USB fixes for 5.0-rc2

Here are some small USB driver fixes and quirk updates for 5.0-rc2.
 
 The majority here are some quirks for some storage devices to get them
 to work properly.  There's also a fix here to resolve the reported
 issues with some audio devices that say they are UAC3 compliant, but
 really are not.
 
 And a fix up for the MAINTAINERS file to remove a dead url.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsQMA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykM2wCgzC1E5NUpoCqPZHaYQ/0LNLm6SaEAoIbebWBo
 rl39FeUBmPJLTmKD0pFX
 =4K55
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes and quirk updates for 5.0-rc2.

  The majority here are some quirks for some storage devices to get them
  to work properly. There's also a fix here to resolve the reported
  issues with some audio devices that say they are UAC3 compliant, but
  really are not.

  And a fix up for the MAINTAINERS file to remove a dead url.

  All have been in linux-next with no reported issues"

* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: storage: Remove outdated URL from MAINTAINERS
  USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
  usbcore: Select only first configuration for non-UAC3 compliant devices
  USB: storage: add quirk for SMI SM3350
  USB: storage: don't insert sane sense for SPC3+ when bad sense specified
  usb: cdc-acm: send ZLP for Telit 3G Intel based modems
This commit is contained in:
Linus Torvalds 2019-01-14 05:45:28 +12:00
commit 1dd8a3f6c6
6 changed files with 33 additions and 7 deletions

View File

@ -15806,7 +15806,6 @@ M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
F: drivers/usb/storage/
USB MIDI DRIVER

View File

@ -1865,6 +1865,13 @@ static const struct usb_device_id acm_ids[] = {
.driver_info = IGNORE_DEVICE,
},
{ USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */
.driver_info = SEND_ZERO_PACKET,
},
{ USB_DEVICE(0x1bc7, 0x0023), /* Telit 3G ACM + ECM composition */
.driver_info = SEND_ZERO_PACKET,
},
/* control interfaces without any protocol set */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_PROTO_NONE) },

View File

@ -143,9 +143,12 @@ int usb_choose_configuration(struct usb_device *udev)
continue;
}
if (i > 0 && desc && is_audio(desc) && is_uac3_config(desc)) {
best = c;
break;
if (i > 0 && desc && is_audio(desc)) {
if (is_uac3_config(desc)) {
best = c;
break;
}
continue;
}
/* From the remaining configs, choose the first one whose

View File

@ -394,7 +394,8 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET },
/* Corsair K70 RGB */
{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT |
USB_QUIRK_DELAY_CTRL_MSG },
/* Corsair Strafe */
{ USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT |

View File

@ -235,8 +235,12 @@ static int slave_configure(struct scsi_device *sdev)
if (!(us->fflags & US_FL_NEEDS_CAP16))
sdev->try_rc_10_first = 1;
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
/*
* assume SPC3 or latter devices support sense size > 18
* unless US_FL_BAD_SENSE quirk is specified.
*/
if (sdev->scsi_level > SCSI_SPC_2 &&
!(us->fflags & US_FL_BAD_SENSE))
us->fflags |= US_FL_SANE_SENSE;
/*

View File

@ -1265,6 +1265,18 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
/*
* Reported by Icenowy Zheng <icenowy@aosc.io>
* The SMI SM3350 USB-UFS bridge controller will enter a wrong state
* that do not process read/write command if a long sense is requested,
* so force to use 18-byte sense.
*/
UNUSUAL_DEV( 0x090c, 0x3350, 0x0000, 0xffff,
"SMI",
"SM3350 UFS-to-USB-Mass-Storage bridge",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BAD_SENSE ),
/*
* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
* This card reader returns "Illegal Request, Logical Block Address