEST_BPF=m
# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_ENCRYPTED_KEYS=m
@ -673,12 +671,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y

View File

@ -35,7 +35,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
@ -243,6 +242,7 @@ CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@ -250,11 +250,6 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@ -268,6 +263,7 @@ CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@ -284,9 +280,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
@ -371,14 +364,13 @@ CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
@ -424,7 +416,6 @@ CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
@ -478,13 +469,13 @@ CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
@ -626,12 +617,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y

View File

@ -33,7 +33,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
@ -241,6 +240,7 @@ CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@ -248,11 +248,6 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@ -266,6 +261,7 @@ CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@ -282,9 +278,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
@ -369,14 +362,13 @@ CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
@ -422,7 +414,6 @@ CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
@ -476,13 +467,13 @@ CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
@ -550,8 +541,11 @@ CONFIG_TIMER_STATS=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_LATENCYTOP=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_KPROBE_EVENT is not set
CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
@ -618,12 +612,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y

View File

@ -22,8 +22,8 @@ CONFIG_HZ_100=y
CONFIG_CRASH_DUMP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SECCOMP is not set
# CONFIG_IUCV is not set
CONFIG_NET=y
# CONFIG_IUCV is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@ -36,9 +36,9 @@ CONFIG_ENCLOSURE_SERVICES=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_ZFCP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@ -75,12 +75,6 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_FTRACE is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_PFAULT is not set
# CONFIG_S390_HYPFS_FS is not set
# CONFIG_VIRTUALIZATION is not set

View File

@ -92,10 +92,10 @@ CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=y
CONFIG_NETDEVICES=y
@ -164,14 +164,13 @@ CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

View File

@ -121,6 +121,8 @@ unsigned long __kprobes prepare_ftrace_return(unsigned long parent,
{
struct ftrace_graph_ent trace;
if (unlikely(ftrace_graph_is_dead()))
goto out;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
goto out;
ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;

View File

@ -19,6 +19,7 @@
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
ahi %r15,-16
basr %r5,0
0: al %r5,21f-0b(%r5) /* get &_vdso_data */
chi %r2,__CLOCK_REALTIME_COARSE
@ -34,8 +35,8 @@ __kernel_clock_gettime:
1: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
stcke 24(%r15) /* Store TOD clock */
lm %r0,%r1,25(%r15)
stcke 0(%r15) /* Store TOD clock */
lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,2f
@ -70,6 +71,7 @@ __kernel_clock_gettime:
8: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
ahi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
@ -96,8 +98,8 @@ __kernel_clock_gettime:
11: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 11b
stcke 24(%r15) /* Store TOD clock */
lm %r0,%r1,25(%r15)
stcke 0(%r15) /* Store TOD clock */
lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,12f
@ -132,11 +134,13 @@ __kernel_clock_gettime:
17: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
ahi %r15,16
br %r14
/* Fallback to system call */
19: lhi %r1,__NR_clock_gettime
svc 0
ahi %r15,16
br %r14
20: .long 1000000000

View File

@ -19,6 +19,7 @@
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
ahi %r15,-16
basr %r5,0
0: al %r5,13f-0b(%r5) /* get &_vdso_data */
1: ltr %r3,%r3 /* check if tz is NULL */
@ -29,30 +30,30 @@ __kernel_gettimeofday:
l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
stcke 24(%r15) /* Store TOD clock */
lm %r0,%r1,25(%r15)
stcke 0(%r15) /* Store TOD clock */
lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,3f
ahi %r0,-1
3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
st %r0,24(%r15)
st %r0,0(%r15)
l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 4f
a %r0,__VDSO_TK_MULT(%r5)
4: al %r0,24(%r15)
4: al %r0,0(%r15)
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,5f
ahi %r0,1
5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
5: mvc 0(4,%r15),__VDSO_XTIME_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 1b
l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
srdl %r0,0(%r4) /* >> tk->shift */
l %r4,24(%r15) /* get tv_sec from stack */
l %r4,0(%r15) /* get tv_sec from stack */
basr %r5,0
6: ltr %r0,%r0
jnz 7f
@ -71,6 +72,7 @@ __kernel_gettimeofday:
9: srl %r0,6
st %r0,4(%r2) /* store tv->tv_usec */
10: slr %r2,%r2
ahi %r15,16
br %r14
11: .long 1000000000
12: .long 274877907

View File

@ -19,6 +19,7 @@
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
aghi %r15,-16
larl %r5,_vdso_data
cghi %r2,__CLOCK_REALTIME_COARSE
je 4f
@ -37,10 +38,10 @@ __kernel_clock_gettime:
0: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
stcke 48(%r15) /* Store TOD clock */
stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
lg %r0,__VDSO_WTOM_SEC(%r5)
lg %r1,49(%r15)
lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_WTOM_NSEC(%r5)
@ -56,6 +57,7 @@ __kernel_clock_gettime:
2: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
aghi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
@ -82,9 +84,9 @@ __kernel_clock_gettime:
5: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 5b
stcke 48(%r15) /* Store TOD clock */
stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
lg %r1,49(%r15)
lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
@ -101,6 +103,7 @@ __kernel_clock_gettime:
7: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
aghi %r15,16
br %r14
/* CLOCK_THREAD_CPUTIME_ID for this thread */
@ -134,11 +137,13 @@ __kernel_clock_gettime:
slgr %r4,%r0 /* r4 = tv_nsec */
stg %r4,8(%r3)
lghi %r2,0
aghi %r15,16
br %r14
/* Fallback to system call */
12: lghi %r1,__NR_clock_gettime
svc 0
aghi %r15,16
br %r14
13: .quad 1000000000

View File

@ -19,6 +19,7 @@
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
aghi %r15,-16
larl %r5,_vdso_data
0: ltgr %r3,%r3 /* check if tz is NULL */
je 1f
@ -28,8 +29,8 @@ __kernel_gettimeofday:
lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
stcke 48(%r15) /* Store TOD clock */
lg %r1,49(%r15)
stcke 0(%r15) /* Store TOD clock */
lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
@ -50,6 +51,7 @@ __kernel_gettimeofday:
srlg %r0,%r0,6
stg %r0,8(%r2) /* store tv->tv_usec */
4: lghi %r2,0
aghi %r15,16
br %r14
5: .quad 1000000000
.long 274877907

View File

@ -66,7 +66,11 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
clock = S390_lowcore.last_update_clock;
asm volatile(
" stpt %0\n" /* Store current cpu timer value */
#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
" stckf %1" /* Store current tod clock value */
#else
" stck %1" /* Store current tod clock value */
#endif
: "=m" (S390_lowcore.last_update_timer),
"=m" (S390_lowcore.last_update_clock));
S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;

View File

@ -171,20 +171,23 @@ config WANT_DEV_COREDUMP
Drivers should "select" this option if they desire to use the
device coredump mechanism.
config DISABLE_DEV_COREDUMP
bool "Disable device coredump" if EXPERT
config ALLOW_DEV_COREDUMP
bool "Allow device coredump" if EXPERT
default y
help
Disable the device coredump mechanism despite drivers wanting to
use it; this allows for more sensitive systems or systems that
don't want to ever access the information to not have the code,
nor keep any data.
This option controls if the device coredump mechanism is available or
not; if disabled, the mechanism will be omitted even if drivers that
can use it are enabled.
Say 'N' for more sensitive systems or systems that don't want
to ever access the information to not have the code, nor keep any
data.
If unsure, say N.
If unsure, say Y.
config DEV_COREDUMP
bool
default y if WANT_DEV_COREDUMP
depends on !DISABLE_DEV_COREDUMP
depends on ALLOW_DEV_COREDUMP
config DEBUG_DRIVER
bool "Driver Core verbose debug messages"

View File

@ -724,12 +724,12 @@ class_dir_create_and_add(struct class *class, struct kobject *parent_kobj)
return &dir->kobj;
}
static DEFINE_MUTEX(gdp_mutex);
static struct kobject *get_device_parent(struct device *dev,
struct device *parent)
{
if (dev->class) {
static DEFINE_MUTEX(gdp_mutex);
struct kobject *kobj = NULL;
struct kobject *parent_kobj;
struct kobject *k;
@ -793,7 +793,9 @@ static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
glue_dir->kset != &dev->class->p->glue_dirs)
return;
mutex_lock(&gdp_mutex);
kobject_put(glue_dir);
mutex_unlock(&gdp_mutex);
}
static void cleanup_device_parent(struct device *dev)

View File

@ -342,7 +342,6 @@ struct rbd_device {
struct list_head rq_queue; /* incoming rq queue */
spinlock_t lock; /* queue, flags, open_count */
struct workqueue_struct *rq_wq;
struct work_struct rq_work;
struct rbd_image_header header;
@ -402,6 +401,8 @@ static struct kmem_cache *rbd_segment_name_cache;
static int rbd_major;
static DEFINE_IDA(rbd_dev_id_ida);
static struct workqueue_struct *rbd_wq;
/*
* Default to false for now, as single-major requires >= 0.75 version of
* userspace rbd utility.
@ -3452,7 +3453,7 @@ static void rbd_request_fn(struct request_queue *q)
}
if (queued)
queue_work(rbd_dev->rq_wq, &rbd_dev->rq_work);
queue_work(rbd_wq, &rbd_dev->rq_work);
}
/*
@ -3532,7 +3533,7 @@ static int rbd_obj_read_sync(struct rbd_device *rbd_dev,
page_count = (u32) calc_pages_for(offset, length);
pages = ceph_alloc_page_vector(page_count, GFP_KERNEL);
if (IS_ERR(pages))
ret = PTR_ERR(pages);
return PTR_ERR(pages);
ret = -ENOMEM;
obj_request = rbd_obj_request_create(object_name, offset, length,
@ -5242,16 +5243,9 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev)
set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE);
set_disk_ro(rbd_dev->disk, rbd_dev->mapping.read_only);
rbd_dev->rq_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
rbd_dev->disk->disk_name);
if (!rbd_dev->rq_wq) {
ret = -ENOMEM;
goto err_out_mapping;
}
ret = rbd_bus_add_dev(rbd_dev);
if (ret)
goto err_out_workqueue;
goto err_out_mapping;
/* Everything's ready. Announce the disk to the world. */
@ -5263,9 +5257,6 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev)
return ret;
err_out_workqueue:
destroy_workqueue(rbd_dev->rq_wq);
rbd_dev->rq_wq = NULL;
err_out_mapping:
rbd_dev_mapping_clear(rbd_dev);
err_out_disk:
@ -5512,7 +5503,6 @@ static void rbd_dev_device_release(struct device *dev)
{
struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
destroy_workqueue(rbd_dev->rq_wq);
rbd_free_disk(rbd_dev);
clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags);
rbd_dev_mapping_clear(rbd_dev);
@ -5716,11 +5706,21 @@ static int __init rbd_init(void)
if (rc)
return rc;
/*
* The number of active work items is limited by the number of
* rbd devices, so leave @max_active at default.
*/
rbd_wq = alloc_workqueue(RBD_DRV_NAME, WQ_MEM_RECLAIM, 0);
if (!rbd_wq) {
rc = -ENOMEM;
goto err_out_slab;
}
if (single_major) {
rbd_major = register_blkdev(0, RBD_DRV_NAME);
if (rbd_major < 0) {
rc = rbd_major;
goto err_out_slab;
goto err_out_wq;
}
}
@ -5738,6 +5738,8 @@ static int __init rbd_init(void)
err_out_blkdev:
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
err_out_wq:
destroy_workqueue(rbd_wq);
err_out_slab:
rbd_slab_exit();
return rc;
@ -5749,6 +5751,7 @@ static void __exit rbd_exit(void)
rbd_sysfs_cleanup();
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
destroy_workqueue(rbd_wq);
rbd_slab_exit();
}

View File

@ -1107,52 +1107,14 @@ bool edma_filter_fn(struct dma_chan *chan, void *param)
}
EXPORT_SYMBOL(edma_filter_fn);
static struct platform_device *pdev0, *pdev1;
static const struct platform_device_info edma_dev_info0 = {
.name = "edma-dma-engine",
.id = 0,
.dma_mask = DMA_BIT_MASK(32),
};
static const struct platform_device_info edma_dev_info1 = {
.name = "edma-dma-engine",
.id = 1,
.dma_mask = DMA_BIT_MASK(32),
};
static int edma_init(void)
{
int ret = platform_driver_register(&edma_driver);
if (ret == 0) {
pdev0 = platform_device_register_full(&edma_dev_info0);
if (IS_ERR(pdev0)) {
platform_driver_unregister(&edma_driver);
ret = PTR_ERR(pdev0);
goto out;
}
}
if (!of_have_populated_dt() && EDMA_CTLRS == 2) {
pdev1 = platform_device_register_full(&edma_dev_info1);
if (IS_ERR(pdev1)) {
platform_driver_unregister(&edma_driver);
platform_device_unregister(pdev0);
ret = PTR_ERR(pdev1);
}
}
out:
return ret;
return platform_driver_register(&edma_driver);
}
subsys_initcall(edma_init);
static void __exit edma_exit(void)
{
platform_device_unregister(pdev0);
if (pdev1)
platform_device_unregister(pdev1);
platform_driver_unregister(&edma_driver);
}
module_exit(edma_exit);

View File

@ -12,11 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301 USA.
* ------------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki

View File

@ -12,11 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA.
*/
#include <linux/kernel.h>

View File

@ -14,11 +14,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA.
*
* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
* Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey
* <mbailey@littlefeet-inc.com>

View File

@ -12,12 +12,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301 USA. */
GNU General Public License for more details. */
/* -------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl> */

View File

@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*

View File

@ -12,10 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*

View File

@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*

View File

@ -15,10 +15,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*

View File

@ -434,7 +434,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
}
}
ret = wait_for_completion_io_timeout(&dev->cmd_complete,
ret = wait_for_completion_timeout(&dev->cmd_complete,
dev->adapter.timeout);
if (ret == 0) {
dev_err(dev->dev, "controller timed out\n");

View File

@ -21,10 +21,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/delay.h>

View File

@ -23,10 +23,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>

View File

@ -17,10 +17,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/

View File

@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/

View File

@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/

View File

@ -19,10 +19,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/

View File

@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/

View File

@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>

View File

@ -12,11 +12,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even

View File

@ -15,10 +15,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>

View File

@ -15,10 +15,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*

View File

@ -11,11 +11,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
* USA.
*
* Author:
* Darius Augulis, Teltonika Inc.
*

View File

@ -11,11 +11,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */

View File

@ -14,10 +14,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*

View File

@ -14,10 +14,6 @@
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*

View File

@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*

View File

@ -17,10 +17,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*

View File

@ -22,10 +22,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>

View File

@ -18,10 +18,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>

View File

@ -18,10 +18,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>

View File

@ -12,10 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#define PORT_DATA 0

Some files were not shown because too many files have changed in this diff Show More