Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-09-21 15:33:19 +00:00
Code Issues Packages Projects Releases Wiki Activity

mmc: core: Rework cd-gpio handling

Browse Source 
There are a few places around the code that invert inverted and possibly
inverted CD line. That's really confusing. Squash them all into one place
in mmc_gpiod_request_cd(). MMC_CAP2_CD_ACTIVE_HIGH is used analogously to
WP line: in GPIO mode it is used only at probe time to switch polarity, for
native mode it is left as is.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/db189b715596d63caf8c6a088bddc71dd69a879b.1576031637.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Michał Mirosław 2019-12-11 03:40:56 +01:00 committed by Ulf Hansson
parent 9073d10b09
commit 0f7c815d83
3 changed files with 12 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/gpio/gpiolib-of.c
View File

@ -104,23 +104,6 @@ static void of_gpio_flags_quirks(struct device_node *np,
enum of_gpio_flags *flags,
int index)
{
/*
* Handle MMC "cd-inverted" and "wp-inverted" semantics.
*/
if (IS_ENABLED(CONFIG_MMC)) {
/*
* Active low is the default according to the
* SDHCI specification and the device tree
* bindings. However the code in the current
* kernel was written such that the phandle
* flags were always respected, and "cd-inverted"
* would invert the flag from the device phandle.
*/
if (!strcmp(propname, "cd-gpios")) {
if (of_property_read_bool(np, "cd-inverted"))
*flags ^= OF_GPIO_ACTIVE_LOW;
}
}
/*
* Some GPIO fixed regulator quirks.
* Note that active low is the default.

21
drivers/mmc/core/host.c
View File

@ -175,7 +175,6 @@ int mmc_of_parse(struct mmc_host *host)
struct device *dev = host->parent;
u32 bus_width, drv_type, cd_debounce_delay_ms;
int ret;
bool cd_cap_invert, cd_gpio_invert = false;
if (!dev || !dev_fwnode(dev))
return 0;
@ -218,10 +217,12 @@ int mmc_of_parse(struct mmc_host *host)
*/
/* Parse Card Detection */
if (device_property_read_bool(dev, "non-removable")) {
host->caps |= MMC_CAP_NONREMOVABLE;
} else {
cd_cap_invert = device_property_read_bool(dev, "cd-inverted");
if (device_property_read_bool(dev, "cd-inverted"))
host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
if (device_property_read_u32(dev, "cd-debounce-delay-ms",
&cd_debounce_delay_ms))
@ -232,25 +233,11 @@ int mmc_of_parse(struct mmc_host *host)
ret = mmc_gpiod_request_cd(host, "cd", 0, false,
cd_debounce_delay_ms * 1000,
&cd_gpio_invert);
NULL);
if (!ret)
dev_info(host->parent, "Got CD GPIO\n");
else if (ret != -ENOENT && ret != -ENOSYS)
return ret;
/*
* There are two ways to flag that the CD line is inverted:
* through the cd-inverted flag and by the GPIO line itself
* being inverted from the GPIO subsystem. This is a leftover
* from the times when the GPIO subsystem did not make it
* possible to flag a line as inverted.
*
* If the capability on the host AND the GPIO line are
* both inverted, the end result is that the CD line is
* not inverted.
*/
if (cd_cap_invert ^ cd_gpio_invert)
host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
}
/* Parse Write Protection */

17
drivers/mmc/core/slot-gpio.c
View File

@ -19,7 +19,6 @@
struct mmc_gpio {
struct gpio_desc *ro_gpio;
struct gpio_desc *cd_gpio;
bool override_cd_active_level;
irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id);
char *ro_label;
char *cd_label;
@ -80,13 +79,6 @@ int mmc_gpio_get_cd(struct mmc_host *host)
return -ENOSYS;
cansleep = gpiod_cansleep(ctx->cd_gpio);
if (ctx->override_cd_active_level) {
int value = cansleep ?
gpiod_get_raw_value_cansleep(ctx->cd_gpio) :
gpiod_get_raw_value(ctx->cd_gpio);
return !value ^ !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
}
return cansleep ?
gpiod_get_value_cansleep(ctx->cd_gpio) :
gpiod_get_value(ctx->cd_gpio);
@ -194,10 +186,17 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
ctx->cd_debounce_delay_ms = debounce / 1000;
}
/* override forces default (active-low) polarity ... */
if (override_active_level && !gpiod_is_active_low(desc))
gpiod_toggle_active_low(desc);
/* ... or active-high */
if (host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH)
gpiod_toggle_active_low(desc);
if (gpio_invert)
*gpio_invert = !gpiod_is_active_low(desc);
ctx->override_cd_active_level = override_active_level;
ctx->cd_gpio = desc;
return 0;