soundwire: qcom: define hardcoded version magic numbers

Use a define instead of hard-coded register values for Soundwire
hardware version number, because it is a bit easier to read and allows
to drop explaining comment.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222144412.237832-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Krzysztof Kozlowski 2023-02-22 15:44:11 +01:00 committed by Vinod Koul
parent bd934f77ee
commit 208a03ee9d

View File

@ -28,6 +28,9 @@
#define SWRM_LINK_MANAGER_EE 0x018
#define SWRM_EE_CPU 1
#define SWRM_FRM_GEN_ENABLED BIT(0)
#define SWRM_VERSION_1_3_0 0x01030000
#define SWRM_VERSION_1_5_1 0x01050001
#define SWRM_VERSION_1_7_0 0x01070000
#define SWRM_COMP_HW_VERSION 0x00
#define SWRM_COMP_CFG_ADDR 0x04
#define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK BIT(1)
@ -351,8 +354,7 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data,
/* Its assumed that write is okay as we do not get any status back */
swrm->reg_write(swrm, SWRM_CMD_FIFO_WR_CMD, val);
/* version 1.3 or less */
if (swrm->version <= 0x01030000)
if (swrm->version <= SWRM_VERSION_1_3_0)
usleep_range(150, 155);
if (cmd_id == SWR_BROADCAST_CMD_ID) {
@ -695,7 +697,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK);
ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val);
if (ctrl->version >= 0x01070000) {
if (ctrl->version >= SWRM_VERSION_1_7_0) {
ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL,
SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU);
@ -704,8 +706,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
}
/* Configure number of retries of a read/write cmd */
if (ctrl->version >= 0x01050001) {
/* Only for versions >= 1.5.1 */
if (ctrl->version >= SWRM_VERSION_1_5_1) {
ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR,
SWRM_RD_WR_CMD_RETRIES |
SWRM_CONTINUE_EXEC_ON_CMD_IGNORE);
@ -1239,7 +1240,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode",
bp_mode, nports);
if (ret) {
if (ctrl->version <= 0x01030000)
if (ctrl->version <= SWRM_VERSION_1_3_0)
memset(bp_mode, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
else
return ret;
@ -1442,7 +1443,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
/* Clk stop is not supported on WSA Soundwire masters */
if (ctrl->version <= 0x01030000) {
if (ctrl->version <= SWRM_VERSION_1_3_0) {
ctrl->clock_stop_not_supported = true;
} else {
ctrl->reg_read(ctrl, SWRM_COMP_MASTER_ID, &val);
@ -1527,7 +1528,7 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev)
} else {
reset_control_reset(ctrl->audio_cgcr);
if (ctrl->version >= 0x01070000) {
if (ctrl->version >= SWRM_VERSION_1_7_0) {
ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL,
SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU);