remoteproc updates for v6.6

Support for booting the iMX remoteprocs using MMIO, instead of SMCCC is added. The iMX driver is also extended to support delivering interrupts from an arbitrary number of vdev. Support is added to the TI PRU driver, to allow GPMUX to be controlled from DeviceTree. The Qualcomm coredump collector is extended to fall back to generating a full coredump, in the case that the loaded firmware doesn't support generating minidump. The overly terse MD abbreviation of "MINIDUMP" is expanded, to make the code easier on the eye. The list of Qualcomm Sensor Low Power Island (SLPI) instances supported is cleaned up, and SDM845 is added. SDM630/636/660 support for the modem subsystem (mss) is added. All the Qualcomm drivers are transitioned to of_reserved_mem_lookup() instead of open coding the resolution of reserved-memory regions, to gain handling of error cases. A couple of drivers are transitioned to use devm_platform_ioremap_resource_byname(). The stm32 remoteproc driver's PM operations are updated to modern macros, to avoid the "unused variable"-warning in some configurations. Drivers are transitioned away from directly including of_device.h. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmT2AqkVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FvWMQALC4zy9ZNMLDNmfD4uO8u5R65eWv MzZqqsIVjmdcNcrJykKdIw33gBo50zw6AHcZjSdhOHdGvi/g8vQERhVO1k4dMzII JepoWG5HHY2nffr8LNQzG2HD0n4l6CQV3Ftg0/JlAhO1ADJz70HME3tUOiizLQUP TfIfF0pkmcjHERFNe+ESdWqkw+DUGGHXSs+b4f8jjqBvKSYayPo02wSAw/koV44a DJlw4U2omP76NWu30prqGqGvdB1ADwLcVLAFJg7+1c5ttqsZcz/SOZRlHbss200F 5JuM5IF6HJgq2E9Cst+iWlH1ZtiMFFf+ZRmHv48BImpaBdeTcZuEz9k42ay3eVwJ FghK77c63MbICBOQiQv+QeGr5c49pU1UbioxtIKa3MmNE6gE/qHaLerHXyxd5XTq dhxuqFNgq4xClq9H8CUTkugSvHLvXiaZim240N2715GYL2VR4ZfAkM1xywBEKu32 WZ61ueb0oZWYFUui2KrPgjvlQzf5ZtTs+1y000WJypaoCXU2kcq/zAvjMJlReYDu d97sntyy2Deae7ko/sMz4XrICQCug0WTE5PFXOCttWsYOJ8DvSvhND5fVmxc/uA3 Gd+HdnLOc+RfKXiL5BoVf+BUIeuKTNaMutkIabcGTvgPPbJlic7iw6kR8NqCQ+mr U8E4hulg1I9aXwu4 =BV3w -----END PGP SIGNATURE----- Merge tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "Support for booting the iMX remoteprocs using MMIO, instead of SMCCC is added. The iMX driver is also extended to support delivering interrupts from an arbitrary number of vdev. Support is added to the TI PRU driver, to allow GPMUX to be controlled from DeviceTree. The Qualcomm coredump collector is extended to fall back to generating a full coredump, in the case that the loaded firmware doesn't support generating minidump. The overly terse MD abbreviation of "MINIDUMP" is expanded, to make the code easier on the eye. The list of Qualcomm Sensor Low Power Island (SLPI) instances supported is cleaned up, and SDM845 is added. SDM630/636/660 support for the modem subsystem (mss) is added. All the Qualcomm drivers are transitioned to of_reserved_mem_lookup() instead of open coding the resolution of reserved-memory regions, to gain handling of error cases. A couple of drivers are transitioned to use devm_platform_ioremap_resource_byname(). The stm32 remoteproc driver's PM operations are updated to modern macros, to avoid the "unused variable"-warning in some configurations. Drivers are transitioned away from directly including of_device.h" * tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits) remoteproc: pru: add support for configuring GPMUX based on client setup remoteproc: stm32: fix incorrect optional pointers remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO dt-bindings: remoteproc: imx_rproc: Support i.MX8MN/P MMIO dt-bindings: remoteproc: qcom,msm8996-mss-pil: Fix 8996 clocks remoteproc: qcom: pas: add SDM845 SLPI compatible remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660 dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible remoteproc: qcom: Expand MD_* as MINIDUMP_* remoteproc: qcom: pas: refactor SLPI remoteproc init dt-bindings: remoteproc: qcom: adsp: add qcom,sdm845-slpi-pas compatible remoteproc: qcom: wcnss: use devm_platform_ioremap_resource_byname() remoteproc: qcom: q6v5: use devm_platform_ioremap_resource_byname() dt-bindings: remoteproc: qcom: sm6115-pas: Add QCM2290 remoteproc: qcom: Add full coredump fallback mechanism remoteproc: core: Export the rproc coredump APIs remoteproc: qcom: Use of_reserved_mem_lookup() remoteproc: imx_rproc: iterate all notifiyids in rx callback dt-bindings: remoteproc: qcom,adsp: bring back firmware-name dt-bindings: remoteproc: qcom,sm8550-pas: require memory-region ...
2024-11-10 14:11:52 +00:00 · 2023-09-04 15:12:26 -07:00 · 2023-09-04 15:12:26 -07:00 · 2a3a850ed0
commit 2a3a850ed0
parent 3d904704c8 18cf4fcd7b
36 changed files with 366 additions and 177 deletions
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@ -20,7 +20,9 @@ properties:
      - fsl,imx7ulp-cm4
      - fsl,imx8mm-cm4
      - fsl,imx8mn-cm7
+      - fsl,imx8mn-cm7-mmio
      - fsl,imx8mp-cm7
+      - fsl,imx8mp-cm7-mmio
      - fsl,imx8mq-cm4
      - fsl,imx8qm-cm4
      - fsl,imx8qxp-cm4
@ -70,6 +72,11 @@ properties:
    description:
      Specify CPU entry address for SCU enabled processor.

+  fsl,iomuxc-gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to IOMUXC GPR block which provide access to CM7 CPUWAIT bit.
+
  fsl,resource-id:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
@ -79,6 +86,19 @@ properties:
 required:
  - compatible

+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx8mn-cm7-mmio
+                - fsl,imx8mp-cm7-mmio
+    then:
+      properties:
+        fsl,iomuxc-gpr: false
+
 additionalProperties: false

 examples:
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@ -26,6 +26,7 @@ properties:
      - qcom,sdm660-adsp-pas
      - qcom,sdm845-adsp-pas
      - qcom,sdm845-cdsp-pas
+      - qcom,sdm845-slpi-pas

  reg:
    maxItems: 1
@ -44,8 +45,13 @@ properties:
    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

+  firmware-name:
+    maxItems: 1
+    description: Firmware name for the Hexagon core
+
 required:
  - compatible
+  - memory-region

 unevaluatedProperties: false

@ -63,6 +69,7 @@ allOf:
              - qcom,msm8998-adsp-pas
              - qcom,sdm845-adsp-pas
              - qcom,sdm845-cdsp-pas
+              - qcom,sdm845-slpi-pas
    then:
      properties:
        clocks:
@ -104,6 +111,7 @@ allOf:
              - qcom,msm8998-slpi-pas
              - qcom,sdm845-adsp-pas
              - qcom,sdm845-cdsp-pas
+              - qcom,sdm845-slpi-pas
    then:
      properties:
        interrupts:
@ -157,6 +165,22 @@ allOf:
      required:
        - px-supply

+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sdm845-slpi-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
  - if:
      properties:
        compatible:
--- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
@ -19,6 +19,7 @@ properties:
    enum:
      - qcom,msm8996-mss-pil
      - qcom,msm8998-mss-pil
+      - qcom,sdm660-mss-pil
      - qcom,sdm845-mss-pil

  reg:
@ -215,13 +216,12 @@ allOf:
            - description: GCC MSS IFACE clock
            - description: GCC MSS BUS clock
            - description: GCC MSS MEM clock
-            - description: RPMH XO clock
+            - description: RPM XO clock
            - description: GCC MSS GPLL0 clock
            - description: GCC MSS SNOC_AXI clock
            - description: GCC MSS MNOC_AXI clock
-            - description: RPMH PNOC clock
-            - description: GCC MSS PRNG clock
-            - description: RPMH QDSS clock
+            - description: RPM PNOC clock
+            - description: RPM QDSS clock
        clock-names:
          items:
            - const: iface
@ -245,7 +245,9 @@ allOf:
  - if:
      properties:
        compatible:
-          const: qcom,msm8998-mss-pil
+          enum:
+            - qcom,msm8998-mss-pil
+            - qcom,sdm660-mss-pil
    then:
      properties:
        clocks:
--- a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
@ -82,7 +82,6 @@ required:
  - clock-names
  - interrupts
  - interrupt-names
-  - memory-region
  - qcom,smem-states
  - qcom,smem-state-names

--- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
@ -42,7 +42,7 @@ properties:
  smd-edge: false

  memory-region:
-    minItems: 1
+    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  firmware-name:
@ -52,6 +52,7 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
@ -51,7 +51,7 @@ properties:
      - const: mss

  memory-region:
-    minItems: 1
+    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  qcom,qmp:
@ -67,6 +67,7 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
@ -38,7 +38,7 @@ properties:
  smd-edge: false

  memory-region:
-    minItems: 1
+    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  firmware-name:
@ -48,6 +48,7 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
@ -38,7 +38,7 @@ properties:
  smd-edge: false

  memory-region:
-    minItems: 1
+    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  firmware-name:
@ -48,6 +48,7 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml
@ -46,7 +46,7 @@ properties:
      - const: mss

  memory-region:
-    minItems: 1
+    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  qcom,qmp:
@ -62,6 +62,7 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml
@ -15,10 +15,19 @@ description:

 properties:
  compatible:
-    enum:
-      - qcom,sm6115-adsp-pas
-      - qcom,sm6115-cdsp-pas
-      - qcom,sm6115-mpss-pas
+    oneOf:
+      - enum:
+          - qcom,sm6115-adsp-pas
+          - qcom,sm6115-cdsp-pas
+          - qcom,sm6115-mpss-pas
+
+      - items:
+          - const: qcom,qcm2290-adsp-pas
+          - const: qcom,sm6115-adsp-pas
+
+      - items:
+          - const: qcom,qcm2290-mpss-pas
+          - const: qcom,sm6115-mpss-pas

  reg:
    maxItems: 1
@ -32,7 +41,7 @@ properties:
      - const: xo

  memory-region:
-    minItems: 1
+    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  smd-edge: false
@ -44,15 +53,17 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
  - if:
      properties:
        compatible:
-          enum:
-            - qcom,sm6115-adsp-pas
-            - qcom,sm6115-cdsp-pas
+          contains:
+            enum:
+              - qcom,sm6115-adsp-pas
+              - qcom,sm6115-cdsp-pas
    then:
      properties:
        interrupts:
@ -69,9 +80,10 @@ allOf:
  - if:
      properties:
        compatible:
-          enum:
-            - qcom,sm6115-cdsp-pas
-            - qcom,sm6115-mpss-pas
+          contains:
+            enum:
+              - qcom,sm6115-cdsp-pas
+              - qcom,sm6115-mpss-pas
    then:
      properties:
        power-domains:
@ -84,8 +96,9 @@ allOf:
  - if:
      properties:
        compatible:
-          enum:
-            - qcom,sm6115-adsp-pas
+          contains:
+            enum:
+              - qcom,sm6115-adsp-pas
    then:
      properties:
        power-domains:
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
@ -36,7 +36,7 @@ properties:
    description: Reference to the AOSS side-channel message RAM.

  memory-region:
-    minItems: 1
+    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  smd-edge: false
@ -48,6 +48,7 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
@ -40,7 +40,7 @@ properties:
    description: Reference to the AOSS side-channel message RAM.

  memory-region:
-    minItems: 1
+    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  smd-edge: false
@ -52,6 +52,7 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
@ -43,7 +43,7 @@ properties:
  smd-edge: false

  memory-region:
-    minItems: 1
+    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  firmware-name:
@ -53,6 +53,7 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
@ -53,6 +53,7 @@ properties:
 required:
  - compatible
  - reg
+  - memory-region

 allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@ -12,8 +12,7 @@
 #include <linux/mailbox_client.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@ -13,9 +13,9 @@
 #include <linux/mailbox_client.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_reserved_mem.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/regmap.h>
@ -40,6 +40,12 @@
 #define IMX7D_M4_STOP			(IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST | \
 					 IMX7D_SW_M4C_NON_SCLR_RST)

+#define IMX8M_M7_STOP			(IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST)
+#define IMX8M_M7_POLL			IMX7D_ENABLE_M4
+
+#define IMX8M_GPR22			0x58
+#define IMX8M_GPR22_CM7_CPUWAIT		BIT(0)
+
 /* Address: 0x020D8000 */
 #define IMX6SX_SRC_SCR			0x00
 #define IMX6SX_ENABLE_M4		BIT(22)
@ -91,6 +97,7 @@ static int imx_rproc_detach_pd(struct rproc *rproc);
 struct imx_rproc {
 	struct device			*dev;
 	struct regmap			*regmap;
+	struct regmap			*gpr;
 	struct rproc			*rproc;
 	const struct imx_rproc_dcfg	*dcfg;
 	struct imx_rproc_mem		mem[IMX_RPROC_MEM_MAX];
@ -285,6 +292,18 @@ static const struct imx_rproc_att imx_rproc_att_imx6sx[] = {
 	{ 0x80000000, 0x80000000, 0x60000000, 0 },
 };

+static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn_mmio = {
+	.src_reg	= IMX7D_SRC_SCR,
+	.src_mask	= IMX7D_M4_RST_MASK,
+	.src_start	= IMX7D_M4_START,
+	.src_stop	= IMX8M_M7_STOP,
+	.gpr_reg	= IMX8M_GPR22,
+	.gpr_wait	= IMX8M_GPR22_CM7_CPUWAIT,
+	.att		= imx_rproc_att_imx8mn,
+	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mn),
+	.method		= IMX_RPROC_MMIO,
+};
+
 static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn = {
 	.att		= imx_rproc_att_imx8mn,
 	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mn),
@ -365,8 +384,14 @@ static int imx_rproc_start(struct rproc *rproc)

 	switch (dcfg->method) {
 	case IMX_RPROC_MMIO:
-		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
-					 dcfg->src_start);
+		if (priv->gpr) {
+			ret = regmap_clear_bits(priv->gpr, dcfg->gpr_reg,
+						dcfg->gpr_wait);
+		} else {
+			ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
+						 dcfg->src_mask,
+						 dcfg->src_start);
+		}
 		break;
 	case IMX_RPROC_SMC:
 		arm_smccc_smc(IMX_SIP_RPROC, IMX_SIP_RPROC_START, 0, 0, 0, 0, 0, 0, &res);
@ -395,6 +420,16 @@ static int imx_rproc_stop(struct rproc *rproc)

 	switch (dcfg->method) {
 	case IMX_RPROC_MMIO:
+		if (priv->gpr) {
+			ret = regmap_set_bits(priv->gpr, dcfg->gpr_reg,
+					      dcfg->gpr_wait);
+			if (ret) {
+				dev_err(priv->dev,
+					"Failed to quiescence M4 platform!\n");
+				return ret;
+			}
+		}
+
 		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
 					 dcfg->src_stop);
 		break;
@ -725,13 +760,22 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
 	return 0;
 }

+static int imx_rproc_notified_idr_cb(int id, void *ptr, void *data)
+{
+	struct rproc *rproc = data;
+
+	rproc_vq_interrupt(rproc, id);
+
+	return 0;
+}
+
 static void imx_rproc_vq_work(struct work_struct *work)
 {
 	struct imx_rproc *priv = container_of(work, struct imx_rproc,
 					      rproc_work);
+	struct rproc *rproc = priv->rproc;

-	rproc_vq_interrupt(priv->rproc, 0);
-	rproc_vq_interrupt(priv->rproc, 1);
+	idr_for_each(&rproc->notifyids, imx_rproc_notified_idr_cb, rproc);
 }

 static void imx_rproc_rx_callback(struct mbox_client *cl, void *msg)
@ -983,6 +1027,10 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
 		break;
 	}

+	priv->gpr = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,iomuxc-gpr");
+	if (IS_ERR(priv->gpr))
+		priv->gpr = NULL;
+
 	regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
 	if (IS_ERR(regmap)) {
 		dev_err(dev, "failed to find syscon\n");
@ -992,6 +1040,19 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
 	priv->regmap = regmap;
 	regmap_attach_dev(dev, regmap, &config);

+	if (priv->gpr) {
+		ret = regmap_read(priv->gpr, dcfg->gpr_reg, &val);
+		if (val & dcfg->gpr_wait) {
+			/*
+			 * After cold boot, the CM indicates its in wait
+			 * state, but not fully powered off. Power it off
+			 * fully so firmware can be loaded into it.
+			 */
+			imx_rproc_stop(priv->rproc);
+			return 0;
+		}
+	}
+
 	ret = regmap_read(regmap, dcfg->src_reg, &val);
 	if (ret) {
 		dev_err(dev, "Failed to read src\n");
@ -1133,6 +1194,8 @@ static const struct of_device_id imx_rproc_of_match[] = {
 	{ .compatible = "fsl,imx8mm-cm4", .data = &imx_rproc_cfg_imx8mq },
 	{ .compatible = "fsl,imx8mn-cm7", .data = &imx_rproc_cfg_imx8mn },
 	{ .compatible = "fsl,imx8mp-cm7", .data = &imx_rproc_cfg_imx8mn },
+	{ .compatible = "fsl,imx8mn-cm7-mmio", .data = &imx_rproc_cfg_imx8mn_mmio },
+	{ .compatible = "fsl,imx8mp-cm7-mmio", .data = &imx_rproc_cfg_imx8mn_mmio },
 	{ .compatible = "fsl,imx8qxp-cm4", .data = &imx_rproc_cfg_imx8qxp },
 	{ .compatible = "fsl,imx8qm-cm4", .data = &imx_rproc_cfg_imx8qm },
 	{ .compatible = "fsl,imx8ulp-cm33", .data = &imx_rproc_cfg_imx8ulp },
--- a/drivers/remoteproc/imx_rproc.h
+++ b/drivers/remoteproc/imx_rproc.h
@ -31,6 +31,8 @@ struct imx_rproc_dcfg {
 	u32				src_mask;
 	u32				src_start;
 	u32				src_stop;
+	u32				gpr_reg;
+	u32				gpr_wait;
 	const struct imx_rproc_att	*att;
 	size_t				att_size;
 	enum imx_rproc_method		method;
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@ -19,7 +19,8 @@
 #include <linux/clk/ti.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@ -16,8 +16,9 @@
 #include <linux/debugfs.h>
 #include <linux/irqdomain.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/platform_device.h>
 #include <linux/remoteproc/pruss.h>
 #include <linux/pruss_driver.h>
 #include <linux/remoteproc.h>
@ -109,6 +110,7 @@ struct pru_private_data {
 * @dbg_single_step: debug state variable to set PRU into single step mode
 * @dbg_continuous: debug state variable to restore PRU execution mode
 * @evt_count: number of mapped events
+ * @gpmux_save: saved value for gpmux config
 */
 struct pru_rproc {
 	int id;
@ -127,6 +129,7 @@ struct pru_rproc {
 	u32 dbg_single_step;
 	u32 dbg_continuous;
 	u8 evt_count;
+	u8 gpmux_save;
 };

 static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg)
@ -228,6 +231,7 @@ struct rproc *pru_rproc_get(struct device_node *np, int index,
 	struct device *dev;
 	const char *fw_name;
 	int ret;
+	u32 mux;

 	rproc = __pru_rproc_get(np, index);
 	if (IS_ERR(rproc))
@ -252,6 +256,23 @@ struct rproc *pru_rproc_get(struct device_node *np, int index,
 	if (pru_id)
 		*pru_id = pru->id;

+	ret = pruss_cfg_get_gpmux(pru->pruss, pru->id, &pru->gpmux_save);
+	if (ret) {
+		dev_err(dev, "failed to get cfg gpmux: %d\n", ret);
+		goto err;
+	}
+
+	/* An error here is acceptable for backward compatibility */
+	ret = of_property_read_u32_index(np, "ti,pruss-gp-mux-sel", index,
+					 &mux);
+	if (!ret) {
+		ret = pruss_cfg_set_gpmux(pru->pruss, pru->id, mux);
+		if (ret) {
+			dev_err(dev, "failed to set cfg gpmux: %d\n", ret);
+			goto err;
+		}
+	}
+
 	ret = of_property_read_string_index(np, "firmware-name", index,
 					    &fw_name);
 	if (!ret) {
@ -290,6 +311,8 @@ void pru_rproc_put(struct rproc *rproc)

 	pru = rproc->priv;

+	pruss_cfg_set_gpmux(pru->pruss, pru->id, pru->gpmux_save);
+
 	pru_rproc_set_firmware(rproc, NULL);

 	mutex_lock(&pru->lock);
--- a/drivers/remoteproc/qcom_common.c
+++ b/drivers/remoteproc/qcom_common.c
@ -29,9 +29,9 @@
 #define MAX_NUM_OF_SS           10
 #define MAX_REGION_NAME_LENGTH  16
 #define SBL_MINIDUMP_SMEM_ID	602
-#define MD_REGION_VALID		('V' << 24 | 'A' << 16 | 'L' << 8 | 'I' << 0)
-#define MD_SS_ENCR_DONE		('D' << 24 | 'O' << 16 | 'N' << 8 | 'E' << 0)
-#define MD_SS_ENABLED		('E' << 24 | 'N' << 16 | 'B' << 8 | 'L' << 0)
+#define MINIDUMP_REGION_VALID		('V' << 24 | 'A' << 16 | 'L' << 8 | 'I' << 0)
+#define MINIDUMP_SS_ENCR_DONE		('D' << 24 | 'O' << 16 | 'N' << 8 | 'E' << 0)
+#define MINIDUMP_SS_ENABLED		('E' << 24 | 'N' << 16 | 'B' << 8 | 'L' << 0)

 /**
 * struct minidump_region - Minidump region
@ -125,7 +125,7 @@ static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsy

 	for (i = 0; i < seg_cnt; i++) {
 		memcpy_fromio(&region, ptr + i, sizeof(region));
-		if (le32_to_cpu(region.valid) == MD_REGION_VALID) {
+		if (le32_to_cpu(region.valid) == MINIDUMP_REGION_VALID) {
 			name = kstrndup(region.name, MAX_REGION_NAME_LENGTH - 1, GFP_KERNEL);
 			if (!name) {
 				iounmap(ptr);
@ -168,12 +168,21 @@ void qcom_minidump(struct rproc *rproc, unsigned int minidump_id,
 	 */
 	if (subsystem->regions_baseptr == 0 ||
 	    le32_to_cpu(subsystem->status) != 1 ||
-	    le32_to_cpu(subsystem->enabled) != MD_SS_ENABLED ||
-	    le32_to_cpu(subsystem->encryption_status) != MD_SS_ENCR_DONE) {
+	    le32_to_cpu(subsystem->enabled) != MINIDUMP_SS_ENABLED) {
+		return rproc_coredump(rproc);
+	}
+
+	if (le32_to_cpu(subsystem->encryption_status) != MINIDUMP_SS_ENCR_DONE) {
 		dev_err(&rproc->dev, "Minidump not ready, skipping\n");
 		return;
 	}

+	/**
+	 * Clear out the dump segments populated by parse_fw before
+	 * re-populating them with minidump segments.
+	 */
+	rproc_coredump_cleanup(rproc);
+
 	ret = qcom_add_minidump_segments(rproc, subsystem, rproc_dumpfn_t);
 	if (ret) {
 		dev_err(&rproc->dev, "Failed with error: %d while adding minidump entries\n", ret);
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@ -14,8 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
@ -637,28 +637,26 @@ static int adsp_init_mmio(struct qcom_adsp *adsp,

 static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
 {
+	struct reserved_mem *rmem = NULL;
 	struct device_node *node;
-	struct resource r;
-	int ret;

 	node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0);
-	if (!node) {
-		dev_err(adsp->dev, "no memory-region specified\n");
+	if (node)
+		rmem = of_reserved_mem_lookup(node);
+	of_node_put(node);
+
+	if (!rmem) {
+		dev_err(adsp->dev, "unable to resolve memory-region\n");
 		return -EINVAL;
 	}

-	ret = of_address_to_resource(node, 0, &r);
-	of_node_put(node);
-	if (ret)
-		return ret;
-
-	adsp->mem_phys = adsp->mem_reloc = r.start;
-	adsp->mem_size = resource_size(&r);
+	adsp->mem_phys = adsp->mem_reloc = rmem->base;
+	adsp->mem_size = rmem->size;
 	adsp->mem_region = devm_ioremap_wc(adsp->dev,
 				adsp->mem_phys, adsp->mem_size);
 	if (!adsp->mem_region) {
 		dev_err(adsp->dev, "unable to map memory region: %pa+%zx\n",
-			&r.start, adsp->mem_size);
+			&rmem->base, adsp->mem_size);
 		return -EBUSY;
 	}

--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@ -15,9 +15,9 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/of_reserved_mem.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
@ -71,6 +71,7 @@
 #define QDSP6SS_MEM_PWR_CTL		0x0B0
 #define QDSP6V6SS_MEM_PWR_CTL		0x034
 #define QDSP6SS_STRAP_ACC		0x110
+#define QDSP6V62SS_BHS_STATUS		0x0C4

 /* AXI Halt Register Offsets */
 #define AXI_HALTREQ_REG			0x0
@ -123,6 +124,7 @@
 #define QDSP6v56_CLAMP_QMC_MEM		BIT(22)
 #define QDSP6SS_XO_CBCR		0x0038
 #define QDSP6SS_ACC_OVERRIDE_VAL		0x20
+#define QDSP6v55_BHS_EN_REST_ACK	BIT(0)

 /* QDSP6v65 parameters */
 #define QDSP6SS_CORE_CBCR		0x20
@ -130,6 +132,7 @@
 #define QDSP6SS_BOOT_CORE_START         0x400
 #define QDSP6SS_BOOT_CMD                0x404
 #define BOOT_FSM_TIMEOUT                10000
+#define BHS_CHECK_MAX_LOOPS             200

 struct reg_info {
 	struct regulator *reg;
@ -250,6 +253,7 @@ enum {
 	MSS_MSM8998,
 	MSS_SC7180,
 	MSS_SC7280,
+	MSS_SDM660,
 	MSS_SDM845,
 };

@ -700,7 +704,8 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 	} else if (qproc->version == MSS_MSM8909 ||
 		   qproc->version == MSS_MSM8953 ||
 		   qproc->version == MSS_MSM8996 ||
-		   qproc->version == MSS_MSM8998) {
+		   qproc->version == MSS_MSM8998 ||
+		   qproc->version == MSS_SDM660) {

 		if (qproc->version != MSS_MSM8909 &&
 		    qproc->version != MSS_MSM8953)
@ -734,6 +739,16 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 		val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
 		udelay(1);

+		if (qproc->version == MSS_SDM660) {
+			ret = readl_relaxed_poll_timeout(qproc->reg_base + QDSP6V62SS_BHS_STATUS,
+							 i, (i & QDSP6v55_BHS_EN_REST_ACK),
+							 1, BHS_CHECK_MAX_LOOPS);
+			if (ret == -ETIMEDOUT) {
+				dev_err(qproc->dev, "BHS_EN_REST_ACK not set!\n");
+				return -ETIMEDOUT;
+			}
+		}
+
 		/* Put LDO in bypass mode */
 		val |= QDSP6v56_LDO_BYP;
 		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
@ -756,7 +771,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 				mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL;
 				i = 19;
 			} else {
-				/* MSS_MSM8998 */
+				/* MSS_MSM8998, MSS_SDM660 */
 				mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL;
 				i = 28;
 			}
@ -1875,8 +1890,6 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
 	struct device_node *child;
 	struct reserved_mem *rmem;
 	struct device_node *node;
-	struct resource r;
-	int ret;

 	/*
 	 * In the absence of mba/mpss sub-child, extract the mba and mpss
@ -1891,15 +1904,20 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
 		of_node_put(child);
 	}

-	ret = of_address_to_resource(node, 0, &r);
-	of_node_put(node);
-	if (ret) {
-		dev_err(qproc->dev, "unable to resolve mba region\n");
-		return ret;
+	if (!node) {
+		dev_err(qproc->dev, "no mba memory-region specified\n");
+		return -EINVAL;
 	}

-	qproc->mba_phys = r.start;
-	qproc->mba_size = resource_size(&r);
+	rmem = of_reserved_mem_lookup(node);
+	of_node_put(node);
+	if (!rmem) {
+		dev_err(qproc->dev, "unable to resolve mba region\n");
+		return -EINVAL;
+	}
+
+	qproc->mba_phys = rmem->base;
+	qproc->mba_size = rmem->size;

 	if (!child) {
 		node = of_parse_phandle(qproc->dev->of_node,
@ -1910,15 +1928,20 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
 		of_node_put(child);
 	}

-	ret = of_address_to_resource(node, 0, &r);
-	of_node_put(node);
-	if (ret) {
-		dev_err(qproc->dev, "unable to resolve mpss region\n");
-		return ret;
+	if (!node) {
+		dev_err(qproc->dev, "no mpss memory-region specified\n");
+		return -EINVAL;
 	}

-	qproc->mpss_phys = qproc->mpss_reloc = r.start;
-	qproc->mpss_size = resource_size(&r);
+	rmem = of_reserved_mem_lookup(node);
+	of_node_put(node);
+	if (!rmem) {
+		dev_err(qproc->dev, "unable to resolve mpss region\n");
+		return -EINVAL;
+	}
+
+	qproc->mpss_phys = qproc->mpss_reloc = rmem->base;
+	qproc->mpss_size = rmem->size;

 	if (!child) {
 		node = of_parse_phandle(qproc->dev->of_node, "memory-region", 2);
@ -2191,6 +2214,37 @@ static const struct rproc_hexagon_res sc7280_mss = {
 	.version = MSS_SC7280,
 };

+static const struct rproc_hexagon_res sdm660_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_clk_names = (char*[]){
+			"xo",
+			"qdss",
+			"mem",
+			NULL
+	},
+	.active_clk_names = (char*[]){
+			"iface",
+			"bus",
+			"gpll0_mss",
+			"mnoc_axi",
+			"snoc_axi",
+			NULL
+	},
+	.proxy_pd_names = (char*[]){
+			"cx",
+			"mx",
+			NULL
+	},
+	.need_mem_protection = true,
+	.has_alt_reset = false,
+	.has_mba_logs = false,
+	.has_spare_reg = false,
+	.has_qaccept_regs = false,
+	.has_ext_cntl_regs = false,
+	.has_vq6 = false,
+	.version = MSS_SDM660,
+};
+
 static const struct rproc_hexagon_res sdm845_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_clk_names = (char*[]){
@ -2473,6 +2527,7 @@ static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
 	{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
 	{ .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
+	{ .compatible = "qcom,sdm660-mss-pil", .data = &sdm660_mss},
 	{ .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
 	{ },
 };
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@ -13,8 +13,9 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
@ -425,6 +426,7 @@ static const struct rproc_ops adsp_minidump_ops = {
 	.start = adsp_start,
 	.stop = adsp_stop,
 	.da_to_va = adsp_da_to_va,
+	.parse_fw = qcom_register_dump_segments,
 	.load = adsp_load,
 	.panic = adsp_panic,
 	.coredump = adsp_minidump,
@ -533,9 +535,8 @@ static void adsp_pds_detach(struct qcom_adsp *adsp, struct device **pds,

 static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
 {
+	struct reserved_mem *rmem;
 	struct device_node *node;
-	struct resource r;
-	int ret;

 	node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0);
 	if (!node) {
@ -543,17 +544,19 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
 		return -EINVAL;
 	}

-	ret = of_address_to_resource(node, 0, &r);
+	rmem = of_reserved_mem_lookup(node);
 	of_node_put(node);
-	if (ret)
-		return ret;
+	if (!rmem) {
+		dev_err(adsp->dev, "unable to resolve memory-region\n");
+		return -EINVAL;
+	}

-	adsp->mem_phys = adsp->mem_reloc = r.start;
-	adsp->mem_size = resource_size(&r);
+	adsp->mem_phys = adsp->mem_reloc = rmem->base;
+	adsp->mem_size = rmem->size;
 	adsp->mem_region = devm_ioremap_wc(adsp->dev, adsp->mem_phys, adsp->mem_size);
 	if (!adsp->mem_region) {
 		dev_err(adsp->dev, "unable to map memory region: %pa+%zx\n",
-			&r.start, adsp->mem_size);
+			&rmem->base, adsp->mem_size);
 		return -EBUSY;
 	}

@ -566,16 +569,19 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
 		return -EINVAL;
 	}

-	ret = of_address_to_resource(node, 0, &r);
-	if (ret)
-		return ret;
+	rmem = of_reserved_mem_lookup(node);
+	of_node_put(node);
+	if (!rmem) {
+		dev_err(adsp->dev, "unable to resolve dtb memory-region\n");
+		return -EINVAL;
+	}

-	adsp->dtb_mem_phys = adsp->dtb_mem_reloc = r.start;
-	adsp->dtb_mem_size = resource_size(&r);
+	adsp->dtb_mem_phys = adsp->dtb_mem_reloc = rmem->base;
+	adsp->dtb_mem_size = rmem->size;
 	adsp->dtb_mem_region = devm_ioremap_wc(adsp->dev, adsp->dtb_mem_phys, adsp->dtb_mem_size);
 	if (!adsp->dtb_mem_region) {
 		dev_err(adsp->dev, "unable to map dtb memory region: %pa+%zx\n",
-			&r.start, adsp->dtb_mem_size);
+			&rmem->base, adsp->dtb_mem_size);
 		return -EBUSY;
 	}

@ -584,29 +590,28 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)

 static int adsp_assign_memory_region(struct qcom_adsp *adsp)
 {
+	struct reserved_mem *rmem = NULL;
 	struct qcom_scm_vmperm perm;
 	struct device_node *node;
-	struct resource r;
 	int ret;

 	if (!adsp->region_assign_idx)
 		return 0;

 	node = of_parse_phandle(adsp->dev->of_node, "memory-region", adsp->region_assign_idx);
-	if (!node) {
-		dev_err(adsp->dev, "missing shareable memory-region\n");
+	if (node)
+		rmem = of_reserved_mem_lookup(node);
+	of_node_put(node);
+	if (!rmem) {
+		dev_err(adsp->dev, "unable to resolve shareable memory-region\n");
 		return -EINVAL;
 	}

-	ret = of_address_to_resource(node, 0, &r);
-	if (ret)
-		return ret;
-
 	perm.vmid = QCOM_SCM_VMID_MSS_MSA;
 	perm.perm = QCOM_SCM_PERM_RW;

-	adsp->region_assign_phys = r.start;
-	adsp->region_assign_size = resource_size(&r);
+	adsp->region_assign_phys = rmem->base;
+	adsp->region_assign_size = rmem->size;
 	adsp->region_assign_perms = BIT(QCOM_SCM_VMID_HLOS);

 	ret = qcom_scm_assign_mem(adsp->region_assign_phys,
@ -1012,7 +1017,7 @@ static const struct adsp_data sc8180x_mpss_resource = {
 	.ssctl_id = 0x12,
 };

-static const struct adsp_data slpi_resource_init = {
+static const struct adsp_data msm8996_slpi_resource_init = {
 		.crash_reason_smem = 424,
 		.firmware_name = "slpi.mdt",
 		.pas_id = 12,
@ -1026,7 +1031,7 @@ static const struct adsp_data slpi_resource_init = {
 		.ssctl_id = 0x16,
 };

-static const struct adsp_data sm8150_slpi_resource = {
+static const struct adsp_data sdm845_slpi_resource_init = {
 		.crash_reason_smem = 424,
 		.firmware_name = "slpi.mdt",
 		.pas_id = 12,
@ -1042,38 +1047,6 @@ static const struct adsp_data sm8150_slpi_resource = {
 		.ssctl_id = 0x16,
 };

-static const struct adsp_data sm8250_slpi_resource = {
-	.crash_reason_smem = 424,
-	.firmware_name = "slpi.mdt",
-	.pas_id = 12,
-	.auto_boot = true,
-	.proxy_pd_names = (char*[]){
-		"lcx",
-		"lmx",
-		NULL
-	},
-	.load_state = "slpi",
-	.ssr_name = "dsps",
-	.sysmon_name = "slpi",
-	.ssctl_id = 0x16,
-};
-
-static const struct adsp_data sm8350_slpi_resource = {
-	.crash_reason_smem = 424,
-	.firmware_name = "slpi.mdt",
-	.pas_id = 12,
-	.auto_boot = true,
-	.proxy_pd_names = (char*[]){
-		"lcx",
-		"lmx",
-		NULL
-	},
-	.load_state = "slpi",
-	.ssr_name = "dsps",
-	.sysmon_name = "slpi",
-	.ssctl_id = 0x16,
-};
-
 static const struct adsp_data wcss_resource_init = {
 	.crash_reason_smem = 421,
 	.firmware_name = "wcnss.mdt",
@ -1182,9 +1155,9 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,msm8953-adsp-pil", .data = &msm8996_adsp_resource},
 	{ .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init},
 	{ .compatible = "qcom,msm8996-adsp-pil", .data = &msm8996_adsp_resource},
-	{ .compatible = "qcom,msm8996-slpi-pil", .data = &slpi_resource_init},
+	{ .compatible = "qcom,msm8996-slpi-pil", .data = &msm8996_slpi_resource_init},
 	{ .compatible = "qcom,msm8998-adsp-pas", .data = &msm8996_adsp_resource},
-	{ .compatible = "qcom,msm8998-slpi-pas", .data = &slpi_resource_init},
+	{ .compatible = "qcom,msm8998-slpi-pas", .data = &msm8996_slpi_resource_init},
 	{ .compatible = "qcom,qcs404-adsp-pas", .data = &adsp_resource_init },
 	{ .compatible = "qcom,qcs404-cdsp-pas", .data = &cdsp_resource_init },
 	{ .compatible = "qcom,qcs404-wcss-pas", .data = &wcss_resource_init },
@ -1199,6 +1172,7 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sdm660-adsp-pas", .data = &adsp_resource_init},
 	{ .compatible = "qcom,sdm845-adsp-pas", .data = &sdm845_adsp_resource_init},
 	{ .compatible = "qcom,sdm845-cdsp-pas", .data = &sdm845_cdsp_resource_init},
+	{ .compatible = "qcom,sdm845-slpi-pas", .data = &sdm845_slpi_resource_init},
 	{ .compatible = "qcom,sdx55-mpss-pas", .data = &sdx55_mpss_resource},
 	{ .compatible = "qcom,sm6115-adsp-pas", .data = &adsp_resource_init},
 	{ .compatible = "qcom,sm6115-cdsp-pas", .data = &cdsp_resource_init},
@ -1209,17 +1183,17 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sm8150-adsp-pas", .data = &sm8150_adsp_resource},
 	{ .compatible = "qcom,sm8150-cdsp-pas", .data = &sm8150_cdsp_resource},
 	{ .compatible = "qcom,sm8150-mpss-pas", .data = &mpss_resource_init},
-	{ .compatible = "qcom,sm8150-slpi-pas", .data = &sm8150_slpi_resource},
+	{ .compatible = "qcom,sm8150-slpi-pas", .data = &sdm845_slpi_resource_init},
 	{ .compatible = "qcom,sm8250-adsp-pas", .data = &sm8250_adsp_resource},
 	{ .compatible = "qcom,sm8250-cdsp-pas", .data = &sm8250_cdsp_resource},
-	{ .compatible = "qcom,sm8250-slpi-pas", .data = &sm8250_slpi_resource},
+	{ .compatible = "qcom,sm8250-slpi-pas", .data = &sdm845_slpi_resource_init},
 	{ .compatible = "qcom,sm8350-adsp-pas", .data = &sm8350_adsp_resource},
 	{ .compatible = "qcom,sm8350-cdsp-pas", .data = &sm8350_cdsp_resource},
-	{ .compatible = "qcom,sm8350-slpi-pas", .data = &sm8350_slpi_resource},
+	{ .compatible = "qcom,sm8350-slpi-pas", .data = &sdm845_slpi_resource_init},
 	{ .compatible = "qcom,sm8350-mpss-pas", .data = &mpss_resource_init},
 	{ .compatible = "qcom,sm8450-adsp-pas", .data = &sm8350_adsp_resource},
 	{ .compatible = "qcom,sm8450-cdsp-pas", .data = &sm8350_cdsp_resource},
-	{ .compatible = "qcom,sm8450-slpi-pas", .data = &sm8350_slpi_resource},
+	{ .compatible = "qcom,sm8450-slpi-pas", .data = &sdm845_slpi_resource_init},
 	{ .compatible = "qcom,sm8450-mpss-pas", .data = &sm8450_mpss_resource},
 	{ .compatible = "qcom,sm8550-adsp-pas", .data = &sm8550_adsp_resource},
 	{ .compatible = "qcom,sm8550-cdsp-pas", .data = &sm8550_cdsp_resource},
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@ -837,8 +837,7 @@ static int q6v5_wcss_init_mmio(struct q6v5_wcss *wcss,
 		return -ENOMEM;

 	if (wcss->version == WCSS_IPQ8074) {
-		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rmb");
-		wcss->rmb_base = devm_ioremap_resource(&pdev->dev, res);
+		wcss->rmb_base = devm_platform_ioremap_resource_byname(pdev, "rmb");
 		if (IS_ERR(wcss->rmb_base))
 			return PTR_ERR(wcss->rmb_base);
 	}
--- a/drivers/remoteproc/qcom_sysmon.c
+++ b/drivers/remoteproc/qcom_sysmon.c
@ -9,7 +9,6 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/remoteproc/qcom_rproc.h>
 #include <linux/rpmsg.h>
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@ -14,8 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
@ -506,27 +506,25 @@ static int wcnss_request_irq(struct qcom_wcnss *wcnss,

 static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
 {
+	struct reserved_mem *rmem = NULL;
 	struct device_node *node;
-	struct resource r;
-	int ret;

 	node = of_parse_phandle(wcnss->dev->of_node, "memory-region", 0);
-	if (!node) {
-		dev_err(wcnss->dev, "no memory-region specified\n");
+	if (node)
+		rmem = of_reserved_mem_lookup(node);
+	of_node_put(node);
+
+	if (!rmem) {
+		dev_err(wcnss->dev, "unable to resolve memory-region\n");
 		return -EINVAL;
 	}

-	ret = of_address_to_resource(node, 0, &r);
-	of_node_put(node);
-	if (ret)
-		return ret;
-
-	wcnss->mem_phys = wcnss->mem_reloc = r.start;
-	wcnss->mem_size = resource_size(&r);
+	wcnss->mem_phys = wcnss->mem_reloc = rmem->base;
+	wcnss->mem_size = rmem->size;
 	wcnss->mem_region = devm_ioremap_wc(wcnss->dev, wcnss->mem_phys, wcnss->mem_size);
 	if (!wcnss->mem_region) {
 		dev_err(wcnss->dev, "unable to map memory region: %pa+%zx\n",
-			&r.start, wcnss->mem_size);
+			&rmem->base, wcnss->mem_size);
 		return -EBUSY;
 	}

@ -538,7 +536,6 @@ static int wcnss_probe(struct platform_device *pdev)
 	const char *fw_name = WCNSS_FIRMWARE_NAME;
 	const struct wcnss_data *data;
 	struct qcom_wcnss *wcnss;
-	struct resource *res;
 	struct rproc *rproc;
 	void __iomem *mmio;
 	int ret;
@ -576,8 +573,7 @@ static int wcnss_probe(struct platform_device *pdev)

 	mutex_init(&wcnss->iris_lock);

-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pmu");
-	mmio = devm_ioremap_resource(&pdev->dev, res);
+	mmio = devm_platform_ioremap_resource_byname(pdev, "pmu");
 	if (IS_ERR(mmio)) {
 		ret = PTR_ERR(mmio);
 		goto free_rproc;
--- a/drivers/remoteproc/qcom_wcnss_iris.c
+++ b/drivers/remoteproc/qcom_wcnss_iris.c
@ -10,6 +10,7 @@
 #include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
--- a/drivers/remoteproc/rcar_rproc.c
+++ b/drivers/remoteproc/rcar_rproc.c
@ -5,8 +5,9 @@

 #include <linux/limits.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/remoteproc.h>
 #include <linux/reset.h>
--- a/drivers/remoteproc/remoteproc_coredump.c
+++ b/drivers/remoteproc/remoteproc_coredump.c
@ -32,6 +32,7 @@ void rproc_coredump_cleanup(struct rproc *rproc)
 		kfree(entry);
 	}
 }
+EXPORT_SYMBOL_GPL(rproc_coredump_cleanup);

 /**
 * rproc_coredump_add_segment() - add segment of device memory to coredump
@ -327,6 +328,7 @@ void rproc_coredump(struct rproc *rproc)
 	 */
 	wait_for_completion(&dump_state.dump_done);
 }
+EXPORT_SYMBOL_GPL(rproc_coredump);

 /**
 * rproc_coredump_using_sections() - perform coredump using section headers
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@ -76,10 +76,6 @@ extern struct class rproc_class;
 int rproc_init_sysfs(void);
 void rproc_exit_sysfs(void);

-/* from remoteproc_coredump.c */
-void rproc_coredump_cleanup(struct rproc *rproc);
-void rproc_coredump(struct rproc *rproc);
-
 #ifdef CONFIG_REMOTEPROC_CDEV
 void rproc_init_cdev(void);
 void rproc_exit_cdev(void);
--- a/drivers/remoteproc/st_slim_rproc.c
+++ b/drivers/remoteproc/st_slim_rproc.c
@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/remoteproc.h>
 #include <linux/remoteproc/st_slim_rproc.h>
--- a/drivers/remoteproc/stm32_rproc.c
+++ b/drivers/remoteproc/stm32_rproc.c
@ -12,9 +12,9 @@
 #include <linux/mailbox_client.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/regmap.h>
 #include <linux/remoteproc.h>
@ -921,7 +921,7 @@ static void stm32_rproc_remove(struct platform_device *pdev)
 	rproc_free(rproc);
 }

-static int __maybe_unused stm32_rproc_suspend(struct device *dev)
+static int stm32_rproc_suspend(struct device *dev)
 {
 	struct rproc *rproc = dev_get_drvdata(dev);
 	struct stm32_rproc *ddata = rproc->priv;
@ -932,7 +932,7 @@ static int __maybe_unused stm32_rproc_suspend(struct device *dev)
 	return 0;
 }

-static int __maybe_unused stm32_rproc_resume(struct device *dev)
+static int stm32_rproc_resume(struct device *dev)
 {
 	struct rproc *rproc = dev_get_drvdata(dev);
 	struct stm32_rproc *ddata = rproc->priv;
@ -943,16 +943,16 @@ static int __maybe_unused stm32_rproc_resume(struct device *dev)
 	return 0;
 }

-static SIMPLE_DEV_PM_OPS(stm32_rproc_pm_ops,
-			 stm32_rproc_suspend, stm32_rproc_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(stm32_rproc_pm_ops,
+				stm32_rproc_suspend, stm32_rproc_resume);

 static struct platform_driver stm32_rproc_driver = {
 	.probe = stm32_rproc_probe,
 	.remove_new = stm32_rproc_remove,
 	.driver = {
 		.name = "stm32-rproc",
-		.pm = &stm32_rproc_pm_ops,
-		.of_match_table = of_match_ptr(stm32_rproc_match),
+		.pm = pm_ptr(&stm32_rproc_pm_ops),
+		.of_match_table = stm32_rproc_match,
 	},
 };
 module_platform_driver(stm32_rproc_driver);
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@ -9,7 +9,7 @@
 #include <linux/io.h>
 #include <linux/mailbox_client.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/of_reserved_mem.h>
 #include <linux/omap-mailbox.h>
 #include <linux/platform_device.h>
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@ -12,9 +12,10 @@
 #include <linux/kernel.h>
 #include <linux/mailbox_client.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
 #include <linux/of_reserved_mem.h>
+#include <linux/of_platform.h>
 #include <linux/omap-mailbox.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
--- a/drivers/remoteproc/wkup_m3_rproc.c
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@ -12,7 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@ -690,6 +690,10 @@ int rproc_detach(struct rproc *rproc);
 int rproc_set_firmware(struct rproc *rproc, const char *fw_name);
 void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type);
 void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem);
+
+/* from remoteproc_coredump.c */
+void rproc_coredump_cleanup(struct rproc *rproc);
+void rproc_coredump(struct rproc *rproc);
 void rproc_coredump_using_sections(struct rproc *rproc);
 int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size);
 int rproc_coredump_add_custom_segment(struct rproc *rproc,