usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts

The code that enables either BC_LVL or COMP_CHNG interrupt in tcpm_set_cc
wrongly assumes that the interrupt is unmasked by writing 1 to the apropriate
bit in the mask register. In fact, interrupts are enabled when the mask
is 0, so the tcpm_set_cc enables interrupt for COMP_CHNG when it expects
BC_LVL interrupt to be enabled.

This causes inability of the driver to recognize cable unplug events
in host mode (unplug is recognized only via a COMP_CHNG interrupt).

In device mode this bug was masked by simultaneous triggering of the VBUS
change interrupt, because of loss of VBUS when the port peer is providing
power.

Fixes: 48242e3053 ("usb: typec: fusb302: Revert "Resolve fixed power role contract setup"")
Cc: stable <stable@vger.kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/20211108102833.2793803-1-megous@megous.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ondrej Jirman 2021-11-08 11:28:32 +01:00 committed by Greg Kroah-Hartman
parent 47ce45906c
commit 362468830d

View File

@ -666,18 +666,6 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
ret);
goto done;
}
ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
FUSB_REG_MASK_BC_LVL |
FUSB_REG_MASK_COMP_CHNG,
FUSB_REG_MASK_COMP_CHNG);
if (ret < 0) {
fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
ret);
goto done;
}
chip->intr_comp_chng = true;
break;
case TYPEC_CC_RD:
ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
FUSB_REG_MASK_BC_LVL |
FUSB_REG_MASK_COMP_CHNG,
@ -687,7 +675,21 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
ret);
goto done;
}
chip->intr_comp_chng = true;
chip->intr_bc_lvl = false;
break;
case TYPEC_CC_RD:
ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
FUSB_REG_MASK_BC_LVL |
FUSB_REG_MASK_COMP_CHNG,
FUSB_REG_MASK_COMP_CHNG);
if (ret < 0) {
fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
ret);
goto done;
}
chip->intr_bc_lvl = true;
chip->intr_comp_chng = false;
break;
default:
break;