Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-16 17:12:06 +00:00
Code Issues Packages Projects Releases Wiki Activity

mfd: max77686: Do not enforce (incorrect) interrupt trigger type

Browse Source 
Interrupt line can be configured on different hardware in different way,
even inverted.  Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.

The Maxim 77686 datasheet describes the interrupt line as active low
with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.

The interrupt line is shared between PMIC and RTC driver, so using level
sensitive interrupt is here especially important to avoid races.  With
an edge configuration in case if first PMIC signals interrupt followed
shortly after by the RTC, the interrupt might not be yet cleared/acked
thus the second one would not be noticed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602110445.33536-2-krzysztof.kozlowski@canonical.com
This commit is contained in:
Krzysztof Kozlowski 2021-06-02 13:04:43 +02:00 committed by Lee Jones
parent 6854a10526
commit 215e50b086
4 changed files with 5 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/devicetree/bindings/clock/maxim,max77686.txt
View File

@ -49,7 +49,7 @@ Example:
max77686: max77686@9 {
compatible = "maxim,max77686";
interrupt-parent = <&wakeup_eint>;
interrupts = <26 0>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
reg = <0x09>;
#clock-cells = <1>;
@ -74,7 +74,7 @@ Example:
max77802: max77802@9 {
compatible = "maxim,max77802";
interrupt-parent = <&wakeup_eint>;
interrupts = <26 0>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
reg = <0x09>;
#clock-cells = <1>;

2
Documentation/devicetree/bindings/mfd/max77686.txt
View File

@ -21,6 +21,6 @@ Example:
max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&wakeup_eint>;
interrupts = <26 0>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
reg = <0x09>;
};

2
Documentation/devicetree/bindings/regulator/max77686.txt
View File

@ -43,7 +43,7 @@ Example:
max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&wakeup_eint>;
interrupts = <26 IRQ_TYPE_NONE>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
reg = <0x09>;
voltage-regulators {

3
drivers/mfd/max77686.c
View File

@ -209,8 +209,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c)
ret = devm_regmap_add_irq_chip(&i2c->dev, max77686->regmap,
max77686->irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
IRQF_SHARED, 0, irq_chip,
IRQF_ONESHOT | IRQF_SHARED, 0, irq_chip,
&max77686->irq_data);
if (ret < 0) {
dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret);