diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt index ea22dfe485be..97258f1a1505 100644 --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt @@ -6,8 +6,7 @@ timer counters. Required properties: - compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. - reg : Offset and length of the register set for the device. -- interrupts : Contain the timer interrupt with flags for - falling edge. +- interrupts : Contain the timer interrupt of timer 0. - clocks : phandle of timer reference clock (usually a 25 MHz clock). Example: diff --git a/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt deleted file mode 100644 index 9499bc8ee9e3..000000000000 --- a/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt +++ /dev/null @@ -1,18 +0,0 @@ -ST-Ericsson U300 apptimer - -Required properties: - -- compatible : should be "stericsson,u300-apptimer" -- reg : Specifies base physical address and size of the registers. -- interrupts : A list of 4 interrupts; one for each subtimer. These - are, in order: OS (operating system), DD (device driver) both - adopted for EPOC/Symbian with two specific IRQs for these tasks, - then GP1 and GP2, which are general-purpose timers. - -Example: - -timer { - compatible = "stericsson,u300-apptimer"; - reg = <0xc0014000 0x1000>; - interrupts = <24 25 26 27>; -}; diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 14c7c4712478..d184000eb09e 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -197,12 +197,6 @@ config CLPS711X_TIMER help Enables support for the Cirrus Logic PS711 timer. -config ATLAS7_TIMER - bool "Atlas7 timer driver" if COMPILE_TEST - select CLKSRC_MMIO - help - Enables support for the Atlas7 timer. - config MXS_TIMER bool "MXS timer driver" if COMPILE_TEST select CLKSRC_MMIO @@ -210,19 +204,6 @@ config MXS_TIMER help Enables support for the MXS timer. -config PRIMA2_TIMER - bool "Prima2 timer driver" if COMPILE_TEST - select CLKSRC_MMIO - help - Enables support for the Prima2 timer. - -config U300_TIMER - bool "U300 timer driver" if COMPILE_TEST - depends on ARM - select CLKSRC_MMIO - help - Enables support for the U300 timer. - config NSPIRE_TIMER bool "NSpire timer driver" if COMPILE_TEST select CLKSRC_MMIO @@ -242,15 +223,6 @@ config INTEGRATOR_AP_TIMER help Enables support for the Integrator-AP timer. -config CLKSRC_EFM32 - bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32 - depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST) - select CLKSRC_MMIO - default ARCH_EFM32 - help - Support to use the timers of EFM32 SoCs as clock source and clock - event device. - config CLKSRC_LPC32XX bool "Clocksource for LPC32XX" if COMPILE_TEST depends on HAS_IOMEM @@ -567,14 +539,6 @@ config CLKSRC_MIPS_GIC select CLOCKSOURCE_WATCHDOG select TIMER_OF -config CLKSRC_TANGO_XTAL - bool "Clocksource for Tango SoC" if COMPILE_TEST - depends on ARM - select TIMER_OF - select CLKSRC_MMIO - help - This enables the clocksource for Tango SoC. - config CLKSRC_PXA bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST depends on HAS_IOMEM diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 3c75cbbf8533..c17ee32a7151 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -30,11 +30,8 @@ obj-$(CONFIG_ARMADA_370_XP_TIMER) += timer-armada-370-xp.o obj-$(CONFIG_ORION_TIMER) += timer-orion.o obj-$(CONFIG_BCM2835_TIMER) += bcm2835_timer.o obj-$(CONFIG_CLPS711X_TIMER) += clps711x-timer.o -obj-$(CONFIG_ATLAS7_TIMER) += timer-atlas7.o obj-$(CONFIG_MXS_TIMER) += mxs_timer.o obj-$(CONFIG_CLKSRC_PXA) += timer-pxa.o -obj-$(CONFIG_PRIMA2_TIMER) += timer-prima2.o -obj-$(CONFIG_U300_TIMER) += timer-u300.o obj-$(CONFIG_SUN4I_TIMER) += timer-sun4i.o obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o obj-$(CONFIG_MESON6_TIMER) += timer-meson6.o @@ -43,7 +40,6 @@ obj-$(CONFIG_VT8500_TIMER) += timer-vt8500.o obj-$(CONFIG_NSPIRE_TIMER) += timer-zevio.o obj-$(CONFIG_BCM_KONA_TIMER) += bcm_kona_timer.o obj-$(CONFIG_CADENCE_TTC_TIMER) += timer-cadence-ttc.o -obj-$(CONFIG_CLKSRC_EFM32) += timer-efm32.o obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o obj-$(CONFIG_CLKSRC_STM32_LP) += timer-stm32-lp.o obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o @@ -73,7 +69,6 @@ obj-$(CONFIG_KEYSTONE_TIMER) += timer-keystone.o obj-$(CONFIG_INTEGRATOR_AP_TIMER) += timer-integrator-ap.o obj-$(CONFIG_CLKSRC_VERSATILE) += timer-versatile.o obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o -obj-$(CONFIG_CLKSRC_TANGO_XTAL) += timer-tango-xtal.o obj-$(CONFIG_CLKSRC_IMX_GPT) += timer-imx-gpt.o obj-$(CONFIG_CLKSRC_IMX_TPM) += timer-imx-tpm.o obj-$(CONFIG_TIMER_IMX_SYS_CTR) += timer-imx-sysctr.o diff --git a/drivers/clocksource/timer-atlas7.c b/drivers/clocksource/timer-atlas7.c deleted file mode 100644 index c21c91c2bc56..000000000000 --- a/drivers/clocksource/timer-atlas7.c +++ /dev/null @@ -1,281 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * System timer for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000 -#define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004 -#define SIRFSOC_TIMER_MATCH_0 0x0018 -#define SIRFSOC_TIMER_MATCH_1 0x001c -#define SIRFSOC_TIMER_COUNTER_0 0x0048 -#define SIRFSOC_TIMER_COUNTER_1 0x004c -#define SIRFSOC_TIMER_INTR_STATUS 0x0060 -#define SIRFSOC_TIMER_WATCHDOG_EN 0x0064 -#define SIRFSOC_TIMER_64COUNTER_CTRL 0x0068 -#define SIRFSOC_TIMER_64COUNTER_LO 0x006c -#define SIRFSOC_TIMER_64COUNTER_HI 0x0070 -#define SIRFSOC_TIMER_64COUNTER_LOAD_LO 0x0074 -#define SIRFSOC_TIMER_64COUNTER_LOAD_HI 0x0078 -#define SIRFSOC_TIMER_64COUNTER_RLATCHED_LO 0x007c -#define SIRFSOC_TIMER_64COUNTER_RLATCHED_HI 0x0080 - -#define SIRFSOC_TIMER_REG_CNT 6 - -static unsigned long atlas7_timer_rate; - -static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { - SIRFSOC_TIMER_WATCHDOG_EN, - SIRFSOC_TIMER_32COUNTER_0_CTRL, - SIRFSOC_TIMER_32COUNTER_1_CTRL, - SIRFSOC_TIMER_64COUNTER_CTRL, - SIRFSOC_TIMER_64COUNTER_RLATCHED_LO, - SIRFSOC_TIMER_64COUNTER_RLATCHED_HI, -}; - -static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT]; - -static void __iomem *sirfsoc_timer_base; - -/* disable count and interrupt */ -static inline void sirfsoc_timer_count_disable(int idx) -{ - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) & ~0x7, - sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx); -} - -/* enable count and interrupt */ -static inline void sirfsoc_timer_count_enable(int idx) -{ - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x3, - sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx); -} - -/* timer interrupt handler */ -static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *ce = dev_id; - int cpu = smp_processor_id(); - - /* clear timer interrupt */ - writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - - if (clockevent_state_oneshot(ce)) - sirfsoc_timer_count_disable(cpu); - - ce->event_handler(ce); - - return IRQ_HANDLED; -} - -/* read 64-bit timer counter */ -static u64 sirfsoc_timer_read(struct clocksource *cs) -{ - u64 cycles; - - writel_relaxed((readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | - BIT(0)) & ~BIT(1), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - - cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_HI); - cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_RLATCHED_LO); - - return cycles; -} - -static int sirfsoc_timer_set_next_event(unsigned long delta, - struct clock_event_device *ce) -{ - int cpu = smp_processor_id(); - - /* disable timer first, then modify the related registers */ - sirfsoc_timer_count_disable(cpu); - - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0 + - 4 * cpu); - writel_relaxed(delta, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0 + - 4 * cpu); - - /* enable the tick */ - sirfsoc_timer_count_enable(cpu); - - return 0; -} - -/* Oneshot is enabled in set_next_event */ -static int sirfsoc_timer_shutdown(struct clock_event_device *evt) -{ - sirfsoc_timer_count_disable(smp_processor_id()); - return 0; -} - -static void sirfsoc_clocksource_suspend(struct clocksource *cs) -{ - int i; - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) - sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); -} - -static void sirfsoc_clocksource_resume(struct clocksource *cs) -{ - int i; - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) - writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], - sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO); - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], - sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI); - - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | - BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); -} - -static struct clock_event_device __percpu *sirfsoc_clockevent; - -static struct clocksource sirfsoc_clocksource = { - .name = "sirfsoc_clocksource", - .rating = 200, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .read = sirfsoc_timer_read, - .suspend = sirfsoc_clocksource_suspend, - .resume = sirfsoc_clocksource_resume, -}; - -static unsigned int sirfsoc_timer_irq, sirfsoc_timer1_irq; - -static int sirfsoc_local_timer_starting_cpu(unsigned int cpu) -{ - struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu); - unsigned int irq; - const char *name; - - if (cpu == 0) { - irq = sirfsoc_timer_irq; - name = "sirfsoc_timer0"; - } else { - irq = sirfsoc_timer1_irq; - name = "sirfsoc_timer1"; - } - - ce->irq = irq; - ce->name = "local_timer"; - ce->features = CLOCK_EVT_FEAT_ONESHOT; - ce->rating = 200; - ce->set_state_shutdown = sirfsoc_timer_shutdown; - ce->set_state_oneshot = sirfsoc_timer_shutdown; - ce->tick_resume = sirfsoc_timer_shutdown; - ce->set_next_event = sirfsoc_timer_set_next_event; - clockevents_calc_mult_shift(ce, atlas7_timer_rate, 60); - ce->max_delta_ns = clockevent_delta2ns(-2, ce); - ce->max_delta_ticks = (unsigned long)-2; - ce->min_delta_ns = clockevent_delta2ns(2, ce); - ce->min_delta_ticks = 2; - ce->cpumask = cpumask_of(cpu); - - BUG_ON(request_irq(ce->irq, sirfsoc_timer_interrupt, - IRQF_TIMER | IRQF_NOBALANCING, name, ce)); - irq_force_affinity(ce->irq, cpumask_of(cpu)); - - clockevents_register_device(ce); - return 0; -} - -static int sirfsoc_local_timer_dying_cpu(unsigned int cpu) -{ - struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu); - - sirfsoc_timer_count_disable(1); - - if (cpu == 0) - free_irq(sirfsoc_timer_irq, ce); - else - free_irq(sirfsoc_timer1_irq, ce); - return 0; -} - -static int __init sirfsoc_clockevent_init(void) -{ - sirfsoc_clockevent = alloc_percpu(struct clock_event_device); - BUG_ON(!sirfsoc_clockevent); - - /* Install and invoke hotplug callbacks */ - return cpuhp_setup_state(CPUHP_AP_MARCO_TIMER_STARTING, - "clockevents/marco:starting", - sirfsoc_local_timer_starting_cpu, - sirfsoc_local_timer_dying_cpu); -} - -/* initialize the kernel jiffy timer source */ -static int __init sirfsoc_atlas7_timer_init(struct device_node *np) -{ - struct clk *clk; - - clk = of_clk_get(np, 0); - BUG_ON(IS_ERR(clk)); - - BUG_ON(clk_prepare_enable(clk)); - - atlas7_timer_rate = clk_get_rate(clk); - - /* timer dividers: 0, not divided */ - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL); - - /* Initialize timer counters to 0 */ - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_HI); - writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL) | - BIT(1) | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_1); - - /* Clear all interrupts */ - writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS); - - BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, atlas7_timer_rate)); - - return sirfsoc_clockevent_init(); -} - -static int __init sirfsoc_of_timer_init(struct device_node *np) -{ - sirfsoc_timer_base = of_iomap(np, 0); - if (!sirfsoc_timer_base) { - pr_err("unable to map timer cpu registers\n"); - return -ENXIO; - } - - sirfsoc_timer_irq = irq_of_parse_and_map(np, 0); - if (!sirfsoc_timer_irq) { - pr_err("No irq passed for timer0 via DT\n"); - return -EINVAL; - } - - sirfsoc_timer1_irq = irq_of_parse_and_map(np, 1); - if (!sirfsoc_timer1_irq) { - pr_err("No irq passed for timer1 via DT\n"); - return -EINVAL; - } - - return sirfsoc_atlas7_timer_init(np); -} -TIMER_OF_DECLARE(sirfsoc_atlas7_timer, "sirf,atlas7-tick", sirfsoc_of_timer_init); diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c index bb4eee31ae08..9996c0542520 100644 --- a/drivers/clocksource/timer-davinci.c +++ b/drivers/clocksource/timer-davinci.c @@ -7,6 +7,8 @@ * (with tiny parts adopted from code by Kevin Hilman ) */ +#define pr_fmt(fmt) "%s: " fmt, __func__ + #include #include #include @@ -17,9 +19,6 @@ #include -#undef pr_fmt -#define pr_fmt(fmt) "%s: " fmt, __func__ - #define DAVINCI_TIMER_REG_TIM12 0x10 #define DAVINCI_TIMER_REG_TIM34 0x14 #define DAVINCI_TIMER_REG_PRD12 0x18 diff --git a/drivers/clocksource/timer-efm32.c b/drivers/clocksource/timer-efm32.c deleted file mode 100644 index 441a4b916841..000000000000 --- a/drivers/clocksource/timer-efm32.c +++ /dev/null @@ -1,278 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2013 Pengutronix - * Uwe Kleine-Koenig - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define TIMERn_CTRL 0x00 -#define TIMERn_CTRL_PRESC(val) (((val) & 0xf) << 24) -#define TIMERn_CTRL_PRESC_1024 TIMERn_CTRL_PRESC(10) -#define TIMERn_CTRL_CLKSEL(val) (((val) & 0x3) << 16) -#define TIMERn_CTRL_CLKSEL_PRESCHFPERCLK TIMERn_CTRL_CLKSEL(0) -#define TIMERn_CTRL_OSMEN 0x00000010 -#define TIMERn_CTRL_MODE(val) (((val) & 0x3) << 0) -#define TIMERn_CTRL_MODE_UP TIMERn_CTRL_MODE(0) -#define TIMERn_CTRL_MODE_DOWN TIMERn_CTRL_MODE(1) - -#define TIMERn_CMD 0x04 -#define TIMERn_CMD_START 0x00000001 -#define TIMERn_CMD_STOP 0x00000002 - -#define TIMERn_IEN 0x0c -#define TIMERn_IF 0x10 -#define TIMERn_IFS 0x14 -#define TIMERn_IFC 0x18 -#define TIMERn_IRQ_UF 0x00000002 - -#define TIMERn_TOP 0x1c -#define TIMERn_CNT 0x24 - -struct efm32_clock_event_ddata { - struct clock_event_device evtdev; - void __iomem *base; - unsigned periodic_top; -}; - -static int efm32_clock_event_shutdown(struct clock_event_device *evtdev) -{ - struct efm32_clock_event_ddata *ddata = - container_of(evtdev, struct efm32_clock_event_ddata, evtdev); - - writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD); - return 0; -} - -static int efm32_clock_event_set_oneshot(struct clock_event_device *evtdev) -{ - struct efm32_clock_event_ddata *ddata = - container_of(evtdev, struct efm32_clock_event_ddata, evtdev); - - writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD); - writel_relaxed(TIMERn_CTRL_PRESC_1024 | - TIMERn_CTRL_CLKSEL_PRESCHFPERCLK | - TIMERn_CTRL_OSMEN | - TIMERn_CTRL_MODE_DOWN, - ddata->base + TIMERn_CTRL); - return 0; -} - -static int efm32_clock_event_set_periodic(struct clock_event_device *evtdev) -{ - struct efm32_clock_event_ddata *ddata = - container_of(evtdev, struct efm32_clock_event_ddata, evtdev); - - writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD); - writel_relaxed(ddata->periodic_top, ddata->base + TIMERn_TOP); - writel_relaxed(TIMERn_CTRL_PRESC_1024 | - TIMERn_CTRL_CLKSEL_PRESCHFPERCLK | - TIMERn_CTRL_MODE_DOWN, - ddata->base + TIMERn_CTRL); - writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD); - return 0; -} - -static int efm32_clock_event_set_next_event(unsigned long evt, - struct clock_event_device *evtdev) -{ - struct efm32_clock_event_ddata *ddata = - container_of(evtdev, struct efm32_clock_event_ddata, evtdev); - - writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD); - writel_relaxed(evt, ddata->base + TIMERn_CNT); - writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD); - - return 0; -} - -static irqreturn_t efm32_clock_event_handler(int irq, void *dev_id) -{ - struct efm32_clock_event_ddata *ddata = dev_id; - - writel_relaxed(TIMERn_IRQ_UF, ddata->base + TIMERn_IFC); - - ddata->evtdev.event_handler(&ddata->evtdev); - - return IRQ_HANDLED; -} - -static struct efm32_clock_event_ddata clock_event_ddata = { - .evtdev = { - .name = "efm32 clockevent", - .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, - .set_state_shutdown = efm32_clock_event_shutdown, - .set_state_periodic = efm32_clock_event_set_periodic, - .set_state_oneshot = efm32_clock_event_set_oneshot, - .set_next_event = efm32_clock_event_set_next_event, - .rating = 200, - }, -}; - -static int __init efm32_clocksource_init(struct device_node *np) -{ - struct clk *clk; - void __iomem *base; - unsigned long rate; - int ret; - - clk = of_clk_get(np, 0); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - pr_err("failed to get clock for clocksource (%d)\n", ret); - goto err_clk_get; - } - - ret = clk_prepare_enable(clk); - if (ret) { - pr_err("failed to enable timer clock for clocksource (%d)\n", - ret); - goto err_clk_enable; - } - rate = clk_get_rate(clk); - - base = of_iomap(np, 0); - if (!base) { - ret = -EADDRNOTAVAIL; - pr_err("failed to map registers for clocksource\n"); - goto err_iomap; - } - - writel_relaxed(TIMERn_CTRL_PRESC_1024 | - TIMERn_CTRL_CLKSEL_PRESCHFPERCLK | - TIMERn_CTRL_MODE_UP, base + TIMERn_CTRL); - writel_relaxed(TIMERn_CMD_START, base + TIMERn_CMD); - - ret = clocksource_mmio_init(base + TIMERn_CNT, "efm32 timer", - DIV_ROUND_CLOSEST(rate, 1024), 200, 16, - clocksource_mmio_readl_up); - if (ret) { - pr_err("failed to init clocksource (%d)\n", ret); - goto err_clocksource_init; - } - - return 0; - -err_clocksource_init: - - iounmap(base); -err_iomap: - - clk_disable_unprepare(clk); -err_clk_enable: - - clk_put(clk); -err_clk_get: - - return ret; -} - -static int __init efm32_clockevent_init(struct device_node *np) -{ - struct clk *clk; - void __iomem *base; - unsigned long rate; - int irq; - int ret; - - clk = of_clk_get(np, 0); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - pr_err("failed to get clock for clockevent (%d)\n", ret); - goto err_clk_get; - } - - ret = clk_prepare_enable(clk); - if (ret) { - pr_err("failed to enable timer clock for clockevent (%d)\n", - ret); - goto err_clk_enable; - } - rate = clk_get_rate(clk); - - base = of_iomap(np, 0); - if (!base) { - ret = -EADDRNOTAVAIL; - pr_err("failed to map registers for clockevent\n"); - goto err_iomap; - } - - irq = irq_of_parse_and_map(np, 0); - if (!irq) { - ret = -ENOENT; - pr_err("failed to get irq for clockevent\n"); - goto err_get_irq; - } - - writel_relaxed(TIMERn_IRQ_UF, base + TIMERn_IEN); - - clock_event_ddata.base = base; - clock_event_ddata.periodic_top = DIV_ROUND_CLOSEST(rate, 1024 * HZ); - - clockevents_config_and_register(&clock_event_ddata.evtdev, - DIV_ROUND_CLOSEST(rate, 1024), - 0xf, 0xffff); - - ret = request_irq(irq, efm32_clock_event_handler, IRQF_TIMER, - "efm32 clockevent", &clock_event_ddata); - if (ret) { - pr_err("Failed setup irq\n"); - goto err_setup_irq; - } - - return 0; - -err_setup_irq: -err_get_irq: - - iounmap(base); -err_iomap: - - clk_disable_unprepare(clk); -err_clk_enable: - - clk_put(clk); -err_clk_get: - - return ret; -} - -/* - * This function asserts that we have exactly one clocksource and one - * clock_event_device in the end. - */ -static int __init efm32_timer_init(struct device_node *np) -{ - static int has_clocksource, has_clockevent; - int ret = 0; - - if (!has_clocksource) { - ret = efm32_clocksource_init(np); - if (!ret) { - has_clocksource = 1; - return 0; - } - } - - if (!has_clockevent) { - ret = efm32_clockevent_init(np); - if (!ret) { - has_clockevent = 1; - return 0; - } - } - - return ret; -} -TIMER_OF_DECLARE(efm32compat, "efm32,timer", efm32_timer_init); -TIMER_OF_DECLARE(efm32, "energymicro,efm32-timer", efm32_timer_init); diff --git a/drivers/clocksource/timer-microchip-pit64b.c b/drivers/clocksource/timer-microchip-pit64b.c index 59e11ca8ee73..ab623b25a47b 100644 --- a/drivers/clocksource/timer-microchip-pit64b.c +++ b/drivers/clocksource/timer-microchip-pit64b.c @@ -71,10 +71,24 @@ struct mchp_pit64b_clkevt { struct clock_event_device clkevt; }; -#define to_mchp_pit64b_timer(x) \ +#define clkevt_to_mchp_pit64b_timer(x) \ ((struct mchp_pit64b_timer *)container_of(x,\ struct mchp_pit64b_clkevt, clkevt)) +/** + * mchp_pit64b_clksrc - PIT64B clocksource data structure + * @timer: PIT64B timer + * @clksrc: clocksource + */ +struct mchp_pit64b_clksrc { + struct mchp_pit64b_timer timer; + struct clocksource clksrc; +}; + +#define clksrc_to_mchp_pit64b_timer(x) \ + ((struct mchp_pit64b_timer *)container_of(x,\ + struct mchp_pit64b_clksrc, clksrc)) + /* Base address for clocksource timer. */ static void __iomem *mchp_pit64b_cs_base; /* Default cycles for clockevent timer. */ @@ -116,6 +130,36 @@ static inline void mchp_pit64b_reset(struct mchp_pit64b_timer *timer, writel_relaxed(MCHP_PIT64B_CR_START, timer->base + MCHP_PIT64B_CR); } +static void mchp_pit64b_suspend(struct mchp_pit64b_timer *timer) +{ + writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR); + if (timer->mode & MCHP_PIT64B_MR_SGCLK) + clk_disable_unprepare(timer->gclk); + clk_disable_unprepare(timer->pclk); +} + +static void mchp_pit64b_resume(struct mchp_pit64b_timer *timer) +{ + clk_prepare_enable(timer->pclk); + if (timer->mode & MCHP_PIT64B_MR_SGCLK) + clk_prepare_enable(timer->gclk); +} + +static void mchp_pit64b_clksrc_suspend(struct clocksource *cs) +{ + struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs); + + mchp_pit64b_suspend(timer); +} + +static void mchp_pit64b_clksrc_resume(struct clocksource *cs) +{ + struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs); + + mchp_pit64b_resume(timer); + mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0); +} + static u64 mchp_pit64b_clksrc_read(struct clocksource *cs) { return mchp_pit64b_cnt_read(mchp_pit64b_cs_base); @@ -128,7 +172,7 @@ static u64 mchp_pit64b_sched_read_clk(void) static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev) { - struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); + struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR); @@ -137,7 +181,7 @@ static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev) static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev) { - struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); + struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT, MCHP_PIT64B_IER_PERIOD); @@ -148,7 +192,7 @@ static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev) static int mchp_pit64b_clkevt_set_next_event(unsigned long evt, struct clock_event_device *cedev) { - struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); + struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT, MCHP_PIT64B_IER_PERIOD); @@ -158,21 +202,16 @@ static int mchp_pit64b_clkevt_set_next_event(unsigned long evt, static void mchp_pit64b_clkevt_suspend(struct clock_event_device *cedev) { - struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); + struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); - writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR); - if (timer->mode & MCHP_PIT64B_MR_SGCLK) - clk_disable_unprepare(timer->gclk); - clk_disable_unprepare(timer->pclk); + mchp_pit64b_suspend(timer); } static void mchp_pit64b_clkevt_resume(struct clock_event_device *cedev) { - struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev); + struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev); - clk_prepare_enable(timer->pclk); - if (timer->mode & MCHP_PIT64B_MR_SGCLK) - clk_prepare_enable(timer->gclk); + mchp_pit64b_resume(timer); } static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id) @@ -296,20 +335,37 @@ done: static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer, u32 clk_rate) { + struct mchp_pit64b_clksrc *cs; int ret; + cs = kzalloc(sizeof(*cs), GFP_KERNEL); + if (!cs) + return -ENOMEM; + mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0); mchp_pit64b_cs_base = timer->base; - ret = clocksource_mmio_init(timer->base, MCHP_PIT64B_NAME, clk_rate, - 210, 64, mchp_pit64b_clksrc_read); + cs->timer.base = timer->base; + cs->timer.pclk = timer->pclk; + cs->timer.gclk = timer->gclk; + cs->timer.mode = timer->mode; + cs->clksrc.name = MCHP_PIT64B_NAME; + cs->clksrc.mask = CLOCKSOURCE_MASK(64); + cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS; + cs->clksrc.rating = 210; + cs->clksrc.read = mchp_pit64b_clksrc_read; + cs->clksrc.suspend = mchp_pit64b_clksrc_suspend; + cs->clksrc.resume = mchp_pit64b_clksrc_resume; + + ret = clocksource_register_hz(&cs->clksrc, clk_rate); if (ret) { pr_debug("clksrc: Failed to register PIT64B clocksource!\n"); /* Stop timer. */ writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR); + kfree(cs); return ret; } diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c deleted file mode 100644 index c5d469342a9d..000000000000 --- a/drivers/clocksource/timer-prima2.c +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * System timer for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define PRIMA2_CLOCK_FREQ 1000000 - -#define SIRFSOC_TIMER_COUNTER_LO 0x0000 -#define SIRFSOC_TIMER_COUNTER_HI 0x0004 -#define SIRFSOC_TIMER_MATCH_0 0x0008 -#define SIRFSOC_TIMER_MATCH_1 0x000C -#define SIRFSOC_TIMER_MATCH_2 0x0010 -#define SIRFSOC_TIMER_MATCH_3 0x0014 -#define SIRFSOC_TIMER_MATCH_4 0x0018 -#define SIRFSOC_TIMER_MATCH_5 0x001C -#define SIRFSOC_TIMER_STATUS 0x0020 -#define SIRFSOC_TIMER_INT_EN 0x0024 -#define SIRFSOC_TIMER_WATCHDOG_EN 0x0028 -#define SIRFSOC_TIMER_DIV 0x002C -#define SIRFSOC_TIMER_LATCH 0x0030 -#define SIRFSOC_TIMER_LATCHED_LO 0x0034 -#define SIRFSOC_TIMER_LATCHED_HI 0x0038 - -#define SIRFSOC_TIMER_WDT_INDEX 5 - -#define SIRFSOC_TIMER_LATCH_BIT BIT(0) - -#define SIRFSOC_TIMER_REG_CNT 11 - -static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { - SIRFSOC_TIMER_MATCH_0, SIRFSOC_TIMER_MATCH_1, SIRFSOC_TIMER_MATCH_2, - SIRFSOC_TIMER_MATCH_3, SIRFSOC_TIMER_MATCH_4, SIRFSOC_TIMER_MATCH_5, - SIRFSOC_TIMER_INT_EN, SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_DIV, - SIRFSOC_TIMER_LATCHED_LO, SIRFSOC_TIMER_LATCHED_HI, -}; - -static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT]; - -static void __iomem *sirfsoc_timer_base; - -/* timer0 interrupt handler */ -static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *ce = dev_id; - - WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & - BIT(0))); - - /* clear timer0 interrupt */ - writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); - - ce->event_handler(ce); - - return IRQ_HANDLED; -} - -/* read 64-bit timer counter */ -static u64 notrace sirfsoc_timer_read(struct clocksource *cs) -{ - u64 cycles; - - /* latch the 64-bit timer counter */ - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, - sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI); - cycles = (cycles << 32) | - readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); - - return cycles; -} - -static int sirfsoc_timer_set_next_event(unsigned long delta, - struct clock_event_device *ce) -{ - unsigned long now, next; - - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, - sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); - next = now + delta; - writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0); - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, - sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); - - return next - now > delta ? -ETIME : 0; -} - -static int sirfsoc_timer_shutdown(struct clock_event_device *evt) -{ - u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - - writel_relaxed(val & ~BIT(0), - sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - return 0; -} - -static int sirfsoc_timer_set_oneshot(struct clock_event_device *evt) -{ - u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - - writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); - return 0; -} - -static void sirfsoc_clocksource_suspend(struct clocksource *cs) -{ - int i; - - writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, - sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) - sirfsoc_timer_reg_val[i] = - readl_relaxed(sirfsoc_timer_base + - sirfsoc_timer_reg_list[i]); -} - -static void sirfsoc_clocksource_resume(struct clocksource *cs) -{ - int i; - - for (i = 0; i < SIRFSOC_TIMER_REG_CNT - 2; i++) - writel_relaxed(sirfsoc_timer_reg_val[i], - sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); - - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 2], - sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT - 1], - sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); -} - -static struct clock_event_device sirfsoc_clockevent = { - .name = "sirfsoc_clockevent", - .rating = 200, - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_state_shutdown = sirfsoc_timer_shutdown, - .set_state_oneshot = sirfsoc_timer_set_oneshot, - .set_next_event = sirfsoc_timer_set_next_event, -}; - -static struct clocksource sirfsoc_clocksource = { - .name = "sirfsoc_clocksource", - .rating = 200, - .mask = CLOCKSOURCE_MASK(64), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .read = sirfsoc_timer_read, - .suspend = sirfsoc_clocksource_suspend, - .resume = sirfsoc_clocksource_resume, -}; - -/* Overwrite weak default sched_clock with more precise one */ -static u64 notrace sirfsoc_read_sched_clock(void) -{ - return sirfsoc_timer_read(NULL); -} - -static void __init sirfsoc_clockevent_init(void) -{ - sirfsoc_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ, - 2, -2); -} - -/* initialize the kernel jiffy timer source */ -static int __init sirfsoc_prima2_timer_init(struct device_node *np) -{ - unsigned long rate; - unsigned int irq; - struct clk *clk; - int ret; - - clk = of_clk_get(np, 0); - if (IS_ERR(clk)) { - pr_err("Failed to get clock\n"); - return PTR_ERR(clk); - } - - ret = clk_prepare_enable(clk); - if (ret) { - pr_err("Failed to enable clock\n"); - return ret; - } - - rate = clk_get_rate(clk); - - if (rate < PRIMA2_CLOCK_FREQ || rate % PRIMA2_CLOCK_FREQ) { - pr_err("Invalid clock rate\n"); - return -EINVAL; - } - - sirfsoc_timer_base = of_iomap(np, 0); - if (!sirfsoc_timer_base) { - pr_err("unable to map timer cpu registers\n"); - return -ENXIO; - } - - irq = irq_of_parse_and_map(np, 0); - - writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1, - sirfsoc_timer_base + SIRFSOC_TIMER_DIV); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); - writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); - writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); - - ret = clocksource_register_hz(&sirfsoc_clocksource, PRIMA2_CLOCK_FREQ); - if (ret) { - pr_err("Failed to register clocksource\n"); - return ret; - } - - sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ); - - ret = request_irq(irq, sirfsoc_timer_interrupt, IRQF_TIMER, - "sirfsoc_timer0", &sirfsoc_clockevent); - if (ret) { - pr_err("Failed to setup irq\n"); - return ret; - } - - sirfsoc_clockevent_init(); - - return 0; -} -TIMER_OF_DECLARE(sirfsoc_prima2_timer, - "sirf,prima2-tick", sirfsoc_prima2_timer_init); diff --git a/drivers/clocksource/timer-tango-xtal.c b/drivers/clocksource/timer-tango-xtal.c deleted file mode 100644 index 3f94e454ef99..000000000000 --- a/drivers/clocksource/timer-tango-xtal.c +++ /dev/null @@ -1,57 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include -#include -#include -#include -#include -#include - -static void __iomem *xtal_in_cnt; -static struct delay_timer delay_timer; - -static unsigned long notrace read_xtal_counter(void) -{ - return readl_relaxed(xtal_in_cnt); -} - -static u64 notrace read_sched_clock(void) -{ - return read_xtal_counter(); -} - -static int __init tango_clocksource_init(struct device_node *np) -{ - struct clk *clk; - int xtal_freq, ret; - - xtal_in_cnt = of_iomap(np, 0); - if (xtal_in_cnt == NULL) { - pr_err("%pOF: invalid address\n", np); - return -ENXIO; - } - - clk = of_clk_get(np, 0); - if (IS_ERR(clk)) { - pr_err("%pOF: invalid clock\n", np); - return PTR_ERR(clk); - } - - xtal_freq = clk_get_rate(clk); - delay_timer.freq = xtal_freq; - delay_timer.read_current_timer = read_xtal_counter; - - ret = clocksource_mmio_init(xtal_in_cnt, "tango-xtal", xtal_freq, 350, - 32, clocksource_mmio_readl_up); - if (ret) { - pr_err("%pOF: registration failed\n", np); - return ret; - } - - sched_clock_register(read_sched_clock, 32, xtal_freq); - register_current_timer_delay(&delay_timer); - - return 0; -} - -TIMER_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init); diff --git a/drivers/clocksource/timer-u300.c b/drivers/clocksource/timer-u300.c deleted file mode 100644 index 37cba8dfd45f..000000000000 --- a/drivers/clocksource/timer-u300.c +++ /dev/null @@ -1,457 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2007-2009 ST-Ericsson AB - * Timer COH 901 328, runs the OS timer interrupt. - * Author: Linus Walleij - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Generic stuff */ -#include -#include - -/* - * APP side special timer registers - * This timer contains four timers which can fire an interrupt each. - * OS (operating system) timer @ 32768 Hz - * DD (device driver) timer @ 1 kHz - * GP1 (general purpose 1) timer @ 1MHz - * GP2 (general purpose 2) timer @ 1MHz - */ - -/* Reset OS Timer 32bit (-/W) */ -#define U300_TIMER_APP_ROST (0x0000) -#define U300_TIMER_APP_ROST_TIMER_RESET (0x00000000) -/* Enable OS Timer 32bit (-/W) */ -#define U300_TIMER_APP_EOST (0x0004) -#define U300_TIMER_APP_EOST_TIMER_ENABLE (0x00000000) -/* Disable OS Timer 32bit (-/W) */ -#define U300_TIMER_APP_DOST (0x0008) -#define U300_TIMER_APP_DOST_TIMER_DISABLE (0x00000000) -/* OS Timer Mode Register 32bit (-/W) */ -#define U300_TIMER_APP_SOSTM (0x000c) -#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT (0x00000001) -/* OS Timer Status Register 32bit (R/-) */ -#define U300_TIMER_APP_OSTS (0x0010) -#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK (0x0000000F) -#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE (0x00000001) -#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE (0x00000002) -#define U300_TIMER_APP_OSTS_ENABLE_IND (0x00000010) -#define U300_TIMER_APP_OSTS_MODE_MASK (0x00000020) -#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT (0x00000020) -#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND (0x00000040) -#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND (0x00000080) -/* OS Timer Current Count Register 32bit (R/-) */ -#define U300_TIMER_APP_OSTCC (0x0014) -/* OS Timer Terminal Count Register 32bit (R/W) */ -#define U300_TIMER_APP_OSTTC (0x0018) -/* OS Timer Interrupt Enable Register 32bit (-/W) */ -#define U300_TIMER_APP_OSTIE (0x001c) -#define U300_TIMER_APP_OSTIE_IRQ_DISABLE (0x00000000) -#define U300_TIMER_APP_OSTIE_IRQ_ENABLE (0x00000001) -/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */ -#define U300_TIMER_APP_OSTIA (0x0020) -#define U300_TIMER_APP_OSTIA_IRQ_ACK (0x00000080) - -/* Reset DD Timer 32bit (-/W) */ -#define U300_TIMER_APP_RDDT (0x0040) -#define U300_TIMER_APP_RDDT_TIMER_RESET (0x00000000) -/* Enable DD Timer 32bit (-/W) */ -#define U300_TIMER_APP_EDDT (0x0044) -#define U300_TIMER_APP_EDDT_TIMER_ENABLE (0x00000000) -/* Disable DD Timer 32bit (-/W) */ -#define U300_TIMER_APP_DDDT (0x0048) -#define U300_TIMER_APP_DDDT_TIMER_DISABLE (0x00000000) -/* DD Timer Mode Register 32bit (-/W) */ -#define U300_TIMER_APP_SDDTM (0x004c) -#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT (0x00000001) -/* DD Timer Status Register 32bit (R/-) */ -#define U300_TIMER_APP_DDTS (0x0050) -#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK (0x0000000F) -#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE (0x00000001) -#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE (0x00000002) -#define U300_TIMER_APP_DDTS_ENABLE_IND (0x00000010) -#define U300_TIMER_APP_DDTS_MODE_MASK (0x00000020) -#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT (0x00000020) -#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND (0x00000040) -#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND (0x00000080) -/* DD Timer Current Count Register 32bit (R/-) */ -#define U300_TIMER_APP_DDTCC (0x0054) -/* DD Timer Terminal Count Register 32bit (R/W) */ -#define U300_TIMER_APP_DDTTC (0x0058) -/* DD Timer Interrupt Enable Register 32bit (-/W) */ -#define U300_TIMER_APP_DDTIE (0x005c) -#define U300_TIMER_APP_DDTIE_IRQ_DISABLE (0x00000000) -#define U300_TIMER_APP_DDTIE_IRQ_ENABLE (0x00000001) -/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */ -#define U300_TIMER_APP_DDTIA (0x0060) -#define U300_TIMER_APP_DDTIA_IRQ_ACK (0x00000080) - -/* Reset GP1 Timer 32bit (-/W) */ -#define U300_TIMER_APP_RGPT1 (0x0080) -#define U300_TIMER_APP_RGPT1_TIMER_RESET (0x00000000) -/* Enable GP1 Timer 32bit (-/W) */ -#define U300_TIMER_APP_EGPT1 (0x0084) -#define U300_TIMER_APP_EGPT1_TIMER_ENABLE (0x00000000) -/* Disable GP1 Timer 32bit (-/W) */ -#define U300_TIMER_APP_DGPT1 (0x0088) -#define U300_TIMER_APP_DGPT1_TIMER_DISABLE (0x00000000) -/* GP1 Timer Mode Register 32bit (-/W) */ -#define U300_TIMER_APP_SGPT1M (0x008c) -#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT (0x00000001) -/* GP1 Timer Status Register 32bit (R/-) */ -#define U300_TIMER_APP_GPT1S (0x0090) -#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK (0x0000000F) -#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE (0x00000001) -#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE (0x00000002) -#define U300_TIMER_APP_GPT1S_ENABLE_IND (0x00000010) -#define U300_TIMER_APP_GPT1S_MODE_MASK (0x00000020) -#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT (0x00000020) -#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND (0x00000040) -#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND (0x00000080) -/* GP1 Timer Current Count Register 32bit (R/-) */ -#define U300_TIMER_APP_GPT1CC (0x0094) -/* GP1 Timer Terminal Count Register 32bit (R/W) */ -#define U300_TIMER_APP_GPT1TC (0x0098) -/* GP1 Timer Interrupt Enable Register 32bit (-/W) */ -#define U300_TIMER_APP_GPT1IE (0x009c) -#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE (0x00000000) -#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE (0x00000001) -/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */ -#define U300_TIMER_APP_GPT1IA (0x00a0) -#define U300_TIMER_APP_GPT1IA_IRQ_ACK (0x00000080) - -/* Reset GP2 Timer 32bit (-/W) */ -#define U300_TIMER_APP_RGPT2 (0x00c0) -#define U300_TIMER_APP_RGPT2_TIMER_RESET (0x00000000) -/* Enable GP2 Timer 32bit (-/W) */ -#define U300_TIMER_APP_EGPT2 (0x00c4) -#define U300_TIMER_APP_EGPT2_TIMER_ENABLE (0x00000000) -/* Disable GP2 Timer 32bit (-/W) */ -#define U300_TIMER_APP_DGPT2 (0x00c8) -#define U300_TIMER_APP_DGPT2_TIMER_DISABLE (0x00000000) -/* GP2 Timer Mode Register 32bit (-/W) */ -#define U300_TIMER_APP_SGPT2M (0x00cc) -#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT (0x00000001) -/* GP2 Timer Status Register 32bit (R/-) */ -#define U300_TIMER_APP_GPT2S (0x00d0) -#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK (0x0000000F) -#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE (0x00000001) -#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE (0x00000002) -#define U300_TIMER_APP_GPT2S_ENABLE_IND (0x00000010) -#define U300_TIMER_APP_GPT2S_MODE_MASK (0x00000020) -#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS (0x00000000) -#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT (0x00000020) -#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND (0x00000040) -#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND (0x00000080) -/* GP2 Timer Current Count Register 32bit (R/-) */ -#define U300_TIMER_APP_GPT2CC (0x00d4) -/* GP2 Timer Terminal Count Register 32bit (R/W) */ -#define U300_TIMER_APP_GPT2TC (0x00d8) -/* GP2 Timer Interrupt Enable Register 32bit (-/W) */ -#define U300_TIMER_APP_GPT2IE (0x00dc) -#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE (0x00000000) -#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE (0x00000001) -/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */ -#define U300_TIMER_APP_GPT2IA (0x00e0) -#define U300_TIMER_APP_GPT2IA_IRQ_ACK (0x00000080) - -/* Clock request control register - all four timers */ -#define U300_TIMER_APP_CRC (0x100) -#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001) - -static void __iomem *u300_timer_base; - -struct u300_clockevent_data { - struct clock_event_device cevd; - unsigned ticks_per_jiffy; -}; - -static int u300_shutdown(struct clock_event_device *evt) -{ - /* Disable interrupts on GP1 */ - writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - u300_timer_base + U300_TIMER_APP_GPT1IE); - /* Disable GP1 */ - writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - u300_timer_base + U300_TIMER_APP_DGPT1); - return 0; -} - -/* - * If we have oneshot timer active, the oneshot scheduling function - * u300_set_next_event() is called immediately after. - */ -static int u300_set_oneshot(struct clock_event_device *evt) -{ - /* Just return; here? */ - /* - * The actual event will be programmed by the next event hook, - * so we just set a dummy value somewhere at the end of the - * universe here. - */ - /* Disable interrupts on GPT1 */ - writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - u300_timer_base + U300_TIMER_APP_GPT1IE); - /* Disable GP1 while we're reprogramming it. */ - writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - u300_timer_base + U300_TIMER_APP_DGPT1); - /* - * Expire far in the future, u300_set_next_event() will be - * called soon... - */ - writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC); - /* We run one shot per tick here! */ - writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, - u300_timer_base + U300_TIMER_APP_SGPT1M); - /* Enable interrupts for this timer */ - writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - u300_timer_base + U300_TIMER_APP_GPT1IE); - /* Enable timer */ - writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - u300_timer_base + U300_TIMER_APP_EGPT1); - return 0; -} - -static int u300_set_periodic(struct clock_event_device *evt) -{ - struct u300_clockevent_data *cevdata = - container_of(evt, struct u300_clockevent_data, cevd); - - /* Disable interrupts on GPT1 */ - writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - u300_timer_base + U300_TIMER_APP_GPT1IE); - /* Disable GP1 while we're reprogramming it. */ - writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - u300_timer_base + U300_TIMER_APP_DGPT1); - /* - * Set the periodic mode to a certain number of ticks per - * jiffy. - */ - writel(cevdata->ticks_per_jiffy, - u300_timer_base + U300_TIMER_APP_GPT1TC); - /* - * Set continuous mode, so the timer keeps triggering - * interrupts. - */ - writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS, - u300_timer_base + U300_TIMER_APP_SGPT1M); - /* Enable timer interrupts */ - writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - u300_timer_base + U300_TIMER_APP_GPT1IE); - /* Then enable the OS timer again */ - writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - u300_timer_base + U300_TIMER_APP_EGPT1); - return 0; -} - -/* - * The app timer in one shot mode obviously has to be reprogrammed - * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace - * the interrupt disable + timer disable commands with a reset command, - * it will fail miserably. Apparently (and I found this the hard way) - * the timer is very sensitive to the instruction order, though you don't - * get that impression from the data sheet. - */ -static int u300_set_next_event(unsigned long cycles, - struct clock_event_device *evt) - -{ - /* Disable interrupts on GPT1 */ - writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE, - u300_timer_base + U300_TIMER_APP_GPT1IE); - /* Disable GP1 while we're reprogramming it. */ - writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE, - u300_timer_base + U300_TIMER_APP_DGPT1); - /* Reset the General Purpose timer 1. */ - writel(U300_TIMER_APP_RGPT1_TIMER_RESET, - u300_timer_base + U300_TIMER_APP_RGPT1); - /* IRQ in n * cycles */ - writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC); - /* - * We run one shot per tick here! (This is necessary to reconfigure, - * the timer will tilt if you don't!) - */ - writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT, - u300_timer_base + U300_TIMER_APP_SGPT1M); - /* Enable timer interrupts */ - writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE, - u300_timer_base + U300_TIMER_APP_GPT1IE); - /* Then enable the OS timer again */ - writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE, - u300_timer_base + U300_TIMER_APP_EGPT1); - return 0; -} - -static struct u300_clockevent_data u300_clockevent_data = { - /* Use general purpose timer 1 as clock event */ - .cevd = { - .name = "GPT1", - /* Reasonably fast and accurate clock event */ - .rating = 300, - .features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = u300_set_next_event, - .set_state_shutdown = u300_shutdown, - .set_state_periodic = u300_set_periodic, - .set_state_oneshot = u300_set_oneshot, - }, -}; - -/* Clock event timer interrupt handler */ -static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &u300_clockevent_data.cevd; - /* ACK/Clear timer IRQ for the APP GPT1 Timer */ - - writel(U300_TIMER_APP_GPT1IA_IRQ_ACK, - u300_timer_base + U300_TIMER_APP_GPT1IA); - evt->event_handler(evt); - return IRQ_HANDLED; -} - -/* - * Override the global weak sched_clock symbol with this - * local implementation which uses the clocksource to get some - * better resolution when scheduling the kernel. We accept that - * this wraps around for now, since it is just a relative time - * stamp. (Inspired by OMAP implementation.) - */ - -static u64 notrace u300_read_sched_clock(void) -{ - return readl(u300_timer_base + U300_TIMER_APP_GPT2CC); -} - -static unsigned long u300_read_current_timer(void) -{ - return readl(u300_timer_base + U300_TIMER_APP_GPT2CC); -} - -static struct delay_timer u300_delay_timer; - -/* - * This sets up the system timers, clock source and clock event. - */ -static int __init u300_timer_init_of(struct device_node *np) -{ - unsigned int irq; - struct clk *clk; - unsigned long rate; - int ret; - - u300_timer_base = of_iomap(np, 0); - if (!u300_timer_base) { - pr_err("could not ioremap system timer\n"); - return -ENXIO; - } - - /* Get the IRQ for the GP1 timer */ - irq = irq_of_parse_and_map(np, 2); - if (!irq) { - pr_err("no IRQ for system timer\n"); - return -EINVAL; - } - - pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq); - - /* Clock the interrupt controller */ - clk = of_clk_get(np, 0); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - ret = clk_prepare_enable(clk); - if (ret) - return ret; - - rate = clk_get_rate(clk); - - u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ); - - sched_clock_register(u300_read_sched_clock, 32, rate); - - u300_delay_timer.read_current_timer = &u300_read_current_timer; - u300_delay_timer.freq = rate; - register_current_timer_delay(&u300_delay_timer); - - /* - * Disable the "OS" and "DD" timers - these are designed for Symbian! - * Example usage in cnh1601578 cpu subsystem pd_timer_app.c - */ - writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE, - u300_timer_base + U300_TIMER_APP_CRC); - writel(U300_TIMER_APP_ROST_TIMER_RESET, - u300_timer_base + U300_TIMER_APP_ROST); - writel(U300_TIMER_APP_DOST_TIMER_DISABLE, - u300_timer_base + U300_TIMER_APP_DOST); - writel(U300_TIMER_APP_RDDT_TIMER_RESET, - u300_timer_base + U300_TIMER_APP_RDDT); - writel(U300_TIMER_APP_DDDT_TIMER_DISABLE, - u300_timer_base + U300_TIMER_APP_DDDT); - - /* Reset the General Purpose timer 1. */ - writel(U300_TIMER_APP_RGPT1_TIMER_RESET, - u300_timer_base + U300_TIMER_APP_RGPT1); - - /* Set up the IRQ handler */ - ret = request_irq(irq, u300_timer_interrupt, - IRQF_TIMER | IRQF_IRQPOLL, "U300 Timer Tick", NULL); - if (ret) - return ret; - - /* Reset the General Purpose timer 2 */ - writel(U300_TIMER_APP_RGPT2_TIMER_RESET, - u300_timer_base + U300_TIMER_APP_RGPT2); - /* Set this timer to run around forever */ - writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC); - /* Set continuous mode so it wraps around */ - writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS, - u300_timer_base + U300_TIMER_APP_SGPT2M); - /* Disable timer interrupts */ - writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE, - u300_timer_base + U300_TIMER_APP_GPT2IE); - /* Then enable the GP2 timer to use as a free running us counter */ - writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE, - u300_timer_base + U300_TIMER_APP_EGPT2); - - /* Use general purpose timer 2 as clock source */ - ret = clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC, - "GPT2", rate, 300, 32, clocksource_mmio_readl_up); - if (ret) { - pr_err("timer: failed to initialize U300 clock source\n"); - return ret; - } - - /* Configure and register the clockevent */ - clockevents_config_and_register(&u300_clockevent_data.cevd, rate, - 1, 0xffffffff); - - /* - * TODO: init and register the rest of the timers too, they can be - * used by hrtimers! - */ - return 0; -} - -TIMER_OF_DECLARE(u300_timer, "stericsson,u300-apptimer", - u300_timer_init_of);