drm/i915: Fix DVO 2x clock enable on 830M

The spec says:
"For the correct operation of the muxed DVO pins (GDEVSELB/ I2Cdata,
GIRDBY/I2CClk) and (GFRAMEB/DVI_Data, GTRDYB/DVI_Clk): Bit 31
(DPLL VCO Enable) and Bit 30 (2X Clock Enable) must be set to “1” in
both the DPLL A Control Register (06014h-06017h) and DPLL B Control
Register (06018h-0601Bh)."

The pipe A and B force quirks take care of DPLL_VCO_ENABLE, so we
just need a bit of special care to handle DPLL_DVO_2X_MODE.

v2: Recompute num_dvo_pipes on the spot, use PIPE_A/PIPE_B instead
    of pipe/!pipe for the register offsets in disable (Daniel)
    Add a comment about the ordering in enable and another one
    about filtering out the DVO 2x bit in state readout

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Thomas Richter <richter@rus.uni-stuttgart.de> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Ville Syrjälä 2014-09-05 21:52:42 +03:00 committed by Daniel Vetter
parent 8337486a8f
commit 1c4e027461

View File

@ -1612,6 +1612,18 @@ static void chv_enable_pll(struct intel_crtc *crtc)
mutex_unlock(&dev_priv->dpio_lock);
}
static int intel_num_dvo_pipes(struct drm_device *dev)
{
struct intel_crtc *crtc;
int count = 0;
for_each_intel_crtc(dev, crtc)
count += crtc->active &&
intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO);
return count;
}
static void i9xx_enable_pll(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
@ -1628,7 +1640,18 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
if (IS_MOBILE(dev) && !IS_I830(dev))
assert_panel_unlocked(dev_priv, crtc->pipe);
I915_WRITE(reg, dpll);
/* Enable DVO 2x clock on both PLLs if necessary */
if (IS_I830(dev) && intel_num_dvo_pipes(dev) > 0) {
/*
* It appears to be important that we don't enable this
* for the current pipe before otherwise configuring the
* PLL. No idea how this should be handled if multiple
* DVO outputs are enabled simultaneosly.
*/
dpll |= DPLL_DVO_2X_MODE;
I915_WRITE(DPLL(!crtc->pipe),
I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
}
/* Wait for the clocks to stabilize. */
POSTING_READ(reg);
@ -1667,8 +1690,22 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
*
* Note! This is for pre-ILK only.
*/
static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
static void i9xx_disable_pll(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe = crtc->pipe;
/* Disable DVO 2x clock on both PLLs if necessary */
if (IS_I830(dev) &&
intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO) &&
intel_num_dvo_pipes(dev) == 1) {
I915_WRITE(DPLL(PIPE_B),
I915_READ(DPLL(PIPE_B)) & ~DPLL_DVO_2X_MODE);
I915_WRITE(DPLL(PIPE_A),
I915_READ(DPLL(PIPE_A)) & ~DPLL_DVO_2X_MODE);
}
/* Don't disable pipe or pipe PLLs if needed */
if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
@ -4941,7 +4978,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
else if (IS_VALLEYVIEW(dev))
vlv_disable_pll(dev_priv, pipe);
else
i9xx_disable_pll(dev_priv, pipe);
i9xx_disable_pll(intel_crtc);
}
if (!IS_GEN2(dev))
@ -5945,7 +5982,7 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
dpll |= PLL_P2_DIVIDE_BY_4;
}
if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
if (!IS_I830(dev) && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO))
dpll |= DPLL_DVO_2X_MODE;
if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
@ -6451,6 +6488,14 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
}
pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
if (!IS_VALLEYVIEW(dev)) {
/*
* DPLL_DVO_2X_MODE must be enabled for both DPLLs
* on 830. Filter it out here so that we don't
* report errors due to that.
*/
if (IS_I830(dev))
pipe_config->dpll_hw_state.dpll &= ~DPLL_DVO_2X_MODE;
pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
} else {