mirror of
https://github.com/torvalds/linux.git
synced 2024-09-20 06:53:04 +00:00
Devicetree for v6.10:
DT Bindings:
- Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings to
schemas
- Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0 irqc,
Renesas R-Car V4M TMU and CMT timers, Freescale S32G3 linflexuart, and
Mediatek MT7988 XHCI
- Add 'reg' constraints on DSI and SPI display panels
- More dropping of unnecessary quotes in schemas
- Use full paths rather than relative paths in schema $refs
- Drop redundant storing of phandle for reserved memory
DT Core:
- Use scope based cleanups for kfree() and of_node_put()
- Track interrupt-map and power-supplies for fw_devlink
- Add buffer overflow check in of_modalias()
- Add and use __of_prop_free() helper for freeing struct property
-----BEGIN PGP SIGNATURE-----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=tslW
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
to schemas
- Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
linflexuart, and Mediatek MT7988 XHCI
- Add 'reg' constraints on DSI and SPI display panels
- More dropping of unnecessary quotes in schemas
- Use full paths rather than relative paths in schema $refs
- Drop redundant storing of phandle for reserved memory
DT Core:
- Use scope based cleanups for kfree() and of_node_put()
- Track interrupt-map and power-supplies for fw_devlink
- Add buffer overflow check in of_modalias()
- Add and use __of_prop_free() helper for freeing struct property"
* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
of: property: Add fw_devlink support for interrupt-map property
dt-bindings: display: panel: constrain 'reg' in DSI panels
dt-bindings: display: panel: constrain 'reg' in SPI panels
dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
dt-bindings: Use full path to other schemas
dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
of: module: add buffer overflow check in of_modalias()
dt-bindings: PCI: microchip: increase number of items in ranges property
dt-bindings: Drop unnecessary quotes on keys
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
of: property: Use scope based cleanup on port_node
of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
of: property: fw_devlink: Add support for "power-supplies" binding
dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
dt-bindings: timer: renesas,tmu: Add R-Car V4M support
dt-bindings: timer: renesas,cmt: Add R-Car V4M support
of: Use scope based of_node_put() cleanups
of: Use scope based kfree() cleanups
...
This commit is contained in:
Linus Torvalds
commit
06f054b1fe
|
|
@ -0,0 +1,103 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Microchip's LCDC Display
|
||||
|
||||
maintainers:
|
||||
- Nicolas Ferre <nicolas.ferre@microchip.com>
|
||||
- Dharma Balasubiramani <dharma.b@microchip.com>
|
||||
|
||||
description:
|
||||
The LCD Controller (LCDC) consists of logic for transferring LCD image data
|
||||
from an external display buffer to a TFT LCD panel. The LCDC has one display
|
||||
input buffer per layer that fetches pixels through the single bus host
|
||||
interface and a look-up table to allow palletized display configurations. The
|
||||
LCDC is programmable on a per layer basis, and supports different LCD
|
||||
resolutions, window sizes, image formats and pixel depths.
|
||||
|
||||
# We need a select here since this schema is applicable only for nodes with the
|
||||
# following properties
|
||||
|
||||
select:
|
||||
anyOf:
|
||||
- required: [ 'atmel,dmacon' ]
|
||||
- required: [ 'atmel,lcdcon2' ]
|
||||
- required: [ 'atmel,guard-time' ]
|
||||
|
||||
properties:
|
||||
atmel,dmacon:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: dma controller configuration
|
||||
|
||||
atmel,lcdcon2:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: lcd controller configuration
|
||||
|
||||
atmel,guard-time:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: lcd guard time (Delay in frame periods)
|
||||
maximum: 127
|
||||
|
||||
bits-per-pixel:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: lcd panel bit-depth.
|
||||
enum: [1, 2, 4, 8, 16, 24, 32]
|
||||
|
||||
atmel,lcdcon-backlight:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: enable backlight
|
||||
|
||||
atmel,lcdcon-backlight-inverted:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: invert backlight PWM polarity
|
||||
|
||||
atmel,lcd-wiring-mode:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
description: lcd wiring mode "RGB" or "BRG"
|
||||
enum:
|
||||
- RGB
|
||||
- BRG
|
||||
|
||||
atmel,power-control-gpio:
|
||||
description: gpio to power on or off the LCD (as many as needed)
|
||||
maxItems: 1
|
||||
|
||||
display-timings:
|
||||
$ref: panel/display-timings.yaml#
|
||||
|
||||
required:
|
||||
- atmel,dmacon
|
||||
- atmel,lcdcon2
|
||||
- atmel,guard-time
|
||||
- bits-per-pixel
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
display: panel {
|
||||
bits-per-pixel = <32>;
|
||||
atmel,lcdcon-backlight;
|
||||
atmel,dmacon = <0x1>;
|
||||
atmel,lcdcon2 = <0x80008002>;
|
||||
atmel,guard-time = <9>;
|
||||
atmel,lcd-wiring-mode = "RGB";
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing0 {
|
||||
clock-frequency = <9000000>;
|
||||
hactive = <480>;
|
||||
vactive = <272>;
|
||||
hback-porch = <1>;
|
||||
hfront-porch = <1>;
|
||||
vback-porch = <40>;
|
||||
vfront-porch = <1>;
|
||||
hsync-len = <45>;
|
||||
vsync-len = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -1,87 +0,0 @@
|
|||
Atmel LCDC Framebuffer
|
||||
-----------------------------------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible :
|
||||
"atmel,at91sam9261-lcdc" ,
|
||||
"atmel,at91sam9263-lcdc" ,
|
||||
"atmel,at91sam9g10-lcdc" ,
|
||||
"atmel,at91sam9g45-lcdc" ,
|
||||
"atmel,at91sam9g45es-lcdc" ,
|
||||
"atmel,at91sam9rl-lcdc" ,
|
||||
- reg : Should contain 1 register ranges(address and length).
|
||||
Can contain an additional register range(address and length)
|
||||
for fixed framebuffer memory. Useful for dedicated memories.
|
||||
- interrupts : framebuffer controller interrupt
|
||||
- display: a phandle pointing to the display node
|
||||
|
||||
Required nodes:
|
||||
- display: a display node is required to initialize the lcd panel
|
||||
This should be in the board dts.
|
||||
- default-mode: a videomode within the display with timing parameters
|
||||
as specified below.
|
||||
|
||||
Optional properties:
|
||||
- lcd-supply: Regulator for LCD supply voltage.
|
||||
|
||||
Example:
|
||||
|
||||
fb0: fb@00500000 {
|
||||
compatible = "atmel,at91sam9g45-lcdc";
|
||||
reg = <0x00500000 0x1000>;
|
||||
interrupts = <23 3 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fb>;
|
||||
display = <&display0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
};
|
||||
|
||||
Example for fixed framebuffer memory:
|
||||
|
||||
fb0: fb@00500000 {
|
||||
compatible = "atmel,at91sam9263-lcdc";
|
||||
reg = <0x00700000 0x1000 0x70000000 0x200000>;
|
||||
[...]
|
||||
};
|
||||
|
||||
Atmel LCDC Display
|
||||
-----------------------------------------------------
|
||||
Required properties (as per of_videomode_helper):
|
||||
|
||||
- atmel,dmacon: dma controller configuration
|
||||
- atmel,lcdcon2: lcd controller configuration
|
||||
- atmel,guard-time: lcd guard time (Delay in frame periods)
|
||||
- bits-per-pixel: lcd panel bit-depth.
|
||||
|
||||
Optional properties (as per of_videomode_helper):
|
||||
- atmel,lcdcon-backlight: enable backlight
|
||||
- atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
|
||||
- atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
|
||||
- atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
|
||||
|
||||
Example:
|
||||
display0: display {
|
||||
bits-per-pixel = <32>;
|
||||
atmel,lcdcon-backlight;
|
||||
atmel,dmacon = <0x1>;
|
||||
atmel,lcdcon2 = <0x80008002>;
|
||||
atmel,guard-time = <9>;
|
||||
atmel,lcd-wiring-mode = <1>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing0 {
|
||||
clock-frequency = <9000000>;
|
||||
hactive = <480>;
|
||||
vactive = <272>;
|
||||
hback-porch = <1>;
|
||||
hfront-porch = <1>;
|
||||
vback-porch = <40>;
|
||||
vfront-porch = <1>;
|
||||
hsync-len = <45>;
|
||||
vsync-len = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
70
Documentation/devicetree/bindings/display/atmel,lcdc.yaml
Normal file
70
Documentation/devicetree/bindings/display/atmel,lcdc.yaml
Normal file
|
|
@ -0,0 +1,70 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/display/atmel,lcdc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Microchip's LCDC Framebuffer
|
||||
|
||||
maintainers:
|
||||
- Nicolas Ferre <nicolas.ferre@microchip.com>
|
||||
- Dharma Balasubiramani <dharma.b@microchip.com>
|
||||
|
||||
description:
|
||||
The LCDC works with a framebuffer, which is a section of memory that contains
|
||||
a complete frame of data representing pixel values for the display. The LCDC
|
||||
reads the pixel data from the framebuffer and sends it to the LCD panel to
|
||||
render the image.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- atmel,at91sam9261-lcdc
|
||||
- atmel,at91sam9263-lcdc
|
||||
- atmel,at91sam9g10-lcdc
|
||||
- atmel,at91sam9g45-lcdc
|
||||
- atmel,at91sam9g45es-lcdc
|
||||
- atmel,at91sam9rl-lcdc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 2
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: hclk
|
||||
- const: lcdc_clk
|
||||
|
||||
display:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: A phandle pointing to the display node.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
- clock-names
|
||||
- display
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/at91.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
fb@500000 {
|
||||
compatible = "atmel,at91sam9g45-lcdc";
|
||||
reg = <0x00500000 0x1000>;
|
||||
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fb>;
|
||||
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
|
||||
clock-names = "hclk", "lcdc_clk";
|
||||
display = <&display>;
|
||||
};
|
||||
|
|
@ -1,112 +0,0 @@
|
|||
The Exynos display port interface should be configured based on
|
||||
the type of panel connected to it.
|
||||
|
||||
We use two nodes:
|
||||
-dp-controller node
|
||||
-dptx-phy node(defined inside dp-controller node)
|
||||
|
||||
For the DP-PHY initialization, we use the dptx-phy node.
|
||||
Required properties for dptx-phy: deprecated, use phys and phy-names
|
||||
-reg: deprecated
|
||||
Base address of DP PHY register.
|
||||
-samsung,enable-mask: deprecated
|
||||
The bit-mask used to enable/disable DP PHY.
|
||||
|
||||
For the Panel initialization, we read data from dp-controller node.
|
||||
Required properties for dp-controller:
|
||||
-compatible:
|
||||
should be "samsung,exynos5-dp".
|
||||
-reg:
|
||||
physical base address of the controller and length
|
||||
of memory mapped region.
|
||||
-interrupts:
|
||||
interrupt combiner values.
|
||||
-clocks:
|
||||
from common clock binding: handle to dp clock.
|
||||
-clock-names:
|
||||
from common clock binding: Shall be "dp".
|
||||
-phys:
|
||||
from general PHY binding: the phandle for the PHY device.
|
||||
-phy-names:
|
||||
from general PHY binding: Should be "dp".
|
||||
|
||||
Optional properties for dp-controller:
|
||||
-interlaced:
|
||||
interlace scan mode.
|
||||
Progressive if defined, Interlaced if not defined
|
||||
-vsync-active-high:
|
||||
VSYNC polarity configuration.
|
||||
High if defined, Low if not defined
|
||||
-hsync-active-high:
|
||||
HSYNC polarity configuration.
|
||||
High if defined, Low if not defined
|
||||
-samsung,hpd-gpio:
|
||||
Hotplug detect GPIO.
|
||||
Indicates which GPIO should be used for hotplug
|
||||
detection
|
||||
-video interfaces: Device node can contain video interface port
|
||||
nodes according to [1].
|
||||
- display-timings: timings for the connected panel as described by
|
||||
Documentation/devicetree/bindings/display/panel/display-timing.txt
|
||||
|
||||
For the below properties, please refer to Analogix DP binding document:
|
||||
* Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
|
||||
-phys (required)
|
||||
-phy-names (required)
|
||||
-hpd-gpios (optional)
|
||||
force-hpd (optional)
|
||||
|
||||
Deprecated properties for DisplayPort:
|
||||
-interlaced: deprecated prop that can parsed from drm_display_mode.
|
||||
-vsync-active-high: deprecated prop that can parsed from drm_display_mode.
|
||||
-hsync-active-high: deprecated prop that can parsed from drm_display_mode.
|
||||
-samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode.
|
||||
-samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode.
|
||||
-samsung,color-space: deprecated prop that can parsed from drm_display_info.
|
||||
-samsung,color-depth: deprecated prop that can parsed from drm_display_info.
|
||||
-samsung,link-rate: deprecated prop that can reading from monitor by dpcd method.
|
||||
-samsung,lane-count: deprecated prop that can reading from monitor by dpcd method.
|
||||
-samsung,hpd-gpio: deprecated name for hpd-gpios.
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Example:
|
||||
|
||||
SOC specific portion:
|
||||
dp-controller {
|
||||
compatible = "samsung,exynos5-dp";
|
||||
reg = <0x145b0000 0x10000>;
|
||||
interrupts = <10 3>;
|
||||
interrupt-parent = <&combiner>;
|
||||
clocks = <&clock 342>;
|
||||
clock-names = "dp";
|
||||
|
||||
phys = <&dp_phy>;
|
||||
phy-names = "dp";
|
||||
};
|
||||
|
||||
Board Specific portion:
|
||||
dp-controller {
|
||||
display-timings {
|
||||
native-mode = <&lcd_timing>;
|
||||
lcd_timing: 1366x768 {
|
||||
clock-frequency = <70589280>;
|
||||
hactive = <1366>;
|
||||
vactive = <768>;
|
||||
hfront-porch = <40>;
|
||||
hback-porch = <40>;
|
||||
hsync-len = <32>;
|
||||
vback-porch = <10>;
|
||||
vfront-porch = <12>;
|
||||
vsync-len = <6>;
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
dp_out: endpoint {
|
||||
remote-endpoint = <&bridge_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -17,10 +17,12 @@ properties:
|
|||
compatible:
|
||||
const: abt,y030xx067a
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
port: true
|
||||
power-supply: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -21,7 +21,10 @@ allOf:
|
|||
properties:
|
||||
compatible:
|
||||
const: asus,z00t-tm5p5-n35596
|
||||
reg: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
vdd-supply:
|
||||
description: core voltage supply
|
||||
|
|
|
|||
|
|
@ -26,6 +26,9 @@ properties:
|
|||
compatible:
|
||||
const: boe,bf060y8m-aj0
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
elvdd-supply:
|
||||
description: EL Driving positive (VDD) supply (4.40-4.80V)
|
||||
elvss-supply:
|
||||
|
|
@ -38,7 +41,6 @@ properties:
|
|||
description: I/O voltage supply (1.62-1.98V)
|
||||
|
||||
port: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -18,9 +18,11 @@ properties:
|
|||
- const: boe,himax8279d8p
|
||||
- const: boe,himax8279d10p
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
enable-gpios: true
|
||||
reg: true
|
||||
|
||||
pp33-gpios:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -18,7 +18,9 @@ properties:
|
|||
# BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
|
||||
- boe,th101mb31ig002-28a
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
enable-gpios: true
|
||||
power-supply: true
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ properties:
|
|||
- starry,ili9882t
|
||||
|
||||
reg:
|
||||
description: the virtual channel number of a DSI peripheral
|
||||
maxItems: 1
|
||||
|
||||
enable-gpios:
|
||||
description: a GPIO spec for the enable pin
|
||||
|
|
|
|||
|
|
@ -15,7 +15,10 @@ allOf:
|
|||
properties:
|
||||
compatible:
|
||||
const: elida,kd35t133
|
||||
reg: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
port: true
|
||||
reset-gpios: true
|
||||
|
|
|
|||
|
|
@ -17,6 +17,9 @@ properties:
|
|||
compatible:
|
||||
const: fascontek,fs035vg158
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
spi-3wire: true
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -15,7 +15,10 @@ allOf:
|
|||
properties:
|
||||
compatible:
|
||||
const: feixin,k101-im2ba02
|
||||
reg: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
reset-gpios: true
|
||||
avdd-supply:
|
||||
|
|
|
|||
|
|
@ -21,6 +21,9 @@ properties:
|
|||
contains:
|
||||
const: djn,9a-3r063-1102b
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
vdd1-supply:
|
||||
description: Digital voltage rail
|
||||
|
||||
|
|
@ -30,7 +33,6 @@ properties:
|
|||
vsp-supply:
|
||||
description: Negative source voltage rail
|
||||
|
||||
reg: true
|
||||
port: true
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -26,7 +26,8 @@ properties:
|
|||
- powkiddy,x55-panel
|
||||
- const: himax,hx8394
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
|
||||
|
|
|
|||
|
|
@ -24,6 +24,9 @@ properties:
|
|||
- newhaven,1.8-128160EF
|
||||
- const: ilitek,ili9163
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
spi-max-frequency:
|
||||
maximum: 32000000
|
||||
|
||||
|
|
@ -32,7 +35,6 @@ properties:
|
|||
description: Display data/command selection (D/CX)
|
||||
|
||||
backlight: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
rotation: true
|
||||
|
||||
|
|
|
|||
|
|
@ -26,6 +26,9 @@ properties:
|
|||
- dlink,dir-685-panel
|
||||
- const: ilitek,ili9322
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
port: true
|
||||
|
||||
|
|
|
|||
|
|
@ -28,7 +28,8 @@ properties:
|
|||
- canaan,kd233-tft
|
||||
- const: ilitek,ili9341
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
dc-gpios:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -20,9 +20,11 @@ properties:
|
|||
- tianma,tm041xdhg01
|
||||
- const: ilitek,ili9805
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
avdd-supply: true
|
||||
dvdd-supply: true
|
||||
reg: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
|||
|
|
@ -24,9 +24,11 @@ properties:
|
|||
- wanchanglong,w552946aba
|
||||
- const: ilitek,ili9881c
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
power-supply: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
rotation: true
|
||||
|
||||
|
|
|
|||
|
|
@ -17,10 +17,12 @@ properties:
|
|||
compatible:
|
||||
const: innolux,ej030na
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
port: true
|
||||
power-supply: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -16,9 +16,11 @@ properties:
|
|||
compatible:
|
||||
const: innolux,p097pfg
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
enable-gpios: true
|
||||
reg: true
|
||||
|
||||
avdd-supply:
|
||||
description: The regulator that provides positive voltage
|
||||
|
|
|
|||
|
|
@ -21,7 +21,8 @@ properties:
|
|||
- radxa,display-8hd-ad002
|
||||
- const: jadard,jd9365da-h3
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
vdd-supply:
|
||||
description: supply regulator for VDD, usually 3.3V
|
||||
|
|
|
|||
|
|
@ -26,7 +26,9 @@ properties:
|
|||
compatible:
|
||||
const: jdi,lpm102a188a
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
enable-gpios: true
|
||||
reset-gpios: true
|
||||
power-supply: true
|
||||
|
|
|
|||
|
|
@ -16,8 +16,10 @@ properties:
|
|||
compatible:
|
||||
const: jdi,lt070me05000
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
enable-gpios: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
|
||||
vddp-supply:
|
||||
|
|
|
|||
|
|
@ -17,10 +17,12 @@ properties:
|
|||
compatible:
|
||||
const: kingdisplay,kd035g6-54nt
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
port: true
|
||||
power-supply: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
|
||||
spi-3wire: true
|
||||
|
|
|
|||
|
|
@ -18,6 +18,9 @@ properties:
|
|||
compatible:
|
||||
const: leadtek,ltk035c5444t
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
spi-3wire: true
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -18,7 +18,10 @@ properties:
|
|||
- leadtek,ltk050h3146w
|
||||
- leadtek,ltk050h3146w-a2
|
||||
- leadtek,ltk050h3148w
|
||||
reg: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
reset-gpios: true
|
||||
iovcc-supply:
|
||||
|
|
|
|||
|
|
@ -17,7 +17,10 @@ properties:
|
|||
enum:
|
||||
- leadtek,ltk101b4029w
|
||||
- leadtek,ltk500hd1829
|
||||
reg: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
reset-gpios: true
|
||||
iovcc-supply:
|
||||
|
|
|
|||
|
|
@ -21,7 +21,8 @@ properties:
|
|||
compatible:
|
||||
const: lg,lg4573
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
|||
|
|
@ -17,6 +17,9 @@ properties:
|
|||
compatible:
|
||||
const: lgphilips,lb035q02
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
label: true
|
||||
enable-gpios: true
|
||||
port: true
|
||||
|
|
|
|||
|
|
@ -21,9 +21,11 @@ properties:
|
|||
compatible:
|
||||
const: nec,nl8048hl11
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
label: true
|
||||
port: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
|
||||
spi-max-frequency:
|
||||
|
|
|
|||
|
|
@ -24,7 +24,9 @@ properties:
|
|||
- powkiddy,rk2023-panel
|
||||
- const: newvision,nv3051d
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
port: true
|
||||
reset-gpios:
|
||||
|
|
|
|||
|
|
@ -24,7 +24,10 @@ properties:
|
|||
string determines how the NT35510 panel driver shall be configured
|
||||
to work with the indicated panel. The novatek,nt35510 compatible shall
|
||||
always be provided as a fallback.
|
||||
reg: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
vdd-supply:
|
||||
description: regulator that supplies the vdd voltage
|
||||
|
|
|
|||
|
|
@ -33,6 +33,9 @@ properties:
|
|||
to work with the indicated panel. The novatek,nt35950 compatible shall
|
||||
always be provided as a fallback.
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
description: phandle of gpio for reset line - This should be 8mA, gpio
|
||||
|
|
@ -49,7 +52,6 @@ properties:
|
|||
|
||||
backlight: true
|
||||
ports: true
|
||||
reg: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
|||
|
|
@ -27,6 +27,9 @@ properties:
|
|||
- lenovo,j606f-boe-nt36523w
|
||||
- const: novatek,nt36523w
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
description: phandle of gpio for reset line - This should be 8mA
|
||||
|
|
@ -34,7 +37,6 @@ properties:
|
|||
vddio-supply:
|
||||
description: regulator that supplies the I/O voltage
|
||||
|
||||
reg: true
|
||||
rotation: true
|
||||
backlight: true
|
||||
|
||||
|
|
|
|||
|
|
@ -29,6 +29,9 @@ properties:
|
|||
determines how the NT36672A panel driver is configured for the indicated
|
||||
panel. The novatek,nt36672a compatible shall always be provided as a fallback.
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
description: phandle of gpio for reset line - This should be 8mA, gpio
|
||||
|
|
@ -44,7 +47,6 @@ properties:
|
|||
vddneg-supply:
|
||||
description: phandle of the negative boost supply regulator
|
||||
|
||||
reg: true
|
||||
port: true
|
||||
backlight: true
|
||||
|
||||
|
|
|
|||
|
|
@ -38,10 +38,12 @@ properties:
|
|||
compatible:
|
||||
const: olimex,lcd-olinuxino
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
enable-gpios: true
|
||||
power-supply: true
|
||||
reg: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
|||
|
|
@ -71,6 +71,9 @@ properties:
|
|||
- shineworld,lh133k
|
||||
- const: panel-mipi-dbi-spi
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
write-only:
|
||||
type: boolean
|
||||
description:
|
||||
|
|
|
|||
|
|
@ -16,7 +16,9 @@ properties:
|
|||
compatible:
|
||||
const: raydium,rm67191
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
port: true
|
||||
reset-gpios: true
|
||||
width-mm: true
|
||||
|
|
|
|||
|
|
@ -22,6 +22,9 @@ properties:
|
|||
- const: fairphone,fp5-rm692e5-boe
|
||||
- const: raydium,rm692e5
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
dvdd-supply:
|
||||
description: Digital voltage rail
|
||||
|
||||
|
|
@ -31,7 +34,6 @@ properties:
|
|||
vddio-supply:
|
||||
description: I/O voltage rail
|
||||
|
||||
reg: true
|
||||
port: true
|
||||
|
||||
required:
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@ properties:
|
|||
const: ronbo,rb070d30
|
||||
|
||||
reg:
|
||||
description: MIPI-DSI virtual channel
|
||||
maxItems: 1
|
||||
|
||||
power-gpios:
|
||||
description: GPIO used for the power pin
|
||||
|
|
|
|||
|
|
@ -33,7 +33,9 @@ properties:
|
|||
# Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
|
||||
- samsung,s6e3hf2
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
enable-gpios: true
|
||||
te-gpios: true
|
||||
|
|
|
|||
|
|
@ -11,12 +11,15 @@ maintainers:
|
|||
|
||||
allOf:
|
||||
- $ref: panel-common.yaml#
|
||||
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: samsung,ams495qa01
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
description: reset gpio, must be GPIO_ACTIVE_LOW
|
||||
elvdd-supply:
|
||||
|
|
|
|||
|
|
@ -17,9 +17,11 @@ properties:
|
|||
compatible:
|
||||
const: samsung,ld9040
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
display-timings: true
|
||||
port: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
|
||||
vdd3-supply:
|
||||
|
|
|
|||
|
|
@ -21,7 +21,8 @@ properties:
|
|||
compatible:
|
||||
const: samsung,lms380kf01
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
description: provides an optional ESD (electrostatic discharge)
|
||||
|
|
|
|||
|
|
@ -20,7 +20,8 @@ properties:
|
|||
compatible:
|
||||
const: samsung,lms397kf04
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
|
||||
|
|
|
|||
|
|
@ -16,8 +16,10 @@ properties:
|
|||
compatible:
|
||||
const: samsung,s6d16d0
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
port: true
|
||||
reg: true
|
||||
reset-gpios: true
|
||||
|
||||
vdd1-supply:
|
||||
|
|
|
|||
|
|
@ -20,7 +20,8 @@ properties:
|
|||
compatible:
|
||||
const: samsung,s6d27a1
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
description: provides an optional ESD (electrostatic discharge)
|
||||
|
|
|
|||
|
|
@ -24,7 +24,8 @@ properties:
|
|||
- samsung,ltl101at01
|
||||
- const: samsung,s6d7aa0
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight:
|
||||
description:
|
||||
|
|
|
|||
|
|
@ -18,7 +18,9 @@ properties:
|
|||
compatible:
|
||||
const: samsung,s6e63m0
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
port: true
|
||||
default-brightness: true
|
||||
|
|
|
|||
|
|
@ -15,7 +15,10 @@ allOf:
|
|||
properties:
|
||||
compatible:
|
||||
const: samsung,s6e88a0-ams452ef01
|
||||
reg: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
port: true
|
||||
reset-gpios: true
|
||||
vdd3-supply:
|
||||
|
|
|
|||
|
|
@ -16,7 +16,9 @@ properties:
|
|||
compatible:
|
||||
const: samsung,s6e8aa0
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
display-timings: true
|
||||
|
||||
|
|
|
|||
|
|
@ -37,7 +37,9 @@ properties:
|
|||
- enum:
|
||||
- sharp,lq101r1sx01
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
power-supply: true
|
||||
backlight: true
|
||||
|
||||
|
|
|
|||
|
|
@ -16,7 +16,9 @@ properties:
|
|||
compatible:
|
||||
const: sharp,ls043t1le01-qhd
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
reset-gpios: true
|
||||
port: true
|
||||
|
|
|
|||
|
|
@ -16,7 +16,9 @@ properties:
|
|||
compatible:
|
||||
const: sharp,ls060t1sx01
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
reset-gpios: true
|
||||
port: true
|
||||
|
|
|
|||
|
|
@ -21,7 +21,9 @@ properties:
|
|||
- jasonic,jt240mhqs-hwt-ek-e3
|
||||
- sitronix,st7789v
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
power-supply: true
|
||||
backlight: true
|
||||
|
|
|
|||
|
|
@ -22,7 +22,10 @@ properties:
|
|||
enum:
|
||||
- sony,acx424akp
|
||||
- sony,acx424akm
|
||||
reg: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios: true
|
||||
vddi-supply:
|
||||
description: regulator that supplies the vddi voltage
|
||||
|
|
|
|||
|
|
@ -17,6 +17,9 @@ properties:
|
|||
compatible:
|
||||
const: sony,acx565akm
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
label: true
|
||||
reset-gpios: true
|
||||
port: true
|
||||
|
|
|
|||
|
|
@ -20,7 +20,8 @@ properties:
|
|||
compatible:
|
||||
const: sony,td4353-jdi-tama
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
width-mm: true
|
||||
|
|
|
|||
|
|
@ -21,7 +21,8 @@ properties:
|
|||
compatible:
|
||||
const: sony,tulip-truly-nt35521
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
positive5-supply:
|
||||
description: Positive 5V supply
|
||||
|
|
|
|||
|
|
@ -19,15 +19,17 @@ properties:
|
|||
- sharp,ls068b3sx02
|
||||
- const: syna,r63353
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
avdd-supply: true
|
||||
dvdd-supply: true
|
||||
reg: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- avdd-supply
|
||||
- dvdd-supply
|
||||
- reg
|
||||
- reset-gpios
|
||||
- port
|
||||
- backlight
|
||||
|
|
|
|||
|
|
@ -22,7 +22,9 @@ properties:
|
|||
# Toppoly TD043MTEA1 Panel
|
||||
- tpo,td043mtea1
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
label: true
|
||||
reset-gpios: true
|
||||
backlight: true
|
||||
|
|
|
|||
|
|
@ -52,7 +52,8 @@ properties:
|
|||
- const: tpo,tpg110
|
||||
- const: tpo,tpg110
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
grestb-gpios:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -20,7 +20,8 @@ properties:
|
|||
compatible:
|
||||
const: visionox,rm69299-1080p-display
|
||||
|
||||
reg: true
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
vdda-supply:
|
||||
description: |
|
||||
|
|
|
|||
|
|
@ -15,7 +15,10 @@ allOf:
|
|||
properties:
|
||||
compatible:
|
||||
const: xinpeng,xpp055c272
|
||||
reg: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight: true
|
||||
port: true
|
||||
reset-gpios: true
|
||||
|
|
|
|||
|
|
@ -0,0 +1,163 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5-dp.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Samsung Exynos5250/Exynos5420 SoC Display Port
|
||||
|
||||
maintainers:
|
||||
- Inki Dae <inki.dae@samsung.com>
|
||||
- Seung-Woo Kim <sw0312.kim@samsung.com>
|
||||
- Kyungmin Park <kyungmin.park@samsung.com>
|
||||
- Krzysztof Kozlowski <krzk@kernel.org>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: samsung,exynos5-dp
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: dp
|
||||
|
||||
display-timings:
|
||||
$ref: /schemas/display/panel/display-timings.yaml#
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
hpd-gpios:
|
||||
description:
|
||||
Hotplug detect GPIO.
|
||||
Indicates which GPIO should be used for hotplug detection
|
||||
|
||||
phys:
|
||||
maxItems: 1
|
||||
|
||||
phy-names:
|
||||
items:
|
||||
- const: dp
|
||||
|
||||
power-domains:
|
||||
maxItems: 1
|
||||
|
||||
interlaced:
|
||||
type: boolean
|
||||
deprecated: true
|
||||
description:
|
||||
Interlace scan mode. Progressive if defined, interlaced if not defined.
|
||||
|
||||
vsync-active-high:
|
||||
type: boolean
|
||||
deprecated: true
|
||||
description:
|
||||
VSYNC polarity configuration. High if defined, low if not defined
|
||||
|
||||
hsync-active-high:
|
||||
type: boolean
|
||||
deprecated: true
|
||||
description:
|
||||
HSYNC polarity configuration. High if defined, low if not defined
|
||||
|
||||
ports:
|
||||
$ref: /schemas/graph.yaml#/properties/ports
|
||||
|
||||
properties:
|
||||
port:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
description:
|
||||
Port node with one endpoint connected to a dp-connector node.
|
||||
|
||||
required:
|
||||
- port
|
||||
|
||||
samsung,hpd-gpios:
|
||||
maxItems: 1
|
||||
deprecated: true
|
||||
|
||||
samsung,ycbcr-coeff:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
deprecated: true
|
||||
description:
|
||||
Deprecated prop that can parsed from drm_display_mode.
|
||||
|
||||
samsung,dynamic-range:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
deprecated: true
|
||||
description:
|
||||
Deprecated prop that can parsed from drm_display_mode.
|
||||
|
||||
samsung,color-space:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
deprecated: true
|
||||
description:
|
||||
Deprecated prop that can parsed from drm_display_info.
|
||||
|
||||
samsung,color-depth:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
deprecated: true
|
||||
description:
|
||||
Deprecated prop that can parsed from drm_display_info.
|
||||
|
||||
samsung,link-rate:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
deprecated: true
|
||||
description:
|
||||
Deprecated prop that can reading from monitor by dpcd method.
|
||||
|
||||
samsung,lane-count:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
deprecated: true
|
||||
description:
|
||||
Deprecated prop that can reading from monitor by dpcd method.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- interrupts
|
||||
- phys
|
||||
- phy-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/exynos5250.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
dp-controller@145b0000 {
|
||||
compatible = "samsung,exynos5-dp";
|
||||
reg = <0x145b0000 0x1000>;
|
||||
clocks = <&clock CLK_DP>;
|
||||
clock-names = "dp";
|
||||
interrupts = <10 3>;
|
||||
interrupt-parent = <&combiner>;
|
||||
phys = <&dp_phy>;
|
||||
phy-names = "dp";
|
||||
pinctrl-0 = <&dp_hpd>;
|
||||
pinctrl-names = "default";
|
||||
power-domains = <&pd_disp1>;
|
||||
|
||||
samsung,color-space = <0>;
|
||||
samsung,color-depth = <1>;
|
||||
samsung,link-rate = <0x0a>;
|
||||
samsung,lane-count = <2>;
|
||||
hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
port {
|
||||
dp_out: endpoint {
|
||||
remote-endpoint = <&bridge_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -784,7 +784,7 @@ patternProperties:
|
|||
gpio-2: GPIO4
|
||||
|
||||
allOf:
|
||||
- $ref: ../pinctrl/pincfg-node.yaml#
|
||||
- $ref: /schemas/pinctrl/pincfg-node.yaml#
|
||||
|
||||
properties:
|
||||
drive-open-drain: true
|
||||
|
|
|
|||
|
|
@ -25,12 +25,12 @@ properties:
|
|||
- const: allwinner,sun6i-a31-sc-nmi
|
||||
deprecated: true
|
||||
- const: allwinner,sun7i-a20-sc-nmi
|
||||
- items:
|
||||
- const: allwinner,sun8i-v3s-nmi
|
||||
- const: allwinner,sun9i-a80-nmi
|
||||
- const: allwinner,sun9i-a80-nmi
|
||||
- items:
|
||||
- const: allwinner,sun50i-a100-nmi
|
||||
- enum:
|
||||
- allwinner,sun8i-v3s-nmi
|
||||
- allwinner,sun50i-a100-nmi
|
||||
- allwinner,sun50i-h616-nmi
|
||||
- const: allwinner,sun9i-a80-nmi
|
||||
|
||||
reg:
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ properties:
|
|||
interrupt-controller: true
|
||||
|
||||
"#interrupt-cells":
|
||||
$ref: "arm,gic.yaml#/properties/#interrupt-cells"
|
||||
$ref: arm,gic.yaml#/properties/#interrupt-cells
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@ properties:
|
|||
- renesas,intc-ex-r8a779a0 # R-Car V3U
|
||||
- renesas,intc-ex-r8a779f0 # R-Car S4-8
|
||||
- renesas,intc-ex-r8a779g0 # R-Car V4H
|
||||
- renesas,intc-ex-r8a779h0 # R-Car V4M
|
||||
- const: renesas,irqc
|
||||
|
||||
'#interrupt-cells':
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@ patternProperties:
|
|||
description:
|
||||
Each vpu encoder or decoder correspond a MU, which used for communication
|
||||
between driver and firmware. Implement via mailbox on driver.
|
||||
$ref: ../mailbox/fsl,mu.yaml#
|
||||
$ref: /schemas/mailbox/fsl,mu.yaml#
|
||||
|
||||
|
||||
"^vpu-core@[0-9a-f]+$":
|
||||
|
|
|
|||
|
|
@ -48,8 +48,8 @@ patternProperties:
|
|||
type: object
|
||||
|
||||
allOf:
|
||||
- $ref: ../nvmem/nvmem.yaml#
|
||||
- $ref: ../nvmem/nvmem-deprecated-cells.yaml#
|
||||
- $ref: /schemas/nvmem/nvmem.yaml#
|
||||
- $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
|
|
|
|||
|
|
@ -29,39 +29,39 @@ properties:
|
|||
allowable by a module in the slot, in milli-Watts. Presently, modules can
|
||||
be up to 1W, 1.5W or 2W.
|
||||
|
||||
"mod-def0-gpios":
|
||||
mod-def0-gpios:
|
||||
maxItems: 1
|
||||
description:
|
||||
GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module
|
||||
presence input gpio signal, active (module absent) high. Must not be
|
||||
present for SFF modules
|
||||
|
||||
"los-gpios":
|
||||
los-gpios:
|
||||
maxItems: 1
|
||||
description:
|
||||
GPIO phandle and a specifier of the Receiver Loss of Signal Indication
|
||||
input gpio signal, active (signal lost) high
|
||||
|
||||
"tx-fault-gpios":
|
||||
tx-fault-gpios:
|
||||
maxItems: 1
|
||||
description:
|
||||
GPIO phandle and a specifier of the Module Transmitter Fault input gpio
|
||||
signal, active (fault condition) high
|
||||
|
||||
"tx-disable-gpios":
|
||||
tx-disable-gpios:
|
||||
maxItems: 1
|
||||
description:
|
||||
GPIO phandle and a specifier of the Transmitter Disable output gpio
|
||||
signal, active (Tx disable) high
|
||||
|
||||
"rate-select0-gpios":
|
||||
rate-select0-gpios:
|
||||
maxItems: 1
|
||||
description:
|
||||
GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0)
|
||||
output gpio signal, low - low Rx rate, high - high Rx rate Must not be
|
||||
present for SFF modules
|
||||
|
||||
"rate-select1-gpios":
|
||||
rate-select1-gpios:
|
||||
maxItems: 1
|
||||
description:
|
||||
GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)
|
||||
|
|
|
|||
|
|
@ -65,7 +65,8 @@ properties:
|
|||
- const: msi
|
||||
|
||||
ranges:
|
||||
maxItems: 1
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
|
||||
dma-ranges:
|
||||
minItems: 1
|
||||
|
|
|
|||
|
|
@ -71,28 +71,6 @@ properties:
|
|||
items:
|
||||
- const: pci
|
||||
|
||||
oneOf:
|
||||
- properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: msi
|
||||
|
||||
- properties:
|
||||
interrupts:
|
||||
minItems: 8
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: msi0
|
||||
- const: msi1
|
||||
- const: msi2
|
||||
- const: msi3
|
||||
- const: msi4
|
||||
- const: msi5
|
||||
- const: msi6
|
||||
- const: msi7
|
||||
|
||||
allOf:
|
||||
- $ref: qcom,pcie-common.yaml#
|
||||
|
||||
|
|
|
|||
|
|
@ -48,13 +48,16 @@ properties:
|
|||
interrupt-controller:
|
||||
description: Interrupt controller node for handling legacy PCI interrupts.
|
||||
type: object
|
||||
additionalProperties: false
|
||||
|
||||
properties:
|
||||
"#address-cells":
|
||||
const: 0
|
||||
|
||||
"#interrupt-cells":
|
||||
const: 1
|
||||
"interrupt-controller": true
|
||||
additionalProperties: false
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
|
|
|||
|
|
@ -84,7 +84,7 @@ properties:
|
|||
"#interrupt-cells":
|
||||
const: 1
|
||||
|
||||
"interrupt-controller": true
|
||||
interrupt-controller: true
|
||||
|
||||
required:
|
||||
- "#address-cells"
|
||||
|
|
|
|||
|
|
@ -59,14 +59,14 @@ patternProperties:
|
|||
"#phy-cells":
|
||||
const: 0
|
||||
|
||||
"brcm,enable-ssc":
|
||||
brcm,enable-ssc:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: |
|
||||
Use spread spectrum clocking (SSC) on this port
|
||||
This property is not applicable for "brcm,iproc-ns2-sata-phy",
|
||||
"brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
|
||||
|
||||
"brcm,rxaeq-mode":
|
||||
brcm,rxaeq-mode:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
description:
|
||||
String that indicates the desired RX equalizer mode.
|
||||
|
|
@ -75,7 +75,7 @@ patternProperties:
|
|||
- auto
|
||||
- manual
|
||||
|
||||
"brcm,rxaeq-value":
|
||||
brcm,rxaeq-value:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
When 'brcm,rxaeq-mode' is set to "manual", provides the RX
|
||||
|
|
@ -83,7 +83,7 @@ patternProperties:
|
|||
minimum: 0
|
||||
maximum: 63
|
||||
|
||||
"brcm,tx-amplitude-millivolt":
|
||||
brcm,tx-amplitude-millivolt:
|
||||
description: |
|
||||
Transmit amplitude voltage in millivolt.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ properties:
|
|||
type: object
|
||||
|
||||
properties:
|
||||
"SW":
|
||||
SW:
|
||||
type: object
|
||||
$ref: regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
|
|
|||
|
|
@ -23,7 +23,9 @@ properties:
|
|||
oneOf:
|
||||
- const: fsl,s32v234-linflexuart
|
||||
- items:
|
||||
- const: nxp,s32g2-linflexuart
|
||||
- enum:
|
||||
- nxp,s32g2-linflexuart
|
||||
- nxp,s32g3-linflexuart
|
||||
- const: fsl,s32v234-linflexuart
|
||||
|
||||
reg:
|
||||
|
|
|
|||
|
|
@ -365,9 +365,9 @@ allOf:
|
|||
additionalProperties: false
|
||||
|
||||
dependencies:
|
||||
"nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
|
||||
"nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
|
||||
"nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
|
||||
nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
|
||||
nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"]
|
||||
nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"]
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
|
|
|||
|
|
@ -103,6 +103,7 @@ properties:
|
|||
- renesas,r8a779a0-cmt0 # 32-bit CMT0 on R-Car V3U
|
||||
- renesas,r8a779f0-cmt0 # 32-bit CMT0 on R-Car S4-8
|
||||
- renesas,r8a779g0-cmt0 # 32-bit CMT0 on R-Car V4H
|
||||
- renesas,r8a779h0-cmt0 # 32-bit CMT0 on R-Car V4M
|
||||
- const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
|
||||
|
||||
- items:
|
||||
|
|
@ -110,6 +111,7 @@ properties:
|
|||
- renesas,r8a779a0-cmt1 # 48-bit CMT on R-Car V3U
|
||||
- renesas,r8a779f0-cmt1 # 48-bit CMT on R-Car S4-8
|
||||
- renesas,r8a779g0-cmt1 # 48-bit CMT on R-Car V4H
|
||||
- renesas,r8a779h0-cmt1 # 48-bit CMT on R-Car V4M
|
||||
- const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
|
||||
|
||||
reg:
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@ properties:
|
|||
- renesas,tmu-r8a779a0 # R-Car V3U
|
||||
- renesas,tmu-r8a779f0 # R-Car S4-8
|
||||
- renesas,tmu-r8a779g0 # R-Car V4H
|
||||
- renesas,tmu-r8a779h0 # R-Car V4M
|
||||
- const: renesas,tmu
|
||||
|
||||
reg:
|
||||
|
|
|
|||
|
|
@ -33,13 +33,13 @@ properties:
|
|||
reg:
|
||||
maxItems: 1
|
||||
|
||||
'ibm,#dma-address-cells':
|
||||
ibm,#dma-address-cells:
|
||||
description:
|
||||
number of cells that are used to encode the physical address field of
|
||||
dma-window properties
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
|
||||
'ibm,#dma-size-cells':
|
||||
ibm,#dma-size-cells:
|
||||
description:
|
||||
number of cells that are used to encode the size field of
|
||||
dma-window properties
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@ properties:
|
|||
- mediatek,mt7623-xhci
|
||||
- mediatek,mt7629-xhci
|
||||
- mediatek,mt7986-xhci
|
||||
- mediatek,mt7988-xhci
|
||||
- mediatek,mt8173-xhci
|
||||
- mediatek,mt8183-xhci
|
||||
- mediatek,mt8186-xhci
|
||||
|
|
|
|||
|
|
@ -0,0 +1,142 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Aspeed watchdog timer controllers
|
||||
|
||||
maintainers:
|
||||
- Andrew Jeffery <andrew@codeconstruct.com.au>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- aspeed,ast2400-wdt
|
||||
- aspeed,ast2500-wdt
|
||||
- aspeed,ast2600-wdt
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
description: >
|
||||
The clock used to drive the watchdog counter. From the AST2500 no source
|
||||
other than the 1MHz clock can be selected, so the clocks property is
|
||||
optional.
|
||||
|
||||
aspeed,reset-type:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
enum:
|
||||
- cpu
|
||||
- soc
|
||||
- system
|
||||
- none
|
||||
default: system
|
||||
description: >
|
||||
The watchdog can be programmed to generate one of three different types of
|
||||
reset when a timeout occcurs.
|
||||
|
||||
Specifying 'cpu' will only reset the processor on a timeout event.
|
||||
|
||||
Specifying 'soc' will reset a configurable subset of the SoC's controllers
|
||||
on a timeout event. Controllers critical to the SoC's operation may remain
|
||||
untouched. The set of SoC controllers to reset may be specified via the
|
||||
aspeed,reset-mask property if the node has the aspeed,ast2500-wdt or
|
||||
aspeed,ast2600-wdt compatible.
|
||||
|
||||
Specifying 'system' will reset all controllers on a timeout event, as if
|
||||
EXTRST had been asserted.
|
||||
|
||||
Specifying 'none' will cause the timeout event to have no reset effect.
|
||||
Another watchdog engine on the chip must be used for chip reset operations.
|
||||
|
||||
aspeed,alt-boot:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: >
|
||||
Direct the watchdog to configure the SoC to boot from the alternative boot
|
||||
region if a timeout occurs.
|
||||
|
||||
aspeed,external-signal:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: >
|
||||
Assert the timeout event on an external signal pin associated with the
|
||||
watchdog controller instance. The pin must be muxed appropriately.
|
||||
|
||||
aspeed,ext-pulse-duration:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: >
|
||||
The duration, in microseconds, of the pulse emitted on the external signal
|
||||
pin.
|
||||
|
||||
aspeed,ext-push-pull:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: >
|
||||
If aspeed,external-signal is specified in the node, set the external
|
||||
signal pin's drive type to push-pull. If aspeed,ext-push-pull is not
|
||||
specified then the pin is configured as open-drain.
|
||||
|
||||
aspeed,ext-active-high:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: >
|
||||
If both aspeed,external-signal and aspeed,ext-push-pull are specified in
|
||||
the node, set the pulse polarity to active-high. If aspeed,ext-active-high
|
||||
is not specified then the pin is configured as active-low.
|
||||
|
||||
aspeed,reset-mask:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
description: >
|
||||
A bitmask indicating which peripherals will be reset if the watchdog
|
||||
timer expires. On AST2500 SoCs this should be a single word defined using
|
||||
the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word
|
||||
array with the first word defined using the AST2600_WDT_RESET1_* macros,
|
||||
and the second word defined using the AST2600_WDT_RESET2_* macros.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
anyOf:
|
||||
- required:
|
||||
- aspeed,ext-push-pull
|
||||
- required:
|
||||
- aspeed,ext-active-high
|
||||
- required:
|
||||
- aspeed,reset-mask
|
||||
then:
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- aspeed,ast2500-wdt
|
||||
- aspeed,ast2600-wdt
|
||||
- if:
|
||||
required:
|
||||
- aspeed,ext-active-high
|
||||
then:
|
||||
required:
|
||||
- aspeed,ext-push-pull
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
watchdog@1e785000 {
|
||||
compatible = "aspeed,ast2400-wdt";
|
||||
reg = <0x1e785000 0x1c>;
|
||||
aspeed,reset-type = "system";
|
||||
aspeed,external-signal;
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/watchdog/aspeed-wdt.h>
|
||||
watchdog@1e785040 {
|
||||
compatible = "aspeed,ast2600-wdt";
|
||||
reg = <0x1e785040 0x40>;
|
||||
aspeed,reset-type = "soc";
|
||||
aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
|
||||
(AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
|
||||
};
|
||||
|
|
@ -1,73 +0,0 @@
|
|||
Aspeed Watchdog Timer
|
||||
|
||||
Required properties:
|
||||
- compatible: must be one of:
|
||||
- "aspeed,ast2400-wdt"
|
||||
- "aspeed,ast2500-wdt"
|
||||
- "aspeed,ast2600-wdt"
|
||||
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
region
|
||||
|
||||
Optional properties:
|
||||
|
||||
- aspeed,reset-type = "cpu|soc|system|none"
|
||||
|
||||
Reset behavior - Whenever a timeout occurs the watchdog can be programmed
|
||||
to generate one of three different, mutually exclusive, types of resets.
|
||||
|
||||
Type "none" can be specified to indicate that no resets are to be done.
|
||||
This is useful in situations where another watchdog engine on chip is
|
||||
to perform the reset.
|
||||
|
||||
If 'aspeed,reset-type=' is not specified the default is to enable system
|
||||
reset.
|
||||
|
||||
Reset types:
|
||||
|
||||
- cpu: Reset CPU on watchdog timeout
|
||||
|
||||
- soc: Reset 'System on Chip' on watchdog timeout
|
||||
|
||||
- system: Reset system on watchdog timeout
|
||||
|
||||
- none: No reset is performed on timeout. Assumes another watchdog
|
||||
engine is responsible for this.
|
||||
|
||||
- aspeed,alt-boot: If property is present then boot from alternate block.
|
||||
- aspeed,external-signal: If property is present then signal is sent to
|
||||
external reset counter (only WDT1 and WDT2). If not
|
||||
specified no external signal is sent.
|
||||
- aspeed,ext-pulse-duration: External signal pulse duration in microseconds
|
||||
|
||||
Optional properties for AST2500-compatible watchdogs:
|
||||
- aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
|
||||
drive type to push-pull. The default is open-drain.
|
||||
- aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
|
||||
is configured as push-pull, then set the pulse
|
||||
polarity to active-high. The default is active-low.
|
||||
|
||||
Optional properties for AST2500- and AST2600-compatible watchdogs:
|
||||
- aspeed,reset-mask: A bitmask indicating which peripherals will be reset if
|
||||
the watchdog timer expires. On AST2500 this should be a
|
||||
single word defined using the AST2500_WDT_RESET_* macros;
|
||||
on AST2600 this should be a two-word array with the first
|
||||
word defined using the AST2600_WDT_RESET1_* macros and the
|
||||
second word defined using the AST2600_WDT_RESET2_* macros.
|
||||
|
||||
Examples:
|
||||
|
||||
wdt1: watchdog@1e785000 {
|
||||
compatible = "aspeed,ast2400-wdt";
|
||||
reg = <0x1e785000 0x1c>;
|
||||
aspeed,reset-type = "system";
|
||||
aspeed,external-signal;
|
||||
};
|
||||
|
||||
#include <dt-bindings/watchdog/aspeed-wdt.h>
|
||||
wdt2: watchdog@1e785040 {
|
||||
compatible = "aspeed,ast2600-wdt";
|
||||
reg = <0x1e785040 0x40>;
|
||||
aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
|
||||
(AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
|
||||
};
|
||||
|
|
@ -486,34 +486,30 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
|
|||
* device that had registered logical PIO mapping, and the return code is
|
||||
* relative to that node.
|
||||
*/
|
||||
static u64 __of_translate_address(struct device_node *dev,
|
||||
static u64 __of_translate_address(struct device_node *node,
|
||||
struct device_node *(*get_parent)(const struct device_node *),
|
||||
const __be32 *in_addr, const char *rprop,
|
||||
struct device_node **host)
|
||||
{
|
||||
struct device_node *parent = NULL;
|
||||
struct device_node *dev __free(device_node) = of_node_get(node);
|
||||
struct device_node *parent __free(device_node) = get_parent(dev);
|
||||
struct of_bus *bus, *pbus;
|
||||
__be32 addr[OF_MAX_ADDR_CELLS];
|
||||
int na, ns, pna, pns;
|
||||
u64 result = OF_BAD_ADDR;
|
||||
|
||||
pr_debug("** translation for device %pOF **\n", dev);
|
||||
|
||||
/* Increase refcount at current level */
|
||||
of_node_get(dev);
|
||||
|
||||
*host = NULL;
|
||||
/* Get parent & match bus type */
|
||||
parent = get_parent(dev);
|
||||
|
||||
if (parent == NULL)
|
||||
goto bail;
|
||||
return OF_BAD_ADDR;
|
||||
bus = of_match_bus(parent);
|
||||
|
||||
/* Count address cells & copy address locally */
|
||||
bus->count_cells(dev, &na, &ns);
|
||||
if (!OF_CHECK_COUNTS(na, ns)) {
|
||||
pr_debug("Bad cell count for %pOF\n", dev);
|
||||
goto bail;
|
||||
return OF_BAD_ADDR;
|
||||
}
|
||||
memcpy(addr, in_addr, na * 4);
|
||||
|
||||
|
|
@ -533,8 +529,7 @@ static u64 __of_translate_address(struct device_node *dev,
|
|||
/* If root, we have finished */
|
||||
if (parent == NULL) {
|
||||
pr_debug("reached root node\n");
|
||||
result = of_read_number(addr, na);
|
||||
break;
|
||||
return of_read_number(addr, na);
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
@ -543,11 +538,11 @@ static u64 __of_translate_address(struct device_node *dev,
|
|||
*/
|
||||
iorange = find_io_range_by_fwnode(&dev->fwnode);
|
||||
if (iorange && (iorange->flags != LOGIC_PIO_CPU_MMIO)) {
|
||||
result = of_read_number(addr + 1, na - 1);
|
||||
u64 result = of_read_number(addr + 1, na - 1);
|
||||
pr_debug("indirectIO matched(%pOF) 0x%llx\n",
|
||||
dev, result);
|
||||
*host = of_node_get(dev);
|
||||
break;
|
||||
*host = no_free_ptr(dev);
|
||||
return result;
|
||||
}
|
||||
|
||||
/* Get new parent bus and counts */
|
||||
|
|
@ -555,7 +550,7 @@ static u64 __of_translate_address(struct device_node *dev,
|
|||
pbus->count_cells(dev, &pna, &pns);
|
||||
if (!OF_CHECK_COUNTS(pna, pns)) {
|
||||
pr_err("Bad cell count for %pOF\n", dev);
|
||||
break;
|
||||
return OF_BAD_ADDR;
|
||||
}
|
||||
|
||||
pr_debug("parent bus is %s (na=%d, ns=%d) on %pOF\n",
|
||||
|
|
@ -563,7 +558,7 @@ static u64 __of_translate_address(struct device_node *dev,
|
|||
|
||||
/* Apply bus translation */
|
||||
if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop))
|
||||
break;
|
||||
return OF_BAD_ADDR;
|
||||
|
||||
/* Complete the move up one level */
|
||||
na = pna;
|
||||
|
|
@ -572,11 +567,8 @@ static u64 __of_translate_address(struct device_node *dev,
|
|||
|
||||
of_dump_addr("one level translation:", addr, na);
|
||||
}
|
||||
bail:
|
||||
of_node_put(parent);
|
||||
of_node_put(dev);
|
||||
|
||||
return result;
|
||||
unreachable();
|
||||
}
|
||||
|
||||
u64 of_translate_address(struct device_node *dev, const __be32 *in_addr)
|
||||
|
|
@ -654,19 +646,16 @@ EXPORT_SYMBOL(of_translate_dma_address);
|
|||
const __be32 *of_translate_dma_region(struct device_node *dev, const __be32 *prop,
|
||||
phys_addr_t *start, size_t *length)
|
||||
{
|
||||
struct device_node *parent;
|
||||
struct device_node *parent __free(device_node) = __of_get_dma_parent(dev);
|
||||
u64 address, size;
|
||||
int na, ns;
|
||||
|
||||
parent = __of_get_dma_parent(dev);
|
||||
if (!parent)
|
||||
return NULL;
|
||||
|
||||
na = of_bus_n_addr_cells(parent);
|
||||
ns = of_bus_n_size_cells(parent);
|
||||
|
||||
of_node_put(parent);
|
||||
|
||||
address = of_translate_dma_address(dev, prop);
|
||||
if (address == OF_BAD_ADDR)
|
||||
return NULL;
|
||||
|
|
@ -688,21 +677,19 @@ const __be32 *__of_get_address(struct device_node *dev, int index, int bar_no,
|
|||
{
|
||||
const __be32 *prop;
|
||||
unsigned int psize;
|
||||
struct device_node *parent;
|
||||
struct device_node *parent __free(device_node) = of_get_parent(dev);
|
||||
struct of_bus *bus;
|
||||
int onesize, i, na, ns;
|
||||
|
||||
/* Get parent & match bus type */
|
||||
parent = of_get_parent(dev);
|
||||
if (parent == NULL)
|
||||
return NULL;
|
||||
|
||||
/* match the parent's bus type */
|
||||
bus = of_match_bus(parent);
|
||||
if (strcmp(bus->name, "pci") && (bar_no >= 0)) {
|
||||
of_node_put(parent);
|
||||
if (strcmp(bus->name, "pci") && (bar_no >= 0))
|
||||
return NULL;
|
||||
}
|
||||
|
||||
bus->count_cells(dev, &na, &ns);
|
||||
of_node_put(parent);
|
||||
if (!OF_CHECK_ADDR_COUNT(na))
|
||||
return NULL;
|
||||
|
||||
|
|
@ -888,14 +875,13 @@ static u64 of_translate_ioport(struct device_node *dev, const __be32 *in_addr,
|
|||
*/
|
||||
int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map)
|
||||
{
|
||||
struct device_node *node = of_node_get(np);
|
||||
struct device_node *node __free(device_node) = of_node_get(np);
|
||||
const __be32 *ranges = NULL;
|
||||
bool found_dma_ranges = false;
|
||||
struct of_range_parser parser;
|
||||
struct of_range range;
|
||||
struct bus_dma_region *r;
|
||||
int len, num_ranges = 0;
|
||||
int ret = 0;
|
||||
|
||||
while (node) {
|
||||
ranges = of_get_property(node, "dma-ranges", &len);
|
||||
|
|
@ -905,10 +891,9 @@ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map)
|
|||
break;
|
||||
|
||||
/* Once we find 'dma-ranges', then a missing one is an error */
|
||||
if (found_dma_ranges && !ranges) {
|
||||
ret = -ENODEV;
|
||||
goto out;
|
||||
}
|
||||
if (found_dma_ranges && !ranges)
|
||||
return -ENODEV;
|
||||
|
||||
found_dma_ranges = true;
|
||||
|
||||
node = of_get_next_dma_parent(node);
|
||||
|
|
@ -916,10 +901,8 @@ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map)
|
|||
|
||||
if (!node || !ranges) {
|
||||
pr_debug("no dma-ranges found for node(%pOF)\n", np);
|
||||
ret = -ENODEV;
|
||||
goto out;
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
of_dma_range_parser_init(&parser, node);
|
||||
for_each_of_range(&parser, &range) {
|
||||
if (range.cpu_addr == OF_BAD_ADDR) {
|
||||
|
|
@ -930,16 +913,12 @@ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map)
|
|||
num_ranges++;
|
||||
}
|
||||
|
||||
if (!num_ranges) {
|
||||
ret = -EINVAL;
|
||||
goto out;
|
||||
}
|
||||
if (!num_ranges)
|
||||
return -EINVAL;
|
||||
|
||||
r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL);
|
||||
if (!r) {
|
||||
ret = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
if (!r)
|
||||
return -ENOMEM;
|
||||
|
||||
/*
|
||||
* Record all info in the generic DMA ranges array for struct device,
|
||||
|
|
@ -957,9 +936,7 @@ int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map)
|
|||
r->size = range.size;
|
||||
r++;
|
||||
}
|
||||
out:
|
||||
of_node_put(node);
|
||||
return ret;
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_HAS_DMA */
|
||||
|
||||
|
|
@ -1016,24 +993,18 @@ phys_addr_t __init of_dma_get_max_cpu_address(struct device_node *np)
|
|||
*/
|
||||
bool of_dma_is_coherent(struct device_node *np)
|
||||
{
|
||||
struct device_node *node;
|
||||
bool is_coherent = dma_default_coherent;
|
||||
|
||||
node = of_node_get(np);
|
||||
struct device_node *node __free(device_node) = of_node_get(np);
|
||||
|
||||
while (node) {
|
||||
if (of_property_read_bool(node, "dma-coherent")) {
|
||||
is_coherent = true;
|
||||
break;
|
||||
}
|
||||
if (of_property_read_bool(node, "dma-noncoherent")) {
|
||||
is_coherent = false;
|
||||
break;
|
||||
}
|
||||
if (of_property_read_bool(node, "dma-coherent"))
|
||||
return true;
|
||||
|
||||
if (of_property_read_bool(node, "dma-noncoherent"))
|
||||
return false;
|
||||
|
||||
node = of_get_next_dma_parent(node);
|
||||
}
|
||||
of_node_put(node);
|
||||
return is_coherent;
|
||||
return dma_default_coherent;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(of_dma_is_coherent);
|
||||
|
||||
|
|
@ -1049,20 +1020,14 @@ EXPORT_SYMBOL_GPL(of_dma_is_coherent);
|
|||
*/
|
||||
static bool of_mmio_is_nonposted(struct device_node *np)
|
||||
{
|
||||
struct device_node *parent;
|
||||
bool nonposted;
|
||||
|
||||
if (!IS_ENABLED(CONFIG_ARCH_APPLE))
|
||||
return false;
|
||||
|
||||
parent = of_get_parent(np);
|
||||
struct device_node *parent __free(device_node) = of_get_parent(np);
|
||||
if (!parent)
|
||||
return false;
|
||||
|
||||
nonposted = of_property_read_bool(parent, "nonposted-mmio");
|
||||
|
||||
of_node_put(parent);
|
||||
return nonposted;
|
||||
return of_property_read_bool(parent, "nonposted-mmio");
|
||||
}
|
||||
|
||||
static int __of_address_to_resource(struct device_node *dev, int index, int bar_no,
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@
|
|||
|
||||
#define pr_fmt(fmt) "OF: " fmt
|
||||
|
||||
#include <linux/cleanup.h>
|
||||
#include <linux/console.h>
|
||||
#include <linux/ctype.h>
|
||||
#include <linux/cpu.h>
|
||||
|
|
@ -1393,8 +1394,10 @@ int of_parse_phandle_with_args_map(const struct device_node *np,
|
|||
const char *stem_name,
|
||||
int index, struct of_phandle_args *out_args)
|
||||
{
|
||||
char *cells_name, *map_name = NULL, *mask_name = NULL;
|
||||
char *pass_name = NULL;
|
||||
char *cells_name __free(kfree) = kasprintf(GFP_KERNEL, "#%s-cells", stem_name);
|
||||
char *map_name __free(kfree) = kasprintf(GFP_KERNEL, "%s-map", stem_name);
|
||||
char *mask_name __free(kfree) = kasprintf(GFP_KERNEL, "%s-map-mask", stem_name);
|
||||
char *pass_name __free(kfree) = kasprintf(GFP_KERNEL, "%s-map-pass-thru", stem_name);
|
||||
struct device_node *cur, *new = NULL;
|
||||
const __be32 *map, *mask, *pass;
|
||||
static const __be32 dummy_mask[] = { [0 ... MAX_PHANDLE_ARGS] = cpu_to_be32(~0) };
|
||||
|
|
@ -1407,27 +1410,13 @@ int of_parse_phandle_with_args_map(const struct device_node *np,
|
|||
if (index < 0)
|
||||
return -EINVAL;
|
||||
|
||||
cells_name = kasprintf(GFP_KERNEL, "#%s-cells", stem_name);
|
||||
if (!cells_name)
|
||||
if (!cells_name || !map_name || !mask_name || !pass_name)
|
||||
return -ENOMEM;
|
||||
|
||||
ret = -ENOMEM;
|
||||
map_name = kasprintf(GFP_KERNEL, "%s-map", stem_name);
|
||||
if (!map_name)
|
||||
goto free;
|
||||
|
||||
mask_name = kasprintf(GFP_KERNEL, "%s-map-mask", stem_name);
|
||||
if (!mask_name)
|
||||
goto free;
|
||||
|
||||
pass_name = kasprintf(GFP_KERNEL, "%s-map-pass-thru", stem_name);
|
||||
if (!pass_name)
|
||||
goto free;
|
||||
|
||||
ret = __of_parse_phandle_with_args(np, list_name, cells_name, -1, index,
|
||||
out_args);
|
||||
if (ret)
|
||||
goto free;
|
||||
return ret;
|
||||
|
||||
/* Get the #<list>-cells property */
|
||||
cur = out_args->np;
|
||||
|
|
@ -1444,8 +1433,7 @@ int of_parse_phandle_with_args_map(const struct device_node *np,
|
|||
/* Get the <list>-map property */
|
||||
map = of_get_property(cur, map_name, &map_len);
|
||||
if (!map) {
|
||||
ret = 0;
|
||||
goto free;
|
||||
return 0;
|
||||
}
|
||||
map_len /= sizeof(u32);
|
||||
|
||||
|
|
@ -1521,12 +1509,6 @@ int of_parse_phandle_with_args_map(const struct device_node *np,
|
|||
put:
|
||||
of_node_put(cur);
|
||||
of_node_put(new);
|
||||
free:
|
||||
kfree(mask_name);
|
||||
kfree(map_name);
|
||||
kfree(cells_name);
|
||||
kfree(pass_name);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL(of_parse_phandle_with_args_map);
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@
|
|||
|
||||
#define pr_fmt(fmt) "OF: " fmt
|
||||
|
||||
#include <linux/cleanup.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
|
@ -306,15 +307,20 @@ int of_detach_node(struct device_node *np)
|
|||
}
|
||||
EXPORT_SYMBOL_GPL(of_detach_node);
|
||||
|
||||
void __of_prop_free(struct property *prop)
|
||||
{
|
||||
kfree(prop->name);
|
||||
kfree(prop->value);
|
||||
kfree(prop);
|
||||
}
|
||||
|
||||
static void property_list_free(struct property *prop_list)
|
||||
{
|
||||
struct property *prop, *next;
|
||||
|
||||
for (prop = prop_list; prop != NULL; prop = next) {
|
||||
next = prop->next;
|
||||
kfree(prop->name);
|
||||
kfree(prop->value);
|
||||
kfree(prop);
|
||||
__of_prop_free(prop);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -427,9 +433,7 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags)
|
|||
return new;
|
||||
|
||||
err_free:
|
||||
kfree(new->name);
|
||||
kfree(new->value);
|
||||
kfree(new);
|
||||
__of_prop_free(new);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
|
|
@ -471,9 +475,7 @@ struct device_node *__of_node_dup(const struct device_node *np,
|
|||
if (!new_pp)
|
||||
goto err_prop;
|
||||
if (__of_add_property(node, new_pp)) {
|
||||
kfree(new_pp->name);
|
||||
kfree(new_pp->value);
|
||||
kfree(new_pp);
|
||||
__of_prop_free(new_pp);
|
||||
goto err_prop;
|
||||
}
|
||||
}
|
||||
|
|
@ -933,11 +935,8 @@ static int of_changeset_add_prop_helper(struct of_changeset *ocs,
|
|||
return -ENOMEM;
|
||||
|
||||
ret = of_changeset_add_property(ocs, np, new_pp);
|
||||
if (ret) {
|
||||
kfree(new_pp->name);
|
||||
kfree(new_pp->value);
|
||||
kfree(new_pp);
|
||||
}
|
||||
if (ret)
|
||||
__of_prop_free(new_pp);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -1033,10 +1032,9 @@ int of_changeset_add_prop_u32_array(struct of_changeset *ocs,
|
|||
const u32 *array, size_t sz)
|
||||
{
|
||||
struct property prop;
|
||||
__be32 *val;
|
||||
int i, ret;
|
||||
__be32 *val __free(kfree) = kcalloc(sz, sizeof(__be32), GFP_KERNEL);
|
||||
int i;
|
||||
|
||||
val = kcalloc(sz, sizeof(__be32), GFP_KERNEL);
|
||||
if (!val)
|
||||
return -ENOMEM;
|
||||
|
||||
|
|
@ -1046,9 +1044,6 @@ int of_changeset_add_prop_u32_array(struct of_changeset *ocs,
|
|||
prop.length = sizeof(u32) * sz;
|
||||
prop.value = (void *)val;
|
||||
|
||||
ret = of_changeset_add_prop_helper(ocs, np, &prop);
|
||||
kfree(val);
|
||||
|
||||
return ret;
|
||||
return of_changeset_add_prop_helper(ocs, np, &prop);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(of_changeset_add_prop_u32_array);
|
||||
|
|
|
|||
|
|
@ -29,14 +29,15 @@ ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len)
|
|||
csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T',
|
||||
of_node_get_device_type(np));
|
||||
tsize = csize;
|
||||
if (csize >= len)
|
||||
csize = len > 0 ? len - 1 : 0;
|
||||
len -= csize;
|
||||
if (str)
|
||||
str += csize;
|
||||
str += csize;
|
||||
|
||||
of_property_for_each_string(np, "compatible", p, compat) {
|
||||
csize = strlen(compat) + 1;
|
||||
tsize += csize;
|
||||
if (csize > len)
|
||||
if (csize >= len)
|
||||
continue;
|
||||
|
||||
csize = snprintf(str, len, "C%s", compat);
|
||||
|
|
|
|||
|
|
@ -123,6 +123,7 @@ extern void *__unflatten_device_tree(const void *blob,
|
|||
* own the devtree lock or work on detached trees only.
|
||||
*/
|
||||
struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags);
|
||||
void __of_prop_free(struct property *prop);
|
||||
struct device_node *__of_node_dup(const struct device_node *np,
|
||||
const char *full_name);
|
||||
|
||||
|
|
|
|||
|
|
@ -437,17 +437,10 @@ void __init fdt_init_reserved_mem(void)
|
|||
for (i = 0; i < reserved_mem_count; i++) {
|
||||
struct reserved_mem *rmem = &reserved_mem[i];
|
||||
unsigned long node = rmem->fdt_node;
|
||||
int len;
|
||||
const __be32 *prop;
|
||||
int err = 0;
|
||||
bool nomap;
|
||||
|
||||
nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
|
||||
prop = of_get_flat_dt_prop(node, "phandle", &len);
|
||||
if (!prop)
|
||||
prop = of_get_flat_dt_prop(node, "linux,phandle", &len);
|
||||
if (prop)
|
||||
rmem->phandle = of_read_number(prop, len/4);
|
||||
|
||||
if (rmem->size == 0)
|
||||
err = __reserved_mem_alloc_size(node, rmem->name,
|
||||
|
|
@ -477,19 +470,6 @@ void __init fdt_init_reserved_mem(void)
|
|||
}
|
||||
}
|
||||
|
||||
static inline struct reserved_mem *__find_rmem(struct device_node *node)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
if (!node->phandle)
|
||||
return NULL;
|
||||
|
||||
for (i = 0; i < reserved_mem_count; i++)
|
||||
if (reserved_mem[i].phandle == node->phandle)
|
||||
return &reserved_mem[i];
|
||||
return NULL;
|
||||
}
|
||||
|
||||
struct rmem_assigned_device {
|
||||
struct device *dev;
|
||||
struct reserved_mem *rmem;
|
||||
|
|
@ -534,7 +514,7 @@ int of_reserved_mem_device_init_by_idx(struct device *dev,
|
|||
return 0;
|
||||
}
|
||||
|
||||
rmem = __find_rmem(target);
|
||||
rmem = of_reserved_mem_lookup(target);
|
||||
of_node_put(target);
|
||||
|
||||
if (!rmem || !rmem->ops || !rmem->ops->device_init)
|
||||
|
|
|
|||
|
|
@ -262,9 +262,7 @@ static struct property *dup_and_fixup_symbol_prop(
|
|||
return new_prop;
|
||||
|
||||
err_free_new_prop:
|
||||
kfree(new_prop->name);
|
||||
kfree(new_prop->value);
|
||||
kfree(new_prop);
|
||||
__of_prop_free(new_prop);
|
||||
err_free_target_path:
|
||||
kfree(target_path);
|
||||
|
||||
|
|
@ -361,11 +359,8 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
|
|||
pr_err("WARNING: memory leak will occur if overlay removed, property: %pOF/%s\n",
|
||||
target->np, new_prop->name);
|
||||
|
||||
if (ret) {
|
||||
kfree(new_prop->name);
|
||||
kfree(new_prop->value);
|
||||
kfree(new_prop);
|
||||
}
|
||||
if (ret)
|
||||
__of_prop_free(new_prop);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -40,15 +40,12 @@
|
|||
*/
|
||||
bool of_graph_is_present(const struct device_node *node)
|
||||
{
|
||||
struct device_node *ports, *port;
|
||||
struct device_node *ports __free(device_node) = of_get_child_by_name(node, "ports");
|
||||
|
||||
ports = of_get_child_by_name(node, "ports");
|
||||
if (ports)
|
||||
node = ports;
|
||||
|
||||
port = of_get_child_by_name(node, "port");
|
||||
of_node_put(ports);
|
||||
of_node_put(port);
|
||||
struct device_node *port __free(device_node) = of_get_child_by_name(node, "port");
|
||||
|
||||
return !!port;
|
||||
}
|
||||
|
|
@ -579,7 +576,8 @@ EXPORT_SYMBOL_GPL(of_prop_next_string);
|
|||
int of_graph_parse_endpoint(const struct device_node *node,
|
||||
struct of_endpoint *endpoint)
|
||||
{
|
||||
struct device_node *port_node = of_get_parent(node);
|
||||
struct device_node *port_node __free(device_node) =
|
||||
of_get_parent(node);
|
||||
|
||||
WARN_ONCE(!port_node, "%s(): endpoint %pOF has no parent node\n",
|
||||
__func__, node);
|
||||
|
|
@ -594,8 +592,6 @@ int of_graph_parse_endpoint(const struct device_node *node,
|
|||
of_property_read_u32(port_node, "reg", &endpoint->port);
|
||||
of_property_read_u32(node, "reg", &endpoint->id);
|
||||
|
||||
of_node_put(port_node);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(of_graph_parse_endpoint);
|
||||
|
|
@ -610,25 +606,22 @@ EXPORT_SYMBOL(of_graph_parse_endpoint);
|
|||
*/
|
||||
struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id)
|
||||
{
|
||||
struct device_node *node, *port;
|
||||
struct device_node *node __free(device_node) = of_get_child_by_name(parent, "ports");
|
||||
|
||||
node = of_get_child_by_name(parent, "ports");
|
||||
if (node)
|
||||
parent = node;
|
||||
|
||||
for_each_child_of_node(parent, port) {
|
||||
for_each_child_of_node_scoped(parent, port) {
|
||||
u32 port_id = 0;
|
||||
|
||||
if (!of_node_name_eq(port, "port"))
|
||||
continue;
|
||||
of_property_read_u32(port, "reg", &port_id);
|
||||
if (id == port_id)
|
||||
break;
|
||||
return_ptr(port);
|
||||
}
|
||||
|
||||
of_node_put(node);
|
||||
|
||||
return port;
|
||||
return NULL;
|
||||
}
|
||||
EXPORT_SYMBOL(of_graph_get_port_by_id);
|
||||
|
||||
|
|
@ -655,15 +648,13 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
|
|||
* parent port node.
|
||||
*/
|
||||
if (!prev) {
|
||||
struct device_node *node;
|
||||
struct device_node *node __free(device_node) =
|
||||
of_get_child_by_name(parent, "ports");
|
||||
|
||||
node = of_get_child_by_name(parent, "ports");
|
||||
if (node)
|
||||
parent = node;
|
||||
|
||||
port = of_get_child_by_name(parent, "port");
|
||||
of_node_put(node);
|
||||
|
||||
if (!port) {
|
||||
pr_debug("graph: no port node found in %pOF\n", parent);
|
||||
return NULL;
|
||||
|
|
@ -1052,15 +1043,13 @@ static int of_fwnode_graph_parse_endpoint(const struct fwnode_handle *fwnode,
|
|||
struct fwnode_endpoint *endpoint)
|
||||
{
|
||||
const struct device_node *node = to_of_node(fwnode);
|
||||
struct device_node *port_node = of_get_parent(node);
|
||||
struct device_node *port_node __free(device_node) = of_get_parent(node);
|
||||
|
||||
endpoint->local_fwnode = fwnode;
|
||||
|
||||
of_property_read_u32(port_node, "reg", &endpoint->port);
|
||||
of_property_read_u32(node, "reg", &endpoint->id);
|
||||
|
||||
of_node_put(port_node);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -1254,6 +1243,7 @@ DEFINE_SIMPLE_PROP(msi_parent, "msi-parent", "#msi-cells")
|
|||
DEFINE_SIMPLE_PROP(post_init_providers, "post-init-providers", NULL)
|
||||
DEFINE_SIMPLE_PROP(access_controllers, "access-controllers", "#access-controller-cells")
|
||||
DEFINE_SIMPLE_PROP(pses, "pses", "#pse-cells")
|
||||
DEFINE_SIMPLE_PROP(power_supplies, "power-supplies", NULL)
|
||||
DEFINE_SUFFIX_PROP(regulators, "-supply", NULL)
|
||||
DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells")
|
||||
|
||||
|
|
@ -1313,6 +1303,57 @@ static struct device_node *parse_interrupts(struct device_node *np,
|
|||
return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
|
||||
}
|
||||
|
||||
static struct device_node *parse_interrupt_map(struct device_node *np,
|
||||
const char *prop_name, int index)
|
||||
{
|
||||
const __be32 *imap, *imap_end, *addr;
|
||||
struct of_phandle_args sup_args;
|
||||
u32 addrcells, intcells;
|
||||
int i, imaplen;
|
||||
|
||||
if (!IS_ENABLED(CONFIG_OF_IRQ))
|
||||
return NULL;
|
||||
|
||||
if (strcmp(prop_name, "interrupt-map"))
|
||||
return NULL;
|
||||
|
||||
if (of_property_read_u32(np, "#interrupt-cells", &intcells))
|
||||
return NULL;
|
||||
addrcells = of_bus_n_addr_cells(np);
|
||||
|
||||
imap = of_get_property(np, "interrupt-map", &imaplen);
|
||||
if (!imap || imaplen <= (addrcells + intcells))
|
||||
return NULL;
|
||||
imap_end = imap + imaplen;
|
||||
|
||||
while (imap < imap_end) {
|
||||
addr = imap;
|
||||
imap += addrcells;
|
||||
|
||||
sup_args.np = np;
|
||||
sup_args.args_count = intcells;
|
||||
for (i = 0; i < intcells; i++)
|
||||
sup_args.args[i] = be32_to_cpu(imap[i]);
|
||||
imap += intcells;
|
||||
|
||||
/*
|
||||
* Upon success, the function of_irq_parse_raw() returns
|
||||
* interrupt controller DT node pointer in sup_args.np.
|
||||
*/
|
||||
if (of_irq_parse_raw(addr, &sup_args))
|
||||
return NULL;
|
||||
|
||||
if (!index)
|
||||
return sup_args.np;
|
||||
|
||||
of_node_put(sup_args.np);
|
||||
imap += sup_args.args_count + 1;
|
||||
index--;
|
||||
}
|
||||
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static struct device_node *parse_remote_endpoint(struct device_node *np,
|
||||
const char *prop_name,
|
||||
int index)
|
||||
|
|
@ -1360,8 +1401,10 @@ static const struct supplier_bindings of_supplier_bindings[] = {
|
|||
{ .parse_prop = parse_panel, },
|
||||
{ .parse_prop = parse_msi_parent, },
|
||||
{ .parse_prop = parse_pses, },
|
||||
{ .parse_prop = parse_power_supplies, },
|
||||
{ .parse_prop = parse_gpio_compat, },
|
||||
{ .parse_prop = parse_interrupts, },
|
||||
{ .parse_prop = parse_interrupt_map, },
|
||||
{ .parse_prop = parse_access_controllers, },
|
||||
{ .parse_prop = parse_regulators, },
|
||||
{ .parse_prop = parse_gpio, },
|
||||
|
|
|
|||
|
|
@ -8,6 +8,7 @@
|
|||
|
||||
#define pr_fmt(fmt) "OF: resolver: " fmt
|
||||
|
||||
#include <linux/cleanup.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
|
|
@ -74,11 +75,11 @@ static int update_usages_of_a_phandle_reference(struct device_node *overlay,
|
|||
{
|
||||
struct device_node *refnode;
|
||||
struct property *prop;
|
||||
char *value, *cur, *end, *node_path, *prop_name, *s;
|
||||
char *value __free(kfree) = kmemdup(prop_fixup->value, prop_fixup->length, GFP_KERNEL);
|
||||
char *cur, *end, *node_path, *prop_name, *s;
|
||||
int offset, len;
|
||||
int err = 0;
|
||||
|
||||
value = kmemdup(prop_fixup->value, prop_fixup->length, GFP_KERNEL);
|
||||
if (!value)
|
||||
return -ENOMEM;
|
||||
|
||||
|
|
@ -89,23 +90,19 @@ static int update_usages_of_a_phandle_reference(struct device_node *overlay,
|
|||
|
||||
node_path = cur;
|
||||
s = strchr(cur, ':');
|
||||
if (!s) {
|
||||
err = -EINVAL;
|
||||
goto err_fail;
|
||||
}
|
||||
if (!s)
|
||||
return -EINVAL;
|
||||
*s++ = '\0';
|
||||
|
||||
prop_name = s;
|
||||
s = strchr(s, ':');
|
||||
if (!s) {
|
||||
err = -EINVAL;
|
||||
goto err_fail;
|
||||
}
|
||||
if (!s)
|
||||
return -EINVAL;
|
||||
*s++ = '\0';
|
||||
|
||||
err = kstrtoint(s, 10, &offset);
|
||||
if (err)
|
||||
goto err_fail;
|
||||
return err;
|
||||
|
||||
refnode = __of_find_node_by_full_path(of_node_get(overlay), node_path);
|
||||
if (!refnode)
|
||||
|
|
@ -117,22 +114,16 @@ static int update_usages_of_a_phandle_reference(struct device_node *overlay,
|
|||
}
|
||||
of_node_put(refnode);
|
||||
|
||||
if (!prop) {
|
||||
err = -ENOENT;
|
||||
goto err_fail;
|
||||
}
|
||||
if (!prop)
|
||||
return -ENOENT;
|
||||
|
||||
if (offset < 0 || offset + sizeof(__be32) > prop->length) {
|
||||
err = -EINVAL;
|
||||
goto err_fail;
|
||||
}
|
||||
if (offset < 0 || offset + sizeof(__be32) > prop->length)
|
||||
return -EINVAL;
|
||||
|
||||
*(__be32 *)(prop->value + offset) = cpu_to_be32(phandle);
|
||||
}
|
||||
|
||||
err_fail:
|
||||
kfree(value);
|
||||
return err;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* compare nodes taking into account that 'name' strips out the @ part */
|
||||
|
|
|
|||
|
|
@ -795,15 +795,11 @@ static void __init of_unittest_property_copy(void)
|
|||
|
||||
new = __of_prop_dup(&p1, GFP_KERNEL);
|
||||
unittest(new && propcmp(&p1, new), "empty property didn't copy correctly\n");
|
||||
kfree(new->value);
|
||||
kfree(new->name);
|
||||
kfree(new);
|
||||
__of_prop_free(new);
|
||||
|
||||
new = __of_prop_dup(&p2, GFP_KERNEL);
|
||||
unittest(new && propcmp(&p2, new), "non-empty property didn't copy correctly\n");
|
||||
kfree(new->value);
|
||||
kfree(new->name);
|
||||
kfree(new);
|
||||
__of_prop_free(new);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
|
@ -3718,9 +3714,7 @@ static __init void of_unittest_overlay_high_level(void)
|
|||
goto err_unlock;
|
||||
}
|
||||
if (__of_add_property(of_symbols, new_prop)) {
|
||||
kfree(new_prop->name);
|
||||
kfree(new_prop->value);
|
||||
kfree(new_prop);
|
||||
__of_prop_free(new_prop);
|
||||
/* "name" auto-generated by unflatten */
|
||||
if (!strcmp(prop->name, "name"))
|
||||
continue;
|
||||
|
|
|
|||
|
|
@ -11,7 +11,6 @@ struct reserved_mem_ops;
|
|||
struct reserved_mem {
|
||||
const char *name;
|
||||
unsigned long fdt_node;
|
||||
unsigned long phandle;
|
||||
const struct reserved_mem_ops *ops;
|
||||
phys_addr_t base;
|
||||
phys_addr_t size;
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user