smsc75xx: don't enable remote wakeup directly

As pointed out by Bjorn Mork, the generic "usb" driver sets this
for us so no need to directly set it in this driver.

Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Bjorn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Steve Glendinning 2012-11-28 05:59:50 +00:00 committed by David S. Miller
parent b4cdea9cc3
commit 351f33d9e0

View File

@ -61,7 +61,6 @@
#define SUSPEND_SUSPEND1 (0x02)
#define SUSPEND_SUSPEND2 (0x04)
#define SUSPEND_SUSPEND3 (0x08)
#define SUSPEND_REMOTEWAKE (0x10)
#define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
@ -172,26 +171,6 @@ static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
return __smsc75xx_write_reg(dev, index, data, 0);
}
static int smsc75xx_set_feature(struct usbnet *dev, u32 feature)
{
if (WARN_ON_ONCE(!dev))
return -EINVAL;
return usbnet_write_cmd_nopm(dev, USB_REQ_SET_FEATURE,
USB_DIR_OUT | USB_RECIP_DEVICE,
feature, 0, NULL, 0);
}
static int smsc75xx_clear_feature(struct usbnet *dev, u32 feature)
{
if (WARN_ON_ONCE(!dev))
return -EINVAL;
return usbnet_write_cmd_nopm(dev, USB_REQ_CLEAR_FEATURE,
USB_DIR_OUT | USB_RECIP_DEVICE,
feature, 0, NULL, 0);
}
/* Loop until the read is completed with timeout
* called with phy_mutex held */
static __must_check int __smsc75xx_phy_wait_not_busy(struct usbnet *dev,
@ -674,8 +653,13 @@ static int smsc75xx_ethtool_set_wol(struct net_device *net,
{
struct usbnet *dev = netdev_priv(net);
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
int ret;
pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
check_warn_return(ret, "device_set_wakeup_enable error %d\n", ret);
return 0;
}
@ -1263,9 +1247,7 @@ static int smsc75xx_enter_suspend0(struct usbnet *dev)
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
check_warn_return(ret, "Error writing PMT_CTL\n");
smsc75xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
pdata->suspend_flags |= SUSPEND_SUSPEND0 | SUSPEND_REMOTEWAKE;
pdata->suspend_flags |= SUSPEND_SUSPEND0;
return 0;
}
@ -1292,9 +1274,7 @@ static int smsc75xx_enter_suspend1(struct usbnet *dev)
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
check_warn_return(ret, "Error writing PMT_CTL\n");
smsc75xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
pdata->suspend_flags |= SUSPEND_SUSPEND1 | SUSPEND_REMOTEWAKE;
pdata->suspend_flags |= SUSPEND_SUSPEND1;
return 0;
}
@ -1349,9 +1329,7 @@ static int smsc75xx_enter_suspend3(struct usbnet *dev)
ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
check_warn_return(ret, "Error writing PMT_CTL\n");
smsc75xx_set_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
pdata->suspend_flags |= SUSPEND_SUSPEND3 | SUSPEND_REMOTEWAKE;
pdata->suspend_flags |= SUSPEND_SUSPEND3;
return 0;
}
@ -1651,11 +1629,6 @@ static int smsc75xx_resume(struct usb_interface *intf)
/* do this first to ensure it's cleared even in error case */
pdata->suspend_flags = 0;
if (suspend_flags & SUSPEND_REMOTEWAKE) {
ret = smsc75xx_clear_feature(dev, USB_DEVICE_REMOTE_WAKEUP);
check_warn_return(ret, "Error disabling remote wakeup\n");
}
if (suspend_flags & SUSPEND_ALLMODES) {
/* Disable wakeup sources */
ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);