diff --git a/MAINTAINERS b/MAINTAINERS index 7084d8e8592f..5e218aaa4c7a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6496,6 +6496,13 @@ S: Maintained F: arch/x86/include/asm/pmc_core.h F: drivers/platform/x86/intel_pmc_core* +INVENSENSE MPU-3050 GYROSCOPE DRIVER +M: Linus Walleij +L: linux-iio@vger.kernel.org +S: Maintained +F: drivers/iio/gyro/mpu3050* +F: Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt + IOC3 ETHERNET DRIVER M: Ralf Baechle L: linux-mips@linux-mips.org diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 205a84420ae9..107b5efd4178 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -84,6 +84,23 @@ config HID_SENSOR_GYRO_3D Say yes here to build support for the HID SENSOR Gyroscope 3D. +config MPU3050 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP + +config MPU3050_I2C + tristate "Invensense MPU3050 devices on I2C" + depends on !(INPUT_MPU3050=y || INPUT_MPU3050=m) + select MPU3050 + select REGMAP_I2C + select I2C_MUX + help + This driver supports the Invensense MPU3050 gyroscope over I2C. + This driver can be built as a module. The module will be called + inv-mpu3050-i2c. + config IIO_ST_GYRO_3AXIS tristate "STMicroelectronics gyroscopes 3-Axis Driver" depends on (I2C || SPI_MASTER) && SYSFS diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile index f866a4be0667..f0e149a606b0 100644 --- a/drivers/iio/gyro/Makefile +++ b/drivers/iio/gyro/Makefile @@ -14,6 +14,11 @@ obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o +# Currently this is rolled into one module, split it if +# we ever create a separate SPI interface for MPU-3050 +obj-$(CONFIG_MPU3050) += mpu3050.o +mpu3050-objs := mpu3050-core.o mpu3050-i2c.o + itg3200-y := itg3200_core.o itg3200-$(CONFIG_IIO_BUFFER) += itg3200_buffer.o obj-$(CONFIG_ITG3200) += itg3200.o diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c new file mode 100644 index 000000000000..ed681c70a7b4 --- /dev/null +++ b/drivers/iio/gyro/mpu3050-core.c @@ -0,0 +1,1307 @@ +/* + * MPU3050 gyroscope driver + * + * Copyright (C) 2016 Linaro Ltd. + * Author: Linus Walleij + * + * Based on the input subsystem driver, Copyright (C) 2011 Wistron Co.Ltd + * Joseph Lai and trimmed down by + * Alan Cox in turn based on bma023.c. + * Device behaviour based on a misc driver posted by Nathan Royer in 2011. + * + * TODO: add support for setting up the low pass 3dB frequency. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpu3050.h" + +#define MPU3050_CHIP_ID 0x69 + +/* + * Register map: anything suffixed *_H is a big-endian high byte and always + * followed by the corresponding low byte (*_L) even though these are not + * explicitly included in the register definitions. + */ +#define MPU3050_CHIP_ID_REG 0x00 +#define MPU3050_PRODUCT_ID_REG 0x01 +#define MPU3050_XG_OFFS_TC 0x05 +#define MPU3050_YG_OFFS_TC 0x08 +#define MPU3050_ZG_OFFS_TC 0x0B +#define MPU3050_X_OFFS_USR_H 0x0C +#define MPU3050_Y_OFFS_USR_H 0x0E +#define MPU3050_Z_OFFS_USR_H 0x10 +#define MPU3050_FIFO_EN 0x12 +#define MPU3050_AUX_VDDIO 0x13 +#define MPU3050_SLV_ADDR 0x14 +#define MPU3050_SMPLRT_DIV 0x15 +#define MPU3050_DLPF_FS_SYNC 0x16 +#define MPU3050_INT_CFG 0x17 +#define MPU3050_AUX_ADDR 0x18 +#define MPU3050_INT_STATUS 0x1A +#define MPU3050_TEMP_H 0x1B +#define MPU3050_XOUT_H 0x1D +#define MPU3050_YOUT_H 0x1F +#define MPU3050_ZOUT_H 0x21 +#define MPU3050_DMP_CFG1 0x35 +#define MPU3050_DMP_CFG2 0x36 +#define MPU3050_BANK_SEL 0x37 +#define MPU3050_MEM_START_ADDR 0x38 +#define MPU3050_MEM_R_W 0x39 +#define MPU3050_FIFO_COUNT_H 0x3A +#define MPU3050_FIFO_R 0x3C +#define MPU3050_USR_CTRL 0x3D +#define MPU3050_PWR_MGM 0x3E + +/* MPU memory bank read options */ +#define MPU3050_MEM_PRFTCH BIT(5) +#define MPU3050_MEM_USER_BANK BIT(4) +/* Bits 8-11 select memory bank */ +#define MPU3050_MEM_RAM_BANK_0 0 +#define MPU3050_MEM_RAM_BANK_1 1 +#define MPU3050_MEM_RAM_BANK_2 2 +#define MPU3050_MEM_RAM_BANK_3 3 +#define MPU3050_MEM_OTP_BANK_0 4 + +#define MPU3050_AXIS_REGS(axis) (MPU3050_XOUT_H + (axis * 2)) + +/* Register bits */ + +/* FIFO Enable */ +#define MPU3050_FIFO_EN_FOOTER BIT(0) +#define MPU3050_FIFO_EN_AUX_ZOUT BIT(1) +#define MPU3050_FIFO_EN_AUX_YOUT BIT(2) +#define MPU3050_FIFO_EN_AUX_XOUT BIT(3) +#define MPU3050_FIFO_EN_GYRO_ZOUT BIT(4) +#define MPU3050_FIFO_EN_GYRO_YOUT BIT(5) +#define MPU3050_FIFO_EN_GYRO_XOUT BIT(6) +#define MPU3050_FIFO_EN_TEMP_OUT BIT(7) + +/* + * Digital Low Pass filter (DLPF) + * Full Scale (FS) + * and Synchronization + */ +#define MPU3050_EXT_SYNC_NONE 0x00 +#define MPU3050_EXT_SYNC_TEMP 0x20 +#define MPU3050_EXT_SYNC_GYROX 0x40 +#define MPU3050_EXT_SYNC_GYROY 0x60 +#define MPU3050_EXT_SYNC_GYROZ 0x80 +#define MPU3050_EXT_SYNC_ACCELX 0xA0 +#define MPU3050_EXT_SYNC_ACCELY 0xC0 +#define MPU3050_EXT_SYNC_ACCELZ 0xE0 +#define MPU3050_EXT_SYNC_MASK 0xE0 +#define MPU3050_EXT_SYNC_SHIFT 5 + +#define MPU3050_FS_250DPS 0x00 +#define MPU3050_FS_500DPS 0x08 +#define MPU3050_FS_1000DPS 0x10 +#define MPU3050_FS_2000DPS 0x18 +#define MPU3050_FS_MASK 0x18 +#define MPU3050_FS_SHIFT 3 + +#define MPU3050_DLPF_CFG_256HZ_NOLPF2 0x00 +#define MPU3050_DLPF_CFG_188HZ 0x01 +#define MPU3050_DLPF_CFG_98HZ 0x02 +#define MPU3050_DLPF_CFG_42HZ 0x03 +#define MPU3050_DLPF_CFG_20HZ 0x04 +#define MPU3050_DLPF_CFG_10HZ 0x05 +#define MPU3050_DLPF_CFG_5HZ 0x06 +#define MPU3050_DLPF_CFG_2100HZ_NOLPF 0x07 +#define MPU3050_DLPF_CFG_MASK 0x07 +#define MPU3050_DLPF_CFG_SHIFT 0 + +/* Interrupt config */ +#define MPU3050_INT_RAW_RDY_EN BIT(0) +#define MPU3050_INT_DMP_DONE_EN BIT(1) +#define MPU3050_INT_MPU_RDY_EN BIT(2) +#define MPU3050_INT_ANYRD_2CLEAR BIT(4) +#define MPU3050_INT_LATCH_EN BIT(5) +#define MPU3050_INT_OPEN BIT(6) +#define MPU3050_INT_ACTL BIT(7) +/* Interrupt status */ +#define MPU3050_INT_STATUS_RAW_RDY BIT(0) +#define MPU3050_INT_STATUS_DMP_DONE BIT(1) +#define MPU3050_INT_STATUS_MPU_RDY BIT(2) +#define MPU3050_INT_STATUS_FIFO_OVFLW BIT(7) +/* USR_CTRL */ +#define MPU3050_USR_CTRL_FIFO_EN BIT(6) +#define MPU3050_USR_CTRL_AUX_IF_EN BIT(5) +#define MPU3050_USR_CTRL_AUX_IF_RST BIT(3) +#define MPU3050_USR_CTRL_FIFO_RST BIT(1) +#define MPU3050_USR_CTRL_GYRO_RST BIT(0) +/* PWR_MGM */ +#define MPU3050_PWR_MGM_PLL_X 0x01 +#define MPU3050_PWR_MGM_PLL_Y 0x02 +#define MPU3050_PWR_MGM_PLL_Z 0x03 +#define MPU3050_PWR_MGM_CLKSEL_MASK 0x07 +#define MPU3050_PWR_MGM_STBY_ZG BIT(3) +#define MPU3050_PWR_MGM_STBY_YG BIT(4) +#define MPU3050_PWR_MGM_STBY_XG BIT(5) +#define MPU3050_PWR_MGM_SLEEP BIT(6) +#define MPU3050_PWR_MGM_RESET BIT(7) +#define MPU3050_PWR_MGM_MASK 0xff + +/* + * Fullscale precision is (for finest precision) +/- 250 deg/s, so the full + * scale is actually 500 deg/s. All 16 bits are then used to cover this scale, + * in two's complement. + */ +static unsigned int mpu3050_fs_precision[] = { + IIO_DEGREE_TO_RAD(250), + IIO_DEGREE_TO_RAD(500), + IIO_DEGREE_TO_RAD(1000), + IIO_DEGREE_TO_RAD(2000) +}; + +/* + * Regulator names + */ +static const char mpu3050_reg_vdd[] = "vdd"; +static const char mpu3050_reg_vlogic[] = "vlogic"; + +static unsigned int mpu3050_get_freq(struct mpu3050 *mpu3050) +{ + unsigned int freq; + + if (mpu3050->lpf == MPU3050_DLPF_CFG_256HZ_NOLPF2) + freq = 8000; + else + freq = 1000; + freq /= (mpu3050->divisor + 1); + + return freq; +} + +static int mpu3050_start_sampling(struct mpu3050 *mpu3050) +{ + __be16 raw_val[3]; + int ret; + int i; + + /* Reset */ + ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM, + MPU3050_PWR_MGM_RESET, MPU3050_PWR_MGM_RESET); + if (ret) + return ret; + + /* Turn on the Z-axis PLL */ + ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM, + MPU3050_PWR_MGM_CLKSEL_MASK, + MPU3050_PWR_MGM_PLL_Z); + if (ret) + return ret; + + /* Write calibration offset registers */ + for (i = 0; i < 3; i++) + raw_val[i] = cpu_to_be16(mpu3050->calibration[i]); + + ret = regmap_bulk_write(mpu3050->map, MPU3050_X_OFFS_USR_H, raw_val, + sizeof(raw_val)); + if (ret) + return ret; + + /* Set low pass filter (sample rate), sync and full scale */ + ret = regmap_write(mpu3050->map, MPU3050_DLPF_FS_SYNC, + MPU3050_EXT_SYNC_NONE << MPU3050_EXT_SYNC_SHIFT | + mpu3050->fullscale << MPU3050_FS_SHIFT | + mpu3050->lpf << MPU3050_DLPF_CFG_SHIFT); + if (ret) + return ret; + + /* Set up sampling frequency */ + ret = regmap_write(mpu3050->map, MPU3050_SMPLRT_DIV, mpu3050->divisor); + if (ret) + return ret; + + /* + * Max 50 ms start-up time after setting DLPF_FS_SYNC + * according to the data sheet, then wait for the next sample + * at this frequency T = 1000/f ms. + */ + msleep(50 + 1000 / mpu3050_get_freq(mpu3050)); + + return 0; +} + +static int mpu3050_set_8khz_samplerate(struct mpu3050 *mpu3050) +{ + int ret; + u8 divisor; + enum mpu3050_lpf lpf; + + lpf = mpu3050->lpf; + divisor = mpu3050->divisor; + + mpu3050->lpf = LPF_256_HZ_NOLPF; /* 8 kHz base frequency */ + mpu3050->divisor = 0; /* Divide by 1 */ + ret = mpu3050_start_sampling(mpu3050); + + mpu3050->lpf = lpf; + mpu3050->divisor = divisor; + + return ret; +} + +static int mpu3050_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + int ret; + __be16 raw_val; + + switch (mask) { + case IIO_CHAN_INFO_OFFSET: + switch (chan->type) { + case IIO_TEMP: + /* The temperature scaling is (x+23000)/280 Celsius */ + *val = 23000; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_CALIBBIAS: + switch (chan->type) { + case IIO_ANGL_VEL: + *val = mpu3050->calibration[chan->scan_index-1]; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + *val = mpu3050_get_freq(mpu3050); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + /* Millidegrees, see about temperature scaling above */ + *val = 1000; + *val2 = 280; + return IIO_VAL_FRACTIONAL; + case IIO_ANGL_VEL: + /* + * Convert to the corresponding full scale in + * radians. All 16 bits are used with sign to + * span the available scale: to account for the one + * missing value if we multiply by 1/S16_MAX, instead + * multiply with 2/U16_MAX. + */ + *val = mpu3050_fs_precision[mpu3050->fullscale] * 2; + *val2 = U16_MAX; + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_RAW: + /* Resume device */ + pm_runtime_get_sync(mpu3050->dev); + mutex_lock(&mpu3050->lock); + + ret = mpu3050_set_8khz_samplerate(mpu3050); + if (ret) + goto out_read_raw_unlock; + + switch (chan->type) { + case IIO_TEMP: + ret = regmap_bulk_read(mpu3050->map, MPU3050_TEMP_H, + &raw_val, sizeof(raw_val)); + if (ret) { + dev_err(mpu3050->dev, + "error reading temperature\n"); + goto out_read_raw_unlock; + } + + *val = be16_to_cpu(raw_val); + ret = IIO_VAL_INT; + + goto out_read_raw_unlock; + case IIO_ANGL_VEL: + ret = regmap_bulk_read(mpu3050->map, + MPU3050_AXIS_REGS(chan->scan_index-1), + &raw_val, + sizeof(raw_val)); + if (ret) { + dev_err(mpu3050->dev, + "error reading axis data\n"); + goto out_read_raw_unlock; + } + + *val = be16_to_cpu(raw_val); + ret = IIO_VAL_INT; + + goto out_read_raw_unlock; + default: + ret = -EINVAL; + goto out_read_raw_unlock; + } + default: + break; + } + + return -EINVAL; + +out_read_raw_unlock: + mutex_unlock(&mpu3050->lock); + pm_runtime_mark_last_busy(mpu3050->dev); + pm_runtime_put_autosuspend(mpu3050->dev); + + return ret; +} + +static int mpu3050_write_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long mask) +{ + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + /* + * Couldn't figure out a way to precalculate these at compile time. + */ + unsigned int fs250 = + DIV_ROUND_CLOSEST(mpu3050_fs_precision[0] * 1000000 * 2, + U16_MAX); + unsigned int fs500 = + DIV_ROUND_CLOSEST(mpu3050_fs_precision[1] * 1000000 * 2, + U16_MAX); + unsigned int fs1000 = + DIV_ROUND_CLOSEST(mpu3050_fs_precision[2] * 1000000 * 2, + U16_MAX); + unsigned int fs2000 = + DIV_ROUND_CLOSEST(mpu3050_fs_precision[3] * 1000000 * 2, + U16_MAX); + + switch (mask) { + case IIO_CHAN_INFO_CALIBBIAS: + if (chan->type != IIO_ANGL_VEL) + return -EINVAL; + mpu3050->calibration[chan->scan_index-1] = val; + return 0; + case IIO_CHAN_INFO_SAMP_FREQ: + /* + * The max samplerate is 8000 Hz, the minimum + * 1000 / 256 ~= 4 Hz + */ + if (val < 4 || val > 8000) + return -EINVAL; + + /* + * Above 1000 Hz we must turn off the digital low pass filter + * so we get a base frequency of 8kHz to the divider + */ + if (val > 1000) { + mpu3050->lpf = LPF_256_HZ_NOLPF; + mpu3050->divisor = DIV_ROUND_CLOSEST(8000, val) - 1; + return 0; + } + + mpu3050->lpf = LPF_188_HZ; + mpu3050->divisor = DIV_ROUND_CLOSEST(1000, val) - 1; + return 0; + case IIO_CHAN_INFO_SCALE: + if (chan->type != IIO_ANGL_VEL) + return -EINVAL; + /* + * We support +/-250, +/-500, +/-1000 and +/2000 deg/s + * which means we need to round to the closest radians + * which will be roughly +/-4.3, +/-8.7, +/-17.5, +/-35 + * rad/s. The scale is then for the 16 bits used to cover + * it 2/(2^16) of that. + */ + + /* Just too large, set the max range */ + if (val != 0) { + mpu3050->fullscale = FS_2000_DPS; + return 0; + } + + /* + * Now we're dealing with fractions below zero in millirad/s + * do some integer interpolation and match with the closest + * fullscale in the table. + */ + if (val2 <= fs250 || + val2 < ((fs500 + fs250) / 2)) + mpu3050->fullscale = FS_250_DPS; + else if (val2 <= fs500 || + val2 < ((fs1000 + fs500) / 2)) + mpu3050->fullscale = FS_500_DPS; + else if (val2 <= fs1000 || + val2 < ((fs2000 + fs1000) / 2)) + mpu3050->fullscale = FS_1000_DPS; + else + /* Catch-all */ + mpu3050->fullscale = FS_2000_DPS; + return 0; + default: + break; + } + + return -EINVAL; +} + +static irqreturn_t mpu3050_trigger_handler(int irq, void *p) +{ + const struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + int ret; + /* + * Temperature 1*16 bits + * Three axes 3*16 bits + * Timestamp 64 bits (4*16 bits) + * Sum total 8*16 bits + */ + __be16 hw_values[8]; + s64 timestamp; + unsigned int datums_from_fifo = 0; + + /* + * If we're using the hardware trigger, get the precise timestamp from + * the top half of the threaded IRQ handler. Otherwise get the + * timestamp here so it will be close in time to the actual values + * read from the registers. + */ + if (iio_trigger_using_own(indio_dev)) + timestamp = mpu3050->hw_timestamp; + else + timestamp = iio_get_time_ns(indio_dev); + + mutex_lock(&mpu3050->lock); + + /* Using the hardware IRQ trigger? Check the buffer then. */ + if (mpu3050->hw_irq_trigger) { + __be16 raw_fifocnt; + u16 fifocnt; + /* X, Y, Z + temperature */ + unsigned int bytes_per_datum = 8; + bool fifo_overflow = false; + + ret = regmap_bulk_read(mpu3050->map, + MPU3050_FIFO_COUNT_H, + &raw_fifocnt, + sizeof(raw_fifocnt)); + if (ret) + goto out_trigger_unlock; + fifocnt = be16_to_cpu(raw_fifocnt); + + if (fifocnt == 512) { + dev_info(mpu3050->dev, + "FIFO overflow! Emptying and resetting FIFO\n"); + fifo_overflow = true; + /* Reset and enable the FIFO */ + ret = regmap_update_bits(mpu3050->map, + MPU3050_USR_CTRL, + MPU3050_USR_CTRL_FIFO_EN | + MPU3050_USR_CTRL_FIFO_RST, + MPU3050_USR_CTRL_FIFO_EN | + MPU3050_USR_CTRL_FIFO_RST); + if (ret) { + dev_info(mpu3050->dev, "error resetting FIFO\n"); + goto out_trigger_unlock; + } + mpu3050->pending_fifo_footer = false; + } + + if (fifocnt) + dev_dbg(mpu3050->dev, + "%d bytes in the FIFO\n", + fifocnt); + + while (!fifo_overflow && fifocnt > bytes_per_datum) { + unsigned int toread; + unsigned int offset; + __be16 fifo_values[5]; + + /* + * If there is a FIFO footer in the pipe, first clear + * that out. This follows the complex algorithm in the + * datasheet that states that you may never leave the + * FIFO empty after the first reading: you have to + * always leave two footer bytes in it. The footer is + * in practice just two zero bytes. + */ + if (mpu3050->pending_fifo_footer) { + toread = bytes_per_datum + 2; + offset = 0; + } else { + toread = bytes_per_datum; + offset = 1; + /* Put in some dummy value */ + fifo_values[0] = 0xAAAA; + } + + ret = regmap_bulk_read(mpu3050->map, + MPU3050_FIFO_R, + &fifo_values[offset], + toread); + + dev_dbg(mpu3050->dev, + "%04x %04x %04x %04x %04x\n", + fifo_values[0], + fifo_values[1], + fifo_values[2], + fifo_values[3], + fifo_values[4]); + + /* Index past the footer (fifo_values[0]) and push */ + iio_push_to_buffers_with_timestamp(indio_dev, + &fifo_values[1], + timestamp); + + fifocnt -= toread; + datums_from_fifo++; + mpu3050->pending_fifo_footer = true; + + /* + * If we're emptying the FIFO, just make sure to + * check if something new appeared. + */ + if (fifocnt < bytes_per_datum) { + ret = regmap_bulk_read(mpu3050->map, + MPU3050_FIFO_COUNT_H, + &raw_fifocnt, + sizeof(raw_fifocnt)); + if (ret) + goto out_trigger_unlock; + fifocnt = be16_to_cpu(raw_fifocnt); + } + + if (fifocnt < bytes_per_datum) + dev_dbg(mpu3050->dev, + "%d bytes left in the FIFO\n", + fifocnt); + + /* + * At this point, the timestamp that triggered the + * hardware interrupt is no longer valid for what + * we are reading (the interrupt likely fired for + * the value on the top of the FIFO), so set the + * timestamp to zero and let userspace deal with it. + */ + timestamp = 0; + } + } + + /* + * If we picked some datums from the FIFO that's enough, else + * fall through and just read from the current value registers. + * This happens in two cases: + * + * - We are using some other trigger (external, like an HRTimer) + * than the sensor's own sample generator. In this case the + * sensor is just set to the max sampling frequency and we give + * the trigger a copy of the latest value every time we get here. + * + * - The hardware trigger is active but unused and we actually use + * another trigger which calls here with a frequency higher + * than what the device provides data. We will then just read + * duplicate values directly from the hardware registers. + */ + if (datums_from_fifo) { + dev_dbg(mpu3050->dev, + "read %d datums from the FIFO\n", + datums_from_fifo); + goto out_trigger_unlock; + } + + ret = regmap_bulk_read(mpu3050->map, MPU3050_TEMP_H, &hw_values, + sizeof(hw_values)); + if (ret) { + dev_err(mpu3050->dev, + "error reading axis data\n"); + goto out_trigger_unlock; + } + + iio_push_to_buffers_with_timestamp(indio_dev, hw_values, timestamp); + +out_trigger_unlock: + mutex_unlock(&mpu3050->lock); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int mpu3050_buffer_preenable(struct iio_dev *indio_dev) +{ + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + + pm_runtime_get_sync(mpu3050->dev); + + /* Unless we have OUR trigger active, run at full speed */ + if (!mpu3050->hw_irq_trigger) + return mpu3050_set_8khz_samplerate(mpu3050); + + return 0; +} + +static int mpu3050_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + + pm_runtime_mark_last_busy(mpu3050->dev); + pm_runtime_put_autosuspend(mpu3050->dev); + + return 0; +} + +static const struct iio_buffer_setup_ops mpu3050_buffer_setup_ops = { + .preenable = mpu3050_buffer_preenable, + .postenable = iio_triggered_buffer_postenable, + .predisable = iio_triggered_buffer_predisable, + .postdisable = mpu3050_buffer_postdisable, +}; + +static const struct iio_mount_matrix * +mpu3050_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + + return &mpu3050->orientation; +} + +static const struct iio_chan_spec_ext_info mpu3050_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, mpu3050_get_mount_matrix), + { }, +}; + +#define MPU3050_AXIS_CHANNEL(axis, index) \ + { \ + .type = IIO_ANGL_VEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_CALIBBIAS), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ + .ext_info = mpu3050_ext_info, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ + } + +static const struct iio_chan_spec mpu3050_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, + }, + MPU3050_AXIS_CHANNEL(X, 1), + MPU3050_AXIS_CHANNEL(Y, 2), + MPU3050_AXIS_CHANNEL(Z, 3), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +/* Four channels apart from timestamp, scan mask = 0x0f */ +static const unsigned long mpu3050_scan_masks[] = { 0xf, 0 }; + +/* + * These are just the hardcoded factors resulting from the more elaborate + * calculations done with fractions in the scale raw get/set functions. + */ +static IIO_CONST_ATTR(anglevel_scale_available, + "0.000122070 " + "0.000274658 " + "0.000518798 " + "0.001068115"); + +static struct attribute *mpu3050_attributes[] = { + &iio_const_attr_anglevel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group mpu3050_attribute_group = { + .attrs = mpu3050_attributes, +}; + +static const struct iio_info mpu3050_info = { + .driver_module = THIS_MODULE, + .read_raw = mpu3050_read_raw, + .write_raw = mpu3050_write_raw, + .attrs = &mpu3050_attribute_group, + .driver_module = THIS_MODULE, +}; + +/** + * mpu3050_read_mem() - read MPU-3050 internal memory + * @mpu3050: device to read from + * @bank: target bank + * @addr: target address + * @len: number of bytes + * @buf: the buffer to store the read bytes in + */ +static int mpu3050_read_mem(struct mpu3050 *mpu3050, + u8 bank, + u8 addr, + u8 len, + u8 *buf) +{ + int ret; + + ret = regmap_write(mpu3050->map, + MPU3050_BANK_SEL, + bank); + if (ret) + return ret; + + ret = regmap_write(mpu3050->map, + MPU3050_MEM_START_ADDR, + addr); + if (ret) + return ret; + + return regmap_bulk_read(mpu3050->map, + MPU3050_MEM_R_W, + buf, + len); +} + +static int mpu3050_hw_init(struct mpu3050 *mpu3050) +{ + int ret; + u8 otp[8]; + + /* Reset */ + ret = regmap_update_bits(mpu3050->map, + MPU3050_PWR_MGM, + MPU3050_PWR_MGM_RESET, + MPU3050_PWR_MGM_RESET); + if (ret) + return ret; + + /* Turn on the PLL */ + ret = regmap_update_bits(mpu3050->map, + MPU3050_PWR_MGM, + MPU3050_PWR_MGM_CLKSEL_MASK, + MPU3050_PWR_MGM_PLL_Z); + if (ret) + return ret; + + /* Disable IRQs */ + ret = regmap_write(mpu3050->map, + MPU3050_INT_CFG, + 0); + if (ret) + return ret; + + /* Read out the 8 bytes of OTP (one-time-programmable) memory */ + ret = mpu3050_read_mem(mpu3050, + (MPU3050_MEM_PRFTCH | + MPU3050_MEM_USER_BANK | + MPU3050_MEM_OTP_BANK_0), + 0, + sizeof(otp), + otp); + if (ret) + return ret; + + /* This is device-unique data so it goes into the entropy pool */ + add_device_randomness(otp, sizeof(otp)); + + dev_info(mpu3050->dev, + "die ID: %04X, wafer ID: %02X, A lot ID: %04X, " + "W lot ID: %03X, WP ID: %01X, rev ID: %02X\n", + /* Die ID, bits 0-12 */ + (otp[1] << 8 | otp[0]) & 0x1fff, + /* Wafer ID, bits 13-17 */ + ((otp[2] << 8 | otp[1]) & 0x03e0) >> 5, + /* A lot ID, bits 18-33 */ + ((otp[4] << 16 | otp[3] << 8 | otp[2]) & 0x3fffc) >> 2, + /* W lot ID, bits 34-45 */ + ((otp[5] << 8 | otp[4]) & 0x3ffc) >> 2, + /* WP ID, bits 47-49 */ + ((otp[6] << 8 | otp[5]) & 0x0380) >> 7, + /* rev ID, bits 50-55 */ + otp[6] >> 2); + + return 0; +} + +static int mpu3050_power_up(struct mpu3050 *mpu3050) +{ + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs); + if (ret) { + dev_err(mpu3050->dev, "cannot enable regulators\n"); + return ret; + } + /* + * 20-100 ms start-up time for register read/write according to + * the datasheet, be on the safe side and wait 200 ms. + */ + msleep(200); + + /* Take device out of sleep mode */ + ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM, + MPU3050_PWR_MGM_SLEEP, 0); + if (ret) { + dev_err(mpu3050->dev, "error setting power mode\n"); + return ret; + } + msleep(10); + + return 0; +} + +static int mpu3050_power_down(struct mpu3050 *mpu3050) +{ + int ret; + + /* + * Put MPU-3050 into sleep mode before cutting regulators. + * This is important, because we may not be the sole user + * of the regulator so the power may stay on after this, and + * then we would be wasting power unless we go to sleep mode + * first. + */ + ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM, + MPU3050_PWR_MGM_SLEEP, MPU3050_PWR_MGM_SLEEP); + if (ret) + dev_err(mpu3050->dev, "error putting to sleep\n"); + + ret = regulator_bulk_disable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs); + if (ret) + dev_err(mpu3050->dev, "error disabling regulators\n"); + + return 0; +} + +static irqreturn_t mpu3050_irq_handler(int irq, void *p) +{ + struct iio_trigger *trig = p; + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + + if (!mpu3050->hw_irq_trigger) + return IRQ_NONE; + + /* Get the time stamp as close in time as possible */ + mpu3050->hw_timestamp = iio_get_time_ns(indio_dev); + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t mpu3050_irq_thread(int irq, void *p) +{ + struct iio_trigger *trig = p; + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + unsigned int val; + int ret; + + /* ACK IRQ and check if it was from us */ + ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val); + if (ret) { + dev_err(mpu3050->dev, "error reading IRQ status\n"); + return IRQ_HANDLED; + } + if (!(val & MPU3050_INT_STATUS_RAW_RDY)) + return IRQ_NONE; + + iio_trigger_poll_chained(p); + + return IRQ_HANDLED; +} + +/** + * mpu3050_drdy_trigger_set_state() - set data ready interrupt state + * @trig: trigger instance + * @enable: true if trigger should be enabled, false to disable + */ +static int mpu3050_drdy_trigger_set_state(struct iio_trigger *trig, + bool enable) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + unsigned int val; + int ret; + + /* Disabling trigger: disable interrupt and return */ + if (!enable) { + /* Disable all interrupts */ + ret = regmap_write(mpu3050->map, + MPU3050_INT_CFG, + 0); + if (ret) + dev_err(mpu3050->dev, "error disabling IRQ\n"); + + /* Clear IRQ flag */ + ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val); + if (ret) + dev_err(mpu3050->dev, "error clearing IRQ status\n"); + + /* Disable all things in the FIFO and reset it */ + ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN, 0); + if (ret) + dev_err(mpu3050->dev, "error disabling FIFO\n"); + + ret = regmap_write(mpu3050->map, MPU3050_USR_CTRL, + MPU3050_USR_CTRL_FIFO_RST); + if (ret) + dev_err(mpu3050->dev, "error resetting FIFO\n"); + + pm_runtime_mark_last_busy(mpu3050->dev); + pm_runtime_put_autosuspend(mpu3050->dev); + mpu3050->hw_irq_trigger = false; + + return 0; + } else { + /* Else we're enabling the trigger from this point */ + pm_runtime_get_sync(mpu3050->dev); + mpu3050->hw_irq_trigger = true; + + /* Disable all things in the FIFO */ + ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN, 0); + if (ret) + return ret; + + /* Reset and enable the FIFO */ + ret = regmap_update_bits(mpu3050->map, MPU3050_USR_CTRL, + MPU3050_USR_CTRL_FIFO_EN | + MPU3050_USR_CTRL_FIFO_RST, + MPU3050_USR_CTRL_FIFO_EN | + MPU3050_USR_CTRL_FIFO_RST); + if (ret) + return ret; + + mpu3050->pending_fifo_footer = false; + + /* Turn on the FIFO for temp+X+Y+Z */ + ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN, + MPU3050_FIFO_EN_TEMP_OUT | + MPU3050_FIFO_EN_GYRO_XOUT | + MPU3050_FIFO_EN_GYRO_YOUT | + MPU3050_FIFO_EN_GYRO_ZOUT | + MPU3050_FIFO_EN_FOOTER); + if (ret) + return ret; + + /* Configure the sample engine */ + ret = mpu3050_start_sampling(mpu3050); + if (ret) + return ret; + + /* Clear IRQ flag */ + ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val); + if (ret) + dev_err(mpu3050->dev, "error clearing IRQ status\n"); + + /* Give us interrupts whenever there is new data ready */ + val = MPU3050_INT_RAW_RDY_EN; + + if (mpu3050->irq_actl) + val |= MPU3050_INT_ACTL; + if (mpu3050->irq_latch) + val |= MPU3050_INT_LATCH_EN; + if (mpu3050->irq_opendrain) + val |= MPU3050_INT_OPEN; + + ret = regmap_write(mpu3050->map, MPU3050_INT_CFG, val); + if (ret) + return ret; + } + + return 0; +} + +static const struct iio_trigger_ops mpu3050_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = mpu3050_drdy_trigger_set_state, +}; + +static int mpu3050_trigger_probe(struct iio_dev *indio_dev, int irq) +{ + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + unsigned long irq_trig; + int ret; + + mpu3050->trig = devm_iio_trigger_alloc(&indio_dev->dev, + "%s-dev%d", + indio_dev->name, + indio_dev->id); + if (!mpu3050->trig) + return -ENOMEM; + + /* Check if IRQ is open drain */ + if (of_property_read_bool(mpu3050->dev->of_node, "drive-open-drain")) + mpu3050->irq_opendrain = true; + + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + /* + * Configure the interrupt generator hardware to supply whatever + * the interrupt is configured for, edges low/high level low/high, + * we can provide it all. + */ + switch (irq_trig) { + case IRQF_TRIGGER_RISING: + dev_info(&indio_dev->dev, + "pulse interrupts on the rising edge\n"); + if (mpu3050->irq_opendrain) { + dev_info(&indio_dev->dev, + "rising edge incompatible with open drain\n"); + mpu3050->irq_opendrain = false; + } + break; + case IRQF_TRIGGER_FALLING: + mpu3050->irq_actl = true; + dev_info(&indio_dev->dev, + "pulse interrupts on the falling edge\n"); + break; + case IRQF_TRIGGER_HIGH: + mpu3050->irq_latch = true; + dev_info(&indio_dev->dev, + "interrupts active high level\n"); + if (mpu3050->irq_opendrain) { + dev_info(&indio_dev->dev, + "active high incompatible with open drain\n"); + mpu3050->irq_opendrain = false; + } + /* + * With level IRQs, we mask the IRQ until it is processed, + * but with edge IRQs (pulses) we can queue several interrupts + * in the top half. + */ + irq_trig |= IRQF_ONESHOT; + break; + case IRQF_TRIGGER_LOW: + mpu3050->irq_latch = true; + mpu3050->irq_actl = true; + irq_trig |= IRQF_ONESHOT; + dev_info(&indio_dev->dev, + "interrupts active low level\n"); + break; + default: + /* This is the most preferred mode, if possible */ + dev_err(&indio_dev->dev, + "unsupported IRQ trigger specified (%lx), enforce " + "rising edge\n", irq_trig); + irq_trig = IRQF_TRIGGER_RISING; + break; + } + + /* An open drain line can be shared with several devices */ + if (mpu3050->irq_opendrain) + irq_trig |= IRQF_SHARED; + + ret = request_threaded_irq(irq, + mpu3050_irq_handler, + mpu3050_irq_thread, + irq_trig, + mpu3050->trig->name, + mpu3050->trig); + if (ret) { + dev_err(mpu3050->dev, + "can't get IRQ %d, error %d\n", irq, ret); + return ret; + } + + mpu3050->irq = irq; + mpu3050->trig->dev.parent = mpu3050->dev; + mpu3050->trig->ops = &mpu3050_trigger_ops; + iio_trigger_set_drvdata(mpu3050->trig, indio_dev); + + ret = iio_trigger_register(mpu3050->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(mpu3050->trig); + + return 0; +} + +int mpu3050_common_probe(struct device *dev, + struct regmap *map, + int irq, + const char *name) +{ + struct iio_dev *indio_dev; + struct mpu3050 *mpu3050; + unsigned int val; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*mpu3050)); + if (!indio_dev) + return -ENOMEM; + mpu3050 = iio_priv(indio_dev); + + mpu3050->dev = dev; + mpu3050->map = map; + mutex_init(&mpu3050->lock); + /* Default fullscale: 2000 degrees per second */ + mpu3050->fullscale = FS_2000_DPS; + /* 1 kHz, divide by 100, default frequency = 10 Hz */ + mpu3050->lpf = MPU3050_DLPF_CFG_188HZ; + mpu3050->divisor = 99; + + /* Read the mounting matrix, if present */ + ret = of_iio_read_mount_matrix(dev, "mount-matrix", + &mpu3050->orientation); + if (ret) + return ret; + + /* Fetch and turn on regulators */ + mpu3050->regs[0].supply = mpu3050_reg_vdd; + mpu3050->regs[1].supply = mpu3050_reg_vlogic; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(mpu3050->regs), + mpu3050->regs); + if (ret) { + dev_err(dev, "Cannot get regulators\n"); + return ret; + } + + ret = mpu3050_power_up(mpu3050); + if (ret) + return ret; + + ret = regmap_read(map, MPU3050_CHIP_ID_REG, &val); + if (ret) { + dev_err(dev, "could not read device ID\n"); + ret = -ENODEV; + + goto err_power_down; + } + + if (val != MPU3050_CHIP_ID) { + dev_err(dev, "unsupported chip id %02x\n", (u8)val); + ret = -ENODEV; + goto err_power_down; + } + + ret = regmap_read(map, MPU3050_PRODUCT_ID_REG, &val); + if (ret) { + dev_err(dev, "could not read device ID\n"); + ret = -ENODEV; + + goto err_power_down; + } + dev_info(dev, "found MPU-3050 part no: %d, version: %d\n", + ((val >> 4) & 0xf), (val & 0xf)); + + ret = mpu3050_hw_init(mpu3050); + if (ret) + goto err_power_down; + + indio_dev->dev.parent = dev; + indio_dev->channels = mpu3050_channels; + indio_dev->num_channels = ARRAY_SIZE(mpu3050_channels); + indio_dev->info = &mpu3050_info; + indio_dev->available_scan_masks = mpu3050_scan_masks; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = name; + + ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, + mpu3050_trigger_handler, + &mpu3050_buffer_setup_ops); + if (ret) { + dev_err(dev, "triggered buffer setup failed\n"); + goto err_power_down; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "device register failed\n"); + goto err_cleanup_buffer; + } + + dev_set_drvdata(dev, indio_dev); + + /* Check if we have an assigned IRQ to use as trigger */ + if (irq) { + ret = mpu3050_trigger_probe(indio_dev, irq); + if (ret) + dev_err(dev, "failed to register trigger\n"); + } + + /* Enable runtime PM */ + pm_runtime_get_noresume(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + /* + * Set autosuspend to two orders of magnitude larger than the + * start-up time. 100ms start-up time means 10000ms autosuspend, + * i.e. 10 seconds. + */ + pm_runtime_set_autosuspend_delay(dev, 10000); + pm_runtime_use_autosuspend(dev); + pm_runtime_put(dev); + + return 0; + +err_cleanup_buffer: + iio_triggered_buffer_cleanup(indio_dev); +err_power_down: + mpu3050_power_down(mpu3050); + + return ret; +} +EXPORT_SYMBOL(mpu3050_common_probe); + +int mpu3050_common_remove(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + + pm_runtime_get_sync(dev); + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + iio_triggered_buffer_cleanup(indio_dev); + if (mpu3050->irq) + free_irq(mpu3050->irq, mpu3050); + iio_device_unregister(indio_dev); + mpu3050_power_down(mpu3050); + + return 0; +} +EXPORT_SYMBOL(mpu3050_common_remove); + +#ifdef CONFIG_PM +static int mpu3050_runtime_suspend(struct device *dev) +{ + return mpu3050_power_down(iio_priv(dev_get_drvdata(dev))); +} + +static int mpu3050_runtime_resume(struct device *dev) +{ + return mpu3050_power_up(iio_priv(dev_get_drvdata(dev))); +} +#endif /* CONFIG_PM */ + +const struct dev_pm_ops mpu3050_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(mpu3050_runtime_suspend, + mpu3050_runtime_resume, NULL) +}; +EXPORT_SYMBOL(mpu3050_dev_pm_ops); + +MODULE_AUTHOR("Linus Walleij"); +MODULE_DESCRIPTION("MPU3050 gyroscope driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c new file mode 100644 index 000000000000..06007200bf49 --- /dev/null +++ b/drivers/iio/gyro/mpu3050-i2c.c @@ -0,0 +1,124 @@ +#include +#include +#include +#include +#include +#include +#include + +#include "mpu3050.h" + +static const struct regmap_config mpu3050_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int mpu3050_i2c_bypass_select(struct i2c_mux_core *mux, u32 chan_id) +{ + struct mpu3050 *mpu3050 = i2c_mux_priv(mux); + + /* Just power up the device, that is all that is needed */ + pm_runtime_get_sync(mpu3050->dev); + return 0; +} + +static int mpu3050_i2c_bypass_deselect(struct i2c_mux_core *mux, u32 chan_id) +{ + struct mpu3050 *mpu3050 = i2c_mux_priv(mux); + + pm_runtime_mark_last_busy(mpu3050->dev); + pm_runtime_put_autosuspend(mpu3050->dev); + return 0; +} + +static int mpu3050_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const char *name; + struct mpu3050 *mpu3050; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_I2C_BLOCK)) + return -EOPNOTSUPP; + + if (id) + name = id->name; + else + return -ENODEV; + + regmap = devm_regmap_init_i2c(client, &mpu3050_i2c_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to register i2c regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + ret = mpu3050_common_probe(&client->dev, regmap, client->irq, name); + if (ret) + return ret; + + /* The main driver is up, now register the I2C mux */ + mpu3050 = iio_priv(dev_get_drvdata(&client->dev)); + mpu3050->i2cmux = i2c_mux_alloc(client->adapter, &client->dev, + 1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE, + mpu3050_i2c_bypass_select, + mpu3050_i2c_bypass_deselect); + /* Just fail the mux, there is no point in killing the driver */ + if (!mpu3050->i2cmux) + dev_err(&client->dev, "failed to allocate I2C mux\n"); + else { + mpu3050->i2cmux->priv = mpu3050; + ret = i2c_mux_add_adapter(mpu3050->i2cmux, 0, 0, 0); + if (ret) + dev_err(&client->dev, "failed to add I2C mux\n"); + } + + return 0; +} + +static int mpu3050_i2c_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = dev_get_drvdata(&client->dev); + struct mpu3050 *mpu3050 = iio_priv(indio_dev); + + if (mpu3050->i2cmux) + i2c_mux_del_adapters(mpu3050->i2cmux); + + return mpu3050_common_remove(&client->dev); +} + +/* + * device id table is used to identify what device can be + * supported by this driver + */ +static const struct i2c_device_id mpu3050_i2c_id[] = { + { "mpu3050" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, mpu3050_i2c_id); + +static const struct of_device_id mpu3050_i2c_of_match[] = { + { .compatible = "invensense,mpu3050", .data = "mpu3050" }, + /* Deprecated vendor ID from the Input driver */ + { .compatible = "invn,mpu3050", .data = "mpu3050" }, + { }, +}; +MODULE_DEVICE_TABLE(of, mpu3050_i2c_of_match); + +static struct i2c_driver mpu3050_i2c_driver = { + .probe = mpu3050_i2c_probe, + .remove = mpu3050_i2c_remove, + .id_table = mpu3050_i2c_id, + .driver = { + .of_match_table = mpu3050_i2c_of_match, + .name = "mpu3050-i2c", + .pm = &mpu3050_dev_pm_ops, + }, +}; +module_i2c_driver(mpu3050_i2c_driver); + +MODULE_AUTHOR("Linus Walleij"); +MODULE_DESCRIPTION("Invensense MPU3050 gyroscope driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/gyro/mpu3050.h b/drivers/iio/gyro/mpu3050.h new file mode 100644 index 000000000000..bef87a714dc5 --- /dev/null +++ b/drivers/iio/gyro/mpu3050.h @@ -0,0 +1,96 @@ +#include +#include +#include +#include +#include + +/** + * enum mpu3050_fullscale - indicates the full range of the sensor in deg/sec + */ +enum mpu3050_fullscale { + FS_250_DPS = 0, + FS_500_DPS, + FS_1000_DPS, + FS_2000_DPS, +}; + +/** + * enum mpu3050_lpf - indicates the low pass filter width + */ +enum mpu3050_lpf { + /* This implicity sets sample frequency to 8 kHz */ + LPF_256_HZ_NOLPF = 0, + /* All others sets the sample frequency to 1 kHz */ + LPF_188_HZ, + LPF_98_HZ, + LPF_42_HZ, + LPF_20_HZ, + LPF_10_HZ, + LPF_5_HZ, + LPF_2100_HZ_NOLPF, +}; + +enum mpu3050_axis { + AXIS_X = 0, + AXIS_Y, + AXIS_Z, + AXIS_MAX, +}; + +/** + * struct mpu3050 - instance state container for the device + * @dev: parent device for this instance + * @orientation: mounting matrix, flipped axis etc + * @map: regmap to reach the registers + * @lock: serialization lock to marshal all requests + * @irq: the IRQ used for this device + * @regs: the regulators to power this device + * @fullscale: the current fullscale setting for the device + * @lpf: digital low pass filter setting for the device + * @divisor: base frequency divider: divides 8 or 1 kHz + * @calibration: the three signed 16-bit calibration settings that + * get written into the offset registers for each axis to compensate + * for DC offsets + * @trig: trigger for the MPU-3050 interrupt, if present + * @hw_irq_trigger: hardware interrupt trigger is in use + * @irq_actl: interrupt is active low + * @irq_latch: latched IRQ, this means that it is a level IRQ + * @irq_opendrain: the interrupt line shall be configured open drain + * @pending_fifo_footer: tells us if there is a pending footer in the FIFO + * that we have to read out first when handling the FIFO + * @hw_timestamp: latest hardware timestamp from the trigger IRQ, when in + * use + * @i2cmux: an I2C mux reflecting the fact that this sensor is a hub with + * a pass-through I2C interface coming out of it: this device needs to be + * powered up in order to reach devices on the other side of this mux + */ +struct mpu3050 { + struct device *dev; + struct iio_mount_matrix orientation; + struct regmap *map; + struct mutex lock; + int irq; + struct regulator_bulk_data regs[2]; + enum mpu3050_fullscale fullscale; + enum mpu3050_lpf lpf; + u8 divisor; + s16 calibration[3]; + struct iio_trigger *trig; + bool hw_irq_trigger; + bool irq_actl; + bool irq_latch; + bool irq_opendrain; + bool pending_fifo_footer; + s64 hw_timestamp; + struct i2c_mux_core *i2cmux; +}; + +/* Probe called from different transports */ +int mpu3050_common_probe(struct device *dev, + struct regmap *map, + int irq, + const char *name); +int mpu3050_common_remove(struct device *dev); + +/* PM ops */ +extern const struct dev_pm_ops mpu3050_dev_pm_ops;