diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml new file mode 100644 index 000000000000..a5cf040ab4ea --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip's LCDC Display + +maintainers: + - Nicolas Ferre + - Dharma Balasubiramani + +description: + The LCD Controller (LCDC) consists of logic for transferring LCD image data + from an external display buffer to a TFT LCD panel. The LCDC has one display + input buffer per layer that fetches pixels through the single bus host + interface and a look-up table to allow palletized display configurations. The + LCDC is programmable on a per layer basis, and supports different LCD + resolutions, window sizes, image formats and pixel depths. + +# We need a select here since this schema is applicable only for nodes with the +# following properties + +select: + anyOf: + - required: [ 'atmel,dmacon' ] + - required: [ 'atmel,lcdcon2' ] + - required: [ 'atmel,guard-time' ] + +properties: + atmel,dmacon: + $ref: /schemas/types.yaml#/definitions/uint32 + description: dma controller configuration + + atmel,lcdcon2: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd controller configuration + + atmel,guard-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd guard time (Delay in frame periods) + maximum: 127 + + bits-per-pixel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd panel bit-depth. + enum: [1, 2, 4, 8, 16, 24, 32] + + atmel,lcdcon-backlight: + $ref: /schemas/types.yaml#/definitions/flag + description: enable backlight + + atmel,lcdcon-backlight-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: invert backlight PWM polarity + + atmel,lcd-wiring-mode: + $ref: /schemas/types.yaml#/definitions/string + description: lcd wiring mode "RGB" or "BRG" + enum: + - RGB + - BRG + + atmel,power-control-gpio: + description: gpio to power on or off the LCD (as many as needed) + maxItems: 1 + + display-timings: + $ref: panel/display-timings.yaml# + +required: + - atmel,dmacon + - atmel,lcdcon2 + - atmel,guard-time + - bits-per-pixel + +additionalProperties: false + +examples: + - | + display: panel { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt deleted file mode 100644 index b5e355ada2fa..000000000000 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ /dev/null @@ -1,87 +0,0 @@ -Atmel LCDC Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : - "atmel,at91sam9261-lcdc" , - "atmel,at91sam9263-lcdc" , - "atmel,at91sam9g10-lcdc" , - "atmel,at91sam9g45-lcdc" , - "atmel,at91sam9g45es-lcdc" , - "atmel,at91sam9rl-lcdc" , -- reg : Should contain 1 register ranges(address and length). - Can contain an additional register range(address and length) - for fixed framebuffer memory. Useful for dedicated memories. -- interrupts : framebuffer controller interrupt -- display: a phandle pointing to the display node - -Required nodes: -- display: a display node is required to initialize the lcd panel - This should be in the board dts. -- default-mode: a videomode within the display with timing parameters - as specified below. - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. - -Example: - - fb0: fb@00500000 { - compatible = "atmel,at91sam9g45-lcdc"; - reg = <0x00500000 0x1000>; - interrupts = <23 3 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fb>; - display = <&display0>; - #address-cells = <1>; - #size-cells = <1>; - - }; - -Example for fixed framebuffer memory: - - fb0: fb@00500000 { - compatible = "atmel,at91sam9263-lcdc"; - reg = <0x00700000 0x1000 0x70000000 0x200000>; - [...] - }; - -Atmel LCDC Display ------------------------------------------------------ -Required properties (as per of_videomode_helper): - - - atmel,dmacon: dma controller configuration - - atmel,lcdcon2: lcd controller configuration - - atmel,guard-time: lcd guard time (Delay in frame periods) - - bits-per-pixel: lcd panel bit-depth. - -Optional properties (as per of_videomode_helper): - - atmel,lcdcon-backlight: enable backlight - - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity - - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" - - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) - -Example: - display0: display { - bits-per-pixel = <32>; - atmel,lcdcon-backlight; - atmel,dmacon = <0x1>; - atmel,lcdcon2 = <0x80008002>; - atmel,guard-time = <9>; - atmel,lcd-wiring-mode = <1>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hback-porch = <1>; - hfront-porch = <1>; - vback-porch = <40>; - vfront-porch = <1>; - hsync-len = <45>; - vsync-len = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml new file mode 100644 index 000000000000..1b6f7e395006 --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel,lcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip's LCDC Framebuffer + +maintainers: + - Nicolas Ferre + - Dharma Balasubiramani + +description: + The LCDC works with a framebuffer, which is a section of memory that contains + a complete frame of data representing pixel values for the display. The LCDC + reads the pixel data from the framebuffer and sends it to the LCD panel to + render the image. + +properties: + compatible: + enum: + - atmel,at91sam9261-lcdc + - atmel,at91sam9263-lcdc + - atmel,at91sam9g10-lcdc + - atmel,at91sam9g45-lcdc + - atmel,at91sam9g45es-lcdc + - atmel,at91sam9rl-lcdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: hclk + - const: lcdc_clk + + display: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle pointing to the display node. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - display + +additionalProperties: false + +examples: + - | + #include + #include + fb@500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "hclk", "lcdc_clk"; + display = <&display>; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt deleted file mode 100644 index 3a401590320f..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt +++ /dev/null @@ -1,112 +0,0 @@ -The Exynos display port interface should be configured based on -the type of panel connected to it. - -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: deprecated, use phys and phy-names - -reg: deprecated - Base address of DP PHY register. - -samsung,enable-mask: deprecated - The bit-mask used to enable/disable DP PHY. - -For the Panel initialization, we read data from dp-controller node. -Required properties for dp-controller: - -compatible: - should be "samsung,exynos5-dp". - -reg: - physical base address of the controller and length - of memory mapped region. - -interrupts: - interrupt combiner values. - -clocks: - from common clock binding: handle to dp clock. - -clock-names: - from common clock binding: Shall be "dp". - -phys: - from general PHY binding: the phandle for the PHY device. - -phy-names: - from general PHY binding: Should be "dp". - -Optional properties for dp-controller: - -interlaced: - interlace scan mode. - Progressive if defined, Interlaced if not defined - -vsync-active-high: - VSYNC polarity configuration. - High if defined, Low if not defined - -hsync-active-high: - HSYNC polarity configuration. - High if defined, Low if not defined - -samsung,hpd-gpio: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug - detection - -video interfaces: Device node can contain video interface port - nodes according to [1]. - - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/display/panel/display-timing.txt - -For the below properties, please refer to Analogix DP binding document: - * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml - -phys (required) - -phy-names (required) - -hpd-gpios (optional) - force-hpd (optional) - -Deprecated properties for DisplayPort: --interlaced: deprecated prop that can parsed from drm_display_mode. --vsync-active-high: deprecated prop that can parsed from drm_display_mode. --hsync-active-high: deprecated prop that can parsed from drm_display_mode. --samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode. --samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode. --samsung,color-space: deprecated prop that can parsed from drm_display_info. --samsung,color-depth: deprecated prop that can parsed from drm_display_info. --samsung,link-rate: deprecated prop that can reading from monitor by dpcd method. --samsung,lane-count: deprecated prop that can reading from monitor by dpcd method. --samsung,hpd-gpio: deprecated name for hpd-gpios. - -------------------------------------------------------------------------------- - -Example: - -SOC specific portion: - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x10000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - clocks = <&clock 342>; - clock-names = "dp"; - - phys = <&dp_phy>; - phy-names = "dp"; - }; - -Board Specific portion: - dp-controller { - display-timings { - native-mode = <&lcd_timing>; - lcd_timing: 1366x768 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml index acd2f3faa6b9..0aa2d3fbadaa 100644 --- a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml +++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml @@ -17,10 +17,12 @@ properties: compatible: const: abt,y030xx067a + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml index 75a09df68ba0..2399cabf044c 100644 --- a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml +++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml @@ -21,7 +21,10 @@ allOf: properties: compatible: const: asus,z00t-tm5p5-n35596 - reg: true + + reg: + maxItems: 1 + reset-gpios: true vdd-supply: description: core voltage supply diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml index a8f3afa922c8..8b7448ad9138 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml @@ -26,6 +26,9 @@ properties: compatible: const: boe,bf060y8m-aj0 + reg: + maxItems: 1 + elvdd-supply: description: EL Driving positive (VDD) supply (4.40-4.80V) elvss-supply: @@ -38,7 +41,6 @@ properties: description: I/O voltage supply (1.62-1.98V) port: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml index 272a3a018a33..f2496cdd9260 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml @@ -18,9 +18,11 @@ properties: - const: boe,himax8279d8p - const: boe,himax8279d10p + reg: + maxItems: 1 + backlight: true enable-gpios: true - reg: true pp33-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml index 32df26cbfeed..5eaccce13c21 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml @@ -18,7 +18,9 @@ properties: # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel - boe,th101mb31ig002-28a - reg: true + reg: + maxItems: 1 + backlight: true enable-gpios: true power-supply: true diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index 906ef62709b8..9e603cad1348 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -38,7 +38,7 @@ properties: - starry,ili9882t reg: - description: the virtual channel number of a DSI peripheral + maxItems: 1 enable-gpios: description: a GPIO spec for the enable pin diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml index 265ab6d30572..f4cb825d1e96 100644 --- a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml +++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: elida,kd35t133 - reg: true + + reg: + maxItems: 1 + backlight: true port: true reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml index d13c4bd26de4..9847da784cc8 100644 --- a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml +++ b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml @@ -17,6 +17,9 @@ properties: compatible: const: fascontek,fs035vg158 + reg: + maxItems: 1 + spi-3wire: true required: diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml index 81adb82f061d..0d8707a5844d 100644 --- a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml +++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: feixin,k101-im2ba02 - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true avdd-supply: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml index 174661d13811..56bcd152f43c 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml @@ -21,6 +21,9 @@ properties: contains: const: djn,9a-3r063-1102b + reg: + maxItems: 1 + vdd1-supply: description: Digital voltage rail @@ -30,7 +33,6 @@ properties: vsp-supply: description: Negative source voltage rail - reg: true port: true required: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml index 916bb7f94206..644387e4fb6f 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -26,7 +26,8 @@ properties: - powkiddy,x55-panel - const: himax,hx8394 - reg: true + reg: + maxItems: 1 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml index 3cabbba86581..ef5a2240b684 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml @@ -24,6 +24,9 @@ properties: - newhaven,1.8-128160EF - const: ilitek,ili9163 + reg: + maxItems: 1 + spi-max-frequency: maximum: 32000000 @@ -32,7 +35,6 @@ properties: description: Display data/command selection (D/CX) backlight: true - reg: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml index 7d221ef35443..44423465f6e3 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml @@ -26,6 +26,9 @@ properties: - dlink,dir-685-panel - const: ilitek,ili9322 + reg: + maxItems: 1 + reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml index 94f169ea065a..5f41758c96d5 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml @@ -28,7 +28,8 @@ properties: - canaan,kd233-tft - const: ilitek,ili9341 - reg: true + reg: + maxItems: 1 dc-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml index f4f91f93f490..ff67129c9466 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml @@ -20,9 +20,11 @@ properties: - tianma,tm041xdhg01 - const: ilitek,ili9805 + reg: + maxItems: 1 + avdd-supply: true dvdd-supply: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index a015dce72f60..baf5dfe5f5eb 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -24,9 +24,11 @@ properties: - wanchanglong,w552946aba - const: ilitek,ili9881c + reg: + maxItems: 1 + backlight: true power-supply: true - reg: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml index 72788e3e6c59..c7df9a7f6589 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml +++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml @@ -17,10 +17,12 @@ properties: compatible: const: innolux,ej030na + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml index 5a5f071627fb..4164e3f7061d 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml @@ -16,9 +16,11 @@ properties: compatible: const: innolux,p097pfg + reg: + maxItems: 1 + backlight: true enable-gpios: true - reg: true avdd-supply: description: The regulator that provides positive voltage diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml index 41eb7fbf7715..20afdb4568a2 100644 --- a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml +++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml @@ -21,7 +21,8 @@ properties: - radxa,display-8hd-ad002 - const: jadard,jd9365da-h3 - reg: true + reg: + maxItems: 1 vdd-supply: description: supply regulator for VDD, usually 3.3V diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml index 2f4d27a309a7..a8621459005b 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml @@ -26,7 +26,9 @@ properties: compatible: const: jdi,lpm102a188a - reg: true + reg: + maxItems: 1 + enable-gpios: true reset-gpios: true power-supply: true diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml index 63c82a4378ff..0c8b5cb78bfe 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml @@ -16,8 +16,10 @@ properties: compatible: const: jdi,lt070me05000 + reg: + maxItems: 1 + enable-gpios: true - reg: true reset-gpios: true vddp-supply: diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml index b4be9bd8ddde..d86c916f7b55 100644 --- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml @@ -17,10 +17,12 @@ properties: compatible: const: kingdisplay,kd035g6-54nt + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true spi-3wire: true diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml index 7a55961e1a3d..b5dc02b27200 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -18,6 +18,9 @@ properties: compatible: const: leadtek,ltk035c5444t + reg: + maxItems: 1 + spi-3wire: true required: diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml index a40ab887ada7..e2a2dd4ef5fa 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -18,7 +18,10 @@ properties: - leadtek,ltk050h3146w - leadtek,ltk050h3146w-a2 - leadtek,ltk050h3148w - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true iovcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index d589f1677214..af9e0ea0e72f 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -17,7 +17,10 @@ properties: enum: - leadtek,ltk101b4029w - leadtek,ltk500hd1829 - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true iovcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml index ee357e139ac0..590ccc27d104 100644 --- a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml +++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml @@ -21,7 +21,8 @@ properties: compatible: const: lg,lg4573 - reg: true + reg: + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml index 628c4b898111..3de17fd8513b 100644 --- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml +++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml @@ -17,6 +17,9 @@ properties: compatible: const: lgphilips,lb035q02 + reg: + maxItems: 1 + label: true enable-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml index accf933d6e46..1cffe4d6d498 100644 --- a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml +++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml @@ -21,9 +21,11 @@ properties: compatible: const: nec,nl8048hl11 + reg: + maxItems: 1 + label: true port: true - reg: true reset-gpios: true spi-max-frequency: diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml index 7a634fbc465e..d3a25a8fd7e3 100644 --- a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml +++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml @@ -24,7 +24,9 @@ properties: - powkiddy,rk2023-panel - const: newvision,nv3051d - reg: true + reg: + maxItems: 1 + backlight: true port: true reset-gpios: diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml index 91921f4b0e5f..bb50fd5506c3 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -24,7 +24,10 @@ properties: string determines how the NT35510 panel driver shall be configured to work with the indicated panel. The novatek,nt35510 compatible shall always be provided as a fallback. - reg: true + + reg: + maxItems: 1 + reset-gpios: true vdd-supply: description: regulator that supplies the vdd voltage diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml index 7cac93b20944..a9e40493986b 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml @@ -33,6 +33,9 @@ properties: to work with the indicated panel. The novatek,nt35950 compatible shall always be provided as a fallback. + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio @@ -49,7 +52,6 @@ properties: backlight: true ports: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml index bbeea8cfa5fb..c4bae4f77085 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml @@ -27,6 +27,9 @@ properties: - lenovo,j606f-boe-nt36523w - const: novatek,nt36523w + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA @@ -34,7 +37,6 @@ properties: vddio-supply: description: regulator that supplies the I/O voltage - reg: true rotation: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml index ae821f465e1c..800a2f0a4dad 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml @@ -29,6 +29,9 @@ properties: determines how the NT36672A panel driver is configured for the indicated panel. The novatek,nt36672a compatible shall always be provided as a fallback. + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio @@ -44,7 +47,6 @@ properties: vddneg-supply: description: phandle of the negative boost supply regulator - reg: true port: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml index 72463795e4c6..e5d8785fdf90 100644 --- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml @@ -38,10 +38,12 @@ properties: compatible: const: olimex,lcd-olinuxino + reg: + maxItems: 1 + backlight: true enable-gpios: true power-supply: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index e808215cb39e..d0ac31ab60cf 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -71,6 +71,9 @@ properties: - shineworld,lh133k - const: panel-mipi-dbi-spi + reg: + maxItems: 1 + write-only: type: boolean description: diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml index d62fd692bf10..4825792bf712 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml @@ -16,7 +16,9 @@ properties: compatible: const: raydium,rm67191 - reg: true + reg: + maxItems: 1 + port: true reset-gpios: true width-mm: true diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml index f436ba6738ca..7ad223f98253 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml @@ -22,6 +22,9 @@ properties: - const: fairphone,fp5-rm692e5-boe - const: raydium,rm692e5 + reg: + maxItems: 1 + dvdd-supply: description: Digital voltage rail @@ -31,7 +34,6 @@ properties: vddio-supply: description: I/O voltage rail - reg: true port: true required: diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 95ce22c6787a..04f86e0cbac9 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -14,7 +14,7 @@ properties: const: ronbo,rb070d30 reg: - description: MIPI-DSI virtual channel + maxItems: 1 power-gpios: description: GPIO used for the power pin diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml index ccc482570d6a..e8f9e9d06a29 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml @@ -33,7 +33,9 @@ properties: # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel - samsung,s6e3hf2 - reg: true + reg: + maxItems: 1 + reset-gpios: true enable-gpios: true te-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml index 58fa073ce258..e081c84a932b 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml @@ -11,12 +11,15 @@ maintainers: allOf: - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: const: samsung,ams495qa01 - reg: true + reg: + maxItems: 1 + reset-gpios: description: reset gpio, must be GPIO_ACTIVE_LOW elvdd-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml index c0fabeb38628..bc92b16c95b9 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml @@ -17,9 +17,11 @@ properties: compatible: const: samsung,ld9040 + reg: + maxItems: 1 + display-timings: true port: true - reg: true reset-gpios: true vdd3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml index 70ffc88d2a08..7ce8540551f9 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml @@ -21,7 +21,8 @@ properties: compatible: const: samsung,lms380kf01 - reg: true + reg: + maxItems: 1 interrupts: description: provides an optional ESD (electrostatic discharge) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml index 5e77cee93f83..9363032883de 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml @@ -20,7 +20,8 @@ properties: compatible: const: samsung,lms397kf04 - reg: true + reg: + maxItems: 1 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml index 66d147496bc3..2af5bc47323f 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml @@ -16,8 +16,10 @@ properties: compatible: const: samsung,s6d16d0 + reg: + maxItems: 1 + port: true - reg: true reset-gpios: true vdd1-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml index d273faf4442a..d74904164719 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml @@ -20,7 +20,8 @@ properties: compatible: const: samsung,s6d27a1 - reg: true + reg: + maxItems: 1 interrupts: description: provides an optional ESD (electrostatic discharge) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml index 45a236d2cc70..939da65114bf 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml @@ -24,7 +24,8 @@ properties: - samsung,ltl101at01 - const: samsung,s6d7aa0 - reg: true + reg: + maxItems: 1 backlight: description: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml index 6f1fc7469f07..c47e2a1a30e5 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml @@ -18,7 +18,9 @@ properties: compatible: const: samsung,s6e63m0 - reg: true + reg: + maxItems: 1 + reset-gpios: true port: true default-brightness: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml index b749e9e906b7..42634fc3b5b2 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: samsung,s6e88a0-ams452ef01 - reg: true + + reg: + maxItems: 1 + port: true reset-gpios: true vdd3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index 200fbf1c74a0..4601fa460680 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -16,7 +16,9 @@ properties: compatible: const: samsung,s6e8aa0 - reg: true + reg: + maxItems: 1 + reset-gpios: true display-timings: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml index 57b44a0e763d..ce820b96a7e2 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml @@ -37,7 +37,9 @@ properties: - enum: - sharp,lq101r1sx01 - reg: true + reg: + maxItems: 1 + power-supply: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml index a90d0d8bf7c9..b6ea246430ce 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml @@ -16,7 +16,9 @@ properties: compatible: const: sharp,ls043t1le01-qhd - reg: true + reg: + maxItems: 1 + backlight: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml index 271c097cc9a4..77a4fce129e7 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml @@ -16,7 +16,9 @@ properties: compatible: const: sharp,ls060t1sx01 - reg: true + reg: + maxItems: 1 + backlight: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml index ef162b51d010..0ce2ea13583d 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml @@ -21,7 +21,9 @@ properties: - jasonic,jt240mhqs-hwt-ek-e3 - sitronix,st7789v - reg: true + reg: + maxItems: 1 + reset-gpios: true power-supply: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml index 059cc6dbcfca..fd778a20f760 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -22,7 +22,10 @@ properties: enum: - sony,acx424akp - sony,acx424akm - reg: true + + reg: + maxItems: 1 + reset-gpios: true vddi-supply: description: regulator that supplies the vddi voltage diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml index 98abdf4ddeac..5a8260224b74 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml @@ -17,6 +17,9 @@ properties: compatible: const: sony,acx565akm + reg: + maxItems: 1 + label: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml index 07bce556ad40..191b692125e1 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml @@ -20,7 +20,8 @@ properties: compatible: const: sony,td4353-jdi-tama - reg: true + reg: + maxItems: 1 backlight: true width-mm: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml index 967972939598..a58a31349757 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml @@ -21,7 +21,8 @@ properties: compatible: const: sony,tulip-truly-nt35521 - reg: true + reg: + maxItems: 1 positive5-supply: description: Positive 5V supply diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml index e5617d125567..2fd6e0ec3682 100644 --- a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml +++ b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml @@ -19,15 +19,17 @@ properties: - sharp,ls068b3sx02 - const: syna,r63353 + reg: + maxItems: 1 + avdd-supply: true dvdd-supply: true - reg: true required: - compatible + - reg - avdd-supply - dvdd-supply - - reg - reset-gpios - port - backlight diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml index e8c8ee8d7c88..7edd29df4bbb 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml @@ -22,7 +22,9 @@ properties: # Toppoly TD043MTEA1 Panel - tpo,td043mtea1 - reg: true + reg: + maxItems: 1 + label: true reset-gpios: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml index f0243d196191..59a373728e62 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml @@ -52,7 +52,8 @@ properties: - const: tpo,tpg110 - const: tpo,tpg110 - reg: true + reg: + maxItems: 1 grestb-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index 772399067515..30047a62fc11 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -20,7 +20,8 @@ properties: compatible: const: visionox,rm69299-1080p-display - reg: true + reg: + maxItems: 1 vdda-supply: description: | diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index c407deb6afb1..9c9743a23500 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: xinpeng,xpp055c272 - reg: true + + reg: + maxItems: 1 + backlight: true port: true reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml new file mode 100644 index 000000000000..dda9097a7911 --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5-dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5250/Exynos5420 SoC Display Port + +maintainers: + - Inki Dae + - Seung-Woo Kim + - Kyungmin Park + - Krzysztof Kozlowski + +properties: + compatible: + const: samsung,exynos5-dp + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dp + + display-timings: + $ref: /schemas/display/panel/display-timings.yaml# + + interrupts: + maxItems: 1 + + hpd-gpios: + description: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + + phys: + maxItems: 1 + + phy-names: + items: + - const: dp + + power-domains: + maxItems: 1 + + interlaced: + type: boolean + deprecated: true + description: + Interlace scan mode. Progressive if defined, interlaced if not defined. + + vsync-active-high: + type: boolean + deprecated: true + description: + VSYNC polarity configuration. High if defined, low if not defined + + hsync-active-high: + type: boolean + deprecated: true + description: + HSYNC polarity configuration. High if defined, low if not defined + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a dp-connector node. + + required: + - port + + samsung,hpd-gpios: + maxItems: 1 + deprecated: true + + samsung,ycbcr-coeff: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,dynamic-range: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,color-space: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,color-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,link-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + + samsung,lane-count: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - phys + - phy-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + dp-controller@145b0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x1000>; + clocks = <&clock CLK_DP>; + clock-names = "dp"; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + phys = <&dp_phy>; + phy-names = "dp"; + pinctrl-0 = <&dp_hpd>; + pinctrl-names = "default"; + power-domains = <&pd_disp1>; + + samsung,color-space = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml index 5b1769c19b17..418c168b223b 100644 --- a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml +++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml @@ -784,7 +784,7 @@ patternProperties: gpio-2: GPIO4 allOf: - - $ref: ../pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pincfg-node.yaml# properties: drive-open-drain: true diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml index 83603180d8d9..f49b43f45f3d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -25,12 +25,12 @@ properties: - const: allwinner,sun6i-a31-sc-nmi deprecated: true - const: allwinner,sun7i-a20-sc-nmi - - items: - - const: allwinner,sun8i-v3s-nmi - - const: allwinner,sun9i-a80-nmi - const: allwinner,sun9i-a80-nmi - items: - - const: allwinner,sun50i-a100-nmi + - enum: + - allwinner,sun8i-v3s-nmi + - allwinner,sun50i-a100-nmi + - allwinner,sun50i-h616-nmi - const: allwinner,sun9i-a80-nmi reg: diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml index e1a379c052e4..123d24b05556 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml @@ -48,7 +48,7 @@ properties: interrupt-controller: true "#interrupt-cells": - $ref: "arm,gic.yaml#/properties/#interrupt-cells" + $ref: arm,gic.yaml#/properties/#interrupt-cells required: - reg diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index b417341fc8ae..fb3c29e81349 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -39,6 +39,7 @@ properties: - renesas,intc-ex-r8a779a0 # R-Car V3U - renesas,intc-ex-r8a779f0 # R-Car S4-8 - renesas,intc-ex-r8a779g0 # R-Car V4H + - renesas,intc-ex-r8a779h0 # R-Car V4M - const: renesas,irqc '#interrupt-cells': diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml index c0d83d755239..9801de3ed84e 100644 --- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml +++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml @@ -44,7 +44,7 @@ patternProperties: description: Each vpu encoder or decoder correspond a MU, which used for communication between driver and firmware. Implement via mailbox on driver. - $ref: ../mailbox/fsl,mu.yaml# + $ref: /schemas/mailbox/fsl,mu.yaml# "^vpu-core@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index ee442ecb11cd..bbb56216a4e2 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -48,8 +48,8 @@ patternProperties: type: object allOf: - - $ref: ../nvmem/nvmem.yaml# - - $ref: ../nvmem/nvmem-deprecated-cells.yaml# + - $ref: /schemas/nvmem/nvmem.yaml# + - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml index bf6cbc7c2ba3..90611b598d2b 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml @@ -29,39 +29,39 @@ properties: allowable by a module in the slot, in milli-Watts. Presently, modules can be up to 1W, 1.5W or 2W. - "mod-def0-gpios": + mod-def0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module presence input gpio signal, active (module absent) high. Must not be present for SFF modules - "los-gpios": + los-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Receiver Loss of Signal Indication input gpio signal, active (signal lost) high - "tx-fault-gpios": + tx-fault-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Module Transmitter Fault input gpio signal, active (fault condition) high - "tx-disable-gpios": + tx-disable-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Transmitter Disable output gpio signal, active (Tx disable) high - "rate-select0-gpios": + rate-select0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0) output gpio signal, low - low Rx rate, high - high Rx rate Must not be present for SFF modules - "rate-select1-gpios": + rate-select1-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1) diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml index f7a3c2636355..e8212a05b7b1 100644 --- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -65,7 +65,8 @@ properties: - const: msi ranges: - maxItems: 1 + minItems: 1 + maxItems: 3 dma-ranges: minItems: 1 diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml index 9eb6e457b07f..2a4cc41fc710 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml @@ -71,28 +71,6 @@ properties: items: - const: pci -oneOf: - - properties: - interrupts: - maxItems: 1 - interrupt-names: - items: - - const: msi - - - properties: - interrupts: - minItems: 8 - interrupt-names: - items: - - const: msi0 - - const: msi1 - - const: msi2 - - const: msi3 - - const: msi4 - - const: msi5 - - const: msi6 - - const: msi7 - allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index 4734be456bde..c41344f8a242 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -48,13 +48,16 @@ properties: interrupt-controller: description: Interrupt controller node for handling legacy PCI interrupts. type: object + additionalProperties: false + properties: "#address-cells": const: 0 + "#interrupt-cells": const: 1 - "interrupt-controller": true - additionalProperties: false + + interrupt-controller: true required: - reg diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml index 426f90a47f35..cbe832c23dae 100644 --- a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml @@ -84,7 +84,7 @@ properties: "#interrupt-cells": const: 1 - "interrupt-controller": true + interrupt-controller: true required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml index 8467c8e6368c..439bda142764 100644 --- a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml +++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml @@ -59,14 +59,14 @@ patternProperties: "#phy-cells": const: 0 - "brcm,enable-ssc": + brcm,enable-ssc: $ref: /schemas/types.yaml#/definitions/flag description: | Use spread spectrum clocking (SSC) on this port This property is not applicable for "brcm,iproc-ns2-sata-phy", "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". - "brcm,rxaeq-mode": + brcm,rxaeq-mode: $ref: /schemas/types.yaml#/definitions/string description: String that indicates the desired RX equalizer mode. @@ -75,7 +75,7 @@ patternProperties: - auto - manual - "brcm,rxaeq-value": + brcm,rxaeq-value: $ref: /schemas/types.yaml#/definitions/uint32 description: | When 'brcm,rxaeq-mode' is set to "manual", provides the RX @@ -83,7 +83,7 @@ patternProperties: minimum: 0 maximum: 63 - "brcm,tx-amplitude-millivolt": + brcm,tx-amplitude-millivolt: description: | Transmit amplitude voltage in millivolt. $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml index 0f29c75f42ea..dddea27596e9 100644 --- a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml +++ b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml @@ -24,7 +24,7 @@ properties: type: object properties: - "SW": + SW: type: object $ref: regulator.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml index 7a105551fa6a..4171f524a928 100644 --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml @@ -23,7 +23,9 @@ properties: oneOf: - const: fsl,s32v234-linflexuart - items: - - const: nxp,s32g2-linflexuart + - enum: + - nxp,s32g2-linflexuart + - nxp,s32g3-linflexuart - const: fsl,s32v234-linflexuart reg: diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml index b86f6f53ca95..7140c312d898 100644 --- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml @@ -365,9 +365,9 @@ allOf: additionalProperties: false dependencies: - "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] - "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] - "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] + nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"] + nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"] examples: - | diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml index a0be1755ea28..5e09c04da30e 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml @@ -103,6 +103,7 @@ properties: - renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U - renesas,r8a779f0-cmt0 # 32-bit CMT0 on R-Car S4-8 - renesas,r8a779g0-cmt0 # 32-bit CMT0 on R-Car V4H + - renesas,r8a779h0-cmt0 # 32-bit CMT0 on R-Car V4M - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4 - items: @@ -110,6 +111,7 @@ properties: - renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U - renesas,r8a779f0-cmt1 # 48-bit CMT on R-Car S4-8 - renesas,r8a779g0-cmt1 # 48-bit CMT on R-Car V4H + - renesas,r8a779h0-cmt1 # 48-bit CMT on R-Car V4M - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4 reg: diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml index 84bbe15028a1..360a5cf1ae9c 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml @@ -39,6 +39,7 @@ properties: - renesas,tmu-r8a779a0 # R-Car V3U - renesas,tmu-r8a779f0 # R-Car S4-8 - renesas,tmu-r8a779g0 # R-Car V4H + - renesas,tmu-r8a779h0 # R-Car V4M - const: renesas,tmu reg: diff --git a/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml b/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml index 50a3fd31241c..8b0d3d4be5d8 100644 --- a/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml +++ b/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml @@ -33,13 +33,13 @@ properties: reg: maxItems: 1 - 'ibm,#dma-address-cells': + ibm,#dma-address-cells: description: number of cells that are used to encode the physical address field of dma-window properties $ref: /schemas/types.yaml#/definitions/uint32-array - 'ibm,#dma-size-cells': + ibm,#dma-size-cells: description: number of cells that are used to encode the size field of dma-window properties diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml index 924fd3d748a8..ef3143f4b794 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -29,6 +29,7 @@ properties: - mediatek,mt7623-xhci - mediatek,mt7629-xhci - mediatek,mt7986-xhci + - mediatek,mt7988-xhci - mediatek,mt8173-xhci - mediatek,mt8183-xhci - mediatek,mt8186-xhci diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml new file mode 100644 index 000000000000..be78a9865584 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed watchdog timer controllers + +maintainers: + - Andrew Jeffery + +properties: + compatible: + enum: + - aspeed,ast2400-wdt + - aspeed,ast2500-wdt + - aspeed,ast2600-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: > + The clock used to drive the watchdog counter. From the AST2500 no source + other than the 1MHz clock can be selected, so the clocks property is + optional. + + aspeed,reset-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - cpu + - soc + - system + - none + default: system + description: > + The watchdog can be programmed to generate one of three different types of + reset when a timeout occcurs. + + Specifying 'cpu' will only reset the processor on a timeout event. + + Specifying 'soc' will reset a configurable subset of the SoC's controllers + on a timeout event. Controllers critical to the SoC's operation may remain + untouched. The set of SoC controllers to reset may be specified via the + aspeed,reset-mask property if the node has the aspeed,ast2500-wdt or + aspeed,ast2600-wdt compatible. + + Specifying 'system' will reset all controllers on a timeout event, as if + EXTRST had been asserted. + + Specifying 'none' will cause the timeout event to have no reset effect. + Another watchdog engine on the chip must be used for chip reset operations. + + aspeed,alt-boot: + $ref: /schemas/types.yaml#/definitions/flag + description: > + Direct the watchdog to configure the SoC to boot from the alternative boot + region if a timeout occurs. + + aspeed,external-signal: + $ref: /schemas/types.yaml#/definitions/flag + description: > + Assert the timeout event on an external signal pin associated with the + watchdog controller instance. The pin must be muxed appropriately. + + aspeed,ext-pulse-duration: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + The duration, in microseconds, of the pulse emitted on the external signal + pin. + + aspeed,ext-push-pull: + $ref: /schemas/types.yaml#/definitions/flag + description: > + If aspeed,external-signal is specified in the node, set the external + signal pin's drive type to push-pull. If aspeed,ext-push-pull is not + specified then the pin is configured as open-drain. + + aspeed,ext-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: > + If both aspeed,external-signal and aspeed,ext-push-pull are specified in + the node, set the pulse polarity to active-high. If aspeed,ext-active-high + is not specified then the pin is configured as active-low. + + aspeed,reset-mask: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + description: > + A bitmask indicating which peripherals will be reset if the watchdog + timer expires. On AST2500 SoCs this should be a single word defined using + the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word + array with the first word defined using the AST2600_WDT_RESET1_* macros, + and the second word defined using the AST2600_WDT_RESET2_* macros. + +required: + - compatible + - reg + +allOf: + - if: + anyOf: + - required: + - aspeed,ext-push-pull + - required: + - aspeed,ext-active-high + - required: + - aspeed,reset-mask + then: + properties: + compatible: + enum: + - aspeed,ast2500-wdt + - aspeed,ast2600-wdt + - if: + required: + - aspeed,ext-active-high + then: + required: + - aspeed,ext-push-pull + +additionalProperties: false + +examples: + - | + watchdog@1e785000 { + compatible = "aspeed,ast2400-wdt"; + reg = <0x1e785000 0x1c>; + aspeed,reset-type = "system"; + aspeed,external-signal; + }; + - | + #include + watchdog@1e785040 { + compatible = "aspeed,ast2600-wdt"; + reg = <0x1e785040 0x40>; + aspeed,reset-type = "soc"; + aspeed,reset-mask = ; + }; diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt deleted file mode 100644 index 3208adb3e52e..000000000000 --- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt +++ /dev/null @@ -1,73 +0,0 @@ -Aspeed Watchdog Timer - -Required properties: - - compatible: must be one of: - - "aspeed,ast2400-wdt" - - "aspeed,ast2500-wdt" - - "aspeed,ast2600-wdt" - - - reg: physical base address of the controller and length of memory mapped - region - -Optional properties: - - - aspeed,reset-type = "cpu|soc|system|none" - - Reset behavior - Whenever a timeout occurs the watchdog can be programmed - to generate one of three different, mutually exclusive, types of resets. - - Type "none" can be specified to indicate that no resets are to be done. - This is useful in situations where another watchdog engine on chip is - to perform the reset. - - If 'aspeed,reset-type=' is not specified the default is to enable system - reset. - - Reset types: - - - cpu: Reset CPU on watchdog timeout - - - soc: Reset 'System on Chip' on watchdog timeout - - - system: Reset system on watchdog timeout - - - none: No reset is performed on timeout. Assumes another watchdog - engine is responsible for this. - - - aspeed,alt-boot: If property is present then boot from alternate block. - - aspeed,external-signal: If property is present then signal is sent to - external reset counter (only WDT1 and WDT2). If not - specified no external signal is sent. - - aspeed,ext-pulse-duration: External signal pulse duration in microseconds - -Optional properties for AST2500-compatible watchdogs: - - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's - drive type to push-pull. The default is open-drain. - - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin - is configured as push-pull, then set the pulse - polarity to active-high. The default is active-low. - -Optional properties for AST2500- and AST2600-compatible watchdogs: - - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if - the watchdog timer expires. On AST2500 this should be a - single word defined using the AST2500_WDT_RESET_* macros; - on AST2600 this should be a two-word array with the first - word defined using the AST2600_WDT_RESET1_* macros and the - second word defined using the AST2600_WDT_RESET2_* macros. - -Examples: - - wdt1: watchdog@1e785000 { - compatible = "aspeed,ast2400-wdt"; - reg = <0x1e785000 0x1c>; - aspeed,reset-type = "system"; - aspeed,external-signal; - }; - - #include - wdt2: watchdog@1e785040 { - compatible = "aspeed,ast2600-wdt"; - reg = <0x1e785040 0x40>; - aspeed,reset-mask = ; - }; diff --git a/drivers/of/address.c b/drivers/of/address.c index ae46a3605904..d669ce25b5f9 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -486,34 +486,30 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, * device that had registered logical PIO mapping, and the return code is * relative to that node. */ -static u64 __of_translate_address(struct device_node *dev, +static u64 __of_translate_address(struct device_node *node, struct device_node *(*get_parent)(const struct device_node *), const __be32 *in_addr, const char *rprop, struct device_node **host) { - struct device_node *parent = NULL; + struct device_node *dev __free(device_node) = of_node_get(node); + struct device_node *parent __free(device_node) = get_parent(dev); struct of_bus *bus, *pbus; __be32 addr[OF_MAX_ADDR_CELLS]; int na, ns, pna, pns; - u64 result = OF_BAD_ADDR; pr_debug("** translation for device %pOF **\n", dev); - /* Increase refcount at current level */ - of_node_get(dev); - *host = NULL; - /* Get parent & match bus type */ - parent = get_parent(dev); + if (parent == NULL) - goto bail; + return OF_BAD_ADDR; bus = of_match_bus(parent); /* Count address cells & copy address locally */ bus->count_cells(dev, &na, &ns); if (!OF_CHECK_COUNTS(na, ns)) { pr_debug("Bad cell count for %pOF\n", dev); - goto bail; + return OF_BAD_ADDR; } memcpy(addr, in_addr, na * 4); @@ -533,8 +529,7 @@ static u64 __of_translate_address(struct device_node *dev, /* If root, we have finished */ if (parent == NULL) { pr_debug("reached root node\n"); - result = of_read_number(addr, na); - break; + return of_read_number(addr, na); } /* @@ -543,11 +538,11 @@ static u64 __of_translate_address(struct device_node *dev, */ iorange = find_io_range_by_fwnode(&dev->fwnode); if (iorange && (iorange->flags != LOGIC_PIO_CPU_MMIO)) { - result = of_read_number(addr + 1, na - 1); + u64 result = of_read_number(addr + 1, na - 1); pr_debug("indirectIO matched(%pOF) 0x%llx\n", dev, result); - *host = of_node_get(dev); - break; + *host = no_free_ptr(dev); + return result; } /* Get new parent bus and counts */ @@ -555,7 +550,7 @@ static u64 __of_translate_address(struct device_node *dev, pbus->count_cells(dev, &pna, &pns); if (!OF_CHECK_COUNTS(pna, pns)) { pr_err("Bad cell count for %pOF\n", dev); - break; + return OF_BAD_ADDR; } pr_debug("parent bus is %s (na=%d, ns=%d) on %pOF\n", @@ -563,7 +558,7 @@ static u64 __of_translate_address(struct device_node *dev, /* Apply bus translation */ if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop)) - break; + return OF_BAD_ADDR; /* Complete the move up one level */ na = pna; @@ -572,11 +567,8 @@ static u64 __of_translate_address(struct device_node *dev, of_dump_addr("one level translation:", addr, na); } - bail: - of_node_put(parent); - of_node_put(dev); - return result; + unreachable(); } u64 of_translate_address(struct device_node *dev, const __be32 *in_addr) @@ -654,19 +646,16 @@ EXPORT_SYMBOL(of_translate_dma_address); const __be32 *of_translate_dma_region(struct device_node *dev, const __be32 *prop, phys_addr_t *start, size_t *length) { - struct device_node *parent; + struct device_node *parent __free(device_node) = __of_get_dma_parent(dev); u64 address, size; int na, ns; - parent = __of_get_dma_parent(dev); if (!parent) return NULL; na = of_bus_n_addr_cells(parent); ns = of_bus_n_size_cells(parent); - of_node_put(parent); - address = of_translate_dma_address(dev, prop); if (address == OF_BAD_ADDR) return NULL; @@ -688,21 +677,19 @@ const __be32 *__of_get_address(struct device_node *dev, int index, int bar_no, { const __be32 *prop; unsigned int psize; - struct device_node *parent; + struct device_node *parent __free(device_node) = of_get_parent(dev); struct of_bus *bus; int onesize, i, na, ns; - /* Get parent & match bus type */ - parent = of_get_parent(dev); if (parent == NULL) return NULL; + + /* match the parent's bus type */ bus = of_match_bus(parent); - if (strcmp(bus->name, "pci") && (bar_no >= 0)) { - of_node_put(parent); + if (strcmp(bus->name, "pci") && (bar_no >= 0)) return NULL; - } + bus->count_cells(dev, &na, &ns); - of_node_put(parent); if (!OF_CHECK_ADDR_COUNT(na)) return NULL; @@ -888,14 +875,13 @@ static u64 of_translate_ioport(struct device_node *dev, const __be32 *in_addr, */ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map) { - struct device_node *node = of_node_get(np); + struct device_node *node __free(device_node) = of_node_get(np); const __be32 *ranges = NULL; bool found_dma_ranges = false; struct of_range_parser parser; struct of_range range; struct bus_dma_region *r; int len, num_ranges = 0; - int ret = 0; while (node) { ranges = of_get_property(node, "dma-ranges", &len); @@ -905,10 +891,9 @@ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map) break; /* Once we find 'dma-ranges', then a missing one is an error */ - if (found_dma_ranges && !ranges) { - ret = -ENODEV; - goto out; - } + if (found_dma_ranges && !ranges) + return -ENODEV; + found_dma_ranges = true; node = of_get_next_dma_parent(node); @@ -916,10 +901,8 @@ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map) if (!node || !ranges) { pr_debug("no dma-ranges found for node(%pOF)\n", np); - ret = -ENODEV; - goto out; + return -ENODEV; } - of_dma_range_parser_init(&parser, node); for_each_of_range(&parser, &range) { if (range.cpu_addr == OF_BAD_ADDR) { @@ -930,16 +913,12 @@ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map) num_ranges++; } - if (!num_ranges) { - ret = -EINVAL; - goto out; - } + if (!num_ranges) + return -EINVAL; r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL); - if (!r) { - ret = -ENOMEM; - goto out; - } + if (!r) + return -ENOMEM; /* * Record all info in the generic DMA ranges array for struct device, @@ -957,9 +936,7 @@ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map) r->size = range.size; r++; } -out: - of_node_put(node); - return ret; + return 0; } #endif /* CONFIG_HAS_DMA */ @@ -1016,24 +993,18 @@ phys_addr_t __init of_dma_get_max_cpu_address(struct device_node *np) */ bool of_dma_is_coherent(struct device_node *np) { - struct device_node *node; - bool is_coherent = dma_default_coherent; - - node = of_node_get(np); + struct device_node *node __free(device_node) = of_node_get(np); while (node) { - if (of_property_read_bool(node, "dma-coherent")) { - is_coherent = true; - break; - } - if (of_property_read_bool(node, "dma-noncoherent")) { - is_coherent = false; - break; - } + if (of_property_read_bool(node, "dma-coherent")) + return true; + + if (of_property_read_bool(node, "dma-noncoherent")) + return false; + node = of_get_next_dma_parent(node); } - of_node_put(node); - return is_coherent; + return dma_default_coherent; } EXPORT_SYMBOL_GPL(of_dma_is_coherent); @@ -1049,20 +1020,14 @@ EXPORT_SYMBOL_GPL(of_dma_is_coherent); */ static bool of_mmio_is_nonposted(struct device_node *np) { - struct device_node *parent; - bool nonposted; - if (!IS_ENABLED(CONFIG_ARCH_APPLE)) return false; - parent = of_get_parent(np); + struct device_node *parent __free(device_node) = of_get_parent(np); if (!parent) return false; - nonposted = of_property_read_bool(parent, "nonposted-mmio"); - - of_node_put(parent); - return nonposted; + return of_property_read_bool(parent, "nonposted-mmio"); } static int __of_address_to_resource(struct device_node *dev, int index, int bar_no, diff --git a/drivers/of/base.c b/drivers/of/base.c index 8856c67c466a..20603d3c9931 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -16,6 +16,7 @@ #define pr_fmt(fmt) "OF: " fmt +#include #include #include #include @@ -1393,8 +1394,10 @@ int of_parse_phandle_with_args_map(const struct device_node *np, const char *stem_name, int index, struct of_phandle_args *out_args) { - char *cells_name, *map_name = NULL, *mask_name = NULL; - char *pass_name = NULL; + char *cells_name __free(kfree) = kasprintf(GFP_KERNEL, "#%s-cells", stem_name); + char *map_name __free(kfree) = kasprintf(GFP_KERNEL, "%s-map", stem_name); + char *mask_name __free(kfree) = kasprintf(GFP_KERNEL, "%s-map-mask", stem_name); + char *pass_name __free(kfree) = kasprintf(GFP_KERNEL, "%s-map-pass-thru", stem_name); struct device_node *cur, *new = NULL; const __be32 *map, *mask, *pass; static const __be32 dummy_mask[] = { [0 ... MAX_PHANDLE_ARGS] = cpu_to_be32(~0) }; @@ -1407,27 +1410,13 @@ int of_parse_phandle_with_args_map(const struct device_node *np, if (index < 0) return -EINVAL; - cells_name = kasprintf(GFP_KERNEL, "#%s-cells", stem_name); - if (!cells_name) + if (!cells_name || !map_name || !mask_name || !pass_name) return -ENOMEM; - ret = -ENOMEM; - map_name = kasprintf(GFP_KERNEL, "%s-map", stem_name); - if (!map_name) - goto free; - - mask_name = kasprintf(GFP_KERNEL, "%s-map-mask", stem_name); - if (!mask_name) - goto free; - - pass_name = kasprintf(GFP_KERNEL, "%s-map-pass-thru", stem_name); - if (!pass_name) - goto free; - ret = __of_parse_phandle_with_args(np, list_name, cells_name, -1, index, out_args); if (ret) - goto free; + return ret; /* Get the #-cells property */ cur = out_args->np; @@ -1444,8 +1433,7 @@ int of_parse_phandle_with_args_map(const struct device_node *np, /* Get the -map property */ map = of_get_property(cur, map_name, &map_len); if (!map) { - ret = 0; - goto free; + return 0; } map_len /= sizeof(u32); @@ -1521,12 +1509,6 @@ int of_parse_phandle_with_args_map(const struct device_node *np, put: of_node_put(cur); of_node_put(new); -free: - kfree(mask_name); - kfree(map_name); - kfree(cells_name); - kfree(pass_name); - return ret; } EXPORT_SYMBOL(of_parse_phandle_with_args_map); diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c index 4d57a4e34105..dda6092e6d3a 100644 --- a/drivers/of/dynamic.c +++ b/drivers/of/dynamic.c @@ -9,6 +9,7 @@ #define pr_fmt(fmt) "OF: " fmt +#include #include #include #include @@ -306,15 +307,20 @@ int of_detach_node(struct device_node *np) } EXPORT_SYMBOL_GPL(of_detach_node); +void __of_prop_free(struct property *prop) +{ + kfree(prop->name); + kfree(prop->value); + kfree(prop); +} + static void property_list_free(struct property *prop_list) { struct property *prop, *next; for (prop = prop_list; prop != NULL; prop = next) { next = prop->next; - kfree(prop->name); - kfree(prop->value); - kfree(prop); + __of_prop_free(prop); } } @@ -427,9 +433,7 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags) return new; err_free: - kfree(new->name); - kfree(new->value); - kfree(new); + __of_prop_free(new); return NULL; } @@ -471,9 +475,7 @@ struct device_node *__of_node_dup(const struct device_node *np, if (!new_pp) goto err_prop; if (__of_add_property(node, new_pp)) { - kfree(new_pp->name); - kfree(new_pp->value); - kfree(new_pp); + __of_prop_free(new_pp); goto err_prop; } } @@ -933,11 +935,8 @@ static int of_changeset_add_prop_helper(struct of_changeset *ocs, return -ENOMEM; ret = of_changeset_add_property(ocs, np, new_pp); - if (ret) { - kfree(new_pp->name); - kfree(new_pp->value); - kfree(new_pp); - } + if (ret) + __of_prop_free(new_pp); return ret; } @@ -1033,10 +1032,9 @@ int of_changeset_add_prop_u32_array(struct of_changeset *ocs, const u32 *array, size_t sz) { struct property prop; - __be32 *val; - int i, ret; + __be32 *val __free(kfree) = kcalloc(sz, sizeof(__be32), GFP_KERNEL); + int i; - val = kcalloc(sz, sizeof(__be32), GFP_KERNEL); if (!val) return -ENOMEM; @@ -1046,9 +1044,6 @@ int of_changeset_add_prop_u32_array(struct of_changeset *ocs, prop.length = sizeof(u32) * sz; prop.value = (void *)val; - ret = of_changeset_add_prop_helper(ocs, np, &prop); - kfree(val); - - return ret; + return of_changeset_add_prop_helper(ocs, np, &prop); } EXPORT_SYMBOL_GPL(of_changeset_add_prop_u32_array); diff --git a/drivers/of/module.c b/drivers/of/module.c index f58e624953a2..780fd82a7ecc 100644 --- a/drivers/of/module.c +++ b/drivers/of/module.c @@ -29,14 +29,15 @@ ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len) csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T', of_node_get_device_type(np)); tsize = csize; + if (csize >= len) + csize = len > 0 ? len - 1 : 0; len -= csize; - if (str) - str += csize; + str += csize; of_property_for_each_string(np, "compatible", p, compat) { csize = strlen(compat) + 1; tsize += csize; - if (csize > len) + if (csize >= len) continue; csize = snprintf(str, len, "C%s", compat); diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index 485483524b7f..94fc0aa07af9 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -123,6 +123,7 @@ extern void *__unflatten_device_tree(const void *blob, * own the devtree lock or work on detached trees only. */ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags); +void __of_prop_free(struct property *prop); struct device_node *__of_node_dup(const struct device_node *np, const char *full_name); diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index 8236ecae2953..46e1c3fbc769 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -437,17 +437,10 @@ void __init fdt_init_reserved_mem(void) for (i = 0; i < reserved_mem_count; i++) { struct reserved_mem *rmem = &reserved_mem[i]; unsigned long node = rmem->fdt_node; - int len; - const __be32 *prop; int err = 0; bool nomap; nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL; - prop = of_get_flat_dt_prop(node, "phandle", &len); - if (!prop) - prop = of_get_flat_dt_prop(node, "linux,phandle", &len); - if (prop) - rmem->phandle = of_read_number(prop, len/4); if (rmem->size == 0) err = __reserved_mem_alloc_size(node, rmem->name, @@ -477,19 +470,6 @@ void __init fdt_init_reserved_mem(void) } } -static inline struct reserved_mem *__find_rmem(struct device_node *node) -{ - unsigned int i; - - if (!node->phandle) - return NULL; - - for (i = 0; i < reserved_mem_count; i++) - if (reserved_mem[i].phandle == node->phandle) - return &reserved_mem[i]; - return NULL; -} - struct rmem_assigned_device { struct device *dev; struct reserved_mem *rmem; @@ -534,7 +514,7 @@ int of_reserved_mem_device_init_by_idx(struct device *dev, return 0; } - rmem = __find_rmem(target); + rmem = of_reserved_mem_lookup(target); of_node_put(target); if (!rmem || !rmem->ops || !rmem->ops->device_init) diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index 2ae7e9d24a64..4d861a75d694 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -262,9 +262,7 @@ static struct property *dup_and_fixup_symbol_prop( return new_prop; err_free_new_prop: - kfree(new_prop->name); - kfree(new_prop->value); - kfree(new_prop); + __of_prop_free(new_prop); err_free_target_path: kfree(target_path); @@ -361,11 +359,8 @@ static int add_changeset_property(struct overlay_changeset *ovcs, pr_err("WARNING: memory leak will occur if overlay removed, property: %pOF/%s\n", target->np, new_prop->name); - if (ret) { - kfree(new_prop->name); - kfree(new_prop->value); - kfree(new_prop); - } + if (ret) + __of_prop_free(new_prop); return ret; } diff --git a/drivers/of/property.c b/drivers/of/property.c index 0320f1ae9b4d..1c83e68f805b 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -40,15 +40,12 @@ */ bool of_graph_is_present(const struct device_node *node) { - struct device_node *ports, *port; + struct device_node *ports __free(device_node) = of_get_child_by_name(node, "ports"); - ports = of_get_child_by_name(node, "ports"); if (ports) node = ports; - port = of_get_child_by_name(node, "port"); - of_node_put(ports); - of_node_put(port); + struct device_node *port __free(device_node) = of_get_child_by_name(node, "port"); return !!port; } @@ -579,7 +576,8 @@ EXPORT_SYMBOL_GPL(of_prop_next_string); int of_graph_parse_endpoint(const struct device_node *node, struct of_endpoint *endpoint) { - struct device_node *port_node = of_get_parent(node); + struct device_node *port_node __free(device_node) = + of_get_parent(node); WARN_ONCE(!port_node, "%s(): endpoint %pOF has no parent node\n", __func__, node); @@ -594,8 +592,6 @@ int of_graph_parse_endpoint(const struct device_node *node, of_property_read_u32(port_node, "reg", &endpoint->port); of_property_read_u32(node, "reg", &endpoint->id); - of_node_put(port_node); - return 0; } EXPORT_SYMBOL(of_graph_parse_endpoint); @@ -610,25 +606,22 @@ EXPORT_SYMBOL(of_graph_parse_endpoint); */ struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id) { - struct device_node *node, *port; + struct device_node *node __free(device_node) = of_get_child_by_name(parent, "ports"); - node = of_get_child_by_name(parent, "ports"); if (node) parent = node; - for_each_child_of_node(parent, port) { + for_each_child_of_node_scoped(parent, port) { u32 port_id = 0; if (!of_node_name_eq(port, "port")) continue; of_property_read_u32(port, "reg", &port_id); if (id == port_id) - break; + return_ptr(port); } - of_node_put(node); - - return port; + return NULL; } EXPORT_SYMBOL(of_graph_get_port_by_id); @@ -655,15 +648,13 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent, * parent port node. */ if (!prev) { - struct device_node *node; + struct device_node *node __free(device_node) = + of_get_child_by_name(parent, "ports"); - node = of_get_child_by_name(parent, "ports"); if (node) parent = node; port = of_get_child_by_name(parent, "port"); - of_node_put(node); - if (!port) { pr_debug("graph: no port node found in %pOF\n", parent); return NULL; @@ -1052,15 +1043,13 @@ static int of_fwnode_graph_parse_endpoint(const struct fwnode_handle *fwnode, struct fwnode_endpoint *endpoint) { const struct device_node *node = to_of_node(fwnode); - struct device_node *port_node = of_get_parent(node); + struct device_node *port_node __free(device_node) = of_get_parent(node); endpoint->local_fwnode = fwnode; of_property_read_u32(port_node, "reg", &endpoint->port); of_property_read_u32(node, "reg", &endpoint->id); - of_node_put(port_node); - return 0; } @@ -1254,6 +1243,7 @@ DEFINE_SIMPLE_PROP(msi_parent, "msi-parent", "#msi-cells") DEFINE_SIMPLE_PROP(post_init_providers, "post-init-providers", NULL) DEFINE_SIMPLE_PROP(access_controllers, "access-controllers", "#access-controller-cells") DEFINE_SIMPLE_PROP(pses, "pses", "#pse-cells") +DEFINE_SIMPLE_PROP(power_supplies, "power-supplies", NULL) DEFINE_SUFFIX_PROP(regulators, "-supply", NULL) DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells") @@ -1313,6 +1303,57 @@ static struct device_node *parse_interrupts(struct device_node *np, return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np; } +static struct device_node *parse_interrupt_map(struct device_node *np, + const char *prop_name, int index) +{ + const __be32 *imap, *imap_end, *addr; + struct of_phandle_args sup_args; + u32 addrcells, intcells; + int i, imaplen; + + if (!IS_ENABLED(CONFIG_OF_IRQ)) + return NULL; + + if (strcmp(prop_name, "interrupt-map")) + return NULL; + + if (of_property_read_u32(np, "#interrupt-cells", &intcells)) + return NULL; + addrcells = of_bus_n_addr_cells(np); + + imap = of_get_property(np, "interrupt-map", &imaplen); + if (!imap || imaplen <= (addrcells + intcells)) + return NULL; + imap_end = imap + imaplen; + + while (imap < imap_end) { + addr = imap; + imap += addrcells; + + sup_args.np = np; + sup_args.args_count = intcells; + for (i = 0; i < intcells; i++) + sup_args.args[i] = be32_to_cpu(imap[i]); + imap += intcells; + + /* + * Upon success, the function of_irq_parse_raw() returns + * interrupt controller DT node pointer in sup_args.np. + */ + if (of_irq_parse_raw(addr, &sup_args)) + return NULL; + + if (!index) + return sup_args.np; + + of_node_put(sup_args.np); + imap += sup_args.args_count + 1; + index--; + } + + return NULL; +} + static struct device_node *parse_remote_endpoint(struct device_node *np, const char *prop_name, int index) @@ -1360,8 +1401,10 @@ static const struct supplier_bindings of_supplier_bindings[] = { { .parse_prop = parse_panel, }, { .parse_prop = parse_msi_parent, }, { .parse_prop = parse_pses, }, + { .parse_prop = parse_power_supplies, }, { .parse_prop = parse_gpio_compat, }, { .parse_prop = parse_interrupts, }, + { .parse_prop = parse_interrupt_map, }, { .parse_prop = parse_access_controllers, }, { .parse_prop = parse_regulators, }, { .parse_prop = parse_gpio, }, diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c index b278ab4338ce..2780928764a4 100644 --- a/drivers/of/resolver.c +++ b/drivers/of/resolver.c @@ -8,6 +8,7 @@ #define pr_fmt(fmt) "OF: resolver: " fmt +#include #include #include #include @@ -74,11 +75,11 @@ static int update_usages_of_a_phandle_reference(struct device_node *overlay, { struct device_node *refnode; struct property *prop; - char *value, *cur, *end, *node_path, *prop_name, *s; + char *value __free(kfree) = kmemdup(prop_fixup->value, prop_fixup->length, GFP_KERNEL); + char *cur, *end, *node_path, *prop_name, *s; int offset, len; int err = 0; - value = kmemdup(prop_fixup->value, prop_fixup->length, GFP_KERNEL); if (!value) return -ENOMEM; @@ -89,23 +90,19 @@ static int update_usages_of_a_phandle_reference(struct device_node *overlay, node_path = cur; s = strchr(cur, ':'); - if (!s) { - err = -EINVAL; - goto err_fail; - } + if (!s) + return -EINVAL; *s++ = '\0'; prop_name = s; s = strchr(s, ':'); - if (!s) { - err = -EINVAL; - goto err_fail; - } + if (!s) + return -EINVAL; *s++ = '\0'; err = kstrtoint(s, 10, &offset); if (err) - goto err_fail; + return err; refnode = __of_find_node_by_full_path(of_node_get(overlay), node_path); if (!refnode) @@ -117,22 +114,16 @@ static int update_usages_of_a_phandle_reference(struct device_node *overlay, } of_node_put(refnode); - if (!prop) { - err = -ENOENT; - goto err_fail; - } + if (!prop) + return -ENOENT; - if (offset < 0 || offset + sizeof(__be32) > prop->length) { - err = -EINVAL; - goto err_fail; - } + if (offset < 0 || offset + sizeof(__be32) > prop->length) + return -EINVAL; *(__be32 *)(prop->value + offset) = cpu_to_be32(phandle); } -err_fail: - kfree(value); - return err; + return 0; } /* compare nodes taking into account that 'name' strips out the @ part */ diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 6b5c36b6a758..a8c01c953a29 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -795,15 +795,11 @@ static void __init of_unittest_property_copy(void) new = __of_prop_dup(&p1, GFP_KERNEL); unittest(new && propcmp(&p1, new), "empty property didn't copy correctly\n"); - kfree(new->value); - kfree(new->name); - kfree(new); + __of_prop_free(new); new = __of_prop_dup(&p2, GFP_KERNEL); unittest(new && propcmp(&p2, new), "non-empty property didn't copy correctly\n"); - kfree(new->value); - kfree(new->name); - kfree(new); + __of_prop_free(new); #endif } @@ -3718,9 +3714,7 @@ static __init void of_unittest_overlay_high_level(void) goto err_unlock; } if (__of_add_property(of_symbols, new_prop)) { - kfree(new_prop->name); - kfree(new_prop->value); - kfree(new_prop); + __of_prop_free(new_prop); /* "name" auto-generated by unflatten */ if (!strcmp(prop->name, "name")) continue; diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h index 4de2a24cadc9..e338282da652 100644 --- a/include/linux/of_reserved_mem.h +++ b/include/linux/of_reserved_mem.h @@ -11,7 +11,6 @@ struct reserved_mem_ops; struct reserved_mem { const char *name; unsigned long fdt_node; - unsigned long phandle; const struct reserved_mem_ops *ops; phys_addr_t base; phys_addr_t size;