mirror of
https://github.com/torvalds/linux.git
synced 2024-11-17 01:22:07 +00:00
tty: serial: fsl_lpuart: add 32-bit register interface support
This add the 32-bit register version LPUART support with big-endian byte order. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Jingchang Lu
Greg Kroah-Hartman
parent
876496b8cd
commit
380c966c09
@ -1,7 +1,7 @@
|
||||
/*
|
||||
* Freescale lpuart serial port driver
|
||||
*
|
||||
* Copyright 2012-2013 Freescale Semiconductor, Inc.
|
||||
* Copyright 2012-2014 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
@ -117,6 +117,113 @@
|
||||
#define UARTSFIFO_TXOF 0x02
|
||||
#define UARTSFIFO_RXUF 0x01
|
||||
|
||||
/* 32-bit register defination */
|
||||
#define UARTBAUD 0x00
|
||||
#define UARTSTAT 0x04
|
||||
#define UARTCTRL 0x08
|
||||
#define UARTDATA 0x0C
|
||||
#define UARTMATCH 0x10
|
||||
#define UARTMODIR 0x14
|
||||
#define UARTFIFO 0x18
|
||||
#define UARTWATER 0x1c
|
||||
|
||||
#define UARTBAUD_MAEN1 0x80000000
|
||||
#define UARTBAUD_MAEN2 0x40000000
|
||||
#define UARTBAUD_M10 0x20000000
|
||||
#define UARTBAUD_TDMAE 0x00800000
|
||||
#define UARTBAUD_RDMAE 0x00200000
|
||||
#define UARTBAUD_MATCFG 0x00400000
|
||||
#define UARTBAUD_BOTHEDGE 0x00020000
|
||||
#define UARTBAUD_RESYNCDIS 0x00010000
|
||||
#define UARTBAUD_LBKDIE 0x00008000
|
||||
#define UARTBAUD_RXEDGIE 0x00004000
|
||||
#define UARTBAUD_SBNS 0x00002000
|
||||
#define UARTBAUD_SBR 0x00000000
|
||||
#define UARTBAUD_SBR_MASK 0x1fff
|
||||
|
||||
#define UARTSTAT_LBKDIF 0x80000000
|
||||
#define UARTSTAT_RXEDGIF 0x40000000
|
||||
#define UARTSTAT_MSBF 0x20000000
|
||||
#define UARTSTAT_RXINV 0x10000000
|
||||
#define UARTSTAT_RWUID 0x08000000
|
||||
#define UARTSTAT_BRK13 0x04000000
|
||||
#define UARTSTAT_LBKDE 0x02000000
|
||||
#define UARTSTAT_RAF 0x01000000
|
||||
#define UARTSTAT_TDRE 0x00800000
|
||||
#define UARTSTAT_TC 0x00400000
|
||||
#define UARTSTAT_RDRF 0x00200000
|
||||
#define UARTSTAT_IDLE 0x00100000
|
||||
#define UARTSTAT_OR 0x00080000
|
||||
#define UARTSTAT_NF 0x00040000
|
||||
#define UARTSTAT_FE 0x00020000
|
||||
#define UARTSTAT_PE 0x00010000
|
||||
#define UARTSTAT_MA1F 0x00008000
|
||||
#define UARTSTAT_M21F 0x00004000
|
||||
|
||||
#define UARTCTRL_R8T9 0x80000000
|
||||
#define UARTCTRL_R9T8 0x40000000
|
||||
#define UARTCTRL_TXDIR 0x20000000
|
||||
#define UARTCTRL_TXINV 0x10000000
|
||||
#define UARTCTRL_ORIE 0x08000000
|
||||
#define UARTCTRL_NEIE 0x04000000
|
||||
#define UARTCTRL_FEIE 0x02000000
|
||||
#define UARTCTRL_PEIE 0x01000000
|
||||
#define UARTCTRL_TIE 0x00800000
|
||||
#define UARTCTRL_TCIE 0x00400000
|
||||
#define UARTCTRL_RIE 0x00200000
|
||||
#define UARTCTRL_ILIE 0x00100000
|
||||
#define UARTCTRL_TE 0x00080000
|
||||
#define UARTCTRL_RE 0x00040000
|
||||
#define UARTCTRL_RWU 0x00020000
|
||||
#define UARTCTRL_SBK 0x00010000
|
||||
#define UARTCTRL_MA1IE 0x00008000
|
||||
#define UARTCTRL_MA2IE 0x00004000
|
||||
#define UARTCTRL_IDLECFG 0x00000100
|
||||
#define UARTCTRL_LOOPS 0x00000080
|
||||
#define UARTCTRL_DOZEEN 0x00000040
|
||||
#define UARTCTRL_RSRC 0x00000020
|
||||
#define UARTCTRL_M 0x00000010
|
||||
#define UARTCTRL_WAKE 0x00000008
|
||||
#define UARTCTRL_ILT 0x00000004
|
||||
#define UARTCTRL_PE 0x00000002
|
||||
#define UARTCTRL_PT 0x00000001
|
||||
|
||||
#define UARTDATA_NOISY 0x00008000
|
||||
#define UARTDATA_PARITYE 0x00004000
|
||||
#define UARTDATA_FRETSC 0x00002000
|
||||
#define UARTDATA_RXEMPT 0x00001000
|
||||
#define UARTDATA_IDLINE 0x00000800
|
||||
#define UARTDATA_MASK 0x3ff
|
||||
|
||||
#define UARTMODIR_IREN 0x00020000
|
||||
#define UARTMODIR_TXCTSSRC 0x00000020
|
||||
#define UARTMODIR_TXCTSC 0x00000010
|
||||
#define UARTMODIR_RXRTSE 0x00000008
|
||||
#define UARTMODIR_TXRTSPOL 0x00000004
|
||||
#define UARTMODIR_TXRTSE 0x00000002
|
||||
#define UARTMODIR_TXCTSE 0x00000001
|
||||
|
||||
#define UARTFIFO_TXEMPT 0x00800000
|
||||
#define UARTFIFO_RXEMPT 0x00400000
|
||||
#define UARTFIFO_TXOF 0x00020000
|
||||
#define UARTFIFO_RXUF 0x00010000
|
||||
#define UARTFIFO_TXFLUSH 0x00008000
|
||||
#define UARTFIFO_RXFLUSH 0x00004000
|
||||
#define UARTFIFO_TXOFE 0x00000200
|
||||
#define UARTFIFO_RXUFE 0x00000100
|
||||
#define UARTFIFO_TXFE 0x00000080
|
||||
#define UARTFIFO_FIFOSIZE_MASK 0x7
|
||||
#define UARTFIFO_TXSIZE_OFF 4
|
||||
#define UARTFIFO_RXFE 0x00000008
|
||||
#define UARTFIFO_RXSIZE_OFF 0
|
||||
|
||||
#define UARTWATER_COUNT_MASK 0xff
|
||||
#define UARTWATER_TXCNT_OFF 8
|
||||
#define UARTWATER_RXCNT_OFF 24
|
||||
#define UARTWATER_WATER_MASK 0xff
|
||||
#define UARTWATER_TXWATER_OFF 0
|
||||
#define UARTWATER_RXWATER_OFF 16
|
||||
|
||||
#define FSL_UART_RX_DMA_BUFFER_SIZE 64
|
||||
|
||||
#define DRIVER_NAME "fsl-lpuart"
|
||||
@ -128,6 +235,7 @@ struct lpuart_port {
|
||||
struct clk *clk;
|
||||
unsigned int txfifo_size;
|
||||
unsigned int rxfifo_size;
|
||||
bool lpuart32;
|
||||
|
||||
bool lpuart_dma_use;
|
||||
struct dma_chan *dma_tx_chan;
|
||||
@ -152,6 +260,9 @@ static struct of_device_id lpuart_dt_ids[] = {
|
||||
{
|
||||
.compatible = "fsl,vf610-lpuart",
|
||||
},
|
||||
{
|
||||
.compatible = "fsl,ls1021a-lpuart",
|
||||
},
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
|
||||
@ -160,6 +271,16 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
|
||||
static void lpuart_dma_tx_complete(void *arg);
|
||||
static void lpuart_dma_rx_complete(void *arg);
|
||||
|
||||
static u32 lpuart32_read(void __iomem *addr)
|
||||
{
|
||||
return ioread32be(addr);
|
||||
}
|
||||
|
||||
static void lpuart32_write(u32 val, void __iomem *addr)
|
||||
{
|
||||
iowrite32be(val, addr);
|
||||
}
|
||||
|
||||
static void lpuart_stop_tx(struct uart_port *port)
|
||||
{
|
||||
unsigned char temp;
|
||||
@ -169,6 +290,15 @@ static void lpuart_stop_tx(struct uart_port *port)
|
||||
writeb(temp, port->membase + UARTCR2);
|
||||
}
|
||||
|
||||
static void lpuart32_stop_tx(struct uart_port *port)
|
||||
{
|
||||
unsigned long temp;
|
||||
|
||||
temp = lpuart32_read(port->membase + UARTCTRL);
|
||||
temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE);
|
||||
lpuart32_write(temp, port->membase + UARTCTRL);
|
||||
}
|
||||
|
||||
static void lpuart_stop_rx(struct uart_port *port)
|
||||
{
|
||||
unsigned char temp;
|
||||
@ -177,6 +307,14 @@ static void lpuart_stop_rx(struct uart_port *port)
|
||||
writeb(temp & ~UARTCR2_RE, port->membase + UARTCR2);
|
||||
}
|
||||
|
||||
static void lpuart32_stop_rx(struct uart_port *port)
|
||||
{
|
||||
unsigned long temp;
|
||||
|
||||
temp = lpuart32_read(port->membase + UARTCTRL);
|
||||
lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL);
|
||||
}
|
||||
|
||||
static void lpuart_copy_rx_to_tty(struct lpuart_port *sport,
|
||||
struct tty_port *tty, int count)
|
||||
{
|
||||
@ -399,6 +537,30 @@ static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
|
||||
lpuart_stop_tx(&sport->port);
|
||||
}
|
||||
|
||||
static inline void lpuart32_transmit_buffer(struct lpuart_port *sport)
|
||||
{
|
||||
struct circ_buf *xmit = &sport->port.state->xmit;
|
||||
unsigned long txcnt;
|
||||
|
||||
txcnt = lpuart32_read(sport->port.membase + UARTWATER);
|
||||
txcnt = txcnt >> UARTWATER_TXCNT_OFF;
|
||||
txcnt &= UARTWATER_COUNT_MASK;
|
||||
while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) {
|
||||
lpuart32_write(xmit->buf[xmit->tail], sport->port.membase + UARTDATA);
|
||||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||||
sport->port.icount.tx++;
|
||||
txcnt = lpuart32_read(sport->port.membase + UARTWATER);
|
||||
txcnt = txcnt >> UARTWATER_TXCNT_OFF;
|
||||
txcnt &= UARTWATER_COUNT_MASK;
|
||||
}
|
||||
|
||||
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||||
uart_write_wakeup(&sport->port);
|
||||
|
||||
if (uart_circ_empty(xmit))
|
||||
lpuart32_stop_tx(&sport->port);
|
||||
}
|
||||
|
||||
static void lpuart_start_tx(struct uart_port *port)
|
||||
{
|
||||
struct lpuart_port *sport = container_of(port,
|
||||
@ -418,6 +580,18 @@ static void lpuart_start_tx(struct uart_port *port)
|
||||
}
|
||||
}
|
||||
|
||||
static void lpuart32_start_tx(struct uart_port *port)
|
||||
{
|
||||
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
|
||||
unsigned long temp;
|
||||
|
||||
temp = lpuart32_read(port->membase + UARTCTRL);
|
||||
lpuart32_write(temp | UARTCTRL_TIE, port->membase + UARTCTRL);
|
||||
|
||||
if (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE)
|
||||
lpuart32_transmit_buffer(sport);
|
||||
}
|
||||
|
||||
static irqreturn_t lpuart_txint(int irq, void *dev_id)
|
||||
{
|
||||
struct lpuart_port *sport = dev_id;
|
||||
@ -426,16 +600,25 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
|
||||
|
||||
spin_lock_irqsave(&sport->port.lock, flags);
|
||||
if (sport->port.x_char) {
|
||||
writeb(sport->port.x_char, sport->port.membase + UARTDR);
|
||||
if (sport->lpuart32)
|
||||
lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA);
|
||||
else
|
||||
writeb(sport->port.x_char, sport->port.membase + UARTDR);
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
|
||||
lpuart_stop_tx(&sport->port);
|
||||
if (sport->lpuart32)
|
||||
lpuart32_stop_tx(&sport->port);
|
||||
else
|
||||
lpuart_stop_tx(&sport->port);
|
||||
goto out;
|
||||
}
|
||||
|
||||
lpuart_transmit_buffer(sport);
|
||||
if (sport->lpuart32)
|
||||
lpuart32_transmit_buffer(sport);
|
||||
else
|
||||
lpuart_transmit_buffer(sport);
|
||||
|
||||
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||||
uart_write_wakeup(&sport->port);
|
||||
@ -508,6 +691,70 @@ out:
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t lpuart32_rxint(int irq, void *dev_id)
|
||||
{
|
||||
struct lpuart_port *sport = dev_id;
|
||||
unsigned int flg, ignored = 0;
|
||||
struct tty_port *port = &sport->port.state->port;
|
||||
unsigned long flags;
|
||||
unsigned long rx, sr;
|
||||
|
||||
spin_lock_irqsave(&sport->port.lock, flags);
|
||||
|
||||
while (!(lpuart32_read(sport->port.membase + UARTFIFO) & UARTFIFO_RXEMPT)) {
|
||||
flg = TTY_NORMAL;
|
||||
sport->port.icount.rx++;
|
||||
/*
|
||||
* to clear the FE, OR, NF, FE, PE flags,
|
||||
* read STAT then read DATA reg
|
||||
*/
|
||||
sr = lpuart32_read(sport->port.membase + UARTSTAT);
|
||||
rx = lpuart32_read(sport->port.membase + UARTDATA);
|
||||
rx &= 0x3ff;
|
||||
|
||||
if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
|
||||
continue;
|
||||
|
||||
if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) {
|
||||
if (sr & UARTSTAT_PE)
|
||||
sport->port.icount.parity++;
|
||||
else if (sr & UARTSTAT_FE)
|
||||
sport->port.icount.frame++;
|
||||
|
||||
if (sr & UARTSTAT_OR)
|
||||
sport->port.icount.overrun++;
|
||||
|
||||
if (sr & sport->port.ignore_status_mask) {
|
||||
if (++ignored > 100)
|
||||
goto out;
|
||||
continue;
|
||||
}
|
||||
|
||||
sr &= sport->port.read_status_mask;
|
||||
|
||||
if (sr & UARTSTAT_PE)
|
||||
flg = TTY_PARITY;
|
||||
else if (sr & UARTSTAT_FE)
|
||||
flg = TTY_FRAME;
|
||||
|
||||
if (sr & UARTSTAT_OR)
|
||||
flg = TTY_OVERRUN;
|
||||
|
||||
#ifdef SUPPORT_SYSRQ
|
||||
sport->port.sysrq = 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
tty_insert_flip_char(port, rx, flg);
|
||||
}
|
||||
|
||||
out:
|
||||
spin_unlock_irqrestore(&sport->port.lock, flags);
|
||||
|
||||
tty_flip_buffer_push(port);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t lpuart_int(int irq, void *dev_id)
|
||||
{
|
||||
struct lpuart_port *sport = dev_id;
|
||||
@ -532,6 +779,26 @@ static irqreturn_t lpuart_int(int irq, void *dev_id)
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t lpuart32_int(int irq, void *dev_id)
|
||||
{
|
||||
struct lpuart_port *sport = dev_id;
|
||||
unsigned long sts, rxcount;
|
||||
|
||||
sts = lpuart32_read(sport->port.membase + UARTSTAT);
|
||||
rxcount = lpuart32_read(sport->port.membase + UARTWATER);
|
||||
rxcount = rxcount >> UARTWATER_RXCNT_OFF;
|
||||
|
||||
if (sts & UARTSTAT_RDRF || rxcount > 0)
|
||||
lpuart32_rxint(irq, dev_id);
|
||||
|
||||
if ((sts & UARTSTAT_TDRE) &&
|
||||
!(lpuart32_read(sport->port.membase + UARTBAUD) & UARTBAUD_TDMAE))
|
||||
lpuart_txint(irq, dev_id);
|
||||
|
||||
lpuart32_write(sts, sport->port.membase + UARTSTAT);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/* return TIOCSER_TEMT when transmitter is not busy */
|
||||
static unsigned int lpuart_tx_empty(struct uart_port *port)
|
||||
{
|
||||
@ -539,6 +806,12 @@ static unsigned int lpuart_tx_empty(struct uart_port *port)
|
||||
TIOCSER_TEMT : 0;
|
||||
}
|
||||
|
||||
static unsigned int lpuart32_tx_empty(struct uart_port *port)
|
||||
{
|
||||
return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ?
|
||||
TIOCSER_TEMT : 0;
|
||||
}
|
||||
|
||||
static unsigned int lpuart_get_mctrl(struct uart_port *port)
|
||||
{
|
||||
unsigned int temp = 0;
|
||||
@ -554,6 +827,21 @@ static unsigned int lpuart_get_mctrl(struct uart_port *port)
|
||||
return temp;
|
||||
}
|
||||
|
||||
static unsigned int lpuart32_get_mctrl(struct uart_port *port)
|
||||
{
|
||||
unsigned int temp = 0;
|
||||
unsigned long reg;
|
||||
|
||||
reg = lpuart32_read(port->membase + UARTMODIR);
|
||||
if (reg & UARTMODIR_TXCTSE)
|
||||
temp |= TIOCM_CTS;
|
||||
|
||||
if (reg & UARTMODIR_RXRTSE)
|
||||
temp |= TIOCM_RTS;
|
||||
|
||||
return temp;
|
||||
}
|
||||
|
||||
static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
||||
{
|
||||
unsigned char temp;
|
||||
@ -570,6 +858,22 @@ static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
||||
writeb(temp, port->membase + UARTMODEM);
|
||||
}
|
||||
|
||||
static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
||||
{
|
||||
unsigned long temp;
|
||||
|
||||
temp = lpuart32_read(port->membase + UARTMODIR) &
|
||||
~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
|
||||
|
||||
if (mctrl & TIOCM_RTS)
|
||||
temp |= UARTMODIR_RXRTSE;
|
||||
|
||||
if (mctrl & TIOCM_CTS)
|
||||
temp |= UARTMODIR_TXCTSE;
|
||||
|
||||
lpuart32_write(temp, port->membase + UARTMODIR);
|
||||
}
|
||||
|
||||
static void lpuart_break_ctl(struct uart_port *port, int break_state)
|
||||
{
|
||||
unsigned char temp;
|
||||
@ -582,6 +886,18 @@ static void lpuart_break_ctl(struct uart_port *port, int break_state)
|
||||
writeb(temp, port->membase + UARTCR2);
|
||||
}
|
||||
|
||||
static void lpuart32_break_ctl(struct uart_port *port, int break_state)
|
||||
{
|
||||
unsigned long temp;
|
||||
|
||||
temp = lpuart32_read(port->membase + UARTCTRL) & ~UARTCTRL_SBK;
|
||||
|
||||
if (break_state != 0)
|
||||
temp |= UARTCTRL_SBK;
|
||||
|
||||
lpuart32_write(temp, port->membase + UARTCTRL);
|
||||
}
|
||||
|
||||
static void lpuart_setup_watermark(struct lpuart_port *sport)
|
||||
{
|
||||
unsigned char val, cr2;
|
||||
@ -608,6 +924,31 @@ static void lpuart_setup_watermark(struct lpuart_port *sport)
|
||||
writeb(cr2_saved, sport->port.membase + UARTCR2);
|
||||
}
|
||||
|
||||
static void lpuart32_setup_watermark(struct lpuart_port *sport)
|
||||
{
|
||||
unsigned long val, ctrl;
|
||||
unsigned long ctrl_saved;
|
||||
|
||||
ctrl = lpuart32_read(sport->port.membase + UARTCTRL);
|
||||
ctrl_saved = ctrl;
|
||||
ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE |
|
||||
UARTCTRL_RIE | UARTCTRL_RE);
|
||||
lpuart32_write(ctrl, sport->port.membase + UARTCTRL);
|
||||
|
||||
/* enable FIFO mode */
|
||||
val = lpuart32_read(sport->port.membase + UARTFIFO);
|
||||
val |= UARTFIFO_TXFE | UARTFIFO_RXFE;
|
||||
val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH;
|
||||
lpuart32_write(val, sport->port.membase + UARTFIFO);
|
||||
|
||||
/* set the watermark */
|
||||
val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF);
|
||||
lpuart32_write(val, sport->port.membase + UARTWATER);
|
||||
|
||||
/* Restore cr2 */
|
||||
lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL);
|
||||
}
|
||||
|
||||
static int lpuart_dma_tx_request(struct uart_port *port)
|
||||
{
|
||||
struct lpuart_port *sport = container_of(port,
|
||||
@ -786,6 +1127,40 @@ static int lpuart_startup(struct uart_port *port)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int lpuart32_startup(struct uart_port *port)
|
||||
{
|
||||
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
|
||||
int ret;
|
||||
unsigned long flags;
|
||||
unsigned long temp;
|
||||
|
||||
/* determine FIFO size */
|
||||
temp = lpuart32_read(sport->port.membase + UARTFIFO);
|
||||
|
||||
sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) &
|
||||
UARTFIFO_FIFOSIZE_MASK) - 1);
|
||||
|
||||
sport->rxfifo_size = 0x1 << (((temp >> UARTFIFO_RXSIZE_OFF) &
|
||||
UARTFIFO_FIFOSIZE_MASK) - 1);
|
||||
|
||||
ret = devm_request_irq(port->dev, port->irq, lpuart32_int, 0,
|
||||
DRIVER_NAME, sport);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
spin_lock_irqsave(&sport->port.lock, flags);
|
||||
|
||||
lpuart32_setup_watermark(sport);
|
||||
|
||||
temp = lpuart32_read(sport->port.membase + UARTCTRL);
|
||||
temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE);
|
||||
temp |= UARTCTRL_ILIE;
|
||||
lpuart32_write(temp, sport->port.membase + UARTCTRL);
|
||||
|
||||
spin_unlock_irqrestore(&sport->port.lock, flags);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void lpuart_shutdown(struct uart_port *port)
|
||||
{
|
||||
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
|
||||
@ -810,6 +1185,25 @@ static void lpuart_shutdown(struct uart_port *port)
|
||||
}
|
||||
}
|
||||
|
||||
static void lpuart32_shutdown(struct uart_port *port)
|
||||
{
|
||||
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
|
||||
unsigned long temp;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
|
||||
/* disable Rx/Tx and interrupts */
|
||||
temp = lpuart32_read(port->membase + UARTCTRL);
|
||||
temp &= ~(UARTCTRL_TE | UARTCTRL_RE |
|
||||
UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
|
||||
lpuart32_write(temp, port->membase + UARTCTRL);
|
||||
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
|
||||
devm_free_irq(port->dev, port->irq, sport);
|
||||
}
|
||||
|
||||
static void
|
||||
lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
|
||||
struct ktermios *old)
|
||||
@ -947,6 +1341,125 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
|
||||
spin_unlock_irqrestore(&sport->port.lock, flags);
|
||||
}
|
||||
|
||||
static void
|
||||
lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
|
||||
struct ktermios *old)
|
||||
{
|
||||
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
|
||||
unsigned long flags;
|
||||
unsigned long ctrl, old_ctrl, bd, modem;
|
||||
unsigned int baud;
|
||||
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
|
||||
unsigned int sbr;
|
||||
|
||||
ctrl = old_ctrl = lpuart32_read(sport->port.membase + UARTCTRL);
|
||||
bd = lpuart32_read(sport->port.membase + UARTBAUD);
|
||||
modem = lpuart32_read(sport->port.membase + UARTMODIR);
|
||||
/*
|
||||
* only support CS8 and CS7, and for CS7 must enable PE.
|
||||
* supported mode:
|
||||
* - (7,e/o,1)
|
||||
* - (8,n,1)
|
||||
* - (8,m/s,1)
|
||||
* - (8,e/o,1)
|
||||
*/
|
||||
while ((termios->c_cflag & CSIZE) != CS8 &&
|
||||
(termios->c_cflag & CSIZE) != CS7) {
|
||||
termios->c_cflag &= ~CSIZE;
|
||||
termios->c_cflag |= old_csize;
|
||||
old_csize = CS8;
|
||||
}
|
||||
|
||||
if ((termios->c_cflag & CSIZE) == CS8 ||
|
||||
(termios->c_cflag & CSIZE) == CS7)
|
||||
ctrl = old_ctrl & ~UARTCTRL_M;
|
||||
|
||||
if (termios->c_cflag & CMSPAR) {
|
||||
if ((termios->c_cflag & CSIZE) != CS8) {
|
||||
termios->c_cflag &= ~CSIZE;
|
||||
termios->c_cflag |= CS8;
|
||||
}
|
||||
ctrl |= UARTCTRL_M;
|
||||
}
|
||||
|
||||
if (termios->c_cflag & CRTSCTS) {
|
||||
modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
|
||||
} else {
|
||||
termios->c_cflag &= ~CRTSCTS;
|
||||
modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
|
||||
}
|
||||
|
||||
if (termios->c_cflag & CSTOPB)
|
||||
termios->c_cflag &= ~CSTOPB;
|
||||
|
||||
/* parity must be enabled when CS7 to match 8-bits format */
|
||||
if ((termios->c_cflag & CSIZE) == CS7)
|
||||
termios->c_cflag |= PARENB;
|
||||
|
||||
if ((termios->c_cflag & PARENB)) {
|
||||
if (termios->c_cflag & CMSPAR) {
|
||||
ctrl &= ~UARTCTRL_PE;
|
||||
ctrl |= UARTCTRL_M;
|
||||
} else {
|
||||
ctrl |= UARTCR1_PE;
|
||||
if ((termios->c_cflag & CSIZE) == CS8)
|
||||
ctrl |= UARTCTRL_M;
|
||||
if (termios->c_cflag & PARODD)
|
||||
ctrl |= UARTCTRL_PT;
|
||||
else
|
||||
ctrl &= ~UARTCTRL_PT;
|
||||
}
|
||||
}
|
||||
|
||||
/* ask the core to calculate the divisor */
|
||||
baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
|
||||
|
||||
spin_lock_irqsave(&sport->port.lock, flags);
|
||||
|
||||
sport->port.read_status_mask = 0;
|
||||
if (termios->c_iflag & INPCK)
|
||||
sport->port.read_status_mask |= (UARTSTAT_FE | UARTSTAT_PE);
|
||||
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
|
||||
sport->port.read_status_mask |= UARTSTAT_FE;
|
||||
|
||||
/* characters to ignore */
|
||||
sport->port.ignore_status_mask = 0;
|
||||
if (termios->c_iflag & IGNPAR)
|
||||
sport->port.ignore_status_mask |= UARTSTAT_PE;
|
||||
if (termios->c_iflag & IGNBRK) {
|
||||
sport->port.ignore_status_mask |= UARTSTAT_FE;
|
||||
/*
|
||||
* if we're ignoring parity and break indicators,
|
||||
* ignore overruns too (for real raw support).
|
||||
*/
|
||||
if (termios->c_iflag & IGNPAR)
|
||||
sport->port.ignore_status_mask |= UARTSTAT_OR;
|
||||
}
|
||||
|
||||
/* update the per-port timeout */
|
||||
uart_update_timeout(port, termios->c_cflag, baud);
|
||||
|
||||
/* wait transmit engin complete */
|
||||
while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC))
|
||||
barrier();
|
||||
|
||||
/* disable transmit and receive */
|
||||
lpuart32_write(old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
|
||||
sport->port.membase + UARTCTRL);
|
||||
|
||||
sbr = sport->port.uartclk / (16 * baud);
|
||||
bd &= ~UARTBAUD_SBR_MASK;
|
||||
bd |= sbr & UARTBAUD_SBR_MASK;
|
||||
bd |= UARTBAUD_BOTHEDGE;
|
||||
bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
|
||||
lpuart32_write(bd, sport->port.membase + UARTBAUD);
|
||||
lpuart32_write(modem, sport->port.membase + UARTMODIR);
|
||||
lpuart32_write(ctrl, sport->port.membase + UARTCTRL);
|
||||
/* restore control register */
|
||||
|
||||
spin_unlock_irqrestore(&sport->port.lock, flags);
|
||||
}
|
||||
|
||||
static const char *lpuart_type(struct uart_port *port)
|
||||
{
|
||||
return "FSL_LPUART";
|
||||
@ -1006,6 +1519,24 @@ static struct uart_ops lpuart_pops = {
|
||||
.verify_port = lpuart_verify_port,
|
||||
};
|
||||
|
||||
static struct uart_ops lpuart32_pops = {
|
||||
.tx_empty = lpuart32_tx_empty,
|
||||
.set_mctrl = lpuart32_set_mctrl,
|
||||
.get_mctrl = lpuart32_get_mctrl,
|
||||
.stop_tx = lpuart32_stop_tx,
|
||||
.start_tx = lpuart32_start_tx,
|
||||
.stop_rx = lpuart32_stop_rx,
|
||||
.break_ctl = lpuart32_break_ctl,
|
||||
.startup = lpuart32_startup,
|
||||
.shutdown = lpuart32_shutdown,
|
||||
.set_termios = lpuart32_set_termios,
|
||||
.type = lpuart_type,
|
||||
.request_port = lpuart_request_port,
|
||||
.release_port = lpuart_release_port,
|
||||
.config_port = lpuart_config_port,
|
||||
.verify_port = lpuart_verify_port,
|
||||
};
|
||||
|
||||
static struct lpuart_port *lpuart_ports[UART_NR];
|
||||
|
||||
#ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE
|
||||
@ -1017,6 +1548,14 @@ static void lpuart_console_putchar(struct uart_port *port, int ch)
|
||||
writeb(ch, port->membase + UARTDR);
|
||||
}
|
||||
|
||||
static void lpuart32_console_putchar(struct uart_port *port, int ch)
|
||||
{
|
||||
while (!(lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE))
|
||||
barrier();
|
||||
|
||||
lpuart32_write(ch, port->membase + UARTDATA);
|
||||
}
|
||||
|
||||
static void
|
||||
lpuart_console_write(struct console *co, const char *s, unsigned int count)
|
||||
{
|
||||
@ -1038,6 +1577,27 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count)
|
||||
writeb(old_cr2, sport->port.membase + UARTCR2);
|
||||
}
|
||||
|
||||
static void
|
||||
lpuart32_console_write(struct console *co, const char *s, unsigned int count)
|
||||
{
|
||||
struct lpuart_port *sport = lpuart_ports[co->index];
|
||||
unsigned long old_cr, cr;
|
||||
|
||||
/* first save CR2 and then disable interrupts */
|
||||
cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL);
|
||||
cr |= (UARTCTRL_TE | UARTCTRL_RE);
|
||||
cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
|
||||
lpuart32_write(cr, sport->port.membase + UARTCTRL);
|
||||
|
||||
uart_console_write(&sport->port, s, count, lpuart32_console_putchar);
|
||||
|
||||
/* wait for transmitter finish complete and restore CR2 */
|
||||
while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC))
|
||||
barrier();
|
||||
|
||||
lpuart32_write(old_cr, sport->port.membase + UARTCTRL);
|
||||
}
|
||||
|
||||
/*
|
||||
* if the port was already initialised (eg, by a boot loader),
|
||||
* try to determine the current setup.
|
||||
@ -1091,6 +1651,49 @@ lpuart_console_get_options(struct lpuart_port *sport, int *baud,
|
||||
"from %d to %d\n", baud_raw, *baud);
|
||||
}
|
||||
|
||||
static void __init
|
||||
lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
|
||||
int *parity, int *bits)
|
||||
{
|
||||
unsigned long cr, bd;
|
||||
unsigned int sbr, uartclk, baud_raw;
|
||||
|
||||
cr = lpuart32_read(sport->port.membase + UARTCTRL);
|
||||
cr &= UARTCTRL_TE | UARTCTRL_RE;
|
||||
if (!cr)
|
||||
return;
|
||||
|
||||
/* ok, the port was enabled */
|
||||
|
||||
cr = lpuart32_read(sport->port.membase + UARTCTRL);
|
||||
|
||||
*parity = 'n';
|
||||
if (cr & UARTCTRL_PE) {
|
||||
if (cr & UARTCTRL_PT)
|
||||
*parity = 'o';
|
||||
else
|
||||
*parity = 'e';
|
||||
}
|
||||
|
||||
if (cr & UARTCTRL_M)
|
||||
*bits = 9;
|
||||
else
|
||||
*bits = 8;
|
||||
|
||||
bd = lpuart32_read(sport->port.membase + UARTBAUD);
|
||||
bd &= UARTBAUD_SBR_MASK;
|
||||
sbr = bd;
|
||||
uartclk = clk_get_rate(sport->clk);
|
||||
/*
|
||||
* baud = mod_clk/(16*(sbr[13]+(brfa)/32)
|
||||
*/
|
||||
baud_raw = uartclk / (16 * sbr);
|
||||
|
||||
if (*baud != baud_raw)
|
||||
printk(KERN_INFO "Serial: Console lpuart rounded baud rate"
|
||||
"from %d to %d\n", baud_raw, *baud);
|
||||
}
|
||||
|
||||
static int __init lpuart_console_setup(struct console *co, char *options)
|
||||
{
|
||||
struct lpuart_port *sport;
|
||||
@ -1114,9 +1717,15 @@ static int __init lpuart_console_setup(struct console *co, char *options)
|
||||
if (options)
|
||||
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
||||
else
|
||||
lpuart_console_get_options(sport, &baud, &parity, &bits);
|
||||
if (sport->lpuart32)
|
||||
lpuart32_console_get_options(sport, &baud, &parity, &bits);
|
||||
else
|
||||
lpuart_console_get_options(sport, &baud, &parity, &bits);
|
||||
|
||||
lpuart_setup_watermark(sport);
|
||||
if (sport->lpuart32)
|
||||
lpuart32_setup_watermark(sport);
|
||||
else
|
||||
lpuart_setup_watermark(sport);
|
||||
|
||||
return uart_set_options(&sport->port, co, baud, parity, bits, flow);
|
||||
}
|
||||
@ -1132,9 +1741,21 @@ static struct console lpuart_console = {
|
||||
.data = &lpuart_reg,
|
||||
};
|
||||
|
||||
static struct console lpuart32_console = {
|
||||
.name = DEV_NAME,
|
||||
.write = lpuart32_console_write,
|
||||
.device = uart_console_device,
|
||||
.setup = lpuart_console_setup,
|
||||
.flags = CON_PRINTBUFFER,
|
||||
.index = -1,
|
||||
.data = &lpuart_reg,
|
||||
};
|
||||
|
||||
#define LPUART_CONSOLE (&lpuart_console)
|
||||
#define LPUART32_CONSOLE (&lpuart32_console)
|
||||
#else
|
||||
#define LPUART_CONSOLE NULL
|
||||
#define LPUART32_CONSOLE NULL
|
||||
#endif
|
||||
|
||||
static struct uart_driver lpuart_reg = {
|
||||
@ -1164,7 +1785,7 @@ static int lpuart_probe(struct platform_device *pdev)
|
||||
return ret;
|
||||
}
|
||||
sport->port.line = ret;
|
||||
|
||||
sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart");
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res)
|
||||
return -ENODEV;
|
||||
@ -1178,7 +1799,10 @@ static int lpuart_probe(struct platform_device *pdev)
|
||||
sport->port.type = PORT_LPUART;
|
||||
sport->port.iotype = UPIO_MEM;
|
||||
sport->port.irq = platform_get_irq(pdev, 0);
|
||||
sport->port.ops = &lpuart_pops;
|
||||
if (sport->lpuart32)
|
||||
sport->port.ops = &lpuart32_pops;
|
||||
else
|
||||
sport->port.ops = &lpuart_pops;
|
||||
sport->port.flags = UPF_BOOT_AUTOCONF;
|
||||
|
||||
sport->clk = devm_clk_get(&pdev->dev, "ipg");
|
||||
@ -1200,6 +1824,11 @@ static int lpuart_probe(struct platform_device *pdev)
|
||||
|
||||
platform_set_drvdata(pdev, &sport->port);
|
||||
|
||||
if (sport->lpuart32)
|
||||
lpuart_reg.cons = LPUART32_CONSOLE;
|
||||
else
|
||||
lpuart_reg.cons = LPUART_CONSOLE;
|
||||
|
||||
ret = uart_add_one_port(&lpuart_reg, &sport->port);
|
||||
if (ret) {
|
||||
clk_disable_unprepare(sport->clk);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user