pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banks

These were skipped in the original patches adding pinconf support for
the AST2600.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Cc: Johnny Huang <johnny_huang@aspeedtech.com>
Link: https://lore.kernel.org/r/20200910025631.2996342-4-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Andrew Jeffery 2020-09-10 12:26:31 +09:30 committed by Linus Walleij
parent 1d6db5ae6b
commit 05c0a8a9fe

View File

@ -19,6 +19,7 @@
#define SCU400 0x400 /* Multi-function Pin Control #1 */
#define SCU404 0x404 /* Multi-function Pin Control #2 */
#define SCU40C 0x40C /* Multi-function Pin Control #3 */
#define SCU410 0x410 /* Multi-function Pin Control #4 */
#define SCU414 0x414 /* Multi-function Pin Control #5 */
#define SCU418 0x418 /* Multi-function Pin Control #6 */
@ -2591,6 +2592,22 @@ static struct aspeed_pin_config aspeed_g6_configs[] = {
/* MAC4 */
{ PIN_CONFIG_POWER_SOURCE, { F24, B24 }, SCU458, BIT_MASK(5)},
{ PIN_CONFIG_DRIVE_STRENGTH, { F24, B24 }, SCU458, GENMASK(3, 2)},
/* GPIO18E */
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_PULL_DOWN, Y1, Y4, SCU40C, 4),
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_DISABLE, Y1, Y4, SCU40C, 4),
/* GPIO18D */
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_PULL_DOWN, AB4, AC5, SCU40C, 3),
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_DISABLE, AB4, AC5, SCU40C, 3),
/* GPIO18C */
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_PULL_DOWN, E4, E1, SCU40C, 2),
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_DISABLE, E4, E1, SCU40C, 2),
/* GPIO18B */
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_PULL_DOWN, B2, D3, SCU40C, 1),
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_DISABLE, B2, D3, SCU40C, 1),
/* GPIO18A */
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_PULL_DOWN, C6, A2, SCU40C, 0),
ASPEED_SB_PINCONF(PIN_CONFIG_BIAS_DISABLE, C6, A2, SCU40C, 0),
};
/**