Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-12 07:01:57 +00:00
Code Issues Packages Projects Releases Wiki Activity

ide/Kconfig: add IDEDISK_MULTI_MODE text adapted from hdparm manual page

Browse Source 
Add IDEDISK_MULTI_MODE text adapted from hdparm manual page.

Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Matti Linnanvuori 2007-11-05 21:42:26 +01:00 committed by Bartlomiej Zolnierkiewicz
parent 699b052ad2
commit 127ba28965
1 changed files with 15 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/ide/Kconfig
View File

@ -152,9 +152,22 @@ config BLK_DEV_IDEDISK
If unsure, say Y.
config IDEDISK_MULTI_MODE
bool "Use multi-mode by default"
bool "Use multiple sector mode for Programmed Input/Output by default"
help
If you get this error, try to say Y here:
This setting is irrelevant for most IDE disks, with direct memory
access, to which multiple sector mode does not apply. Multiple sector
mode is a feature of most modern IDE hard drives, permitting the
transfer of multiple sectors per Programmed Input/Output interrupt,
rather than the usual one sector per interrupt. When this feature is
enabled, it can reduce operating system overhead for disk Programmed
Input/Output. On some systems, it also can increase the data
throughput of Programmed Input/Output. Some drives, however, seemed
to run slower with multiple sector mode enabled. Some drives claimed
to support multiple sector mode, but lost data at some settings.
Under rare circumstances, such failures could result in massive
filesystem corruption.
If you get the following error, try to say Y here:
hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hda: set_multmode: error=0x04 { DriveStatusError }