mirror of
https://github.com/torvalds/linux.git
synced 2024-11-12 07:01:57 +00:00
mmc: dw_mmc-k3: add sd support for hi3660
Add sd card support for hi3660 soc Signed-off-by: Li Wei <liwei213@huawei.com> Signed-off-by: Chen Jun <chenjun14@huawei.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
liwei
Ulf Hansson
parent
941e372d89
commit
361c7fe9b0
@ -8,6 +8,8 @@
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/mfd/syscon.h>
|
||||
#include <linux/mmc/host.h>
|
||||
@ -28,7 +30,35 @@
|
||||
#define AO_SCTRL_SEL18 BIT(10)
|
||||
#define AO_SCTRL_CTRL3 0x40C
|
||||
|
||||
#define DWMMC_SDIO_ID 2
|
||||
|
||||
#define SOC_SCTRL_SCPERCTRL5 (0x314)
|
||||
#define SDCARD_IO_SEL18 BIT(2)
|
||||
|
||||
#define SDCARD_RD_THRESHOLD (512)
|
||||
|
||||
#define GENCLK_DIV (7)
|
||||
|
||||
#define GPIO_CLK_ENABLE BIT(16)
|
||||
#define GPIO_CLK_DIV_MASK GENMASK(11, 8)
|
||||
#define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13)
|
||||
#define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16)
|
||||
#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21)
|
||||
#define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26)
|
||||
|
||||
#define TIMING_MODE 3
|
||||
#define TIMING_CFG_NUM 10
|
||||
|
||||
#define NUM_PHASES (40)
|
||||
|
||||
#define ENABLE_SHIFT_MIN_SMPL (4)
|
||||
#define ENABLE_SHIFT_MAX_SMPL (12)
|
||||
#define USE_DLY_MIN_SMPL (11)
|
||||
#define USE_DLY_MAX_SMPL (14)
|
||||
|
||||
struct k3_priv {
|
||||
int ctrl_id;
|
||||
u32 cur_speed;
|
||||
struct regmap *reg;
|
||||
};
|
||||
|
||||
@ -38,6 +68,41 @@ static unsigned long dw_mci_hi6220_caps[] = {
|
||||
0
|
||||
};
|
||||
|
||||
struct hs_timing {
|
||||
u32 drv_phase;
|
||||
u32 smpl_dly;
|
||||
u32 smpl_phase_max;
|
||||
u32 smpl_phase_min;
|
||||
};
|
||||
|
||||
struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
|
||||
{ /* reserved */ },
|
||||
{ /* SD */
|
||||
{7, 0, 15, 15,}, /* 0: LEGACY 400k */
|
||||
{6, 0, 4, 4,}, /* 1: MMC_HS */
|
||||
{6, 0, 3, 3,}, /* 2: SD_HS */
|
||||
{6, 0, 15, 15,}, /* 3: SDR12 */
|
||||
{6, 0, 2, 2,}, /* 4: SDR25 */
|
||||
{4, 0, 11, 0,}, /* 5: SDR50 */
|
||||
{6, 4, 15, 0,}, /* 6: SDR104 */
|
||||
{0}, /* 7: DDR50 */
|
||||
{0}, /* 8: DDR52 */
|
||||
{0}, /* 9: HS200 */
|
||||
},
|
||||
{ /* SDIO */
|
||||
{7, 0, 15, 15,}, /* 0: LEGACY 400k */
|
||||
{0}, /* 1: MMC_HS */
|
||||
{6, 0, 15, 15,}, /* 2: SD_HS */
|
||||
{6, 0, 15, 15,}, /* 3: SDR12 */
|
||||
{6, 0, 0, 0,}, /* 4: SDR25 */
|
||||
{4, 0, 12, 0,}, /* 5: SDR50 */
|
||||
{5, 4, 15, 0,}, /* 6: SDR104 */
|
||||
{0}, /* 7: DDR50 */
|
||||
{0}, /* 8: DDR52 */
|
||||
{0}, /* 9: HS200 */
|
||||
}
|
||||
};
|
||||
|
||||
static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
||||
{
|
||||
int ret;
|
||||
@ -66,6 +131,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
|
||||
if (IS_ERR(priv->reg))
|
||||
priv->reg = NULL;
|
||||
|
||||
priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
|
||||
if (priv->ctrl_id < 0)
|
||||
priv->ctrl_id = 0;
|
||||
|
||||
host->priv = priv;
|
||||
return 0;
|
||||
}
|
||||
@ -144,7 +213,236 @@ static const struct dw_mci_drv_data hi6220_data = {
|
||||
.execute_tuning = dw_mci_hi6220_execute_tuning,
|
||||
};
|
||||
|
||||
static void dw_mci_hs_set_timing(struct dw_mci *host, int timing,
|
||||
int smpl_phase)
|
||||
{
|
||||
u32 drv_phase;
|
||||
u32 smpl_dly;
|
||||
u32 use_smpl_dly = 0;
|
||||
u32 enable_shift = 0;
|
||||
u32 reg_value;
|
||||
int ctrl_id;
|
||||
struct k3_priv *priv;
|
||||
|
||||
priv = host->priv;
|
||||
ctrl_id = priv->ctrl_id;
|
||||
|
||||
drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
|
||||
smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly;
|
||||
if (smpl_phase == -1)
|
||||
smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max +
|
||||
hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2;
|
||||
|
||||
switch (timing) {
|
||||
case MMC_TIMING_UHS_SDR104:
|
||||
if (smpl_phase >= USE_DLY_MIN_SMPL &&
|
||||
smpl_phase <= USE_DLY_MAX_SMPL)
|
||||
use_smpl_dly = 1;
|
||||
/* fallthrough */
|
||||
case MMC_TIMING_UHS_SDR50:
|
||||
if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
|
||||
smpl_phase <= ENABLE_SHIFT_MAX_SMPL)
|
||||
enable_shift = 1;
|
||||
break;
|
||||
}
|
||||
|
||||
mci_writel(host, GPIO, 0x0);
|
||||
usleep_range(5, 10);
|
||||
|
||||
reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) |
|
||||
FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) |
|
||||
FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase);
|
||||
mci_writel(host, UHS_REG_EXT, reg_value);
|
||||
|
||||
mci_writel(host, ENABLE_SHIFT, enable_shift);
|
||||
|
||||
reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |
|
||||
FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly);
|
||||
mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
|
||||
|
||||
/* We should delay 1ms wait for timing setting finished. */
|
||||
usleep_range(1000, 2000);
|
||||
}
|
||||
|
||||
static int dw_mci_hi3660_init(struct dw_mci *host)
|
||||
{
|
||||
mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD,
|
||||
SDMMC_CARD_RD_THR_EN));
|
||||
|
||||
dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
|
||||
host->bus_hz /= (GENCLK_DIV + 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dw_mci_set_sel18(struct dw_mci *host, bool set)
|
||||
{
|
||||
int ret;
|
||||
unsigned int val;
|
||||
struct k3_priv *priv;
|
||||
|
||||
priv = host->priv;
|
||||
|
||||
val = set ? SDCARD_IO_SEL18 : 0;
|
||||
ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
|
||||
SDCARD_IO_SEL18, val);
|
||||
if (ret) {
|
||||
dev_err(host->dev, "sel18 %u error\n", val);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
||||
{
|
||||
int ret;
|
||||
unsigned long wanted;
|
||||
unsigned long actual;
|
||||
struct k3_priv *priv = host->priv;
|
||||
|
||||
if (!ios->clock || ios->clock == priv->cur_speed)
|
||||
return;
|
||||
|
||||
wanted = ios->clock * (GENCLK_DIV + 1);
|
||||
ret = clk_set_rate(host->ciu_clk, wanted);
|
||||
if (ret) {
|
||||
dev_err(host->dev, "failed to set rate %luHz\n", wanted);
|
||||
return;
|
||||
}
|
||||
actual = clk_get_rate(host->ciu_clk);
|
||||
|
||||
dw_mci_hs_set_timing(host, ios->timing, -1);
|
||||
host->bus_hz = actual / (GENCLK_DIV + 1);
|
||||
host->current_speed = 0;
|
||||
priv->cur_speed = host->bus_hz;
|
||||
}
|
||||
|
||||
static int dw_mci_get_best_clksmpl(unsigned int sample_flag)
|
||||
{
|
||||
int i;
|
||||
int interval;
|
||||
unsigned int v;
|
||||
unsigned int len;
|
||||
unsigned int range_start = 0;
|
||||
unsigned int range_length = 0;
|
||||
unsigned int middle_range = 0;
|
||||
|
||||
if (!sample_flag)
|
||||
return -EIO;
|
||||
|
||||
if (~sample_flag == 0)
|
||||
return 0;
|
||||
|
||||
i = ffs(sample_flag) - 1;
|
||||
|
||||
/*
|
||||
* A clock cycle is divided into 32 phases,
|
||||
* each of which is represented by a bit,
|
||||
* finding the optimal phase.
|
||||
*/
|
||||
while (i < 32) {
|
||||
v = ror32(sample_flag, i);
|
||||
len = ffs(~v) - 1;
|
||||
|
||||
if (len > range_length) {
|
||||
range_length = len;
|
||||
range_start = i;
|
||||
}
|
||||
|
||||
interval = ffs(v >> len) - 1;
|
||||
if (interval < 0)
|
||||
break;
|
||||
|
||||
i += len + interval;
|
||||
}
|
||||
|
||||
middle_range = range_start + range_length / 2;
|
||||
if (middle_range >= 32)
|
||||
middle_range %= 32;
|
||||
|
||||
return middle_range;
|
||||
}
|
||||
|
||||
static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
|
||||
{
|
||||
int i = 0;
|
||||
struct dw_mci *host = slot->host;
|
||||
struct mmc_host *mmc = slot->mmc;
|
||||
int smpl_phase = 0;
|
||||
u32 tuning_sample_flag = 0;
|
||||
int best_clksmpl = 0;
|
||||
|
||||
for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) {
|
||||
smpl_phase %= 32;
|
||||
|
||||
mci_writel(host, TMOUT, ~0);
|
||||
dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase);
|
||||
|
||||
if (!mmc_send_tuning(mmc, opcode, NULL))
|
||||
tuning_sample_flag |= (1 << smpl_phase);
|
||||
else
|
||||
tuning_sample_flag &= ~(1 << smpl_phase);
|
||||
}
|
||||
|
||||
best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
|
||||
if (best_clksmpl < 0) {
|
||||
dev_err(host->dev, "All phases bad!\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
|
||||
|
||||
dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
|
||||
best_clksmpl, tuning_sample_flag);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
|
||||
struct mmc_ios *ios)
|
||||
{
|
||||
int ret = 0;
|
||||
struct dw_mci_slot *slot = mmc_priv(mmc);
|
||||
struct k3_priv *priv;
|
||||
struct dw_mci *host;
|
||||
|
||||
host = slot->host;
|
||||
priv = host->priv;
|
||||
|
||||
if (!priv || !priv->reg)
|
||||
return 0;
|
||||
|
||||
if (priv->ctrl_id == DWMMC_SDIO_ID)
|
||||
return 0;
|
||||
|
||||
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
|
||||
ret = dw_mci_set_sel18(host, 0);
|
||||
else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
|
||||
ret = dw_mci_set_sel18(host, 1);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (!IS_ERR(mmc->supply.vqmmc)) {
|
||||
ret = mmc_regulator_set_vqmmc(mmc, ios);
|
||||
if (ret) {
|
||||
dev_err(host->dev, "Regulator set error %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct dw_mci_drv_data hi3660_data = {
|
||||
.init = dw_mci_hi3660_init,
|
||||
.set_ios = dw_mci_hi3660_set_ios,
|
||||
.parse_dt = dw_mci_hi6220_parse_dt,
|
||||
.execute_tuning = dw_mci_hi3660_execute_tuning,
|
||||
.switch_voltage = dw_mci_hi3660_switch_voltage,
|
||||
};
|
||||
|
||||
static const struct of_device_id dw_mci_k3_match[] = {
|
||||
{ .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
|
||||
{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
|
||||
{ .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
|
||||
{},
|
||||
|
||||
@ -314,6 +314,8 @@ struct dw_mci_board {
|
||||
#define SDMMC_DSCADDR 0x094
|
||||
#define SDMMC_BUFADDR 0x098
|
||||
#define SDMMC_CDTHRCTL 0x100
|
||||
#define SDMMC_UHS_REG_EXT 0x108
|
||||
#define SDMMC_ENABLE_SHIFT 0x110
|
||||
#define SDMMC_DATA(x) (x)
|
||||
/*
|
||||
* Registers to support idmac 64-bit address mode
|
||||
|
||||
Loading…
Reference in New Issue
Block a user