mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 14:42:24 +00:00
i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
This I2C module is integrated into the Loongson-2K SoCs and Loongson LS7A bridge chip. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
This commit is contained in:
Binbin Zhou
Wolfram Sang
parent
57b2ba483c
commit
015e61f0bf
@ -761,6 +761,17 @@ config I2C_LPC2K
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-lpc2k.
|
||||
|
||||
config I2C_LS2X
|
||||
tristate "Loongson LS2X I2C adapter"
|
||||
depends on MACH_LOONGSON64 || COMPILE_TEST
|
||||
help
|
||||
If you say yes to this option, support will be included for the
|
||||
I2C interface on the Loongson-2K SoCs and Loongson LS7A bridge
|
||||
chip.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-ls2x.
|
||||
|
||||
config I2C_MLXBF
|
||||
tristate "Mellanox BlueField I2C controller"
|
||||
depends on MELLANOX_PLATFORM && ARM64
|
||||
|
||||
@ -77,6 +77,7 @@ obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
|
||||
obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
|
||||
obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
|
||||
obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o
|
||||
obj-$(CONFIG_I2C_LS2X) += i2c-ls2x.o
|
||||
obj-$(CONFIG_I2C_MESON) += i2c-meson.o
|
||||
obj-$(CONFIG_I2C_MICROCHIP_CORE) += i2c-microchip-corei2c.o
|
||||
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
|
||||
|
||||
370
drivers/i2c/busses/i2c-ls2x.c
Normal file
370
drivers/i2c/busses/i2c-ls2x.c
Normal file
@ -0,0 +1,370 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Loongson-2K/Loongson LS7A I2C master mode driver
|
||||
*
|
||||
* Copyright (C) 2013 Loongson Technology Corporation Limited.
|
||||
* Copyright (C) 2014-2017 Lemote, Inc.
|
||||
* Copyright (C) 2018-2022 Loongson Technology Corporation Limited.
|
||||
*
|
||||
* Originally written by liushaozong
|
||||
* Rewritten for mainline by Binbin Zhou <zhoubinbin@loongson.cn>
|
||||
*/
|
||||
|
||||
#include <linux/bits.h>
|
||||
#include <linux/completion.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/iopoll.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/property.h>
|
||||
#include <linux/units.h>
|
||||
|
||||
/* I2C Registers */
|
||||
#define I2C_LS2X_PRER 0x0 /* Freq Division Register(16 bits) */
|
||||
#define I2C_LS2X_CTR 0x2 /* Control Register */
|
||||
#define I2C_LS2X_TXR 0x3 /* Transport Data Register */
|
||||
#define I2C_LS2X_RXR 0x3 /* Receive Data Register */
|
||||
#define I2C_LS2X_CR 0x4 /* Command Control Register */
|
||||
#define I2C_LS2X_SR 0x4 /* State Register */
|
||||
|
||||
/* Command Control Register Bit */
|
||||
#define LS2X_CR_START BIT(7) /* Start signal */
|
||||
#define LS2X_CR_STOP BIT(6) /* Stop signal */
|
||||
#define LS2X_CR_READ BIT(5) /* Read signal */
|
||||
#define LS2X_CR_WRITE BIT(4) /* Write signal */
|
||||
#define LS2X_CR_ACK BIT(3) /* Response signal */
|
||||
#define LS2X_CR_IACK BIT(0) /* Interrupt response signal */
|
||||
|
||||
/* State Register Bit */
|
||||
#define LS2X_SR_NOACK BIT(7) /* Receive NACK */
|
||||
#define LS2X_SR_BUSY BIT(6) /* Bus busy state */
|
||||
#define LS2X_SR_AL BIT(5) /* Arbitration lost */
|
||||
#define LS2X_SR_TIP BIT(1) /* Transmission state */
|
||||
#define LS2X_SR_IF BIT(0) /* Interrupt flag */
|
||||
|
||||
/* Control Register Bit */
|
||||
#define LS2X_CTR_EN BIT(7) /* 0: I2c frequency setting 1: Normal */
|
||||
#define LS2X_CTR_IEN BIT(6) /* Enable i2c interrupt */
|
||||
#define LS2X_CTR_MST BIT(5) /* 0: Slave mode 1: Master mode */
|
||||
#define CTR_FREQ_MASK GENMASK(7, 6)
|
||||
#define CTR_READY_MASK GENMASK(7, 5)
|
||||
|
||||
/* The PCLK frequency from LPB */
|
||||
#define LS2X_I2C_PCLK_FREQ (50 * HZ_PER_MHZ)
|
||||
|
||||
/* The default bus frequency, which is an empirical value */
|
||||
#define LS2X_I2C_FREQ_STD (33 * HZ_PER_KHZ)
|
||||
|
||||
struct ls2x_i2c_priv {
|
||||
struct i2c_adapter adapter;
|
||||
void __iomem *base;
|
||||
struct i2c_timings i2c_t;
|
||||
struct completion cmd_complete;
|
||||
};
|
||||
|
||||
/*
|
||||
* Interrupt service routine.
|
||||
* This gets called whenever an I2C interrupt occurs.
|
||||
*/
|
||||
static irqreturn_t ls2x_i2c_isr(int this_irq, void *dev_id)
|
||||
{
|
||||
struct ls2x_i2c_priv *priv = dev_id;
|
||||
|
||||
if (!(readb(priv->base + I2C_LS2X_SR) & LS2X_SR_IF))
|
||||
return IRQ_NONE;
|
||||
|
||||
writeb(LS2X_CR_IACK, priv->base + I2C_LS2X_CR);
|
||||
complete(&priv->cmd_complete);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*
|
||||
* The ls2x i2c controller supports standard mode and fast mode, so the
|
||||
* maximum bus frequency is '400kHz'.
|
||||
* The bus frequency is set to the empirical value of '33KHz' by default,
|
||||
* but it can also be taken from ACPI or FDT for compatibility with more
|
||||
* devices.
|
||||
*/
|
||||
static void ls2x_i2c_adjust_bus_speed(struct ls2x_i2c_priv *priv)
|
||||
{
|
||||
struct i2c_timings *t = &priv->i2c_t;
|
||||
struct device *dev = priv->adapter.dev.parent;
|
||||
u32 acpi_speed = i2c_acpi_find_bus_speed(dev);
|
||||
|
||||
i2c_parse_fw_timings(dev, t, false);
|
||||
|
||||
if (acpi_speed || t->bus_freq_hz)
|
||||
t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
|
||||
else
|
||||
t->bus_freq_hz = LS2X_I2C_FREQ_STD;
|
||||
|
||||
/* Calculate and set i2c frequency. */
|
||||
writew(LS2X_I2C_PCLK_FREQ / (5 * t->bus_freq_hz) - 1,
|
||||
priv->base + I2C_LS2X_PRER);
|
||||
}
|
||||
|
||||
static void ls2x_i2c_init(struct ls2x_i2c_priv *priv)
|
||||
{
|
||||
/* Set i2c frequency setting mode and disable interrupts. */
|
||||
writeb(readb(priv->base + I2C_LS2X_CTR) & ~CTR_FREQ_MASK,
|
||||
priv->base + I2C_LS2X_CTR);
|
||||
|
||||
ls2x_i2c_adjust_bus_speed(priv);
|
||||
|
||||
/* Set i2c normal operating mode and enable interrupts. */
|
||||
writeb(readb(priv->base + I2C_LS2X_CTR) | CTR_READY_MASK,
|
||||
priv->base + I2C_LS2X_CTR);
|
||||
}
|
||||
|
||||
static int ls2x_i2c_xfer_byte(struct ls2x_i2c_priv *priv, u8 txdata, u8 *rxdatap)
|
||||
{
|
||||
u8 rxdata;
|
||||
unsigned long time_left;
|
||||
|
||||
writeb(txdata, priv->base + I2C_LS2X_CR);
|
||||
|
||||
time_left = wait_for_completion_timeout(&priv->cmd_complete,
|
||||
priv->adapter.timeout);
|
||||
if (!time_left)
|
||||
return -ETIMEDOUT;
|
||||
|
||||
rxdata = readb(priv->base + I2C_LS2X_SR);
|
||||
if (rxdatap)
|
||||
*rxdatap = rxdata;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls2x_i2c_send_byte(struct ls2x_i2c_priv *priv, u8 txdata)
|
||||
{
|
||||
int ret;
|
||||
u8 rxdata;
|
||||
|
||||
ret = ls2x_i2c_xfer_byte(priv, txdata, &rxdata);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (rxdata & LS2X_SR_AL)
|
||||
return -EAGAIN;
|
||||
|
||||
if (rxdata & LS2X_SR_NOACK)
|
||||
return -ENXIO;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls2x_i2c_stop(struct ls2x_i2c_priv *priv)
|
||||
{
|
||||
u8 value;
|
||||
|
||||
writeb(LS2X_CR_STOP, priv->base + I2C_LS2X_CR);
|
||||
return readb_poll_timeout(priv->base + I2C_LS2X_SR, value,
|
||||
!(value & LS2X_SR_BUSY), 100,
|
||||
jiffies_to_usecs(priv->adapter.timeout));
|
||||
}
|
||||
|
||||
static int ls2x_i2c_start(struct ls2x_i2c_priv *priv, struct i2c_msg *msgs)
|
||||
{
|
||||
reinit_completion(&priv->cmd_complete);
|
||||
|
||||
writeb(i2c_8bit_addr_from_msg(msgs), priv->base + I2C_LS2X_TXR);
|
||||
return ls2x_i2c_send_byte(priv, LS2X_CR_START | LS2X_CR_WRITE);
|
||||
}
|
||||
|
||||
static int ls2x_i2c_rx(struct ls2x_i2c_priv *priv, struct i2c_msg *msg)
|
||||
{
|
||||
int ret;
|
||||
u8 rxdata, *buf = msg->buf;
|
||||
u16 len = msg->len;
|
||||
|
||||
/* Contains steps to send start condition and address. */
|
||||
ret = ls2x_i2c_start(priv, msg);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
while (len--) {
|
||||
ret = ls2x_i2c_xfer_byte(priv,
|
||||
LS2X_CR_READ | (len ? 0 : LS2X_CR_ACK),
|
||||
&rxdata);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
*buf++ = readb(priv->base + I2C_LS2X_RXR);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls2x_i2c_tx(struct ls2x_i2c_priv *priv, struct i2c_msg *msg)
|
||||
{
|
||||
int ret;
|
||||
u8 *buf = msg->buf;
|
||||
u16 len = msg->len;
|
||||
|
||||
/* Contains steps to send start condition and address. */
|
||||
ret = ls2x_i2c_start(priv, msg);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
while (len--) {
|
||||
writeb(*buf++, priv->base + I2C_LS2X_TXR);
|
||||
|
||||
ret = ls2x_i2c_send_byte(priv, LS2X_CR_WRITE);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls2x_i2c_xfer_one(struct ls2x_i2c_priv *priv,
|
||||
struct i2c_msg *msg, bool stop)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (msg->flags & I2C_M_RD)
|
||||
ret = ls2x_i2c_rx(priv, msg);
|
||||
else
|
||||
ret = ls2x_i2c_tx(priv, msg);
|
||||
|
||||
if (ret < 0) {
|
||||
/* Fatel error. Needs reinit. */
|
||||
if (ret == -ETIMEDOUT)
|
||||
ls2x_i2c_init(priv);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (stop) {
|
||||
/* Failed to issue STOP. Needs reinit. */
|
||||
ret = ls2x_i2c_stop(priv);
|
||||
if (ret)
|
||||
ls2x_i2c_init(priv);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ls2x_i2c_master_xfer(struct i2c_adapter *adap,
|
||||
struct i2c_msg *msgs, int num)
|
||||
{
|
||||
int ret;
|
||||
struct i2c_msg *msg, *emsg = msgs + num;
|
||||
struct ls2x_i2c_priv *priv = i2c_get_adapdata(adap);
|
||||
|
||||
for (msg = msgs; msg < emsg; msg++) {
|
||||
ret = ls2x_i2c_xfer_one(priv, msg, msg == emsg - 1);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return num;
|
||||
}
|
||||
|
||||
static unsigned int ls2x_i2c_func(struct i2c_adapter *adap)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
||||
}
|
||||
|
||||
static const struct i2c_algorithm ls2x_i2c_algo = {
|
||||
.master_xfer = ls2x_i2c_master_xfer,
|
||||
.functionality = ls2x_i2c_func,
|
||||
};
|
||||
|
||||
static int ls2x_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret, irq;
|
||||
struct i2c_adapter *adap;
|
||||
struct ls2x_i2c_priv *priv;
|
||||
struct device *dev = &pdev->dev;
|
||||
|
||||
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
/* Map hardware registers */
|
||||
priv->base = devm_platform_ioremap_resource(pdev, 0);
|
||||
if (IS_ERR(priv->base))
|
||||
return PTR_ERR(priv->base);
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if (irq < 0)
|
||||
return irq;
|
||||
|
||||
/* Add the i2c adapter */
|
||||
adap = &priv->adapter;
|
||||
adap->retries = 5;
|
||||
adap->nr = pdev->id;
|
||||
adap->dev.parent = dev;
|
||||
adap->owner = THIS_MODULE;
|
||||
adap->algo = &ls2x_i2c_algo;
|
||||
adap->timeout = msecs_to_jiffies(100);
|
||||
device_set_node(&adap->dev, dev_fwnode(dev));
|
||||
i2c_set_adapdata(adap, priv);
|
||||
strscpy(adap->name, pdev->name, sizeof(adap->name));
|
||||
init_completion(&priv->cmd_complete);
|
||||
platform_set_drvdata(pdev, priv);
|
||||
|
||||
ls2x_i2c_init(priv);
|
||||
|
||||
ret = devm_request_irq(dev, irq, ls2x_i2c_isr, IRQF_SHARED, "ls2x-i2c",
|
||||
priv);
|
||||
if (ret < 0)
|
||||
return dev_err_probe(dev, ret, "Unable to request irq %d\n", irq);
|
||||
|
||||
return devm_i2c_add_adapter(dev, adap);
|
||||
}
|
||||
|
||||
static int ls2x_i2c_suspend(struct device *dev)
|
||||
{
|
||||
struct ls2x_i2c_priv *priv = dev_get_drvdata(dev);
|
||||
|
||||
/* Disable interrupts */
|
||||
writeb(readb(priv->base + I2C_LS2X_CTR) & ~LS2X_CTR_IEN,
|
||||
priv->base + I2C_LS2X_CTR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ls2x_i2c_resume(struct device *dev)
|
||||
{
|
||||
ls2x_i2c_init(dev_get_drvdata(dev));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static DEFINE_RUNTIME_DEV_PM_OPS(ls2x_i2c_pm_ops,
|
||||
ls2x_i2c_suspend, ls2x_i2c_resume, NULL);
|
||||
|
||||
static const struct of_device_id ls2x_i2c_id_table[] = {
|
||||
{ .compatible = "loongson,ls2k-i2c" },
|
||||
{ .compatible = "loongson,ls7a-i2c" },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ls2x_i2c_id_table);
|
||||
|
||||
static const struct acpi_device_id ls2x_i2c_acpi_match[] = {
|
||||
{ "LOON0004" }, /* Loongson LS7A */
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(acpi, ls2x_i2c_acpi_match);
|
||||
|
||||
static struct platform_driver ls2x_i2c_driver = {
|
||||
.probe = ls2x_i2c_probe,
|
||||
.driver = {
|
||||
.name = "ls2x-i2c",
|
||||
.pm = pm_sleep_ptr(&ls2x_i2c_pm_ops),
|
||||
.of_match_table = ls2x_i2c_id_table,
|
||||
.acpi_match_table = ls2x_i2c_acpi_match,
|
||||
},
|
||||
};
|
||||
module_platform_driver(ls2x_i2c_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Loongson LS2X I2C Bus driver");
|
||||
MODULE_AUTHOR("Loongson Technology Corporation Limited");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user