From 057a4592e6dbad0e571628968f3e20a3706e4701 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 1 Apr 2016 17:44:37 +0200 Subject: [PATCH] mmc: sh_mobile_sdhi: Add UHS-I mode support Implement voltage switch, supporting modes up to SDR-50. Based on work by Shinobu Uehara, Rob Taylor, William Towle and Ian Molton. Signed-off-by: Ben Hutchings Signed-off-by: Wolfram Sang Signed-off-by: Ulf Hansson --- .../devicetree/bindings/mmc/tmio_mmc.txt | 3 ++ drivers/mmc/host/sh_mobile_sdhi.c | 52 +++++++++++++++++++ 2 files changed, 55 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 7fb746dd1a68..0f610d4b5b00 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -26,3 +26,6 @@ Required properties: Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin ctrl +- pinctrl-1: should contain uhs mode pin ctrl diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index 8fd1d6b29190..3c23027a2e99 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -32,6 +32,9 @@ #include #include #include +#include +#include +#include #include "tmio_mmc.h" @@ -97,6 +100,8 @@ struct sh_mobile_sdhi { struct clk *clk; struct tmio_mmc_data mmc_data; struct tmio_mmc_dma dma_priv; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default, *pins_uhs; }; static void sh_mobile_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width) @@ -205,6 +210,44 @@ static void sh_mobile_sdhi_clk_disable(struct tmio_mmc_host *host) clk_disable_unprepare(priv->clk); } +static int sh_mobile_sdhi_start_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct sh_mobile_sdhi *priv = host_to_priv(host); + struct pinctrl_state *pin_state; + int ret; + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + pin_state = priv->pins_default; + break; + case MMC_SIGNAL_VOLTAGE_180: + pin_state = priv->pins_uhs; + break; + default: + return -EINVAL; + } + + /* + * If anything is missing, assume signal voltage is fixed at + * 3.3V and succeed/fail accordingly. + */ + if (IS_ERR(priv->pinctrl) || IS_ERR(pin_state)) + return ios->signal_voltage == + MMC_SIGNAL_VOLTAGE_330 ? 0 : -EINVAL; + + ret = mmc_regulator_set_vqmmc(host->mmc, ios); + if (ret) + return ret; + + ret = pinctrl_select_state(priv->pinctrl, pin_state); + if (ret) + return ret; + + return 0; +} + static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host) { int timeout = 1000; @@ -296,6 +339,14 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev) goto eprobe; } + priv->pinctrl = devm_pinctrl_get(&pdev->dev); + if (!IS_ERR(priv->pinctrl)) { + priv->pins_default = pinctrl_lookup_state(priv->pinctrl, + PINCTRL_STATE_DEFAULT); + priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl, + "state_uhs"); + } + host = tmio_mmc_host_alloc(pdev); if (!host) { ret = -ENOMEM; @@ -319,6 +370,7 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev) host->clk_update = sh_mobile_sdhi_clk_update; host->clk_disable = sh_mobile_sdhi_clk_disable; host->multi_io_quirk = sh_mobile_sdhi_multi_io_quirk; + host->start_signal_voltage_switch = sh_mobile_sdhi_start_signal_voltage_switch; /* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */ if (!host->bus_shift && resource_size(res) > 0x100) /* old way to determine the shift */