mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 22:21:40 +00:00
Input: cap11xx - add advanced sensitivity settings
Add support for advanced sensitivity settings that allows more precise tunig of touch buttons. Input-treshold allows to set the sensitivity for each channel separately. Also add signal guard feature for CAP129x chips. Signed-off-by: Jiri Valek - 2N <jiriv@axis.com> Link: https://lore.kernel.org/r/20231121155250.613242-3-jiriv@axis.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Jiri Valek - 2N
Dmitry Torokhov
parent
e4af6bb1f6
commit
2e3ae00021
@ -14,6 +14,7 @@
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/bitfield.h>
|
||||
|
||||
#define CAP11XX_REG_MAIN_CONTROL 0x00
|
||||
#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6)
|
||||
@ -24,6 +25,7 @@
|
||||
#define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a
|
||||
#define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X))
|
||||
#define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f
|
||||
#define CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK 0x70
|
||||
#define CAP11XX_REG_CONFIG 0x20
|
||||
#define CAP11XX_REG_SENSOR_ENABLE 0x21
|
||||
#define CAP11XX_REG_SENSOR_CONFIG 0x22
|
||||
@ -32,6 +34,7 @@
|
||||
#define CAP11XX_REG_CALIBRATION 0x26
|
||||
#define CAP11XX_REG_INT_ENABLE 0x27
|
||||
#define CAP11XX_REG_REPEAT_RATE 0x28
|
||||
#define CAP11XX_REG_SIGNAL_GUARD_ENABLE 0x29
|
||||
#define CAP11XX_REG_MT_CONFIG 0x2a
|
||||
#define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b
|
||||
#define CAP11XX_REG_MT_PATTERN 0x2d
|
||||
@ -47,6 +50,8 @@
|
||||
#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X))
|
||||
#define CAP11XX_REG_LED_POLARITY 0x73
|
||||
#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74
|
||||
#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG 0x80
|
||||
#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2 0x81
|
||||
|
||||
#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90
|
||||
#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91
|
||||
@ -78,12 +83,20 @@ struct cap11xx_led {
|
||||
|
||||
struct cap11xx_priv {
|
||||
struct regmap *regmap;
|
||||
struct device *dev;
|
||||
struct input_dev *idev;
|
||||
const struct cap11xx_hw_model *model;
|
||||
u8 id;
|
||||
|
||||
struct cap11xx_led *leds;
|
||||
int num_leds;
|
||||
|
||||
/* config */
|
||||
u8 analog_gain;
|
||||
u8 sensitivity_delta_sense;
|
||||
u8 signal_guard_inputs_mask;
|
||||
u32 thresholds[8];
|
||||
u32 calib_sensitivities[8];
|
||||
u32 keycodes[];
|
||||
};
|
||||
|
||||
@ -181,6 +194,175 @@ static const struct regmap_config cap11xx_regmap_config = {
|
||||
.volatile_reg = cap11xx_volatile_reg,
|
||||
};
|
||||
|
||||
static int cap11xx_write_calib_sens_config_1(struct cap11xx_priv *priv)
|
||||
{
|
||||
return regmap_write(priv->regmap,
|
||||
CAP11XX_REG_CALIB_SENSITIVITY_CONFIG,
|
||||
(priv->calib_sensitivities[3] << 6) |
|
||||
(priv->calib_sensitivities[2] << 4) |
|
||||
(priv->calib_sensitivities[1] << 2) |
|
||||
priv->calib_sensitivities[0]);
|
||||
}
|
||||
|
||||
static int cap11xx_write_calib_sens_config_2(struct cap11xx_priv *priv)
|
||||
{
|
||||
return regmap_write(priv->regmap,
|
||||
CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2,
|
||||
(priv->calib_sensitivities[7] << 6) |
|
||||
(priv->calib_sensitivities[6] << 4) |
|
||||
(priv->calib_sensitivities[5] << 2) |
|
||||
priv->calib_sensitivities[4]);
|
||||
}
|
||||
|
||||
static int cap11xx_init_keys(struct cap11xx_priv *priv)
|
||||
{
|
||||
struct device_node *node = priv->dev->of_node;
|
||||
struct device *dev = priv->dev;
|
||||
int i, error;
|
||||
u32 u32_val;
|
||||
|
||||
if (!node) {
|
||||
dev_err(dev, "Corresponding DT entry is not available\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (!of_property_read_u32(node, "microchip,sensor-gain", &u32_val)) {
|
||||
if (priv->model->no_gain) {
|
||||
dev_warn(dev,
|
||||
"This model doesn't support 'sensor-gain'\n");
|
||||
} else if (is_power_of_2(u32_val) && u32_val <= 8) {
|
||||
priv->analog_gain = (u8)ilog2(u32_val);
|
||||
|
||||
error = regmap_update_bits(priv->regmap,
|
||||
CAP11XX_REG_MAIN_CONTROL,
|
||||
CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
|
||||
priv->analog_gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
|
||||
if (error)
|
||||
return error;
|
||||
} else {
|
||||
dev_err(dev, "Invalid sensor-gain value %u\n", u32_val);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
if (of_property_read_bool(node, "microchip,irq-active-high")) {
|
||||
if (priv->id == CAP1106 ||
|
||||
priv->id == CAP1126 ||
|
||||
priv->id == CAP1188) {
|
||||
error = regmap_update_bits(priv->regmap,
|
||||
CAP11XX_REG_CONFIG2,
|
||||
CAP11XX_REG_CONFIG2_ALT_POL,
|
||||
0);
|
||||
if (error)
|
||||
return error;
|
||||
} else {
|
||||
dev_warn(dev,
|
||||
"This model doesn't support 'irq-active-high'\n");
|
||||
}
|
||||
}
|
||||
|
||||
if (!of_property_read_u32(node, "microchip,sensitivity-delta-sense", &u32_val)) {
|
||||
if (!is_power_of_2(u32_val) || u32_val > 128) {
|
||||
dev_err(dev, "Invalid sensitivity-delta-sense value %u\n", u32_val);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
priv->sensitivity_delta_sense = (u8)ilog2(u32_val);
|
||||
u32_val = ~(FIELD_PREP(CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK,
|
||||
priv->sensitivity_delta_sense));
|
||||
|
||||
error = regmap_update_bits(priv->regmap,
|
||||
CAP11XX_REG_SENSITIVITY_CONTROL,
|
||||
CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK,
|
||||
u32_val);
|
||||
if (error)
|
||||
return error;
|
||||
}
|
||||
|
||||
if (!of_property_read_u32_array(node, "microchip,input-threshold",
|
||||
priv->thresholds, priv->model->num_channels)) {
|
||||
for (i = 0; i < priv->model->num_channels; i++) {
|
||||
if (priv->thresholds[i] > 127) {
|
||||
dev_err(dev, "Invalid input-threshold value %u\n",
|
||||
priv->thresholds[i]);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
error = regmap_write(priv->regmap,
|
||||
CAP11XX_REG_SENSOR_THRESH(i),
|
||||
priv->thresholds[i]);
|
||||
if (error)
|
||||
return error;
|
||||
}
|
||||
}
|
||||
|
||||
if (!of_property_read_u32_array(node, "microchip,calib-sensitivity",
|
||||
priv->calib_sensitivities,
|
||||
priv->model->num_channels)) {
|
||||
if (priv->id == CAP1293 || priv->id == CAP1298) {
|
||||
for (i = 0; i < priv->model->num_channels; i++) {
|
||||
if (!is_power_of_2(priv->calib_sensitivities[i]) ||
|
||||
priv->calib_sensitivities[i] > 4) {
|
||||
dev_err(dev, "Invalid calib-sensitivity value %u\n",
|
||||
priv->calib_sensitivities[i]);
|
||||
return -EINVAL;
|
||||
}
|
||||
priv->calib_sensitivities[i] = ilog2(priv->calib_sensitivities[i]);
|
||||
}
|
||||
|
||||
error = cap11xx_write_calib_sens_config_1(priv);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
if (priv->id == CAP1298) {
|
||||
error = cap11xx_write_calib_sens_config_2(priv);
|
||||
if (error)
|
||||
return error;
|
||||
}
|
||||
} else {
|
||||
dev_warn(dev,
|
||||
"This model doesn't support 'calib-sensitivity'\n");
|
||||
}
|
||||
}
|
||||
|
||||
for (i = 0; i < priv->model->num_channels; i++) {
|
||||
if (!of_property_read_u32_index(node, "microchip,signal-guard",
|
||||
i, &u32_val)) {
|
||||
if (u32_val > 1)
|
||||
return -EINVAL;
|
||||
if (u32_val)
|
||||
priv->signal_guard_inputs_mask |= 0x01 << i;
|
||||
}
|
||||
}
|
||||
|
||||
if (priv->signal_guard_inputs_mask) {
|
||||
if (priv->id == CAP1293 || priv->id == CAP1298) {
|
||||
error = regmap_write(priv->regmap,
|
||||
CAP11XX_REG_SIGNAL_GUARD_ENABLE,
|
||||
priv->signal_guard_inputs_mask);
|
||||
if (error)
|
||||
return error;
|
||||
} else {
|
||||
dev_warn(dev,
|
||||
"This model doesn't support 'signal-guard'\n");
|
||||
}
|
||||
}
|
||||
|
||||
/* Provide some useful defaults */
|
||||
for (i = 0; i < priv->model->num_channels; i++)
|
||||
priv->keycodes[i] = KEY_A + i;
|
||||
|
||||
of_property_read_u32_array(node, "linux,keycodes",
|
||||
priv->keycodes, priv->model->num_channels);
|
||||
|
||||
/* Disable autorepeat. The Linux input system has its own handling. */
|
||||
error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
|
||||
{
|
||||
struct cap11xx_priv *priv = data;
|
||||
@ -332,11 +514,9 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
|
||||
const struct i2c_device_id *id = i2c_client_get_device_id(i2c_client);
|
||||
struct device *dev = &i2c_client->dev;
|
||||
struct cap11xx_priv *priv;
|
||||
struct device_node *node;
|
||||
const struct cap11xx_hw_model *cap;
|
||||
int i, error, gain = 0;
|
||||
int i, error;
|
||||
unsigned int val, rev;
|
||||
u32 gain32;
|
||||
|
||||
if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
|
||||
dev_err(dev, "Invalid device ID %lu\n", id->driver_data);
|
||||
@ -355,6 +535,8 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
priv->dev = dev;
|
||||
|
||||
priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config);
|
||||
if (IS_ERR(priv->regmap))
|
||||
return PTR_ERR(priv->regmap);
|
||||
@ -384,50 +566,15 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
|
||||
return error;
|
||||
|
||||
dev_info(dev, "CAP11XX detected, model %s, revision 0x%02x\n",
|
||||
id->name, rev);
|
||||
|
||||
priv->model = cap;
|
||||
priv->id = id->driver_data;
|
||||
|
||||
dev_info(dev, "CAP11XX device detected, model %s, revision 0x%02x\n",
|
||||
id->name, rev);
|
||||
node = dev->of_node;
|
||||
|
||||
if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
|
||||
if (cap->no_gain)
|
||||
dev_warn(dev,
|
||||
"This version doesn't support sensor gain\n");
|
||||
else if (is_power_of_2(gain32) && gain32 <= 8)
|
||||
gain = ilog2(gain32);
|
||||
else
|
||||
dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
|
||||
}
|
||||
|
||||
if (id->driver_data == CAP1106 ||
|
||||
id->driver_data == CAP1126 ||
|
||||
id->driver_data == CAP1188) {
|
||||
if (of_property_read_bool(node, "microchip,irq-active-high")) {
|
||||
error = regmap_update_bits(priv->regmap,
|
||||
CAP11XX_REG_CONFIG2,
|
||||
CAP11XX_REG_CONFIG2_ALT_POL,
|
||||
0);
|
||||
if (error)
|
||||
return error;
|
||||
}
|
||||
}
|
||||
|
||||
/* Provide some useful defaults */
|
||||
for (i = 0; i < cap->num_channels; i++)
|
||||
priv->keycodes[i] = KEY_A + i;
|
||||
|
||||
of_property_read_u32_array(node, "linux,keycodes",
|
||||
priv->keycodes, cap->num_channels);
|
||||
|
||||
if (!cap->no_gain) {
|
||||
error = regmap_update_bits(priv->regmap,
|
||||
CAP11XX_REG_MAIN_CONTROL,
|
||||
CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
|
||||
gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
|
||||
if (error)
|
||||
return error;
|
||||
}
|
||||
|
||||
/* Disable autorepeat. The Linux input system has its own handling. */
|
||||
error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
|
||||
error = cap11xx_init_keys(priv);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
@ -439,7 +586,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
|
||||
priv->idev->id.bustype = BUS_I2C;
|
||||
priv->idev->evbit[0] = BIT_MASK(EV_KEY);
|
||||
|
||||
if (of_property_read_bool(node, "autorepeat"))
|
||||
if (of_property_read_bool(dev->of_node, "autorepeat"))
|
||||
__set_bit(EV_REP, priv->idev->evbit);
|
||||
|
||||
for (i = 0; i < cap->num_channels; i++)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user