net: phy: marvell: Use core genphy_soft_reset()

Rather than using an open coded equivalent, use the core
genphy_soft_reset() function.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Andrew Lunn 2017-07-30 22:41:45 +02:00 committed by David S. Miller
parent 8cf8b87b73
commit 3438634456

View File

@ -292,17 +292,11 @@ static int marvell_config_aneg(struct phy_device *phydev)
return err;
if (phydev->autoneg != AUTONEG_ENABLE) {
int bmcr;
/* A write to speed/duplex bits (that is performed by
* genphy_config_aneg() call above) must be followed by
* a software reset. Otherwise, the write has no effect.
*/
bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0)
return bmcr;
err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
err = genphy_soft_reset(phydev);
if (err < 0)
return err;
}
@ -318,8 +312,7 @@ static int m88e1101_config_aneg(struct phy_device *phydev)
* that certain registers get written in order
* to restart autonegotiation
*/
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@ -354,7 +347,7 @@ static int m88e1111_config_aneg(struct phy_device *phydev)
* that certain registers get written in order
* to restart autonegotiation
*/
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
err = genphy_soft_reset(phydev);
err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
if (err < 0)
@ -370,17 +363,11 @@ static int m88e1111_config_aneg(struct phy_device *phydev)
return err;
if (phydev->autoneg != AUTONEG_ENABLE) {
int bmcr;
/* A write to speed/duplex bits (that is performed by
* genphy_config_aneg() call above) must be followed by
* a software reset. Otherwise, the write has no effect.
*/
bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0)
return bmcr;
err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
err = genphy_soft_reset(phydev);
if (err < 0)
return err;
}
@ -493,7 +480,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
marvell_set_page(phydev, oldpage);
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@ -656,9 +643,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
int temp;
int err;
temp = phy_read(phydev, MII_BMCR);
temp |= BMCR_RESET;
err = phy_write(phydev, MII_BMCR, temp);
err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@ -689,14 +674,10 @@ static int m88e1116r_config_init(struct phy_device *phydev)
if (err < 0)
return err;
temp = phy_read(phydev, MII_BMCR);
temp |= BMCR_RESET;
err = phy_write(phydev, MII_BMCR, temp);
err = genphy_soft_reset(phydev);
if (err < 0)
return err;
mdelay(500);
return marvell_config_init(phydev);
}
@ -804,14 +785,10 @@ static int m88e1111_config_init_rtbi(struct phy_device *phydev)
return err;
/* soft reset */
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
err = genphy_soft_reset(phydev);
if (err < 0)
return err;
do
temp = phy_read(phydev, MII_BMCR);
while (temp & BMCR_RESET);
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
@ -850,7 +827,7 @@ static int m88e1111_config_init(struct phy_device *phydev)
if (err < 0)
return err;
return phy_write(phydev, MII_BMCR, BMCR_RESET);
return genphy_soft_reset(phydev);
}
static int m88e1121_config_init(struct phy_device *phydev)
@ -912,7 +889,7 @@ static int m88e1118_config_aneg(struct phy_device *phydev)
{
int err;
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
err = genphy_soft_reset(phydev);
if (err < 0)
return err;
@ -961,7 +938,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
if (err < 0)
return err;
return phy_write(phydev, MII_BMCR, BMCR_RESET);
return genphy_soft_reset(phydev);
}
static int m88e1149_config_init(struct phy_device *phydev)
@ -987,7 +964,7 @@ static int m88e1149_config_init(struct phy_device *phydev)
if (err < 0)
return err;
return phy_write(phydev, MII_BMCR, BMCR_RESET);
return genphy_soft_reset(phydev);
}
static int m88e1145_config_init_rgmii(struct phy_device *phydev)