Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-16 17:12:06 +00:00
Code Issues Packages Projects Releases Wiki Activity

e1000: Added driver comments and whitespace changes. Modified long lines of code to ensure they would not wrap beyond 80 characters.

Browse Source 
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
This commit is contained in:
Jeff Kirsher 2006-03-02 18:46:29 -08:00 committed by root
parent 30320be88f
commit 0f15a8fae8
4 changed files with 59 additions and 81 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/net/e1000/e1000.h
View File

@ -281,15 +281,15 @@ struct e1000_adapter {
/* RX */
#ifdef CONFIG_E1000_NAPI
boolean_t (*clean_rx) (struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do);
struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do);
#else
boolean_t (*clean_rx) (struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring);
struct e1000_rx_ring *rx_ring);
#endif
void (*alloc_rx_buf) (struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int cleaned_count);
struct e1000_rx_ring *rx_ring,
int cleaned_count);
struct e1000_rx_ring *rx_ring; /* One per active queue */
#ifdef CONFIG_E1000_NAPI
struct net_device *polling_netdev; /* One per active queue */

5
drivers/net/e1000/e1000_hw.c
View File

@ -3498,7 +3498,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
* bit. Then, take it out of reset.
* For pre-e1000_82571 hardware, we delay for 10ms between the assert
* and deassert. For e1000_82571 hardware and later, we instead delay
* for 10ms after the deassertion.
* for 50us between and 10ms after the deassertion.
*/
ctrl = E1000_READ_REG(hw, CTRL);
E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
@ -3920,7 +3920,8 @@ e1000_validate_mdi_setting(struct e1000_hw *hw)
/******************************************************************************
* Sets up eeprom variables in the hw struct. Must be called after mac_type
* is configured.
* is configured. Additionally, if this is ICH8, the flash controller GbE
* registers must be mapped, or this will crash.
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/

24
drivers/net/e1000/e1000_hw.h
View File

@ -2067,19 +2067,19 @@ struct e1000_host_command_info {
/* PCI-Ex registers */
/* PCI-Ex Control Register */
#define E1000_GCR_RXD_NO_SNOOP 0x00000001
#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
#define E1000_GCR_TXD_NO_SNOOP 0x00000008
#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
#define E1000_GCR_RXD_NO_SNOOP 0x00000001
#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
#define E1000_GCR_TXD_NO_SNOOP 0x00000008
#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
E1000_GCR_RXDSCW_NO_SNOOP | \
E1000_GCR_RXDSCR_NO_SNOOP | \
E1000_GCR TXD_NO_SNOOP | \
E1000_GCR_TXDSCW_NO_SNOOP | \
E1000_GCR_TXDSCR_NO_SNOOP)
#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
E1000_GCR_RXDSCW_NO_SNOOP | \
E1000_GCR_RXDSCR_NO_SNOOP | \
E1000_GCR_TXD_NO_SNOOP | \
E1000_GCR_TXDSCW_NO_SNOOP | \
E1000_GCR_TXDSCR_NO_SNOOP)
#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
/* Function Active and Power State to MNG */

101
drivers/net/e1000/e1000_main.c
View File

@ -29,6 +29,23 @@
#include "e1000.h"
/* Change Log
* 7.0.33 3-Feb-2006
* o Added another fix for the pass false carrier bit
* 7.0.32 24-Jan-2006
* o Need to rebuild with noew version number for the pass false carrier
* fix in e1000_hw.c
* 7.0.30 18-Jan-2006
* o fixup for tso workaround to disable it for pci-x
* o fix mem leak on 82542
* o fixes for 10 Mb/s connections and incorrect stats
* 7.0.28 01/06/2006
* o hardware workaround to only set "speed mode" bit for 1G link.
* 7.0.26 12/23/2005
* o wake on lan support modified for device ID 10B5
* o fix dhcp + vlan issue not making it to the iAMT firmware
* 7.0.24 12/9/2005
* o New hardware support for the Gigabit NIC embedded in the south bridge
* o Fixes to the recycling logic (skb->tail) from IBM LTC
* 6.3.9 12/16/2005
* o incorporate fix for recycled skbs from IBM LTC
* 6.3.7 11/18/2005
@ -46,54 +63,8 @@
* rx_buffer_len
* 6.3.1 9/19/05
* o Use adapter->tx_timeout_factor in Tx Hung Detect logic
(e1000_clean_tx_irq)
* (e1000_clean_tx_irq)
* o Support for 8086:10B5 device (Quad Port)
* 6.2.14 9/15/05
* o In AMT enabled configurations, set/reset DRV_LOAD bit on interface
* open/close
* 6.2.13 9/14/05
* o Invoke e1000_check_mng_mode only for 8257x controllers since it
* accesses the FWSM that is not supported in other controllers
* 6.2.12 9/9/05
* o Add support for device id E1000_DEV_ID_82546GB_QUAD_COPPER
* o set RCTL:SECRC only for controllers newer than 82543.
* o When the n/w interface comes down reset DRV_LOAD bit to notify f/w.
* This code was moved from e1000_remove to e1000_close
* 6.2.10 9/6/05
* o Fix error in updating RDT in el1000_alloc_rx_buffers[_ps] -- one off.
* o Enable fc by default on 82573 controllers (do not read eeprom)
* o Fix rx_errors statistic not to include missed_packet_count
* o Fix rx_dropped statistic not to include missed_packet_count
(Padraig Brady)
* 6.2.9 8/30/05
* o Remove call to update statistics from the controller ib e1000_get_stats
* 6.2.8 8/30/05
* o Improved algorithm for rx buffer allocation/rdt update
* o Flow control watermarks relative to rx PBA size
* o Simplified 'Tx Hung' detect logic
* 6.2.7 8/17/05
* o Report rx buffer allocation failures and tx timeout counts in stats
* 6.2.6 8/16/05
* o Implement workaround for controller erratum -- linear non-tso packet
* following a TSO gets written back prematurely
* 6.2.5 8/15/05
* o Set netdev->tx_queue_len based on link speed/duplex settings.
* o Fix net_stats.rx_fifo_errors <p@draigBrady.com>
* o Do not power off PHY if SoL/IDER session is active
* 6.2.4 8/10/05
* o Fix loopback test setup/cleanup for 82571/3 controllers
* o Fix parsing of outgoing packets (e1000_transfer_dhcp_info) to treat
* all packets as raw
* o Prevent operations that will cause the PHY to be reset if SoL/IDER
* sessions are active and log a message
* 6.2.2 7/21/05
* o used fixed size descriptors for all MTU sizes, reduces memory load
* 6.1.2 4/13/05
* o Fixed ethtool diagnostics
* o Enabled flow control to take default eeprom settings
* o Added stats_lock around e1000_read_phy_reg commands to avoid concurrent
* calls, one from mii_ioctl and other from within update_stats while
* processing MIIREG ioctl.
*/
char e1000_driver_name[] = "e1000";
@ -178,13 +149,13 @@ int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
struct e1000_tx_ring *txdr);
struct e1000_tx_ring *txdr);
static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
struct e1000_rx_ring *rxdr);
struct e1000_rx_ring *rxdr);
static void e1000_free_tx_resources(struct e1000_adapter *adapter,
struct e1000_tx_ring *tx_ring);
struct e1000_tx_ring *tx_ring);
static void e1000_free_rx_resources(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring);
struct e1000_rx_ring *rx_ring);
void e1000_update_stats(struct e1000_adapter *adapter);
/* Local Function Prototypes */
@ -1727,6 +1698,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
uint32_t rdlen, rctl, rxcsum, ctrl_ext;
if (adapter->rx_ps_pages) {
/* this is a 32 byte descriptor */
rdlen = adapter->rx_ring[0].count *
sizeof(union e1000_rx_desc_packet_split);
adapter->clean_rx = e1000_clean_rx_irq_ps;
@ -2576,9 +2548,9 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
/* Workaround for Controller erratum --
* descriptor for non-tso packet in a linear SKB that follows a
* tso gets written back prematurely before the data is fully
* DMAd to the controller */
* DMA'd to the controller */
if (!skb->data_len && tx_ring->last_tx_tso &&
!skb_shinfo(skb)->tso_size) {
!skb_shinfo(skb)->tso_size) {
tx_ring->last_tx_tso = 0;
size -= 4;
}
@ -2866,7 +2838,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
#ifdef NETIF_F_TSO
/* Controller Erratum workaround */
if (!skb->data_len && tx_ring->last_tx_tso &&
!skb_shinfo(skb)->tso_size)
!skb_shinfo(skb)->tso_size)
count++;
#endif
@ -2889,7 +2861,9 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
if (adapter->pcix_82544)
count += nr_frags;
if (adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) )
if (adapter->hw.tx_pkt_filtering &&
(adapter->hw.mac_type == e1000_82573))
e1000_transfer_dhcp_info(adapter, skb);
local_irq_save(flags);
@ -3892,7 +3866,6 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
goto map_skb;
}
if (unlikely(!skb)) {
/* Better luck next round */
adapter->alloc_rx_buff_failed++;
@ -4445,8 +4418,8 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
}
#ifdef CONFIG_PM
/* these functions save and restore 16 or 64 dwords (64-256 bytes) of config
* space versus the 64 bytes that pci_[save|restore]_state handle
/* Save/restore 16 or 64 dwords of PCI config space depending on which
* bus we're on (PCI(X) vs. PCI-E)
*/
#define PCIE_CONFIG_SPACE_LEN 256
#define PCI_CONFIG_SPACE_LEN 64
@ -4456,6 +4429,7 @@ e1000_pci_save_state(struct e1000_adapter *adapter)
struct pci_dev *dev = adapter->pdev;
int size;
int i;
if (adapter->hw.mac_type >= e1000_82571)
size = PCIE_CONFIG_SPACE_LEN;
else
@ -4479,8 +4453,10 @@ e1000_pci_restore_state(struct e1000_adapter *adapter)
struct pci_dev *dev = adapter->pdev;
int size;
int i;
if (adapter->config_space == NULL)
return;
if (adapter->hw.mac_type >= e1000_82571)
size = PCIE_CONFIG_SPACE_LEN;
else
@ -4508,8 +4484,8 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
e1000_down(adapter);
#ifdef CONFIG_PM
/* implement our own version of pci_save_state(pdev) because pci
* express adapters have larger 256 byte config spaces */
/* Implement our own version of pci_save_state(pdev) because pci-
* express adapters have 256-byte config spaces. */
retval = e1000_pci_save_state(adapter);
if (retval)
return retval;
@ -4566,7 +4542,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
retval = pci_enable_wake(pdev, PCI_D3hot, 0);
if (retval)
DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
retval = pci_enable_wake(pdev, PCI_D3cold, 0); /* 4 == D3 cold */
retval = pci_enable_wake(pdev, PCI_D3cold, 0);
if (retval)
DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
}
@ -4582,7 +4558,8 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state)
DPRINTK(PROBE, ERR, "Error enabling D3 wake\n");
retval = pci_enable_wake(pdev, PCI_D3cold, 1);
if (retval)
DPRINTK(PROBE, ERR, "Error enabling D3 cold wake\n");
DPRINTK(PROBE, ERR,
"Error enabling D3 cold wake\n");
}
}