diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig index 19a96ce515c1..66b7cffdb0c2 100644 --- a/drivers/mtd/nand/raw/ingenic/Kconfig +++ b/drivers/mtd/nand/raw/ingenic/Kconfig @@ -16,7 +16,7 @@ config MTD_NAND_JZ4780 if MTD_NAND_JZ4780 config MTD_NAND_INGENIC_ECC - tristate + bool config MTD_NAND_JZ4740_ECC tristate "Hardware BCH support for JZ4740 SoC" diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile index 1ac4f455baea..b63d36889263 100644 --- a/drivers/mtd/nand/raw/ingenic/Makefile +++ b/drivers/mtd/nand/raw/ingenic/Makefile @@ -2,7 +2,9 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o -obj-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o +ingenic_nand-y += ingenic_nand_drv.o +ingenic_nand-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o + obj-$(CONFIG_MTD_NAND_JZ4740_ECC) += jz4740_ecc.o obj-$(CONFIG_MTD_NAND_JZ4725B_BCH) += jz4725b_bch.o obj-$(CONFIG_MTD_NAND_JZ4780_BCH) += jz4780_bch.o diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c index d3e085c5685a..c954189606f6 100644 --- a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c +++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c @@ -30,7 +30,6 @@ int ingenic_ecc_calculate(struct ingenic_ecc *ecc, { return ecc->ops->calculate(ecc, params, buf, ecc_code); } -EXPORT_SYMBOL(ingenic_ecc_calculate); /** * ingenic_ecc_correct() - detect and correct bit errors @@ -51,7 +50,6 @@ int ingenic_ecc_correct(struct ingenic_ecc *ecc, { return ecc->ops->correct(ecc, params, buf, ecc_code); } -EXPORT_SYMBOL(ingenic_ecc_correct); /** * ingenic_ecc_get() - get the ECC controller device @@ -111,7 +109,6 @@ struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *of_node) } return ecc; } -EXPORT_SYMBOL(of_ingenic_ecc_get); /** * ingenic_ecc_release() - release the ECC controller device @@ -122,7 +119,6 @@ void ingenic_ecc_release(struct ingenic_ecc *ecc) clk_disable_unprepare(ecc->clk); put_device(ecc->dev); } -EXPORT_SYMBOL(ingenic_ecc_release); int ingenic_ecc_probe(struct platform_device *pdev) { @@ -159,8 +155,3 @@ int ingenic_ecc_probe(struct platform_device *pdev) return 0; } EXPORT_SYMBOL(ingenic_ecc_probe); - -MODULE_AUTHOR("Alex Smith "); -MODULE_AUTHOR("Harvey Hunt "); -MODULE_DESCRIPTION("Ingenic ECC common driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c similarity index 100% rename from drivers/mtd/nand/raw/ingenic/ingenic_nand.c rename to drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c index b021a5720b42..89773293c64d 100644 --- a/drivers/mtd/nand/raw/sunxi_nand.c +++ b/drivers/mtd/nand/raw/sunxi_nand.c @@ -51,6 +51,7 @@ #define NFC_REG_USER_DATA(x) (0x0050 + ((x) * 4)) #define NFC_REG_SPARE_AREA 0x00A0 #define NFC_REG_PAT_ID 0x00A4 +#define NFC_REG_MDMA_CNT 0x00C4 #define NFC_RAM0_BASE 0x0400 #define NFC_RAM1_BASE 0x0800 @@ -69,6 +70,7 @@ #define NFC_PAGE_SHIFT(x) (((x) < 10 ? 0 : (x) - 10) << 8) #define NFC_SAM BIT(12) #define NFC_RAM_METHOD BIT(14) +#define NFC_DMA_TYPE_NORMAL BIT(15) #define NFC_DEBUG_CTL BIT(31) /* define bit use in NFC_ST */ @@ -205,14 +207,13 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand) * NAND Controller capabilities structure: stores NAND controller capabilities * for distinction between compatible strings. * - * @sram_through_ahb: On A23, we choose to access the internal RAM through AHB - * instead of MBUS (less configuration). A10, A10s, A13 and - * A20 use the MBUS but no extra configuration is needed. + * @extra_mbus_conf: Contrary to A10, A10s and A13, accessing internal RAM + * through MBUS on A23/A33 needs extra configuration. * @reg_io_data: I/O data register * @dma_maxburst: DMA maxburst */ struct sunxi_nfc_caps { - bool sram_through_ahb; + bool extra_mbus_conf; unsigned int reg_io_data; unsigned int dma_maxburst; }; @@ -368,28 +369,12 @@ static int sunxi_nfc_dma_op_prepare(struct sunxi_nfc *nfc, const void *buf, goto err_unmap_buf; } - /* - * On A23, we suppose the "internal RAM" (p.12 of the NFC user manual) - * refers to the NAND controller's internal SRAM. This memory is mapped - * and so is accessible from the AHB. It seems that it can also be - * accessed by the MBUS. MBUS accesses are mandatory when using the - * internal DMA instead of the external DMA engine. - * - * During DMA I/O operation, either we access this memory from the AHB - * by clearing the NFC_RAM_METHOD bit, or we set the bit and use the - * MBUS. In this case, we should also configure the MBUS DMA length - * NFC_REG_MDMA_CNT(0xC4) to be chunksize * nchunks. NAND I/O over MBUS - * are also limited to 32kiB pages. - */ - if (nfc->caps->sram_through_ahb) - writel(readl(nfc->regs + NFC_REG_CTL) & ~NFC_RAM_METHOD, - nfc->regs + NFC_REG_CTL); - else - writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD, - nfc->regs + NFC_REG_CTL); - + writel(readl(nfc->regs + NFC_REG_CTL) | NFC_RAM_METHOD, + nfc->regs + NFC_REG_CTL); writel(nchunks, nfc->regs + NFC_REG_SECTOR_NUM); writel(chunksize, nfc->regs + NFC_REG_CNT); + if (nfc->caps->extra_mbus_conf) + writel(chunksize * nchunks, nfc->regs + NFC_REG_MDMA_CNT); dmat = dmaengine_submit(dmad); @@ -2151,6 +2136,11 @@ static int sunxi_nfc_probe(struct platform_device *pdev) dmac_cfg.src_maxburst = nfc->caps->dma_maxburst; dmac_cfg.dst_maxburst = nfc->caps->dma_maxburst; dmaengine_slave_config(nfc->dmac, &dmac_cfg); + + if (nfc->caps->extra_mbus_conf) + writel(readl(nfc->regs + NFC_REG_CTL) | + NFC_DMA_TYPE_NORMAL, nfc->regs + NFC_REG_CTL); + } else { dev_warn(dev, "failed to request rxtx DMA channel\n"); } @@ -2200,7 +2190,7 @@ static const struct sunxi_nfc_caps sunxi_nfc_a10_caps = { }; static const struct sunxi_nfc_caps sunxi_nfc_a23_caps = { - .sram_through_ahb = true, + .extra_mbus_conf = true, .reg_io_data = NFC_REG_A23_IO_DATA, .dma_maxburst = 8, }; diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c index e5586390026a..e6c646007cda 100644 --- a/drivers/mtd/nand/spi/gigadevice.c +++ b/drivers/mtd/nand/spi/gigadevice.c @@ -180,7 +180,7 @@ static const struct spinand_info gigadevice_spinand_table[] = { SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout, gd5fxgq4xa_ecc_get_status)), SPINAND_INFO("GD5F4GQ4xA", 0xF4, - NAND_MEMORG(1, 2048, 64, 64, 4096, 40, 1, 1, 1), + NAND_MEMORG(1, 2048, 64, 64, 4096, 80, 1, 1, 1), NAND_ECCREQ(8, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, &write_cache_variants, diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c index 6502727049a8..21def3f8fb36 100644 --- a/drivers/mtd/nand/spi/macronix.c +++ b/drivers/mtd/nand/spi/macronix.c @@ -100,7 +100,7 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand, static const struct spinand_info macronix_spinand_table[] = { SPINAND_INFO("MX35LF1GE4AB", 0x12, - NAND_MEMORG(1, 2048, 64, 64, 1024, 40, 1, 1, 1), + NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(4, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, &write_cache_variants, @@ -109,7 +109,7 @@ static const struct spinand_info macronix_spinand_table[] = { SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, mx35lf1ge4ab_ecc_get_status)), SPINAND_INFO("MX35LF2GE4AB", 0x22, - NAND_MEMORG(1, 2048, 64, 64, 2048, 20, 2, 1, 1), + NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 2, 1, 1), NAND_ECCREQ(4, 512), SPINAND_INFO_OP_VARIANTS(&read_cache_variants, &write_cache_variants,