Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-18 01:51:53 +00:00
Code Issues Packages Projects Releases Wiki Activity

doc: devicetree: Fix various typos

Browse Source 
Fix spelling typos in Documentation/devicetree/bindings.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Masanari Iida 2013-04-10 22:33:46 +09:00 committed by Jiri Kosina
parent 4cf0cec21e
commit 372c1d6d64
8 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
View File

@ -26,7 +26,7 @@ Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
- pinctrl-names: Should contain only one value - "default".
Optional properties:
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
- samsung,i2c-slave-addr: Slave address in multi-master environment. If not
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
specified, the default value in Hz is 100000.

2
Documentation/devicetree/bindings/leds/tca6507.txt
View File

@ -1,4 +1,4 @@
LEDs conected to tca6507
LEDs connected to tca6507
Required properties:
- compatible : should be : "ti,tca6507".

2
Documentation/devicetree/bindings/metag/meta-intc.txt
View File

@ -12,7 +12,7 @@ Required properties:
handle 32 interrupt sources).
- interrupt-controller: The presence of this property identifies the node
as an interupt controller. No property value shall be defined.
as an interrupt controller. No property value shall be defined.
- #interrupt-cells: Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 2.

2
Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
View File

@ -1,6 +1,6 @@
* Atmel AT91 Pinmux Controller
The AT91 Pinmux Controler, enables the IC
The AT91 Pinmux Controller, enables the IC
to share one PAD to several functional blocks. The sharing is done by
multiplexing the PAD input/output signals. For each PAD there are up to
8 muxing options (called periph modes). Since different modules require

2
Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
View File

@ -5,7 +5,7 @@ controller, and pinmux/control device.
Required properties:
- compatible: "brcm,bcm2835-gpio"
- reg: Should contain the physical address of the GPIO module's registes.
- reg: Should contain the physical address of the GPIO module's registers.
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters:

2
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
View File

@ -2,7 +2,7 @@
QNAP NAS devices have a microcontroller controlling the main power
supply. This microcontroller is connected to UART1 of the Kirkwood and
Orion5x SoCs. Sending the charactor 'A', at 19200 baud, tells the
Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
microcontroller to turn the power off. This driver adds a handler to
pm_power_off which is called to turn the power off.

2
Documentation/devicetree/bindings/regulator/max8997-regulator.txt
View File

@ -28,7 +28,7 @@ Required properties:
safe operating voltage).
If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
property is specified, then all the eigth voltage values for the
property is specified, then all the eight voltage values for the
'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
Optional properties:

2
Documentation/devicetree/bindings/usb/samsung-usbphy.txt
View File

@ -4,7 +4,7 @@ The Samsung's phy transceiver is used for controlling usb phy for
s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers
across Samsung SOCs.
TODO: Adding the PHY binding with controller(s) according to the under
developement generic PHY driver.
development generic PHY driver.
Required properties: