Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-27 21:33:00 +00:00
Code Issues Packages Projects Releases Wiki Activity

Third set of IIO new device support, features and cleanup for the 4.10 cycle.

Browse Source 
Includes Peter Rosin's interesting drivers for a comparator. First complex
 use we have had with an analog front end made from discrete components.
 
 Brian Masney's work on moving the tsl2583 driver out of staging also
 feature extensively!
 
 New Drivers
 * DAC based on a digital potentiometer
   - New driver for the use of a dpot as a DAC. Includes bindings and Axentia
   entry in vendor prefixes.
 * Envelope detector baed on DAC and a comparator including device tree
   bindings.
 
 Staging Graduation
 * tsl2583.
 
 Core new features
 - Core provision for _available attributes.   This one had been stalled for
   a long time until Peter picked it up and ran with it!
 - In kernel interface helpers to retrieve available info from channels.
 
 Driver new features
 * mcp4531
   - Add range of available raw values (used for the dpot dac driver).
 
 Driver cleanups and fixes for issues introduced
 * ad7766
   - Testing the wrong variable following devm_regulator_bulk_get introduced
   with the driver earlier in this cycle.
 * ad9832
   - Fix a wrong ordering in the probe introduced in the previous set of
     patches.  A use before allocation bug.
 * cros_ec_sensors
   - Testing for an error in a u8 will never work.
 * mpu3050
   - Remove duplicate initializer for the module owner.
   - Add missing i2c dependency.
   - Inform the i2c mux core how it is used - step one in implifying device
   tree bindings.
 * st-sensors
   - Get rid of large number of uninformative defines in favour of putting the
   constants where they are relevant. It is clear what they are from where
   they are used.
 * tsl2583
   - Fix unused function warning when CONFIG_PM disabled and remove the
   ifdefs in favour of __maybe_unused.
   - Refactor taos_chip_on  to only read relevant registers.
   - Make sure calibscale and integration time are being set.
   - Verify chip is in ready to be used before calibration.
   - Remove some repeated checks for chip status (it's protected by a mutex
   so can't change until it's released)
   - Change current state storage from a tristate enum to a boolean seeing as
   only two values are actually used now.
   - Drop a redundant write to the control regiser in taos_probe (it's a noop)
   - Drop the FSF mailing address.
   - Clean up logging to not use hard coded function names (use __func__
   instead).
   - Cleanup up variable and function name prefixes.
   - Alignment of #define fixes.
   - Fix comparison between signed and unsigned integer warnings.
   - Add some newlines in favour of readability.
   - Combine the two sysfs ABI docs that somehow ended up in different places.
   - Fix multiline comment syntax.
   - Move a code block to inside an else statement as it makes more sense there.
   - Change tsl2583_als_calibrate to return 0 rather than a value nothing
   reads.
   - Drop some pointless brackets
   - Don't assume 32bit unsigned int.
   - Change to a per device instance lux table.
   - Add missing tsl2583 to the list of supported devices in the intro comments.
   - Improve commment on clearing of interrupts.
   - Drop some uninformative comments.
   - Drop a memset call that doesn't do anything useful any more.
   - Don't initialize some return variables that are always set.
   - Add Brian Masney as a module author after all these changes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJYKMYhERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaIiNMP
 /00ZTTfPR/I5VtriTchGTgXN6lDTnypFk9Z4niynK3EIdF6Mw5XphQjtUzg7sJl4
 U7yH89lzt0PxAJHylW5x0YOwrr6fyau+rNA2Kj26psaQpf5Yva0UDRexsomTZaad
 P005cf0yc4fuG/7KvjeONeLeaRXf9Qfs20r8htECLFhIGSE0qsGtfzUMn6tdbyn/
 r/hxHR7oE2YThuFytX2sNJEJVmCDz+tTOz7kJv5L0e6Cg6cvMFizYUsoFYcZYGOQ
 DNicdRfW5FOidBMCqXzYLDBn+oY+a35g90hFV3CvYsfEm+X6BzTgr3FI3PHmtXHT
 RRAmRdgxg2z/rqp475f5EamRtZxEg0uktbqcs9bH8Bx7IDe8KtoNKLdPdxIT3T1D
 ZYb0RkpPmfnBq3bDGh7DJVWl+Ht9Fj0jaKRNyWgiyopA9c6zN4MKRA+HNSxKRvD7
 Qizw0QIPbtEGkw6WbQrrOSSwzNY/dq51vrT0eBmMaGpjmdDpRKrK53/k7uwk3/Wv
 hjGWD5kdLRCAHL+EQKFssN/RgLS5PRhXsJQFeIYbH8VJFlEZ28j09gXJnjcpDucK
 CXv37q8CX6wJ2NB+i+skOvKpxArgv+Mr4oE9LNYZie65EUyN28/Ii1n9vYmTPTlG
 KXGKPynaR0sfrl+ir6+FCtuFXJnYC5WUqJH/yMRjA2z8
 =mPkb
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.10c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third set of IIO new device support, features and cleanup for the 4.10 cycle.

Includes Peter Rosin's interesting drivers for a comparator. First complex
use we have had with an analog front end made from discrete components.

Brian Masney's work on moving the tsl2583 driver out of staging also
feature extensively!

New Drivers
* DAC based on a digital potentiometer
  - New driver for the use of a dpot as a DAC. Includes bindings and Axentia
  entry in vendor prefixes.
* Envelope detector baed on DAC and a comparator including device tree
  bindings.

Staging Graduation
* tsl2583.

Core new features
- Core provision for _available attributes.   This one had been stalled for
  a long time until Peter picked it up and ran with it!
- In kernel interface helpers to retrieve available info from channels.

Driver new features
* mcp4531
  - Add range of available raw values (used for the dpot dac driver).

Driver cleanups and fixes for issues introduced
* ad7766
  - Testing the wrong variable following devm_regulator_bulk_get introduced
  with the driver earlier in this cycle.
* ad9832
  - Fix a wrong ordering in the probe introduced in the previous set of
    patches.  A use before allocation bug.
* cros_ec_sensors
  - Testing for an error in a u8 will never work.
* mpu3050
  - Remove duplicate initializer for the module owner.
  - Add missing i2c dependency.
  - Inform the i2c mux core how it is used - step one in implifying device
  tree bindings.
* st-sensors
  - Get rid of large number of uninformative defines in favour of putting the
  constants where they are relevant. It is clear what they are from where
  they are used.
* tsl2583
  - Fix unused function warning when CONFIG_PM disabled and remove the
  ifdefs in favour of __maybe_unused.
  - Refactor taos_chip_on  to only read relevant registers.
  - Make sure calibscale and integration time are being set.
  - Verify chip is in ready to be used before calibration.
  - Remove some repeated checks for chip status (it's protected by a mutex
  so can't change until it's released)
  - Change current state storage from a tristate enum to a boolean seeing as
  only two values are actually used now.
  - Drop a redundant write to the control regiser in taos_probe (it's a noop)
  - Drop the FSF mailing address.
  - Clean up logging to not use hard coded function names (use __func__
  instead).
  - Cleanup up variable and function name prefixes.
  - Alignment of #define fixes.
  - Fix comparison between signed and unsigned integer warnings.
  - Add some newlines in favour of readability.
  - Combine the two sysfs ABI docs that somehow ended up in different places.
  - Fix multiline comment syntax.
  - Move a code block to inside an else statement as it makes more sense there.
  - Change tsl2583_als_calibrate to return 0 rather than a value nothing
  reads.
  - Drop some pointless brackets
  - Don't assume 32bit unsigned int.
  - Change to a per device instance lux table.
  - Add missing tsl2583 to the list of supported devices in the intro comments.
  - Improve commment on clearing of interrupts.
  - Drop some uninformative comments.
  - Drop a memset call that doesn't do anything useful any more.
  - Don't initialize some return variables that are always set.
  - Add Brian Masney as a module author after all these changes.
This commit is contained in:
Greg Kroah-Hartman 2016-11-16 17:20:40 +01:00
commit 2c52b1efd6
35 changed files with 1984 additions and 970 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector Normal file
View File

@ -0,0 +1,36 @@
What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_invert
Date: October 2016
KernelVersion: 4.9
Contact: Peter Rosin <peda@axentia.se>
Description:
The DAC is used to find the peak level of an alternating
voltage input signal by a binary search using the output
of a comparator wired to an interrupt pin. Like so:
_
| \
input +------>-------|+ \
| \
.-------. | }---.
| | | / |
| dac|-->--|- / |
| | |_/ |
| | |
| | |
| irq|------<-------'
| |
'-------'
The boolean invert attribute (0/1) should be set when the
input signal is centered around the maximum value of the
dac instead of zero. The envelope detector will search
from below in this case and will also invert the result.
The edge/level of the interrupt is also switched to its
opposite value.
What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_compare_interval
Date: October 2016
KernelVersion: 4.9
Contact: Peter Rosin <peda@axentia.se>
Description:
Number of milliseconds to wait for the comparator in each
step of the binary search for the input peak level. Needs
to relate to the frequency of the input signal.

8
Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac Normal file
View File

@ -0,0 +1,8 @@
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw_available
Date: October 2016
KernelVersion: 4.9
Contact: Peter Rosin <peda@axentia.se>
Description:
The range of available values represented as the minimum value,
the step and the maximum value, all enclosed in square brackets.
Example: [0 1 256]

18
drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 → Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
View File

@ -1,18 +1,18 @@
What: /sys/bus/iio/devices/device[n]/lux_table
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
This property gets/sets the table of coefficients
used in calculating illuminance in lux.
What: /sys/bus/iio/devices/device[n]/illuminance0_calibrate
What: /sys/bus/iio/devices/device[n]/in_illuminance_calibrate
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
This property causes an internal calibration of the als gain trim
value which is later used in calculating illuminance in lux.
What: /sys/bus/iio/devices/device[n]/illuminance0_input_target
What: /sys/bus/iio/devices/device[n]/in_illuminance_lux_table
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
This property gets/sets the table of coefficients
used in calculating illuminance in lux.
What: /sys/bus/iio/devices/device[n]/in_illuminance_input_target
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:

8
Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531 Normal file
View File

@ -0,0 +1,8 @@
What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw_available
Date: October 2016
KernelVersion: 4.9
Contact: Peter Rosin <peda@axentia.se>
Description:
The range of available values represented as the minimum value,
the step and the maximum value, all enclosed in square brackets.
Example: [0 1 256]

54
Documentation/devicetree/bindings/iio/adc/envelope-detector.txt Normal file
View File

@ -0,0 +1,54 @@
Bindings for ADC envelope detector using a DAC and a comparator
The DAC is used to find the peak level of an alternating voltage input
signal by a binary search using the output of a comparator wired to
an interrupt pin. Like so:
_
| \
input +------>-------|+ \
| \
.-------. | }---.
| | | / |
| dac|-->--|- / |
| | |_/ |
| | |
| | |
| irq|------<-------'
| |
'-------'
Required properties:
- compatible: Should be "axentia,tse850-envelope-detector"
- io-channels: Channel node of the dac to be used for comparator input.
- io-channel-names: Should be "dac".
- interrupt specification for one client interrupt,
see ../../interrupt-controller/interrupts.txt for details.
- interrupt-names: Should be "comp".
Example:
&i2c {
dpot: mcp4651-104@28 {
compatible = "microchip,mcp4651-104";
reg = <0x28>;
#io-channel-cells = <1>;
};
};
dac: dac {
compatible = "dpot-dac";
vref-supply = <&reg_3v3>;
io-channels = <&dpot 0>;
io-channel-names = "dpot";
#io-channel-cells = <1>;
};
envelope-detector {
compatible = "axentia,tse850-envelope-detector";
io-channels = <&dac 0>;
io-channel-names = "dac";
interrupt-parent = <&gpio>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "comp";
};

41
Documentation/devicetree/bindings/iio/dac/dpot-dac.txt Normal file
View File

@ -0,0 +1,41 @@
Bindings for DAC emulation using a digital potentiometer
It is assumed that the dpot is used as a voltage divider between the
current dpot wiper setting and the maximum resistance of the dpot. The
divided voltage is provided by a vref regulator.
.------.
.-----------. | |
| vref |--' .---.
| regulator |--. | |
'-----------' | | d |
| | p |
| | o | wiper
| | t |<---------+
| | |
| '---' dac output voltage
| |
'------+------------+
Required properties:
- compatible: Should be "dpot-dac"
- vref-supply: The regulator supplying the voltage divider.
- io-channels: Channel node of the dpot to be used for the voltage division.
- io-channel-names: Should be "dpot".
Example:
&i2c {
dpot: mcp4651-503@28 {
compatible = "microchip,mcp4651-503";
reg = <0x28>;
#io-channel-cells = <1>;
};
};
dac {
compatible = "dpot-dac";
vref-supply = <&reg_3v3>;
io-channels = <&dpot 0>;
io-channel-names = "dpot";
};

1
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -39,6 +39,7 @@ auo AU Optronics Corporation
auvidea Auvidea GmbH
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axentia Axentia Technologies AB
axis Axis Communications AB
boe BOE Technology Group Co., Ltd.
bosch Bosch Sensortec GmbH

17
MAINTAINERS
View File

@ -6124,6 +6124,22 @@ L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/rc/iguanair.c
IIO DIGITAL POTENTIOMETER DAC
M: Peter Rosin <peda@axentia.se>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac
F: Documentation/devicetree/bindings/iio/dac/dpot-dac.txt
F: drivers/iio/dac/dpot-dac.c
IIO ENVELOPE DETECTOR
M: Peter Rosin <peda@axentia.se>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
F: Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
F: drivers/iio/adc/envelope-detector.c
IIO SUBSYSTEM AND DRIVERS
M: Jonathan Cameron <jic23@kernel.org>
R: Hartmut Knaack <knaack.h@gmx.de>
@ -7714,6 +7730,7 @@ MCP4531 MICROCHIP DIGITAL POTENTIOMETER DRIVER
M: Peter Rosin <peda@axentia.se>
L: linux-iio@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531
F: drivers/iio/potentiometer/mcp4531.c
MEASUREMENT COMPUTING CIO-DAC IIO DRIVER

10
drivers/iio/adc/Kconfig
View File

@ -207,6 +207,16 @@ config DA9150_GPADC
To compile this driver as a module, choose M here: the module will be
called berlin2-adc.
config ENVELOPE_DETECTOR
tristate "Envelope detector using a DAC and a comparator"
depends on OF
help
Say yes here to build support for an envelope detector using a DAC
and a comparator.
To compile this driver as a module, choose M here: the module will be
called envelope-detector.
config EXYNOS_ADC
tristate "Exynos ADC driver support"
depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)

1
drivers/iio/adc/Makefile
View File

@ -21,6 +21,7 @@ obj-$(CONFIG_BCM_IPROC_ADC) += bcm_iproc_adc.o
obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
obj-$(CONFIG_ENVELOPE_DETECTOR) += envelope-detector.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o
obj-$(CONFIG_HI8435) += hi8435.o

4
drivers/iio/adc/ad7766.c
View File

@ -239,8 +239,8 @@ static int ad7766_probe(struct spi_device *spi)
ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg),
ad7766->reg);
if (IS_ERR(ad7766->reg))
return PTR_ERR(ad7766->reg);
if (ret)
return ret;
ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
GPIOD_OUT_HIGH);

422
drivers/iio/adc/envelope-detector.c Normal file
View File

@ -0,0 +1,422 @@
/*
* Driver for an envelope detector using a DAC and a comparator
*
* Copyright (C) 2016 Axentia Technologies AB
*
* Author: Peter Rosin <peda@axentia.se>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* The DAC is used to find the peak level of an alternating voltage input
* signal by a binary search using the output of a comparator wired to
* an interrupt pin. Like so:
* _
* | \
* input +------>-------|+ \
* | \
* .-------. | }---.
* | | | / |
* | dac|-->--|- / |
* | | |_/ |
* | | |
* | | |
* | irq|------<-------'
* | |
* '-------'
*/
#include <linux/completion.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/iio/consumer.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
struct envelope {
spinlock_t comp_lock; /* protects comp */
int comp;
struct mutex read_lock; /* protects everything else */
int comp_irq;
u32 comp_irq_trigger;
u32 comp_irq_trigger_inv;
struct iio_channel *dac;
struct delayed_work comp_timeout;
unsigned int comp_interval;
bool invert;
u32 dac_max;
int high;
int level;
int low;
struct completion done;
};
/*
* The envelope_detector_comp_latch function works together with the compare
* interrupt service routine below (envelope_detector_comp_isr) as a latch
* (one-bit memory) for if the interrupt has triggered since last calling
* this function.
* The ..._comp_isr function disables the interrupt so that the cpu does not
* need to service a possible interrupt flood from the comparator when no-one
* cares anyway, and this ..._comp_latch function reenables them again if
* needed.
*/
static int envelope_detector_comp_latch(struct envelope *env)
{
int comp;
spin_lock_irq(&env->comp_lock);
comp = env->comp;
env->comp = 0;
spin_unlock_irq(&env->comp_lock);
if (!comp)
return 0;
/*
* The irq was disabled, and is reenabled just now.
* But there might have been a pending irq that
* happened while the irq was disabled that fires
* just as the irq is reenabled. That is not what
* is desired.
*/
enable_irq(env->comp_irq);
/* So, synchronize this possibly pending irq... */
synchronize_irq(env->comp_irq);
/* ...and redo the whole dance. */
spin_lock_irq(&env->comp_lock);
comp = env->comp;
env->comp = 0;
spin_unlock_irq(&env->comp_lock);
if (comp)
enable_irq(env->comp_irq);
return 1;
}
static irqreturn_t envelope_detector_comp_isr(int irq, void *ctx)
{
struct envelope *env = ctx;
spin_lock(&env->comp_lock);
env->comp = 1;
disable_irq_nosync(env->comp_irq);
spin_unlock(&env->comp_lock);
return IRQ_HANDLED;
}
static void envelope_detector_setup_compare(struct envelope *env)
{
int ret;
/*
* Do a binary search for the peak input level, and stop
* when that level is "trapped" between two adjacent DAC
* values.
* When invert is active, use the midpoint floor so that
* env->level ends up as env->low when the termination
* criteria below is fulfilled, and use the midpoint
* ceiling when invert is not active so that env->level
* ends up as env->high in that case.
*/
env->level = (env->high + env->low + !env->invert) / 2;
if (env->high == env->low + 1) {
complete(&env->done);
return;
}
/* Set a "safe" DAC level (if there is such a thing)... */
ret = iio_write_channel_raw(env->dac, env->invert ? 0 : env->dac_max);
if (ret < 0)
goto err;
/* ...clear the comparison result... */
envelope_detector_comp_latch(env);
/* ...set the real DAC level... */
ret = iio_write_channel_raw(env->dac, env->level);
if (ret < 0)
goto err;
/* ...and wait for a bit to see if the latch catches anything. */
schedule_delayed_work(&env->comp_timeout,
msecs_to_jiffies(env->comp_interval));
return;
err:
env->level = ret;
complete(&env->done);
}
static void envelope_detector_timeout(struct work_struct *work)
{
struct envelope *env = container_of(work, struct envelope,
comp_timeout.work);
/* Adjust low/high depending on the latch content... */
if (!envelope_detector_comp_latch(env) ^ !env->invert)
env->low = env->level;
else
env->high = env->level;
/* ...and continue the search. */
envelope_detector_setup_compare(env);
}
static int envelope_detector_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct envelope *env = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
/*
* When invert is active, start with high=max+1 and low=0
* since we will end up with the low value when the
* termination criteria is fulfilled (rounding down). And
* start with high=max and low=-1 when invert is not active
* since we will end up with the high value in that case.
* This ensures that the returned value in both cases are
* in the same range as the DAC and is a value that has not
* triggered the comparator.
*/
mutex_lock(&env->read_lock);
env->high = env->dac_max + env->invert;
env->low = -1 + env->invert;
envelope_detector_setup_compare(env);
wait_for_completion(&env->done);
if (env->level < 0) {
ret = env->level;
goto err_unlock;
}
*val = env->invert ? env->dac_max - env->level : env->level;
mutex_unlock(&env->read_lock);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
return iio_read_channel_scale(env->dac, val, val2);
}
return -EINVAL;
err_unlock:
mutex_unlock(&env->read_lock);
return ret;
}
static ssize_t envelope_show_invert(struct iio_dev *indio_dev,
uintptr_t private,
struct iio_chan_spec const *ch, char *buf)
{
struct envelope *env = iio_priv(indio_dev);
return sprintf(buf, "%u\n", env->invert);
}
static ssize_t envelope_store_invert(struct iio_dev *indio_dev,
uintptr_t private,
struct iio_chan_spec const *ch,
const char *buf, size_t len)
{
struct envelope *env = iio_priv(indio_dev);
unsigned long invert;
int ret;
u32 trigger;
ret = kstrtoul(buf, 0, &invert);
if (ret < 0)
return ret;
if (invert > 1)
return -EINVAL;
trigger = invert ? env->comp_irq_trigger_inv : env->comp_irq_trigger;
mutex_lock(&env->read_lock);
if (invert != env->invert)
ret = irq_set_irq_type(env->comp_irq, trigger);
if (!ret) {
env->invert = invert;
ret = len;
}
mutex_unlock(&env->read_lock);
return ret;
}
static ssize_t envelope_show_comp_interval(struct iio_dev *indio_dev,
uintptr_t private,
struct iio_chan_spec const *ch,
char *buf)
{
struct envelope *env = iio_priv(indio_dev);
return sprintf(buf, "%u\n", env->comp_interval);
}
static ssize_t envelope_store_comp_interval(struct iio_dev *indio_dev,
uintptr_t private,
struct iio_chan_spec const *ch,
const char *buf, size_t len)
{
struct envelope *env = iio_priv(indio_dev);
unsigned long interval;
int ret;
ret = kstrtoul(buf, 0, &interval);
if (ret < 0)
return ret;
if (interval > 1000)
return -EINVAL;
mutex_lock(&env->read_lock);
env->comp_interval = interval;
mutex_unlock(&env->read_lock);
return len;
}
static const struct iio_chan_spec_ext_info envelope_detector_ext_info[] = {
{ .name = "invert",
.read = envelope_show_invert,
.write = envelope_store_invert, },
{ .name = "compare_interval",
.read = envelope_show_comp_interval,
.write = envelope_store_comp_interval, },
{ /* sentinel */ }
};
static const struct iio_chan_spec envelope_detector_iio_channel = {
.type = IIO_ALTVOLTAGE,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
| BIT(IIO_CHAN_INFO_SCALE),
.ext_info = envelope_detector_ext_info,
.indexed = 1,
};
static const struct iio_info envelope_detector_info = {
.read_raw = &envelope_detector_read_raw,
.driver_module = THIS_MODULE,
};
static int envelope_detector_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct iio_dev *indio_dev;
struct envelope *env;
enum iio_chan_type type;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*env));
if (!indio_dev)
return -ENOMEM;
platform_set_drvdata(pdev, indio_dev);
env = iio_priv(indio_dev);
env->comp_interval = 50; /* some sensible default? */
spin_lock_init(&env->comp_lock);
mutex_init(&env->read_lock);
init_completion(&env->done);
INIT_DELAYED_WORK(&env->comp_timeout, envelope_detector_timeout);
indio_dev->name = dev_name(dev);
indio_dev->dev.parent = dev;
indio_dev->dev.of_node = dev->of_node;
indio_dev->info = &envelope_detector_info;
indio_dev->channels = &envelope_detector_iio_channel;
indio_dev->num_channels = 1;
env->dac = devm_iio_channel_get(dev, "dac");
if (IS_ERR(env->dac)) {
if (PTR_ERR(env->dac) != -EPROBE_DEFER)
dev_err(dev, "failed to get dac input channel\n");
return PTR_ERR(env->dac);
}
env->comp_irq = platform_get_irq_byname(pdev, "comp");
if (env->comp_irq < 0) {
if (env->comp_irq != -EPROBE_DEFER)
dev_err(dev, "failed to get compare interrupt\n");
return env->comp_irq;
}
ret = devm_request_irq(dev, env->comp_irq, envelope_detector_comp_isr,
0, "envelope-detector", env);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to request interrupt\n");
return ret;
}
env->comp_irq_trigger = irq_get_trigger_type(env->comp_irq);
if (env->comp_irq_trigger & IRQF_TRIGGER_RISING)
env->comp_irq_trigger_inv |= IRQF_TRIGGER_FALLING;
if (env->comp_irq_trigger & IRQF_TRIGGER_FALLING)
env->comp_irq_trigger_inv |= IRQF_TRIGGER_RISING;
if (env->comp_irq_trigger & IRQF_TRIGGER_HIGH)
env->comp_irq_trigger_inv |= IRQF_TRIGGER_LOW;
if (env->comp_irq_trigger & IRQF_TRIGGER_LOW)
env->comp_irq_trigger_inv |= IRQF_TRIGGER_HIGH;
ret = iio_get_channel_type(env->dac, &type);
if (ret < 0)
return ret;
if (type != IIO_VOLTAGE) {
dev_err(dev, "dac is of the wrong type\n");
return -EINVAL;
}
ret = iio_read_max_channel_raw(env->dac, &env->dac_max);
if (ret < 0) {
dev_err(dev, "dac does not indicate its raw maximum value\n");
return ret;
}
return devm_iio_device_register(dev, indio_dev);
}
static const struct of_device_id envelope_detector_match[] = {
{ .compatible = "axentia,tse850-envelope-detector", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, envelope_detector_match);
static struct platform_driver envelope_detector_driver = {
.probe = envelope_detector_probe,
.driver = {
.name = "iio-envelope-detector",
.of_match_table = envelope_detector_match,
},
};
module_platform_driver(envelope_detector_driver);
MODULE_DESCRIPTION("Envelope detector using a DAC and a comparator");
MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
MODULE_LICENSE("GPL v2");

8
drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
View File

@ -291,15 +291,15 @@ int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev,
return -EIO;
/* Read status byte until EC is not busy. */
status = cros_ec_sensors_read_until_not_busy(st);
if (status < 0)
return status;
ret = cros_ec_sensors_read_until_not_busy(st);
if (ret < 0)
return ret;
/*
* Store the current sample id so that we can compare to the
* sample id after reading the data.
*/
samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK;
samp_id = ret & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK;
/* Read all EC data, format it, and store it into data. */
ret = cros_ec_sensors_read_data_unsafe(indio_dev, scan_mask,

10
drivers/iio/dac/Kconfig
View File

@ -200,6 +200,16 @@ config AD8801
To compile this driver as a module choose M here: the module will be called
ad8801.
config DPOT_DAC
tristate "DAC emulation using a DPOT"
depends on OF
help
Say yes here to build support for DAC emulation using a digital
potentiometer.
To compile this driver as a module, choose M here: the module will be
called dpot-dac.
config LPC18XX_DAC
tristate "NXP LPC18xx DAC driver"
depends on ARCH_LPC18XX || COMPILE_TEST

1
drivers/iio/dac/Makefile
View File

@ -22,6 +22,7 @@ obj-$(CONFIG_AD5686) += ad5686.o
obj-$(CONFIG_AD7303) += ad7303.o
obj-$(CONFIG_AD8801) += ad8801.o
obj-$(CONFIG_CIO_DAC) += cio-dac.o
obj-$(CONFIG_DPOT_DAC) += dpot-dac.o
obj-$(CONFIG_LPC18XX_DAC) += lpc18xx_dac.o
obj-$(CONFIG_M62332) += m62332.o
obj-$(CONFIG_MAX517) += max517.o

266
drivers/iio/dac/dpot-dac.c Normal file
View File

@ -0,0 +1,266 @@
/*
* IIO DAC emulation driver using a digital potentiometer
*
* Copyright (C) 2016 Axentia Technologies AB
*
* Author: Peter Rosin <peda@axentia.se>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* It is assumed that the dpot is used as a voltage divider between the
* current dpot wiper setting and the maximum resistance of the dpot. The
* divided voltage is provided by a vref regulator.
*
* .------.
* .-----------. | |
* | vref |--' .---.
* | regulator |--. | |
* '-----------' | | d |
* | | p |
* | | o | wiper
* | | t |<---------+
* | | |
* | '---' dac output voltage
* | |
* '------+------------+
*/
#include <linux/err.h>
#include <linux/iio/consumer.h>
#include <linux/iio/iio.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
struct dpot_dac {
struct regulator *vref;
struct iio_channel *dpot;
u32 max_ohms;
};
static const struct iio_chan_spec dpot_dac_iio_channel = {
.type = IIO_VOLTAGE,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
| BIT(IIO_CHAN_INFO_SCALE),
.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW),
.output = 1,
.indexed = 1,
};
static int dpot_dac_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct dpot_dac *dac = iio_priv(indio_dev);
int ret;
unsigned long long tmp;
switch (mask) {
case IIO_CHAN_INFO_RAW:
return iio_read_channel_raw(dac->dpot, val);
case IIO_CHAN_INFO_SCALE:
ret = iio_read_channel_scale(dac->dpot, val, val2);
switch (ret) {
case IIO_VAL_FRACTIONAL_LOG2:
tmp = *val * 1000000000LL;
do_div(tmp, dac->max_ohms);
tmp *= regulator_get_voltage(dac->vref) / 1000;
do_div(tmp, 1000000000LL);
*val = tmp;
return ret;
case IIO_VAL_INT:
/*
* Convert integer scale to fractional scale by
* setting the denominator (val2) to one...
*/
*val2 = 1;
ret = IIO_VAL_FRACTIONAL;
/* ...and fall through. */
case IIO_VAL_FRACTIONAL:
*val *= regulator_get_voltage(dac->vref) / 1000;
*val2 *= dac->max_ohms;
break;
}
return ret;
}
return -EINVAL;
}
static int dpot_dac_read_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals, int *type, int *length,
long mask)
{
struct dpot_dac *dac = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
*type = IIO_VAL_INT;
return iio_read_avail_channel_raw(dac->dpot, vals, length);
}
return -EINVAL;
}
static int dpot_dac_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct dpot_dac *dac = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
return iio_write_channel_raw(dac->dpot, val);
}
return -EINVAL;
}
static const struct iio_info dpot_dac_info = {
.read_raw = dpot_dac_read_raw,
.read_avail = dpot_dac_read_avail,
.write_raw = dpot_dac_write_raw,
.driver_module = THIS_MODULE,
};
static int dpot_dac_channel_max_ohms(struct iio_dev *indio_dev)
{
struct device *dev = &indio_dev->dev;
struct dpot_dac *dac = iio_priv(indio_dev);
unsigned long long tmp;
int ret;
int val;
int val2;
int max;
ret = iio_read_max_channel_raw(dac->dpot, &max);
if (ret < 0) {
dev_err(dev, "dpot does not indicate its raw maximum value\n");
return ret;
}
switch (iio_read_channel_scale(dac->dpot, &val, &val2)) {
case IIO_VAL_INT:
return max * val;
case IIO_VAL_FRACTIONAL:
tmp = (unsigned long long)max * val;
do_div(tmp, val2);
return tmp;
case IIO_VAL_FRACTIONAL_LOG2:
tmp = val * 1000000000LL * max >> val2;
do_div(tmp, 1000000000LL);
return tmp;
default:
dev_err(dev, "dpot has a scale that is too weird\n");
}
return -EINVAL;
}
static int dpot_dac_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct iio_dev *indio_dev;
struct dpot_dac *dac;
enum iio_chan_type type;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*dac));
if (!indio_dev)
return -ENOMEM;
platform_set_drvdata(pdev, indio_dev);
dac = iio_priv(indio_dev);
indio_dev->name = dev_name(dev);
indio_dev->dev.parent = dev;
indio_dev->info = &dpot_dac_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = &dpot_dac_iio_channel;
indio_dev->num_channels = 1;
dac->vref = devm_regulator_get(dev, "vref");
if (IS_ERR(dac->vref)) {
if (PTR_ERR(dac->vref) != -EPROBE_DEFER)
dev_err(&pdev->dev, "failed to get vref regulator\n");
return PTR_ERR(dac->vref);
}
dac->dpot = devm_iio_channel_get(dev, "dpot");
if (IS_ERR(dac->dpot)) {
if (PTR_ERR(dac->dpot) != -EPROBE_DEFER)
dev_err(dev, "failed to get dpot input channel\n");
return PTR_ERR(dac->dpot);
}
ret = iio_get_channel_type(dac->dpot, &type);
if (ret < 0)
return ret;
if (type != IIO_RESISTANCE) {
dev_err(dev, "dpot is of the wrong type\n");
return -EINVAL;
}
ret = dpot_dac_channel_max_ohms(indio_dev);
if (ret < 0)
return ret;
dac->max_ohms = ret;
ret = regulator_enable(dac->vref);
if (ret) {
dev_err(dev, "failed to enable the vref regulator\n");
return ret;
}
ret = iio_device_register(indio_dev);
if (ret) {
dev_err(dev, "failed to register iio device\n");
goto disable_reg;
}
return 0;
disable_reg:
regulator_disable(dac->vref);
return ret;
}
static int dpot_dac_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct dpot_dac *dac = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
regulator_disable(dac->vref);
return 0;
}
static const struct of_device_id dpot_dac_match[] = {
{ .compatible = "dpot-dac" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, dpot_dac_match);
static struct platform_driver dpot_dac_driver = {
.probe = dpot_dac_probe,
.remove = dpot_dac_remove,
.driver = {
.name = "iio-dpot-dac",
.of_match_table = dpot_dac_match,
},
};
module_platform_driver(dpot_dac_driver);
MODULE_DESCRIPTION("DAC emulation driver using a digital potentiometer");
MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
MODULE_LICENSE("GPL v2");

1
drivers/iio/gyro/Kconfig
View File

@ -93,6 +93,7 @@ config MPU3050
config MPU3050_I2C
tristate "Invensense MPU3050 devices on I2C"
depends on !(INPUT_MPU3050=y || INPUT_MPU3050=m)
depends on I2C
select MPU3050
select REGMAP_I2C
select I2C_MUX

1
drivers/iio/gyro/mpu3050-core.c
View File

@ -746,7 +746,6 @@ static const struct iio_info mpu3050_info = {
.read_raw = mpu3050_read_raw,
.write_raw = mpu3050_write_raw,
.attrs = &mpu3050_attribute_group,
.driver_module = THIS_MODULE,
};
/**

205
drivers/iio/gyro/st_gyro_core.c
View File

@ -39,79 +39,6 @@
#define ST_GYRO_FS_AVL_500DPS 500
#define ST_GYRO_FS_AVL_2000DPS 2000
/* CUSTOM VALUES FOR SENSOR 1 */
#define ST_GYRO_1_WAI_EXP 0xd3
#define ST_GYRO_1_ODR_ADDR 0x20
#define ST_GYRO_1_ODR_MASK 0xc0
#define ST_GYRO_1_ODR_AVL_100HZ_VAL 0x00
#define ST_GYRO_1_ODR_AVL_200HZ_VAL 0x01
#define ST_GYRO_1_ODR_AVL_400HZ_VAL 0x02
#define ST_GYRO_1_ODR_AVL_800HZ_VAL 0x03
#define ST_GYRO_1_PW_ADDR 0x20
#define ST_GYRO_1_PW_MASK 0x08
#define ST_GYRO_1_FS_ADDR 0x23
#define ST_GYRO_1_FS_MASK 0x30
#define ST_GYRO_1_FS_AVL_250_VAL 0x00
#define ST_GYRO_1_FS_AVL_500_VAL 0x01
#define ST_GYRO_1_FS_AVL_2000_VAL 0x02
#define ST_GYRO_1_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
#define ST_GYRO_1_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
#define ST_GYRO_1_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
#define ST_GYRO_1_BDU_ADDR 0x23
#define ST_GYRO_1_BDU_MASK 0x80
#define ST_GYRO_1_DRDY_IRQ_ADDR 0x22
#define ST_GYRO_1_DRDY_IRQ_INT2_MASK 0x08
#define ST_GYRO_1_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 2 */
#define ST_GYRO_2_WAI_EXP 0xd4
#define ST_GYRO_2_ODR_ADDR 0x20
#define ST_GYRO_2_ODR_MASK 0xc0
#define ST_GYRO_2_ODR_AVL_95HZ_VAL 0x00
#define ST_GYRO_2_ODR_AVL_190HZ_VAL 0x01
#define ST_GYRO_2_ODR_AVL_380HZ_VAL 0x02
#define ST_GYRO_2_ODR_AVL_760HZ_VAL 0x03
#define ST_GYRO_2_PW_ADDR 0x20
#define ST_GYRO_2_PW_MASK 0x08
#define ST_GYRO_2_FS_ADDR 0x23
#define ST_GYRO_2_FS_MASK 0x30
#define ST_GYRO_2_FS_AVL_250_VAL 0x00
#define ST_GYRO_2_FS_AVL_500_VAL 0x01
#define ST_GYRO_2_FS_AVL_2000_VAL 0x02
#define ST_GYRO_2_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
#define ST_GYRO_2_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
#define ST_GYRO_2_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
#define ST_GYRO_2_BDU_ADDR 0x23
#define ST_GYRO_2_BDU_MASK 0x80
#define ST_GYRO_2_DRDY_IRQ_ADDR 0x22
#define ST_GYRO_2_DRDY_IRQ_INT2_MASK 0x08
#define ST_GYRO_2_MULTIREAD_BIT true
/* CUSTOM VALUES FOR SENSOR 3 */
#define ST_GYRO_3_WAI_EXP 0xd7
#define ST_GYRO_3_ODR_ADDR 0x20
#define ST_GYRO_3_ODR_MASK 0xc0
#define ST_GYRO_3_ODR_AVL_95HZ_VAL 0x00
#define ST_GYRO_3_ODR_AVL_190HZ_VAL 0x01
#define ST_GYRO_3_ODR_AVL_380HZ_VAL 0x02
#define ST_GYRO_3_ODR_AVL_760HZ_VAL 0x03
#define ST_GYRO_3_PW_ADDR 0x20
#define ST_GYRO_3_PW_MASK 0x08
#define ST_GYRO_3_FS_ADDR 0x23
#define ST_GYRO_3_FS_MASK 0x30
#define ST_GYRO_3_FS_AVL_250_VAL 0x00
#define ST_GYRO_3_FS_AVL_500_VAL 0x01
#define ST_GYRO_3_FS_AVL_2000_VAL 0x02
#define ST_GYRO_3_FS_AVL_250_GAIN IIO_DEGREE_TO_RAD(8750)
#define ST_GYRO_3_FS_AVL_500_GAIN IIO_DEGREE_TO_RAD(17500)
#define ST_GYRO_3_FS_AVL_2000_GAIN IIO_DEGREE_TO_RAD(70000)
#define ST_GYRO_3_BDU_ADDR 0x23
#define ST_GYRO_3_BDU_MASK 0x80
#define ST_GYRO_3_DRDY_IRQ_ADDR 0x22
#define ST_GYRO_3_DRDY_IRQ_INT2_MASK 0x08
#define ST_GYRO_3_MULTIREAD_BIT true
static const struct iio_chan_spec st_gyro_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_ANGL_VEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@ -130,7 +57,7 @@ static const struct iio_chan_spec st_gyro_16bit_channels[] = {
static const struct st_sensor_settings st_gyro_sensors_settings[] = {
{
.wai = ST_GYRO_1_WAI_EXP,
.wai = 0xd3,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = L3G4200D_GYRO_DEV_NAME,
@ -138,18 +65,18 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
.addr = ST_GYRO_1_ODR_ADDR,
.mask = ST_GYRO_1_ODR_MASK,
.addr = 0x20,
.mask = 0xc0,
.odr_avl = {
{ 100, ST_GYRO_1_ODR_AVL_100HZ_VAL, },
{ 200, ST_GYRO_1_ODR_AVL_200HZ_VAL, },
{ 400, ST_GYRO_1_ODR_AVL_400HZ_VAL, },
{ 800, ST_GYRO_1_ODR_AVL_800HZ_VAL, },
{ .hz = 100, .value = 0x00, },
{ .hz = 200, .value = 0x01, },
{ .hz = 400, .value = 0x02, },
{ .hz = 800, .value = 0x03, },
},
},
.pw = {
.addr = ST_GYRO_1_PW_ADDR,
.mask = ST_GYRO_1_PW_MASK,
.addr = 0x20,
.mask = 0x08,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
@ -158,33 +85,33 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = ST_GYRO_1_FS_ADDR,
.mask = ST_GYRO_1_FS_MASK,
.addr = 0x23,
.mask = 0x30,
.fs_avl = {
[0] = {
.num = ST_GYRO_FS_AVL_250DPS,
.value = ST_GYRO_1_FS_AVL_250_VAL,
.gain = ST_GYRO_1_FS_AVL_250_GAIN,
.value = 0x00,
.gain = IIO_DEGREE_TO_RAD(8750),
},
[1] = {
.num = ST_GYRO_FS_AVL_500DPS,
.value = ST_GYRO_1_FS_AVL_500_VAL,
.gain = ST_GYRO_1_FS_AVL_500_GAIN,
.value = 0x01,
.gain = IIO_DEGREE_TO_RAD(17500),
},
[2] = {
.num = ST_GYRO_FS_AVL_2000DPS,
.value = ST_GYRO_1_FS_AVL_2000_VAL,
.gain = ST_GYRO_1_FS_AVL_2000_GAIN,
.value = 0x02,
.gain = IIO_DEGREE_TO_RAD(70000),
},
},
},
.bdu = {
.addr = ST_GYRO_1_BDU_ADDR,
.mask = ST_GYRO_1_BDU_MASK,
.addr = 0x23,
.mask = 0x80,
},
.drdy_irq = {
.addr = ST_GYRO_1_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK,
.addr = 0x22,
.mask_int2 = 0x08,
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
@ -192,11 +119,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
*/
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = ST_GYRO_1_MULTIREAD_BIT,
.multi_read_bit = true,
.bootime = 2,
},
{
.wai = ST_GYRO_2_WAI_EXP,
.wai = 0xd4,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = L3GD20_GYRO_DEV_NAME,
@ -208,18 +135,18 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
.addr = ST_GYRO_2_ODR_ADDR,
.mask = ST_GYRO_2_ODR_MASK,
.addr = 0x20,
.mask = 0xc0,
.odr_avl = {
{ 95, ST_GYRO_2_ODR_AVL_95HZ_VAL, },
{ 190, ST_GYRO_2_ODR_AVL_190HZ_VAL, },
{ 380, ST_GYRO_2_ODR_AVL_380HZ_VAL, },
{ 760, ST_GYRO_2_ODR_AVL_760HZ_VAL, },
{ .hz = 95, .value = 0x00, },
{ .hz = 190, .value = 0x01, },
{ .hz = 380, .value = 0x02, },
{ .hz = 760, .value = 0x03, },
},
},
.pw = {
.addr = ST_GYRO_2_PW_ADDR,
.mask = ST_GYRO_2_PW_MASK,
.addr = 0x20,
.mask = 0x08,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
@ -228,33 +155,33 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = ST_GYRO_2_FS_ADDR,
.mask = ST_GYRO_2_FS_MASK,
.addr = 0x23,
.mask = 0x30,
.fs_avl = {
[0] = {
.num = ST_GYRO_FS_AVL_250DPS,
.value = ST_GYRO_2_FS_AVL_250_VAL,
.gain = ST_GYRO_2_FS_AVL_250_GAIN,
.value = 0x00,
.gain = IIO_DEGREE_TO_RAD(8750),
},
[1] = {
.num = ST_GYRO_FS_AVL_500DPS,
.value = ST_GYRO_2_FS_AVL_500_VAL,
.gain = ST_GYRO_2_FS_AVL_500_GAIN,
.value = 0x01,
.gain = IIO_DEGREE_TO_RAD(17500),
},
[2] = {
.num = ST_GYRO_FS_AVL_2000DPS,
.value = ST_GYRO_2_FS_AVL_2000_VAL,
.gain = ST_GYRO_2_FS_AVL_2000_GAIN,
.value = 0x02,
.gain = IIO_DEGREE_TO_RAD(70000),
},
},
},
.bdu = {
.addr = ST_GYRO_2_BDU_ADDR,
.mask = ST_GYRO_2_BDU_MASK,
.addr = 0x23,
.mask = 0x80,
},
.drdy_irq = {
.addr = ST_GYRO_2_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK,
.addr = 0x22,
.mask_int2 = 0x08,
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
@ -262,29 +189,29 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
*/
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = ST_GYRO_2_MULTIREAD_BIT,
.multi_read_bit = true,
.bootime = 2,
},
{
.wai = ST_GYRO_3_WAI_EXP,
.wai = 0xd7,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = L3GD20_GYRO_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
.addr = ST_GYRO_3_ODR_ADDR,
.mask = ST_GYRO_3_ODR_MASK,
.addr = 0x20,
.mask = 0xc0,
.odr_avl = {
{ 95, ST_GYRO_3_ODR_AVL_95HZ_VAL, },
{ 190, ST_GYRO_3_ODR_AVL_190HZ_VAL, },
{ 380, ST_GYRO_3_ODR_AVL_380HZ_VAL, },
{ 760, ST_GYRO_3_ODR_AVL_760HZ_VAL, },
{ .hz = 95, .value = 0x00, },
{ .hz = 190, .value = 0x01, },
{ .hz = 380, .value = 0x02, },
{ .hz = 760, .value = 0x03, },
},
},
.pw = {
.addr = ST_GYRO_3_PW_ADDR,
.mask = ST_GYRO_3_PW_MASK,
.addr = 0x20,
.mask = 0x08,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
@ -293,33 +220,33 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
},
.fs = {
.addr = ST_GYRO_3_FS_ADDR,
.mask = ST_GYRO_3_FS_MASK,
.addr = 0x23,
.mask = 0x30,
.fs_avl = {
[0] = {
.num = ST_GYRO_FS_AVL_250DPS,
.value = ST_GYRO_3_FS_AVL_250_VAL,
.gain = ST_GYRO_3_FS_AVL_250_GAIN,
.value = 0x00,
.gain = IIO_DEGREE_TO_RAD(8750),
},
[1] = {
.num = ST_GYRO_FS_AVL_500DPS,
.value = ST_GYRO_3_FS_AVL_500_VAL,
.gain = ST_GYRO_3_FS_AVL_500_GAIN,
.value = 0x01,
.gain = IIO_DEGREE_TO_RAD(17500),
},
[2] = {
.num = ST_GYRO_FS_AVL_2000DPS,
.value = ST_GYRO_3_FS_AVL_2000_VAL,
.gain = ST_GYRO_3_FS_AVL_2000_GAIN,
.value = 0x02,
.gain = IIO_DEGREE_TO_RAD(70000),
},
},
},
.bdu = {
.addr = ST_GYRO_3_BDU_ADDR,
.mask = ST_GYRO_3_BDU_MASK,
.addr = 0x23,
.mask = 0x80,
},
.drdy_irq = {
.addr = ST_GYRO_3_DRDY_IRQ_ADDR,
.mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK,
.addr = 0x22,
.mask_int2 = 0x08,
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
@ -327,7 +254,7 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
*/
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = ST_GYRO_3_MULTIREAD_BIT,
.multi_read_bit = true,
.bootime = 2,
},
};

2
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
View File

@ -126,7 +126,7 @@ static int inv_mpu_probe(struct i2c_client *client,
st = iio_priv(dev_get_drvdata(&client->dev));
st->muxc = i2c_mux_alloc(client->adapter, &client->dev,
1, 0, I2C_MUX_LOCKED,
1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE,
inv_mpu6050_select_bypass,
inv_mpu6050_deselect_bypass);
if (!st->muxc) {

277
drivers/iio/industrialio-core.c
View File

@ -577,9 +577,62 @@ int of_iio_read_mount_matrix(const struct device *dev,
#endif
EXPORT_SYMBOL(of_iio_read_mount_matrix);
static ssize_t __iio_format_value(char *buf, size_t len, unsigned int type,
int size, const int *vals)
{
unsigned long long tmp;
int tmp0, tmp1;
bool scale_db = false;
switch (type) {
case IIO_VAL_INT:
return snprintf(buf, len, "%d", vals[0]);
case IIO_VAL_INT_PLUS_MICRO_DB:
scale_db = true;
case IIO_VAL_INT_PLUS_MICRO:
if (vals[1] < 0)
return snprintf(buf, len, "-%d.%06u%s", abs(vals[0]),
-vals[1], scale_db ? " dB" : "");
else
return snprintf(buf, len, "%d.%06u%s", vals[0], vals[1],
scale_db ? " dB" : "");
case IIO_VAL_INT_PLUS_NANO:
if (vals[1] < 0)
return snprintf(buf, len, "-%d.%09u", abs(vals[0]),
-vals[1]);
else
return snprintf(buf, len, "%d.%09u", vals[0], vals[1]);
case IIO_VAL_FRACTIONAL:
tmp = div_s64((s64)vals[0] * 1000000000LL, vals[1]);
tmp1 = vals[1];
tmp0 = (int)div_s64_rem(tmp, 1000000000, &tmp1);
return snprintf(buf, len, "%d.%09u", tmp0, abs(tmp1));
case IIO_VAL_FRACTIONAL_LOG2:
tmp = (s64)vals[0] * 1000000000LL >> vals[1];
tmp1 = do_div(tmp, 1000000000LL);
tmp0 = tmp;
return snprintf(buf, len, "%d.%09u", tmp0, tmp1);
case IIO_VAL_INT_MULTIPLE:
{
int i;
int l = 0;
for (i = 0; i < size; ++i) {
l += snprintf(&buf[l], len - l, "%d ", vals[i]);
if (l >= len)
break;
}
return l;
}
default:
return 0;
}
}
/**
* iio_format_value() - Formats a IIO value into its string representation
* @buf: The buffer to which the formatted value gets written
* which is assumed to be big enough (i.e. PAGE_SIZE).
* @type: One of the IIO_VAL_... constants. This decides how the val
* and val2 parameters are formatted.
* @size: Number of IIO value entries contained in vals
@ -592,50 +645,13 @@ EXPORT_SYMBOL(of_iio_read_mount_matrix);
*/
ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals)
{
unsigned long long tmp;
bool scale_db = false;
ssize_t len;
switch (type) {
case IIO_VAL_INT:
return sprintf(buf, "%d\n", vals[0]);
case IIO_VAL_INT_PLUS_MICRO_DB:
scale_db = true;
case IIO_VAL_INT_PLUS_MICRO:
if (vals[1] < 0)
return sprintf(buf, "-%d.%06u%s\n", abs(vals[0]),
-vals[1], scale_db ? " dB" : "");
else
return sprintf(buf, "%d.%06u%s\n", vals[0], vals[1],
scale_db ? " dB" : "");
case IIO_VAL_INT_PLUS_NANO:
if (vals[1] < 0)
return sprintf(buf, "-%d.%09u\n", abs(vals[0]),
-vals[1]);
else
return sprintf(buf, "%d.%09u\n", vals[0], vals[1]);
case IIO_VAL_FRACTIONAL:
tmp = div_s64((s64)vals[0] * 1000000000LL, vals[1]);
vals[0] = (int)div_s64_rem(tmp, 1000000000, &vals[1]);
return sprintf(buf, "%d.%09u\n", vals[0], abs(vals[1]));
case IIO_VAL_FRACTIONAL_LOG2:
tmp = (s64)vals[0] * 1000000000LL >> vals[1];
vals[1] = do_div(tmp, 1000000000LL);
vals[0] = tmp;
return sprintf(buf, "%d.%09u\n", vals[0], vals[1]);
case IIO_VAL_INT_MULTIPLE:
{
int i;
int len = 0;
len = __iio_format_value(buf, PAGE_SIZE, type, size, vals);
if (len >= PAGE_SIZE - 1)
return -EFBIG;
for (i = 0; i < size; ++i)
len += snprintf(&buf[len], PAGE_SIZE - len, "%d ",
vals[i]);
len += snprintf(&buf[len], PAGE_SIZE - len, "\n");
return len;
}
default:
return 0;
}
return len + sprintf(buf + len, "\n");
}
EXPORT_SYMBOL_GPL(iio_format_value);
@ -664,6 +680,119 @@ static ssize_t iio_read_channel_info(struct device *dev,
return iio_format_value(buf, ret, val_len, vals);
}
static ssize_t iio_format_avail_list(char *buf, const int *vals,
int type, int length)
{
int i;
ssize_t len = 0;
switch (type) {
case IIO_VAL_INT:
for (i = 0; i < length; i++) {
len += __iio_format_value(buf + len, PAGE_SIZE - len,
type, 1, &vals[i]);
if (len >= PAGE_SIZE)
return -EFBIG;
if (i < length - 1)
len += snprintf(buf + len, PAGE_SIZE - len,
" ");
else
len += snprintf(buf + len, PAGE_SIZE - len,
"\n");
if (len >= PAGE_SIZE)
return -EFBIG;
}
break;
default:
for (i = 0; i < length / 2; i++) {
len += __iio_format_value(buf + len, PAGE_SIZE - len,
type, 2, &vals[i * 2]);
if (len >= PAGE_SIZE)
return -EFBIG;
if (i < length / 2 - 1)
len += snprintf(buf + len, PAGE_SIZE - len,
" ");
else
len += snprintf(buf + len, PAGE_SIZE - len,
"\n");
if (len >= PAGE_SIZE)
return -EFBIG;
}
}
return len;
}
static ssize_t iio_format_avail_range(char *buf, const int *vals, int type)
{
int i;
ssize_t len;
len = snprintf(buf, PAGE_SIZE, "[");
switch (type) {
case IIO_VAL_INT:
for (i = 0; i < 3; i++) {
len += __iio_format_value(buf + len, PAGE_SIZE - len,
type, 1, &vals[i]);
if (len >= PAGE_SIZE)
return -EFBIG;
if (i < 2)
len += snprintf(buf + len, PAGE_SIZE - len,
" ");
else
len += snprintf(buf + len, PAGE_SIZE - len,
"]\n");
if (len >= PAGE_SIZE)
return -EFBIG;
}
break;
default:
for (i = 0; i < 3; i++) {
len += __iio_format_value(buf + len, PAGE_SIZE - len,
type, 2, &vals[i * 2]);
if (len >= PAGE_SIZE)
return -EFBIG;
if (i < 2)
len += snprintf(buf + len, PAGE_SIZE - len,
" ");
else
len += snprintf(buf + len, PAGE_SIZE - len,
"]\n");
if (len >= PAGE_SIZE)
return -EFBIG;
}
}
return len;
}
static ssize_t iio_read_channel_info_avail(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
const int *vals;
int ret;
int length;
int type;
ret = indio_dev->info->read_avail(indio_dev, this_attr->c,
&vals, &type, &length,
this_attr->address);
if (ret < 0)
return ret;
switch (ret) {
case IIO_AVAIL_LIST:
return iio_format_avail_list(buf, vals, type, length);
case IIO_AVAIL_RANGE:
return iio_format_avail_range(buf, vals, type);
default:
return -EINVAL;
}
}
/**
* iio_str_to_fixpoint() - Parse a fixed-point number from a string
* @str: The string to parse
@ -980,6 +1109,40 @@ static int iio_device_add_info_mask_type(struct iio_dev *indio_dev,
return attrcount;
}
static int iio_device_add_info_mask_type_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
enum iio_shared_by shared_by,
const long *infomask)
{
int i, ret, attrcount = 0;
char *avail_postfix;
for_each_set_bit(i, infomask, sizeof(infomask) * 8) {
avail_postfix = kasprintf(GFP_KERNEL,
"%s_available",
iio_chan_info_postfix[i]);
if (!avail_postfix)
return -ENOMEM;
ret = __iio_add_chan_devattr(avail_postfix,
chan,
&iio_read_channel_info_avail,
NULL,
i,
shared_by,
&indio_dev->dev,
&indio_dev->channel_attr_list);
kfree(avail_postfix);
if ((ret == -EBUSY) && (shared_by != IIO_SEPARATE))
continue;
else if (ret < 0)
return ret;
attrcount++;
}
return attrcount;
}
static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan)
{
@ -995,6 +1158,14 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
return ret;
attrcount += ret;
ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
IIO_SEPARATE,
&chan->
info_mask_separate_available);
if (ret < 0)
return ret;
attrcount += ret;
ret = iio_device_add_info_mask_type(indio_dev, chan,
IIO_SHARED_BY_TYPE,
&chan->info_mask_shared_by_type);
@ -1002,6 +1173,14 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
return ret;
attrcount += ret;
ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
IIO_SHARED_BY_TYPE,
&chan->
info_mask_shared_by_type_available);
if (ret < 0)
return ret;
attrcount += ret;
ret = iio_device_add_info_mask_type(indio_dev, chan,
IIO_SHARED_BY_DIR,
&chan->info_mask_shared_by_dir);
@ -1009,6 +1188,13 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
return ret;
attrcount += ret;
ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
IIO_SHARED_BY_DIR,
&chan->info_mask_shared_by_dir_available);
if (ret < 0)
return ret;
attrcount += ret;
ret = iio_device_add_info_mask_type(indio_dev, chan,
IIO_SHARED_BY_ALL,
&chan->info_mask_shared_by_all);
@ -1016,6 +1202,13 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
return ret;
attrcount += ret;
ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
IIO_SHARED_BY_ALL,
&chan->info_mask_shared_by_all_available);
if (ret < 0)
return ret;
attrcount += ret;
if (chan->ext_info) {
unsigned int i = 0;
for (ext_info = chan->ext_info; ext_info->name; ext_info++) {

104
drivers/iio/inkern.c
View File

@ -716,6 +716,110 @@ int iio_read_channel_scale(struct iio_channel *chan, int *val, int *val2)
}
EXPORT_SYMBOL_GPL(iio_read_channel_scale);
static int iio_channel_read_avail(struct iio_channel *chan,
const int **vals, int *type, int *length,
enum iio_chan_info_enum info)
{
if (!iio_channel_has_available(chan->channel, info))
return -EINVAL;
return chan->indio_dev->info->read_avail(chan->indio_dev, chan->channel,
vals, type, length, info);
}
int iio_read_avail_channel_raw(struct iio_channel *chan,
const int **vals, int *length)
{
int ret;
int type;
mutex_lock(&chan->indio_dev->info_exist_lock);
if (!chan->indio_dev->info) {
ret = -ENODEV;
goto err_unlock;
}
ret = iio_channel_read_avail(chan,
vals, &type, length, IIO_CHAN_INFO_RAW);
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
if (ret >= 0 && type != IIO_VAL_INT) {
/* raw values are assumed to be IIO_VAL_INT */
ret = -EINVAL;
goto err_unlock;
}
return ret;
}
EXPORT_SYMBOL_GPL(iio_read_avail_channel_raw);
static int iio_channel_read_max(struct iio_channel *chan,
int *val, int *val2, int *type,
enum iio_chan_info_enum info)
{
int unused;
const int *vals;
int length;
int ret;
if (!val2)
val2 = &unused;
ret = iio_channel_read_avail(chan, &vals, type, &length, info);
switch (ret) {
case IIO_AVAIL_RANGE:
switch (*type) {
case IIO_VAL_INT:
*val = vals[2];
break;
default:
*val = vals[4];
*val2 = vals[5];
}
return 0;
case IIO_AVAIL_LIST:
if (length <= 0)
return -EINVAL;
switch (*type) {
case IIO_VAL_INT:
*val = vals[--length];
while (length) {
if (vals[--length] > *val)
*val = vals[length];
}
break;
default:
/* FIXME: learn about max for other iio values */
return -EINVAL;
}
return 0;
default:
return ret;
}
}
int iio_read_max_channel_raw(struct iio_channel *chan, int *val)
{
int ret;
int type;
mutex_lock(&chan->indio_dev->info_exist_lock);
if (!chan->indio_dev->info) {
ret = -ENODEV;
goto err_unlock;
}
ret = iio_channel_read_max(chan, val, NULL, &type, IIO_CHAN_INFO_RAW);
err_unlock:
mutex_unlock(&chan->indio_dev->info_exist_lock);
return ret;
}
EXPORT_SYMBOL_GPL(iio_read_max_channel_raw);
int iio_get_channel_type(struct iio_channel *chan, enum iio_chan_type *type)
{
int ret = 0;

7
drivers/iio/light/Kconfig
View File

@ -338,6 +338,13 @@ config SENSORS_TSL2563
This driver can also be built as a module. If so, the module
will be called tsl2563.
config TSL2583
tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
depends on I2C
help
Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
Access ALS data via iio, sysfs.
config TSL4531
tristate "TAOS TSL4531 ambient light sensors"
depends on I2C

1
drivers/iio/light/Makefile
View File

@ -31,6 +31,7 @@ obj-$(CONFIG_SI1145) += si1145.o
obj-$(CONFIG_STK3310) += stk3310.o
obj-$(CONFIG_TCS3414) += tcs3414.o
obj-$(CONFIG_TCS3472) += tcs3472.o
obj-$(CONFIG_TSL2583) += tsl2583.o
obj-$(CONFIG_TSL4531) += tsl4531.o
obj-$(CONFIG_US5182D) += us5182d.o
obj-$(CONFIG_VCNL4000) += vcnl4000.o

607
drivers/staging/iio/light/tsl2583.c → drivers/iio/light/tsl2583.c
View File

File diff suppressed because it is too large Load Diff

376
drivers/iio/magnetometer/st_magn_core.c
View File

@ -46,139 +46,12 @@
#define ST_MAGN_FS_AVL_15000MG 15000
#define ST_MAGN_FS_AVL_16000MG 16000
/* CUSTOM VALUES FOR SENSOR 0 */
#define ST_MAGN_0_ODR_ADDR 0x00
#define ST_MAGN_0_ODR_MASK 0x1c
#define ST_MAGN_0_ODR_AVL_1HZ_VAL 0x00
#define ST_MAGN_0_ODR_AVL_2HZ_VAL 0x01
#define ST_MAGN_0_ODR_AVL_3HZ_VAL 0x02
#define ST_MAGN_0_ODR_AVL_8HZ_VAL 0x03
#define ST_MAGN_0_ODR_AVL_15HZ_VAL 0x04
#define ST_MAGN_0_ODR_AVL_30HZ_VAL 0x05
#define ST_MAGN_0_ODR_AVL_75HZ_VAL 0x06
#define ST_MAGN_0_ODR_AVL_220HZ_VAL 0x07
#define ST_MAGN_0_PW_ADDR 0x02
#define ST_MAGN_0_PW_MASK 0x03
#define ST_MAGN_0_PW_ON 0x00
#define ST_MAGN_0_PW_OFF 0x03
#define ST_MAGN_0_FS_ADDR 0x01
#define ST_MAGN_0_FS_MASK 0xe0
#define ST_MAGN_0_FS_AVL_1300_VAL 0x01
#define ST_MAGN_0_FS_AVL_1900_VAL 0x02
#define ST_MAGN_0_FS_AVL_2500_VAL 0x03
#define ST_MAGN_0_FS_AVL_4000_VAL 0x04
#define ST_MAGN_0_FS_AVL_4700_VAL 0x05
#define ST_MAGN_0_FS_AVL_5600_VAL 0x06
#define ST_MAGN_0_FS_AVL_8100_VAL 0x07
#define ST_MAGN_0_FS_AVL_1300_GAIN_XY 1100
#define ST_MAGN_0_FS_AVL_1900_GAIN_XY 855
#define ST_MAGN_0_FS_AVL_2500_GAIN_XY 670
#define ST_MAGN_0_FS_AVL_4000_GAIN_XY 450
#define ST_MAGN_0_FS_AVL_4700_GAIN_XY 400
#define ST_MAGN_0_FS_AVL_5600_GAIN_XY 330
#define ST_MAGN_0_FS_AVL_8100_GAIN_XY 230
#define ST_MAGN_0_FS_AVL_1300_GAIN_Z 980
#define ST_MAGN_0_FS_AVL_1900_GAIN_Z 760
#define ST_MAGN_0_FS_AVL_2500_GAIN_Z 600
#define ST_MAGN_0_FS_AVL_4000_GAIN_Z 400
#define ST_MAGN_0_FS_AVL_4700_GAIN_Z 355
#define ST_MAGN_0_FS_AVL_5600_GAIN_Z 295
#define ST_MAGN_0_FS_AVL_8100_GAIN_Z 205
#define ST_MAGN_0_MULTIREAD_BIT false
/* CUSTOM VALUES FOR SENSOR 1 */
#define ST_MAGN_1_WAI_EXP 0x3c
#define ST_MAGN_1_ODR_ADDR 0x00
#define ST_MAGN_1_ODR_MASK 0x1c
#define ST_MAGN_1_ODR_AVL_1HZ_VAL 0x00
#define ST_MAGN_1_ODR_AVL_2HZ_VAL 0x01
#define ST_MAGN_1_ODR_AVL_3HZ_VAL 0x02
#define ST_MAGN_1_ODR_AVL_8HZ_VAL 0x03
#define ST_MAGN_1_ODR_AVL_15HZ_VAL 0x04
#define ST_MAGN_1_ODR_AVL_30HZ_VAL 0x05
#define ST_MAGN_1_ODR_AVL_75HZ_VAL 0x06
#define ST_MAGN_1_ODR_AVL_220HZ_VAL 0x07
#define ST_MAGN_1_PW_ADDR 0x02
#define ST_MAGN_1_PW_MASK 0x03
#define ST_MAGN_1_PW_ON 0x00
#define ST_MAGN_1_PW_OFF 0x03
#define ST_MAGN_1_FS_ADDR 0x01
#define ST_MAGN_1_FS_MASK 0xe0
#define ST_MAGN_1_FS_AVL_1300_VAL 0x01
#define ST_MAGN_1_FS_AVL_1900_VAL 0x02
#define ST_MAGN_1_FS_AVL_2500_VAL 0x03
#define ST_MAGN_1_FS_AVL_4000_VAL 0x04
#define ST_MAGN_1_FS_AVL_4700_VAL 0x05
#define ST_MAGN_1_FS_AVL_5600_VAL 0x06
#define ST_MAGN_1_FS_AVL_8100_VAL 0x07
#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 909
#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 1169
#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 1492
#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 2222
#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 2500
#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 3030
#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 4347
#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 1020
#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 1315
#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 1666
#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 2500
#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 2816
#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 3389
#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 4878
#define ST_MAGN_1_MULTIREAD_BIT false
/* CUSTOM VALUES FOR SENSOR 2 */
#define ST_MAGN_2_WAI_EXP 0x3d
#define ST_MAGN_2_ODR_ADDR 0x20
#define ST_MAGN_2_ODR_MASK 0x1c
#define ST_MAGN_2_ODR_AVL_1HZ_VAL 0x00
#define ST_MAGN_2_ODR_AVL_2HZ_VAL 0x01
#define ST_MAGN_2_ODR_AVL_3HZ_VAL 0x02
#define ST_MAGN_2_ODR_AVL_5HZ_VAL 0x03
#define ST_MAGN_2_ODR_AVL_10HZ_VAL 0x04
#define ST_MAGN_2_ODR_AVL_20HZ_VAL 0x05
#define ST_MAGN_2_ODR_AVL_40HZ_VAL 0x06
#define ST_MAGN_2_ODR_AVL_80HZ_VAL 0x07
#define ST_MAGN_2_PW_ADDR 0x22
#define ST_MAGN_2_PW_MASK 0x03
#define ST_MAGN_2_PW_ON 0x00
#define ST_MAGN_2_PW_OFF 0x03
#define ST_MAGN_2_FS_ADDR 0x21
#define ST_MAGN_2_FS_MASK 0x60
#define ST_MAGN_2_FS_AVL_4000_VAL 0x00
#define ST_MAGN_2_FS_AVL_8000_VAL 0x01
#define ST_MAGN_2_FS_AVL_12000_VAL 0x02
#define ST_MAGN_2_FS_AVL_16000_VAL 0x03
#define ST_MAGN_2_FS_AVL_4000_GAIN 146
#define ST_MAGN_2_FS_AVL_8000_GAIN 292
#define ST_MAGN_2_FS_AVL_12000_GAIN 438
#define ST_MAGN_2_FS_AVL_16000_GAIN 584
#define ST_MAGN_2_MULTIREAD_BIT false
/* Special L addresses for Sensor 2 */
#define ST_MAGN_2_OUT_X_L_ADDR 0x28
#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a
#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c
/* CUSTOM VALUES FOR SENSOR 3 */
#define ST_MAGN_3_WAI_ADDR 0x4f
#define ST_MAGN_3_WAI_EXP 0x40
#define ST_MAGN_3_ODR_ADDR 0x60
#define ST_MAGN_3_ODR_MASK 0x0c
#define ST_MAGN_3_ODR_AVL_10HZ_VAL 0x00
#define ST_MAGN_3_ODR_AVL_20HZ_VAL 0x01
#define ST_MAGN_3_ODR_AVL_50HZ_VAL 0x02
#define ST_MAGN_3_ODR_AVL_100HZ_VAL 0x03
#define ST_MAGN_3_PW_ADDR 0x60
#define ST_MAGN_3_PW_MASK 0x03
#define ST_MAGN_3_PW_ON 0x00
#define ST_MAGN_3_PW_OFF 0x03
#define ST_MAGN_3_BDU_ADDR 0x62
#define ST_MAGN_3_BDU_MASK 0x10
#define ST_MAGN_3_DRDY_IRQ_ADDR 0x62
#define ST_MAGN_3_DRDY_INT_MASK 0x01
#define ST_MAGN_3_IHL_IRQ_ADDR 0x63
#define ST_MAGN_3_IHL_IRQ_MASK 0x04
#define ST_MAGN_3_FS_AVL_15000_GAIN 1500
#define ST_MAGN_3_MULTIREAD_BIT false
/* Special L addresses for sensor 3 */
#define ST_MAGN_3_OUT_X_L_ADDR 0x68
#define ST_MAGN_3_OUT_Y_L_ADDR 0x6a
#define ST_MAGN_3_OUT_Z_L_ADDR 0x6c
@ -240,77 +113,78 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
},
.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
.odr = {
.addr = ST_MAGN_0_ODR_ADDR,
.mask = ST_MAGN_0_ODR_MASK,
.addr = 0x00,
.mask = 0x1c,
.odr_avl = {
{ 1, ST_MAGN_0_ODR_AVL_1HZ_VAL, },
{ 2, ST_MAGN_0_ODR_AVL_2HZ_VAL, },
{ 3, ST_MAGN_0_ODR_AVL_3HZ_VAL, },
{ 8, ST_MAGN_0_ODR_AVL_8HZ_VAL, },
{ 15, ST_MAGN_0_ODR_AVL_15HZ_VAL, },
{ 30, ST_MAGN_0_ODR_AVL_30HZ_VAL, },
{ 75, ST_MAGN_0_ODR_AVL_75HZ_VAL, },
{ .hz = 1, .value = 0x00 },
{ .hz = 2, .value = 0x01 },
{ .hz = 3, .value = 0x02 },
{ .hz = 8, .value = 0x03 },
{ .hz = 15, .value = 0x04 },
{ .hz = 30, .value = 0x05 },
{ .hz = 75, .value = 0x06 },
/* 220 Hz, 0x07 reportedly exist */
},
},
.pw = {
.addr = ST_MAGN_0_PW_ADDR,
.mask = ST_MAGN_0_PW_MASK,
.value_on = ST_MAGN_0_PW_ON,
.value_off = ST_MAGN_0_PW_OFF,
.addr = 0x02,
.mask = 0x03,
.value_on = 0x00,
.value_off = 0x03,
},
.fs = {
.addr = ST_MAGN_0_FS_ADDR,
.mask = ST_MAGN_0_FS_MASK,
.addr = 0x01,
.mask = 0xe0,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_1300MG,
.value = ST_MAGN_0_FS_AVL_1300_VAL,
.gain = ST_MAGN_0_FS_AVL_1300_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_1300_GAIN_Z,
.value = 0x01,
.gain = 1100,
.gain2 = 980,
},
[1] = {
.num = ST_MAGN_FS_AVL_1900MG,
.value = ST_MAGN_0_FS_AVL_1900_VAL,
.gain = ST_MAGN_0_FS_AVL_1900_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_1900_GAIN_Z,
.value = 0x02,
.gain = 855,
.gain2 = 760,
},
[2] = {
.num = ST_MAGN_FS_AVL_2500MG,
.value = ST_MAGN_0_FS_AVL_2500_VAL,
.gain = ST_MAGN_0_FS_AVL_2500_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_2500_GAIN_Z,
.value = 0x03,
.gain = 670,
.gain2 = 600,
},
[3] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = ST_MAGN_0_FS_AVL_4000_VAL,
.gain = ST_MAGN_0_FS_AVL_4000_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_4000_GAIN_Z,
.value = 0x04,
.gain = 450,
.gain2 = 400,
},
[4] = {
.num = ST_MAGN_FS_AVL_4700MG,
.value = ST_MAGN_0_FS_AVL_4700_VAL,
.gain = ST_MAGN_0_FS_AVL_4700_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_4700_GAIN_Z,
.value = 0x05,
.gain = 400,
.gain2 = 355,
},
[5] = {
.num = ST_MAGN_FS_AVL_5600MG,
.value = ST_MAGN_0_FS_AVL_5600_VAL,
.gain = ST_MAGN_0_FS_AVL_5600_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_5600_GAIN_Z,
.value = 0x06,
.gain = 330,
.gain2 = 295,
},
[6] = {
.num = ST_MAGN_FS_AVL_8100MG,
.value = ST_MAGN_0_FS_AVL_8100_VAL,
.gain = ST_MAGN_0_FS_AVL_8100_GAIN_XY,
.gain2 = ST_MAGN_0_FS_AVL_8100_GAIN_Z,
.value = 0x07,
.gain = 230,
.gain2 = 205,
},
},
},
.multi_read_bit = ST_MAGN_0_MULTIREAD_BIT,
.multi_read_bit = false,
.bootime = 2,
},
{
.wai = ST_MAGN_1_WAI_EXP,
.wai = 0x3c,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LSM303DLHC_MAGN_DEV_NAME,
@ -318,175 +192,175 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
},
.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
.odr = {
.addr = ST_MAGN_1_ODR_ADDR,
.mask = ST_MAGN_1_ODR_MASK,
.addr = 0x00,
.mask = 0x1c,
.odr_avl = {
{ 1, ST_MAGN_1_ODR_AVL_1HZ_VAL, },
{ 2, ST_MAGN_1_ODR_AVL_2HZ_VAL, },
{ 3, ST_MAGN_1_ODR_AVL_3HZ_VAL, },
{ 8, ST_MAGN_1_ODR_AVL_8HZ_VAL, },
{ 15, ST_MAGN_1_ODR_AVL_15HZ_VAL, },
{ 30, ST_MAGN_1_ODR_AVL_30HZ_VAL, },
{ 75, ST_MAGN_1_ODR_AVL_75HZ_VAL, },
{ 220, ST_MAGN_1_ODR_AVL_220HZ_VAL, },
{ .hz = 1, .value = 0x00 },
{ .hz = 2, .value = 0x01 },
{ .hz = 3, .value = 0x02 },
{ .hz = 8, .value = 0x03 },
{ .hz = 15, .value = 0x04 },
{ .hz = 30, .value = 0x05 },
{ .hz = 75, .value = 0x06 },
{ .hz = 220, .value = 0x07 },
},
},
.pw = {
.addr = ST_MAGN_1_PW_ADDR,
.mask = ST_MAGN_1_PW_MASK,
.value_on = ST_MAGN_1_PW_ON,
.value_off = ST_MAGN_1_PW_OFF,
.addr = 0x02,
.mask = 0x03,
.value_on = 0x00,
.value_off = 0x03,
},
.fs = {
.addr = ST_MAGN_1_FS_ADDR,
.mask = ST_MAGN_1_FS_MASK,
.addr = 0x01,
.mask = 0xe0,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_1300MG,
.value = ST_MAGN_1_FS_AVL_1300_VAL,
.gain = ST_MAGN_1_FS_AVL_1300_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_1300_GAIN_Z,
.value = 0x01,
.gain = 909,
.gain2 = 1020,
},
[1] = {
.num = ST_MAGN_FS_AVL_1900MG,
.value = ST_MAGN_1_FS_AVL_1900_VAL,
.gain = ST_MAGN_1_FS_AVL_1900_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_1900_GAIN_Z,
.value = 0x02,
.gain = 1169,
.gain2 = 1315,
},
[2] = {
.num = ST_MAGN_FS_AVL_2500MG,
.value = ST_MAGN_1_FS_AVL_2500_VAL,
.gain = ST_MAGN_1_FS_AVL_2500_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_2500_GAIN_Z,
.value = 0x03,
.gain = 1492,
.gain2 = 1666,
},
[3] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = ST_MAGN_1_FS_AVL_4000_VAL,
.gain = ST_MAGN_1_FS_AVL_4000_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_4000_GAIN_Z,
.value = 0x04,
.gain = 2222,
.gain2 = 2500,
},
[4] = {
.num = ST_MAGN_FS_AVL_4700MG,
.value = ST_MAGN_1_FS_AVL_4700_VAL,
.gain = ST_MAGN_1_FS_AVL_4700_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_4700_GAIN_Z,
.value = 0x05,
.gain = 2500,
.gain2 = 2816,
},
[5] = {
.num = ST_MAGN_FS_AVL_5600MG,
.value = ST_MAGN_1_FS_AVL_5600_VAL,
.gain = ST_MAGN_1_FS_AVL_5600_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_5600_GAIN_Z,
.value = 0x06,
.gain = 3030,
.gain2 = 3389,
},
[6] = {
.num = ST_MAGN_FS_AVL_8100MG,
.value = ST_MAGN_1_FS_AVL_8100_VAL,
.gain = ST_MAGN_1_FS_AVL_8100_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_8100_GAIN_Z,
.value = 0x07,
.gain = 4347,
.gain2 = 4878,
},
},
},
.multi_read_bit = ST_MAGN_1_MULTIREAD_BIT,
.multi_read_bit = false,
.bootime = 2,
},
{
.wai = ST_MAGN_2_WAI_EXP,
.wai = 0x3d,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS3MDL_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
.odr = {
.addr = ST_MAGN_2_ODR_ADDR,
.mask = ST_MAGN_2_ODR_MASK,
.addr = 0x20,
.mask = 0x1c,
.odr_avl = {
{ 1, ST_MAGN_2_ODR_AVL_1HZ_VAL, },
{ 2, ST_MAGN_2_ODR_AVL_2HZ_VAL, },
{ 3, ST_MAGN_2_ODR_AVL_3HZ_VAL, },
{ 5, ST_MAGN_2_ODR_AVL_5HZ_VAL, },
{ 10, ST_MAGN_2_ODR_AVL_10HZ_VAL, },
{ 20, ST_MAGN_2_ODR_AVL_20HZ_VAL, },
{ 40, ST_MAGN_2_ODR_AVL_40HZ_VAL, },
{ 80, ST_MAGN_2_ODR_AVL_80HZ_VAL, },
{ .hz = 1, .value = 0x00 },
{ .hz = 2, .value = 0x01 },
{ .hz = 3, .value = 0x02 },
{ .hz = 5, .value = 0x03 },
{ .hz = 10, .value = 0x04 },
{ .hz = 20, .value = 0x05 },
{ .hz = 40, .value = 0x06 },
{ .hz = 80, .value = 0x07 },
},
},
.pw = {
.addr = ST_MAGN_2_PW_ADDR,
.mask = ST_MAGN_2_PW_MASK,
.value_on = ST_MAGN_2_PW_ON,
.value_off = ST_MAGN_2_PW_OFF,
.addr = 0x22,
.mask = 0x03,
.value_on = 0x00,
.value_off = 0x03,
},
.fs = {
.addr = ST_MAGN_2_FS_ADDR,
.mask = ST_MAGN_2_FS_MASK,
.addr = 0x21,
.mask = 0x60,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = ST_MAGN_2_FS_AVL_4000_VAL,
.gain = ST_MAGN_2_FS_AVL_4000_GAIN,
.value = 0x00,
.gain = 146,
},
[1] = {
.num = ST_MAGN_FS_AVL_8000MG,
.value = ST_MAGN_2_FS_AVL_8000_VAL,
.gain = ST_MAGN_2_FS_AVL_8000_GAIN,
.value = 0x01,
.gain = 292,
},
[2] = {
.num = ST_MAGN_FS_AVL_12000MG,
.value = ST_MAGN_2_FS_AVL_12000_VAL,
.gain = ST_MAGN_2_FS_AVL_12000_GAIN,
.value = 0x02,
.gain = 438,
},
[3] = {
.num = ST_MAGN_FS_AVL_16000MG,
.value = ST_MAGN_2_FS_AVL_16000_VAL,
.gain = ST_MAGN_2_FS_AVL_16000_GAIN,
.value = 0x03,
.gain = 584,
},
},
},
.multi_read_bit = ST_MAGN_2_MULTIREAD_BIT,
.multi_read_bit = false,
.bootime = 2,
},
{
.wai = ST_MAGN_3_WAI_EXP,
.wai_addr = ST_MAGN_3_WAI_ADDR,
.wai = 0x40,
.wai_addr = 0x4f,
.sensors_supported = {
[0] = LSM303AGR_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_3_16bit_channels,
.odr = {
.addr = ST_MAGN_3_ODR_ADDR,
.mask = ST_MAGN_3_ODR_MASK,
.addr = 0x60,
.mask = 0x0c,
.odr_avl = {
{ 10, ST_MAGN_3_ODR_AVL_10HZ_VAL, },
{ 20, ST_MAGN_3_ODR_AVL_20HZ_VAL, },
{ 50, ST_MAGN_3_ODR_AVL_50HZ_VAL, },
{ 100, ST_MAGN_3_ODR_AVL_100HZ_VAL, },
{ .hz = 10, .value = 0x00 },
{ .hz = 20, .value = 0x01 },
{ .hz = 50, .value = 0x02 },
{ .hz = 100, .value = 0x03 },
},
},
.pw = {
.addr = ST_MAGN_3_PW_ADDR,
.mask = ST_MAGN_3_PW_MASK,
.value_on = ST_MAGN_3_PW_ON,
.value_off = ST_MAGN_3_PW_OFF,
.addr = 0x60,
.mask = 0x03,
.value_on = 0x00,
.value_off = 0x03,
},
.fs = {
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_15000MG,
.gain = ST_MAGN_3_FS_AVL_15000_GAIN,
.gain = 1500,
},
},
},
.bdu = {
.addr = ST_MAGN_3_BDU_ADDR,
.mask = ST_MAGN_3_BDU_MASK,
.addr = 0x62,
.mask = 0x10,
},
.drdy_irq = {
.addr = ST_MAGN_3_DRDY_IRQ_ADDR,
.mask_int1 = ST_MAGN_3_DRDY_INT_MASK,
.addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR,
.mask_ihl = ST_MAGN_3_IHL_IRQ_MASK,
.addr = 0x62,
.mask_int1 = 0x01,
.addr_ihl = 0x63,
.mask_ihl = 0x04,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = ST_MAGN_3_MULTIREAD_BIT,
.multi_read_bit = false,
.bootime = 2,
},
};

104
drivers/iio/potentiometer/mcp4531.c
View File

@ -38,7 +38,7 @@
struct mcp4531_cfg {
int wipers;
int max_pos;
int avail[3];
int kohms;
};
@ -78,38 +78,38 @@ enum mcp4531_type {
};
static const struct mcp4531_cfg mcp4531_cfg[] = {
[MCP453x_502] = { .wipers = 1, .max_pos = 128, .kohms = 5, },
[MCP453x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
[MCP453x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, },
[MCP453x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, },
[MCP454x_502] = { .wipers = 1, .max_pos = 128, .kohms = 5, },
[MCP454x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
[MCP454x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, },
[MCP454x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, },
[MCP455x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, },
[MCP455x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, },
[MCP455x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
[MCP455x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
[MCP456x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, },
[MCP456x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, },
[MCP456x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
[MCP456x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
[MCP463x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, },
[MCP463x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, },
[MCP463x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, },
[MCP463x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, },
[MCP464x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, },
[MCP464x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, },
[MCP464x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, },
[MCP464x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, },
[MCP465x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, },
[MCP465x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, },
[MCP465x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, },
[MCP465x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, },
[MCP466x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, },
[MCP466x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, },
[MCP466x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, },
[MCP466x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, },
[MCP453x_502] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 5, },
[MCP453x_103] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 10, },
[MCP453x_503] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 50, },
[MCP453x_104] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 100, },
[MCP454x_502] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 5, },
[MCP454x_103] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 10, },
[MCP454x_503] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 50, },
[MCP454x_104] = { .wipers = 1, .avail = { 0, 1, 128 }, .kohms = 100, },
[MCP455x_502] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 5, },
[MCP455x_103] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 10, },
[MCP455x_503] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 50, },
[MCP455x_104] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 100, },
[MCP456x_502] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 5, },
[MCP456x_103] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 10, },
[MCP456x_503] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 50, },
[MCP456x_104] = { .wipers = 1, .avail = { 0, 1, 256 }, .kohms = 100, },
[MCP463x_502] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 5, },
[MCP463x_103] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 10, },
[MCP463x_503] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 50, },
[MCP463x_104] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 100, },
[MCP464x_502] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 5, },
[MCP464x_103] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 10, },
[MCP464x_503] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 50, },
[MCP464x_104] = { .wipers = 2, .avail = { 0, 1, 128 }, .kohms = 100, },
[MCP465x_502] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 5, },
[MCP465x_103] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 10, },
[MCP465x_503] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 50, },
[MCP465x_104] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 100, },
[MCP466x_502] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 5, },
[MCP466x_103] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 10, },
[MCP466x_503] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 50, },
[MCP466x_104] = { .wipers = 2, .avail = { 0, 1, 256 }, .kohms = 100, },
};
#define MCP4531_WRITE (0 << 2)
@ -124,13 +124,14 @@ struct mcp4531_data {
const struct mcp4531_cfg *cfg;
};
#define MCP4531_CHANNEL(ch) { \
.type = IIO_RESISTANCE, \
.indexed = 1, \
.output = 1, \
.channel = (ch), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
#define MCP4531_CHANNEL(ch) { \
.type = IIO_RESISTANCE, \
.indexed = 1, \
.output = 1, \
.channel = (ch), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_RAW), \
}
static const struct iio_chan_spec mcp4531_channels[] = {
@ -156,13 +157,31 @@ static int mcp4531_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 1000 * data->cfg->kohms;
*val2 = data->cfg->max_pos;
*val2 = data->cfg->avail[2];
return IIO_VAL_FRACTIONAL;
}
return -EINVAL;
}
static int mcp4531_read_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals, int *type, int *length,
long mask)
{
struct mcp4531_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
*length = ARRAY_SIZE(data->cfg->avail);
*vals = data->cfg->avail;
*type = IIO_VAL_INT;
return IIO_AVAIL_RANGE;
}
return -EINVAL;
}
static int mcp4531_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
@ -172,7 +191,7 @@ static int mcp4531_write_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (val > data->cfg->max_pos || val < 0)
if (val > data->cfg->avail[2] || val < 0)
return -EINVAL;
break;
default:
@ -186,6 +205,7 @@ static int mcp4531_write_raw(struct iio_dev *indio_dev,
static const struct iio_info mcp4531_info = {
.read_raw = mcp4531_read_raw,
.read_avail = mcp4531_read_avail,
.write_raw = mcp4531_write_raw,
.driver_module = THIS_MODULE,
};

257
drivers/iio/pressure/st_pressure_core.c
View File

@ -112,115 +112,24 @@
#define ST_PRESS_1_OUT_XL_ADDR 0x28
#define ST_TEMP_1_OUT_L_ADDR 0x2b
/*
* CUSTOM VALUES FOR LPS331AP SENSOR
* See LPS331AP datasheet:
* http://www2.st.com/resource/en/datasheet/lps331ap.pdf
*/
#define ST_PRESS_LPS331AP_WAI_EXP 0xbb
#define ST_PRESS_LPS331AP_ODR_ADDR 0x20
#define ST_PRESS_LPS331AP_ODR_MASK 0x70
#define ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL 0x01
#define ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL 0x05
#define ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL 0x06
#define ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL 0x07
#define ST_PRESS_LPS331AP_PW_ADDR 0x20
#define ST_PRESS_LPS331AP_PW_MASK 0x80
#define ST_PRESS_LPS331AP_FS_ADDR 0x23
#define ST_PRESS_LPS331AP_FS_MASK 0x30
#define ST_PRESS_LPS331AP_BDU_ADDR 0x20
#define ST_PRESS_LPS331AP_BDU_MASK 0x04
#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20
#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22
#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80
#define ST_PRESS_LPS331AP_OD_IRQ_ADDR 0x22
#define ST_PRESS_LPS331AP_OD_IRQ_MASK 0x40
#define ST_PRESS_LPS331AP_MULTIREAD_BIT true
/*
* CUSTOM VALUES FOR THE OBSOLETE LPS001WP SENSOR
*/
/* LPS001WP pressure resolution */
#define ST_PRESS_LPS001WP_LSB_PER_MBAR 16UL
/* LPS001WP temperature resolution */
#define ST_PRESS_LPS001WP_LSB_PER_CELSIUS 64UL
#define ST_PRESS_LPS001WP_WAI_EXP 0xba
#define ST_PRESS_LPS001WP_ODR_ADDR 0x20
#define ST_PRESS_LPS001WP_ODR_MASK 0x30
#define ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL 0x01
#define ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL 0x02
#define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL 0x03
#define ST_PRESS_LPS001WP_PW_ADDR 0x20
#define ST_PRESS_LPS001WP_PW_MASK 0x40
/* LPS001WP pressure gain */
#define ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN \
(100000000UL / ST_PRESS_LPS001WP_LSB_PER_MBAR)
#define ST_PRESS_LPS001WP_BDU_ADDR 0x20
#define ST_PRESS_LPS001WP_BDU_MASK 0x04
#define ST_PRESS_LPS001WP_MULTIREAD_BIT true
/* LPS001WP pressure and temp L addresses */
#define ST_PRESS_LPS001WP_OUT_L_ADDR 0x28
#define ST_TEMP_LPS001WP_OUT_L_ADDR 0x2a
/*
* CUSTOM VALUES FOR LPS25H SENSOR
* See LPS25H datasheet:
* http://www2.st.com/resource/en/datasheet/lps25h.pdf
*/
#define ST_PRESS_LPS25H_WAI_EXP 0xbd
#define ST_PRESS_LPS25H_ODR_ADDR 0x20
#define ST_PRESS_LPS25H_ODR_MASK 0x70
#define ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL 0x01
#define ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL 0x02
#define ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL 0x03
#define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL 0x04
#define ST_PRESS_LPS25H_PW_ADDR 0x20
#define ST_PRESS_LPS25H_PW_MASK 0x80
#define ST_PRESS_LPS25H_BDU_ADDR 0x20
#define ST_PRESS_LPS25H_BDU_MASK 0x04
#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23
#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01
#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10
#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22
#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80
#define ST_PRESS_LPS25H_OD_IRQ_ADDR 0x22
#define ST_PRESS_LPS25H_OD_IRQ_MASK 0x40
#define ST_PRESS_LPS25H_MULTIREAD_BIT true
/* LPS25H pressure and temp L addresses */
#define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28
#define ST_TEMP_LPS25H_OUT_L_ADDR 0x2b
/*
* CUSTOM VALUES FOR LPS22HB SENSOR
* See LPS22HB datasheet:
* http://www2.st.com/resource/en/datasheet/lps22hb.pdf
*/
/* LPS22HB temperature sensitivity */
#define ST_PRESS_LPS22HB_LSB_PER_CELSIUS 100UL
#define ST_PRESS_LPS22HB_WAI_EXP 0xb1
#define ST_PRESS_LPS22HB_ODR_ADDR 0x10
#define ST_PRESS_LPS22HB_ODR_MASK 0x70
#define ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL 0x01
#define ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL 0x02
#define ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL 0x03
#define ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL 0x04
#define ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL 0x05
#define ST_PRESS_LPS22HB_PW_ADDR 0x10
#define ST_PRESS_LPS22HB_PW_MASK 0x70
#define ST_PRESS_LPS22HB_BDU_ADDR 0x10
#define ST_PRESS_LPS22HB_BDU_MASK 0x02
#define ST_PRESS_LPS22HB_DRDY_IRQ_ADDR 0x12
#define ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK 0x04
#define ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK 0x08
#define ST_PRESS_LPS22HB_IHL_IRQ_ADDR 0x12
#define ST_PRESS_LPS22HB_IHL_IRQ_MASK 0x80
#define ST_PRESS_LPS22HB_OD_IRQ_ADDR 0x12
#define ST_PRESS_LPS22HB_OD_IRQ_MASK 0x40
#define ST_PRESS_LPS22HB_MULTIREAD_BIT true
static const struct iio_chan_spec st_press_1_channels[] = {
{
.type = IIO_PRESSURE,
@ -321,7 +230,12 @@ static const struct iio_chan_spec st_press_lps22hb_channels[] = {
static const struct st_sensor_settings st_press_sensors_settings[] = {
{
.wai = ST_PRESS_LPS331AP_WAI_EXP,
/*
* CUSTOM VALUES FOR LPS331AP SENSOR
* See LPS331AP datasheet:
* http://www2.st.com/resource/en/datasheet/lps331ap.pdf
*/
.wai = 0xbb,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LPS331AP_PRESS_DEV_NAME,
@ -329,24 +243,24 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.ch = (struct iio_chan_spec *)st_press_1_channels,
.num_ch = ARRAY_SIZE(st_press_1_channels),
.odr = {
.addr = ST_PRESS_LPS331AP_ODR_ADDR,
.mask = ST_PRESS_LPS331AP_ODR_MASK,
.addr = 0x20,
.mask = 0x70,
.odr_avl = {
{ 1, ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL, },
{ 7, ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL, },
{ 13, ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL, },
{ 25, ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL, },
{ .hz = 1, .value = 0x01 },
{ .hz = 7, .value = 0x05 },
{ .hz = 13, .value = 0x06 },
{ .hz = 25, .value = 0x07 },
},
},
.pw = {
.addr = ST_PRESS_LPS331AP_PW_ADDR,
.mask = ST_PRESS_LPS331AP_PW_MASK,
.addr = 0x20,
.mask = 0x80,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.fs = {
.addr = ST_PRESS_LPS331AP_FS_ADDR,
.mask = ST_PRESS_LPS331AP_FS_MASK,
.addr = 0x23,
.mask = 0x30,
.fs_avl = {
/*
* Pressure and temperature sensitivity values
@ -360,24 +274,27 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
},
},
.bdu = {
.addr = ST_PRESS_LPS331AP_BDU_ADDR,
.mask = ST_PRESS_LPS331AP_BDU_MASK,
.addr = 0x20,
.mask = 0x04,
},
.drdy_irq = {
.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
.addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR,
.mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK,
.addr = 0x22,
.mask_int1 = 0x04,
.mask_int2 = 0x20,
.addr_ihl = 0x22,
.mask_ihl = 0x80,
.addr_od = 0x22,
.mask_od = 0x40,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
.multi_read_bit = true,
.bootime = 2,
},
{
.wai = ST_PRESS_LPS001WP_WAI_EXP,
/*
* CUSTOM VALUES FOR LPS001WP SENSOR
*/
.wai = 0xba,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LPS001WP_PRESS_DEV_NAME,
@ -385,17 +302,17 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.ch = (struct iio_chan_spec *)st_press_lps001wp_channels,
.num_ch = ARRAY_SIZE(st_press_lps001wp_channels),
.odr = {
.addr = ST_PRESS_LPS001WP_ODR_ADDR,
.mask = ST_PRESS_LPS001WP_ODR_MASK,
.addr = 0x20,
.mask = 0x30,
.odr_avl = {
{ 1, ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL, },
{ 7, ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL, },
{ 13, ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL, },
{ .hz = 1, .value = 0x01 },
{ .hz = 7, .value = 0x02 },
{ .hz = 13, .value = 0x03 },
},
},
.pw = {
.addr = ST_PRESS_LPS001WP_PW_ADDR,
.mask = ST_PRESS_LPS001WP_PW_MASK,
.addr = 0x20,
.mask = 0x40,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
@ -413,17 +330,22 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
},
},
.bdu = {
.addr = ST_PRESS_LPS001WP_BDU_ADDR,
.mask = ST_PRESS_LPS001WP_BDU_MASK,
.addr = 0x20,
.mask = 0x04,
},
.drdy_irq = {
.addr = 0,
},
.multi_read_bit = ST_PRESS_LPS001WP_MULTIREAD_BIT,
.multi_read_bit = true,
.bootime = 2,
},
{
.wai = ST_PRESS_LPS25H_WAI_EXP,
/*
* CUSTOM VALUES FOR LPS25H SENSOR
* See LPS25H datasheet:
* http://www2.st.com/resource/en/datasheet/lps25h.pdf
*/
.wai = 0xbd,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LPS25H_PRESS_DEV_NAME,
@ -431,18 +353,18 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.ch = (struct iio_chan_spec *)st_press_1_channels,
.num_ch = ARRAY_SIZE(st_press_1_channels),
.odr = {
.addr = ST_PRESS_LPS25H_ODR_ADDR,
.mask = ST_PRESS_LPS25H_ODR_MASK,
.addr = 0x20,
.mask = 0x70,
.odr_avl = {
{ 1, ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL, },
{ 7, ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL, },
{ 13, ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL, },
{ 25, ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL, },
{ .hz = 1, .value = 0x01 },
{ .hz = 7, .value = 0x02 },
{ .hz = 13, .value = 0x03 },
{ .hz = 25, .value = 0x04 },
},
},
.pw = {
.addr = ST_PRESS_LPS25H_PW_ADDR,
.mask = ST_PRESS_LPS25H_PW_MASK,
.addr = 0x20,
.mask = 0x80,
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
@ -460,24 +382,29 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
},
},
.bdu = {
.addr = ST_PRESS_LPS25H_BDU_ADDR,
.mask = ST_PRESS_LPS25H_BDU_MASK,
.addr = 0x20,
.mask = 0x04,
},
.drdy_irq = {
.addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
.mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
.addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR,
.mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK,
.addr = 0x23,
.mask_int1 = 0x01,
.mask_int2 = 0x10,
.addr_ihl = 0x22,
.mask_ihl = 0x80,
.addr_od = 0x22,
.mask_od = 0x40,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
.multi_read_bit = true,
.bootime = 2,
},
{
.wai = ST_PRESS_LPS22HB_WAI_EXP,
/*
* CUSTOM VALUES FOR LPS22HB SENSOR
* See LPS22HB datasheet:
* http://www2.st.com/resource/en/datasheet/lps22hb.pdf
*/
.wai = 0xb1,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LPS22HB_PRESS_DEV_NAME,
@ -485,19 +412,19 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.ch = (struct iio_chan_spec *)st_press_lps22hb_channels,
.num_ch = ARRAY_SIZE(st_press_lps22hb_channels),
.odr = {
.addr = ST_PRESS_LPS22HB_ODR_ADDR,
.mask = ST_PRESS_LPS22HB_ODR_MASK,
.addr = 0x10,
.mask = 0x70,
.odr_avl = {
{ 1, ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL, },
{ 10, ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL, },
{ 25, ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL, },
{ 50, ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL, },
{ 75, ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL, },
{ .hz = 1, .value = 0x01 },
{ .hz = 10, .value = 0x02 },
{ .hz = 25, .value = 0x03 },
{ .hz = 50, .value = 0x04 },
{ .hz = 75, .value = 0x05 },
},
},
.pw = {
.addr = ST_PRESS_LPS22HB_PW_ADDR,
.mask = ST_PRESS_LPS22HB_PW_MASK,
.addr = 0x10,
.mask = 0x70,
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
},
.fs = {
@ -514,20 +441,20 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
},
},
.bdu = {
.addr = ST_PRESS_LPS22HB_BDU_ADDR,
.mask = ST_PRESS_LPS22HB_BDU_MASK,
.addr = 0x10,
.mask = 0x02,
},
.drdy_irq = {
.addr = ST_PRESS_LPS22HB_DRDY_IRQ_ADDR,
.mask_int1 = ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK,
.mask_int2 = ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK,
.addr_ihl = ST_PRESS_LPS22HB_IHL_IRQ_ADDR,
.mask_ihl = ST_PRESS_LPS22HB_IHL_IRQ_MASK,
.addr_od = ST_PRESS_LPS22HB_OD_IRQ_ADDR,
.mask_od = ST_PRESS_LPS22HB_OD_IRQ_MASK,
.addr = 0x12,
.mask_int1 = 0x04,
.mask_int2 = 0x08,
.addr_ihl = 0x12,
.mask_ihl = 0x80,
.addr_od = 0x12,
.mask_od = 0x40,
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = ST_PRESS_LPS22HB_MULTIREAD_BIT,
.multi_read_bit = true,
},
};

6
drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
View File

@ -1,6 +0,0 @@
What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
This property causes an internal calibration of the als gain trim
value which is later used in calculating illuminance in lux.

14
drivers/staging/iio/frequency/ad9832.c
View File

@ -211,6 +211,13 @@ static int ad9832_probe(struct spi_device *spi)
return -ENODEV;
}
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
spi_set_drvdata(spi, indio_dev);
st = iio_priv(indio_dev);
st->avdd = devm_regulator_get(&spi->dev, "avdd");
if (IS_ERR(st->avdd))
return PTR_ERR(st->avdd);
@ -233,13 +240,6 @@ static int ad9832_probe(struct spi_device *spi)
goto error_disable_avdd;
}
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev) {
ret = -ENOMEM;
goto error_disable_dvdd;
}
spi_set_drvdata(spi, indio_dev);
st = iio_priv(indio_dev);
st->mclk = pdata->mclk;
st->spi = spi;

7
drivers/staging/iio/light/Kconfig
View File

@ -13,13 +13,6 @@ config SENSORS_ISL29028
Proximity value via iio. The ISL29028 provides the concurrent sensing
of ambient light and proximity.
config TSL2583
tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
depends on I2C
help
Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
Access ALS data via iio, sysfs.
config TSL2x7x
tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
depends on I2C

1
drivers/staging/iio/light/Makefile
View File

@ -3,5 +3,4 @@
#
obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
obj-$(CONFIG_TSL2583) += tsl2583.o
obj-$(CONFIG_TSL2x7x) += tsl2x7x_core.o

28
include/linux/iio/consumer.h
View File

@ -225,6 +225,34 @@ int iio_read_channel_processed(struct iio_channel *chan, int *val);
*/
int iio_write_channel_raw(struct iio_channel *chan, int val);
/**
* iio_read_max_channel_raw() - read maximum available raw value from a given
* channel, i.e. the maximum possible value.
* @chan: The channel being queried.
* @val: Value read back.
*
* Note raw reads from iio channels are in adc counts and hence
* scale will need to be applied if standard units are required.
*/
int iio_read_max_channel_raw(struct iio_channel *chan, int *val);
/**
* iio_read_avail_channel_raw() - read available raw values from a given channel
* @chan: The channel being queried.
* @vals: Available values read back.
* @length: Number of entries in vals.
*
* Returns an error code, IIO_AVAIL_RANGE or IIO_AVAIL_LIST.
*
* For ranges, three vals are always returned; min, step and max.
* For lists, all the possible values are enumerated.
*
* Note raw available values from iio channels are in adc counts and
* hence scale will need to be applied if standard units are required.
*/
int iio_read_avail_channel_raw(struct iio_channel *chan,
const int **vals, int *length);
/**
* iio_get_channel_type() - get the type of a channel
* @channel: The channel being queried.

46
include/linux/iio/iio.h
View File

@ -225,12 +225,22 @@ struct iio_event_spec {
* endianness: little or big endian
* @info_mask_separate: What information is to be exported that is specific to
* this channel.
* @info_mask_separate_available: What availability information is to be
* exported that is specific to this channel.
* @info_mask_shared_by_type: What information is to be exported that is shared
* by all channels of the same type.
* @info_mask_shared_by_type_available: What availability information is to be
* exported that is shared by all channels of the same
* type.
* @info_mask_shared_by_dir: What information is to be exported that is shared
* by all channels of the same direction.
* @info_mask_shared_by_dir_available: What availability information is to be
* exported that is shared by all channels of the same
* direction.
* @info_mask_shared_by_all: What information is to be exported that is shared
* by all channels.
* @info_mask_shared_by_all_available: What availability information is to be
* exported that is shared by all channels.
* @event_spec: Array of events which should be registered for this
* channel.
* @num_event_specs: Size of the event_spec array.
@ -269,9 +279,13 @@ struct iio_chan_spec {
enum iio_endian endianness;
} scan_type;
long info_mask_separate;
long info_mask_separate_available;
long info_mask_shared_by_type;
long info_mask_shared_by_type_available;
long info_mask_shared_by_dir;
long info_mask_shared_by_dir_available;
long info_mask_shared_by_all;
long info_mask_shared_by_all_available;
const struct iio_event_spec *event_spec;
unsigned int num_event_specs;
const struct iio_chan_spec_ext_info *ext_info;
@ -301,6 +315,23 @@ static inline bool iio_channel_has_info(const struct iio_chan_spec *chan,
(chan->info_mask_shared_by_all & BIT(type));
}
/**
* iio_channel_has_available() - Checks if a channel has an available attribute
* @chan: The channel to be queried
* @type: Type of the available attribute to be checked
*
* Returns true if the channel supports reporting available values for the
* given attribute type, false otherwise.
*/
static inline bool iio_channel_has_available(const struct iio_chan_spec *chan,
enum iio_chan_info_enum type)
{
return (chan->info_mask_separate_available & BIT(type)) |
(chan->info_mask_shared_by_type_available & BIT(type)) |
(chan->info_mask_shared_by_dir_available & BIT(type)) |
(chan->info_mask_shared_by_all_available & BIT(type));
}
#define IIO_CHAN_SOFT_TIMESTAMP(_si) { \
.type = IIO_TIMESTAMP, \
.channel = -1, \
@ -349,6 +380,14 @@ struct iio_dev;
* max_len specifies maximum number of elements
* vals pointer can contain. val_len is used to return
* length of valid elements in vals.
* @read_avail: function to return the available values from the device.
* mask specifies which value. Note 0 means the available
* values for the channel in question. Return value
* specifies if a IIO_AVAIL_LIST or a IIO_AVAIL_RANGE is
* returned in vals. The type of the vals are returned in
* type and the number of vals is returned in length. For
* ranges, there are always three vals returned; min, step
* and max. For lists, all possible values are enumerated.
* @write_raw: function to write a value to the device.
* Parameters are the same as for read_raw.
* @write_raw_get_fmt: callback function to query the expected
@ -397,6 +436,13 @@ struct iio_info {
int *val_len,
long mask);
int (*read_avail)(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals,
int *type,
int *length,
long mask);
int (*write_raw)(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,

5
include/linux/iio/types.h
View File

@ -29,4 +29,9 @@ enum iio_event_info {
#define IIO_VAL_FRACTIONAL 10
#define IIO_VAL_FRACTIONAL_LOG2 11
enum iio_available_type {
IIO_AVAIL_LIST,
IIO_AVAIL_RANGE,
};
#endif /* _IIO_TYPES_H_ */