ide: add ide_set{_max}_pio() (take 4)

* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags
  and set them in ht6560, cmd640, cmd64x and sc1200 host drivers.

* Add set_pio_mode_abuse() for checking if host driver has a non-standard
  ->tuneproc() implementation and use it in do_special().

* Add ide_set_pio() for setting PIO mode (it uses hwif->pio_mask to find
  the maximum PIO mode supported by the host), also add ide_set_max_pio()
  wrapper for ide_set_pio() to use for auto-tuning.  Convert users of
  ->tuneproc to use ide_set{_max}_pio() where possible.  This leaves only
  do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as
  a direct users of ->tuneproc.

* Remove no longer needed ide_get_best_pio_mode() calls and printk-s
  reporting PIO mode selected from ->tuneproc implementations.

* Rename ->tuneproc hook to ->set_pio_mode and make 'pio' argument const.

* Remove stale comment from ide_config_drive_speed().

v2:
* Fix "ata_" prefix (Noticed by Jeff).

v3:
* Minor cleanups/fixups per Sergei's suggestions.

v4:
* Fix compile problem in drivers/ide/pci/cmd640.c
  (Noticed by Andrew Morton).

* Improve some ->set_pio_mode comments.

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2007-10-11 23:54:00 +02:00
parent 842c19ad6f
commit 26bcb879c0
45 changed files with 318 additions and 326 deletions

View File

@ -680,12 +680,10 @@ static void cris_dma_off(ide_drive_t *drive)
{
}
static void tune_cris_ide(ide_drive_t *drive, u8 pio)
static void cris_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int setup, strobe, hold;
pio = ide_get_best_pio_mode(drive, pio, 4);
switch(pio)
{
case 0:
@ -727,7 +725,7 @@ static int speed_cris_ide(ide_drive_t *drive, const u8 speed)
int cyc = 0, dvs = 0, strobe = 0, hold = 0;
if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
tune_cris_ide(drive, speed - XFER_PIO_0);
cris_set_pio_mode(drive, speed - XFER_PIO_0);
return ide_config_drive_speed(drive, speed);
}
@ -797,7 +795,7 @@ init_e100_ide (void)
ide_register_hw(&hw, 1, &hwif);
hwif->mmio = 1;
hwif->chipset = ide_etrax100;
hwif->tuneproc = &tune_cris_ide;
hwif->set_pio_mode = &cris_set_pio_mode;
hwif->speedproc = &speed_cris_ide;
hwif->ata_input_data = &cris_ide_input_data;
hwif->ata_output_data = &cris_ide_output_data;

View File

@ -201,8 +201,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
return do_rw_taskfile(drive, args);
case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */
if (drive->hwif->tuneproc != NULL)
drive->hwif->tuneproc(drive, 255);
ide_set_max_pio(drive);
/*
* skip idedisk_pm_idle for ATAPI devices
*/
@ -788,6 +787,30 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive)
return ide_started;
}
/*
* handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
*/
static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
{
switch (req_pio) {
case 202:
case 201:
case 200:
case 102:
case 101:
case 100:
return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
case 9:
case 8:
return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
case 7:
case 6:
return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
default:
return 0;
}
}
/**
* do_special - issue some special commands
* @drive: drive the command is for
@ -805,9 +828,17 @@ static ide_startstop_t do_special (ide_drive_t *drive)
printk("%s: do_special: 0x%02x\n", drive->name, s->all);
#endif
if (s->b.set_tune) {
ide_hwif_t *hwif = drive->hwif;
u8 req_pio = drive->tune_req;
s->b.set_tune = 0;
if (HWIF(drive)->tuneproc != NULL)
HWIF(drive)->tuneproc(drive, drive->tune_req);
if (set_pio_mode_abuse(drive->hwif, req_pio)) {
if (hwif->set_pio_mode)
hwif->set_pio_mode(drive, req_pio);
} else
ide_set_pio(drive, req_pio);
return ide_stopped;
} else {
if (drive->media == ide_disk)

View File

@ -780,12 +780,6 @@ int ide_driveid_update (ide_drive_t *drive)
/*
* Similar to ide_wait_stat(), except it never calls ide_error internally.
* This is a kludge to handle the new ide_config_drive_speed() function,
* and should not otherwise be used anywhere. Eventually, the tuneproc's
* should be updated to return ide_startstop_t, in which case we can get
* rid of this abomination again. :) -ml
*
* It is gone..........
*
* const char *msg == consider adding for verbose errors.
*/

View File

@ -325,6 +325,35 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
/* req_pio == "255" for auto-tune */
void ide_set_pio(ide_drive_t *drive, u8 req_pio)
{
ide_hwif_t *hwif = drive->hwif;
u8 host_pio, pio;
if (hwif->set_pio_mode == NULL)
return;
BUG_ON(hwif->pio_mask == 0x00);
host_pio = fls(hwif->pio_mask) - 1;
pio = ide_get_best_pio_mode(drive, req_pio, host_pio);
/*
* TODO:
* - report device max PIO mode
* - check req_pio != 255 against device max PIO mode
*/
printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n",
drive->name, host_pio, req_pio,
req_pio == 255 ? "(auto-tune)" : "", pio);
hwif->set_pio_mode(drive, pio);
}
EXPORT_SYMBOL_GPL(ide_set_pio);
/**
* ide_toggle_bounce - handle bounce buffering
* @drive: drive to update

View File

@ -827,10 +827,8 @@ static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
ide_drive_t *drive = &hwif->drives[unit];
if (drive->present) {
if (hwif->tuneproc != NULL &&
drive->autotune == IDE_TUNE_AUTO)
/* auto-tune PIO mode */
hwif->tuneproc(drive, 255);
if (drive->autotune == IDE_TUNE_AUTO)
ide_set_max_pio(drive);
if (drive->autotune != IDE_TUNE_DEFAULT &&
drive->autotune != IDE_TUNE_AUTO)

View File

@ -396,7 +396,7 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->cds = tmp_hwif->cds;
#endif
hwif->tuneproc = tmp_hwif->tuneproc;
hwif->set_pio_mode = tmp_hwif->set_pio_mode;
hwif->speedproc = tmp_hwif->speedproc;
hwif->mdma_filter = tmp_hwif->mdma_filter;
hwif->udma_filter = tmp_hwif->udma_filter;
@ -867,8 +867,9 @@ int set_pio_mode(ide_drive_t *drive, int arg)
if (arg < 0 || arg > 255)
return -EINVAL;
if (!HWIF(drive)->tuneproc)
if (drive->hwif->set_pio_mode == NULL)
return -ENOSYS;
if (drive->special.b.set_tune)
return -EBUSY;
ide_init_drive_cmd(&rq);

View File

@ -68,8 +68,6 @@ static RegInitializer initData[] __initdata = {
{0x35, 0x03}, {0x00, 0x00}
};
#define ALI_MAX_PIO 4
/* timing parameter registers for each drive */
static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
{0x03, 0x26, 0x04, 0x27}, /* drive 0 */
@ -109,7 +107,7 @@ static void outReg (u8 data, u8 reg)
* This function computes timing parameters
* and sets controller registers accordingly.
*/
static void ali14xx_tune_drive (ide_drive_t *drive, u8 pio)
static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int driveNum;
int time1, time2;
@ -117,8 +115,6 @@ static void ali14xx_tune_drive (ide_drive_t *drive, u8 pio)
unsigned long flags;
int bus_speed = system_bus_clock();
pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO);
/* calculate timing, according to PIO mode */
time1 = ide_pio_cycle_time(drive, pio);
time2 = ide_pio_timings[pio].active_time;
@ -212,12 +208,12 @@ static int __init ali14xx_probe(void)
hwif->chipset = ide_ali14xx;
hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = &ali14xx_tune_drive;
hwif->set_pio_mode = &ali14xx_set_pio_mode;
hwif->mate = mate;
mate->chipset = ide_ali14xx;
mate->pio_mask = ATA_PIO4;
mate->tuneproc = &ali14xx_tune_drive;
mate->set_pio_mode = &ali14xx_set_pio_mode;
mate->mate = hwif;
mate->channel = 1;

View File

@ -67,12 +67,10 @@ static void sub22 (char b, char c)
}
}
static void tune_dtc2278 (ide_drive_t *drive, u8 pio)
static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
unsigned long flags;
pio = ide_get_best_pio_mode(drive, pio, 4);
if (pio >= 3) {
spin_lock_irqsave(&ide_lock, flags);
/*
@ -124,7 +122,7 @@ static int __init dtc2278_probe(void)
hwif->serialized = 1;
hwif->chipset = ide_dtc2278;
hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = &tune_dtc2278;
hwif->set_pio_mode = &dtc2278_set_pio_mode;
hwif->drives[0].no_unmask = 1;
hwif->drives[1].no_unmask = 1;
hwif->mate = mate;

View File

@ -199,7 +199,7 @@ static int __init try_to_init_ht6560b(void)
return 1;
}
static u8 ht_pio2timings(ide_drive_t *drive, u8 pio)
static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio)
{
int active_time, recovery_time;
int active_cycles, recovery_cycles;
@ -208,7 +208,6 @@ static u8 ht_pio2timings(ide_drive_t *drive, u8 pio)
if (pio) {
unsigned int cycle_time;
pio = ide_get_best_pio_mode(drive, pio, 5);
cycle_time = ide_pio_cycle_time(drive, pio);
/*
@ -277,7 +276,7 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state)
#endif
}
static void tune_ht6560b (ide_drive_t *drive, u8 pio)
static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
unsigned long flags;
u8 timing;
@ -333,15 +332,17 @@ int __init ht6560b_init(void)
hwif->chipset = ide_ht6560b;
hwif->selectproc = &ht6560b_selectproc;
hwif->host_flags = IDE_HFLAG_ABUSE_PREFETCH;
hwif->pio_mask = ATA_PIO5;
hwif->tuneproc = &tune_ht6560b;
hwif->set_pio_mode = &ht6560b_set_pio_mode;
hwif->serialized = 1; /* is this needed? */
hwif->mate = mate;
mate->chipset = ide_ht6560b;
mate->selectproc = &ht6560b_selectproc;
mate->host_flags = IDE_HFLAG_ABUSE_PREFETCH;
mate->pio_mask = ATA_PIO5;
mate->tuneproc = &tune_ht6560b;
mate->set_pio_mode = &ht6560b_set_pio_mode;
mate->serialized = 1; /* is this needed? */
mate->mate = hwif;
mate->channel = 1;

View File

@ -224,15 +224,14 @@ static void qd_set_timing (ide_drive_t *drive, u8 timing)
printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
}
/*
* qd6500_tune_drive
*/
static void qd6500_tune_drive (ide_drive_t *drive, u8 pio)
static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int active_time = 175;
int recovery_time = 415; /* worst case values from the dos driver */
/*
* FIXME: use "pio" value
*/
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)
&& drive->id->tPIO && (drive->id->field_valid & 0x02)
&& drive->id->eide_pio >= 240) {
@ -246,11 +245,7 @@ static void qd6500_tune_drive (ide_drive_t *drive, u8 pio)
qd_set_timing(drive, qd6500_compute_timing(HWIF(drive), active_time, recovery_time));
}
/*
* qd6580_tune_drive
*/
static void qd6580_tune_drive (ide_drive_t *drive, u8 pio)
static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int base = HWIF(drive)->select_data;
unsigned int cycle_time;
@ -258,7 +253,6 @@ static void qd6580_tune_drive (ide_drive_t *drive, u8 pio)
int recovery_time = 415; /* worst case values from the dos driver */
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ide_pio_cycle_time(drive, pio);
switch (pio) {
@ -335,8 +329,7 @@ static int __init qd_testreg(int port)
*/
static void __init qd_setup(ide_hwif_t *hwif, int base, int config,
unsigned int data0, unsigned int data1,
void (*tuneproc) (ide_drive_t *, u8 pio))
unsigned int data0, unsigned int data1)
{
hwif->chipset = ide_qd65xx;
hwif->channel = hwif->index;
@ -347,8 +340,6 @@ static void __init qd_setup(ide_hwif_t *hwif, int base, int config,
hwif->drives[0].io_32bit =
hwif->drives[1].io_32bit = 1;
hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = tuneproc;
probe_hwif_init(hwif);
}
/*
@ -361,7 +352,7 @@ static void __exit qd_unsetup(ide_hwif_t *hwif)
{
u8 config = hwif->config_data;
int base = hwif->select_data;
void *tuneproc = (void *) hwif->tuneproc;
void *set_pio_mode = (void *)hwif->set_pio_mode;
if (hwif->chipset != ide_qd65xx)
return;
@ -369,12 +360,12 @@ static void __exit qd_unsetup(ide_hwif_t *hwif)
printk(KERN_NOTICE "%s: back to defaults\n", hwif->name);
hwif->selectproc = NULL;
hwif->tuneproc = NULL;
hwif->set_pio_mode = NULL;
if (tuneproc == (void *) qd6500_tune_drive) {
if (set_pio_mode == (void *)qd6500_set_pio_mode) {
// will do it for both
qd_write_reg(QD6500_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
} else if (tuneproc == (void *) qd6580_tune_drive) {
} else if (set_pio_mode == (void *)qd6580_set_pio_mode) {
if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) {
qd_write_reg(QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
qd_write_reg(QD6580_DEF_DATA2, QD_TIMREG(&hwif->drives[1]));
@ -424,8 +415,11 @@ static int __init qd_probe(int base)
return 1;
}
qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA,
&qd6500_tune_drive);
qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA);
hwif->set_pio_mode = &qd6500_set_pio_mode;
probe_hwif_init(hwif);
ide_proc_register_port(hwif);
@ -455,8 +449,12 @@ static int __init qd_probe(int base)
printk(KERN_INFO "%s: qd6580: single IDE board\n",
hwif->name);
qd_setup(hwif, base, config | (control << 8),
QD6580_DEF_DATA, QD6580_DEF_DATA2,
&qd6580_tune_drive);
QD6580_DEF_DATA, QD6580_DEF_DATA2);
hwif->set_pio_mode = &qd6580_set_pio_mode;
probe_hwif_init(hwif);
qd_write_reg(QD_DEF_CONTR,QD_CONTROL_PORT);
ide_proc_register_port(hwif);
@ -472,11 +470,19 @@ static int __init qd_probe(int base)
hwif->name, mate->name);
qd_setup(hwif, base, config | (control << 8),
QD6580_DEF_DATA, QD6580_DEF_DATA,
&qd6580_tune_drive);
QD6580_DEF_DATA, QD6580_DEF_DATA);
hwif->set_pio_mode = &qd6580_set_pio_mode;
probe_hwif_init(hwif);
qd_setup(mate, base, config | (control << 8),
QD6580_DEF_DATA2, QD6580_DEF_DATA2,
&qd6580_tune_drive);
QD6580_DEF_DATA2, QD6580_DEF_DATA2);
mate->set_pio_mode = &qd6580_set_pio_mode;
probe_hwif_init(mate);
qd_write_reg(QD_DEF_CONTR,QD_CONTROL_PORT);
ide_proc_register_port(hwif);

View File

@ -105,12 +105,11 @@ static void umc_set_speeds (u8 speeds[])
speeds[0], speeds[1], speeds[2], speeds[3]);
}
static void tune_umc (ide_drive_t *drive, u8 pio)
static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
unsigned long flags;
ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup;
pio = ide_get_best_pio_mode(drive, pio, 4);
printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
drive->name, pio, pio_to_umc[pio]);
spin_lock_irqsave(&ide_lock, flags);
@ -150,12 +149,12 @@ static int __init umc8672_probe(void)
hwif->chipset = ide_umc8672;
hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = &tune_umc;
hwif->set_pio_mode = &umc_set_pio_mode;
hwif->mate = mate;
mate->chipset = ide_umc8672;
mate->pio_mask = ATA_PIO4;
mate->tuneproc = &tune_umc;
mate->set_pio_mode = &umc_set_pio_mode;
mate->mate = hwif;
mate->channel = 1;

View File

@ -99,18 +99,12 @@ void auide_outsw(unsigned long port, void *addr, u32 count)
#endif
static void auide_tune_drive(ide_drive_t *drive, byte pio)
static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int mem_sttime;
int mem_stcfg;
u8 speed;
/* get the best pio mode for the drive */
pio = ide_get_best_pio_mode(drive, pio, 4);
printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n",
drive->name, pio);
mem_sttime = 0;
mem_stcfg = au_readl(MEM_STCFG2);
@ -184,7 +178,7 @@ static int auide_tune_chipset(ide_drive_t *drive, const u8 speed)
mem_stcfg = au_readl(MEM_STCFG2);
if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
auide_tune_drive(drive, speed - XFER_PIO_0);
au1xxx_set_pio_mode(drive, speed - XFER_PIO_0);
return 0;
}
@ -712,7 +706,7 @@ static int au_ide_probe(struct device *dev)
hwif->OUTSW = auide_outsw;
#endif
hwif->tuneproc = &auide_tune_drive;
hwif->set_pio_mode = &au1xxx_set_pio_mode;
hwif->speedproc = &auide_tune_chipset;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA

View File

@ -138,9 +138,8 @@ static int aec6260_tune_chipset(ide_drive_t *drive, const u8 speed)
return(ide_config_drive_speed(drive, speed));
}
static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
(void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0);
}
@ -150,7 +149,7 @@ static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
aec62xx_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -201,7 +200,7 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
u8 reg54 = 0, mask = hwif->channel ? 0xf0 : 0x0f;
unsigned long flags;
hwif->tuneproc = &aec62xx_tune_drive;
hwif->set_pio_mode = &aec_set_pio_mode;
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
if(hwif->mate)

View File

@ -283,17 +283,14 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */
/**
* ali15x3_tune_pio - set up chipset for PIO mode
* @drive: drive to tune
* @pio: desired mode
* ali_tune_pio - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Select the best PIO mode for the drive in question.
* Then program the controller for this mode.
*
* Returns the PIO mode programmed.
* Program the controller for the given PIO mode.
*/
static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
static void ali_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -306,7 +303,6 @@ static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
u8 cd_dma_fifo = 0;
int unit = drive->select.b.unit & 1;
pio = ide_get_best_pio_mode(drive, pio, 5);
s_time = ide_pio_timings[pio].setup_time;
a_time = ide_pio_timings[pio].active_time;
if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
@ -359,22 +355,20 @@ static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
* { 25, 70, 25 }, PIO Mode 4 with IORDY ns
* { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard)
*/
return pio;
}
/**
* ali15x3_tune_drive - set up drive for PIO mode
* ali_set_pio_mode - set up drive for PIO mode
* @drive: drive to tune
* @pio: desired mode
*
* Program the controller with the best PIO timing for the given drive.
* Program the controller with the desired PIO timing for the given drive.
* Then set up the drive itself.
*/
static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ali15x3_tune_pio(drive, pio);
ali_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -437,7 +431,7 @@ static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed)
pci_write_config_byte(dev, m5229_udma, tmpbyte);
if (speed < XFER_SW_DMA_0)
(void) ali15x3_tune_pio(drive, speed - XFER_PIO_0);
ali_tune_pio(drive, speed - XFER_PIO_0);
} else {
pci_read_config_byte(dev, m5229_udma, &tmpbyte);
tmpbyte &= (0x0f << ((1-unit) << 2));
@ -470,7 +464,7 @@ static int ali15x3_config_drive_for_dma(ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
ali15x3_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -700,7 +694,7 @@ static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
{
hwif->autodma = 0;
hwif->tuneproc = &ali15x3_tune_drive;
hwif->set_pio_mode = &ali_set_pio_mode;
hwif->speedproc = &ali15x3_tune_chipset;
hwif->udma_filter = &ali_udma_filter;

View File

@ -266,16 +266,12 @@ static int amd_set_drive(ide_drive_t *drive, const u8 speed)
}
/*
* amd74xx_tune_drive() is a callback from upper layers for
* PIO-only tuning.
* amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
*/
static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio)
static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
if (pio == 255)
pio = ide_get_best_pio_mode(drive, 255, 5);
amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
amd_set_drive(drive, XFER_PIO_0 + pio);
}
static int amd74xx_ide_dma_check(ide_drive_t *drive)
@ -283,7 +279,7 @@ static int amd74xx_ide_dma_check(ide_drive_t *drive)
u8 speed = ide_max_dma_mode(drive);
if (speed == 0) {
amd74xx_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -409,7 +405,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->tuneproc = &amd74xx_tune_drive;
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->speedproc = &amd_set_drive;
for (i = 0; i < 2; i++) {

View File

@ -153,9 +153,8 @@ static void atiixp_tune_pio(ide_drive_t *drive, u8 pio)
spin_unlock_irqrestore(&atiixp_lock, flags);
}
static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
atiixp_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -231,7 +230,7 @@ static int atiixp_dma_check(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
atiixp_tuneproc(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -254,7 +253,7 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
hwif->irq = ch ? 15 : 14;
hwif->autodma = 0;
hwif->tuneproc = &atiixp_tuneproc;
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->speedproc = &atiixp_speedproc;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;

View File

@ -628,45 +628,40 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle
program_drive_counts (index);
}
/*
* Drive PIO mode selection:
*/
static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
unsigned int index = 0, cycle_time;
u8 b;
while (drive != cmd_drives[index]) {
if (++index > 3) {
printk("%s: bad news in cmd640_tune_drive\n", drive->name);
printk(KERN_ERR "%s: bad news in %s\n",
drive->name, __FUNCTION__);
return;
}
}
switch (mode_wanted) {
switch (pio) {
case 6: /* set fast-devsel off */
case 7: /* set fast-devsel on */
mode_wanted &= 1;
b = get_cmd640_reg(CNTRL) & ~0x27;
if (mode_wanted)
if (pio & 1)
b |= 0x27;
put_cmd640_reg(CNTRL, b);
printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis");
printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, (pio & 1) ? "en" : "dis");
return;
case 8: /* set prefetch off */
case 9: /* set prefetch on */
mode_wanted &= 1;
set_prefetch_mode(index, mode_wanted);
printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis");
set_prefetch_mode(index, pio & 1);
printk("%s: %sabled cmd640 prefetch\n", drive->name, (pio & 1) ? "en" : "dis");
return;
}
mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5);
cycle_time = ide_pio_cycle_time(drive, mode_wanted);
cmd640_set_mode(index, mode_wanted, cycle_time);
cycle_time = ide_pio_cycle_time(drive, pio);
cmd640_set_mode(index, pio, cycle_time);
printk("%s: selected cmd640 PIO mode%d (%dns)",
drive->name, mode_wanted, cycle_time);
drive->name, pio, cycle_time);
display_clocks(index);
}
@ -766,8 +761,10 @@ int __init ide_probe_for_cmd640x (void)
cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
cmd_hwif0->chipset = ide_cmd640;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
IDE_HFLAG_ABUSE_FAST_DEVSEL;
cmd_hwif0->pio_mask = ATA_PIO5;
cmd_hwif0->tuneproc = &cmd640_tune_drive;
cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
/*
@ -822,8 +819,10 @@ int __init ide_probe_for_cmd640x (void)
cmd_hwif1->mate = cmd_hwif0;
cmd_hwif1->channel = 1;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
IDE_HFLAG_ABUSE_FAST_DEVSEL;
cmd_hwif1->pio_mask = ATA_PIO5;
cmd_hwif1->tuneproc = &cmd640_tune_drive;
cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
}
printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,

View File

@ -214,28 +214,25 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
}
/*
* This routine selects drive's best PIO mode and writes into the chipset
* registers setup/active/recovery timings.
* This routine writes into the chipset registers
* PIO setup/active/recovery timings.
*/
static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
unsigned int cycle_time;
u8 pio_mode, setup_count, arttim = 0;
u8 setup_count, arttim = 0;
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5);
cycle_time = ide_pio_cycle_time(drive, pio_mode);
cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
drive->name, mode_wanted, pio_mode, cycle_time);
cycle_time = ide_pio_cycle_time(drive, pio);
program_cycle_times(drive, cycle_time,
ide_pio_timings[pio_mode].active_time);
ide_pio_timings[pio].active_time);
setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time,
setup_count = quantize_timing(ide_pio_timings[pio].setup_time,
1000 / system_bus_clock());
/*
@ -266,16 +263,14 @@ static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
arttim |= setup_values[setup_count];
(void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
return pio_mode;
}
/*
* Attempts to set drive's PIO mode.
* Special cases are 8: prefetch off, 9: prefetch on (both never worked),
* and 255: auto-select best mode (used at boot time).
* Special cases are 8: prefetch off, 9: prefetch on (both never worked)
*/
static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
/*
* Filter out the prefetch control values
@ -284,7 +279,7 @@ static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
if (pio == 8 || pio == 9)
return;
pio = cmd64x_tune_pio(drive, pio);
cmd64x_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -334,7 +329,7 @@ static int cmd64x_tune_chipset(ide_drive_t *drive, const u8 speed)
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
(void) cmd64x_tune_pio(drive, speed - XFER_PIO_0);
cmd64x_tune_pio(drive, speed - XFER_PIO_0);
break;
default:
return 1;
@ -352,7 +347,7 @@ static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
cmd64x_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -536,7 +531,7 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
hwif->tuneproc = &cmd64x_tune_drive;
hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->speedproc = &cmd64x_tune_chipset;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
@ -620,6 +615,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
.host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x00, /* no udma */
},{ /* 1 */
@ -630,6 +626,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
.host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x07, /* udma0-2 */
},{ /* 2 */
@ -640,6 +637,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
.host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 3 */
@ -650,6 +648,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
.host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x3f, /* udma0-5 */
}

View File

@ -122,17 +122,16 @@ static int cs5520_tune_chipset(ide_drive_t *drive, const u8 speed)
return error;
}
static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
cs5520_tune_chipset(drive, XFER_PIO_0 + pio);
}
static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
{
/* Tune the drive for PIO modes up to PIO 4 */
cs5520_tune_drive(drive, 255);
ide_set_max_pio(drive);
/* Then tell the core to use DMA operations */
return 0;
@ -164,7 +163,7 @@ static int cs5520_dma_on(ide_drive_t *drive)
static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
{
hwif->tuneproc = &cs5520_tune_drive;
hwif->set_pio_mode = &cs5520_set_pio_mode;
hwif->speedproc = &cs5520_tune_chipset;
hwif->ide_dma_check = &cs5520_config_drive_xfer_rate;
hwif->ide_dma_on = &cs5520_dma_on;

View File

@ -71,19 +71,18 @@ static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
}
/**
* cs5530_tuneproc - select/set PIO modes
* cs5530_set_pio_mode - set PIO mode
* @drive: drive
* @pio: PIO mode number
*
* cs5530_tuneproc() handles selection/setting of PIO modes
* for both the chipset and drive.
* Handles setting of PIO mode for both the chipset and drive.
*
* The ide_init_cs5530() routine guarantees that all drives
* The init_hwif_cs5530() routine guarantees that all drives
* will have valid default PIO timings set up before we get here.
*/
static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
cs5530_tunepio(drive, pio);
}
@ -306,7 +305,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
if (hwif->mate)
hwif->serialized = hwif->mate->serialized = 1;
hwif->tuneproc = &cs5530_tuneproc;
hwif->set_pio_mode = &cs5530_set_pio_mode;
hwif->speedproc = &cs5530_tune_chipset;
basereg = CS5530_BASEREG(hwif);

View File

@ -147,16 +147,16 @@ static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
return 0;
}
/****
* cs5535_tuneproc - PIO setup
* @drive: drive to set up
* @pio: mode to use (255 for 'best possible')
/**
* cs5535_set_pio_mode - PIO setup
* @drive: drive
* @pio: PIO mode number
*
* A callback from the upper layers for PIO-only tuning.
*/
static void cs5535_tuneproc(ide_drive_t *drive, u8 pio)
static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
cs5535_set_speed(drive, XFER_PIO_0 + pio);
}
@ -169,7 +169,7 @@ static int cs5535_dma_check(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
cs5535_tuneproc(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -198,7 +198,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->tuneproc = &cs5535_tuneproc;
hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->speedproc = &cs5535_set_drive;
hwif->ide_dma_check = &cs5535_dma_check;

View File

@ -97,9 +97,6 @@
#define CY82_INDEX_CHANNEL1 0x31
#define CY82_INDEX_TIMEOUT 0x32
/* the max PIO mode - from datasheet */
#define CY82C693_MAX_PIO 4
/* the min and max PCI bus speed in MHz - from datasheet */
#define CY82C963_MIN_BUS_SPEED 25
#define CY82C963_MAX_BUS_SPEED 33
@ -148,9 +145,6 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk)
* so you can play with the idebus=xx parameter
*/
if (pio > CY82C693_MAX_PIO)
pio = CY82C693_MAX_PIO;
/* let's calc the address setup time clocks */
p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed);
@ -269,10 +263,7 @@ static int cy82c693_ide_dma_on (ide_drive_t *drive)
return __ide_dma_on(drive);
}
/*
* tune ide drive - set PIO mode
*/
static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -329,13 +320,6 @@ static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
#endif /* CY82C693_DEBUG_LOGS */
/* first let's calc the pio modes */
pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO);
#if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
#endif /* CY82C693_DEBUG_INFO */
/* let's calc the values for this PIO mode */
compute_clocks(pio, &pclk);
@ -447,7 +431,7 @@ static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->chipset = ide_cy82c693;
hwif->tuneproc = &cy82c693_tune_drive;
hwif->set_pio_mode = &cy82c693_set_pio_mode;
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1;

View File

@ -77,9 +77,8 @@ static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed)
return(ide_config_drive_speed(drive, speed));
}
static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 5);
(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
}
@ -91,7 +90,7 @@ static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive)
return -1;
if (ide_use_fast_pio(drive))
hpt34x_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -145,7 +144,7 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->tuneproc = &hpt34x_tune_drive;
hwif->set_pio_mode = &hpt34x_set_pio_mode;
hwif->speedproc = &hpt34x_tune_chipset;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;

View File

@ -662,9 +662,8 @@ static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed)
return hpt36x_tune_chipset(drive, speed);
}
static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
}
@ -726,7 +725,7 @@ static int hpt366_config_drive_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
hpt3xx_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -1257,7 +1256,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
/* Cache the channel's MISC. control registers' offset */
hwif->select_data = hwif->channel ? 0x54 : 0x50;
hwif->tuneproc = &hpt3xx_tune_drive;
hwif->set_pio_mode = &hpt3xx_set_pio_mode;
hwif->speedproc = &hpt3xx_tune_chipset;
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->intrproc = &hpt3xx_intrproc;

View File

@ -105,9 +105,8 @@ static void it8213_tune_pio(ide_drive_t *drive, const u8 pio)
spin_unlock_irqrestore(&tune_lock, flags);
}
static void it8213_tuneproc(ide_drive_t *drive, u8 pio)
static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
it8213_tune_pio(drive, pio);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -212,7 +211,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
it8213_tuneproc(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -231,7 +230,7 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
u8 reg42h = 0;
hwif->speedproc = &it8213_tune_chipset;
hwif->tuneproc = &it8213_tuneproc;
hwif->set_pio_mode = &it8213_set_pio_mode;
hwif->autodma = 0;

View File

@ -274,9 +274,8 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio)
return ide_config_drive_speed(drive, XFER_PIO_0 + set_pio);
}
static void it821x_tuneproc(ide_drive_t *drive, u8 pio)
static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
(void)it821x_tunepio(drive, pio);
}
@ -473,7 +472,7 @@ static int it821x_config_drive_for_dma (ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
it821x_tuneproc(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -640,7 +639,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
}
hwif->speedproc = &it821x_tune_chipset;
hwif->tuneproc = &it821x_tuneproc;
hwif->set_pio_mode = &it821x_set_pio_mode;
/* MWDMA/PIO clock switching for pass through mode */
if(!idev->smart) {

View File

@ -83,9 +83,8 @@ static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
return ATA_CBL_PATA80;
}
static void jmicron_tuneproc(ide_drive_t *drive, u8 pio)
static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 5);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -116,7 +115,7 @@ static int jmicron_config_drive_for_dma (ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
jmicron_tuneproc(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -131,7 +130,7 @@ static int jmicron_config_drive_for_dma (ide_drive_t *drive)
static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
{
hwif->speedproc = &jmicron_tune_chipset;
hwif->tuneproc = &jmicron_tuneproc;
hwif->set_pio_mode = &jmicron_set_pio_mode;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;

View File

@ -47,7 +47,7 @@
* The main problem with OPTi is that some timings for master
* and slave must be the same. For example, if you have master
* PIO 3 and slave PIO 0, driver have to set some timings of
* master for PIO 0. Second problem is that opti621_tune_drive
* master for PIO 0. Second problem is that opti621_set_pio_mode
* got only one drive to set, but have to set both drives.
* This is solved in compute_pios. If you don't set
* the second drive, compute_pios use ide_get_best_pio_mode
@ -103,7 +103,7 @@
#include <asm/io.h>
#define OPTI621_MAX_PIO 3
//#define OPTI621_MAX_PIO 3
/* In fact, I do not have any PIO 4 drive
* (address: 25 ns, data: 70 ns, recovery: 35 ns),
* but OPTi 82C621 is programmable and it can do (minimal values):
@ -136,8 +136,8 @@ static int reg_base;
#define PIO_NOT_EXIST 254
#define PIO_DONT_KNOW 255
/* there are stored pio numbers from other calls of opti621_tune_drive */
static void compute_pios(ide_drive_t *drive, u8 pio)
/* there are stored pio numbers from other calls of opti621_set_pio_mode */
static void compute_pios(ide_drive_t *drive, const u8 pio)
/* Store values into drive->drive_data
* second_contr - 0 for primary controller, 1 for secondary
* slave_drive - 0 -> pio is for master, 1 -> pio is for slave
@ -147,12 +147,13 @@ static void compute_pios(ide_drive_t *drive, u8 pio)
int d;
ide_hwif_t *hwif = HWIF(drive);
drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO);
drive->drive_data = pio;
for (d = 0; d < 2; ++d) {
drive = &hwif->drives[d];
if (drive->present) {
if (drive->drive_data == PIO_DONT_KNOW)
drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO);
drive->drive_data = ide_get_best_pio_mode(drive, 255, 3);
#ifdef OPTI621_DEBUG
printk("%s: Selected PIO mode %d\n",
drive->name, drive->drive_data);
@ -240,8 +241,7 @@ static void compute_clocks(int pio, pio_clocks_t *clks)
}
/* Main tune procedure, called from tuneproc. */
static void opti621_tune_drive (ide_drive_t *drive, u8 pio)
static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
/* primary and secondary drives share some registers,
* so we have to program both drives
@ -331,7 +331,8 @@ static void __devinit init_hwif_opti621 (ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->drives[0].drive_data = PIO_DONT_KNOW;
hwif->drives[1].drive_data = PIO_DONT_KNOW;
hwif->tuneproc = &opti621_tune_drive;
hwif->set_pio_mode = &opti621_set_pio_mode;
if (!(hwif->dma_base))
return;

View File

@ -215,9 +215,8 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, const u8 speed)
return err;
}
static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
(void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
@ -237,7 +236,7 @@ static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
pdcnew_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -490,7 +489,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
{
hwif->autodma = 0;
hwif->tuneproc = &pdcnew_tune_drive;
hwif->set_pio_mode = &pdcnew_set_pio_mode;
hwif->quirkproc = &pdcnew_quirkproc;
hwif->speedproc = &pdcnew_tune_chipset;
hwif->resetproc = &pdcnew_reset;

View File

@ -142,9 +142,8 @@ static int pdc202xx_tune_chipset(ide_drive_t *drive, const u8 speed)
return ide_config_drive_speed(drive, speed);
}
static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
}
@ -190,7 +189,7 @@ static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
pdc202xx_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -306,10 +305,11 @@ static void pdc202xx_reset (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
ide_hwif_t *mate = hwif->mate;
pdc202xx_reset_host(hwif);
pdc202xx_reset_host(mate);
pdc202xx_tune_drive(drive, 255);
ide_set_max_pio(drive);
}
static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
@ -328,7 +328,9 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->rqsize = 256;
hwif->autodma = 0;
hwif->tuneproc = &pdc202xx_tune_drive;
hwif->set_pio_mode = &pdc202xx_set_pio_mode;
hwif->quirkproc = &pdc202xx_quirkproc;
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)

View File

@ -17,11 +17,11 @@
* 41
* 43
*
* | PIO 0 | c0 | 80 | 0 | piix_tune_drive(drive, 0);
* | PIO 2 | SW2 | d0 | 90 | 4 | piix_tune_drive(drive, 2);
* | PIO 3 | MW1 | e1 | a1 | 9 | piix_tune_drive(drive, 3);
* | PIO 4 | MW2 | e3 | a3 | b | piix_tune_drive(drive, 4);
*
* | PIO 0 | c0 | 80 | 0 |
* | PIO 2 | SW2 | d0 | 90 | 4 |
* | PIO 3 | MW1 | e1 | a1 | 9 |
* | PIO 4 | MW2 | e3 | a3 | b |
*
* sitre = word40 & 0x4000; primary
* sitre = word42 & 0x4000; secondary
*
@ -204,16 +204,16 @@ static void piix_tune_pio (ide_drive_t *drive, u8 pio)
}
/**
* piix_tune_drive - tune a drive attached to PIIX
* piix_set_pio_mode - set PIO mode
* @drive: drive to tune
* @pio: desired PIO mode
*
* Set the drive's PIO mode (might be useful if drive is not registered
* in CMOS for any reason).
*/
static void piix_tune_drive (ide_drive_t *drive, u8 pio)
static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
piix_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -317,7 +317,7 @@ static int piix_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
piix_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -454,7 +454,8 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
}
hwif->autodma = 0;
hwif->tuneproc = &piix_tune_drive;
hwif->set_pio_mode = &piix_set_pio_mode;
hwif->speedproc = &piix_tune_chipset;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;

View File

@ -272,19 +272,20 @@ static int sc1200_ide_dma_end (ide_drive_t *drive)
}
/*
* sc1200_tuneproc() handles selection/setting of PIO modes
* sc1200_set_pio_mode() handles setting of PIO modes
* for both the chipset and drive.
*
* All existing BIOSs for this chipset guarantee that all drives
* will have valid default PIO timings set up before we get here.
*/
static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */
static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
int mode = -1;
/*
* bad abuse of ->tuneproc interface
* bad abuse of ->set_pio_mode interface
*/
switch (pio) {
case 200: mode = XFER_UDMA_0; break;
@ -302,9 +303,6 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au
return;
}
pio = ide_get_best_pio_mode(drive, pio, 4);
printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
sc1200_tunepio(drive, pio);
}
@ -420,7 +418,8 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
hwif->ide_dma_end = &sc1200_ide_dma_end;
if (!noautodma)
hwif->autodma = 1;
hwif->tuneproc = &sc1200_tuneproc;
hwif->set_pio_mode = &sc1200_set_pio_mode;
hwif->speedproc = &sc1200_tune_chipset;
}
hwif->atapi_dma = 1;
@ -436,6 +435,7 @@ static ide_pci_device_t sc1200_chipset __devinitdata = {
.init_hwif = init_hwif_sc1200,
.autodma = AUTODMA,
.bootable = ON_BOARD,
.host_flags = IDE_HFLAG_ABUSE_DMA_MODES,
.pio_mask = ATA_PIO4,
};

View File

@ -221,9 +221,8 @@ static void scc_tune_pio(ide_drive_t *drive, const u8 pio)
out_be32((void __iomem *)pioct_port, reg);
}
static void scc_tuneproc(ide_drive_t *drive, u8 pio)
static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
scc_tune_pio(drive, pio);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -316,7 +315,7 @@ static int scc_config_drive_for_dma(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
scc_tuneproc(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -717,7 +716,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
hwif->dma_setup = scc_dma_setup;
hwif->ide_dma_end = scc_ide_dma_end;
hwif->speedproc = scc_tune_chipset;
hwif->tuneproc = scc_tuneproc;
hwif->set_pio_mode = scc_set_pio_mode;
hwif->ide_dma_check = scc_config_drive_for_dma;
hwif->ide_dma_test_irq = scc_dma_test_irq;
hwif->udma_filter = scc_udma_filter;

View File

@ -202,9 +202,8 @@ static int svwks_tune_chipset(ide_drive_t *drive, const u8 speed)
return (ide_config_drive_speed(drive, speed));
}
static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
svwks_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -217,7 +216,7 @@ static int svwks_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
svwks_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -389,7 +388,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
hwif->tuneproc = &svwks_tune_drive;
hwif->set_pio_mode = &svwks_set_pio_mode;
hwif->speedproc = &svwks_tune_chipset;
hwif->udma_filter = &svwks_udma_filter;

View File

@ -587,7 +587,7 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
hwif->mwdma_mask = 0x2; /* Multimode-2 DMA */
hwif->swdma_mask = 0x2;
hwif->pio_mask = 0x00;
hwif->tuneproc = NULL; /* Sets timing for PIO mode */
hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */
hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */
hwif->selectproc = NULL;/* Use the default routine to select drive */
hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */

View File

@ -219,9 +219,8 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
}
}
static void sil_tuneproc(ide_drive_t *drive, u8 pio)
static void sil_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
sil_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -328,7 +327,7 @@ static int siimage_config_drive_for_dma (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
sil_tuneproc(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -899,7 +898,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
hwif->resetproc = &siimage_reset;
hwif->speedproc = &siimage_tune_chipset;
hwif->tuneproc = &sil_tuneproc;
hwif->set_pio_mode = &sil_set_pio_mode;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
hwif->udma_filter = &sil_udma_filter;

View File

@ -519,14 +519,13 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
}
}
static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
static int sis5513_tune_drive(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
config_art_rwp_pio(drive, pio);
return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static void sis5513_tuneproc(ide_drive_t *drive, u8 pio)
static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
(void)sis5513_tune_drive(drive, pio);
}
@ -621,7 +620,7 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive)
/*
* TODO: always set PIO mode and remove this
*/
sis5513_tuneproc(drive, 255);
ide_set_max_pio(drive);
drive->init_speed = 0;
@ -629,7 +628,7 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
sis5513_tuneproc(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -852,7 +851,7 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
hwif->tuneproc = &sis5513_tuneproc;
hwif->set_pio_mode = &sis_set_pio_mode;
hwif->speedproc = &sis5513_tune_chipset;
if (chipset_family >= ATA_133)

View File

@ -75,16 +75,12 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
/*
* Configure the chipset for PIO mode.
*/
static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
int reg = 0x44 + drive->dn * 4;
u16 drv_ctrl;
DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
pio = ide_get_best_pio_mode(drive, pio, 5);
drv_ctrl = get_pio_timings(drive, pio);
/*
@ -106,8 +102,6 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
ide_xfer_verbose(pio + XFER_PIO_0),
ide_pio_cycle_time(drive, pio), drv_ctrl);
return pio;
}
/*
@ -151,7 +145,7 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed)
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
(void) sl82c105_tune_pio(drive, speed - XFER_PIO_0);
sl82c105_tune_pio(drive, speed - XFER_PIO_0);
break;
default:
return -1;
@ -325,11 +319,10 @@ static void sl82c105_resetproc(ide_drive_t *drive)
* We only deal with PIO mode here - DMA mode 'using_dma' is not
* initialised at the point that this function is called.
*/
static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio)
static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
DBG(("sl82c105_tune_drive(drive:%s, pio:%u)\n", drive->name, pio));
sl82c105_tune_pio(drive, pio);
pio = sl82c105_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -397,7 +390,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
hwif->tuneproc = &sl82c105_tune_drive;
hwif->set_pio_mode = &sl82c105_set_pio_mode;
hwif->speedproc = &sl82c105_tune_chipset;
hwif->selectproc = &sl82c105_selectproc;
hwif->resetproc = &sl82c105_resetproc;

View File

@ -95,9 +95,8 @@ static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
spin_unlock_irqrestore(&ide_lock, flags);
}
static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
slc90e66_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@ -166,7 +165,7 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
slc90e66_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -182,7 +181,7 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
hwif->irq = hwif->channel ? 15 : 14;
hwif->speedproc = &slc90e66_tune_chipset;
hwif->tuneproc = &slc90e66_tune_drive;
hwif->set_pio_mode = &slc90e66_set_pio_mode;
pci_read_config_byte(hwif->pci_dev, 0x47, &reg47);

View File

@ -43,9 +43,8 @@ static int tc86c001_tune_chipset(ide_drive_t *drive, const u8 speed)
return ide_config_drive_speed(drive, speed);
}
static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio)
static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4);
(void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
}
@ -171,7 +170,7 @@ static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
tc86c001_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -193,7 +192,7 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
/* Store the system control register base for convenience... */
hwif->config_data = sc_base;
hwif->tuneproc = &tc86c001_tune_drive;
hwif->set_pio_mode = &tc86c001_set_pio_mode;
hwif->speedproc = &tc86c001_tune_chipset;
hwif->busproc = &tc86c001_busproc;

View File

@ -93,10 +93,9 @@ static int triflex_tune_chipset(ide_drive_t *drive, const u8 speed)
return (ide_config_drive_speed(drive, speed));
}
static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int use_pio = ide_get_best_pio_mode(drive, pio, 4);
(void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
(void)triflex_tune_chipset(drive, XFER_PIO_0 + pio);
}
static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
@ -104,14 +103,14 @@ static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
triflex_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
{
hwif->tuneproc = &triflex_tune_drive;
hwif->set_pio_mode = &triflex_set_pio_mode;
hwif->speedproc = &triflex_tune_chipset;
if (hwif->dma_base == 0)

View File

@ -195,19 +195,16 @@ static int via_set_drive(ide_drive_t *drive, const u8 speed)
}
/**
* via82cxxx_tune_drive - PIO setup
* @drive: drive to set up
* @pio: mode to use (255 for 'best possible')
* via_set_pio_mode - PIO setup
* @drive: drive
* @pio: PIO mode number
*
* A callback from the upper layers for PIO-only tuning.
*/
static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
static void via_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
if (pio == 255)
pio = ide_get_best_pio_mode(drive, 255, 5);
via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5));
via_set_drive(drive, XFER_PIO_0 + pio);
}
/**
@ -223,7 +220,7 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive)
u8 speed = ide_max_dma_mode(drive);
if (speed == 0) {
via82cxxx_tune_drive(drive, 255);
ide_set_max_pio(drive);
return -1;
}
@ -465,7 +462,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->tuneproc = &via82cxxx_tune_drive;
hwif->set_pio_mode = &via_set_pio_mode;
hwif->speedproc = &via_set_drive;

View File

@ -45,7 +45,7 @@ static void print_funcid (int func);
static int check_ide_device (unsigned long base);
static void ide_interrupt_ack (void *dev);
static void m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio);
static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio);
typedef struct ide_ioport_desc {
unsigned long base_off; /* Offset to PCMCIA memory */
@ -314,9 +314,8 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
#endif /* CONFIG_IDE_8xx_PCCARD */
}
/* register routine to tune PIO mode */
ide_hwifs[data_port].pio_mask = ATA_PIO4;
ide_hwifs[data_port].tuneproc = m8xx_ide_tuneproc;
ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
hw->ack_intr = (ide_ack_intr_t *) ide_interrupt_ack;
/* Enable Harddisk Interrupt,
@ -401,9 +400,8 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
*irq = ioport_dsc[data_port].irq;
}
/* register routine to tune PIO mode */
ide_hwifs[data_port].pio_mask = ATA_PIO4;
ide_hwifs[data_port].tuneproc = m8xx_ide_tuneproc;
ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
hw->ack_intr = (ide_ack_intr_t *) ide_interrupt_ack;
/* Enable Harddisk Interrupt,
@ -427,24 +425,13 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */
#endif
/* Calculate PIO timings */
static void
m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio)
static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
volatile pcmconf8xx_t *pcmp;
ulong timing, mask, reg;
#endif
pio = ide_get_best_pio_mode(drive, pio, 4);
#if 1
printk("%s[%d] %s: best PIO mode: %d\n",
__FILE__,__LINE__,__FUNCTION__, pio);
#endif
#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia));
mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF));

View File

@ -411,7 +411,6 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
static void pmac_ide_tuneproc(ide_drive_t *drive, u8 pio);
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
@ -615,7 +614,7 @@ out:
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
static void
pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
u32 *timings;
unsigned accessTicks, recTicks;
@ -629,7 +628,6 @@ pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ide_pio_cycle_time(drive, pio);
switch (pmif->kind) {
@ -966,7 +964,7 @@ static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
pmac_ide_tuneproc(drive, speed & 0x07);
pmac_ide_set_pio_mode(drive, speed & 0x07);
break;
default:
ret = 1;
@ -1241,7 +1239,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->drives[0].unmask = 1;
hwif->drives[1].unmask = 1;
hwif->pio_mask = ATA_PIO4;
hwif->tuneproc = pmac_ide_tuneproc;
hwif->set_pio_mode = pmac_ide_set_pio_mode;
if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
|| pmif->kind == controller_sh_ata6)

View File

@ -634,7 +634,7 @@ typedef struct ide_drive_s {
unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
unsigned int cyl; /* "real" number of cyls */
unsigned int drive_data; /* use by tuneproc/selectproc */
unsigned int drive_data; /* used by set_pio_mode/selectproc */
unsigned int failures; /* current failure count */
unsigned int max_failures; /* maximum allowed failure count */
u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
@ -702,8 +702,8 @@ typedef struct hwif_s {
#if 0
ide_hwif_ops_t *hwifops;
#else
/* routine to tune PIO mode for drives */
void (*tuneproc)(ide_drive_t *, u8);
/* routine to set PIO mode for drives */
void (*set_pio_mode)(ide_drive_t *, const u8);
/* routine to retune DMA modes for drives */
int (*speedproc)(ide_drive_t *, const u8);
/* tweaks hardware to select drive */
@ -1256,6 +1256,12 @@ enum {
IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
/* don't use conservative PIO "downgrade" */
IDE_HFLAG_PIO_NO_DOWNGRADE = (1 << 3),
/* use PIO8/9 for prefetch off/on */
IDE_HFLAG_ABUSE_PREFETCH = (1 << 4),
/* use PIO6/7 for fast-devsel off/on */
IDE_HFLAG_ABUSE_FAST_DEVSEL = (1 << 5),
/* use 100-102 and 200-202 PIO values to set DMA modes */
IDE_HFLAG_ABUSE_DMA_MODES = (1 << 6),
};
typedef struct ide_pci_device_s {
@ -1414,6 +1420,12 @@ unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
extern const ide_pio_timings_t ide_pio_timings[6];
void ide_set_pio(ide_drive_t *, u8);
static inline void ide_set_max_pio(ide_drive_t *drive)
{
ide_set_pio(drive, 255);
}
extern spinlock_t ide_lock;
extern struct mutex ide_cfg_mtx;