tehuti: Use request_firmware()

Firmware blob is little endian.

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/tehuti.c

@@ -63,7 +63,6 @@
  */
 
 #include "tehuti.h"
-#include "tehuti_fw.h"
 
 static struct pci_device_id __devinitdata bdx_pci_tbl[] = {
 	{0x1FC9, 0x3009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -318,28 +317,41 @@ static int bdx_poll(struct napi_struct *napi, int budget)
 
 static int bdx_fw_load(struct bdx_priv *priv)
 {
+	const struct firmware *fw = NULL;
 	int master, i;
+	int rc;
 
 	ENTER;
 	master = READ_REG(priv, regINIT_SEMAPHORE);
 	if (!READ_REG(priv, regINIT_STATUS) && master) {
-		bdx_tx_push_desc_safe(priv, s_firmLoad, sizeof(s_firmLoad));
+		rc = request_firmware(&fw, "tehuti/firmware.bin", &priv->pdev->dev);
+		if (rc)
+			goto out;
+		bdx_tx_push_desc_safe(priv, (char *)fw->data, fw->size);
 		mdelay(100);
 	}
 	for (i = 0; i < 200; i++) {
-		if (READ_REG(priv, regINIT_STATUS))
-			break;
+		if (READ_REG(priv, regINIT_STATUS)) {
+			rc = 0;
+			goto out;
+		}
 		mdelay(2);
 	}
+	rc = -EIO;
+out:
 	if (master)
 		WRITE_REG(priv, regINIT_SEMAPHORE, 1);
+	if (fw)
+		release_firmware(fw);
 
-	if (i == 200) {
+	if (rc) {
 		ERR("%s: firmware loading failed\n", priv->ndev->name);
+		if (rc == -EIO)
 			DBG("VPC = 0x%x VIC = 0x%x INIT_STATUS = 0x%x i=%d\n",
 			    READ_REG(priv, regVPC),
-		    READ_REG(priv, regVIC), READ_REG(priv, regINIT_STATUS), i);
-		RET(-EIO);
+			    READ_REG(priv, regVIC),
+			    READ_REG(priv, regINIT_STATUS), i);
+		RET(rc);
 	} else {
 		DBG("%s: firmware loading success\n", priv->ndev->name);
 		RET(0);
@@ -617,13 +629,6 @@ err:
 	RET(rc);
 }
 
-static void __init bdx_firmware_endianess(void)
-{
-	int i;
-	for (i = 0; i < ARRAY_SIZE(s_firmLoad); i++)
-		s_firmLoad[i] = CPU_CHIP_SWAP32(s_firmLoad[i]);
-}
-
 static int bdx_range_check(struct bdx_priv *priv, u32 offset)
 {
 	return (offset > (u32) (BDX_REGS_SIZE / priv->nic->port_num)) ?
@@ -2501,7 +2506,6 @@ static void __init print_driver_id(void)
 static int __init bdx_module_init(void)
 {
 	ENTER;
-	bdx_firmware_endianess();
 	init_txd_sizes();
 	print_driver_id();
 	RET(pci_register_driver(&bdx_pci_driver));
@@ -2521,3 +2525,4 @@ module_exit(bdx_module_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(BDX_DRV_DESC);
+MODULE_FIRMWARE("tehuti/firmware.bin");

drivers/net/tehuti.h

@@ -29,6 +29,7 @@
 #include <linux/if_vlan.h>
 #include <linux/interrupt.h>
 #include <linux/vmalloc.h>
+#include <linux/firmware.h>
 #include <asm/byteorder.h>
 
 /* Compile Time Switches */

firmware/Makefile

@@ -49,6 +49,7 @@ fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
 				     sb16/ima_adpcm_capture.csp
 fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
 				   yamaha/ds1e_ctrl.fw
+fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
 fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
 			       tigon/tg3_tso5.bin
 fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin

firmware/WHENCE

@@ -435,3 +435,19 @@ Found in hex form in kernel source, with the following notice:
  ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM.
 
 --------------------------------------------------------------------------
+
+Driver: TEHUTI - Tehuti Networks 10G Ethernet
+
+File: tehuti/bdx.bin
+
+Licence:
+
+ Copyright (C) 2007 Tehuti Networks Ltd.
+
+ Permission is hereby granted for the distribution of this firmware data
+ in hexadecimal or equivalent format, provided this copyright notice is
+ accompanying it.
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------