Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-28 05:41:55 +00:00
Code Issues Packages Projects Releases Wiki Activity

ARM: SoC platform updates

Browse Source 
SoC platform changes. Main theme this merge window:
 
  - The Netx platform (Netx 100/500) platform is removed by Linus Walleij--
    the SoC doesn't have active maintainers with hardware, and in
    discussions with the vendor the agreement was that it's OK to remove.
 
  - Russell King has a series of patches that cleans up and refactors
    SA1101 and RiscPC support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl0yKOgPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3SNEP/iJsMeeunX0P7Ym3zNFjykhspkkUmo7sEKuz
 NBcexnQpkm+OLgjfwT7j3kXvOs4mzMzH56J6h7dEDSHbQP1MDIgpMw6OEzMMsQTV
 XL1AWz1IO7Sq/mG17daPs9c75o6NYQ7pSEd/ncbjKuJQOpGsi4DyrVrhk9WdzYl2
 hcs4XOzOMZgDTsXHVdWkfpHazpWxEXPCD7v5bt6ueU0YnT3csUbzOTTvw+55JxRV
 fYz0lg4wTMRYMQMOejpx1HXwdmbVOHLUYkCxcLUaVqMnm88q/IddJVklBbPGWAU5
 Z4gFpL+FxcFhEZtu28CoubPYzf/mHDk8Ry2UWwBiRwiGoKfblomI1fpnbyrX53aE
 lpO5p7MfOVVV2WNxpbUND+ilbgKOREfRHd314GLPUjwudp2sTuDRZ1GAbt3JwsIM
 L1HesyjCtb6itCSwGsmmGsX2Wvu+WT7slpsYwHs2qklE/X1zQq0R4Jf2xUNpwqPb
 FqGZAtc6CCQtyF/Mcpp6OQd+cV0tgQVIw7teKol/xR1dSzN/+1zO1J9UHk9/dWUU
 sb5lGa/AtBrIbWxS1qLuA5bgyDqxXYDZi0y/Bu1qMHYebRW37z9kvomtzBiMNX2o
 SAxvr9iGPlTxTjGjRCyBVFmsbCMYLabNoL9tuuXvo+DnjFoOilTef+qePOv7ZYZX
 kwUyS2eu
 =FX6e
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC platform changes. Main theme this merge window:

   - The Netx platform (Netx 100/500) platform is removed by Linus
     Walleij-- the SoC doesn't have active maintainers with hardware,
     and in discussions with the vendor the agreement was that it's OK
     to remove.

   - Russell King has a series of patches that cleans up and refactors
     SA1101 and RiscPC support"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  ARM: stm32: use "depends on" instead of "if" after prompt
  ARM: sa1100: convert to common clock framework
  ARM: exynos: Cleanup cppcheck shifting warning
  ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
  ARM: exynos: Only build MCPM support if used
  arm: add missing include platform-data/atmel.h
  ARM: davinci: Use GPIO lookup table for DA850 LEDs
  ARM: OMAP2: drop explicit assembler architecture
  ARM: use arch_extension directive instead of arch argument
  ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
  ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
  ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
  ARM: riscpc: enable chained scatterlist support
  ARM: riscpc: reduce IRQ handling code
  ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
  ARM: riscpc: parse video information from tagged list
  ARM: riscpc: add ecard quirk for Atomwide 3port serial card
  MAINTAINERS: mvebu: Add git entry
  soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
  ARM: OMAP2+: Make some variables static
  ...
This commit is contained in:
Linus Torvalds 2019-07-19 17:05:08 -07:00
commit 24e44913aa
64 changed files with 504 additions and 963 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
MAINTAINERS
View File

@ -1264,7 +1264,7 @@ F: include/uapi/drm/panfrost_drm.h
ARM MFM AND FLOPPY DRIVERS
M: Ian Molton <spyro@f2s.com>
S: Maintained
F: arch/arm/lib/floppydma.S
F: arch/arm/mach-rpc/floppydma.S
F: arch/arm/include/asm/floppy.h
ARM PMU PROFILING AND DEBUGGING
@ -1863,6 +1863,7 @@ F: arch/arm/mach-orion5x/
F: arch/arm/plat-orion/
F: arch/arm/boot/dts/dove*
F: arch/arm/boot/dts/orion5x*
T: git git://git.infradead.org/linux-mvebu.git
ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support
M: Jason Cooper <jason@lakedaemon.net>
@ -1883,6 +1884,7 @@ F: drivers/irqchip/irq-armada-370-xp.c
F: drivers/irqchip/irq-mvebu-*
F: drivers/pinctrl/mvebu/
F: drivers/rtc/rtc-armada38x.c
T: git git://git.infradead.org/linux-mvebu.git
ARM/Mediatek RTC DRIVER
M: Eddie Huang <eddie.huang@mediatek.com>

14
arch/arm/Kconfig
View File

@ -377,15 +377,6 @@ config ARCH_FOOTBRIDGE
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_NETX
bool "Hilscher NetX based"
select ARM_VIC
select CLKSRC_MMIO
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
help
This enables support for systems based on the Hilscher NetX Soc
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
@ -531,7 +522,7 @@ config ARCH_RPC
select ARCH_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
select ARM_HAS_SG_CHAIN
select CPU_SA110
select FIQ
select HAVE_IDE
@ -552,6 +543,7 @@ config ARCH_SA1100
select CLKSRC_MMIO
select CLKSRC_PXA
select TIMER_OF if OF
select COMMON_CLK
select CPU_FREQ
select CPU_SA1100
select GENERIC_CLOCKEVENTS
@ -770,8 +762,6 @@ source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/mach-mxs/Kconfig"
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/mach-npcm/Kconfig"

7
arch/arm/Kconfig.debug
View File

@ -638,13 +638,6 @@ choice
Say Y here if you want kernel low-level debugging support
for Mediatek mt8135 based platforms on UART3.
config DEBUG_NETX_UART
bool "Kernel low-level debugging messages via NetX UART"
depends on ARCH_NETX
help
Say Y here if you want kernel low-level debugging support
on Hilscher NetX based platforms.
config DEBUG_NOMADIK_UART
bool "Kernel low-level debugging messages via NOMADIK UART"
depends on ARCH_NOMADIK

1
arch/arm/Makefile
View File

@ -191,7 +191,6 @@ machine-$(CONFIG_ARCH_MXC) += imx
machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MILBEAUT) += milbeaut
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
machine-$(CONFIG_ARCH_NPCM) += npcm
machine-$(CONFIG_ARCH_NSPIRE) += nspire

80
arch/arm/configs/netx_defconfig
View File

@ -1,80 +0,0 @@
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_ARCH_NETX=y
CONFIG_MACH_NXDKN=y
CONFIG_MACH_NXDB500=y
CONFIG_MACH_NXEB500HMI=y
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySMX0,115200"
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_NET_IPGRE=m
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_NETFILTER=y
CONFIG_NET_PKTGEN=m
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PLATRAM=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_NETX=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_NETX=y
CONFIG_SERIAL_NETX_CONSOLE=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_RTC_CLASS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRC_CCITT=m
CONFIG_LIBCRC32C=m

32
arch/arm/include/debug/netx.S
View File

@ -1,32 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*/
#define UART_DATA 0
#define UART_FLAG 0x18
#define UART_FLAG_BUSY (1 << 3)
.macro addruart, rp, rv, tmp
ldr \rp, =CONFIG_DEBUG_UART_PHYS
ldr \rv, =CONFIG_DEBUG_UART_VIRT
.endm
.macro senduart,rd,rx
str \rd, [\rx, #UART_DATA]
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #UART_FLAG]
tst \rd, #UART_FLAG_BUSY
bne 1002b
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #UART_FLAG]
tst \rd, #UART_FLAG_BUSY
bne 1001b
.endm

1
arch/arm/lib/Makefile
View File

@ -31,7 +31,6 @@ else
endif
ifeq ($(CONFIG_ARCH_RPC),y)
lib-y += ecard.o io-acorn.o floppydma.o
AFLAGS_delay-loop.o += -march=armv4
endif

1
arch/arm/mach-at91/pm.c
View File

@ -15,6 +15,7 @@
#include <linux/suspend.h>
#include <linux/clk/at91_pmc.h>
#include <linux/platform_data/atmel.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>

2
arch/arm/mach-bcm/Kconfig
View File

@ -208,6 +208,7 @@ config ARCH_BCM_63XX
config ARCH_BRCMSTB
bool "Broadcom BCM7XXX based boards"
depends on ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select ARM_GIC
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
@ -217,6 +218,7 @@ config ARCH_BRCMSTB
select ZONE_DMA if ARM_LPAE
select SOC_BRCMSTB
select SOC_BUS
select PINCTRL
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.

3
arch/arm/mach-bcm/Makefile
View File

@ -40,9 +40,6 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
# Support for secure monitor traps
obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec)
CFLAGS_bcm_kona_smc.o += -Wa,-march=armv7-a+sec -DREQUIRES_SEC
endif
# BCM2835
obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o

1
arch/arm/mach-bcm/bcm63xx_smp.c
View File

@ -141,6 +141,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu,
* return
*/
ret = bcm63xx_pmb_power_on_cpu(dn);
of_node_put(dn);
if (ret)
goto out;
out:

2
arch/arm/mach-bcm/bcm_kona_smc.c
View File

@ -125,9 +125,7 @@ static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys)
__asmeq("%2", "r4")
__asmeq("%3", "r5")
__asmeq("%4", "r6")
#ifdef REQUIRES_SEC
".arch_extension sec\n"
#endif
" smc #0\n"
: "=r" (ip), "=r" (r0)
: "r" (r4), "r" (r5), "r" (r6)

1
arch/arm/mach-bcm/board_bcm281xx.c
View File

@ -38,6 +38,7 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
return;
}
base = of_iomap(np_wdog, 0);
of_node_put(np_wdog);
if (!base) {
pr_emerg("Couldn't map brcm,kona-wdt\n");
return;

7
arch/arm/mach-bcm/platsmp-brcmstb.c
View File

@ -334,11 +334,14 @@ static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
rc = setup_hifcpubiuctrl_regs(np);
if (rc)
return;
goto out_put_node;
rc = setup_hifcont_regs(np);
if (rc)
return;
goto out_put_node;
out_put_node:
of_node_put(np);
}
static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)

43
arch/arm/mach-davinci/board-da850-evm.c
View File

@ -631,13 +631,12 @@ static void da850_evm_bb_keys_init(unsigned gpio)
}
}
#define DA850_N_BB_USER_LED 2
static struct gpio_led da850_evm_bb_leds[] = {
[0 ... DA850_N_BB_USER_LED - 1] = {
.active_low = 1,
.gpio = -1, /* assigned at runtime */
.name = NULL, /* assigned at runtime */
{
.name = "user_led2",
},
{
.name = "user_led1",
},
};
@ -646,6 +645,20 @@ static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
};
static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = {
.dev_id = "leds-gpio",
.table = {
GPIO_LOOKUP_IDX("i2c-bb-expander",
DA850_EVM_BB_EXP_USER_LED2, NULL,
0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("i2c-bb-expander",
DA850_EVM_BB_EXP_USER_LED2 + 1, NULL,
1, GPIO_ACTIVE_LOW),
{ },
},
};
static struct platform_device da850_evm_bb_leds_device = {
.name = "leds-gpio",
.id = -1,
@ -654,20 +667,6 @@ static struct platform_device da850_evm_bb_leds_device = {
}
};
static void da850_evm_bb_leds_init(unsigned gpio)
{
int i;
struct gpio_led *led;
for (i = 0; i < DA850_N_BB_USER_LED; i++) {
led = &da850_evm_bb_leds[i];
led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i;
led->name =
da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i];
}
}
static int da850_evm_bb_expander_setup(struct i2c_client *client,
unsigned gpio, unsigned ngpio,
void *c)
@ -685,7 +684,7 @@ static int da850_evm_bb_expander_setup(struct i2c_client *client,
goto io_exp_setup_sw_fail;
}
da850_evm_bb_leds_init(gpio);
gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table);
ret = platform_device_register(&da850_evm_bb_leds_device);
if (ret) {
pr_warn("Could not register baseboard GPIO expander LEDs");
@ -729,10 +728,12 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
},
{
I2C_BOARD_INFO("tca6416", 0x20),
.dev_name = "ui-expander",
.platform_data = &da850_evm_ui_expander_info,
},
{
I2C_BOARD_INFO("tca6416", 0x21),
.dev_name = "bb-expander",
.platform_data = &da850_evm_bb_expander_info,
},
};

7
arch/arm/mach-exynos/Kconfig
View File

@ -49,6 +49,7 @@ config S5P_DEV_MFC
config ARCH_EXYNOS3
bool "SAMSUNG EXYNOS3"
default y
select ARM_CPU_SUSPEND if PM
help
Samsung EXYNOS3 (Cortex-A7) SoC based systems
@ -106,7 +107,7 @@ config SOC_EXYNOS5420
bool "SAMSUNG EXYNOS5420"
default y
depends on ARCH_EXYNOS5
select MCPM if SMP
select EXYNOS_MCPM if SMP
select ARM_CCI400_PORT_CTRL
select ARM_CPU_SUSPEND
@ -115,6 +116,10 @@ config SOC_EXYNOS5800
default y
depends on SOC_EXYNOS5420
config EXYNOS_MCPM
bool
select MCPM
config EXYNOS_CPU_SUSPEND
bool
select ARM_CPU_SUSPEND

6
arch/arm/mach-exynos/Makefile
View File

@ -14,9 +14,5 @@ obj-$(CONFIG_PM_SLEEP) += suspend.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_MCPM) += mcpm-exynos.o
obj-$(CONFIG_EXYNOS_MCPM) += mcpm-exynos.o
CFLAGS_mcpm-exynos.o += -march=armv7-a

3
arch/arm/mach-exynos/exynos-smc.S
View File

@ -10,7 +10,8 @@
/*
* Function signature: void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3)
*/
.arch armv7-a
.arch_extension sec
ENTRY(exynos_smc)
stmfd sp!, {r4-r11, lr}
dsb

3
arch/arm/mach-exynos/sleep.S
View File

@ -44,7 +44,8 @@ ENTRY(exynos_cpu_resume)
ENDPROC(exynos_cpu_resume)
.align
.arch armv7-a
.arch_extension sec
ENTRY(exynos_cpu_resume_ns)
mrc p15, 0, r0, c0, c0, 0
ldr r1, =CPU_MASK

8
arch/arm/mach-exynos/suspend.c
View File

@ -268,7 +268,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
if (IS_ENABLED(CONFIG_MCPM)) {
if (IS_ENABLED(CONFIG_EXYNOS_MCPM)) {
mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
mcpm_cpu_suspend();
}
@ -285,7 +285,7 @@ static void exynos_pm_set_wakeup_mask(void)
* Set wake-up mask registers
* EXYNOS_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend.
*/
pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
pmu_raw_writel(exynos_irqwake_intmask & ~BIT(31), S5P_WAKEUP_MASK);
}
static void exynos_pm_enter_sleep_mode(void)
@ -351,7 +351,7 @@ static void exynos5420_pm_prepare(void)
exynos_pm_enter_sleep_mode();
/* ensure at least INFORM0 has the resume address */
if (IS_ENABLED(CONFIG_MCPM))
if (IS_ENABLED(CONFIG_EXYNOS_MCPM))
pmu_raw_writel(__pa_symbol(mcpm_entry_point), S5P_INFORM0);
tmp = pmu_raw_readl(EXYNOS_L2_OPTION(0));
@ -455,7 +455,7 @@ static void exynos5420_prepare_pm_resume(void)
mpidr = read_cpuid_mpidr();
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
if (IS_ENABLED(CONFIG_MCPM))
if (IS_ENABLED(CONFIG_EXYNOS_MCPM))
WARN_ON(mcpm_cpu_powered_up());
if (IS_ENABLED(CONFIG_HW_PERF_EVENTS) && cluster != 0) {

3
arch/arm/mach-highbank/Makefile
View File

@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-y := highbank.o system.o smc.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_PM_SLEEP) += pm.o

3
arch/arm/mach-highbank/smc.S
View File

@ -13,7 +13,8 @@
* the monitor API number.
* Function signature : void highbank_smc1(u32 fn, u32 arg)
*/
.arch armv7-a
.arch_extension sec
ENTRY(highbank_smc1)
stmfd sp!, {r4-r11, lr}
mov r12, r0

10
arch/arm/mach-imx/cpuidle-imx6q.c
View File

@ -14,22 +14,22 @@
#include "hardware.h"
static int num_idle_cpus = 0;
static DEFINE_SPINLOCK(cpuidle_lock);
static DEFINE_RAW_SPINLOCK(cpuidle_lock);
static int imx6q_enter_wait(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
spin_lock(&cpuidle_lock);
raw_spin_lock(&cpuidle_lock);
if (++num_idle_cpus == num_online_cpus())
imx6_set_lpm(WAIT_UNCLOCKED);
spin_unlock(&cpuidle_lock);
raw_spin_unlock(&cpuidle_lock);
cpu_do_idle();
spin_lock(&cpuidle_lock);
raw_spin_lock(&cpuidle_lock);
if (num_idle_cpus-- == num_online_cpus())
imx6_set_lpm(WAIT_CLOCKED);
spin_unlock(&cpuidle_lock);
raw_spin_unlock(&cpuidle_lock);
return index;
}

7
arch/arm/mach-imx/mach-imx7d.c
View File

@ -94,6 +94,12 @@ static void __init imx7d_init_machine(void)
imx7d_enet_init();
}
static void __init imx7d_init_late(void)
{
if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
}
static void __init imx7d_init_irq(void)
{
imx_init_revision_from_anatop();
@ -110,5 +116,6 @@ static const char *const imx7d_dt_compat[] __initconst = {
DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
.init_irq = imx7d_init_irq,
.init_machine = imx7d_init_machine,
.init_late = imx7d_init_late,
.dt_compat = imx7d_dt_compat,
MACHINE_END

3
arch/arm/mach-keystone/Makefile
View File

@ -1,9 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-y := keystone.o smc.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_SMP) += platsmp.o
# PM domain driver for Keystone SOCs

1
arch/arm/mach-keystone/smc.S
View File

@ -18,6 +18,7 @@
*
* Return: Non zero value on failure
*/
.arch_extension sec
ENTRY(keystone_cpu_smc)
stmfd sp!, {r4-r11, lr}
smc #0

13
arch/arm/mach-omap2/Makefile
View File

@ -41,18 +41,10 @@ obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o
obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common)
obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-common) $(smp-y) sleep44xx.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec)
# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
AFLAGS_sram242x.o :=-Wa,-march=armv6
AFLAGS_sram243x.o :=-Wa,-march=armv6
# Restart code (OMAP4/5 currently in omap4-common.c)
obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o
@ -94,11 +86,6 @@ obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_sleep33xx.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_sleep43xx.o :=-Wa,-march=armv7-a$(plus_sec)
endif
ifeq ($(CONFIG_CPU_IDLE),y)

2
arch/arm/mach-omap2/omap-headsmp.S
View File

@ -55,6 +55,8 @@ ENDPROC(omap5_secondary_startup)
* omap5_secondary_startup if the primary CPU was put into HYP mode by
* the boot loader.
*/
.arch armv7-a
.arch_extension sec
ENTRY(omap5_secondary_hyp_startup)
wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
ldr r0, [r2]

3
arch/arm/mach-omap2/omap-smc.S
View File

@ -20,7 +20,8 @@
* link register "lr".
* Function signature : void omap_smc1(u32 fn, u32 arg)
*/
.arch armv7-a
.arch_extension sec
ENTRY(omap_smc1)
stmfd sp!, {r2-r12, lr}
mov r12, r0

8
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
View File

@ -529,7 +529,7 @@ static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
.sysc_fields = &omap_hwmod_sysc_type1,
};
struct omap_hwmod_class am33xx_gpio_hwmod_class = {
static struct omap_hwmod_class am33xx_gpio_hwmod_class = {
.name = "gpio",
.sysc = &am33xx_gpio_sysc,
};
@ -539,7 +539,7 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio1_dbclk" },
};
struct omap_hwmod am33xx_gpio1_hwmod = {
static struct omap_hwmod am33xx_gpio1_hwmod = {
.name = "gpio2",
.class = &am33xx_gpio_hwmod_class,
.clkdm_name = "l4ls_clkdm",
@ -559,7 +559,7 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio2_dbclk" },
};
struct omap_hwmod am33xx_gpio2_hwmod = {
static struct omap_hwmod am33xx_gpio2_hwmod = {
.name = "gpio3",
.class = &am33xx_gpio_hwmod_class,
.clkdm_name = "l4ls_clkdm",
@ -579,7 +579,7 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio3_dbclk" },
};
struct omap_hwmod am33xx_gpio3_hwmod = {
static struct omap_hwmod am33xx_gpio3_hwmod = {
.name = "gpio4",
.class = &am33xx_gpio_hwmod_class,
.clkdm_name = "l4ls_clkdm",

1
arch/arm/mach-omap2/sleep33xx.S
View File

@ -24,6 +24,7 @@
#define BIT(nr) (1 << (nr))
.arm
.arch armv7-a
.align 3
ENTRY(am33xx_do_wfi)

2
arch/arm/mach-omap2/sleep34xx.S
View File

@ -83,6 +83,8 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore)
*
* r0 = physical address of the parameters
*/
.arch armv7-a
.arch_extension sec
ENTRY(save_secure_ram_context)
stmfd sp!, {r4 - r11, lr} @ save registers on stack
mov r3, r0 @ physical address of parameters

2
arch/arm/mach-omap2/sleep43xx.S
View File

@ -56,6 +56,8 @@
#define RTC_PMIC_EXT_WAKEUP_EN BIT(0)
.arm
.arch armv7-a
.arch_extension sec
.align 3
ENTRY(am43xx_do_wfi)

3
arch/arm/mach-omap2/sleep44xx.S
View File

@ -18,8 +18,11 @@
#include "omap44xx.h"
#include "omap4-sar-layout.h"
.arch armv7-a
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
.arch_extension sec
.macro DO_SMC
dsb
smc #0

4
arch/arm/mach-pxa/include/mach/lubbock.h
View File

@ -47,7 +47,3 @@
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32)
#ifndef __ASSEMBLY__
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
#endif

3
arch/arm/mach-pxa/lubbock.c
View File

@ -116,12 +116,11 @@ void lubbock_set_hexled(uint32_t value)
static struct gpio_chip *lubbock_misc_wr_gc;
void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
{
unsigned long m = mask, v = set;
lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
}
EXPORT_SYMBOL(lubbock_set_misc_wr);
static int lubbock_udc_is_connected(void)
{

12
arch/arm/mach-rockchip/platsmp.c
View File

@ -269,19 +269,25 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
sram_base_addr = of_iomap(node, 0);
if (!sram_base_addr) {
pr_err("%s: could not map sram registers\n", __func__);
of_node_put(node);
return;
}
if (has_pmu && rockchip_smp_prepare_pmu())
if (has_pmu && rockchip_smp_prepare_pmu()) {
of_node_put(node);
return;
}
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
if (rockchip_smp_prepare_sram(node))
if (rockchip_smp_prepare_sram(node)) {
of_node_put(node);
return;
}
/* enable the SCU power domain */
pmu_set_power_domain(PMU_PWRDN_SCU, true);
of_node_put(node);
node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
if (!node) {
pr_err("%s: missing scu\n", __func__);
@ -291,6 +297,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
scu_base_addr = of_iomap(node, 0);
if (!scu_base_addr) {
pr_err("%s: could not map scu registers\n", __func__);
of_node_put(node);
return;
}
@ -309,6 +316,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
ncores = ((l2ctlr >> 24) & 0x3) + 1;
}
of_node_put(node);
/* Make sure that all cores except the first are really off */
for (i = 1; i < ncores; i++)

2
arch/arm/mach-rockchip/pm.c
View File

@ -257,12 +257,14 @@ static int __init rk3288_suspend_init(struct device_node *np)
rk3288_bootram_base = of_iomap(sram_np, 0);
if (!rk3288_bootram_base) {
pr_err("%s: could not map bootram base\n", __func__);
of_node_put(sram_np);
return -ENOMEM;
}
ret = of_address_to_resource(sram_np, 0, &res);
if (ret) {
pr_err("%s: could not get bootram phy addr\n", __func__);
of_node_put(sram_np);
return ret;
}
rk3288_bootram_phy = res.start;

3
arch/arm/mach-rpc/Makefile
View File

@ -5,4 +5,5 @@
# Object file lists.
obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o
obj-y :=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \
riscpc.o time.o

93
arch/arm/mach-rpc/dma.c
View File

@ -24,10 +24,11 @@
struct iomd_dma {
struct dma_struct dma;
unsigned int state;
unsigned long base; /* Controller base address */
void __iomem *base; /* Controller base address */
int irq; /* Controller IRQ */
struct scatterlist cur_sg; /* Current controller buffer */
unsigned int state;
dma_addr_t cur_addr;
unsigned int cur_len;
dma_addr_t dma_addr;
unsigned int dma_len;
};
@ -50,13 +51,13 @@ typedef enum {
#define CR (IOMD_IO0CR - IOMD_IO0CURA)
#define ST (IOMD_IO0ST - IOMD_IO0CURA)
static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
static void iomd_get_next_sg(struct iomd_dma *idma)
{
unsigned long end, offset, flags = 0;
if (idma->dma.sg) {
sg->dma_address = idma->dma_addr;
offset = sg->dma_address & ~PAGE_MASK;
idma->cur_addr = idma->dma_addr;
offset = idma->cur_addr & ~PAGE_MASK;
end = offset + idma->dma_len;
@ -66,7 +67,7 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
if (offset + TRANSFER_SIZE >= end)
flags |= DMA_END_L;
sg->length = end - TRANSFER_SIZE;
idma->cur_len = end - TRANSFER_SIZE;
idma->dma_len -= end - offset;
idma->dma_addr += end - offset;
@ -84,52 +85,49 @@ static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
}
} else {
flags = DMA_END_S | DMA_END_L;
sg->dma_address = 0;
sg->length = 0;
idma->cur_addr = 0;
idma->cur_len = 0;
}
sg->length |= flags;
idma->cur_len |= flags;
}
static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
{
struct iomd_dma *idma = dev_id;
unsigned long base = idma->base;
void __iomem *base = idma->base;
unsigned int state = idma->state;
unsigned int status, cur, end;
do {
unsigned int status;
status = iomd_readb(base + ST);
status = readb(base + ST);
if (!(status & DMA_ST_INT))
return IRQ_HANDLED;
goto out;
if ((idma->state ^ status) & DMA_ST_AB)
iomd_get_next_sg(&idma->cur_sg, idma);
if ((state ^ status) & DMA_ST_AB)
iomd_get_next_sg(idma);
switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
case DMA_ST_OFL: /* OIA */
case DMA_ST_AB: /* .IB */
iomd_writel(idma->cur_sg.dma_address, base + CURA);
iomd_writel(idma->cur_sg.length, base + ENDA);
idma->state = DMA_ST_AB;
break;
case DMA_ST_OFL | DMA_ST_AB: /* OIB */
case 0: /* .IA */
iomd_writel(idma->cur_sg.dma_address, base + CURB);
iomd_writel(idma->cur_sg.length, base + ENDB);
idma->state = 0;
break;
// This efficiently implements state = OFL != AB ? AB : 0
state = ((status >> 2) ^ status) & DMA_ST_AB;
if (state) {
cur = CURA;
end = ENDA;
} else {
cur = CURB;
end = ENDB;
}
writel(idma->cur_addr, base + cur);
writel(idma->cur_len, base + end);
if (status & DMA_ST_OFL &&
idma->cur_sg.length == (DMA_END_S|DMA_END_L))
idma->cur_len == (DMA_END_S|DMA_END_L))
break;
} while (1);
idma->state = ~DMA_ST_AB;
disable_irq(irq);
state = ~DMA_ST_AB;
disable_irq_nosync(irq);
out:
idma->state = state;
return IRQ_HANDLED;
}
@ -157,7 +155,7 @@ static struct device isa_dma_dev = {
static void iomd_enable_dma(unsigned int chan, dma_t *dma)
{
struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
unsigned long dma_base = idma->base;
void __iomem *base = idma->base;
unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
if (idma->dma.invalid) {
@ -177,27 +175,30 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma)
DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
iomd_writeb(DMA_CR_C, dma_base + CR);
idma->dma_addr = idma->dma.sg->dma_address;
idma->dma_len = idma->dma.sg->length;
writeb(DMA_CR_C, base + CR);
idma->state = DMA_ST_AB;
}
if (idma->dma.dma_mode == DMA_MODE_READ)
ctrl |= DMA_CR_D;
iomd_writeb(ctrl, dma_base + CR);
writeb(ctrl, base + CR);
enable_irq(idma->irq);
}
static void iomd_disable_dma(unsigned int chan, dma_t *dma)
{
struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
unsigned long dma_base = idma->base;
void __iomem *base = idma->base;
unsigned long flags;
local_irq_save(flags);
if (idma->state != ~DMA_ST_AB)
disable_irq(idma->irq);
iomd_writeb(0, dma_base + CR);
writeb(0, base + CR);
local_irq_restore(flags);
}
@ -360,17 +361,17 @@ static int __init rpc_dma_init(void)
*/
iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
iomd_dma[DMA_0].base = IOMD_IO0CURA;
iomd_dma[DMA_0].base = IOMD_BASE + IOMD_IO0CURA;
iomd_dma[DMA_0].irq = IRQ_DMA0;
iomd_dma[DMA_1].base = IOMD_IO1CURA;
iomd_dma[DMA_1].base = IOMD_BASE + IOMD_IO1CURA;
iomd_dma[DMA_1].irq = IRQ_DMA1;
iomd_dma[DMA_2].base = IOMD_IO2CURA;
iomd_dma[DMA_2].base = IOMD_BASE + IOMD_IO2CURA;
iomd_dma[DMA_2].irq = IRQ_DMA2;
iomd_dma[DMA_3].base = IOMD_IO3CURA;
iomd_dma[DMA_3].base = IOMD_BASE + IOMD_IO3CURA;
iomd_dma[DMA_3].irq = IRQ_DMA3;
iomd_dma[DMA_S0].base = IOMD_SD0CURA;
iomd_dma[DMA_S0].base = IOMD_BASE + IOMD_SD0CURA;
iomd_dma[DMA_S0].irq = IRQ_DMAS0;
iomd_dma[DMA_S1].base = IOMD_SD1CURA;
iomd_dma[DMA_S1].base = IOMD_BASE + IOMD_SD1CURA;
iomd_dma[DMA_S1].irq = IRQ_DMAS1;
for (i = DMA_0; i <= DMA_S1; i++) {

0
arch/arm/lib/ecard.S → arch/arm/mach-rpc/ecard-loader.S
View File

32
arch/arm/mach-rpc/ecard.c
View File

@ -67,17 +67,21 @@ struct expcard_blacklist {
unsigned short manufacturer;
unsigned short product;
const char *type;
void (*init)(ecard_t *ec);
};
static ecard_t *cards;
static ecard_t *slot_to_expcard[MAX_ECARDS];
static unsigned int ectcr;
static void atomwide_3p_quirk(ecard_t *ec);
/* List of descriptions of cards which don't have an extended
* identification, or chunk directories containing a description.
*/
static struct expcard_blacklist __initdata blacklist[] = {
{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }
{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" },
{ MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk },
};
asmlinkage extern int
@ -493,18 +497,21 @@ static void ecard_dump_irq_state(void)
printk("Expansion card IRQ state:\n");
for (ec = cards; ec; ec = ec->next) {
const char *claimed;
if (ec->slot_no == 8)
continue;
printk(" %d: %sclaimed, ",
ec->slot_no, ec->claimed ? "" : "not ");
claimed = ec->claimed ? "" : "not ";
if (ec->ops && ec->ops->irqpending &&
ec->ops != &ecard_default_ops)
printk("irq %spending\n",
printk(" %d: %sclaimed irq %spending\n",
ec->slot_no, claimed,
ec->ops->irqpending(ec) ? "" : "not ");
else
printk("irqaddr %p, mask = %02X, status = %02X\n",
printk(" %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n",
ec->slot_no, claimed,
ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
}
}
@ -865,6 +872,16 @@ void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
}
EXPORT_SYMBOL(ecardm_iomap);
static void atomwide_3p_quirk(ecard_t *ec)
{
void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC);
unsigned int i;
/* Disable interrupts on each port */
for (i = 0x2000; i <= 0x2800; i += 0x0400)
writeb(0, addr + i + 4);
}
/*
* Probe for an expansion card.
*
@ -921,7 +938,10 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
for (i = 0; i < ARRAY_SIZE(blacklist); i++)
if (blacklist[i].manufacturer == ec->cid.manufacturer &&
blacklist[i].product == ec->cid.product) {
ec->card_desc = blacklist[i].type;
if (blacklist[i].type)
ec->card_desc = blacklist[i].type;
if (blacklist[i].init)
blacklist[i].init(ec);
break;
}

0
arch/arm/lib/floppydma.S → arch/arm/mach-rpc/floppydma.S
View File

23
arch/arm/mach-rpc/include/mach/uncompress.h
View File

@ -115,29 +115,22 @@ static void arch_decomp_setup(void)
struct tag *t = (struct tag *)params;
unsigned int nr_pages = 0, page_size = PAGE_SIZE;
if (t->hdr.tag == ATAG_CORE)
{
for (; t->hdr.size; t = tag_next(t))
{
if (t->hdr.tag == ATAG_VIDEOTEXT)
{
if (t->hdr.tag == ATAG_CORE) {
for (; t->hdr.size; t = tag_next(t)) {
if (t->hdr.tag == ATAG_VIDEOTEXT) {
video_num_rows = t->u.videotext.video_lines;
video_num_cols = t->u.videotext.video_cols;
bytes_per_char_h = t->u.videotext.video_points;
bytes_per_char_v = t->u.videotext.video_points;
video_x = t->u.videotext.x;
video_y = t->u.videotext.y;
}
if (t->hdr.tag == ATAG_MEM)
{
} else if (t->hdr.tag == ATAG_VIDEOLFB) {
bytes_per_char_h = t->u.videolfb.lfb_depth;
bytes_per_char_v = 8;
} else if (t->hdr.tag == ATAG_MEM) {
page_size = PAGE_SIZE;
nr_pages += (t->u.mem.size / PAGE_SIZE);
}
}
}
else
{
} else {
nr_pages = params->nr_pages;
page_size = params->page_size;
video_num_rows = params->video_num_rows;

0
arch/arm/lib/io-acorn.S → arch/arm/mach-rpc/io-acorn.S
View File

156
arch/arm/mach-rpc/irq.c
View File

@ -8,117 +8,71 @@
#include <asm/irq.h>
#include <asm/fiq.h>
static void iomd_ack_irq_a(struct irq_data *d)
{
unsigned int val, mask;
// These are offsets from the stat register for each IRQ bank
#define STAT 0x00
#define REQ 0x04
#define CLR 0x04
#define MASK 0x08
mask = 1 << d->irq;
val = iomd_readb(IOMD_IRQMASKA);
iomd_writeb(val & ~mask, IOMD_IRQMASKA);
iomd_writeb(mask, IOMD_IRQCLRA);
static void __iomem *iomd_get_base(struct irq_data *d)
{
void *cd = irq_data_get_irq_chip_data(d);
return (void __iomem *)(unsigned long)cd;
}
static void iomd_mask_irq_a(struct irq_data *d)
static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask)
{
unsigned int val, mask;
struct irq_data *d = irq_get_irq_data(irq);
mask = 1 << d->irq;
val = iomd_readb(IOMD_IRQMASKA);
iomd_writeb(val & ~mask, IOMD_IRQMASKA);
d->mask = mask;
irq_set_chip_data(irq, (void *)(unsigned long)base);
}
static void iomd_unmask_irq_a(struct irq_data *d)
static void iomd_irq_mask_ack(struct irq_data *d)
{
unsigned int val, mask;
void __iomem *base = iomd_get_base(d);
unsigned int val, mask = d->mask;
mask = 1 << d->irq;
val = iomd_readb(IOMD_IRQMASKA);
iomd_writeb(val | mask, IOMD_IRQMASKA);
val = readb(base + MASK);
writeb(val & ~mask, base + MASK);
writeb(mask, base + CLR);
}
static struct irq_chip iomd_a_chip = {
.irq_ack = iomd_ack_irq_a,
.irq_mask = iomd_mask_irq_a,
.irq_unmask = iomd_unmask_irq_a,
static void iomd_irq_mask(struct irq_data *d)
{
void __iomem *base = iomd_get_base(d);
unsigned int val, mask = d->mask;
val = readb(base + MASK);
writeb(val & ~mask, base + MASK);
}
static void iomd_irq_unmask(struct irq_data *d)
{
void __iomem *base = iomd_get_base(d);
unsigned int val, mask = d->mask;
val = readb(base + MASK);
writeb(val | mask, base + MASK);
}
static struct irq_chip iomd_chip_clr = {
.irq_mask_ack = iomd_irq_mask_ack,
.irq_mask = iomd_irq_mask,
.irq_unmask = iomd_irq_unmask,
};
static void iomd_mask_irq_b(struct irq_data *d)
{
unsigned int val, mask;
mask = 1 << (d->irq & 7);
val = iomd_readb(IOMD_IRQMASKB);
iomd_writeb(val & ~mask, IOMD_IRQMASKB);
}
static void iomd_unmask_irq_b(struct irq_data *d)
{
unsigned int val, mask;
mask = 1 << (d->irq & 7);
val = iomd_readb(IOMD_IRQMASKB);
iomd_writeb(val | mask, IOMD_IRQMASKB);
}
static struct irq_chip iomd_b_chip = {
.irq_ack = iomd_mask_irq_b,
.irq_mask = iomd_mask_irq_b,
.irq_unmask = iomd_unmask_irq_b,
};
static void iomd_mask_irq_dma(struct irq_data *d)
{
unsigned int val, mask;
mask = 1 << (d->irq & 7);
val = iomd_readb(IOMD_DMAMASK);
iomd_writeb(val & ~mask, IOMD_DMAMASK);
}
static void iomd_unmask_irq_dma(struct irq_data *d)
{
unsigned int val, mask;
mask = 1 << (d->irq & 7);
val = iomd_readb(IOMD_DMAMASK);
iomd_writeb(val | mask, IOMD_DMAMASK);
}
static struct irq_chip iomd_dma_chip = {
.irq_ack = iomd_mask_irq_dma,
.irq_mask = iomd_mask_irq_dma,
.irq_unmask = iomd_unmask_irq_dma,
};
static void iomd_mask_irq_fiq(struct irq_data *d)
{
unsigned int val, mask;
mask = 1 << (d->irq & 7);
val = iomd_readb(IOMD_FIQMASK);
iomd_writeb(val & ~mask, IOMD_FIQMASK);
}
static void iomd_unmask_irq_fiq(struct irq_data *d)
{
unsigned int val, mask;
mask = 1 << (d->irq & 7);
val = iomd_readb(IOMD_FIQMASK);
iomd_writeb(val | mask, IOMD_FIQMASK);
}
static struct irq_chip iomd_fiq_chip = {
.irq_ack = iomd_mask_irq_fiq,
.irq_mask = iomd_mask_irq_fiq,
.irq_unmask = iomd_unmask_irq_fiq,
static struct irq_chip iomd_chip_noclr = {
.irq_mask = iomd_irq_mask,
.irq_unmask = iomd_irq_unmask,
};
extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
void __init rpc_init_irq(void)
{
unsigned int irq, clr, set = 0;
unsigned int irq, clr, set;
iomd_writeb(0, IOMD_IRQMASKA);
iomd_writeb(0, IOMD_IRQMASKB);
@ -130,6 +84,7 @@ void __init rpc_init_irq(void)
for (irq = 0; irq < NR_IRQS; irq++) {
clr = IRQ_NOREQUEST;
set = 0;
if (irq <= 6 || (irq >= 9 && irq <= 15))
clr |= IRQ_NOPROBE;
@ -140,30 +95,37 @@ void __init rpc_init_irq(void)
switch (irq) {
case 0 ... 7:
irq_set_chip_and_handler(irq, &iomd_a_chip,
irq_set_chip_and_handler(irq, &iomd_chip_clr,
handle_level_irq);
irq_modify_status(irq, clr, set);
iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA,
BIT(irq));
break;
case 8 ... 15:
irq_set_chip_and_handler(irq, &iomd_b_chip,
irq_set_chip_and_handler(irq, &iomd_chip_noclr,
handle_level_irq);
irq_modify_status(irq, clr, set);
iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB,
BIT(irq - 8));
break;
case 16 ... 21:
irq_set_chip_and_handler(irq, &iomd_dma_chip,
irq_set_chip_and_handler(irq, &iomd_chip_noclr,
handle_level_irq);
irq_modify_status(irq, clr, set);
iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT,
BIT(irq - 16));
break;
case 64 ... 71:
irq_set_chip(irq, &iomd_fiq_chip);
irq_set_chip(irq, &iomd_chip_noclr);
irq_modify_status(irq, clr, set);
iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT,
BIT(irq - 64));
break;
}
}
init_FIQ(FIQ_START);
}

38
arch/arm/mach-rpc/time.c
View File

@ -10,7 +10,7 @@
* 04-Dec-1997 RMK Updated for new arch/arm/time.c
* 13=Jun-2004 DS Moved to arch/arm/common b/c shared w/CLPS7500
*/
#include <linux/timex.h>
#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@ -24,11 +24,15 @@
#define RPC_CLOCK_FREQ 2000000
#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
static u32 ioc_timer_gettimeoffset(void)
static u32 ioc_time;
static u64 ioc_timer_read(struct clocksource *cs)
{
unsigned int count1, count2, status;
long offset;
unsigned long flags;
u32 ticks;
local_irq_save(flags);
ioc_writeb (0, IOC_T0LATCH);
barrier ();
count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
@ -38,27 +42,34 @@ static u32 ioc_timer_gettimeoffset(void)
ioc_writeb (0, IOC_T0LATCH);
barrier ();
count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
ticks = ioc_time + RPC_LATCH - count2;
local_irq_restore(flags);
offset = count2;
if (count2 < count1) {
/*
* We have not had an interrupt between reading count1
* and count2.
* The timer has not reloaded between reading count1 and
* count2, check whether an interrupt was actually pending.
*/
if (status & (1 << 5))
offset -= RPC_LATCH;
ticks += RPC_LATCH;
} else if (count2 > count1) {
/*
* We have just had another interrupt between reading
* count1 and count2.
* The timer has reloaded, so count2 indicates the new
* count since the wrap. The interrupt would not have
* been processed, so add the missed ticks.
*/
offset -= RPC_LATCH;
ticks += RPC_LATCH;
}
offset = (RPC_LATCH - offset) * (tick_nsec / 1000);
return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000;
return ticks;
}
static struct clocksource ioctime_clocksource = {
.read = ioc_timer_read,
.mask = CLOCKSOURCE_MASK(32),
.rating = 100,
};
void __init ioctime_init(void)
{
ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
@ -69,6 +80,7 @@ void __init ioctime_init(void)
static irqreturn_t
ioc_timer_interrupt(int irq, void *dev_id)
{
ioc_time += RPC_LATCH;
timer_tick();
return IRQ_HANDLED;
}
@ -83,7 +95,7 @@ static struct irqaction ioc_timer_irq = {
*/
void __init ioc_timer_init(void)
{
arch_gettimeoffset = ioc_timer_gettimeoffset;
WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
ioctime_init();
setup_irq(IRQ_TIMER0, &ioc_timer_irq);
}

91
arch/arm/mach-sa1100/assabet.c
View File

@ -519,6 +519,29 @@ static const struct gpio_keys_platform_data assabet_keys_pdata = {
.rep = 0,
};
static struct gpiod_lookup_table assabet_uart1_gpio_table = {
.dev_id = "sa11x0-uart.1",
.table = {
GPIO_LOOKUP("assabet", 16, "dtr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("assabet", 17, "rts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("assabet", 25, "dcd", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("assabet", 26, "cts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("assabet", 27, "dsr", GPIO_ACTIVE_LOW),
{ },
},
};
static struct gpiod_lookup_table assabet_uart3_gpio_table = {
.dev_id = "sa11x0-uart.3",
.table = {
GPIO_LOOKUP("assabet", 28, "cts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("assabet", 29, "dsr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("assabet", 30, "dcd", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("assabet", 31, "rng", GPIO_ACTIVE_LOW),
{ },
},
};
static void __init assabet_init(void)
{
/*
@ -565,7 +588,10 @@ static void __init assabet_init(void)
neponset_resources, ARRAY_SIZE(neponset_resources));
#endif
} else {
gpiod_add_lookup_table(&assabet_uart1_gpio_table);
gpiod_add_lookup_table(&assabet_uart3_gpio_table);
gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table);
sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata,
assabet_cf_vcc_consumers,
ARRAY_SIZE(assabet_cf_vcc_consumers),
@ -655,74 +681,13 @@ static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
if (port->mapbase == _Ser1UTCR0) {
if (state)
ASSABET_BCR_clear(ASSABET_BCR_RS232EN |
ASSABET_BCR_COM_RTS |
ASSABET_BCR_COM_DTR);
ASSABET_BCR_clear(ASSABET_BCR_RS232EN);
else
ASSABET_BCR_set(ASSABET_BCR_RS232EN |
ASSABET_BCR_COM_RTS |
ASSABET_BCR_COM_DTR);
ASSABET_BCR_set(ASSABET_BCR_RS232EN);
}
}
/*
* Assabet uses COM_RTS and COM_DTR for both UART1 (com port)
* and UART3 (radio module). We only handle them for UART1 here.
*/
static void assabet_set_mctrl(struct uart_port *port, u_int mctrl)
{
if (port->mapbase == _Ser1UTCR0) {
u_int set = 0, clear = 0;
if (mctrl & TIOCM_RTS)
clear |= ASSABET_BCR_COM_RTS;
else
set |= ASSABET_BCR_COM_RTS;
if (mctrl & TIOCM_DTR)
clear |= ASSABET_BCR_COM_DTR;
else
set |= ASSABET_BCR_COM_DTR;
ASSABET_BCR_clear(clear);
ASSABET_BCR_set(set);
}
}
static u_int assabet_get_mctrl(struct uart_port *port)
{
u_int ret = 0;
u_int bsr = ASSABET_BSR;
/* need 2 reads to read current value */
bsr = ASSABET_BSR;
if (port->mapbase == _Ser1UTCR0) {
if (bsr & ASSABET_BSR_COM_DCD)
ret |= TIOCM_CD;
if (bsr & ASSABET_BSR_COM_CTS)
ret |= TIOCM_CTS;
if (bsr & ASSABET_BSR_COM_DSR)
ret |= TIOCM_DSR;
} else if (port->mapbase == _Ser3UTCR0) {
if (bsr & ASSABET_BSR_RAD_DCD)
ret |= TIOCM_CD;
if (bsr & ASSABET_BSR_RAD_CTS)
ret |= TIOCM_CTS;
if (bsr & ASSABET_BSR_RAD_DSR)
ret |= TIOCM_DSR;
if (bsr & ASSABET_BSR_RAD_RI)
ret |= TIOCM_RI;
} else {
ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
}
return ret;
}
static struct sa1100_port_fns assabet_port_fns __initdata = {
.set_mctrl = assabet_set_mctrl,
.get_mctrl = assabet_get_mctrl,
.pm = assabet_uart_pm,
};

2
arch/arm/mach-sa1100/badge4.c
View File

@ -311,8 +311,6 @@ badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
}
static struct sa1100_port_fns badge4_port_fns __initdata = {
//.get_mctrl = badge4_get_mctrl,
//.set_mctrl = badge4_set_mctrl,
.pm = badge4_uart_pm,
};

228
arch/arm/mach-sa1100/clock.c
View File

@ -2,176 +2,144 @@
/*
* linux/arch/arm/mach-sa1100/clock.c
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <mach/generic.h>
struct clkops {
void (*enable)(struct clk *);
void (*disable)(struct clk *);
unsigned long (*get_rate)(struct clk *);
static const char * const clk_tucr_parents[] = {
"clk32768", "clk3686400",
};
struct clk {
const struct clkops *ops;
unsigned int enabled;
};
static DEFINE_SPINLOCK(tucr_lock);
#define DEFINE_CLK(_name, _ops) \
struct clk clk_##_name = { \
.ops = _ops, \
}
static DEFINE_SPINLOCK(clocks_lock);
/* Dummy clk routine to build generic kernel parts that may be using them */
long clk_round_rate(struct clk *clk, unsigned long rate)
static int clk_gpio27_enable(struct clk_hw *hw)
{
return clk_get_rate(clk);
}
EXPORT_SYMBOL(clk_round_rate);
unsigned long flags;
int clk_set_rate(struct clk *clk, unsigned long rate)
{
return 0;
}
EXPORT_SYMBOL(clk_set_rate);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
return 0;
}
EXPORT_SYMBOL(clk_set_parent);
struct clk *clk_get_parent(struct clk *clk)
{
return NULL;
}
EXPORT_SYMBOL(clk_get_parent);
static void clk_gpio27_enable(struct clk *clk)
{
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
* (SA-1110 Developer's Manual, section 9.1.2.1)
*/
local_irq_save(flags);
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_3_6864MHz;
local_irq_restore(flags);
return 0;
}
static void clk_gpio27_disable(struct clk *clk)
static void clk_gpio27_disable(struct clk_hw *hw)
{
TUCR = 0;
unsigned long flags;
local_irq_save(flags);
GPDR &= ~GPIO_32_768kHz;
GAFR &= ~GPIO_32_768kHz;
local_irq_restore(flags);
}
static void clk_cpu_enable(struct clk *clk)
{
}
static const struct clk_ops clk_gpio27_ops = {
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
};
static void clk_cpu_disable(struct clk *clk)
{
}
static const char * const clk_gpio27_parents[] = {
"tucr-mux",
};
static unsigned long clk_cpu_get_rate(struct clk *clk)
static const struct clk_init_data clk_gpio27_init_data __initconst = {
.name = "gpio27",
.ops = &clk_gpio27_ops,
.parent_names = clk_gpio27_parents,
.num_parents = ARRAY_SIZE(clk_gpio27_parents),
};
/*
* Derived from the table 8-1 in the SA1110 manual, the MPLL appears to
* multiply its input rate by 4 x (4 + PPCR). This calculation gives
* the exact rate. The figures given in the table are the rates rounded
* to 100kHz. Stick with sa11x0_getspeed() for the time being.
*/
static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw,
unsigned long prate)
{
return sa11x0_getspeed(0) * 1000;
}
int clk_enable(struct clk *clk)
{
unsigned long flags;
if (clk) {
spin_lock_irqsave(&clocks_lock, flags);
if (clk->enabled++ == 0)
clk->ops->enable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
}
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
unsigned long flags;
if (clk) {
WARN_ON(clk->enabled == 0);
spin_lock_irqsave(&clocks_lock, flags);
if (--clk->enabled == 0)
clk->ops->disable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
}
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
if (clk && clk->ops && clk->ops->get_rate)
return clk->ops->get_rate(clk);
return 0;
}
EXPORT_SYMBOL(clk_get_rate);
const struct clkops clk_gpio27_ops = {
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
static const struct clk_ops clk_mpll_ops = {
.recalc_rate = clk_mpll_recalc_rate,
};
const struct clkops clk_cpu_ops = {
.enable = clk_cpu_enable,
.disable = clk_cpu_disable,
.get_rate = clk_cpu_get_rate,
static const char * const clk_mpll_parents[] = {
"clk3686400",
};
static DEFINE_CLK(gpio27, &clk_gpio27_ops);
static DEFINE_CLK(cpu, &clk_cpu_ops);
static unsigned long clk_36864_get_rate(struct clk *clk)
{
return 3686400;
}
static struct clkops clk_36864_ops = {
.enable = clk_cpu_enable,
.disable = clk_cpu_disable,
.get_rate = clk_36864_get_rate,
};
static DEFINE_CLK(36864, &clk_36864_ops);
static struct clk_lookup sa11xx_clkregs[] = {
CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27),
CLKDEV_INIT("sa1100-rtc", NULL, NULL),
CLKDEV_INIT("sa11x0-fb", NULL, &clk_cpu),
CLKDEV_INIT("sa11x0-pcmcia", NULL, &clk_cpu),
CLKDEV_INIT("sa11x0-pcmcia.0", NULL, &clk_cpu),
CLKDEV_INIT("sa11x0-pcmcia.1", NULL, &clk_cpu),
/* sa1111 names devices using internal offsets, PCMCIA is at 0x1800 */
CLKDEV_INIT("1800", NULL, &clk_cpu),
CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
static const struct clk_init_data clk_mpll_init_data __initconst = {
.name = "mpll",
.ops = &clk_mpll_ops,
.parent_names = clk_mpll_parents,
.num_parents = ARRAY_SIZE(clk_mpll_parents),
.flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL,
};
int __init sa11xx_clk_init(void)
{
clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
struct clk_hw *hw;
int ret;
hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768);
if (IS_ERR(hw))
return PTR_ERR(hw);
clk_hw_register_clkdev(hw, NULL, "sa1100-rtc");
hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400);
if (IS_ERR(hw))
return PTR_ERR(hw);
clk_hw_register_clkdev(hw, "OSTIMER0", NULL);
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw)
return -ENOMEM;
hw->init = &clk_mpll_init_data;
ret = clk_hw_register(NULL, hw);
if (ret) {
kfree(hw);
return ret;
}
clk_hw_register_clkdev(hw, NULL, "sa11x0-fb");
clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia");
clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0");
clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1");
clk_hw_register_clkdev(hw, NULL, "1800");
hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents,
ARRAY_SIZE(clk_tucr_parents), 0,
(void __iomem *)&TUCR, FShft(TUCR_TSEL),
FAlnMsk(TUCR_TSEL), 0, &tucr_lock);
clk_set_rate(hw->clk, 3686400);
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw)
return -ENOMEM;
hw->init = &clk_gpio27_init_data;
ret = clk_hw_register(NULL, hw);
if (ret) {
kfree(hw);
return ret;
}
clk_hw_register_clkdev(hw, NULL, "sa1111.0");
return 0;
}

64
arch/arm/mach-sa1100/h3xxx.c
View File

@ -83,57 +83,6 @@ static struct resource h3xxx_flash_resource =
/*
* H3xxx uart support
*/
static struct gpio h3xxx_uart_gpio[] = {
{ H3XXX_GPIO_COM_DCD, GPIOF_IN, "COM DCD" },
{ H3XXX_GPIO_COM_CTS, GPIOF_IN, "COM CTS" },
{ H3XXX_GPIO_COM_RTS, GPIOF_OUT_INIT_LOW, "COM RTS" },
};
static bool h3xxx_uart_request_gpios(void)
{
static bool h3xxx_uart_gpio_ok;
int rc;
if (h3xxx_uart_gpio_ok)
return true;
rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio));
if (rc)
pr_err("h3xxx_uart_request_gpios: error %d\n", rc);
else
h3xxx_uart_gpio_ok = true;
return h3xxx_uart_gpio_ok;
}
static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
{
if (port->mapbase == _Ser3UTCR0) {
if (!h3xxx_uart_request_gpios())
return;
gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
}
}
static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
{
u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
if (port->mapbase == _Ser3UTCR0) {
if (!h3xxx_uart_request_gpios())
return ret;
/*
* DCD and CTS bits are inverted in GPLR by RS232 transceiver
*/
if (gpio_get_value(H3XXX_GPIO_COM_DCD))
ret &= ~TIOCM_CD;
if (gpio_get_value(H3XXX_GPIO_COM_CTS))
ret &= ~TIOCM_CTS;
}
return ret;
}
static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
if (port->mapbase == _Ser3UTCR0) {
@ -166,12 +115,20 @@ static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
}
static struct sa1100_port_fns h3xxx_port_fns __initdata = {
.set_mctrl = h3xxx_uart_set_mctrl,
.get_mctrl = h3xxx_uart_get_mctrl,
.pm = h3xxx_uart_pm,
.set_wake = h3xxx_uart_set_wake,
};
static struct gpiod_lookup_table h3xxx_uart3_gpio_table = {
.dev_id = "sa11x0-uart.3",
.table = {
GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_DCD, "dcd", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_CTS, "cts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_RTS, "rts", GPIO_ACTIVE_LOW),
{ },
},
};
/*
* EGPIO
*/
@ -279,6 +236,7 @@ static struct gpiod_lookup_table h3xxx_pcmcia_gpio_table = {
void __init h3xxx_mach_init(void)
{
gpiod_add_lookup_table(&h3xxx_pcmcia_gpio_table);
gpiod_add_lookup_table(&h3xxx_uart3_gpio_table);
sa1100_register_uart_fns(&h3xxx_port_fns);
sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));

48
arch/arm/mach-sa1100/hackkit.c
View File

@ -45,8 +45,6 @@
/* init funcs */
static void __init hackkit_map_io(void);
static u_int hackkit_get_mctrl(struct uart_port *port);
static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl);
static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
/**********************************************************************
@ -67,8 +65,6 @@ static struct map_desc hackkit_io_desc[] __initdata = {
};
static struct sa1100_port_fns hackkit_port_fns __initdata = {
.set_mctrl = hackkit_set_mctrl,
.get_mctrl = hackkit_get_mctrl,
.pm = hackkit_uart_pm,
};
@ -101,50 +97,6 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
/* TODO: switch on/off uart in powersave mode */
}
/*
* Note! this can be called from IRQ context.
* FIXME: No modem ctrl lines yet.
*/
static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl)
{
#if 0
if (port->mapbase == _Ser1UTCR0) {
u_int set = 0, clear = 0;
if (mctrl & TIOCM_RTS)
set |= PT_CTRL2_RS1_RTS;
else
clear |= PT_CTRL2_RS1_RTS;
if (mctrl & TIOCM_DTR)
set |= PT_CTRL2_RS1_DTR;
else
clear |= PT_CTRL2_RS1_DTR;
PTCTRL2_clear(clear);
PTCTRL2_set(set);
}
#endif
}
static u_int hackkit_get_mctrl(struct uart_port *port)
{
u_int ret = 0;
#if 0
u_int irqsr = PT_IRQSR;
/* need 2 reads to read current value */
irqsr = PT_IRQSR;
/* TODO: check IRQ source register for modem/com
status lines and set them correctly. */
#endif
ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
return ret;
}
static struct mtd_partition hackkit_partitions[] = {
{
.name = "BLOB",

109
arch/arm/mach-sa1100/neponset.c
View File

@ -11,7 +11,6 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_data/sa11x0-serial.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/serial_core.h>
@ -49,23 +48,8 @@
#define IRR_SA1111 (1 << 2)
#define NCR_NGPIO 7
#define MDM_CTL0_RTS1 (1 << 0)
#define MDM_CTL0_DTR1 (1 << 1)
#define MDM_CTL0_RTS2 (1 << 2)
#define MDM_CTL0_DTR2 (1 << 3)
#define MDM_CTL0_NGPIO 4
#define MDM_CTL1_CTS1 (1 << 0)
#define MDM_CTL1_DSR1 (1 << 1)
#define MDM_CTL1_DCD1 (1 << 2)
#define MDM_CTL1_CTS2 (1 << 3)
#define MDM_CTL1_DSR2 (1 << 4)
#define MDM_CTL1_DCD2 (1 << 5)
#define MDM_CTL1_NGPIO 6
#define AUD_SEL_1341 (1 << 0)
#define AUD_MUTE_1341 (1 << 1)
#define AUD_NGPIO 2
extern void sa1110_mb_disable(void);
@ -97,6 +81,30 @@ struct neponset_drvdata {
struct gpio_chip *gpio[4];
};
static struct gpiod_lookup_table neponset_uart1_gpio_table = {
.dev_id = "sa11x0-uart.1",
.table = {
GPIO_LOOKUP("neponset-mdm-ctl0", 2, "rts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl0", 3, "dtr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 3, "cts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 4, "dsr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 5, "dcd", GPIO_ACTIVE_LOW),
{ },
},
};
static struct gpiod_lookup_table neponset_uart3_gpio_table = {
.dev_id = "sa11x0-uart.3",
.table = {
GPIO_LOOKUP("neponset-mdm-ctl0", 0, "rts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl0", 1, "dtr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 0, "cts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 1, "dsr", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("neponset-mdm-ctl1", 2, "dcd", GPIO_ACTIVE_LOW),
{ },
},
};
static struct gpiod_lookup_table neponset_pcmcia_table = {
.dev_id = "1800",
.table = {
@ -124,69 +132,6 @@ void neponset_ncr_frob(unsigned int mask, unsigned int val)
}
EXPORT_SYMBOL(neponset_ncr_frob);
static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
{
struct neponset_drvdata *n = nep;
unsigned long mask, val = 0;
if (!n)
return;
if (port->mapbase == _Ser1UTCR0) {
mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2;
if (!(mctrl & TIOCM_RTS))
val |= MDM_CTL0_RTS2;
if (!(mctrl & TIOCM_DTR))
val |= MDM_CTL0_DTR2;
} else if (port->mapbase == _Ser3UTCR0) {
mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1;
if (!(mctrl & TIOCM_RTS))
val |= MDM_CTL0_RTS1;
if (!(mctrl & TIOCM_DTR))
val |= MDM_CTL0_DTR1;
}
n->gpio[1]->set_multiple(n->gpio[1], &mask, &val);
}
static u_int neponset_get_mctrl(struct uart_port *port)
{
void __iomem *base = nep->base;
u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
u_int mdm_ctl1;
if (!base)
return ret;
mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
if (port->mapbase == _Ser1UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD2)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS2)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR2)
ret &= ~TIOCM_DSR;
} else if (port->mapbase == _Ser3UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD1)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS1)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR1)
ret &= ~TIOCM_DSR;
}
return ret;
}
static struct sa1100_port_fns neponset_port_fns = {
.set_mctrl = neponset_set_mctrl,
.get_mctrl = neponset_get_mctrl,
};
/*
* Install handler for Neponset IRQ. Note that we have to loop here
* since the ETHERNET and USAR IRQs are level based, and we need to
@ -388,6 +333,8 @@ static int neponset_probe(struct platform_device *dev)
d->base + AUD_CTL, AUD_NGPIO, false,
neponset_aud_names);
gpiod_add_lookup_table(&neponset_uart1_gpio_table);
gpiod_add_lookup_table(&neponset_uart3_gpio_table);
gpiod_add_lookup_table(&neponset_pcmcia_table);
/*
@ -402,8 +349,6 @@ static int neponset_probe(struct platform_device *dev)
d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
nep = d;
sa1100_register_uart_fns(&neponset_port_fns);
/* Ensure that the memory bus request/grant signals are setup */
sa1110_mb_disable();
@ -442,6 +387,8 @@ static int neponset_remove(struct platform_device *dev)
platform_device_unregister(d->smc91x);
gpiod_remove_lookup_table(&neponset_pcmcia_table);
gpiod_remove_lookup_table(&neponset_uart3_gpio_table);
gpiod_remove_lookup_table(&neponset_uart1_gpio_table);
irq_set_chained_handler(irq, NULL);
irq_free_descs(d->irq_base, NEP_IRQ_NR);

17
arch/arm/mach-shmobile/setup-rcar-gen2.c
View File

@ -17,6 +17,7 @@
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/psci.h>
#include <asm/mach/arch.h>
#include <asm/secure_cntvoff.h>
#include "common.h"
@ -60,9 +61,24 @@ static unsigned int __init get_extal_freq(void)
void __init rcar_gen2_timer_init(void)
{
bool need_update = true;
void __iomem *base;
u32 freq;
/*
* If PSCI is available then most likely we are running on PSCI-enabled
* U-Boot which, we assume, has already taken care of resetting CNTVOFF
* and updating counter module before switching to non-secure mode
* and we don't need to.
*/
#ifdef CONFIG_ARM_PSCI_FW
if (psci_ops.cpu_on)
need_update = false;
#endif
if (need_update == false)
goto skip_update;
secure_cntvoff_init();
if (of_machine_is_compatible("renesas,r8a7745") ||
@ -102,6 +118,7 @@ void __init rcar_gen2_timer_init(void)
iounmap(base);
skip_update:
of_clk_init(NULL);
timer_probe();
}

3
arch/arm/mach-stm32/Kconfig
View File

@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig ARCH_STM32
bool "STMicroelectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
bool "STMicroelectronics STM32 family"
depends on ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
select ARM_GIC if ARCH_MULTI_V7

3
arch/arm/mach-tango/Makefile
View File

@ -1,7 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
obj-y += setup.o smc.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_SUSPEND) += pm.o

2
arch/arm/mach-tango/smc.S
View File

@ -1,6 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/linkage.h>
.arch armv7-a
.arch_extension sec
ENTRY(tango_smc)
push {lr}
mov ip, r1

164
arch/arm/mach-versatile/versatile_dt.c
View File

@ -16,8 +16,6 @@
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/mmci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -34,14 +32,12 @@
*/
#define VERSATILE_SYS_PCICTL_OFFSET 0x44
#define VERSATILE_SYS_MCI_OFFSET 0x48
#define VERSATILE_SYS_CLCD_OFFSET 0x50
/*
* VERSATILE peripheral addresses
*/
#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */
#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */
#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */
#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */
#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000)
@ -83,158 +79,6 @@ static struct mmci_platform_data mmc1_plat_data = {
.status = mmc_status,
};
/*
* CLCD support.
*/
#define SYS_CLCD_MODE_MASK (3 << 0)
#define SYS_CLCD_MODE_888 (0 << 0)
#define SYS_CLCD_MODE_5551 (1 << 0)
#define SYS_CLCD_MODE_565_RLSB (2 << 0)
#define SYS_CLCD_MODE_565_BLSB (3 << 0)
#define SYS_CLCD_NLCDIOON (1 << 2)
#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
#define SYS_CLCD_ID_MASK (0x1f << 8)
#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
#define SYS_CLCD_ID_VGA (0x1f << 8)
static bool is_sanyo_2_5_lcd;
/*
* Disable all display connectors on the interface module.
*/
static void versatile_clcd_disable(struct clcd_fb *fb)
{
void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
/*
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
*/
if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
unsigned long ctrl;
ctrl = readl(versatile_ib2_ctrl);
ctrl &= ~0x01;
writel(ctrl, versatile_ib2_ctrl);
}
}
/*
* Enable the relevant connector on the interface module.
*/
static void versatile_clcd_enable(struct clcd_fb *fb)
{
struct fb_var_screeninfo *var = &fb->fb.var;
void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
val &= ~SYS_CLCD_MODE_MASK;
switch (var->green.length) {
case 5:
val |= SYS_CLCD_MODE_5551;
break;
case 6:
if (var->red.offset == 0)
val |= SYS_CLCD_MODE_565_RLSB;
else
val |= SYS_CLCD_MODE_565_BLSB;
break;
case 8:
val |= SYS_CLCD_MODE_888;
break;
}
/*
* Set the MUX
*/
writel(val, sys_clcd);
/*
* And now enable the PSUs
*/
val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
/*
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
*/
if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
unsigned long ctrl;
ctrl = readl(versatile_ib2_ctrl);
ctrl |= 0x01;
writel(ctrl, versatile_ib2_ctrl);
}
}
/*
* Detect which LCD panel is connected, and return the appropriate
* clcd_panel structure. Note: we do not have any information on
* the required timings for the 8.4in panel, so we presently assume
* VGA timings.
*/
static int versatile_clcd_setup(struct clcd_fb *fb)
{
void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
const char *panel_name;
u32 val;
is_sanyo_2_5_lcd = false;
val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
if (val == SYS_CLCD_ID_SANYO_3_8)
panel_name = "Sanyo TM38QV67A02A";
else if (val == SYS_CLCD_ID_SANYO_2_5) {
panel_name = "Sanyo QVGA Portrait";
is_sanyo_2_5_lcd = true;
} else if (val == SYS_CLCD_ID_EPSON_2_2)
panel_name = "Epson L2F50113T00";
else if (val == SYS_CLCD_ID_VGA)
panel_name = "VGA";
else {
printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
val);
panel_name = "VGA";
}
fb->panel = versatile_clcd_get_panel(panel_name);
if (!fb->panel)
return -EINVAL;
return versatile_clcd_setup_dma(fb, SZ_1M);
}
static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
{
clcdfb_decode(fb, regs);
/* Always clear BGR for RGB565: we do the routing externally */
if (fb->fb.var.green.length == 6)
regs->cntl &= ~CNTL_BGR;
}
static struct clcd_board clcd_plat_data = {
.name = "Versatile",
.caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
.check = clcdfb_check,
.decode = versatile_clcd_decode,
.disable = versatile_clcd_disable,
.enable = versatile_clcd_enable,
.setup = versatile_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
};
/*
* Lookup table for attaching a specific name and platform_data pointer to
* devices as they get created by of_platform_populate(). Ideally this table
@ -244,7 +88,6 @@ static struct clcd_board clcd_plat_data = {
struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data),
OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
{}
};
@ -299,12 +142,12 @@ static void __init versatile_dt_pci_init(void)
* driver had it so we will keep it.
*/
writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
return;
goto out_put_node;
}
newprop = kzalloc(sizeof(*newprop), GFP_KERNEL);
if (!newprop)
return;
goto out_put_node;
newprop->name = kstrdup("status", GFP_KERNEL);
newprop->value = kstrdup("disabled", GFP_KERNEL);
@ -312,6 +155,9 @@ static void __init versatile_dt_pci_init(void)
of_update_property(np, newprop);
pr_info("Not plugged into PCI backplane!\n");
out_put_node:
of_node_put(np);
}
static void __init versatile_dt_init(void)

3
arch/arm64/Kconfig.platforms
View File

@ -66,8 +66,11 @@ config ARCH_BITMAIN
config ARCH_BRCMSTB
bool "Broadcom Set-Top-Box SoCs"
select ARCH_HAS_RESET_CONTROLLER
select BCM7038_L1_IRQ
select BRCMSTB_L2_IRQ
select GENERIC_IRQ_CHIP
select PINCTRL
help
This enables support for Broadcom's ARMv8 Set Top Box SoCs

4
drivers/soc/renesas/Kconfig
View File

@ -57,14 +57,16 @@ config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select PM
select PM_GENERIC_DOMAINS
select SYS_SUPPORTS_SH_MTU2
select RENESAS_OSTM
select RENESAS_RZA1_IRQC
select SYS_SUPPORTS_SH_MTU2
config ARCH_R7S9210
bool "RZ/A2 (R7S9210)"
select PM
select PM_GENERIC_DOMAINS
select RENESAS_OSTM
select RENESAS_RZA1_IRQC
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"

1
drivers/soc/ti/pm33xx.c
View File

@ -178,6 +178,7 @@ static int am33xx_pm_suspend(suspend_state_t suspend_state)
suspend_wfi_flags);
suspend_wfi_flags &= ~WFI_FLAG_RTC_ONLY;
dev_info(pm33xx_dev, "Entering RTC Only mode with DDR in self-refresh\n");
if (!ret) {
clk_restore_context();

1
drivers/tty/serial/Kconfig
View File

@ -497,6 +497,7 @@ config SERIAL_SA1100
bool "SA1100 serial port support"
depends on ARCH_SA1100
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
help
If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
can enable its onboard serial port by enabling this option.

46
drivers/tty/serial/sa1100.c
View File

@ -28,6 +28,8 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "serial_mctrl_gpio.h"
/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_SA1100_MAJOR 204
#define MINOR_START 5
@ -77,6 +79,7 @@ struct sa1100_port {
struct uart_port port;
struct timer_list timer;
unsigned int old_status;
struct mctrl_gpios *gpios;
};
/*
@ -174,6 +177,8 @@ static void sa1100_enable_ms(struct uart_port *port)
container_of(port, struct sa1100_port, port);
mod_timer(&sport->timer, jiffies);
mctrl_gpio_enable_ms(sport->gpios);
}
static void
@ -322,11 +327,21 @@ static unsigned int sa1100_tx_empty(struct uart_port *port)
static unsigned int sa1100_get_mctrl(struct uart_port *port)
{
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
struct sa1100_port *sport =
container_of(port, struct sa1100_port, port);
int ret = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
mctrl_gpio_get(sport->gpios, &ret);
return ret;
}
static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
struct sa1100_port *sport =
container_of(port, struct sa1100_port, port);
mctrl_gpio_set(sport->gpios, mctrl);
}
/*
@ -842,6 +857,31 @@ static int sa1100_serial_resume(struct platform_device *dev)
return 0;
}
static int sa1100_serial_add_one_port(struct sa1100_port *sport, struct platform_device *dev)
{
sport->port.dev = &dev->dev;
// mctrl_gpio_init() requires that the GPIO driver supports interrupts,
// but we need to support GPIO drivers for hardware that has no such
// interrupts. Use mctrl_gpio_init_noauto() instead.
sport->gpios = mctrl_gpio_init_noauto(sport->port.dev, 0);
if (IS_ERR(sport->gpios)) {
int err = PTR_ERR(sport->gpios);
dev_err(sport->port.dev, "failed to get mctrl gpios: %d\n",
err);
if (err == -EPROBE_DEFER)
return err;
sport->gpios = NULL;
}
platform_set_drvdata(dev, sport);
return uart_add_one_port(&sa1100_reg, &sport->port);
}
static int sa1100_serial_probe(struct platform_device *dev)
{
struct resource *res = dev->resource;
@ -856,9 +896,7 @@ static int sa1100_serial_probe(struct platform_device *dev)
if (sa1100_ports[i].port.mapbase != res->start)
continue;
sa1100_ports[i].port.dev = &dev->dev;
uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port);
platform_set_drvdata(dev, &sa1100_ports[i]);
sa1100_serial_add_one_port(&sa1100_ports[i], dev);
break;
}
}

28
include/linux/platform_data/video-clcd-versatile.h
View File

@ -1,28 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef PLAT_CLCD_H
#define PLAT_CLCD_H
#ifdef CONFIG_PLAT_VERSATILE_CLCD
struct clcd_panel *versatile_clcd_get_panel(const char *);
int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long);
int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *);
void versatile_clcd_remove_dma(struct clcd_fb *);
#else
static inline struct clcd_panel *versatile_clcd_get_panel(const char *s)
{
return NULL;
}
static inline int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize)
{
return -ENODEV;
}
static inline int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vm)
{
return -ENODEV;
}
static inline void versatile_clcd_remove_dma(struct clcd_fb *fb)
{
}
#endif
#endif