Merge branch 'linus' into efi/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/dev-tools/kcov.rst

@@ -251,11 +251,11 @@ selectively from different subsystems.
 .. code-block:: c
 
     struct kcov_remote_arg {
-	unsigned	trace_mode;
+	__u32		trace_mode;
-	unsigned	area_size;
+	__u32		area_size;
-	unsigned	num_handles;
+	__u32		num_handles;
-	uint64_t	common_handle;
+	__aligned_u64	common_handle;
-	uint64_t	handles[0];
+	__aligned_u64	handles[0];
     };
 
     #define KCOV_INIT_TRACE			_IOR('c', 1, unsigned long)

Documentation/dev-tools/kunit/start.rst

@@ -24,19 +24,16 @@ The wrapper can be run with:
 For more information on this wrapper (also called kunit_tool) checkout the
 :doc:`kunit-tool` page.
 
-Creating a kunitconfig
+Creating a .kunitconfig
-======================
+=======================
 The Python script is a thin wrapper around Kbuild. As such, it needs to be
-configured with a ``kunitconfig`` file. This file essentially contains the
+configured with a ``.kunitconfig`` file. This file essentially contains the
 regular Kernel config, with the specific test targets as well.
 
 .. code-block:: bash
 
-	git clone -b master https://kunit.googlesource.com/kunitconfig $PATH_TO_KUNITCONFIG_REPO
 	cd $PATH_TO_LINUX_REPO
-	ln -s $PATH_TO_KUNIT_CONFIG_REPO/kunitconfig kunitconfig
+	cp arch/um/configs/kunit_defconfig .kunitconfig
-
-You may want to add kunitconfig to your local gitignore.
 
 Verifying KUnit Works
 ---------------------
@@ -151,7 +148,7 @@ and the following to ``drivers/misc/Makefile``:
 
 	obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o
 
-Now add it to your ``kunitconfig``:
+Now add it to your ``.kunitconfig``:
 
 .. code-block:: none
 

Documentation/devicetree/bindings/spi/spi-controller.yaml

@@ -111,7 +111,7 @@ patternProperties:
       spi-rx-bus-width:
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4 ]
+          - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
           Bus width to the SPI bus used for MISO.
@@ -123,7 +123,7 @@ patternProperties:
       spi-tx-bus-width:
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4 ]
+          - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
           Bus width to the SPI bus used for MOSI.

Documentation/features/debug/gcov-profile-all/arch-support.txt

@@ -23,7 +23,7 @@
     |    openrisc: | TODO |
     |      parisc: | TODO |
     |     powerpc: |  ok  |
-    |       riscv: | TODO |
+    |       riscv: |  ok  |
     |        s390: |  ok  |
     |          sh: |  ok  |
     |       sparc: | TODO |

Documentation/networking/dsa/sja1105.rst

@@ -230,12 +230,6 @@ simultaneously on two ports. The driver checks the consistency of the schedules
 against this restriction and errors out when appropriate. Schedule analysis is
 needed to avoid this, which is outside the scope of the document.
 
-At the moment, the time-aware scheduler can only be triggered based on a
-standalone clock and not based on PTP time. This means the base-time argument
-from tc-taprio is ignored and the schedule starts right away. It also means it
-is more difficult to phase-align the scheduler with the other devices in the
-network.
-
 Device Tree bindings and board design
 =====================================
 

Documentation/networking/ip-sysctl.txt

@@ -603,7 +603,7 @@ tcp_synack_retries - INTEGER
 	with the current initial RTO of 1second. With this the final timeout
 	for a passive TCP connection will happen after 63seconds.
 
-tcp_syncookies - BOOLEAN
+tcp_syncookies - INTEGER
 	Only valid when the kernel was compiled with CONFIG_SYN_COOKIES
 	Send out syncookies when the syn backlog queue of a socket
 	overflows. This is to prevent against the common 'SYN flood attack'

Documentation/networking/netdev-FAQ.rst

@@ -34,8 +34,8 @@ the names, the ``net`` tree is for fixes to existing code already in the
 mainline tree from Linus, and ``net-next`` is where the new code goes
 for the future release.  You can find the trees here:
 
-- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
-- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 
 Q: How often do changes from these trees make it to the mainline Linus tree?
 ----------------------------------------------------------------------------

Documentation/process/index.rst

@@ -60,6 +60,7 @@ lack of a better place.
    volatile-considered-harmful
    botching-up-ioctls
    clang-format
+   ../riscv/patch-acceptance
 
 .. only::  subproject and html
 

Documentation/riscv/index.rst

@@ -7,6 +7,7 @@ RISC-V architecture
 
     boot-image-header
     pmu
+    patch-acceptance
 
 .. only::  subproject and html
 

Documentation/riscv/patch-acceptance.rst

@@ -0,0 +1,35 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+arch/riscv maintenance guidelines for developers
+================================================
+
+Overview
+--------
+The RISC-V instruction set architecture is developed in the open:
+in-progress drafts are available for all to review and to experiment
+with implementations.  New module or extension drafts can change
+during the development process - sometimes in ways that are
+incompatible with previous drafts.  This flexibility can present a
+challenge for RISC-V Linux maintenance.  Linux maintainers disapprove
+of churn, and the Linux development process prefers well-reviewed and
+tested code over experimental code.  We wish to extend these same
+principles to the RISC-V-related code that will be accepted for
+inclusion in the kernel.
+
+Submit Checklist Addendum
+-------------------------
+We'll only accept patches for new modules or extensions if the
+specifications for those modules or extensions are listed as being
+"Frozen" or "Ratified" by the RISC-V Foundation.  (Developers may, of
+course, maintain their own Linux kernel trees that contain code for
+any draft extensions that they wish.)
+
+Additionally, the RISC-V specification allows implementors to create
+their own custom extensions.  These custom extensions aren't required
+to go through any review or ratification process by the RISC-V
+Foundation.  To avoid the maintenance complexity and potential
+performance impact of adding kernel code for implementor-specific
+RISC-V extensions, we'll only to accept patches for extensions that
+have been officially frozen or ratified by the RISC-V Foundation.
+(Implementors, may, of course, maintain their own Linux kernel trees
+containing code for any custom extensions that they wish.)

MAINTAINERS

@@ -771,6 +771,8 @@ F:	drivers/thermal/thermal_mmio.c
 
 AMAZON ETHERNET DRIVERS
 M:	Netanel Belgazal <netanel@amazon.com>
+M:	Arthur Kiyanovski <akiyano@amazon.com>
+R:	Guy Tzalik <gtzalik@amazon.com>
 R:	Saeed Bishara <saeedb@amazon.com>
 R:	Zorik Machulsky <zorik@amazon.com>
 L:	netdev@vger.kernel.org
@@ -7034,6 +7036,7 @@ L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware-guide/acpi/gpio-properties.rst
 F:	drivers/gpio/gpiolib-acpi.c
+F:	drivers/gpio/gpiolib-acpi.h
 
 GPIO IR Transmitter
 M:	Sean Young <sean@mess.org>
@@ -11457,8 +11460,8 @@ M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 S:	Odd Fixes
 F:	Documentation/devicetree/bindings/net/
 F:	drivers/net/
@@ -11499,8 +11502,8 @@ M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 B:	mailto:netdev@vger.kernel.org
 S:	Maintained
 F:	net/
@@ -11545,7 +11548,7 @@ M:	"David S. Miller" <davem@davemloft.net>
 M:	Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
 M:	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
 L:	netdev@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 S:	Maintained
 F:	net/ipv4/
 F:	net/ipv6/
@@ -13676,7 +13679,6 @@ F:	drivers/net/ethernet/qualcomm/emac/
 
 QUALCOMM ETHQOS ETHERNET DRIVER
 M:	Vinod Koul <vkoul@kernel.org>
-M:	Niklas Cassel <niklas.cassel@linaro.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -14118,6 +14120,7 @@ M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Albert Ou <aou@eecs.berkeley.edu>
 L:	linux-riscv@lists.infradead.org
+P:	Documentation/riscv/patch-acceptance.rst
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git
 S:	Supported
 F:	arch/riscv/
@@ -14545,8 +14548,6 @@ F:	include/linux/platform_data/spi-s3c64xx.h
 
 SAMSUNG SXGBE DRIVERS
 M:	Byungho An <bh74.an@samsung.com>
-M:	Girish K S <ks.giri@samsung.com>
-M:	Vipul Pandya <vipul.pandya@samsung.com>
 S:	Supported
 L:	netdev@vger.kernel.org
 F:	drivers/net/ethernet/samsung/sxgbe/

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*

arch/arc/include/asm/entry-arcv2.h

@@ -162,7 +162,7 @@
 #endif
 
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
-	ST2	r58, r59, PT_sp + 12
+	ST2	r58, r59, PT_r58
 #endif
 
 .endm
@@ -172,8 +172,8 @@
 
 	LD2	gp, fp, PT_r26		; gp (r26), fp (r27)
 
-	ld	r12, [sp, PT_sp + 4]
+	ld	r12, [sp, PT_r12]
-	ld	r30, [sp, PT_sp + 8]
+	ld	r30, [sp, PT_r30]
 
 	; Restore SP (into AUX_USER_SP) only if returning to U mode
 	;  - for K mode, it will be implicitly restored as stack is unwound
@@ -190,7 +190,7 @@
 #endif
 
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
-	LD2	r58, r59, PT_sp + 12
+	LD2	r58, r59, PT_r58
 #endif
 .endm
 

arch/arc/include/asm/hugepage.h

@@ -8,7 +8,6 @@
 #define _ASM_ARC_HUGEPAGE_H
 
 #include <linux/types.h>
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
 static inline pte_t pmd_pte(pmd_t pmd)

arch/arc/kernel/asm-offsets.c

@@ -66,7 +66,15 @@ int main(void)
 
 	DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
 	DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
-	DEFINE(PT_user_r25, offsetof(struct pt_regs, user_r25));
+
+#ifdef CONFIG_ISA_ARCV2
+	OFFSET(PT_r12, pt_regs, r12);
+	OFFSET(PT_r30, pt_regs, r30);
+#endif
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	OFFSET(PT_r58, pt_regs, r58);
+	OFFSET(PT_r59, pt_regs, r59);
+#endif
 
 	return 0;
 }

arch/arc/plat-eznps/Kconfig

@@ -7,7 +7,7 @@
 menuconfig ARC_PLAT_EZNPS
 	bool "\"EZchip\" ARC dev platform"
 	select CPU_BIG_ENDIAN
-	select CLKSRC_NPS
+	select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
 	select EZNPS_GIC
 	select EZCHIP_NPS_MANAGEMENT_ENET if ETHERNET
 	help

arch/arm64/include/asm/pgtable-prot.h

@@ -85,13 +85,12 @@
 #define PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_WRITE)
 #define PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN)
 #define PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN)
-#define PAGE_EXECONLY		__pgprot(_PAGE_DEFAULT | PTE_RDONLY | PTE_NG | PTE_PXN)
 
 #define __P000  PAGE_NONE
 #define __P001  PAGE_READONLY
 #define __P010  PAGE_READONLY
 #define __P011  PAGE_READONLY
-#define __P100  PAGE_EXECONLY
+#define __P100  PAGE_READONLY_EXEC
 #define __P101  PAGE_READONLY_EXEC
 #define __P110  PAGE_READONLY_EXEC
 #define __P111  PAGE_READONLY_EXEC
@@ -100,7 +99,7 @@
 #define __S001  PAGE_READONLY
 #define __S010  PAGE_SHARED
 #define __S011  PAGE_SHARED
-#define __S100  PAGE_EXECONLY
+#define __S100  PAGE_READONLY_EXEC
 #define __S101  PAGE_READONLY_EXEC
 #define __S110  PAGE_SHARED_EXEC
 #define __S111  PAGE_SHARED_EXEC

arch/arm64/include/asm/pgtable.h

@@ -96,12 +96,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #define pte_dirty(pte)		(pte_sw_dirty(pte) || pte_hw_dirty(pte))
 
 #define pte_valid(pte)		(!!(pte_val(pte) & PTE_VALID))
-/*
- * Execute-only user mappings do not have the PTE_USER bit set. All valid
- * kernel mappings have the PTE_UXN bit set.
- */
 #define pte_valid_not_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == (PTE_VALID | PTE_UXN))
+	((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID)
 #define pte_valid_young(pte) \
 	((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF))
 #define pte_valid_user(pte) \
@@ -117,8 +113,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 
 /*
  * p??_access_permitted() is true for valid user mappings (subject to the
- * write permission check) other than user execute-only which do not have the
+ * write permission check). PROT_NONE mappings do not have the PTE_VALID bit
- * PTE_USER bit set. PROT_NONE mappings do not have the PTE_VALID bit set.
+ * set.
  */
 #define pte_access_permitted(pte, write) \
 	(pte_valid_user(pte) && (!(write) || pte_write(pte)))

arch/arm64/mm/fault.c

@@ -445,7 +445,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 	const struct fault_info *inf;
 	struct mm_struct *mm = current->mm;
 	vm_fault_t fault, major = 0;
-	unsigned long vm_flags = VM_READ | VM_WRITE;
+	unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC;
 	unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	if (kprobe_page_fault(regs, esr))

arch/arm64/mm/mmu.c

@@ -1070,7 +1070,6 @@ void arch_remove_memory(int nid, u64 start, u64 size,
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
-	struct zone *zone;
 
 	/*
 	 * FIXME: Cleanup page tables (also in arch_add_memory() in case
@@ -1079,7 +1078,6 @@ void arch_remove_memory(int nid, u64 start, u64 size,
 	 * unplug. ARCH_ENABLE_MEMORY_HOTREMOVE must not be
 	 * unlocked yet.
 	 */
-	zone = page_zone(pfn_to_page(start_pfn));
+	__remove_pages(start_pfn, nr_pages, altmap);
-	__remove_pages(zone, start_pfn, nr_pages, altmap);
 }
 #endif

arch/hexagon/include/asm/atomic.h

@@ -91,7 +91,7 @@ static inline void atomic_##op(int i, atomic_t *v)			\
 		"1:	%0 = memw_locked(%1);\n"			\
 		"	%0 = "#op "(%0,%2);\n"				\
 		"	memw_locked(%1,P3)=%0;\n"			\
-		"	if !P3 jump 1b;\n"				\
+		"	if (!P3) jump 1b;\n"				\
 		: "=&r" (output)					\
 		: "r" (&v->counter), "r" (i)				\
 		: "memory", "p3"					\
@@ -107,7 +107,7 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 		"1:	%0 = memw_locked(%1);\n"			\
 		"	%0 = "#op "(%0,%2);\n"				\
 		"	memw_locked(%1,P3)=%0;\n"			\
-		"	if !P3 jump 1b;\n"				\
+		"	if (!P3) jump 1b;\n"				\
 		: "=&r" (output)					\
 		: "r" (&v->counter), "r" (i)				\
 		: "memory", "p3"					\
@@ -124,7 +124,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 		"1:	%0 = memw_locked(%2);\n"			\
 		"	%1 = "#op "(%0,%3);\n"				\
 		"	memw_locked(%2,P3)=%1;\n"			\
-		"	if !P3 jump 1b;\n"				\
+		"	if (!P3) jump 1b;\n"				\
 		: "=&r" (output), "=&r" (val)				\
 		: "r" (&v->counter), "r" (i)				\
 		: "memory", "p3"					\
@@ -173,7 +173,7 @@ static inline int atomic_fetch_add_unless(atomic_t *v, int a, int u)
 		"	}"
 		"	memw_locked(%2, p3) = %1;"
 		"	{"
-		"		if !p3 jump 1b;"
+		"		if (!p3) jump 1b;"
 		"	}"
 		"2:"
 		: "=&r" (__oldval), "=&r" (tmp)

arch/hexagon/include/asm/bitops.h

@@ -38,7 +38,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr)
 	"1:	R12 = memw_locked(R10);\n"
 	"	{ P0 = tstbit(R12,R11); R12 = clrbit(R12,R11); }\n"
 	"	memw_locked(R10,P1) = R12;\n"
-	"	{if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+	"	{if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
 	: "=&r" (oldval)
 	: "r" (addr), "r" (nr)
 	: "r10", "r11", "r12", "p0", "p1", "memory"
@@ -62,7 +62,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
 	"1:	R12 = memw_locked(R10);\n"
 	"	{ P0 = tstbit(R12,R11); R12 = setbit(R12,R11); }\n"
 	"	memw_locked(R10,P1) = R12;\n"
-	"	{if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+	"	{if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
 	: "=&r" (oldval)
 	: "r" (addr), "r" (nr)
 	: "r10", "r11", "r12", "p0", "p1", "memory"
@@ -88,7 +88,7 @@ static inline int test_and_change_bit(int nr, volatile void *addr)
 	"1:	R12 = memw_locked(R10);\n"
 	"	{ P0 = tstbit(R12,R11); R12 = togglebit(R12,R11); }\n"
 	"	memw_locked(R10,P1) = R12;\n"
-	"	{if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+	"	{if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
 	: "=&r" (oldval)
 	: "r" (addr), "r" (nr)
 	: "r10", "r11", "r12", "p0", "p1", "memory"
@@ -223,7 +223,7 @@ static inline int ffs(int x)
 	int r;
 
 	asm("{ P0 = cmp.eq(%1,#0); %0 = ct0(%1);}\n"
-		"{ if P0 %0 = #0; if !P0 %0 = add(%0,#1);}\n"
+		"{ if (P0) %0 = #0; if (!P0) %0 = add(%0,#1);}\n"
 		: "=&r" (r)
 		: "r" (x)
 		: "p0");

arch/hexagon/include/asm/cmpxchg.h

@@ -30,7 +30,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
 	__asm__ __volatile__ (
 	"1:	%0 = memw_locked(%1);\n"    /*  load into retval */
 	"	memw_locked(%1,P0) = %2;\n" /*  store into memory */
-	"	if !P0 jump 1b;\n"
+	"	if (!P0) jump 1b;\n"
 	: "=&r" (retval)
 	: "r" (ptr), "r" (x)
 	: "memory", "p0"

arch/hexagon/include/asm/futex.h

@@ -16,7 +16,7 @@
 	    /* For example: %1 = %4 */ \
 	    insn \
 	"2: memw_locked(%3,p2) = %1;\n" \
-	"   if !p2 jump 1b;\n" \
+	"   if (!p2) jump 1b;\n" \
 	"   %1 = #0;\n" \
 	"3:\n" \
 	".section .fixup,\"ax\"\n" \
@@ -84,10 +84,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
 	"1: %1 = memw_locked(%3)\n"
 	"   {\n"
 	"      p2 = cmp.eq(%1,%4)\n"
-	"      if !p2.new jump:NT 3f\n"
+	"      if (!p2.new) jump:NT 3f\n"
 	"   }\n"
 	"2: memw_locked(%3,p2) = %5\n"
-	"   if !p2 jump 1b\n"
+	"   if (!p2) jump 1b\n"
 	"3:\n"
 	".section .fixup,\"ax\"\n"
 	"4: %0 = #%6\n"

arch/hexagon/include/asm/io.h

@@ -173,6 +173,7 @@ static inline void writel(u32 data, volatile void __iomem *addr)
 
 void __iomem *ioremap(unsigned long phys_addr, unsigned long size);
 #define ioremap_nocache ioremap
+#define ioremap_uc(X, Y) ioremap((X), (Y))
 
 
 #define __raw_writel writel

arch/hexagon/include/asm/spinlock.h

@@ -30,9 +30,9 @@ static inline void arch_read_lock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"1:	R6 = memw_locked(%0);\n"
 		"	{ P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		"	memw_locked(%0,P3) = R6;\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -46,7 +46,7 @@ static inline void arch_read_unlock(arch_rwlock_t *lock)
 		"1:	R6 = memw_locked(%0);\n"
 		"	R6 = add(R6,#-1);\n"
 		"	memw_locked(%0,P3) = R6\n"
-		"	if !P3 jump 1b;\n"
+		"	if (!P3) jump 1b;\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -61,7 +61,7 @@ static inline int arch_read_trylock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"	R6 = memw_locked(%1);\n"
 		"	{ %0 = #0; P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
-		"	{ if !P3 jump 1f; }\n"
+		"	{ if (!P3) jump 1f; }\n"
 		"	memw_locked(%1,P3) = R6;\n"
 		"	{ %0 = P3 }\n"
 		"1:\n"
@@ -78,9 +78,9 @@ static inline void arch_write_lock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"1:	R6 = memw_locked(%0)\n"
 		"	{ P3 = cmp.eq(R6,#0);  R6 = #-1;}\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		"	memw_locked(%0,P3) = R6;\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -94,7 +94,7 @@ static inline int arch_write_trylock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"	R6 = memw_locked(%1)\n"
 		"	{ %0 = #0; P3 = cmp.eq(R6,#0);  R6 = #-1;}\n"
-		"	{ if !P3 jump 1f; }\n"
+		"	{ if (!P3) jump 1f; }\n"
 		"	memw_locked(%1,P3) = R6;\n"
 		"	%0 = P3;\n"
 		"1:\n"
@@ -117,9 +117,9 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	__asm__ __volatile__(
 		"1:	R6 = memw_locked(%0);\n"
 		"	P3 = cmp.eq(R6,#0);\n"
-		"	{ if !P3 jump 1b; R6 = #1; }\n"
+		"	{ if (!P3) jump 1b; R6 = #1; }\n"
 		"	memw_locked(%0,P3) = R6;\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -139,7 +139,7 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
 	__asm__ __volatile__(
 		"	R6 = memw_locked(%1);\n"
 		"	P3 = cmp.eq(R6,#0);\n"
-		"	{ if !P3 jump 1f; R6 = #1; %0 = #0; }\n"
+		"	{ if (!P3) jump 1f; R6 = #1; %0 = #0; }\n"
 		"	memw_locked(%1,P3) = R6;\n"
 		"	%0 = P3;\n"
 		"1:\n"

arch/hexagon/kernel/stacktrace.c

@@ -11,8 +11,6 @@
 #include <linux/thread_info.h>
 #include <linux/module.h>
 
-register unsigned long current_frame_pointer asm("r30");
-
 struct stackframe {
 	unsigned long fp;
 	unsigned long rets;
@@ -30,7 +28,7 @@ void save_stack_trace(struct stack_trace *trace)
 
 	low = (unsigned long)task_stack_page(current);
 	high = low + THREAD_SIZE;
-	fp = current_frame_pointer;
+	fp = (unsigned long)__builtin_frame_address(0);
 
 	while (fp >= low && fp <= (high - sizeof(*frame))) {
 		frame = (struct stackframe *)fp;

arch/hexagon/kernel/vm_entry.S

@@ -369,7 +369,7 @@ ret_from_fork:
 		R26.L = #LO(do_work_pending);
 		R0 = #VM_INT_DISABLE;
 	}
-	if P0 jump check_work_pending
+	if (P0) jump check_work_pending
 	{
 		R0 = R25;
 		callr R24

arch/ia64/mm/init.c

@@ -689,9 +689,7 @@ void arch_remove_memory(int nid, u64 start, u64 size,
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
-	struct zone *zone;
 
-	zone = page_zone(pfn_to_page(start_pfn));
+	__remove_pages(start_pfn, nr_pages, altmap);
-	__remove_pages(zone, start_pfn, nr_pages, altmap);
 }
 #endif

arch/mips/Kconfig

@@ -47,7 +47,7 @@ config MIPS
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES
 	select HAVE_ASM_MODVERSIONS
-	select HAVE_EBPF_JIT if (!CPU_MICROMIPS)
+	select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT

arch/mips/boot/compressed/Makefile

@@ -29,6 +29,9 @@ KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
 	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
 
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT		:= n
+
 # decompressor objects (linked with vmlinuz)
 vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o
 

arch/mips/include/asm/cpu-type.h

@@ -15,7 +15,8 @@
 static inline int __pure __get_cpu_type(const int cpu_type)
 {
 	switch (cpu_type) {
-#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2EF)
+#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \
+    defined(CONFIG_SYS_HAS_CPU_LOONGSON2F)
 	case CPU_LOONGSON2EF:
 #endif
 

arch/mips/include/asm/thread_info.h

@@ -49,8 +49,26 @@ struct thread_info {
 	.addr_limit	= KERNEL_DS,		\
 }
 
-/* How to get the thread information struct from C.  */
+/*
+ * A pointer to the struct thread_info for the currently executing thread is
+ * held in register $28/$gp.
+ *
+ * We declare __current_thread_info as a global register variable rather than a
+ * local register variable within current_thread_info() because clang doesn't
+ * support explicit local register variables.
+ *
+ * When building the VDSO we take care not to declare the global register
+ * variable because this causes GCC to not preserve the value of $28/$gp in
+ * functions that change its value (which is common in the PIC VDSO when
+ * accessing the GOT). Since the VDSO shouldn't be accessing
+ * __current_thread_info anyway we declare it extern in order to cause a link
+ * failure if it's referenced.
+ */
+#ifdef __VDSO__
+extern struct thread_info *__current_thread_info;
+#else
 register struct thread_info *__current_thread_info __asm__("$28");
+#endif
 
 static inline struct thread_info *current_thread_info(void)
 {

arch/mips/include/asm/vdso/gettimeofday.h

@@ -26,8 +26,6 @@
 
 #define __VDSO_USE_SYSCALL		ULLONG_MAX
 
-#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
-
 static __always_inline long gettimeofday_fallback(
 				struct __kernel_old_timeval *_tv,
 				struct timezone *_tz)
@@ -48,17 +46,6 @@ static __always_inline long gettimeofday_fallback(
 	return error ? -ret : ret;
 }
 
-#else
-
-static __always_inline long gettimeofday_fallback(
-				struct __kernel_old_timeval *_tv,
-				struct timezone *_tz)
-{
-	return -1;
-}
-
-#endif
-
 static __always_inline long clock_gettime_fallback(
 					clockid_t _clkid,
 					struct __kernel_timespec *_ts)

arch/mips/kernel/cacheinfo.c

@@ -50,6 +50,25 @@ static int __init_cache_level(unsigned int cpu)
 	return 0;
 }
 
+static void fill_cpumask_siblings(int cpu, cpumask_t *cpu_map)
+{
+	int cpu1;
+
+	for_each_possible_cpu(cpu1)
+		if (cpus_are_siblings(cpu, cpu1))
+			cpumask_set_cpu(cpu1, cpu_map);
+}
+
+static void fill_cpumask_cluster(int cpu, cpumask_t *cpu_map)
+{
+	int cpu1;
+	int cluster = cpu_cluster(&cpu_data[cpu]);
+
+	for_each_possible_cpu(cpu1)
+		if (cpu_cluster(&cpu_data[cpu1]) == cluster)
+			cpumask_set_cpu(cpu1, cpu_map);
+}
+
 static int __populate_cache_leaves(unsigned int cpu)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -57,14 +76,20 @@ static int __populate_cache_leaves(unsigned int cpu)
 	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
 
 	if (c->icache.waysize) {
+		/* L1 caches are per core */
+		fill_cpumask_siblings(cpu, &this_leaf->shared_cpu_map);
 		populate_cache(dcache, this_leaf, 1, CACHE_TYPE_DATA);
+		fill_cpumask_siblings(cpu, &this_leaf->shared_cpu_map);
 		populate_cache(icache, this_leaf, 1, CACHE_TYPE_INST);
 	} else {
 		populate_cache(dcache, this_leaf, 1, CACHE_TYPE_UNIFIED);
 	}
 
-	if (c->scache.waysize)
+	if (c->scache.waysize) {
+		/* L2 cache is per cluster */
+		fill_cpumask_cluster(cpu, &this_leaf->shared_cpu_map);
 		populate_cache(scache, this_leaf, 2, CACHE_TYPE_UNIFIED);
+	}
 
 	if (c->tcache.waysize)
 		populate_cache(tcache, this_leaf, 3, CACHE_TYPE_UNIFIED);

arch/mips/net/ebpf_jit.c

@@ -1804,7 +1804,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	unsigned int image_size;
 	u8 *image_ptr;
 
-	if (!prog->jit_requested || MIPS_ISA_REV < 2)
+	if (!prog->jit_requested)
 		return prog;
 
 	tmp = bpf_jit_blind_constants(prog);

arch/mips/vdso/vgettimeofday.c

@@ -17,12 +17,22 @@ int __vdso_clock_gettime(clockid_t clock,
 	return __cvdso_clock_gettime32(clock, ts);
 }
 
+#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
+
+/*
+ * This is behind the ifdef so that we don't provide the symbol when there's no
+ * possibility of there being a usable clocksource, because there's nothing we
+ * can do without it. When libc fails the symbol lookup it should fall back on
+ * the standard syscall path.
+ */
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
 			struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
+#endif /* CONFIG_MIPS_CLOCK_VSYSCALL */
+
 int __vdso_clock_getres(clockid_t clock_id,
 			struct old_timespec32 *res)
 {
@@ -43,12 +53,22 @@ int __vdso_clock_gettime(clockid_t clock,
 	return __cvdso_clock_gettime(clock, ts);
 }
 
+#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
+
+/*
+ * This is behind the ifdef so that we don't provide the symbol when there's no
+ * possibility of there being a usable clocksource, because there's nothing we
+ * can do without it. When libc fails the symbol lookup it should fall back on
+ * the standard syscall path.
+ */
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
 			struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
+#endif /* CONFIG_MIPS_CLOCK_VSYSCALL */
+
 int __vdso_clock_getres(clockid_t clock_id,
 			struct __kernel_timespec *res)
 {

arch/powerpc/include/asm/spinlock.h

@@ -15,6 +15,7 @@
  *
  * (the type definitions are in asm/spinlock_types.h)
  */
+#include <linux/jump_label.h>
 #include <linux/irqflags.h>
 #ifdef CONFIG_PPC64
 #include <asm/paca.h>

arch/powerpc/mm/mem.c

@@ -151,10 +151,9 @@ void __ref arch_remove_memory(int nid, u64 start, u64 size,
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
-	struct page *page = pfn_to_page(start_pfn) + vmem_altmap_offset(altmap);
 	int ret;
 
-	__remove_pages(page_zone(page), start_pfn, nr_pages, altmap);
+	__remove_pages(start_pfn, nr_pages, altmap);
 
 	/* Remove htab bolted mappings for this section of memory */
 	start = (unsigned long)__va(start);

arch/powerpc/mm/slice.c

@@ -50,7 +50,7 @@ static void slice_print_mask(const char *label, const struct slice_mask *mask) {
 
 #endif
 
-static inline bool slice_addr_is_low(unsigned long addr)
+static inline notrace bool slice_addr_is_low(unsigned long addr)
 {
 	u64 tmp = (u64)addr;
 
@@ -659,7 +659,7 @@ unsigned long arch_get_unmapped_area_topdown(struct file *filp,
 				       mm_ctx_user_psize(&current->mm->context), 1);
 }
 
-unsigned int get_slice_psize(struct mm_struct *mm, unsigned long addr)
+unsigned int notrace get_slice_psize(struct mm_struct *mm, unsigned long addr)
 {
 	unsigned char *psizes;
 	int index, mask_index;

arch/riscv/Kconfig

@@ -64,6 +64,7 @@ config RISCV
 	select SPARSEMEM_STATIC if 32BIT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
+	select ARCH_HAS_GCOV_PROFILE_ALL
 
 config ARCH_MMAP_RND_BITS_MIN
 	default 18 if 64BIT

arch/riscv/boot/dts/sifive/fu540-c000.dtsi

@@ -54,6 +54,7 @@
 			reg = <1>;
 			riscv,isa = "rv64imafdc";
 			tlb-split;
+			next-level-cache = <&l2cache>;
 			cpu1_intc: interrupt-controller {
 				#interrupt-cells = <1>;
 				compatible = "riscv,cpu-intc";
@@ -77,6 +78,7 @@
 			reg = <2>;
 			riscv,isa = "rv64imafdc";
 			tlb-split;
+			next-level-cache = <&l2cache>;
 			cpu2_intc: interrupt-controller {
 				#interrupt-cells = <1>;
 				compatible = "riscv,cpu-intc";
@@ -100,6 +102,7 @@
 			reg = <3>;
 			riscv,isa = "rv64imafdc";
 			tlb-split;
+			next-level-cache = <&l2cache>;
 			cpu3_intc: interrupt-controller {
 				#interrupt-cells = <1>;
 				compatible = "riscv,cpu-intc";
@@ -123,6 +126,7 @@
 			reg = <4>;
 			riscv,isa = "rv64imafdc";
 			tlb-split;
+			next-level-cache = <&l2cache>;
 			cpu4_intc: interrupt-controller {
 				#interrupt-cells = <1>;
 				compatible = "riscv,cpu-intc";
@@ -253,6 +257,17 @@
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
+		l2cache: cache-controller@2010000 {
+			compatible = "sifive,fu540-c000-ccache", "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <1024>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic0>;
+			interrupts = <1 2 3>;
+			reg = <0x0 0x2010000 0x0 0x1000>;
+		};
 
 	};
 };

arch/riscv/include/asm/csr.h

@@ -116,9 +116,9 @@
 # define SR_PIE		SR_MPIE
 # define SR_PP		SR_MPP
 
-# define IRQ_SOFT	IRQ_M_SOFT
+# define RV_IRQ_SOFT		IRQ_M_SOFT
-# define IRQ_TIMER	IRQ_M_TIMER
+# define RV_IRQ_TIMER	IRQ_M_TIMER
-# define IRQ_EXT	IRQ_M_EXT
+# define RV_IRQ_EXT		IRQ_M_EXT
 #else /* CONFIG_RISCV_M_MODE */
 # define CSR_STATUS	CSR_SSTATUS
 # define CSR_IE		CSR_SIE
@@ -133,15 +133,15 @@
 # define SR_PIE		SR_SPIE
 # define SR_PP		SR_SPP
 
-# define IRQ_SOFT	IRQ_S_SOFT
+# define RV_IRQ_SOFT		IRQ_S_SOFT
-# define IRQ_TIMER	IRQ_S_TIMER
+# define RV_IRQ_TIMER	IRQ_S_TIMER
-# define IRQ_EXT	IRQ_S_EXT
+# define RV_IRQ_EXT		IRQ_S_EXT
 #endif /* CONFIG_RISCV_M_MODE */
 
 /* IE/IP (Supervisor/Machine Interrupt Enable/Pending) flags */
-#define IE_SIE		(_AC(0x1, UL) << IRQ_SOFT)
+#define IE_SIE		(_AC(0x1, UL) << RV_IRQ_SOFT)
-#define IE_TIE		(_AC(0x1, UL) << IRQ_TIMER)
+#define IE_TIE		(_AC(0x1, UL) << RV_IRQ_TIMER)
-#define IE_EIE		(_AC(0x1, UL) << IRQ_EXT)
+#define IE_EIE		(_AC(0x1, UL) << RV_IRQ_EXT)
 
 #ifndef __ASSEMBLY__
 

arch/riscv/kernel/entry.S

@@ -246,6 +246,7 @@ check_syscall_nr:
 	 */
 	li t1, -1
 	beq a7, t1, ret_from_syscall_rejected
+	blt a7, t1, 1f
 	/* Call syscall */
 	la s0, sys_call_table
 	slli t0, a7, RISCV_LGPTR

arch/riscv/kernel/ftrace.c

@@ -142,7 +142,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	 */
 	old = *parent;
 
-	if (function_graph_enter(old, self_addr, frame_pointer, parent))
+	if (!function_graph_enter(old, self_addr, frame_pointer, parent))
 		*parent = return_hooker;
 }
 

arch/riscv/kernel/irq.c

@@ -23,11 +23,11 @@ asmlinkage __visible void __irq_entry do_IRQ(struct pt_regs *regs)
 
 	irq_enter();
 	switch (regs->cause & ~CAUSE_IRQ_FLAG) {
-	case IRQ_TIMER:
+	case RV_IRQ_TIMER:
 		riscv_timer_interrupt();
 		break;
 #ifdef CONFIG_SMP
-	case IRQ_SOFT:
+	case RV_IRQ_SOFT:
 		/*
 		 * We only use software interrupts to pass IPIs, so if a non-SMP
 		 * system gets one, then we don't know what to do.
@@ -35,7 +35,7 @@ asmlinkage __visible void __irq_entry do_IRQ(struct pt_regs *regs)
 		riscv_software_interrupt();
 		break;
 #endif
-	case IRQ_EXT:
+	case RV_IRQ_EXT:
 		handle_arch_irq(regs);
 		break;
 	default:

arch/riscv/kernel/riscv_ksyms.c

@@ -9,8 +9,5 @@
 /*
  * Assembly functions that may be used (directly or indirectly) by modules
  */
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(__asm_copy_to_user);
-EXPORT_SYMBOL(__asm_copy_from_user);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memcpy);

arch/riscv/lib/uaccess.S

@@ -1,4 +1,5 @@
 #include <linux/linkage.h>
+#include <asm-generic/export.h>
 #include <asm/asm.h>
 #include <asm/csr.h>
 
@@ -66,6 +67,8 @@ ENTRY(__asm_copy_from_user)
 	j 3b
 ENDPROC(__asm_copy_to_user)
 ENDPROC(__asm_copy_from_user)
+EXPORT_SYMBOL(__asm_copy_to_user)
+EXPORT_SYMBOL(__asm_copy_from_user)
 
 
 ENTRY(__clear_user)
@@ -108,6 +111,7 @@ ENTRY(__clear_user)
 	bltu a0, a3, 5b
 	j 3b
 ENDPROC(__clear_user)
+EXPORT_SYMBOL(__clear_user)
 
 	.section .fixup,"ax"
 	.balign 4

arch/riscv/mm/cacheflush.c

@@ -22,6 +22,7 @@ void flush_icache_all(void)
 	else
 		on_each_cpu(ipi_remote_fence_i, NULL, 1);
 }
+EXPORT_SYMBOL(flush_icache_all);
 
 /*
  * Performs an icache flush for the given MM context.  RISC-V has no direct

arch/riscv/mm/init.c

@@ -99,13 +99,13 @@ static void __init setup_initrd(void)
 		pr_info("initrd not found or empty");
 		goto disable;
 	}
-	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
+	if (__pa_symbol(initrd_end) > PFN_PHYS(max_low_pfn)) {
 		pr_err("initrd extends beyond end of memory");
 		goto disable;
 	}
 
 	size = initrd_end - initrd_start;
-	memblock_reserve(__pa(initrd_start), size);
+	memblock_reserve(__pa_symbol(initrd_start), size);
 	initrd_below_start_ok = 1;
 
 	pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
@@ -124,8 +124,8 @@ void __init setup_bootmem(void)
 {
 	struct memblock_region *reg;
 	phys_addr_t mem_size = 0;
-	phys_addr_t vmlinux_end = __pa(&_end);
+	phys_addr_t vmlinux_end = __pa_symbol(&_end);
-	phys_addr_t vmlinux_start = __pa(&_start);
+	phys_addr_t vmlinux_start = __pa_symbol(&_start);
 
 	/* Find the memory region containing the kernel */
 	for_each_memblock(memory, reg) {
@@ -445,7 +445,7 @@ static void __init setup_vm_final(void)
 
 	/* Setup swapper PGD for fixmap */
 	create_pgd_mapping(swapper_pg_dir, FIXADDR_START,
-			   __pa(fixmap_pgd_next),
+			   __pa_symbol(fixmap_pgd_next),
 			   PGDIR_SIZE, PAGE_TABLE);
 
 	/* Map all memory banks */
@@ -474,7 +474,7 @@ static void __init setup_vm_final(void)
 	clear_fixmap(FIX_PMD);
 
 	/* Move to swapper page table */
-	csr_write(CSR_SATP, PFN_DOWN(__pa(swapper_pg_dir)) | SATP_MODE);
+	csr_write(CSR_SATP, PFN_DOWN(__pa_symbol(swapper_pg_dir)) | SATP_MODE);
 	local_flush_tlb_all();
 }
 #else

arch/s390/mm/init.c

@@ -292,10 +292,8 @@ void arch_remove_memory(int nid, u64 start, u64 size,
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
-	struct zone *zone;
 
-	zone = page_zone(pfn_to_page(start_pfn));
+	__remove_pages(start_pfn, nr_pages, altmap);
-	__remove_pages(zone, start_pfn, nr_pages, altmap);
 	vmem_remove_mapping(start, size);
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */

arch/sh/mm/init.c

@@ -434,9 +434,7 @@ void arch_remove_memory(int nid, u64 start, u64 size,
 {
 	unsigned long start_pfn = PFN_DOWN(start);
 	unsigned long nr_pages = size >> PAGE_SHIFT;
-	struct zone *zone;
 
-	zone = page_zone(pfn_to_page(start_pfn));
+	__remove_pages(start_pfn, nr_pages, altmap);
-	__remove_pages(zone, start_pfn, nr_pages, altmap);
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */

arch/x86/mm/init_32.c

@@ -865,10 +865,8 @@ void arch_remove_memory(int nid, u64 start, u64 size,
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
-	struct zone *zone;
 
-	zone = page_zone(pfn_to_page(start_pfn));
+	__remove_pages(start_pfn, nr_pages, altmap);
-	__remove_pages(zone, start_pfn, nr_pages, altmap);
 }
 #endif
 

arch/x86/mm/init_64.c

@@ -1212,10 +1212,8 @@ void __ref arch_remove_memory(int nid, u64 start, u64 size,
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
-	struct page *page = pfn_to_page(start_pfn) + vmem_altmap_offset(altmap);
-	struct zone *zone = page_zone(page);
 
-	__remove_pages(zone, start_pfn, nr_pages, altmap);
+	__remove_pages(start_pfn, nr_pages, altmap);
 	kernel_physical_mapping_remove(start, start + size);
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */

block/bio.c

@@ -538,6 +538,45 @@ void zero_fill_bio_iter(struct bio *bio, struct bvec_iter start)
 }
 EXPORT_SYMBOL(zero_fill_bio_iter);
 
+void bio_truncate(struct bio *bio, unsigned new_size)
+{
+	struct bio_vec bv;
+	struct bvec_iter iter;
+	unsigned int done = 0;
+	bool truncated = false;
+
+	if (new_size >= bio->bi_iter.bi_size)
+		return;
+
+	if (bio_data_dir(bio) != READ)
+		goto exit;
+
+	bio_for_each_segment(bv, bio, iter) {
+		if (done + bv.bv_len > new_size) {
+			unsigned offset;
+
+			if (!truncated)
+				offset = new_size - done;
+			else
+				offset = 0;
+			zero_user(bv.bv_page, offset, bv.bv_len - offset);
+			truncated = true;
+		}
+		done += bv.bv_len;
+	}
+
+ exit:
+	/*
+	 * Don't touch bvec table here and make it really immutable, since
+	 * fs bio user has to retrieve all pages via bio_for_each_segment_all
+	 * in its .end_bio() callback.
+	 *
+	 * It is enough to truncate bio by updating .bi_size since we can make
+	 * correct bvec with the updated .bi_size for drivers.
+	 */
+	bio->bi_iter.bi_size = new_size;
+}
+
 /**
  * bio_put - release a reference to a bio
  * @bio:   bio to release reference to

block/blk-merge.c

@@ -157,16 +157,14 @@ static inline unsigned get_max_io_size(struct request_queue *q,
 	return sectors & (lbs - 1);
 }
 
-static unsigned get_max_segment_size(const struct request_queue *q,
+static inline unsigned get_max_segment_size(const struct request_queue *q,
-				     unsigned offset)
+					    struct page *start_page,
+					    unsigned long offset)
 {
 	unsigned long mask = queue_segment_boundary(q);
 
-	/* default segment boundary mask means no boundary limit */
+	offset = mask & (page_to_phys(start_page) + offset);
-	if (mask == BLK_SEG_BOUNDARY_MASK)
+	return min_t(unsigned long, mask - offset + 1,
-		return queue_max_segment_size(q);
-
-	return min_t(unsigned long, mask - (mask & offset) + 1,
 		     queue_max_segment_size(q));
 }
 
@@ -201,7 +199,8 @@ static bool bvec_split_segs(const struct request_queue *q,
 	unsigned seg_size = 0;
 
 	while (len && *nsegs < max_segs) {
-		seg_size = get_max_segment_size(q, bv->bv_offset + total_len);
+		seg_size = get_max_segment_size(q, bv->bv_page,
+						bv->bv_offset + total_len);
 		seg_size = min(seg_size, len);
 
 		(*nsegs)++;
@@ -419,7 +418,8 @@ static unsigned blk_bvec_map_sg(struct request_queue *q,
 
 	while (nbytes > 0) {
 		unsigned offset = bvec->bv_offset + total;
-		unsigned len = min(get_max_segment_size(q, offset), nbytes);
+		unsigned len = min(get_max_segment_size(q, bvec->bv_page,
+					offset), nbytes);
 		struct page *page = bvec->bv_page;
 
 		/*

block/compat_ioctl.c

@@ -6,6 +6,7 @@
 #include <linux/compat.h>
 #include <linux/elevator.h>
 #include <linux/hdreg.h>
+#include <linux/pr.h>
 #include <linux/slab.h>
 #include <linux/syscalls.h>
 #include <linux/types.h>
@@ -354,6 +355,13 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 	 * but we call blkdev_ioctl, which gets the lock for us
 	 */
 	case BLKRRPART:
+	case BLKREPORTZONE:
+	case BLKRESETZONE:
+	case BLKOPENZONE:
+	case BLKCLOSEZONE:
+	case BLKFINISHZONE:
+	case BLKGETZONESZ:
+	case BLKGETNRZONES:
 		return blkdev_ioctl(bdev, mode, cmd,
 				(unsigned long)compat_ptr(arg));
 	case BLKBSZSET_32:
@@ -401,6 +409,14 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 	case BLKTRACETEARDOWN: /* compatible */
 		ret = blk_trace_ioctl(bdev, cmd, compat_ptr(arg));
 		return ret;
+	case IOC_PR_REGISTER:
+	case IOC_PR_RESERVE:
+	case IOC_PR_RELEASE:
+	case IOC_PR_PREEMPT:
+	case IOC_PR_PREEMPT_ABORT:
+	case IOC_PR_CLEAR:
+		return blkdev_ioctl(bdev, mode, cmd,
+				(unsigned long)compat_ptr(arg));
 	default:
 		if (disk->fops->compat_ioctl)
 			ret = disk->fops->compat_ioctl(bdev, mode, cmd, arg);

drivers/ata/ahci_brcm.c

@@ -76,8 +76,7 @@ enum brcm_ahci_version {
 };
 
 enum brcm_ahci_quirks {
-	BRCM_AHCI_QUIRK_NO_NCQ		= BIT(0),
+	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(0),
-	BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE	= BIT(1),
 };
 
 struct brcm_ahci_priv {
@@ -213,19 +212,12 @@ static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
 			brcm_sata_phy_disable(priv, i);
 }
 
-static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
+static u32 brcm_ahci_get_portmask(struct ahci_host_priv *hpriv,
 				  struct brcm_ahci_priv *priv)
 {
-	void __iomem *ahci;
-	struct resource *res;
 	u32 impl;
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
+	impl = readl(hpriv->mmio + HOST_PORTS_IMPL);
-	ahci = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(ahci))
-		return 0;
-
-	impl = readl(ahci + HOST_PORTS_IMPL);
 
 	if (fls(impl) > SATA_TOP_MAX_PHYS)
 		dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
@@ -233,9 +225,6 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
 	else if (!impl)
 		dev_info(priv->dev, "no ports found\n");
 
-	devm_iounmap(&pdev->dev, ahci);
-	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
-
 	return impl;
 }
 
@@ -285,6 +274,13 @@ static unsigned int brcm_ahci_read_id(struct ata_device *dev,
 	/* Perform the SATA PHY reset sequence */
 	brcm_sata_phy_disable(priv, ap->port_no);
 
+	/* Reset the SATA clock */
+	ahci_platform_disable_clks(hpriv);
+	msleep(10);
+
+	ahci_platform_enable_clks(hpriv);
+	msleep(10);
+
 	/* Bring the PHY back on */
 	brcm_sata_phy_enable(priv, ap->port_no);
 
@@ -347,11 +343,10 @@ static int brcm_ahci_suspend(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
-	int ret;
 
-	ret = ahci_platform_suspend(dev);
 	brcm_sata_phys_disable(priv);
-	return ret;
+
+	return ahci_platform_suspend(dev);
 }
 
 static int brcm_ahci_resume(struct device *dev)
@@ -359,11 +354,44 @@ static int brcm_ahci_resume(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
+	int ret;
+
+	/* Make sure clocks are turned on before re-configuration */
+	ret = ahci_platform_enable_clks(hpriv);
+	if (ret)
+		return ret;
 
 	brcm_sata_init(priv);
 	brcm_sata_phys_enable(priv);
 	brcm_sata_alpm_init(hpriv);
-	return ahci_platform_resume(dev);
+
+	/* Since we had to enable clocks earlier on, we cannot use
+	 * ahci_platform_resume() as-is since a second call to
+	 * ahci_platform_enable_resources() would bump up the resources
+	 * (regulators, clocks, PHYs) count artificially so we copy the part
+	 * after ahci_platform_enable_resources().
+	 */
+	ret = ahci_platform_enable_phys(hpriv);
+	if (ret)
+		goto out_disable_phys;
+
+	ret = ahci_platform_resume_host(dev);
+	if (ret)
+		goto out_disable_platform_phys;
+
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+out_disable_platform_phys:
+	ahci_platform_disable_phys(hpriv);
+out_disable_phys:
+	brcm_sata_phys_disable(priv);
+	ahci_platform_disable_clks(hpriv);
+	return ret;
 }
 #endif
 
@@ -410,44 +438,71 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (!IS_ERR_OR_NULL(priv->rcdev))
 		reset_control_deassert(priv->rcdev);
 
-	if ((priv->version == BRCM_SATA_BCM7425) ||
+	hpriv = ahci_platform_get_resources(pdev, 0);
-		(priv->version == BRCM_SATA_NSP)) {
+	if (IS_ERR(hpriv)) {
-		priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
+		ret = PTR_ERR(hpriv);
-		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+		goto out_reset;
 	}
 
+	hpriv->plat_data = priv;
+	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP | AHCI_HFLAG_NO_WRITE_TO_RO;
+
+	switch (priv->version) {
+	case BRCM_SATA_BCM7425:
+		hpriv->flags |= AHCI_HFLAG_DELAY_ENGINE;
+		/* fall through */
+	case BRCM_SATA_NSP:
+		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
+		priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+		break;
+	default:
+		break;
+	}
+
+	ret = ahci_platform_enable_clks(hpriv);
+	if (ret)
+		goto out_reset;
+
+	/* Must be first so as to configure endianness including that
+	 * of the standard AHCI register space.
+	 */
 	brcm_sata_init(priv);
 
-	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
+	/* Initializes priv->port_mask which is used below */
-	if (!priv->port_mask)
+	priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
-		return -ENODEV;
+	if (!priv->port_mask) {
+		ret = -ENODEV;
+		goto out_disable_clks;
+	}
 
+	/* Must be done before ahci_platform_enable_phys() */
 	brcm_sata_phys_enable(priv);
 
-	hpriv = ahci_platform_get_resources(pdev, 0);
-	if (IS_ERR(hpriv))
-		return PTR_ERR(hpriv);
-	hpriv->plat_data = priv;
-	hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
-
 	brcm_sata_alpm_init(hpriv);
 
-	ret = ahci_platform_enable_resources(hpriv);
+	ret = ahci_platform_enable_phys(hpriv);
 	if (ret)
-		return ret;
+		goto out_disable_phys;
-
-	if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
-		hpriv->flags |= AHCI_HFLAG_NO_NCQ;
-	hpriv->flags |= AHCI_HFLAG_NO_WRITE_TO_RO;
 
 	ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
 				      &ahci_platform_sht);
 	if (ret)
-		return ret;
+		goto out_disable_platform_phys;
 
 	dev_info(dev, "Broadcom AHCI SATA3 registered\n");
 
 	return 0;
+
+out_disable_platform_phys:
+	ahci_platform_disable_phys(hpriv);
+out_disable_phys:
+	brcm_sata_phys_disable(priv);
+out_disable_clks:
+	ahci_platform_disable_clks(hpriv);
+out_reset:
+	if (!IS_ERR_OR_NULL(priv->rcdev))
+		reset_control_assert(priv->rcdev);
+	return ret;
 }
 
 static int brcm_ahci_remove(struct platform_device *pdev)
@@ -457,12 +512,12 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 	struct brcm_ahci_priv *priv = hpriv->plat_data;
 	int ret;
 
+	brcm_sata_phys_disable(priv);
+
 	ret = ata_platform_remove_one(pdev);
 	if (ret)
 		return ret;
 
-	brcm_sata_phys_disable(priv);
-
 	return 0;
 }
 

drivers/ata/libahci_platform.c

@@ -43,7 +43,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_ops);
  * RETURNS:
  * 0 on success otherwise a negative error code
  */
-static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
+int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
 {
 	int rc, i;
 
@@ -74,6 +74,7 @@ disable_phys:
 	}
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ahci_platform_enable_phys);
 
 /**
  * ahci_platform_disable_phys - Disable PHYs
@@ -81,7 +82,7 @@ disable_phys:
  *
  * This function disables all PHYs found in hpriv->phys.
  */
-static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
+void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
 {
 	int i;
 
@@ -90,6 +91,7 @@ static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
 		phy_exit(hpriv->phys[i]);
 	}
 }
+EXPORT_SYMBOL_GPL(ahci_platform_disable_phys);
 
 /**
  * ahci_platform_enable_clks - Enable platform clocks

drivers/ata/libata-core.c

@@ -5328,6 +5328,30 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 	}
 }
 
+/**
+ *	ata_qc_get_active - get bitmask of active qcs
+ *	@ap: port in question
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	Bitmask of active qcs
+ */
+u64 ata_qc_get_active(struct ata_port *ap)
+{
+	u64 qc_active = ap->qc_active;
+
+	/* ATA_TAG_INTERNAL is sent to hw as tag 0 */
+	if (qc_active & (1ULL << ATA_TAG_INTERNAL)) {
+		qc_active |= (1 << 0);
+		qc_active &= ~(1ULL << ATA_TAG_INTERNAL);
+	}
+
+	return qc_active;
+}
+EXPORT_SYMBOL_GPL(ata_qc_get_active);
+
 /**
  *	ata_qc_complete_multiple - Complete multiple qcs successfully
  *	@ap: port in question

drivers/ata/sata_fsl.c

@@ -1280,7 +1280,7 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 				     i, ioread32(hcr_base + CC),
 				     ioread32(hcr_base + CA));
 		}
-		ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
+		ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask);
 		return;
 
 	} else if ((ap->qc_active & (1ULL << ATA_TAG_INTERNAL))) {

drivers/ata/sata_mv.c

@@ -2829,7 +2829,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp
 	}
 
 	if (work_done) {
-		ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
+		ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask);
 
 		/* Update the software queue position index in hardware */
 		writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |

drivers/ata/sata_nv.c

@@ -984,7 +984,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
 					check_commands = 0;
 				check_commands &= ~(1 << pos);
 			}
-			ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
+			ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask);
 		}
 	}
 

drivers/atm/eni.c

@@ -374,7 +374,7 @@ static int do_rx_dma(struct atm_vcc *vcc,struct sk_buff *skb,
 		here = (eni_vcc->descr+skip) & (eni_vcc->words-1);
 		dma[j++] = (here << MID_DMA_COUNT_SHIFT) | (vcc->vci
 		    << MID_DMA_VCI_SHIFT) | MID_DT_JK;
-		j++;
+		dma[j++] = 0;
 	}
 	here = (eni_vcc->descr+size+skip) & (eni_vcc->words-1);
 	if (!eff) size += skip;
@@ -447,7 +447,7 @@ static int do_rx_dma(struct atm_vcc *vcc,struct sk_buff *skb,
 	if (size != eff) {
 		dma[j++] = (here << MID_DMA_COUNT_SHIFT) |
 		    (vcc->vci << MID_DMA_VCI_SHIFT) | MID_DT_JK;
-		j++;
+		dma[j++] = 0;
 	}
 	if (!j || j > 2*RX_DMA_BUF) {
 		printk(KERN_CRIT DEV_LABEL "!j or j too big!!!\n");

drivers/block/null_blk_zoned.c

@@ -186,7 +186,10 @@ static blk_status_t null_zone_mgmt(struct nullb_cmd *cmd, enum req_opf op,
 		if (zone->cond == BLK_ZONE_COND_FULL)
 			return BLK_STS_IOERR;
 
-		zone->cond = BLK_ZONE_COND_CLOSED;
+		if (zone->wp == zone->start)
+			zone->cond = BLK_ZONE_COND_EMPTY;
+		else
+			zone->cond = BLK_ZONE_COND_CLOSED;
 		break;
 	case REQ_OP_ZONE_FINISH:
 		if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)

drivers/block/pktcdvd.c

@@ -2707,7 +2707,7 @@ static const struct block_device_operations pktcdvd_ops = {
 	.release =		pkt_close,
 	.ioctl =		pkt_ioctl,
 #ifdef CONFIG_COMPAT
-	.ioctl =		pkt_compat_ioctl,
+	.compat_ioctl =		pkt_compat_ioctl,
 #endif
 	.check_events =		pkt_check_events,
 };

drivers/char/agp/isoch.c

@@ -84,7 +84,6 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 	unsigned int cdev = 0;
 	u32 mnistat, tnistat, tstatus, mcmd;
 	u16 tnicmd, mnicmd;
-	u8 mcapndx;
 	u32 tot_bw = 0, tot_n = 0, tot_rq = 0, y_max, rq_isoch, rq_async;
 	u32 step, rem, rem_isoch, rem_async;
 	int ret = 0;
@@ -138,8 +137,6 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 		cur = list_entry(pos, struct agp_3_5_dev, list);
 		dev = cur->dev;
 
-		mcapndx = cur->capndx;
-
 		pci_read_config_dword(dev, cur->capndx+AGPNISTAT, &mnistat);
 
 		master[cdev].maxbw = (mnistat >> 16) & 0xff;
@@ -251,8 +248,6 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 		cur = master[cdev].dev;
 		dev = cur->dev;
 
-		mcapndx = cur->capndx;
-
 		master[cdev].rq += (cdev == ndevs - 1)
 		              ? (rem_async + rem_isoch) : step;
 
@@ -319,7 +314,7 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 {
 	struct pci_dev *td = bridge->dev, *dev = NULL;
 	u8 mcapndx;
-	u32 isoch, arqsz;
+	u32 isoch;
 	u32 tstatus, mstatus, ncapid;
 	u32 mmajor;
 	u16 mpstat;
@@ -334,8 +329,6 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 	if (isoch == 0)	/* isoch xfers not available, bail out. */
 		return -ENODEV;
 
-	arqsz     = (tstatus >> 13) & 0x7;
-
 	/*
 	 * Allocate a head for our AGP 3.5 device list
 	 * (multiple AGP v3 devices are allowed behind a single bridge).

drivers/char/tpm/tpm-dev-common.c

@@ -130,7 +130,7 @@ ssize_t tpm_common_read(struct file *file, char __user *buf,
 		priv->response_read = true;
 
 		ret_size = min_t(ssize_t, size, priv->response_length);
-		if (!ret_size) {
+		if (ret_size <= 0) {
 			priv->response_length = 0;
 			goto out;
 		}

drivers/char/tpm/tpm-dev.h

@@ -14,7 +14,7 @@ struct file_priv {
 	struct work_struct timeout_work;
 	struct work_struct async_work;
 	wait_queue_head_t async_wait;
-	size_t response_length;
+	ssize_t response_length;
 	bool response_read;
 	bool command_enqueued;
 

drivers/char/tpm/tpm_tis_core.c

@@ -978,13 +978,13 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 
 	if (wait_startup(chip, 0) != 0) {
 		rc = -ENODEV;
-		goto err_start;
+		goto out_err;
 	}
 
 	/* Take control of the TPM's interrupt hardware and shut it off */
 	rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
 	if (rc < 0)
-		goto err_start;
+		goto out_err;
 
 	intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
 		   TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
@@ -993,21 +993,21 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 
 	rc = tpm_chip_start(chip);
 	if (rc)
-		goto err_start;
+		goto out_err;
-
 	rc = tpm2_probe(chip);
+	tpm_chip_stop(chip);
 	if (rc)
-		goto err_probe;
+		goto out_err;
 
 	rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
 	if (rc < 0)
-		goto err_probe;
+		goto out_err;
 
 	priv->manufacturer_id = vendor;
 
 	rc = tpm_tis_read8(priv, TPM_RID(0), &rid);
 	if (rc < 0)
-		goto err_probe;
+		goto out_err;
 
 	dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
 		 (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
@@ -1016,13 +1016,13 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	probe = probe_itpm(chip);
 	if (probe < 0) {
 		rc = -ENODEV;
-		goto err_probe;
+		goto out_err;
 	}
 
 	/* Figure out the capabilities */
 	rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
 	if (rc < 0)
-		goto err_probe;
+		goto out_err;
 
 	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
 		intfcaps);
@@ -1056,10 +1056,9 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 		if (tpm_get_timeouts(chip)) {
 			dev_err(dev, "Could not get TPM timeouts and durations\n");
 			rc = -ENODEV;
-			goto err_probe;
+			goto out_err;
 		}
 
-		chip->flags |= TPM_CHIP_FLAG_IRQ;
 		if (irq) {
 			tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
 						 irq);
@@ -1071,18 +1070,15 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 		}
 	}
 
-	tpm_chip_stop(chip);
-
 	rc = tpm_chip_register(chip);
 	if (rc)
-		goto err_start;
+		goto out_err;
+
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
 
 	return 0;
-
+out_err:
-err_probe:
-	tpm_chip_stop(chip);
-
-err_start:
 	if ((chip->ops != NULL) && (chip->ops->clk_enable != NULL))
 		chip->ops->clk_enable(chip, false);
 

drivers/clocksource/timer-riscv.c

@@ -56,7 +56,7 @@ static unsigned long long riscv_clocksource_rdtime(struct clocksource *cs)
 	return get_cycles64();
 }
 
-static u64 riscv_sched_clock(void)
+static u64 notrace riscv_sched_clock(void)
 {
 	return get_cycles64();
 }

drivers/devfreq/Kconfig

@@ -83,7 +83,6 @@ config ARM_EXYNOS_BUS_DEVFREQ
 	select DEVFREQ_GOV_PASSIVE
 	select DEVFREQ_EVENT_EXYNOS_PPMU
 	select PM_DEVFREQ_EVENT
-	select PM_OPP
 	help
 	  This adds the common DEVFREQ driver for Exynos Memory bus. Exynos
 	  Memory bus has one more group of memory bus (e.g, MIF and INT block).
@@ -98,7 +97,7 @@ config ARM_TEGRA_DEVFREQ
 		ARCH_TEGRA_132_SOC || ARCH_TEGRA_124_SOC || \
 		ARCH_TEGRA_210_SOC || \
 		COMPILE_TEST
-	select PM_OPP
+	depends on COMMON_CLK
 	help
 	  This adds the DEVFREQ driver for the Tegra family of SoCs.
 	  It reads ACTMON counters of memory controllers and adjusts the
@@ -109,7 +108,6 @@ config ARM_TEGRA20_DEVFREQ
 	depends on (TEGRA_MC && TEGRA20_EMC) || COMPILE_TEST
 	depends on COMMON_CLK
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
-	select PM_OPP
 	help
 	  This adds the DEVFREQ driver for the Tegra20 family of SoCs.
 	  It reads Memory Controller counters and adjusts the operating
@@ -121,7 +119,6 @@ config ARM_RK3399_DMC_DEVFREQ
 	select DEVFREQ_EVENT_ROCKCHIP_DFI
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
 	select PM_DEVFREQ_EVENT
-	select PM_OPP
 	help
           This adds the DEVFREQ driver for the RK3399 DMC(Dynamic Memory Controller).
           It sets the frequency for the memory controller and reads the usage counts

drivers/dma/dma-jz4780.c

@@ -999,7 +999,8 @@ static const struct jz4780_dma_soc_data jz4740_dma_soc_data = {
 static const struct jz4780_dma_soc_data jz4725b_dma_soc_data = {
 	.nb_channels = 6,
 	.transfer_ord_max = 5,
-	.flags = JZ_SOC_DATA_PER_CHAN_PM | JZ_SOC_DATA_NO_DCKES_DCKEC,
+	.flags = JZ_SOC_DATA_PER_CHAN_PM | JZ_SOC_DATA_NO_DCKES_DCKEC |
+		 JZ_SOC_DATA_BREAK_LINKS,
 };
 
 static const struct jz4780_dma_soc_data jz4770_dma_soc_data = {

drivers/dma/ioat/dma.c

@@ -377,10 +377,11 @@ ioat_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
 
 		descs->virt = dma_alloc_coherent(to_dev(ioat_chan),
 						 SZ_2M, &descs->hw, flags);
-		if (!descs->virt && (i > 0)) {
+		if (!descs->virt) {
 			int idx;
 
 			for (idx = 0; idx < i; idx++) {
+				descs = &ioat_chan->descs[idx];
 				dma_free_coherent(to_dev(ioat_chan), SZ_2M,
 						  descs->virt, descs->hw);
 				descs->virt = NULL;

drivers/dma/k3dma.c

@@ -229,9 +229,11 @@ static irqreturn_t k3_dma_int_handler(int irq, void *dev_id)
 			c = p->vchan;
 			if (c && (tc1 & BIT(i))) {
 				spin_lock_irqsave(&c->vc.lock, flags);
-				vchan_cookie_complete(&p->ds_run->vd);
+				if (p->ds_run != NULL) {
-				p->ds_done = p->ds_run;
+					vchan_cookie_complete(&p->ds_run->vd);
-				p->ds_run = NULL;
+					p->ds_done = p->ds_run;
+					p->ds_run = NULL;
+				}
 				spin_unlock_irqrestore(&c->vc.lock, flags);
 			}
 			if (c && (tc2 & BIT(i))) {
@@ -271,6 +273,10 @@ static int k3_dma_start_txd(struct k3_dma_chan *c)
 	if (BIT(c->phy->idx) & k3_dma_get_chan_stat(d))
 		return -EAGAIN;
 
+	/* Avoid losing track of  ds_run if a transaction is in flight */
+	if (c->phy->ds_run)
+		return -EAGAIN;
+
 	if (vd) {
 		struct k3_dma_desc_sw *ds =
 			container_of(vd, struct k3_dma_desc_sw, vd);

drivers/dma/virt-dma.c

@@ -104,9 +104,8 @@ static void vchan_complete(unsigned long arg)
 		dmaengine_desc_get_callback(&vd->tx, &cb);
 
 		list_del(&vd->node);
-		vchan_vdesc_fini(vd);
-
 		dmaengine_desc_callback_invoke(&cb, &vd->tx_result);
+		vchan_vdesc_fini(vd);
 	}
 }
 

drivers/firmware/broadcom/tee_bnxt_fw.c

@@ -215,7 +215,6 @@ static int tee_bnxt_fw_probe(struct device *dev)
 	fw_shm_pool = tee_shm_alloc(pvt_data.ctx, MAX_SHM_MEM_SZ,
 				    TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
 	if (IS_ERR(fw_shm_pool)) {
-		tee_client_close_context(pvt_data.ctx);
 		dev_err(pvt_data.dev, "tee_shm_alloc failed\n");
 		err = PTR_ERR(fw_shm_pool);
 		goto out_sess;

drivers/gpio/Kconfig

@@ -553,8 +553,8 @@ config GPIO_TEGRA
 
 config GPIO_TEGRA186
 	tristate "NVIDIA Tegra186 GPIO support"
-	default ARCH_TEGRA_186_SOC
+	default ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC
-	depends on ARCH_TEGRA_186_SOC || COMPILE_TEST
+	depends on ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC || COMPILE_TEST
 	depends on OF_GPIO
 	select GPIOLIB_IRQCHIP
 	select IRQ_DOMAIN_HIERARCHY
@@ -1148,6 +1148,7 @@ config GPIO_MADERA
 config GPIO_MAX77620
 	tristate "GPIO support for PMIC MAX77620 and MAX20024"
 	depends on MFD_MAX77620
+	select GPIOLIB_IRQCHIP
 	help
 	  GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor.
 	  MAX77620 PMIC has 8 pins that can be configured as GPIOs. The

drivers/gpio/gpio-aspeed-sgpio.c

@@ -107,7 +107,7 @@ static void __iomem *bank_reg(struct aspeed_sgpio *gpio,
 		return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
 	default:
 		/* acturally if code runs to here, it's an error case */
-		BUG_ON(1);
+		BUG();
 	}
 }
 

drivers/gpio/gpio-mockup.c

@@ -156,7 +156,7 @@ static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip,
 	mutex_lock(&chip->lock);
 
 	if (test_bit(FLAG_REQUESTED, &desc->flags) &&
-		!test_bit(FLAG_IS_OUT, &desc->flags)) {
+	    !test_bit(FLAG_IS_OUT, &desc->flags)) {
 		curr = __gpio_mockup_get(chip, offset);
 		if (curr == value)
 			goto out;
@@ -165,7 +165,7 @@ static int gpio_mockup_apply_pull(struct gpio_mockup_chip *chip,
 		irq_type = irq_get_trigger_type(irq);
 
 		if ((value == 1 && (irq_type & IRQ_TYPE_EDGE_RISING)) ||
-			(value == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING)))
+		    (value == 0 && (irq_type & IRQ_TYPE_EDGE_FALLING)))
 			irq_sim_fire(sim, offset);
 	}
 
@@ -226,7 +226,7 @@ static int gpio_mockup_get_direction(struct gpio_chip *gc, unsigned int offset)
 	int direction;
 
 	mutex_lock(&chip->lock);
-	direction = !chip->lines[offset].dir;
+	direction = chip->lines[offset].dir;
 	mutex_unlock(&chip->lock);
 
 	return direction;
@@ -395,7 +395,7 @@ static int gpio_mockup_probe(struct platform_device *pdev)
 	struct gpio_chip *gc;
 	struct device *dev;
 	const char *name;
-	int rv, base;
+	int rv, base, i;
 	u16 ngpio;
 
 	dev = &pdev->dev;
@@ -447,6 +447,9 @@ static int gpio_mockup_probe(struct platform_device *pdev)
 	if (!chip->lines)
 		return -ENOMEM;
 
+	for (i = 0; i < gc->ngpio; i++)
+		chip->lines[i].dir = GPIO_LINE_DIRECTION_IN;
+
 	if (device_property_read_bool(dev, "named-gpio-lines")) {
 		rv = gpio_mockup_name_lines(dev, chip);
 		if (rv)

drivers/gpio/gpio-mpc8xxx.c

@@ -346,6 +346,7 @@ static int mpc8xxx_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	gc = &mpc8xxx_gc->gc;
+	gc->parent = &pdev->dev;
 
 	if (of_property_read_bool(np, "little-endian")) {
 		ret = bgpio_init(gc, &pdev->dev, 4,

drivers/gpio/gpio-pca953x.c

@@ -568,16 +568,18 @@ static void pca953x_irq_mask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	chip->irq_mask[d->hwirq / BANK_SZ] &= ~BIT(d->hwirq % BANK_SZ);
+	clear_bit(hwirq, chip->irq_mask);
 }
 
 static void pca953x_irq_unmask(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	chip->irq_mask[d->hwirq / BANK_SZ] |= BIT(d->hwirq % BANK_SZ);
+	set_bit(hwirq, chip->irq_mask);
 }
 
 static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
@@ -635,8 +637,7 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
-	int bank_nb = d->hwirq / BANK_SZ;
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
-	u8 mask = BIT(d->hwirq % BANK_SZ);
 
 	if (!(type & IRQ_TYPE_EDGE_BOTH)) {
 		dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
@@ -644,15 +645,8 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
 		return -EINVAL;
 	}
 
-	if (type & IRQ_TYPE_EDGE_FALLING)
+	assign_bit(hwirq, chip->irq_trig_fall, type & IRQ_TYPE_EDGE_FALLING);
-		chip->irq_trig_fall[bank_nb] |= mask;
+	assign_bit(hwirq, chip->irq_trig_raise, type & IRQ_TYPE_EDGE_RISING);
-	else
-		chip->irq_trig_fall[bank_nb] &= ~mask;
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		chip->irq_trig_raise[bank_nb] |= mask;
-	else
-		chip->irq_trig_raise[bank_nb] &= ~mask;
 
 	return 0;
 }
@@ -661,10 +655,10 @@ static void pca953x_irq_shutdown(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct pca953x_chip *chip = gpiochip_get_data(gc);
-	u8 mask = BIT(d->hwirq % BANK_SZ);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask;
+	clear_bit(hwirq, chip->irq_trig_raise);
-	chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask;
+	clear_bit(hwirq, chip->irq_trig_fall);
 }
 
 static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pending)

drivers/gpio/gpio-xgs-iproc.c

@@ -280,7 +280,7 @@ static int iproc_gpio_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __exit iproc_gpio_remove(struct platform_device *pdev)
+static int iproc_gpio_remove(struct platform_device *pdev)
 {
 	struct iproc_gpio_chip *chip;
 

drivers/gpio/gpio-xtensa.c

@@ -44,15 +44,14 @@ static inline unsigned long enable_cp(unsigned long *cpenable)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	RSR_CPENABLE(*cpenable);
+	*cpenable = xtensa_get_sr(cpenable);
-	WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP));
+	xtensa_set_sr(*cpenable | BIT(XCHAL_CP_ID_XTIOP), cpenable);
-
 	return flags;
 }
 
 static inline void disable_cp(unsigned long flags, unsigned long cpenable)
 {
-	WSR_CPENABLE(cpenable);
+	xtensa_set_sr(cpenable, cpenable);
 	local_irq_restore(flags);
 }
 

drivers/gpio/gpio-zynq.c

@@ -684,6 +684,8 @@ static void zynq_gpio_restore_context(struct zynq_gpio *gpio)
 	unsigned int bank_num;
 
 	for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) {
+		writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr +
+				ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
 		writel_relaxed(gpio->context.datalsw[bank_num],
 			       gpio->base_addr +
 			       ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num));
@@ -693,9 +695,6 @@ static void zynq_gpio_restore_context(struct zynq_gpio *gpio)
 		writel_relaxed(gpio->context.dirm[bank_num],
 			       gpio->base_addr +
 			       ZYNQ_GPIO_DIRM_OFFSET(bank_num));
-		writel_relaxed(gpio->context.int_en[bank_num],
-			       gpio->base_addr +
-			       ZYNQ_GPIO_INTEN_OFFSET(bank_num));
 		writel_relaxed(gpio->context.int_type[bank_num],
 			       gpio->base_addr +
 			       ZYNQ_GPIO_INTTYPE_OFFSET(bank_num));
@@ -705,6 +704,9 @@ static void zynq_gpio_restore_context(struct zynq_gpio *gpio)
 		writel_relaxed(gpio->context.int_any[bank_num],
 			       gpio->base_addr +
 			       ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+		writel_relaxed(~(gpio->context.int_en[bank_num]),
+			       gpio->base_addr +
+			       ZYNQ_GPIO_INTEN_OFFSET(bank_num));
 	}
 }
 

drivers/gpio/gpiolib-acpi.c

@@ -21,11 +21,19 @@
 #include "gpiolib.h"
 #include "gpiolib-acpi.h"
 
+#define QUIRK_NO_EDGE_EVENTS_ON_BOOT		0x01l
+#define QUIRK_NO_WAKEUP				0x02l
+
 static int run_edge_events_on_boot = -1;
 module_param(run_edge_events_on_boot, int, 0444);
 MODULE_PARM_DESC(run_edge_events_on_boot,
 		 "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
 
+static int honor_wakeup = -1;
+module_param(honor_wakeup, int, 0444);
+MODULE_PARM_DESC(honor_wakeup,
+		 "Honor the ACPI wake-capable flag: 0=no, 1=yes, -1=auto");
+
 /**
  * struct acpi_gpio_event - ACPI GPIO event handler data
  *
@@ -281,7 +289,7 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
 	event->handle = evt_handle;
 	event->handler = handler;
 	event->irq = irq;
-	event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE;
+	event->irq_is_wake = honor_wakeup && agpio->wake_capable == ACPI_WAKE_CAPABLE;
 	event->pin = pin;
 	event->desc = desc;
 
@@ -1309,7 +1317,7 @@ static int acpi_gpio_handle_deferred_request_irqs(void)
 /* We must use _sync so that this runs after the first deferred_probe run */
 late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
 
-static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
+static const struct dmi_system_id gpiolib_acpi_quirks[] = {
 	{
 		/*
 		 * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
@@ -1319,7 +1327,8 @@ static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
-		}
+		},
+		.driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT,
 	},
 	{
 		/*
@@ -1331,20 +1340,52 @@ static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
-		}
+		},
+		.driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT,
+	},
+	{
+		/*
+		 * Various HP X2 10 Cherry Trail models use an external
+		 * embedded-controller connected via I2C + an ACPI GPIO
+		 * event handler. The embedded controller generates various
+		 * spurious wakeup events when suspended. So disable wakeup
+		 * for its handler (it uses the only ACPI GPIO event handler).
+		 * This breaks wakeup when opening the lid, the user needs
+		 * to press the power-button to wakeup the system. The
+		 * alternative is suspend simply not working, which is worse.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"),
+		},
+		.driver_data = (void *)QUIRK_NO_WAKEUP,
 	},
 	{} /* Terminating entry */
 };
 
 static int acpi_gpio_setup_params(void)
 {
+	const struct dmi_system_id *id;
+	long quirks = 0;
+
+	id = dmi_first_match(gpiolib_acpi_quirks);
+	if (id)
+		quirks = (long)id->driver_data;
+
 	if (run_edge_events_on_boot < 0) {
-		if (dmi_check_system(run_edge_events_on_boot_blacklist))
+		if (quirks & QUIRK_NO_EDGE_EVENTS_ON_BOOT)
 			run_edge_events_on_boot = 0;
 		else
 			run_edge_events_on_boot = 1;
 	}
 
+	if (honor_wakeup < 0) {
+		if (quirks & QUIRK_NO_WAKEUP)
+			honor_wakeup = 0;
+		else
+			honor_wakeup = 1;
+	}
+
 	return 0;
 }
 

drivers/gpio/gpiolib.c

@@ -220,6 +220,14 @@ int gpiod_get_direction(struct gpio_desc *desc)
 	chip = gpiod_to_chip(desc);
 	offset = gpio_chip_hwgpio(desc);
 
+	/*
+	 * Open drain emulation using input mode may incorrectly report
+	 * input here, fix that up.
+	 */
+	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags) &&
+	    test_bit(FLAG_IS_OUT, &desc->flags))
+		return 0;
+
 	if (!chip->get_direction)
 		return -ENOTSUPP;
 
@@ -4472,8 +4480,9 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
 
 		if (chip->ngpio <= p->chip_hwnum) {
 			dev_err(dev,
-				"requested GPIO %d is out of range [0..%d] for chip %s\n",
+				"requested GPIO %u (%u) is out of range [0..%u] for chip %s\n",
-				idx, chip->ngpio, chip->label);
+				idx, p->chip_hwnum, chip->ngpio - 1,
+				chip->label);
 			return ERR_PTR(-EINVAL);
 		}
 

drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c

@@ -613,7 +613,17 @@ static bool amdgpu_atpx_detect(void)
 	bool d3_supported = false;
 	struct pci_dev *parent_pdev;
 
-	while ((pdev = pci_get_class(PCI_BASE_CLASS_DISPLAY << 16, pdev)) != NULL) {
+	while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) {
+		vga_count++;
+
+		has_atpx |= (amdgpu_atpx_pci_probe_handle(pdev) == true);
+
+		parent_pdev = pci_upstream_bridge(pdev);
+		d3_supported |= parent_pdev && parent_pdev->bridge_d3;
+		amdgpu_atpx_get_quirks(pdev);
+	}
+
+	while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_OTHER << 8, pdev)) != NULL) {
 		vga_count++;
 
 		has_atpx |= (amdgpu_atpx_pci_probe_handle(pdev) == true);

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c

@@ -142,7 +142,7 @@ int amdgpu_async_gfx_ring = 1;
 int amdgpu_mcbp = 0;
 int amdgpu_discovery = -1;
 int amdgpu_mes = 0;
-int amdgpu_noretry = 1;
+int amdgpu_noretry;
 int amdgpu_force_asic_type = -1;
 
 struct amdgpu_mgpu_info mgpu_info = {
@@ -588,7 +588,7 @@ MODULE_PARM_DESC(mes,
 module_param_named(mes, amdgpu_mes, int, 0444);
 
 MODULE_PARM_DESC(noretry,
-	"Disable retry faults (0 = retry enabled, 1 = retry disabled (default))");
+	"Disable retry faults (0 = retry enabled (default), 1 = retry disabled)");
 module_param_named(noretry, amdgpu_noretry, int, 0644);
 
 /**
@@ -1359,7 +1359,8 @@ static struct drm_driver kms_driver = {
 	.driver_features =
 	    DRIVER_USE_AGP | DRIVER_ATOMIC |
 	    DRIVER_GEM |
-	    DRIVER_RENDER | DRIVER_MODESET | DRIVER_SYNCOBJ,
+	    DRIVER_RENDER | DRIVER_MODESET | DRIVER_SYNCOBJ |
+	    DRIVER_SYNCOBJ_TIMELINE,
 	.load = amdgpu_driver_load_kms,
 	.open = amdgpu_driver_open_kms,
 	.postclose = amdgpu_driver_postclose_kms,

drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c

@@ -1488,7 +1488,7 @@ out:
 
 		/* Start rlc autoload after psp recieved all the gfx firmware */
 		if (psp->autoload_supported && ucode->ucode_id == (amdgpu_sriov_vf(adev) ?
-		    AMDGPU_UCODE_ID_CP_MEC2 : AMDGPU_UCODE_ID_RLC_RESTORE_LIST_SRM_MEM)) {
+		    AMDGPU_UCODE_ID_CP_MEC2 : AMDGPU_UCODE_ID_RLC_G)) {
 			ret = psp_rlc_autoload(psp);
 			if (ret) {
 				DRM_ERROR("Failed to start rlc autoload\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h

@@ -292,10 +292,10 @@ enum AMDGPU_UCODE_ID {
 	AMDGPU_UCODE_ID_CP_MEC2_JT,
 	AMDGPU_UCODE_ID_CP_MES,
 	AMDGPU_UCODE_ID_CP_MES_DATA,
-	AMDGPU_UCODE_ID_RLC_G,
 	AMDGPU_UCODE_ID_RLC_RESTORE_LIST_CNTL,
 	AMDGPU_UCODE_ID_RLC_RESTORE_LIST_GPM_MEM,
 	AMDGPU_UCODE_ID_RLC_RESTORE_LIST_SRM_MEM,
+	AMDGPU_UCODE_ID_RLC_G,
 	AMDGPU_UCODE_ID_STORAGE,
 	AMDGPU_UCODE_ID_SMC,
 	AMDGPU_UCODE_ID_UVD,

drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c

@@ -1052,17 +1052,10 @@ static void gfx_v9_0_check_if_need_gfxoff(struct amdgpu_device *adev)
 	case CHIP_VEGA20:
 		break;
 	case CHIP_RAVEN:
-		/* Disable GFXOFF on original raven.  There are combinations
+		if (!(adev->rev_id >= 0x8 ||
-		 * of sbios and platforms that are not stable.
+		      adev->pdev->device == 0x15d8) &&
-		 */
+		    (adev->pm.fw_version < 0x41e2b || /* not raven1 fresh */
-		if (!(adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8))
+		     !adev->gfx.rlc.is_rlc_v2_1)) /* without rlc save restore ucodes */
-			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
-		else if (!(adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8)
-			 &&((adev->gfx.rlc_fw_version != 106 &&
-			     adev->gfx.rlc_fw_version < 531) ||
-			    (adev->gfx.rlc_fw_version == 53815) ||
-			    (adev->gfx.rlc_feature_version < 1) ||
-			    !adev->gfx.rlc.is_rlc_v2_1))
 			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
 
 		if (adev->pm.pp_feature & PP_GFXOFF_MASK)

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -3356,27 +3356,21 @@ get_output_color_space(const struct dc_crtc_timing *dc_crtc_timing)
 	return color_space;
 }
 
-static void reduce_mode_colour_depth(struct dc_crtc_timing *timing_out)
+static bool adjust_colour_depth_from_display_info(
-{
+	struct dc_crtc_timing *timing_out,
-	if (timing_out->display_color_depth <= COLOR_DEPTH_888)
+	const struct drm_display_info *info)
-		return;
-
-	timing_out->display_color_depth--;
-}
-
-static void adjust_colour_depth_from_display_info(struct dc_crtc_timing *timing_out,
-						const struct drm_display_info *info)
 {
+	enum dc_color_depth depth = timing_out->display_color_depth;
 	int normalized_clk;
-	if (timing_out->display_color_depth <= COLOR_DEPTH_888)
-		return;
 	do {
 		normalized_clk = timing_out->pix_clk_100hz / 10;
 		/* YCbCr 4:2:0 requires additional adjustment of 1/2 */
 		if (timing_out->pixel_encoding == PIXEL_ENCODING_YCBCR420)
 			normalized_clk /= 2;
 		/* Adjusting pix clock following on HDMI spec based on colour depth */
-		switch (timing_out->display_color_depth) {
+		switch (depth) {
+		case COLOR_DEPTH_888:
+			break;
 		case COLOR_DEPTH_101010:
 			normalized_clk = (normalized_clk * 30) / 24;
 			break;
@@ -3387,14 +3381,15 @@ static void adjust_colour_depth_from_display_info(struct dc_crtc_timing *timing_
 			normalized_clk = (normalized_clk * 48) / 24;
 			break;
 		default:
-			return;
+			/* The above depths are the only ones valid for HDMI. */
+			return false;
 		}
-		if (normalized_clk <= info->max_tmds_clock)
+		if (normalized_clk <= info->max_tmds_clock) {
-			return;
+			timing_out->display_color_depth = depth;
-		reduce_mode_colour_depth(timing_out);
+			return true;
-
+		}
-	} while (timing_out->display_color_depth > COLOR_DEPTH_888);
+	} while (--depth > COLOR_DEPTH_666);
-
+	return false;
 }
 
 static void fill_stream_properties_from_drm_display_mode(
@@ -3474,8 +3469,14 @@ static void fill_stream_properties_from_drm_display_mode(
 
 	stream->out_transfer_func->type = TF_TYPE_PREDEFINED;
 	stream->out_transfer_func->tf = TRANSFER_FUNCTION_SRGB;
-	if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A)
+	if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A) {
-		adjust_colour_depth_from_display_info(timing_out, info);
+		if (!adjust_colour_depth_from_display_info(timing_out, info) &&
+		    drm_mode_is_420_also(info, mode_in) &&
+		    timing_out->pixel_encoding != PIXEL_ENCODING_YCBCR420) {
+			timing_out->pixel_encoding = PIXEL_ENCODING_YCBCR420;
+			adjust_colour_depth_from_display_info(timing_out, info);
+		}
+	}
 }
 
 static void fill_audio_info(struct audio_info *audio_info,

drivers/gpu/drm/amd/powerplay/amdgpu_smu.c

@@ -866,6 +866,7 @@ static int smu_sw_init(void *handle)
 	smu->smu_baco.platform_support = false;
 
 	mutex_init(&smu->sensor_lock);
+	mutex_init(&smu->metrics_lock);
 
 	smu->watermarks_bitmap = 0;
 	smu->power_profile_mode = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT;

drivers/gpu/drm/amd/powerplay/arcturus_ppt.c

@@ -862,18 +862,21 @@ static int arcturus_get_metrics_table(struct smu_context *smu,
 	struct smu_table_context *smu_table= &smu->smu_table;
 	int ret = 0;
 
+	mutex_lock(&smu->metrics_lock);
 	if (!smu_table->metrics_time ||
 	     time_after(jiffies, smu_table->metrics_time + HZ / 1000)) {
 		ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0,
 				(void *)smu_table->metrics_table, false);
 		if (ret) {
 			pr_info("Failed to export SMU metrics table!\n");
+			mutex_unlock(&smu->metrics_lock);
 			return ret;
 		}
 		smu_table->metrics_time = jiffies;
 	}
 
 	memcpy(metrics_table, smu_table->metrics_table, sizeof(SmuMetrics_t));
+	mutex_unlock(&smu->metrics_lock);
 
 	return ret;
 }

drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h

@@ -349,6 +349,7 @@ struct smu_context
 	const struct pptable_funcs	*ppt_funcs;
 	struct mutex			mutex;
 	struct mutex			sensor_lock;
+	struct mutex			metrics_lock;
 	uint64_t pool_size;
 
 	struct smu_table_context	smu_table;

drivers/gpu/drm/amd/powerplay/navi10_ppt.c

@@ -562,17 +562,20 @@ static int navi10_get_metrics_table(struct smu_context *smu,
 	struct smu_table_context *smu_table= &smu->smu_table;
 	int ret = 0;
 
+	mutex_lock(&smu->metrics_lock);
 	if (!smu_table->metrics_time || time_after(jiffies, smu_table->metrics_time + msecs_to_jiffies(100))) {
 		ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0,
 				(void *)smu_table->metrics_table, false);
 		if (ret) {
 			pr_info("Failed to export SMU metrics table!\n");
+			mutex_unlock(&smu->metrics_lock);
 			return ret;
 		}
 		smu_table->metrics_time = jiffies;
 	}
 
 	memcpy(metrics_table, smu_table->metrics_table, sizeof(SmuMetrics_t));
+	mutex_unlock(&smu->metrics_lock);
 
 	return ret;
 }

drivers/gpu/drm/amd/powerplay/vega20_ppt.c

@@ -1678,17 +1678,20 @@ static int vega20_get_metrics_table(struct smu_context *smu,
 	struct smu_table_context *smu_table= &smu->smu_table;
 	int ret = 0;
 
+	mutex_lock(&smu->metrics_lock);
 	if (!smu_table->metrics_time || time_after(jiffies, smu_table->metrics_time + HZ / 1000)) {
 		ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0,
 				(void *)smu_table->metrics_table, false);
 		if (ret) {
 			pr_info("Failed to export SMU metrics table!\n");
+			mutex_unlock(&smu->metrics_lock);
 			return ret;
 		}
 		smu_table->metrics_time = jiffies;
 	}
 
 	memcpy(metrics_table, smu_table->metrics_table, sizeof(SmuMetrics_t));
+	mutex_unlock(&smu->metrics_lock);
 
 	return ret;
 }

drivers/gpu/drm/arm/malidp_mw.c

@@ -56,7 +56,7 @@ malidp_mw_connector_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-const struct drm_connector_helper_funcs malidp_mw_connector_helper_funcs = {
+static const struct drm_connector_helper_funcs malidp_mw_connector_helper_funcs = {
 	.get_modes = malidp_mw_connector_get_modes,
 	.mode_valid = malidp_mw_connector_mode_valid,
 };

drivers/gpu/drm/drm_dp_mst_topology.c

@@ -393,7 +393,7 @@ drm_dp_encode_sideband_req(const struct drm_dp_sideband_msg_req_body *req,
 			memcpy(&buf[idx], req->u.i2c_read.transactions[i].bytes, req->u.i2c_read.transactions[i].num_bytes);
 			idx += req->u.i2c_read.transactions[i].num_bytes;
 
-			buf[idx] = (req->u.i2c_read.transactions[i].no_stop_bit & 0x1) << 5;
+			buf[idx] = (req->u.i2c_read.transactions[i].no_stop_bit & 0x1) << 4;
 			buf[idx] |= (req->u.i2c_read.transactions[i].i2c_transaction_delay & 0xf);
 			idx++;
 		}