linux/fs/ext4/extents.c

5736 lines
156 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2003-2006, Cluster File Systems, Inc, info@clusterfs.com
* Written by Alex Tomas <alex@clusterfs.com>
*
* Architecture independence:
* Copyright (c) 2005, Bull S.A.
* Written by Pierre Peiffer <pierre.peiffer@bull.net>
*/
/*
* Extents support for EXT4
*
* TODO:
* - ext4*_error() should be used in some situations
* - analyze all BUG()/BUG_ON(), use -EIO where appropriate
* - smart tree reduction
*/
#include <linux/fs.h>
#include <linux/time.h>
#include <linux/jbd2.h>
#include <linux/highuid.h>
#include <linux/pagemap.h>
#include <linux/quotaops.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/fiemap.h>
#include <linux/backing-dev.h>
#include <linux/iomap.h>
#include "ext4_jbd2.h"
#include "ext4_extents.h"
#include "xattr.h"
#include <trace/events/ext4.h>
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
/*
* used by extent splitting.
*/
#define EXT4_EXT_MAY_ZEROOUT 0x1 /* safe to zeroout if split fails \
due to ENOSPC */
#define EXT4_EXT_MARK_UNWRIT1 0x2 /* mark first half unwritten */
#define EXT4_EXT_MARK_UNWRIT2 0x4 /* mark second half unwritten */
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
#define EXT4_EXT_DATA_VALID1 0x8 /* first half contains valid data */
#define EXT4_EXT_DATA_VALID2 0x10 /* second half contains valid data */
static __le32 ext4_extent_block_csum(struct inode *inode,
struct ext4_extent_header *eh)
{
struct ext4_inode_info *ei = EXT4_I(inode);
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
__u32 csum;
csum = ext4_chksum(sbi, ei->i_csum_seed, (__u8 *)eh,
EXT4_EXTENT_TAIL_OFFSET(eh));
return cpu_to_le32(csum);
}
static int ext4_extent_block_csum_verify(struct inode *inode,
struct ext4_extent_header *eh)
{
struct ext4_extent_tail *et;
if (!ext4_has_metadata_csum(inode->i_sb))
return 1;
et = find_ext4_extent_tail(eh);
if (et->et_checksum != ext4_extent_block_csum(inode, eh))
return 0;
return 1;
}
static void ext4_extent_block_csum_set(struct inode *inode,
struct ext4_extent_header *eh)
{
struct ext4_extent_tail *et;
if (!ext4_has_metadata_csum(inode->i_sb))
return;
et = find_ext4_extent_tail(eh);
et->et_checksum = ext4_extent_block_csum(inode, eh);
}
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
static int ext4_split_extent_at(handle_t *handle,
struct inode *inode,
struct ext4_ext_path **ppath,
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
ext4_lblk_t split,
int split_flag,
int flags);
static int ext4_ext_trunc_restart_fn(struct inode *inode, int *dropped)
{
/*
* Drop i_data_sem to avoid deadlock with ext4_map_blocks. At this
* moment, get_block can be called only for blocks inside i_size since
* page cache has been already dropped and writes are blocked by
* i_mutex. So we can safely drop the i_data_sem here.
*/
BUG_ON(EXT4_JOURNAL(inode) == NULL);
ext4_discard_preallocations(inode);
up_write(&EXT4_I(inode)->i_data_sem);
*dropped = 1;
return 0;
}
/*
* Make sure 'handle' has at least 'check_cred' credits. If not, restart
* transaction with 'restart_cred' credits. The function drops i_data_sem
* when restarting transaction and gets it after transaction is restarted.
*
* The function returns 0 on success, 1 if transaction had to be restarted,
* and < 0 in case of fatal error.
*/
int ext4_datasem_ensure_credits(handle_t *handle, struct inode *inode,
int check_cred, int restart_cred,
int revoke_cred)
{
int ret;
int dropped = 0;
ret = ext4_journal_ensure_credits_fn(handle, check_cred, restart_cred,
revoke_cred, ext4_ext_trunc_restart_fn(inode, &dropped));
if (dropped)
down_write(&EXT4_I(inode)->i_data_sem);
return ret;
}
/*
* could return:
* - EROFS
* - ENOMEM
*/
static int ext4_ext_get_access(handle_t *handle, struct inode *inode,
struct ext4_ext_path *path)
{
if (path->p_bh) {
/* path points to block */
BUFFER_TRACE(path->p_bh, "get_write_access");
return ext4_journal_get_write_access(handle, path->p_bh);
}
/* path points to leaf/index in inode body */
/* we use in-core data, no need to protect them */
return 0;
}
/*
* could return:
* - EROFS
* - ENOMEM
* - EIO
*/
static int __ext4_ext_dirty(const char *where, unsigned int line,
handle_t *handle, struct inode *inode,
struct ext4_ext_path *path)
{
int err;
WARN_ON(!rwsem_is_locked(&EXT4_I(inode)->i_data_sem));
if (path->p_bh) {
ext4_extent_block_csum_set(inode, ext_block_hdr(path->p_bh));
/* path points to block */
err = __ext4_handle_dirty_metadata(where, line, handle,
inode, path->p_bh);
} else {
/* path points to leaf/index in inode body */
err = ext4_mark_inode_dirty(handle, inode);
}
return err;
}
#define ext4_ext_dirty(handle, inode, path) \
__ext4_ext_dirty(__func__, __LINE__, (handle), (inode), (path))
static ext4_fsblk_t ext4_ext_find_goal(struct inode *inode,
struct ext4_ext_path *path,
ext4_lblk_t block)
{
if (path) {
int depth = path->p_depth;
struct ext4_extent *ex;
ext4: fix 32bit overflow in ext4_ext_find_goal() ext4_ext_find_goal() returns an ideal physical block number that the block allocator tries to allocate first. However, if a required file offset is smaller than the existing extent's one, ext4_ext_find_goal() returns a wrong block number because it may overflow at "block - le32_to_cpu(ex->ee_block)". This patch fixes the problem. ext4_ext_find_goal() will also return a wrong block number in case a file offset of the existing extent is too big. In this case, the ideal physical block number is fixed in ext4_mb_initialize_context(), so it's no problem. reproduce: # dd if=/dev/zero of=/mnt/mp1/tmp bs=127M count=1 oflag=sync # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 seek=1 oflag=sync # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 128 67456 128 eof /mnt/mp1/file: 2 extents found # rm -rf /mnt/mp1/tmp # echo $((512*4096)) > /sys/fs/ext4/loop0/mb_stream_req # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 oflag=sync conv=notrunc result (linux-2.6.37-rc2 + ext4 patch queue): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 33280 128 1 128 67456 33407 128 eof /mnt/mp1/file: 2 extents found result(apply this patch): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 66560 128 1 128 67456 66687 128 eof /mnt/mp1/file: 2 extents found Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10 17:12:28 +00:00
/*
* Try to predict block placement assuming that we are
* filling in a file which will eventually be
* non-sparse --- i.e., in the case of libbfd writing
* an ELF object sections out-of-order but in a way
* the eventually results in a contiguous object or
* executable file, or some database extending a table
* space file. However, this is actually somewhat
* non-ideal if we are writing a sparse file such as
* qemu or KVM writing a raw image file that is going
* to stay fairly sparse, since it will end up
* fragmenting the file system's free space. Maybe we
* should have some hueristics or some way to allow
* userspace to pass a hint to file system,
* especially if the latter case turns out to be
ext4: fix 32bit overflow in ext4_ext_find_goal() ext4_ext_find_goal() returns an ideal physical block number that the block allocator tries to allocate first. However, if a required file offset is smaller than the existing extent's one, ext4_ext_find_goal() returns a wrong block number because it may overflow at "block - le32_to_cpu(ex->ee_block)". This patch fixes the problem. ext4_ext_find_goal() will also return a wrong block number in case a file offset of the existing extent is too big. In this case, the ideal physical block number is fixed in ext4_mb_initialize_context(), so it's no problem. reproduce: # dd if=/dev/zero of=/mnt/mp1/tmp bs=127M count=1 oflag=sync # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 seek=1 oflag=sync # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 128 67456 128 eof /mnt/mp1/file: 2 extents found # rm -rf /mnt/mp1/tmp # echo $((512*4096)) > /sys/fs/ext4/loop0/mb_stream_req # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 oflag=sync conv=notrunc result (linux-2.6.37-rc2 + ext4 patch queue): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 33280 128 1 128 67456 33407 128 eof /mnt/mp1/file: 2 extents found result(apply this patch): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 66560 128 1 128 67456 66687 128 eof /mnt/mp1/file: 2 extents found Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10 17:12:28 +00:00
* common.
*/
ex = path[depth].p_ext;
ext4: fix 32bit overflow in ext4_ext_find_goal() ext4_ext_find_goal() returns an ideal physical block number that the block allocator tries to allocate first. However, if a required file offset is smaller than the existing extent's one, ext4_ext_find_goal() returns a wrong block number because it may overflow at "block - le32_to_cpu(ex->ee_block)". This patch fixes the problem. ext4_ext_find_goal() will also return a wrong block number in case a file offset of the existing extent is too big. In this case, the ideal physical block number is fixed in ext4_mb_initialize_context(), so it's no problem. reproduce: # dd if=/dev/zero of=/mnt/mp1/tmp bs=127M count=1 oflag=sync # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 seek=1 oflag=sync # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 128 67456 128 eof /mnt/mp1/file: 2 extents found # rm -rf /mnt/mp1/tmp # echo $((512*4096)) > /sys/fs/ext4/loop0/mb_stream_req # dd if=/dev/zero of=/mnt/mp1/file bs=512K count=1 oflag=sync conv=notrunc result (linux-2.6.37-rc2 + ext4 patch queue): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 33280 128 1 128 67456 33407 128 eof /mnt/mp1/file: 2 extents found result(apply this patch): # filefrag -v /mnt/mp1/file Filesystem type is: ef53 File size of /mnt/mp1/file is 1048576 (256 blocks, blocksize 4096) ext logical physical expected length flags 0 0 66560 128 1 128 67456 66687 128 eof /mnt/mp1/file: 2 extents found Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10 17:12:28 +00:00
if (ex) {
ext4_fsblk_t ext_pblk = ext4_ext_pblock(ex);
ext4_lblk_t ext_block = le32_to_cpu(ex->ee_block);
if (block > ext_block)
return ext_pblk + (block - ext_block);
else
return ext_pblk - (ext_block - block);
}
/* it looks like index is empty;
* try to find starting block from index itself */
if (path[depth].p_bh)
return path[depth].p_bh->b_blocknr;
}
/* OK. use inode's group */
return ext4_inode_to_goal_block(inode);
}
/*
* Allocation for a meta data block
*/
static ext4_fsblk_t
ext4_ext_new_meta_block(handle_t *handle, struct inode *inode,
struct ext4_ext_path *path,
struct ext4_extent *ex, int *err, unsigned int flags)
{
ext4_fsblk_t goal, newblock;
goal = ext4_ext_find_goal(inode, path, le32_to_cpu(ex->ee_block));
newblock = ext4_new_meta_blocks(handle, inode, goal, flags,
NULL, err);
return newblock;
}
static inline int ext4_ext_space_block(struct inode *inode, int check)
{
int size;
size = (inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header))
/ sizeof(struct ext4_extent);
#ifdef AGGRESSIVE_TEST
if (!check && size > 6)
size = 6;
#endif
return size;
}
static inline int ext4_ext_space_block_idx(struct inode *inode, int check)
{
int size;
size = (inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header))
/ sizeof(struct ext4_extent_idx);
#ifdef AGGRESSIVE_TEST
if (!check && size > 5)
size = 5;
#endif
return size;
}
static inline int ext4_ext_space_root(struct inode *inode, int check)
{
int size;
size = sizeof(EXT4_I(inode)->i_data);
size -= sizeof(struct ext4_extent_header);
size /= sizeof(struct ext4_extent);
#ifdef AGGRESSIVE_TEST
if (!check && size > 3)
size = 3;
#endif
return size;
}
static inline int ext4_ext_space_root_idx(struct inode *inode, int check)
{
int size;
size = sizeof(EXT4_I(inode)->i_data);
size -= sizeof(struct ext4_extent_header);
size /= sizeof(struct ext4_extent_idx);
#ifdef AGGRESSIVE_TEST
if (!check && size > 4)
size = 4;
#endif
return size;
}
static inline int
ext4_force_split_extent_at(handle_t *handle, struct inode *inode,
struct ext4_ext_path **ppath, ext4_lblk_t lblk,
int nofail)
{
struct ext4_ext_path *path = *ppath;
int unwritten = ext4_ext_is_unwritten(path[path->p_depth].p_ext);
return ext4_split_extent_at(handle, inode, ppath, lblk, unwritten ?
EXT4_EXT_MARK_UNWRIT1|EXT4_EXT_MARK_UNWRIT2 : 0,
EXT4_EX_NOCACHE | EXT4_GET_BLOCKS_PRE_IO |
(nofail ? EXT4_GET_BLOCKS_METADATA_NOFAIL:0));
}
static int
ext4_ext_max_entries(struct inode *inode, int depth)
{
int max;
if (depth == ext_depth(inode)) {
if (depth == 0)
max = ext4_ext_space_root(inode, 1);
else
max = ext4_ext_space_root_idx(inode, 1);
} else {
if (depth == 0)
max = ext4_ext_space_block(inode, 1);
else
max = ext4_ext_space_block_idx(inode, 1);
}
return max;
}
static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext)
{
ext4_fsblk_t block = ext4_ext_pblock(ext);
int len = ext4_ext_get_actual_len(ext);
ext4_lblk_t lblock = le32_to_cpu(ext->ee_block);
/*
* We allow neither:
* - zero length
* - overflow/wrap-around
*/
if (lblock + len <= lblock)
return 0;
return ext4_data_block_valid(EXT4_SB(inode->i_sb), block, len);
}
static int ext4_valid_extent_idx(struct inode *inode,
struct ext4_extent_idx *ext_idx)
{
ext4_fsblk_t block = ext4_idx_pblock(ext_idx);
return ext4_data_block_valid(EXT4_SB(inode->i_sb), block, 1);
}
static int ext4_valid_extent_entries(struct inode *inode,
struct ext4_extent_header *eh,
ext4_fsblk_t *pblk, int depth)
{
unsigned short entries;
if (eh->eh_entries == 0)
return 1;
entries = le16_to_cpu(eh->eh_entries);
if (depth == 0) {
/* leaf entries */
struct ext4_extent *ext = EXT_FIRST_EXTENT(eh);
ext4_lblk_t lblock = 0;
ext4_lblk_t prev = 0;
int len = 0;
while (entries) {
if (!ext4_valid_extent(inode, ext))
return 0;
/* Check for overlapping extents */
lblock = le32_to_cpu(ext->ee_block);
len = ext4_ext_get_actual_len(ext);
if ((lblock <= prev) && prev) {
*pblk = ext4_ext_pblock(ext);
return 0;
}
ext++;
entries--;
prev = lblock + len - 1;
}
} else {
struct ext4_extent_idx *ext_idx = EXT_FIRST_INDEX(eh);
while (entries) {
if (!ext4_valid_extent_idx(inode, ext_idx))
return 0;
ext_idx++;
entries--;
}
}
return 1;
}
static int __ext4_ext_check(const char *function, unsigned int line,
struct inode *inode, struct ext4_extent_header *eh,
int depth, ext4_fsblk_t pblk)
{
const char *error_msg;
int max = 0, err = -EFSCORRUPTED;
if (unlikely(eh->eh_magic != EXT4_EXT_MAGIC)) {
error_msg = "invalid magic";
goto corrupted;
}
if (unlikely(le16_to_cpu(eh->eh_depth) != depth)) {
error_msg = "unexpected eh_depth";
goto corrupted;
}
if (unlikely(eh->eh_max == 0)) {
error_msg = "invalid eh_max";
goto corrupted;
}
max = ext4_ext_max_entries(inode, depth);
if (unlikely(le16_to_cpu(eh->eh_max) > max)) {
error_msg = "too large eh_max";
goto corrupted;
}
if (unlikely(le16_to_cpu(eh->eh_entries) > le16_to_cpu(eh->eh_max))) {
error_msg = "invalid eh_entries";
goto corrupted;
}
if (!ext4_valid_extent_entries(inode, eh, &pblk, depth)) {
error_msg = "invalid extent entries";
goto corrupted;
}
ext4: verify extent header depth Although the extent tree depth of 5 should enough be for the worst case of 2*32 extents of length 1, the extent tree code does not currently to merge nodes which are less than half-full with a sibling node, or to shrink the tree depth if possible. So it's possible, at least in theory, for the tree depth to be greater than 5. However, even in the worst case, a tree depth of 32 is highly unlikely, and if the file system is maliciously corrupted, an insanely large eh_depth can cause memory allocation failures that will trigger kernel warnings (here, eh_depth = 65280): JBD2: ext4.exe wants too many credits credits:195849 rsv_credits:0 max:256 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 50 at fs/jbd2/transaction.c:293 start_this_handle+0x569/0x580 CPU: 0 PID: 50 Comm: ext4.exe Not tainted 4.7.0-rc5+ #508 Stack: 604a8947 625badd8 0002fd09 00000000 60078643 00000000 62623910 601bf9bc 62623970 6002fc84 626239b0 900000125 Call Trace: [<6001c2dc>] show_stack+0xdc/0x1a0 [<601bf9bc>] dump_stack+0x2a/0x2e [<6002fc84>] __warn+0x114/0x140 [<6002fdff>] warn_slowpath_null+0x1f/0x30 [<60165829>] start_this_handle+0x569/0x580 [<60165d4e>] jbd2__journal_start+0x11e/0x220 [<60146690>] __ext4_journal_start_sb+0x60/0xa0 [<60120a81>] ext4_truncate+0x131/0x3a0 [<60123677>] ext4_setattr+0x757/0x840 [<600d5d0f>] notify_change+0x16f/0x2a0 [<600b2b16>] do_truncate+0x76/0xc0 [<600c3e56>] path_openat+0x806/0x1300 [<600c55c9>] do_filp_open+0x89/0xf0 [<600b4074>] do_sys_open+0x134/0x1e0 [<600b4140>] SyS_open+0x20/0x30 [<6001ea68>] handle_syscall+0x88/0x90 [<600295fd>] userspace+0x3fd/0x500 [<6001ac55>] fork_handler+0x85/0x90 ---[ end trace 08b0b88b6387a244 ]--- [ Commit message modified and the extent tree depath check changed from 5 to 32 -- tytso ] Cc: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-07-15 04:22:07 +00:00
if (unlikely(depth > 32)) {
error_msg = "too large eh_depth";
goto corrupted;
}
/* Verify checksum on non-root extent tree nodes */
if (ext_depth(inode) != depth &&
!ext4_extent_block_csum_verify(inode, eh)) {
error_msg = "extent tree corrupted";
err = -EFSBADCRC;
goto corrupted;
}
return 0;
corrupted:
ext4_error_inode_err(inode, function, line, 0, -err,
"pblk %llu bad header/extent: %s - magic %x, "
"entries %u, max %u(%u), depth %u(%u)",
(unsigned long long) pblk, error_msg,
le16_to_cpu(eh->eh_magic),
le16_to_cpu(eh->eh_entries),
le16_to_cpu(eh->eh_max),
max, le16_to_cpu(eh->eh_depth), depth);
return err;
}
#define ext4_ext_check(inode, eh, depth, pblk) \
__ext4_ext_check(__func__, __LINE__, (inode), (eh), (depth), (pblk))
int ext4_ext_check_inode(struct inode *inode)
{
return ext4_ext_check(inode, ext_inode_hdr(inode), ext_depth(inode), 0);
}
ext4: fix extent_status fragmentation for plain files Extents are cached in read_extent_tree_block(); as a result, extents are not cached for inodes with depth == 0 when we try to find the extent using ext4_find_extent(). The result of the lookup is cached in ext4_map_blocks() but is only a subset of the extent on disk. As a result, the contents of extents status cache can get very badly fragmented for certain workloads, such as a random 4k read workload. File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 8191: 40960.. 49151: 8192: last,eof $ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test $ perf script | grep ext4_es_insert_extent | head -n 10 fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W Fix this by caching the extents for inodes with depth == 0 in ext4_find_extent(). [ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this newly added function is not in extents_cache.c, and to avoid potential visual confusion with ext4_es_cache_extent(). -TYT ] Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com> Link: https://lore.kernel.org/r/20191106122502.19986-1-dmonakhov@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-06 12:25:02 +00:00
static void ext4_cache_extents(struct inode *inode,
struct ext4_extent_header *eh)
{
struct ext4_extent *ex = EXT_FIRST_EXTENT(eh);
ext4_lblk_t prev = 0;
int i;
for (i = le16_to_cpu(eh->eh_entries); i > 0; i--, ex++) {
unsigned int status = EXTENT_STATUS_WRITTEN;
ext4_lblk_t lblk = le32_to_cpu(ex->ee_block);
int len = ext4_ext_get_actual_len(ex);
if (prev && (prev != lblk))
ext4_es_cache_extent(inode, prev, lblk - prev, ~0,
EXTENT_STATUS_HOLE);
if (ext4_ext_is_unwritten(ex))
status = EXTENT_STATUS_UNWRITTEN;
ext4_es_cache_extent(inode, lblk, len,
ext4_ext_pblock(ex), status);
prev = lblk + len;
}
}
static struct buffer_head *
__read_extent_tree_block(const char *function, unsigned int line,
struct inode *inode, ext4_fsblk_t pblk, int depth,
int flags)
{
struct buffer_head *bh;
int err;
bh = sb_getblk_gfp(inode->i_sb, pblk, __GFP_MOVABLE | GFP_NOFS);
if (unlikely(!bh))
return ERR_PTR(-ENOMEM);
if (!bh_uptodate_or_lock(bh)) {
trace_ext4_ext_load_extent(inode, pblk, _RET_IP_);
err = bh_submit_read(bh);
if (err < 0)
goto errout;
}
if (buffer_verified(bh) && !(flags & EXT4_EX_FORCE_CACHE))
return bh;
if (!ext4_has_feature_journal(inode->i_sb) ||
(inode->i_ino !=
le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum))) {
err = __ext4_ext_check(function, line, inode,
ext_block_hdr(bh), depth, pblk);
if (err)
goto errout;
}
set_buffer_verified(bh);
/*
* If this is a leaf block, cache all of its entries
*/
if (!(flags & EXT4_EX_NOCACHE) && depth == 0) {
struct ext4_extent_header *eh = ext_block_hdr(bh);
ext4: fix extent_status fragmentation for plain files Extents are cached in read_extent_tree_block(); as a result, extents are not cached for inodes with depth == 0 when we try to find the extent using ext4_find_extent(). The result of the lookup is cached in ext4_map_blocks() but is only a subset of the extent on disk. As a result, the contents of extents status cache can get very badly fragmented for certain workloads, such as a random 4k read workload. File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 8191: 40960.. 49151: 8192: last,eof $ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test $ perf script | grep ext4_es_insert_extent | head -n 10 fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W Fix this by caching the extents for inodes with depth == 0 in ext4_find_extent(). [ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this newly added function is not in extents_cache.c, and to avoid potential visual confusion with ext4_es_cache_extent(). -TYT ] Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com> Link: https://lore.kernel.org/r/20191106122502.19986-1-dmonakhov@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-06 12:25:02 +00:00
ext4_cache_extents(inode, eh);
}
return bh;
errout:
put_bh(bh);
return ERR_PTR(err);
}
#define read_extent_tree_block(inode, pblk, depth, flags) \
__read_extent_tree_block(__func__, __LINE__, (inode), (pblk), \
(depth), (flags))
/*
* This function is called to cache a file's extent information in the
* extent status tree
*/
int ext4_ext_precache(struct inode *inode)
{
struct ext4_inode_info *ei = EXT4_I(inode);
struct ext4_ext_path *path = NULL;
struct buffer_head *bh;
int i = 0, depth, ret = 0;
if (!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
return 0; /* not an extent-mapped inode */
down_read(&ei->i_data_sem);
depth = ext_depth(inode);
/* Don't cache anything if there are no external extent blocks */
if (!depth) {
up_read(&ei->i_data_sem);
return ret;
}
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:03:40 +00:00
path = kcalloc(depth + 1, sizeof(struct ext4_ext_path),
GFP_NOFS);
if (path == NULL) {
up_read(&ei->i_data_sem);
return -ENOMEM;
}
path[0].p_hdr = ext_inode_hdr(inode);
ret = ext4_ext_check(inode, path[0].p_hdr, depth, 0);
if (ret)
goto out;
path[0].p_idx = EXT_FIRST_INDEX(path[0].p_hdr);
while (i >= 0) {
/*
* If this is a leaf block or we've reached the end of
* the index block, go up
*/
if ((i == depth) ||
path[i].p_idx > EXT_LAST_INDEX(path[i].p_hdr)) {
brelse(path[i].p_bh);
path[i].p_bh = NULL;
i--;
continue;
}
bh = read_extent_tree_block(inode,
ext4_idx_pblock(path[i].p_idx++),
depth - i - 1,
EXT4_EX_FORCE_CACHE);
if (IS_ERR(bh)) {
ret = PTR_ERR(bh);
break;
}
i++;
path[i].p_bh = bh;
path[i].p_hdr = ext_block_hdr(bh);
path[i].p_idx = EXT_FIRST_INDEX(path[i].p_hdr);
}
ext4_set_inode_state(inode, EXT4_STATE_EXT_PRECACHED);
out:
up_read(&ei->i_data_sem);
ext4_ext_drop_refs(path);
kfree(path);
return ret;
}
#ifdef EXT_DEBUG
static void ext4_ext_show_path(struct inode *inode, struct ext4_ext_path *path)
{
int k, l = path->p_depth;
ext_debug("path:");
for (k = 0; k <= l; k++, path++) {
if (path->p_idx) {
ext_debug(" %d->%llu",
le32_to_cpu(path->p_idx->ei_block),
ext4_idx_pblock(path->p_idx));
} else if (path->p_ext) {
ext_debug(" %d:[%d]%d:%llu ",
le32_to_cpu(path->p_ext->ee_block),
ext4_ext_is_unwritten(path->p_ext),
ext4_ext_get_actual_len(path->p_ext),
ext4_ext_pblock(path->p_ext));
} else
ext_debug(" []");
}
ext_debug("\n");
}
static void ext4_ext_show_leaf(struct inode *inode, struct ext4_ext_path *path)
{
int depth = ext_depth(inode);
struct ext4_extent_header *eh;
struct ext4_extent *ex;
int i;
if (!path)
return;
eh = path[depth].p_hdr;
ex = EXT_FIRST_EXTENT(eh);
ext_debug("Displaying leaf extents for inode %lu\n", inode->i_ino);
for (i = 0; i < le16_to_cpu(eh->eh_entries); i++, ex++) {
ext_debug("%d:[%d]%d:%llu ", le32_to_cpu(ex->ee_block),
ext4_ext_is_unwritten(ex),
ext4_ext_get_actual_len(ex), ext4_ext_pblock(ex));
}
ext_debug("\n");
}
static void ext4_ext_show_move(struct inode *inode, struct ext4_ext_path *path,
ext4_fsblk_t newblock, int level)
{
int depth = ext_depth(inode);
struct ext4_extent *ex;
if (depth != level) {
struct ext4_extent_idx *idx;
idx = path[level].p_idx;
while (idx <= EXT_MAX_INDEX(path[level].p_hdr)) {
ext_debug("%d: move %d:%llu in new index %llu\n", level,
le32_to_cpu(idx->ei_block),
ext4_idx_pblock(idx),
newblock);
idx++;
}
return;
}
ex = path[depth].p_ext;
while (ex <= EXT_MAX_EXTENT(path[depth].p_hdr)) {
ext_debug("move %d:%llu:[%d]%d in new leaf %llu\n",
le32_to_cpu(ex->ee_block),
ext4_ext_pblock(ex),
ext4_ext_is_unwritten(ex),
ext4_ext_get_actual_len(ex),
newblock);
ex++;
}
}
#else
#define ext4_ext_show_path(inode, path)
#define ext4_ext_show_leaf(inode, path)
#define ext4_ext_show_move(inode, path, newblock, level)
#endif
void ext4_ext_drop_refs(struct ext4_ext_path *path)
{
int depth, i;
if (!path)
return;
depth = path->p_depth;
for (i = 0; i <= depth; i++, path++) {
if (path->p_bh) {
brelse(path->p_bh);
path->p_bh = NULL;
}
}
}
/*
* ext4_ext_binsearch_idx:
* binary search for the closest index of the given block
* the header must be checked before calling this
*/
static void
ext4_ext_binsearch_idx(struct inode *inode,
struct ext4_ext_path *path, ext4_lblk_t block)
{
struct ext4_extent_header *eh = path->p_hdr;
struct ext4_extent_idx *r, *l, *m;
ext_debug("binsearch for %u(idx): ", block);
l = EXT_FIRST_INDEX(eh) + 1;
r = EXT_LAST_INDEX(eh);
while (l <= r) {
m = l + (r - l) / 2;
if (block < le32_to_cpu(m->ei_block))
r = m - 1;
else
l = m + 1;
ext_debug("%p(%u):%p(%u):%p(%u) ", l, le32_to_cpu(l->ei_block),
m, le32_to_cpu(m->ei_block),
r, le32_to_cpu(r->ei_block));
}
path->p_idx = l - 1;
ext_debug(" -> %u->%lld ", le32_to_cpu(path->p_idx->ei_block),
ext4_idx_pblock(path->p_idx));
#ifdef CHECK_BINSEARCH
{
struct ext4_extent_idx *chix, *ix;
int k;
chix = ix = EXT_FIRST_INDEX(eh);
for (k = 0; k < le16_to_cpu(eh->eh_entries); k++, ix++) {
if (k != 0 && le32_to_cpu(ix->ei_block) <=
le32_to_cpu(ix[-1].ei_block)) {
printk(KERN_DEBUG "k=%d, ix=0x%p, "
"first=0x%p\n", k,
ix, EXT_FIRST_INDEX(eh));
printk(KERN_DEBUG "%u <= %u\n",
le32_to_cpu(ix->ei_block),
le32_to_cpu(ix[-1].ei_block));
}
BUG_ON(k && le32_to_cpu(ix->ei_block)
<= le32_to_cpu(ix[-1].ei_block));
if (block < le32_to_cpu(ix->ei_block))
break;
chix = ix;
}
BUG_ON(chix != path->p_idx);
}
#endif
}
/*
* ext4_ext_binsearch:
* binary search for closest extent of the given block
* the header must be checked before calling this
*/
static void
ext4_ext_binsearch(struct inode *inode,
struct ext4_ext_path *path, ext4_lblk_t block)
{
struct ext4_extent_header *eh = path->p_hdr;
struct ext4_extent *r, *l, *m;
if (eh->eh_entries == 0) {
/*
* this leaf is empty:
* we get such a leaf in split/add case
*/
return;
}
ext_debug("binsearch for %u: ", block);
l = EXT_FIRST_EXTENT(eh) + 1;
r = EXT_LAST_EXTENT(eh);
while (l <= r) {
m = l + (r - l) / 2;
if (block < le32_to_cpu(m->ee_block))
r = m - 1;
else
l = m + 1;
ext_debug("%p(%u):%p(%u):%p(%u) ", l, le32_to_cpu(l->ee_block),
m, le32_to_cpu(m->ee_block),
r, le32_to_cpu(r->ee_block));
}
path->p_ext = l - 1;
ext_debug(" -> %d:%llu:[%d]%d ",
le32_to_cpu(path->p_ext->ee_block),
ext4_ext_pblock(path->p_ext),
ext4_ext_is_unwritten(path->p_ext),
ext4_ext_get_actual_len(path->p_ext));
#ifdef CHECK_BINSEARCH
{
struct ext4_extent *chex, *ex;
int k;
chex = ex = EXT_FIRST_EXTENT(eh);
for (k = 0; k < le16_to_cpu(eh->eh_entries); k++, ex++) {
BUG_ON(k && le32_to_cpu(ex->ee_block)
<= le32_to_cpu(ex[-1].ee_block));
if (block < le32_to_cpu(ex->ee_block))
break;
chex = ex;
}
BUG_ON(chex != path->p_ext);
}
#endif
}
int ext4_ext_tree_init(handle_t *handle, struct inode *inode)
{
struct ext4_extent_header *eh;
eh = ext_inode_hdr(inode);
eh->eh_depth = 0;
eh->eh_entries = 0;
eh->eh_magic = EXT4_EXT_MAGIC;
eh->eh_max = cpu_to_le16(ext4_ext_space_root(inode, 0));
ext4_mark_inode_dirty(handle, inode);
return 0;
}
struct ext4_ext_path *
ext4_find_extent(struct inode *inode, ext4_lblk_t block,
struct ext4_ext_path **orig_path, int flags)
{
struct ext4_extent_header *eh;
struct buffer_head *bh;
struct ext4_ext_path *path = orig_path ? *orig_path : NULL;
short int depth, i, ppos = 0;
int ret;
eh = ext_inode_hdr(inode);
depth = ext_depth(inode);
if (depth < 0 || depth > EXT4_MAX_EXTENT_DEPTH) {
EXT4_ERROR_INODE(inode, "inode has invalid extent depth: %d",
depth);
ret = -EFSCORRUPTED;
goto err;
}
if (path) {
ext4_ext_drop_refs(path);
if (depth > path[0].p_maxdepth) {
kfree(path);
*orig_path = path = NULL;
}
}
if (!path) {
/* account possible depth increase */
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:03:40 +00:00
path = kcalloc(depth + 2, sizeof(struct ext4_ext_path),
GFP_NOFS);
if (unlikely(!path))
return ERR_PTR(-ENOMEM);
path[0].p_maxdepth = depth + 1;
}
path[0].p_hdr = eh;
path[0].p_bh = NULL;
i = depth;
ext4: fix extent_status fragmentation for plain files Extents are cached in read_extent_tree_block(); as a result, extents are not cached for inodes with depth == 0 when we try to find the extent using ext4_find_extent(). The result of the lookup is cached in ext4_map_blocks() but is only a subset of the extent on disk. As a result, the contents of extents status cache can get very badly fragmented for certain workloads, such as a random 4k read workload. File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 8191: 40960.. 49151: 8192: last,eof $ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test $ perf script | grep ext4_es_insert_extent | head -n 10 fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W Fix this by caching the extents for inodes with depth == 0 in ext4_find_extent(). [ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this newly added function is not in extents_cache.c, and to avoid potential visual confusion with ext4_es_cache_extent(). -TYT ] Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com> Link: https://lore.kernel.org/r/20191106122502.19986-1-dmonakhov@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-06 12:25:02 +00:00
if (!(flags & EXT4_EX_NOCACHE) && depth == 0)
ext4_cache_extents(inode, eh);
/* walk through the tree */
while (i) {
ext_debug("depth %d: num %d, max %d\n",
ppos, le16_to_cpu(eh->eh_entries), le16_to_cpu(eh->eh_max));
ext4_ext_binsearch_idx(inode, path + ppos, block);
path[ppos].p_block = ext4_idx_pblock(path[ppos].p_idx);
path[ppos].p_depth = i;
path[ppos].p_ext = NULL;
bh = read_extent_tree_block(inode, path[ppos].p_block, --i,
flags);
if (IS_ERR(bh)) {
ret = PTR_ERR(bh);
goto err;
}
eh = ext_block_hdr(bh);
ppos++;
path[ppos].p_bh = bh;
path[ppos].p_hdr = eh;
}
path[ppos].p_depth = i;
path[ppos].p_ext = NULL;
path[ppos].p_idx = NULL;
/* find extent */
ext4_ext_binsearch(inode, path + ppos, block);
/* if not an empty leaf */
if (path[ppos].p_ext)
path[ppos].p_block = ext4_ext_pblock(path[ppos].p_ext);
ext4_ext_show_path(inode, path);
return path;
err:
ext4_ext_drop_refs(path);
kfree(path);
if (orig_path)
*orig_path = NULL;
return ERR_PTR(ret);
}
/*
* ext4_ext_insert_index:
* insert new index [@logical;@ptr] into the block at @curp;
* check where to insert: before @curp or after @curp
*/
static int ext4_ext_insert_index(handle_t *handle, struct inode *inode,
struct ext4_ext_path *curp,
int logical, ext4_fsblk_t ptr)
{
struct ext4_extent_idx *ix;
int len, err;
err = ext4_ext_get_access(handle, inode, curp);
if (err)
return err;
if (unlikely(logical == le32_to_cpu(curp->p_idx->ei_block))) {
EXT4_ERROR_INODE(inode,
"logical %d == ei_block %d!",
logical, le32_to_cpu(curp->p_idx->ei_block));
return -EFSCORRUPTED;
}
if (unlikely(le16_to_cpu(curp->p_hdr->eh_entries)
>= le16_to_cpu(curp->p_hdr->eh_max))) {
EXT4_ERROR_INODE(inode,
"eh_entries %d >= eh_max %d!",
le16_to_cpu(curp->p_hdr->eh_entries),
le16_to_cpu(curp->p_hdr->eh_max));
return -EFSCORRUPTED;
}
if (logical > le32_to_cpu(curp->p_idx->ei_block)) {
/* insert after */
ext_debug("insert new index %d after: %llu\n", logical, ptr);
ix = curp->p_idx + 1;
} else {
/* insert before */
ext_debug("insert new index %d before: %llu\n", logical, ptr);
ix = curp->p_idx;
}
len = EXT_LAST_INDEX(curp->p_hdr) - ix + 1;
BUG_ON(len < 0);
if (len > 0) {
ext_debug("insert new index %d: "
"move %d indices from 0x%p to 0x%p\n",
logical, len, ix, ix + 1);
memmove(ix + 1, ix, len * sizeof(struct ext4_extent_idx));
}
if (unlikely(ix > EXT_MAX_INDEX(curp->p_hdr))) {
EXT4_ERROR_INODE(inode, "ix > EXT_MAX_INDEX!");
return -EFSCORRUPTED;
}
ix->ei_block = cpu_to_le32(logical);
ext4_idx_store_pblock(ix, ptr);
le16_add_cpu(&curp->p_hdr->eh_entries, 1);
if (unlikely(ix > EXT_LAST_INDEX(curp->p_hdr))) {
EXT4_ERROR_INODE(inode, "ix > EXT_LAST_INDEX!");
return -EFSCORRUPTED;
}
err = ext4_ext_dirty(handle, inode, curp);
ext4_std_error(inode->i_sb, err);
return err;
}
/*
* ext4_ext_split:
* inserts new subtree into the path, using free index entry
* at depth @at:
* - allocates all needed blocks (new leaf and all intermediate index blocks)
* - makes decision where to split
* - moves remaining extents and index entries (right to the split point)
* into the newly allocated blocks
* - initializes subtree
*/
static int ext4_ext_split(handle_t *handle, struct inode *inode,
unsigned int flags,
struct ext4_ext_path *path,
struct ext4_extent *newext, int at)
{
struct buffer_head *bh = NULL;
int depth = ext_depth(inode);
struct ext4_extent_header *neh;
struct ext4_extent_idx *fidx;
int i = at, k, m, a;
ext4_fsblk_t newblock, oldblock;
__le32 border;
ext4_fsblk_t *ablocks = NULL; /* array of allocated blocks */
int err = 0;
size_t ext_size = 0;
/* make decision: where to split? */
/* FIXME: now decision is simplest: at current extent */
/* if current leaf will be split, then we should use
* border from split point */
if (unlikely(path[depth].p_ext > EXT_MAX_EXTENT(path[depth].p_hdr))) {
EXT4_ERROR_INODE(inode, "p_ext > EXT_MAX_EXTENT!");
return -EFSCORRUPTED;
}
if (path[depth].p_ext != EXT_MAX_EXTENT(path[depth].p_hdr)) {
border = path[depth].p_ext[1].ee_block;
ext_debug("leaf will be split."
" next leaf starts at %d\n",
le32_to_cpu(border));
} else {
border = newext->ee_block;
ext_debug("leaf will be added."
" next leaf starts at %d\n",
le32_to_cpu(border));
}
/*
* If error occurs, then we break processing
* and mark filesystem read-only. index won't
* be inserted and tree will be in consistent
* state. Next mount will repair buffers too.
*/
/*
* Get array to track all allocated blocks.
* We need this to handle errors and free blocks
* upon them.
*/
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:03:40 +00:00
ablocks = kcalloc(depth, sizeof(ext4_fsblk_t), GFP_NOFS);
if (!ablocks)
return -ENOMEM;
/* allocate all needed blocks */
ext_debug("allocate %d blocks for indexes/leaf\n", depth - at);
for (a = 0; a < depth - at; a++) {
newblock = ext4_ext_new_meta_block(handle, inode, path,
newext, &err, flags);
if (newblock == 0)
goto cleanup;
ablocks[a] = newblock;
}
/* initialize new leaf */
newblock = ablocks[--a];
if (unlikely(newblock == 0)) {
EXT4_ERROR_INODE(inode, "newblock == 0!");
err = -EFSCORRUPTED;
goto cleanup;
}
bh = sb_getblk_gfp(inode->i_sb, newblock, __GFP_MOVABLE | GFP_NOFS);
if (unlikely(!bh)) {
err = -ENOMEM;
goto cleanup;
}
lock_buffer(bh);
err = ext4_journal_get_create_access(handle, bh);
if (err)
goto cleanup;
neh = ext_block_hdr(bh);
neh->eh_entries = 0;
neh->eh_max = cpu_to_le16(ext4_ext_space_block(inode, 0));
neh->eh_magic = EXT4_EXT_MAGIC;
neh->eh_depth = 0;
/* move remainder of path[depth] to the new leaf */
if (unlikely(path[depth].p_hdr->eh_entries !=
path[depth].p_hdr->eh_max)) {
EXT4_ERROR_INODE(inode, "eh_entries %d != eh_max %d!",
path[depth].p_hdr->eh_entries,
path[depth].p_hdr->eh_max);
err = -EFSCORRUPTED;
goto cleanup;
}
/* start copy from next extent */
m = EXT_MAX_EXTENT(path[depth].p_hdr) - path[depth].p_ext++;
ext4_ext_show_move(inode, path, newblock, depth);
if (m) {
struct ext4_extent *ex;
ex = EXT_FIRST_EXTENT(neh);
memmove(ex, path[depth].p_ext, sizeof(struct ext4_extent) * m);
le16_add_cpu(&neh->eh_entries, m);
}
/* zero out unused area in the extent block */
ext_size = sizeof(struct ext4_extent_header) +
sizeof(struct ext4_extent) * le16_to_cpu(neh->eh_entries);
memset(bh->b_data + ext_size, 0, inode->i_sb->s_blocksize - ext_size);
ext4_extent_block_csum_set(inode, neh);
set_buffer_uptodate(bh);
unlock_buffer(bh);
err = ext4_handle_dirty_metadata(handle, inode, bh);
if (err)
goto cleanup;
brelse(bh);
bh = NULL;
/* correct old leaf */
if (m) {
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto cleanup;
le16_add_cpu(&path[depth].p_hdr->eh_entries, -m);
err = ext4_ext_dirty(handle, inode, path + depth);
if (err)
goto cleanup;
}
/* create intermediate indexes */
k = depth - at - 1;
if (unlikely(k < 0)) {
EXT4_ERROR_INODE(inode, "k %d < 0!", k);
err = -EFSCORRUPTED;
goto cleanup;
}
if (k)
ext_debug("create %d intermediate indices\n", k);
/* insert new index into current index block */
/* current depth stored in i var */
i = depth - 1;
while (k--) {
oldblock = newblock;
newblock = ablocks[--a];
bh = sb_getblk(inode->i_sb, newblock);
if (unlikely(!bh)) {
err = -ENOMEM;
goto cleanup;
}
lock_buffer(bh);
err = ext4_journal_get_create_access(handle, bh);
if (err)
goto cleanup;
neh = ext_block_hdr(bh);
neh->eh_entries = cpu_to_le16(1);
neh->eh_magic = EXT4_EXT_MAGIC;
neh->eh_max = cpu_to_le16(ext4_ext_space_block_idx(inode, 0));
neh->eh_depth = cpu_to_le16(depth - i);
fidx = EXT_FIRST_INDEX(neh);
fidx->ei_block = border;
ext4_idx_store_pblock(fidx, oldblock);
ext_debug("int.index at %d (block %llu): %u -> %llu\n",
i, newblock, le32_to_cpu(border), oldblock);
/* move remainder of path[i] to the new index block */
if (unlikely(EXT_MAX_INDEX(path[i].p_hdr) !=
EXT_LAST_INDEX(path[i].p_hdr))) {
EXT4_ERROR_INODE(inode,
"EXT_MAX_INDEX != EXT_LAST_INDEX ee_block %d!",
le32_to_cpu(path[i].p_ext->ee_block));
err = -EFSCORRUPTED;
goto cleanup;
}
/* start copy indexes */
m = EXT_MAX_INDEX(path[i].p_hdr) - path[i].p_idx++;
ext_debug("cur 0x%p, last 0x%p\n", path[i].p_idx,
EXT_MAX_INDEX(path[i].p_hdr));
ext4_ext_show_move(inode, path, newblock, i);
if (m) {
memmove(++fidx, path[i].p_idx,
sizeof(struct ext4_extent_idx) * m);
le16_add_cpu(&neh->eh_entries, m);
}
/* zero out unused area in the extent block */
ext_size = sizeof(struct ext4_extent_header) +
(sizeof(struct ext4_extent) * le16_to_cpu(neh->eh_entries));
memset(bh->b_data + ext_size, 0,
inode->i_sb->s_blocksize - ext_size);
ext4_extent_block_csum_set(inode, neh);
set_buffer_uptodate(bh);
unlock_buffer(bh);
err = ext4_handle_dirty_metadata(handle, inode, bh);
if (err)
goto cleanup;
brelse(bh);
bh = NULL;
/* correct old index */
if (m) {
err = ext4_ext_get_access(handle, inode, path + i);
if (err)
goto cleanup;
le16_add_cpu(&path[i].p_hdr->eh_entries, -m);
err = ext4_ext_dirty(handle, inode, path + i);
if (err)
goto cleanup;
}
i--;
}
/* insert new index */
err = ext4_ext_insert_index(handle, inode, path + at,
le32_to_cpu(border), newblock);
cleanup:
if (bh) {
if (buffer_locked(bh))
unlock_buffer(bh);
brelse(bh);
}
if (err) {
/* free all allocated blocks in error case */
for (i = 0; i < depth; i++) {
if (!ablocks[i])
continue;
ext4_free_blocks(handle, inode, NULL, ablocks[i], 1,
EXT4_FREE_BLOCKS_METADATA);
}
}
kfree(ablocks);
return err;
}
/*
* ext4_ext_grow_indepth:
* implements tree growing procedure:
* - allocates new block
* - moves top-level data (index block or leaf) into the new block
* - initializes new top-level, creating index that points to the
* just created block
*/
static int ext4_ext_grow_indepth(handle_t *handle, struct inode *inode,
unsigned int flags)
{
struct ext4_extent_header *neh;
struct buffer_head *bh;
ext4_fsblk_t newblock, goal = 0;
struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
int err = 0;
size_t ext_size = 0;
/* Try to prepend new index to old one */
if (ext_depth(inode))
goal = ext4_idx_pblock(EXT_FIRST_INDEX(ext_inode_hdr(inode)));
if (goal > le32_to_cpu(es->s_first_data_block)) {
flags |= EXT4_MB_HINT_TRY_GOAL;
goal--;
} else
goal = ext4_inode_to_goal_block(inode);
newblock = ext4_new_meta_blocks(handle, inode, goal, flags,
NULL, &err);
if (newblock == 0)
return err;
bh = sb_getblk_gfp(inode->i_sb, newblock, __GFP_MOVABLE | GFP_NOFS);
if (unlikely(!bh))
return -ENOMEM;
lock_buffer(bh);
err = ext4_journal_get_create_access(handle, bh);
if (err) {
unlock_buffer(bh);
goto out;
}
ext_size = sizeof(EXT4_I(inode)->i_data);
/* move top-level index/leaf into new block */
memmove(bh->b_data, EXT4_I(inode)->i_data, ext_size);
/* zero out unused area in the extent block */
memset(bh->b_data + ext_size, 0, inode->i_sb->s_blocksize - ext_size);
/* set size of new block */
neh = ext_block_hdr(bh);
/* old root could have indexes or leaves
* so calculate e_max right way */
if (ext_depth(inode))
neh->eh_max = cpu_to_le16(ext4_ext_space_block_idx(inode, 0));
else
neh->eh_max = cpu_to_le16(ext4_ext_space_block(inode, 0));
neh->eh_magic = EXT4_EXT_MAGIC;
ext4_extent_block_csum_set(inode, neh);
set_buffer_uptodate(bh);
unlock_buffer(bh);
err = ext4_handle_dirty_metadata(handle, inode, bh);
if (err)
goto out;
/* Update top-level index: num,max,pointer */
neh = ext_inode_hdr(inode);
neh->eh_entries = cpu_to_le16(1);
ext4_idx_store_pblock(EXT_FIRST_INDEX(neh), newblock);
if (neh->eh_depth == 0) {
/* Root extent block becomes index block */
neh->eh_max = cpu_to_le16(ext4_ext_space_root_idx(inode, 0));
EXT_FIRST_INDEX(neh)->ei_block =
EXT_FIRST_EXTENT(neh)->ee_block;
}
ext_debug("new root: num %d(%d), lblock %d, ptr %llu\n",
le16_to_cpu(neh->eh_entries), le16_to_cpu(neh->eh_max),
le32_to_cpu(EXT_FIRST_INDEX(neh)->ei_block),
ext4_idx_pblock(EXT_FIRST_INDEX(neh)));
le16_add_cpu(&neh->eh_depth, 1);
ext4_mark_inode_dirty(handle, inode);
out:
brelse(bh);
return err;
}
/*
* ext4_ext_create_new_leaf:
* finds empty index and adds new leaf.
* if no free index is found, then it requests in-depth growing.
*/
static int ext4_ext_create_new_leaf(handle_t *handle, struct inode *inode,
unsigned int mb_flags,
unsigned int gb_flags,
struct ext4_ext_path **ppath,
struct ext4_extent *newext)
{
struct ext4_ext_path *path = *ppath;
struct ext4_ext_path *curp;
int depth, i, err = 0;
repeat:
i = depth = ext_depth(inode);
/* walk up to the tree and look for free index entry */
curp = path + depth;
while (i > 0 && !EXT_HAS_FREE_INDEX(curp)) {
i--;
curp--;
}
/* we use already allocated block for index block,
* so subsequent data blocks should be contiguous */
if (EXT_HAS_FREE_INDEX(curp)) {
/* if we found index with free entry, then use that
* entry: create all needed subtree and add new leaf */
err = ext4_ext_split(handle, inode, mb_flags, path, newext, i);
if (err)
goto out;
/* refill path */
path = ext4_find_extent(inode,
(ext4_lblk_t)le32_to_cpu(newext->ee_block),
ppath, gb_flags);
if (IS_ERR(path))
err = PTR_ERR(path);
} else {
/* tree is full, time to grow in depth */
err = ext4_ext_grow_indepth(handle, inode, mb_flags);
if (err)
goto out;
/* refill path */
path = ext4_find_extent(inode,
(ext4_lblk_t)le32_to_cpu(newext->ee_block),
ppath, gb_flags);
if (IS_ERR(path)) {
err = PTR_ERR(path);
goto out;
}
/*
* only first (depth 0 -> 1) produces free space;
* in all other cases we have to split the grown tree
*/
depth = ext_depth(inode);
if (path[depth].p_hdr->eh_entries == path[depth].p_hdr->eh_max) {
/* now we need to split */
goto repeat;
}
}
out:
return err;
}
/*
* search the closest allocated block to the left for *logical
* and returns it at @logical + it's physical address at @phys
* if *logical is the smallest allocated block, the function
* returns 0 at @phys
* return value contains 0 (success) or error code
*/
static int ext4_ext_search_left(struct inode *inode,
struct ext4_ext_path *path,
ext4_lblk_t *logical, ext4_fsblk_t *phys)
{
struct ext4_extent_idx *ix;
struct ext4_extent *ex;
int depth, ee_len;
if (unlikely(path == NULL)) {
EXT4_ERROR_INODE(inode, "path == NULL *logical %d!", *logical);
return -EFSCORRUPTED;
}
depth = path->p_depth;
*phys = 0;
if (depth == 0 && path->p_ext == NULL)
return 0;
/* usually extent in the path covers blocks smaller
* then *logical, but it can be that extent is the
* first one in the file */
ex = path[depth].p_ext;
ee_len = ext4_ext_get_actual_len(ex);
if (*logical < le32_to_cpu(ex->ee_block)) {
if (unlikely(EXT_FIRST_EXTENT(path[depth].p_hdr) != ex)) {
EXT4_ERROR_INODE(inode,
"EXT_FIRST_EXTENT != ex *logical %d ee_block %d!",
*logical, le32_to_cpu(ex->ee_block));
return -EFSCORRUPTED;
}
while (--depth >= 0) {
ix = path[depth].p_idx;
if (unlikely(ix != EXT_FIRST_INDEX(path[depth].p_hdr))) {
EXT4_ERROR_INODE(inode,
"ix (%d) != EXT_FIRST_INDEX (%d) (depth %d)!",
ix != NULL ? le32_to_cpu(ix->ei_block) : 0,
EXT_FIRST_INDEX(path[depth].p_hdr) != NULL ?
le32_to_cpu(EXT_FIRST_INDEX(path[depth].p_hdr)->ei_block) : 0,
depth);
return -EFSCORRUPTED;
}
}
return 0;
}
if (unlikely(*logical < (le32_to_cpu(ex->ee_block) + ee_len))) {
EXT4_ERROR_INODE(inode,
"logical %d < ee_block %d + ee_len %d!",
*logical, le32_to_cpu(ex->ee_block), ee_len);
return -EFSCORRUPTED;
}
*logical = le32_to_cpu(ex->ee_block) + ee_len - 1;
*phys = ext4_ext_pblock(ex) + ee_len - 1;
return 0;
}
/*
* search the closest allocated block to the right for *logical
* and returns it at @logical + it's physical address at @phys
* if *logical is the largest allocated block, the function
* returns 0 at @phys
* return value contains 0 (success) or error code
*/
static int ext4_ext_search_right(struct inode *inode,
struct ext4_ext_path *path,
ext4_lblk_t *logical, ext4_fsblk_t *phys,
struct ext4_extent **ret_ex)
{
struct buffer_head *bh = NULL;
struct ext4_extent_header *eh;
struct ext4_extent_idx *ix;
struct ext4_extent *ex;
ext4_fsblk_t block;
int depth; /* Note, NOT eh_depth; depth from top of tree */
int ee_len;
if (unlikely(path == NULL)) {
EXT4_ERROR_INODE(inode, "path == NULL *logical %d!", *logical);
return -EFSCORRUPTED;
}
depth = path->p_depth;
*phys = 0;
if (depth == 0 && path->p_ext == NULL)
return 0;
/* usually extent in the path covers blocks smaller
* then *logical, but it can be that extent is the
* first one in the file */
ex = path[depth].p_ext;
ee_len = ext4_ext_get_actual_len(ex);
if (*logical < le32_to_cpu(ex->ee_block)) {
if (unlikely(EXT_FIRST_EXTENT(path[depth].p_hdr) != ex)) {
EXT4_ERROR_INODE(inode,
"first_extent(path[%d].p_hdr) != ex",
depth);
return -EFSCORRUPTED;
}
while (--depth >= 0) {
ix = path[depth].p_idx;
if (unlikely(ix != EXT_FIRST_INDEX(path[depth].p_hdr))) {
EXT4_ERROR_INODE(inode,
"ix != EXT_FIRST_INDEX *logical %d!",
*logical);
return -EFSCORRUPTED;
}
}
goto found_extent;
}
if (unlikely(*logical < (le32_to_cpu(ex->ee_block) + ee_len))) {
EXT4_ERROR_INODE(inode,
"logical %d < ee_block %d + ee_len %d!",
*logical, le32_to_cpu(ex->ee_block), ee_len);
return -EFSCORRUPTED;
}
if (ex != EXT_LAST_EXTENT(path[depth].p_hdr)) {
/* next allocated block in this leaf */
ex++;
goto found_extent;
}
/* go up and search for index to the right */
while (--depth >= 0) {
ix = path[depth].p_idx;
if (ix != EXT_LAST_INDEX(path[depth].p_hdr))
goto got_index;
}
/* we've gone up to the root and found no index to the right */
return 0;
got_index:
/* we've found index to the right, let's
* follow it and find the closest allocated
* block to the right */
ix++;
block = ext4_idx_pblock(ix);
while (++depth < path->p_depth) {
/* subtract from p_depth to get proper eh_depth */
bh = read_extent_tree_block(inode, block,
path->p_depth - depth, 0);
if (IS_ERR(bh))
return PTR_ERR(bh);
eh = ext_block_hdr(bh);
ix = EXT_FIRST_INDEX(eh);
block = ext4_idx_pblock(ix);
put_bh(bh);
}
bh = read_extent_tree_block(inode, block, path->p_depth - depth, 0);
if (IS_ERR(bh))
return PTR_ERR(bh);
eh = ext_block_hdr(bh);
ex = EXT_FIRST_EXTENT(eh);
found_extent:
*logical = le32_to_cpu(ex->ee_block);
*phys = ext4_ext_pblock(ex);
*ret_ex = ex;
if (bh)
put_bh(bh);
return 0;
}
/*
* ext4_ext_next_allocated_block:
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
* returns allocated block in subsequent extent or EXT_MAX_BLOCKS.
* NOTE: it considers block number from index entry as
* allocated block. Thus, index entries have to be consistent
* with leaves.
*/
ext4_lblk_t
ext4_ext_next_allocated_block(struct ext4_ext_path *path)
{
int depth;
BUG_ON(path == NULL);
depth = path->p_depth;
if (depth == 0 && path->p_ext == NULL)
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
return EXT_MAX_BLOCKS;
while (depth >= 0) {
struct ext4_ext_path *p = &path[depth];
if (depth == path->p_depth) {
/* leaf */
if (p->p_ext && p->p_ext != EXT_LAST_EXTENT(p->p_hdr))
return le32_to_cpu(p->p_ext[1].ee_block);
} else {
/* index */
if (p->p_idx != EXT_LAST_INDEX(p->p_hdr))
return le32_to_cpu(p->p_idx[1].ei_block);
}
depth--;
}
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
return EXT_MAX_BLOCKS;
}
/*
* ext4_ext_next_leaf_block:
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
* returns first allocated block from next leaf or EXT_MAX_BLOCKS
*/
static ext4_lblk_t ext4_ext_next_leaf_block(struct ext4_ext_path *path)
{
int depth;
BUG_ON(path == NULL);
depth = path->p_depth;
/* zero-tree has no leaf blocks at all */
if (depth == 0)
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
return EXT_MAX_BLOCKS;
/* go to index block */
depth--;
while (depth >= 0) {
if (path[depth].p_idx !=
EXT_LAST_INDEX(path[depth].p_hdr))
return (ext4_lblk_t)
le32_to_cpu(path[depth].p_idx[1].ei_block);
depth--;
}
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
return EXT_MAX_BLOCKS;
}
/*
* ext4_ext_correct_indexes:
* if leaf gets modified and modified extent is first in the leaf,
* then we have to correct all indexes above.
* TODO: do we need to correct tree in all cases?
*/
static int ext4_ext_correct_indexes(handle_t *handle, struct inode *inode,
struct ext4_ext_path *path)
{
struct ext4_extent_header *eh;
int depth = ext_depth(inode);
struct ext4_extent *ex;
__le32 border;
int k, err = 0;
eh = path[depth].p_hdr;
ex = path[depth].p_ext;
if (unlikely(ex == NULL || eh == NULL)) {
EXT4_ERROR_INODE(inode,
"ex %p == NULL or eh %p == NULL", ex, eh);
return -EFSCORRUPTED;
}
if (depth == 0) {
/* there is no tree at all */
return 0;
}
if (ex != EXT_FIRST_EXTENT(eh)) {
/* we correct tree if first leaf got modified only */
return 0;
}
/*
* TODO: we need correction if border is smaller than current one
*/
k = depth - 1;
border = path[depth].p_ext->ee_block;
err = ext4_ext_get_access(handle, inode, path + k);
if (err)
return err;
path[k].p_idx->ei_block = border;
err = ext4_ext_dirty(handle, inode, path + k);
if (err)
return err;
while (k--) {
/* change all left-side indexes */
if (path[k+1].p_idx != EXT_FIRST_INDEX(path[k+1].p_hdr))
break;
err = ext4_ext_get_access(handle, inode, path + k);
if (err)
break;
path[k].p_idx->ei_block = border;
err = ext4_ext_dirty(handle, inode, path + k);
if (err)
break;
}
return err;
}
static int ext4_can_extents_be_merged(struct inode *inode,
struct ext4_extent *ex1,
struct ext4_extent *ex2)
{
unsigned short ext1_ee_len, ext2_ee_len;
if (ext4_ext_is_unwritten(ex1) != ext4_ext_is_unwritten(ex2))
return 0;
ext1_ee_len = ext4_ext_get_actual_len(ex1);
ext2_ee_len = ext4_ext_get_actual_len(ex2);
if (le32_to_cpu(ex1->ee_block) + ext1_ee_len !=
le32_to_cpu(ex2->ee_block))
return 0;
if (ext1_ee_len + ext2_ee_len > EXT_INIT_MAX_LEN)
return 0;
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 12:02:39 +00:00
if (ext4_ext_is_unwritten(ex1) &&
ext4: introduce direct I/O write using iomap infrastructure This patch introduces a new direct I/O write path which makes use of the iomap infrastructure. All direct I/O writes are now passed from the ->write_iter() callback through to the new direct I/O handler ext4_dio_write_iter(). This function is responsible for calling into the iomap infrastructure via iomap_dio_rw(). Code snippets from the existing direct I/O write code within ext4_file_write_iter() such as, checking whether the I/O request is unaligned asynchronous I/O, or whether the write will result in an overwrite have effectively been moved out and into the new direct I/O ->write_iter() handler. The block mapping flags that are eventually passed down to ext4_map_blocks() from the *_get_block_*() suite of routines have been taken out and introduced within ext4_iomap_alloc(). For inode extension cases, ext4_handle_inode_extension() is effectively the function responsible for performing such metadata updates. This is called after iomap_dio_rw() has returned so that we can safely determine whether we need to potentially truncate any allocated blocks that may have been prepared for this direct I/O write. We don't perform the inode extension, or truncate operations from the ->end_io() handler as we don't have the original I/O 'length' available there. The ->end_io() however is responsible fo converting allocated unwritten extents to written extents. In the instance of a short write, we fallback and complete the remainder of the I/O using buffered I/O via ext4_buffered_write_iter(). The existing buffer_head direct I/O implementation has been removed as it's now redundant. [ Fix up ext4_dio_write_iter() per Jan's comments at https://lore.kernel.org/r/20191105135932.GN22379@quack2.suse.cz -- TYT ] Signed-off-by: Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e55db6f12ae6ff017f36774135e79f3e7b0333da.1572949325.git.mbobrowski@mbobrowski.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05 12:02:39 +00:00
ext1_ee_len + ext2_ee_len > EXT_UNWRITTEN_MAX_LEN)
return 0;
#ifdef AGGRESSIVE_TEST
if (ext1_ee_len >= 4)
return 0;
#endif
if (ext4_ext_pblock(ex1) + ext1_ee_len == ext4_ext_pblock(ex2))
return 1;
return 0;
}
/*
* This function tries to merge the "ex" extent to the next extent in the tree.
* It always tries to merge towards right. If you want to merge towards
* left, pass "ex - 1" as argument instead of "ex".
* Returns 0 if the extents (ex and ex+1) were _not_ merged and returns
* 1 if they got merged.
*/
static int ext4_ext_try_to_merge_right(struct inode *inode,
struct ext4_ext_path *path,
struct ext4_extent *ex)
{
struct ext4_extent_header *eh;
unsigned int depth, len;
int merge_done = 0, unwritten;
depth = ext_depth(inode);
BUG_ON(path[depth].p_hdr == NULL);
eh = path[depth].p_hdr;
while (ex < EXT_LAST_EXTENT(eh)) {
if (!ext4_can_extents_be_merged(inode, ex, ex + 1))
break;
/* merge with next extent! */
unwritten = ext4_ext_is_unwritten(ex);
ex->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ex)
+ ext4_ext_get_actual_len(ex + 1));
if (unwritten)
ext4_ext_mark_unwritten(ex);
if (ex + 1 < EXT_LAST_EXTENT(eh)) {
len = (EXT_LAST_EXTENT(eh) - ex - 1)
* sizeof(struct ext4_extent);
memmove(ex + 1, ex + 2, len);
}
le16_add_cpu(&eh->eh_entries, -1);
merge_done = 1;
WARN_ON(eh->eh_entries == 0);
if (!eh->eh_entries)
EXT4_ERROR_INODE(inode, "eh->eh_entries = 0!");
}
return merge_done;
}
/*
* This function does a very simple check to see if we can collapse
* an extent tree with a single extent tree leaf block into the inode.
*/
static void ext4_ext_try_to_merge_up(handle_t *handle,
struct inode *inode,
struct ext4_ext_path *path)
{
size_t s;
unsigned max_root = ext4_ext_space_root(inode, 0);
ext4_fsblk_t blk;
if ((path[0].p_depth != 1) ||
(le16_to_cpu(path[0].p_hdr->eh_entries) != 1) ||
(le16_to_cpu(path[1].p_hdr->eh_entries) > max_root))
return;
/*
* We need to modify the block allocation bitmap and the block
* group descriptor to release the extent tree block. If we
* can't get the journal credits, give up.
*/
if (ext4_journal_extend(handle, 2,
ext4_free_metadata_revoke_credits(inode->i_sb, 1)))
return;
/*
* Copy the extent data up to the inode
*/
blk = ext4_idx_pblock(path[0].p_idx);
s = le16_to_cpu(path[1].p_hdr->eh_entries) *
sizeof(struct ext4_extent_idx);
s += sizeof(struct ext4_extent_header);
path[1].p_maxdepth = path[0].p_maxdepth;
memcpy(path[0].p_hdr, path[1].p_hdr, s);
path[0].p_depth = 0;
path[0].p_ext = EXT_FIRST_EXTENT(path[0].p_hdr) +
(path[1].p_ext - EXT_FIRST_EXTENT(path[1].p_hdr));
path[0].p_hdr->eh_max = cpu_to_le16(max_root);
brelse(path[1].p_bh);
ext4_free_blocks(handle, inode, NULL, blk, 1,
EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET);
}
/*
* This function tries to merge the @ex extent to neighbours in the tree, then
* tries to collapse the extent tree into the inode.
*/
static void ext4_ext_try_to_merge(handle_t *handle,
struct inode *inode,
struct ext4_ext_path *path,
struct ext4_extent *ex)
{
struct ext4_extent_header *eh;
unsigned int depth;
int merge_done = 0;
depth = ext_depth(inode);
BUG_ON(path[depth].p_hdr == NULL);
eh = path[depth].p_hdr;
if (ex > EXT_FIRST_EXTENT(eh))
merge_done = ext4_ext_try_to_merge_right(inode, path, ex - 1);
if (!merge_done)
(void) ext4_ext_try_to_merge_right(inode, path, ex);
ext4_ext_try_to_merge_up(handle, inode, path);
}
/*
* check if a portion of the "newext" extent overlaps with an
* existing extent.
*
* If there is an overlap discovered, it updates the length of the newext
* such that there will be no overlap, and then returns 1.
* If there is no overlap found, it returns 0.
*/
static unsigned int ext4_ext_check_overlap(struct ext4_sb_info *sbi,
struct inode *inode,
struct ext4_extent *newext,
struct ext4_ext_path *path)
{
ext4_lblk_t b1, b2;
unsigned int depth, len1;
unsigned int ret = 0;
b1 = le32_to_cpu(newext->ee_block);
len1 = ext4_ext_get_actual_len(newext);
depth = ext_depth(inode);
if (!path[depth].p_ext)
goto out;
b2 = EXT4_LBLK_CMASK(sbi, le32_to_cpu(path[depth].p_ext->ee_block));
/*
* get the next allocated block if the extent in the path
* is before the requested block(s)
*/
if (b2 < b1) {
b2 = ext4_ext_next_allocated_block(path);
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
if (b2 == EXT_MAX_BLOCKS)
goto out;
b2 = EXT4_LBLK_CMASK(sbi, b2);
}
/* check for wrap through zero on extent logical start block*/
if (b1 + len1 < b1) {
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
len1 = EXT_MAX_BLOCKS - b1;
newext->ee_len = cpu_to_le16(len1);
ret = 1;
}
/* check for overlap */
if (b1 + len1 > b2) {
newext->ee_len = cpu_to_le16(b2 - b1);
ret = 1;
}
out:
return ret;
}
/*
* ext4_ext_insert_extent:
* tries to merge requsted extent into the existing extent or
* inserts requested extent as new one into the tree,
* creating new leaf in the no-space case.
*/
int ext4_ext_insert_extent(handle_t *handle, struct inode *inode,
struct ext4_ext_path **ppath,
struct ext4_extent *newext, int gb_flags)
{
struct ext4_ext_path *path = *ppath;
struct ext4_extent_header *eh;
struct ext4_extent *ex, *fex;
struct ext4_extent *nearex; /* nearest extent */
struct ext4_ext_path *npath = NULL;
int depth, len, err;
ext4_lblk_t next;
int mb_flags = 0, unwritten;
if (gb_flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
mb_flags |= EXT4_MB_DELALLOC_RESERVED;
if (unlikely(ext4_ext_get_actual_len(newext) == 0)) {
EXT4_ERROR_INODE(inode, "ext4_ext_get_actual_len(newext) == 0");
return -EFSCORRUPTED;
}
depth = ext_depth(inode);
ex = path[depth].p_ext;
eh = path[depth].p_hdr;
if (unlikely(path[depth].p_hdr == NULL)) {
EXT4_ERROR_INODE(inode, "path[%d].p_hdr == NULL", depth);
return -EFSCORRUPTED;
}
/* try to insert block into found extent and return */
if (ex && !(gb_flags & EXT4_GET_BLOCKS_PRE_IO)) {
/*
* Try to see whether we should rather test the extent on
* right from ex, or from the left of ex. This is because
* ext4_find_extent() can return either extent on the
* left, or on the right from the searched position. This
* will make merging more effective.
*/
if (ex < EXT_LAST_EXTENT(eh) &&
(le32_to_cpu(ex->ee_block) +
ext4_ext_get_actual_len(ex) <
le32_to_cpu(newext->ee_block))) {
ex += 1;
goto prepend;
} else if ((ex > EXT_FIRST_EXTENT(eh)) &&
(le32_to_cpu(newext->ee_block) +
ext4_ext_get_actual_len(newext) <
le32_to_cpu(ex->ee_block)))
ex -= 1;
/* Try to append newex to the ex */
if (ext4_can_extents_be_merged(inode, ex, newext)) {
ext_debug("append [%d]%d block to %u:[%d]%d"
"(from %llu)\n",
ext4_ext_is_unwritten(newext),
ext4_ext_get_actual_len(newext),
le32_to_cpu(ex->ee_block),
ext4_ext_is_unwritten(ex),
ext4_ext_get_actual_len(ex),
ext4_ext_pblock(ex));
err = ext4_ext_get_access(handle, inode,
path + depth);
if (err)
return err;
unwritten = ext4_ext_is_unwritten(ex);
ex->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ex)
+ ext4_ext_get_actual_len(newext));
if (unwritten)
ext4_ext_mark_unwritten(ex);
eh = path[depth].p_hdr;
nearex = ex;
goto merge;
}
prepend:
/* Try to prepend newex to the ex */
if (ext4_can_extents_be_merged(inode, newext, ex)) {
ext_debug("prepend %u[%d]%d block to %u:[%d]%d"
"(from %llu)\n",
le32_to_cpu(newext->ee_block),
ext4_ext_is_unwritten(newext),
ext4_ext_get_actual_len(newext),
le32_to_cpu(ex->ee_block),
ext4_ext_is_unwritten(ex),
ext4_ext_get_actual_len(ex),
ext4_ext_pblock(ex));
err = ext4_ext_get_access(handle, inode,
path + depth);
if (err)
return err;
unwritten = ext4_ext_is_unwritten(ex);
ex->ee_block = newext->ee_block;
ext4_ext_store_pblock(ex, ext4_ext_pblock(newext));
ex->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ex)
+ ext4_ext_get_actual_len(newext));
if (unwritten)
ext4_ext_mark_unwritten(ex);
eh = path[depth].p_hdr;
nearex = ex;
goto merge;
}
}
depth = ext_depth(inode);
eh = path[depth].p_hdr;
if (le16_to_cpu(eh->eh_entries) < le16_to_cpu(eh->eh_max))
goto has_space;
/* probably next leaf has space for us? */
fex = EXT_LAST_EXTENT(eh);
next = EXT_MAX_BLOCKS;
if (le32_to_cpu(newext->ee_block) > le32_to_cpu(fex->ee_block))
next = ext4_ext_next_leaf_block(path);
if (next != EXT_MAX_BLOCKS) {
ext_debug("next leaf block - %u\n", next);
BUG_ON(npath != NULL);
npath = ext4_find_extent(inode, next, NULL, 0);
if (IS_ERR(npath))
return PTR_ERR(npath);
BUG_ON(npath->p_depth != path->p_depth);
eh = npath[depth].p_hdr;
if (le16_to_cpu(eh->eh_entries) < le16_to_cpu(eh->eh_max)) {
ext_debug("next leaf isn't full(%d)\n",
le16_to_cpu(eh->eh_entries));
path = npath;
goto has_space;
}
ext_debug("next leaf has no free space(%d,%d)\n",
le16_to_cpu(eh->eh_entries), le16_to_cpu(eh->eh_max));
}
/*
* There is no free space in the found leaf.
* We're gonna add a new leaf in the tree.
*/
if (gb_flags & EXT4_GET_BLOCKS_METADATA_NOFAIL)
mb_flags |= EXT4_MB_USE_RESERVED;
err = ext4_ext_create_new_leaf(handle, inode, mb_flags, gb_flags,
ppath, newext);
if (err)
goto cleanup;
depth = ext_depth(inode);
eh = path[depth].p_hdr;
has_space:
nearex = path[depth].p_ext;
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto cleanup;
if (!nearex) {
/* there is no extent in this leaf, create first one */
ext_debug("first extent in the leaf: %u:%llu:[%d]%d\n",
le32_to_cpu(newext->ee_block),
ext4_ext_pblock(newext),
ext4_ext_is_unwritten(newext),
ext4_ext_get_actual_len(newext));
nearex = EXT_FIRST_EXTENT(eh);
} else {
if (le32_to_cpu(newext->ee_block)
> le32_to_cpu(nearex->ee_block)) {
/* Insert after */
ext_debug("insert %u:%llu:[%d]%d before: "
"nearest %p\n",
le32_to_cpu(newext->ee_block),
ext4_ext_pblock(newext),
ext4_ext_is_unwritten(newext),
ext4_ext_get_actual_len(newext),
nearex);
nearex++;
} else {
/* Insert before */
BUG_ON(newext->ee_block == nearex->ee_block);
ext_debug("insert %u:%llu:[%d]%d after: "
"nearest %p\n",
le32_to_cpu(newext->ee_block),
ext4_ext_pblock(newext),
ext4_ext_is_unwritten(newext),
ext4_ext_get_actual_len(newext),
nearex);
}
len = EXT_LAST_EXTENT(eh) - nearex + 1;
if (len > 0) {
ext_debug("insert %u:%llu:[%d]%d: "
"move %d extents from 0x%p to 0x%p\n",
le32_to_cpu(newext->ee_block),
ext4_ext_pblock(newext),
ext4_ext_is_unwritten(newext),
ext4_ext_get_actual_len(newext),
len, nearex, nearex + 1);
memmove(nearex + 1, nearex,
len * sizeof(struct ext4_extent));
}
}
le16_add_cpu(&eh->eh_entries, 1);
path[depth].p_ext = nearex;
nearex->ee_block = newext->ee_block;
ext4_ext_store_pblock(nearex, ext4_ext_pblock(newext));
nearex->ee_len = newext->ee_len;
merge:
/* try to merge extents */
if (!(gb_flags & EXT4_GET_BLOCKS_PRE_IO))
ext4_ext_try_to_merge(handle, inode, path, nearex);
/* time to correct all indexes above */
err = ext4_ext_correct_indexes(handle, inode, path);
if (err)
goto cleanup;
err = ext4_ext_dirty(handle, inode, path + path->p_depth);
cleanup:
ext4_ext_drop_refs(npath);
kfree(npath);
return err;
}
static int ext4_fill_es_cache_info(struct inode *inode,
ext4_lblk_t block, ext4_lblk_t num,
struct fiemap_extent_info *fieinfo)
{
ext4_lblk_t next, end = block + num - 1;
struct extent_status es;
unsigned char blksize_bits = inode->i_sb->s_blocksize_bits;
unsigned int flags;
int err;
while (block <= end) {
next = 0;
flags = 0;
if (!ext4_es_lookup_extent(inode, block, &next, &es))
break;
if (ext4_es_is_unwritten(&es))
flags |= FIEMAP_EXTENT_UNWRITTEN;
if (ext4_es_is_delayed(&es))
flags |= (FIEMAP_EXTENT_DELALLOC |
FIEMAP_EXTENT_UNKNOWN);
if (ext4_es_is_hole(&es))
flags |= EXT4_FIEMAP_EXTENT_HOLE;
if (next == 0)
flags |= FIEMAP_EXTENT_LAST;
if (flags & (FIEMAP_EXTENT_DELALLOC|
EXT4_FIEMAP_EXTENT_HOLE))
es.es_pblk = 0;
else
es.es_pblk = ext4_es_pblock(&es);
err = fiemap_fill_next_extent(fieinfo,
(__u64)es.es_lblk << blksize_bits,
(__u64)es.es_pblk << blksize_bits,
(__u64)es.es_len << blksize_bits,
flags);
if (next == 0)
break;
block = next;
if (err < 0)
return err;
if (err == 1)
return 0;
}
return 0;
}
/*
* ext4_ext_determine_hole - determine hole around given block
* @inode: inode we lookup in
* @path: path in extent tree to @lblk
* @lblk: pointer to logical block around which we want to determine hole
*
* Determine hole length (and start if easily possible) around given logical
* block. We don't try too hard to find the beginning of the hole but @path
* actually points to extent before @lblk, we provide it.
*
* The function returns the length of a hole starting at @lblk. We update @lblk
* to the beginning of the hole if we managed to find it.
*/
static ext4_lblk_t ext4_ext_determine_hole(struct inode *inode,
struct ext4_ext_path *path,
ext4_lblk_t *lblk)
{
int depth = ext_depth(inode);
struct ext4_extent *ex;
ext4_lblk_t len;
ex = path[depth].p_ext;
if (ex == NULL) {
/* there is no extent yet, so gap is [0;-] */
*lblk = 0;
len = EXT_MAX_BLOCKS;
} else if (*lblk < le32_to_cpu(ex->ee_block)) {
len = le32_to_cpu(ex->ee_block) - *lblk;
} else if (*lblk >= le32_to_cpu(ex->ee_block)
+ ext4_ext_get_actual_len(ex)) {
ext4_lblk_t next;
*lblk = le32_to_cpu(ex->ee_block) + ext4_ext_get_actual_len(ex);
next = ext4_ext_next_allocated_block(path);
BUG_ON(next == *lblk);
len = next - *lblk;
} else {
BUG();
}
return len;
}
/*
* ext4_ext_put_gap_in_cache:
* calculate boundaries of the gap that the requested block fits into
* and cache this gap
*/
static void
ext4_ext_put_gap_in_cache(struct inode *inode, ext4_lblk_t hole_start,
ext4_lblk_t hole_len)
{
struct extent_status es;
ext4_es_find_extent_range(inode, &ext4_es_is_delayed, hole_start,
hole_start + hole_len - 1, &es);
if (es.es_len) {
/* There's delayed extent containing lblock? */
if (es.es_lblk <= hole_start)
return;
hole_len = min(es.es_lblk - hole_start, hole_len);
}
ext_debug(" -> %u:%u\n", hole_start, hole_len);
ext4_es_insert_extent(inode, hole_start, hole_len, ~0,
EXTENT_STATUS_HOLE);
}
/*
* ext4_ext_rm_idx:
* removes index from the index block.
*/
static int ext4_ext_rm_idx(handle_t *handle, struct inode *inode,
struct ext4_ext_path *path, int depth)
{
int err;
ext4_fsblk_t leaf;
/* free index block */
depth--;
path = path + depth;
leaf = ext4_idx_pblock(path->p_idx);
if (unlikely(path->p_hdr->eh_entries == 0)) {
EXT4_ERROR_INODE(inode, "path->p_hdr->eh_entries == 0");
return -EFSCORRUPTED;
}
err = ext4_ext_get_access(handle, inode, path);
if (err)
return err;
if (path->p_idx != EXT_LAST_INDEX(path->p_hdr)) {
int len = EXT_LAST_INDEX(path->p_hdr) - path->p_idx;
len *= sizeof(struct ext4_extent_idx);
memmove(path->p_idx, path->p_idx + 1, len);
}
le16_add_cpu(&path->p_hdr->eh_entries, -1);
err = ext4_ext_dirty(handle, inode, path);
if (err)
return err;
ext_debug("index is empty, remove it, free block %llu\n", leaf);
trace_ext4_ext_rm_idx(inode, leaf);
ext4_free_blocks(handle, inode, NULL, leaf, 1,
EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET);
while (--depth >= 0) {
if (path->p_idx != EXT_FIRST_INDEX(path->p_hdr))
break;
path--;
err = ext4_ext_get_access(handle, inode, path);
if (err)
break;
path->p_idx->ei_block = (path+1)->p_idx->ei_block;
err = ext4_ext_dirty(handle, inode, path);
if (err)
break;
}
return err;
}
/*
* ext4_ext_calc_credits_for_single_extent:
* This routine returns max. credits that needed to insert an extent
* to the extent tree.
* When pass the actual path, the caller should calculate credits
* under i_data_sem.
*/
int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int nrblocks,
struct ext4_ext_path *path)
{
if (path) {
int depth = ext_depth(inode);
int ret = 0;
/* probably there is space in leaf? */
if (le16_to_cpu(path[depth].p_hdr->eh_entries)
< le16_to_cpu(path[depth].p_hdr->eh_max)) {
/*
* There are some space in the leaf tree, no
* need to account for leaf block credit
*
* bitmaps and block group descriptor blocks
* and other metadata blocks still need to be
* accounted.
*/
/* 1 bitmap, 1 block group descriptor */
ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
return ret;
}
}
return ext4_chunk_trans_blocks(inode, nrblocks);
}
/*
* How many index/leaf blocks need to change/allocate to add @extents extents?
*
* If we add a single extent, then in the worse case, each tree level
* index/leaf need to be changed in case of the tree split.
*
* If more extents are inserted, they could cause the whole tree split more
* than once, but this is really rare.
*/
int ext4_ext_index_trans_blocks(struct inode *inode, int extents)
{
int index;
int depth;
/* If we are converting the inline data, only one is needed here. */
if (ext4_has_inline_data(inode))
return 1;
depth = ext_depth(inode);
if (extents <= 1)
index = depth * 2;
else
index = depth * 3;
return index;
}
static inline int get_default_free_blocks_flags(struct inode *inode)
{
if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode) ||
ext4_test_inode_flag(inode, EXT4_INODE_EA_INODE))
return EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET;
else if (ext4_should_journal_data(inode))
return EXT4_FREE_BLOCKS_FORGET;
return 0;
}
/*
* ext4_rereserve_cluster - increment the reserved cluster count when
* freeing a cluster with a pending reservation
*
* @inode - file containing the cluster
* @lblk - logical block in cluster to be reserved
*
* Increments the reserved cluster count and adjusts quota in a bigalloc
* file system when freeing a partial cluster containing at least one
* delayed and unwritten block. A partial cluster meeting that
* requirement will have a pending reservation. If so, the
* RERESERVE_CLUSTER flag is used when calling ext4_free_blocks() to
* defer reserved and allocated space accounting to a subsequent call
* to this function.
*/
static void ext4_rereserve_cluster(struct inode *inode, ext4_lblk_t lblk)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
dquot_reclaim_block(inode, EXT4_C2B(sbi, 1));
spin_lock(&ei->i_block_reservation_lock);
ei->i_reserved_data_blocks++;
percpu_counter_add(&sbi->s_dirtyclusters_counter, 1);
spin_unlock(&ei->i_block_reservation_lock);
percpu_counter_add(&sbi->s_freeclusters_counter, 1);
ext4_remove_pending(inode, lblk);
}
static int ext4_remove_blocks(handle_t *handle, struct inode *inode,
struct ext4_extent *ex,
struct partial_cluster *partial,
ext4_lblk_t from, ext4_lblk_t to)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
unsigned short ee_len = ext4_ext_get_actual_len(ex);
ext4_fsblk_t last_pblk, pblk;
ext4_lblk_t num;
int flags;
/* only extent tail removal is allowed */
if (from < le32_to_cpu(ex->ee_block) ||
to != le32_to_cpu(ex->ee_block) + ee_len - 1) {
ext4_error(sbi->s_sb,
"strange request: removal(2) %u-%u from %u:%u",
from, to, le32_to_cpu(ex->ee_block), ee_len);
return 0;
}
#ifdef EXTENTS_STATS
spin_lock(&sbi->s_ext_stats_lock);
sbi->s_ext_blocks += ee_len;
sbi->s_ext_extents++;
if (ee_len < sbi->s_ext_min)
sbi->s_ext_min = ee_len;
if (ee_len > sbi->s_ext_max)
sbi->s_ext_max = ee_len;
if (ext_depth(inode) > sbi->s_depth_max)
sbi->s_depth_max = ext_depth(inode);
spin_unlock(&sbi->s_ext_stats_lock);
#endif
trace_ext4_remove_blocks(inode, ex, from, to, partial);
/*
* if we have a partial cluster, and it's different from the
* cluster of the last block in the extent, we free it
*/
last_pblk = ext4_ext_pblock(ex) + ee_len - 1;
if (partial->state != initial &&
partial->pclu != EXT4_B2C(sbi, last_pblk)) {
if (partial->state == tofree) {
flags = get_default_free_blocks_flags(inode);
if (ext4_is_pending(inode, partial->lblk))
flags |= EXT4_FREE_BLOCKS_RERESERVE_CLUSTER;
ext4_free_blocks(handle, inode, NULL,
EXT4_C2B(sbi, partial->pclu),
sbi->s_cluster_ratio, flags);
if (flags & EXT4_FREE_BLOCKS_RERESERVE_CLUSTER)
ext4_rereserve_cluster(inode, partial->lblk);
}
partial->state = initial;
}
num = le32_to_cpu(ex->ee_block) + ee_len - from;
pblk = ext4_ext_pblock(ex) + ee_len - num;
/*
* We free the partial cluster at the end of the extent (if any),
* unless the cluster is used by another extent (partial_cluster
* state is nofree). If a partial cluster exists here, it must be
* shared with the last block in the extent.
*/
flags = get_default_free_blocks_flags(inode);
/* partial, left end cluster aligned, right end unaligned */
if ((EXT4_LBLK_COFF(sbi, to) != sbi->s_cluster_ratio - 1) &&
(EXT4_LBLK_CMASK(sbi, to) >= from) &&
(partial->state != nofree)) {
if (ext4_is_pending(inode, to))
flags |= EXT4_FREE_BLOCKS_RERESERVE_CLUSTER;
ext4_free_blocks(handle, inode, NULL,
EXT4_PBLK_CMASK(sbi, last_pblk),
sbi->s_cluster_ratio, flags);
if (flags & EXT4_FREE_BLOCKS_RERESERVE_CLUSTER)
ext4_rereserve_cluster(inode, to);
partial->state = initial;
flags = get_default_free_blocks_flags(inode);
}
flags |= EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER;
ext4: make punch hole code path work with bigalloc Currently punch hole is disabled in file systems with bigalloc feature enabled. However the recent changes in punch hole patch should make it easier to support punching holes on bigalloc enabled file systems. This commit changes partial_cluster handling in ext4_remove_blocks(), ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently partial_cluster is unsigned long long type and it makes sure that we will free the partial cluster if all extents has been released from that cluster. However it has been specifically designed only for truncate. With punch hole we can be freeing just some extents in the cluster leaving the rest untouched. So we have to make sure that we will notice cluster which still has some extents. To do this I've changed partial_cluster to be signed long long type. The only scenario where this could be a problem is when cluster_size == block size, however in that case there would not be any partial clusters so we're safe. For bigger clusters the signed type is enough. Now we use the negative value in partial_cluster to mark such cluster used, hence we know that we must not free it even if all other extents has been freed from such cluster. This scenario can be described in simple diagram: |FFF...FF..FF.UUU| ^----------^ punch hole . - free space | - cluster boundary F - freed extent U - used extent Also update respective tracepoints to use signed long long type for partial_cluster. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-28 03:33:35 +00:00
/*
* For bigalloc file systems, we never free a partial cluster
* at the beginning of the extent. Instead, we check to see if we
* need to free it on a subsequent call to ext4_remove_blocks,
* or at the end of ext4_ext_rm_leaf or ext4_ext_remove_space.
*/
flags |= EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER;
ext4_free_blocks(handle, inode, NULL, pblk, num, flags);
/* reset the partial cluster if we've freed past it */
if (partial->state != initial && partial->pclu != EXT4_B2C(sbi, pblk))
partial->state = initial;
/*
* If we've freed the entire extent but the beginning is not left
* cluster aligned and is not marked as ineligible for freeing we
* record the partial cluster at the beginning of the extent. It
* wasn't freed by the preceding ext4_free_blocks() call, and we
* need to look farther to the left to determine if it's to be freed
* (not shared with another extent). Else, reset the partial
* cluster - we're either done freeing or the beginning of the
* extent is left cluster aligned.
*/
if (EXT4_LBLK_COFF(sbi, from) && num == ee_len) {
if (partial->state == initial) {
partial->pclu = EXT4_B2C(sbi, pblk);
partial->lblk = from;
partial->state = tofree;
}
} else {
partial->state = initial;
}
return 0;
}
/*
* ext4_ext_rm_leaf() Removes the extents associated with the
* blocks appearing between "start" and "end". Both "start"
* and "end" must appear in the same extent or EIO is returned.
*
* @handle: The journal handle
* @inode: The files inode
* @path: The path to the leaf
ext4: make punch hole code path work with bigalloc Currently punch hole is disabled in file systems with bigalloc feature enabled. However the recent changes in punch hole patch should make it easier to support punching holes on bigalloc enabled file systems. This commit changes partial_cluster handling in ext4_remove_blocks(), ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently partial_cluster is unsigned long long type and it makes sure that we will free the partial cluster if all extents has been released from that cluster. However it has been specifically designed only for truncate. With punch hole we can be freeing just some extents in the cluster leaving the rest untouched. So we have to make sure that we will notice cluster which still has some extents. To do this I've changed partial_cluster to be signed long long type. The only scenario where this could be a problem is when cluster_size == block size, however in that case there would not be any partial clusters so we're safe. For bigger clusters the signed type is enough. Now we use the negative value in partial_cluster to mark such cluster used, hence we know that we must not free it even if all other extents has been freed from such cluster. This scenario can be described in simple diagram: |FFF...FF..FF.UUU| ^----------^ punch hole . - free space | - cluster boundary F - freed extent U - used extent Also update respective tracepoints to use signed long long type for partial_cluster. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-28 03:33:35 +00:00
* @partial_cluster: The cluster which we'll have to free if all extents
* has been released from it. However, if this value is
* negative, it's a cluster just to the right of the
* punched region and it must not be freed.
* @start: The first block to remove
* @end: The last block to remove
*/
static int
ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
ext4: make punch hole code path work with bigalloc Currently punch hole is disabled in file systems with bigalloc feature enabled. However the recent changes in punch hole patch should make it easier to support punching holes on bigalloc enabled file systems. This commit changes partial_cluster handling in ext4_remove_blocks(), ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently partial_cluster is unsigned long long type and it makes sure that we will free the partial cluster if all extents has been released from that cluster. However it has been specifically designed only for truncate. With punch hole we can be freeing just some extents in the cluster leaving the rest untouched. So we have to make sure that we will notice cluster which still has some extents. To do this I've changed partial_cluster to be signed long long type. The only scenario where this could be a problem is when cluster_size == block size, however in that case there would not be any partial clusters so we're safe. For bigger clusters the signed type is enough. Now we use the negative value in partial_cluster to mark such cluster used, hence we know that we must not free it even if all other extents has been freed from such cluster. This scenario can be described in simple diagram: |FFF...FF..FF.UUU| ^----------^ punch hole . - free space | - cluster boundary F - freed extent U - used extent Also update respective tracepoints to use signed long long type for partial_cluster. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-28 03:33:35 +00:00
struct ext4_ext_path *path,
struct partial_cluster *partial,
ext4_lblk_t start, ext4_lblk_t end)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
int err = 0, correct_index = 0;
int depth = ext_depth(inode), credits, revoke_credits;
struct ext4_extent_header *eh;
ext4_lblk_t a, b;
unsigned num;
ext4_lblk_t ex_ee_block;
unsigned short ex_ee_len;
unsigned unwritten = 0;
struct ext4_extent *ex;
ext4: make punch hole code path work with bigalloc Currently punch hole is disabled in file systems with bigalloc feature enabled. However the recent changes in punch hole patch should make it easier to support punching holes on bigalloc enabled file systems. This commit changes partial_cluster handling in ext4_remove_blocks(), ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently partial_cluster is unsigned long long type and it makes sure that we will free the partial cluster if all extents has been released from that cluster. However it has been specifically designed only for truncate. With punch hole we can be freeing just some extents in the cluster leaving the rest untouched. So we have to make sure that we will notice cluster which still has some extents. To do this I've changed partial_cluster to be signed long long type. The only scenario where this could be a problem is when cluster_size == block size, however in that case there would not be any partial clusters so we're safe. For bigger clusters the signed type is enough. Now we use the negative value in partial_cluster to mark such cluster used, hence we know that we must not free it even if all other extents has been freed from such cluster. This scenario can be described in simple diagram: |FFF...FF..FF.UUU| ^----------^ punch hole . - free space | - cluster boundary F - freed extent U - used extent Also update respective tracepoints to use signed long long type for partial_cluster. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-28 03:33:35 +00:00
ext4_fsblk_t pblk;
/* the header must be checked already in ext4_ext_remove_space() */
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
ext_debug("truncate since %u in leaf to %u\n", start, end);
if (!path[depth].p_hdr)
path[depth].p_hdr = ext_block_hdr(path[depth].p_bh);
eh = path[depth].p_hdr;
if (unlikely(path[depth].p_hdr == NULL)) {
EXT4_ERROR_INODE(inode, "path[%d].p_hdr == NULL", depth);
return -EFSCORRUPTED;
}
/* find where to start removing */
ex = path[depth].p_ext;
if (!ex)
ex = EXT_LAST_EXTENT(eh);
ex_ee_block = le32_to_cpu(ex->ee_block);
ex_ee_len = ext4_ext_get_actual_len(ex);
trace_ext4_ext_rm_leaf(inode, start, ex, partial);
while (ex >= EXT_FIRST_EXTENT(eh) &&
ex_ee_block + ex_ee_len > start) {
if (ext4_ext_is_unwritten(ex))
unwritten = 1;
else
unwritten = 0;
ext_debug("remove ext %u:[%d]%d\n", ex_ee_block,
unwritten, ex_ee_len);
path[depth].p_ext = ex;
a = ex_ee_block > start ? ex_ee_block : start;
b = ex_ee_block+ex_ee_len - 1 < end ?
ex_ee_block+ex_ee_len - 1 : end;
ext_debug(" border %u:%u\n", a, b);
/* If this extent is beyond the end of the hole, skip it */
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
if (end < ex_ee_block) {
ext4: make punch hole code path work with bigalloc Currently punch hole is disabled in file systems with bigalloc feature enabled. However the recent changes in punch hole patch should make it easier to support punching holes on bigalloc enabled file systems. This commit changes partial_cluster handling in ext4_remove_blocks(), ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently partial_cluster is unsigned long long type and it makes sure that we will free the partial cluster if all extents has been released from that cluster. However it has been specifically designed only for truncate. With punch hole we can be freeing just some extents in the cluster leaving the rest untouched. So we have to make sure that we will notice cluster which still has some extents. To do this I've changed partial_cluster to be signed long long type. The only scenario where this could be a problem is when cluster_size == block size, however in that case there would not be any partial clusters so we're safe. For bigger clusters the signed type is enough. Now we use the negative value in partial_cluster to mark such cluster used, hence we know that we must not free it even if all other extents has been freed from such cluster. This scenario can be described in simple diagram: |FFF...FF..FF.UUU| ^----------^ punch hole . - free space | - cluster boundary F - freed extent U - used extent Also update respective tracepoints to use signed long long type for partial_cluster. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-28 03:33:35 +00:00
/*
* We're going to skip this extent and move to another,
* so note that its first cluster is in use to avoid
* freeing it when removing blocks. Eventually, the
* right edge of the truncated/punched region will
* be just to the left.
ext4: make punch hole code path work with bigalloc Currently punch hole is disabled in file systems with bigalloc feature enabled. However the recent changes in punch hole patch should make it easier to support punching holes on bigalloc enabled file systems. This commit changes partial_cluster handling in ext4_remove_blocks(), ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently partial_cluster is unsigned long long type and it makes sure that we will free the partial cluster if all extents has been released from that cluster. However it has been specifically designed only for truncate. With punch hole we can be freeing just some extents in the cluster leaving the rest untouched. So we have to make sure that we will notice cluster which still has some extents. To do this I've changed partial_cluster to be signed long long type. The only scenario where this could be a problem is when cluster_size == block size, however in that case there would not be any partial clusters so we're safe. For bigger clusters the signed type is enough. Now we use the negative value in partial_cluster to mark such cluster used, hence we know that we must not free it even if all other extents has been freed from such cluster. This scenario can be described in simple diagram: |FFF...FF..FF.UUU| ^----------^ punch hole . - free space | - cluster boundary F - freed extent U - used extent Also update respective tracepoints to use signed long long type for partial_cluster. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2013-05-28 03:33:35 +00:00
*/
if (sbi->s_cluster_ratio > 1) {
pblk = ext4_ext_pblock(ex);
partial->pclu = EXT4_B2C(sbi, pblk);
partial->state = nofree;
}
ex--;
ex_ee_block = le32_to_cpu(ex->ee_block);
ex_ee_len = ext4_ext_get_actual_len(ex);
continue;
} else if (b != ex_ee_block + ex_ee_len - 1) {
EXT4_ERROR_INODE(inode,
"can not handle truncate %u:%u "
"on extent %u:%u",
start, end, ex_ee_block,
ex_ee_block + ex_ee_len - 1);
err = -EFSCORRUPTED;
goto out;
} else if (a != ex_ee_block) {
/* remove tail of the extent */
num = a - ex_ee_block;
} else {
/* remove whole extent: excellent! */
num = 0;
}
/*
* 3 for leaf, sb, and inode plus 2 (bmap and group
* descriptor) for each block group; assume two block
* groups plus ex_ee_len/blocks_per_block_group for
* the worst case
*/
credits = 7 + 2*(ex_ee_len/EXT4_BLOCKS_PER_GROUP(inode->i_sb));
if (ex == EXT_FIRST_EXTENT(eh)) {
correct_index = 1;
credits += (ext_depth(inode)) + 1;
}
credits += EXT4_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb);
/*
* We may end up freeing some index blocks and data from the
* punched range. Note that partial clusters are accounted for
* by ext4_free_data_revoke_credits().
*/
revoke_credits =
ext4_free_metadata_revoke_credits(inode->i_sb,
ext_depth(inode)) +
ext4_free_data_revoke_credits(inode, b - a + 1);
err = ext4_datasem_ensure_credits(handle, inode, credits,
credits, revoke_credits);
if (err) {
if (err > 0)
err = -EAGAIN;
goto out;
}
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto out;
err = ext4_remove_blocks(handle, inode, ex, partial, a, b);
if (err)
goto out;
if (num == 0)
/* this extent is removed; mark slot entirely unused */
ext4_ext_store_pblock(ex, 0);
ex->ee_len = cpu_to_le16(num);
/*
* Do not mark unwritten if all the blocks in the
* extent have been removed.
*/
if (unwritten && num)
ext4_ext_mark_unwritten(ex);
/*
* If the extent was completely released,
* we need to remove it from the leaf
*/
if (num == 0) {
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
if (end != EXT_MAX_BLOCKS - 1) {
/*
* For hole punching, we need to scoot all the
* extents up when an extent is removed so that
* we dont have blank extents in the middle
*/
memmove(ex, ex+1, (EXT_LAST_EXTENT(eh) - ex) *
sizeof(struct ext4_extent));
/* Now get rid of the one at the end */
memset(EXT_LAST_EXTENT(eh), 0,
sizeof(struct ext4_extent));
}
le16_add_cpu(&eh->eh_entries, -1);
}
err = ext4_ext_dirty(handle, inode, path + depth);
if (err)
goto out;
ext_debug("new extent: %u:%u:%llu\n", ex_ee_block, num,
ext4_ext_pblock(ex));
ex--;
ex_ee_block = le32_to_cpu(ex->ee_block);
ex_ee_len = ext4_ext_get_actual_len(ex);
}
if (correct_index && eh->eh_entries)
err = ext4_ext_correct_indexes(handle, inode, path);
/*
* If there's a partial cluster and at least one extent remains in
* the leaf, free the partial cluster if it isn't shared with the
* current extent. If it is shared with the current extent
* we reset the partial cluster because we've reached the start of the
* truncated/punched region and we're done removing blocks.
*/
if (partial->state == tofree && ex >= EXT_FIRST_EXTENT(eh)) {
pblk = ext4_ext_pblock(ex) + ex_ee_len - 1;
if (partial->pclu != EXT4_B2C(sbi, pblk)) {
int flags = get_default_free_blocks_flags(inode);
if (ext4_is_pending(inode, partial->lblk))
flags |= EXT4_FREE_BLOCKS_RERESERVE_CLUSTER;
ext4_free_blocks(handle, inode, NULL,
EXT4_C2B(sbi, partial->pclu),
sbi->s_cluster_ratio, flags);
if (flags & EXT4_FREE_BLOCKS_RERESERVE_CLUSTER)
ext4_rereserve_cluster(inode, partial->lblk);
}
partial->state = initial;
}
/* if this leaf is free, then we should
* remove it from index block above */
if (err == 0 && eh->eh_entries == 0 && path[depth].p_bh != NULL)
err = ext4_ext_rm_idx(handle, inode, path, depth);
out:
return err;
}
/*
* ext4_ext_more_to_rm:
* returns 1 if current index has to be freed (even partial)
*/
static int
ext4_ext_more_to_rm(struct ext4_ext_path *path)
{
BUG_ON(path->p_idx == NULL);
if (path->p_idx < EXT_FIRST_INDEX(path->p_hdr))
return 0;
/*
* if truncate on deeper level happened, it wasn't partial,
* so we have to consider current index for truncation
*/
if (le16_to_cpu(path->p_hdr->eh_entries) == path->p_block)
return 0;
return 1;
}
int ext4_ext_remove_space(struct inode *inode, ext4_lblk_t start,
ext4_lblk_t end)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
int depth = ext_depth(inode);
struct ext4_ext_path *path = NULL;
struct partial_cluster partial;
handle_t *handle;
int i = 0, err = 0;
partial.pclu = 0;
partial.lblk = 0;
partial.state = initial;
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
ext_debug("truncate since %u to %u\n", start, end);
/* probably first extent we're gonna free will be last in block */
handle = ext4_journal_start_with_revoke(inode, EXT4_HT_TRUNCATE,
depth + 1,
ext4_free_metadata_revoke_credits(inode->i_sb, depth));
if (IS_ERR(handle))
return PTR_ERR(handle);
again:
trace_ext4_ext_remove_space(inode, start, end, depth);
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
/*
* Check if we are removing extents inside the extent tree. If that
* is the case, we are going to punch a hole inside the extent tree
* so we have to check whether we need to split the extent covering
* the last block to remove so we can easily remove the part of it
* in ext4_ext_rm_leaf().
*/
if (end < EXT_MAX_BLOCKS - 1) {
struct ext4_extent *ex;
ext4_lblk_t ee_block, ex_end, lblk;
ext4_fsblk_t pblk;
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
/* find extent for or closest extent to this block */
path = ext4_find_extent(inode, end, NULL, EXT4_EX_NOCACHE);
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
if (IS_ERR(path)) {
ext4_journal_stop(handle);
return PTR_ERR(path);
}
depth = ext_depth(inode);
/* Leaf not may not exist only if inode has no blocks at all */
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
ex = path[depth].p_ext;
if (!ex) {
if (depth) {
EXT4_ERROR_INODE(inode,
"path[%d].p_hdr == NULL",
depth);
err = -EFSCORRUPTED;
}
goto out;
}
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
ee_block = le32_to_cpu(ex->ee_block);
ex_end = ee_block + ext4_ext_get_actual_len(ex) - 1;
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
/*
* See if the last block is inside the extent, if so split
* the extent at 'end' block so we can easily remove the
* tail of the first part of the split extent in
* ext4_ext_rm_leaf().
*/
if (end >= ee_block && end < ex_end) {
/*
* If we're going to split the extent, note that
* the cluster containing the block after 'end' is
* in use to avoid freeing it when removing blocks.
*/
if (sbi->s_cluster_ratio > 1) {
pblk = ext4_ext_pblock(ex) + end - ee_block + 2;
partial.pclu = EXT4_B2C(sbi, pblk);
partial.state = nofree;
}
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
/*
* Split the extent in two so that 'end' is the last
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
* block in the first new extent. Also we should not
* fail removing space due to ENOSPC so try to use
* reserved block if that happens.
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
*/
err = ext4_force_split_extent_at(handle, inode, &path,
end + 1, 1);
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
if (err < 0)
goto out;
} else if (sbi->s_cluster_ratio > 1 && end >= ex_end &&
partial.state == initial) {
/*
* If we're punching, there's an extent to the right.
* If the partial cluster hasn't been set, set it to
* that extent's first cluster and its state to nofree
* so it won't be freed should it contain blocks to be
* removed. If it's already set (tofree/nofree), we're
* retrying and keep the original partial cluster info
* so a cluster marked tofree as a result of earlier
* extent removal is not lost.
*/
lblk = ex_end + 1;
err = ext4_ext_search_right(inode, path, &lblk, &pblk,
&ex);
if (err)
goto out;
if (pblk) {
partial.pclu = EXT4_B2C(sbi, pblk);
partial.state = nofree;
}
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
}
}
/*
* We start scanning from right side, freeing all the blocks
* after i_size and walking into the tree depth-wise.
*/
depth = ext_depth(inode);
if (path) {
int k = i = depth;
while (--k > 0)
path[k].p_block =
le16_to_cpu(path[k].p_hdr->eh_entries)+1;
} else {
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:03:40 +00:00
path = kcalloc(depth + 1, sizeof(struct ext4_ext_path),
GFP_NOFS);
if (path == NULL) {
ext4_journal_stop(handle);
return -ENOMEM;
}
path[0].p_maxdepth = path[0].p_depth = depth;
path[0].p_hdr = ext_inode_hdr(inode);
ext4: fix kernel BUG on large-scale rm -rf commands Commit 968dee7722: "ext4: fix hole punch failure when depth is greater than 0" introduced a regression in v3.5.1/v3.6-rc1 which caused kernel crashes when users ran run "rm -rf" on large directory hierarchy on ext4 filesystems on RAID devices: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 Process rm (pid: 18229, threadinfo ffff8801276bc000, task ffff880123631710) Call Trace: [<ffffffff81236483>] ? __ext4_handle_dirty_metadata+0x83/0x110 [<ffffffff812353d3>] ext4_ext_truncate+0x193/0x1d0 [<ffffffff8120a8cf>] ? ext4_mark_inode_dirty+0x7f/0x1f0 [<ffffffff81207e05>] ext4_truncate+0xf5/0x100 [<ffffffff8120cd51>] ext4_evict_inode+0x461/0x490 [<ffffffff811a1312>] evict+0xa2/0x1a0 [<ffffffff811a1513>] iput+0x103/0x1f0 [<ffffffff81196d84>] do_unlinkat+0x154/0x1c0 [<ffffffff8118cc3a>] ? sys_newfstatat+0x2a/0x40 [<ffffffff81197b0b>] sys_unlinkat+0x1b/0x50 [<ffffffff816135e9>] system_call_fastpath+0x16/0x1b Code: 8b 4d 20 0f b7 41 02 48 8d 04 40 48 8d 04 81 49 89 45 18 0f b7 49 02 48 83 c1 01 49 89 4d 00 e9 ae f8 ff ff 0f 1f 00 49 8b 45 28 <48> 8b 40 28 49 89 45 20 e9 85 f8 ff ff 0f 1f 80 00 00 00 RIP [<ffffffff81233164>] ext4_ext_remove_space+0xa34/0xdf0 This could be reproduced as follows: The problem in commit 968dee7722 was that caused the variable 'i' to be left uninitialized if the truncate required more space than was available in the journal. This resulted in the function ext4_ext_truncate_extend_restart() returning -EAGAIN, which caused ext4_ext_remove_space() to restart the truncate operation after starting a new jbd2 handle. Reported-by: Maciej Żenczykowski <maze@google.com> Reported-by: Marti Raudsepp <marti@juffo.org> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2012-08-17 12:54:52 +00:00
i = 0;
ext4: rewrite punch hole to use ext4_ext_remove_space() This commit rewrites ext4 punch hole implementation to use ext4_ext_remove_space() instead of its home gown way of doing this via ext4_ext_map_blocks(). There are several reasons for changing this. Firstly it is quite non obvious that punching hole needs to ext4_ext_map_blocks() to punch a hole, especially given that this function should map blocks, not unmap it. It also required a lot of new code in ext4_ext_map_blocks(). Secondly the design of it is not very effective. The reason is that we are trying to punch out blocks in ext4_ext_punch_hole() in opposite direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf() to iterate through the whole tree from the end to the start to find the requested extent for every extent we are going to punch out. And finally the current implementation does not use the existing code, but bring a lot of new code, which is IMO unnecessary since there already is some infrastructure we can use. Specifically ext4_ext_remove_space(). This commit changes ext4_ext_remove_space() to accept 'end' parameter so we can not only truncate to the end of file, but also remove the space in the middle of the file (punch a hole). Moreover, because the last block to punch out, might be in the middle of the extent, we have to split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either remove the whole fist part of split extent, or change its size. ext4_ext_remove_space() is then used to actually remove the space (extents) from within the hole, instead of ext4_ext_map_blocks(). Note that this also fix the issue with punch hole, where we would forget to remove empty index blocks from the extent tree, resulting in double free block error and file system corruption. This is simply because we now use different code path, where this problem does not exist. This has been tested with fsx running for several days and xfstests, plus xfstest #251 with '-o discard' run on the loop image (which converts discard requestes into punch hole to the backing file). All of it on 1K and 4K file system block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-20 03:03:19 +00:00
if (ext4_ext_check(inode, path[0].p_hdr, depth, 0)) {
err = -EFSCORRUPTED;
goto out;
}
}
err = 0;
while (i >= 0 && err == 0) {
if (i == depth) {
/* this is leaf block */
err = ext4_ext_rm_leaf(handle, inode, path,
&partial, start, end);
/* root level has p_bh == NULL, brelse() eats this */
brelse(path[i].p_bh);
path[i].p_bh = NULL;
i--;
continue;
}
/* this is index block */
if (!path[i].p_hdr) {
ext_debug("initialize header\n");
path[i].p_hdr = ext_block_hdr(path[i].p_bh);
}
if (!path[i].p_idx) {
/* this level hasn't been touched yet */
path[i].p_idx = EXT_LAST_INDEX(path[i].p_hdr);
path[i].p_block = le16_to_cpu(path[i].p_hdr->eh_entries)+1;
ext_debug("init index ptr: hdr 0x%p, num %d\n",
path[i].p_hdr,
le16_to_cpu(path[i].p_hdr->eh_entries));
} else {
/* we were already here, see at next index */
path[i].p_idx--;
}
ext_debug("level %d - index, first 0x%p, cur 0x%p\n",
i, EXT_FIRST_INDEX(path[i].p_hdr),
path[i].p_idx);
if (ext4_ext_more_to_rm(path + i)) {
struct buffer_head *bh;
/* go to the next level */
ext_debug("move to level %d (block %llu)\n",
i + 1, ext4_idx_pblock(path[i].p_idx));
memset(path + i + 1, 0, sizeof(*path));
bh = read_extent_tree_block(inode,
ext4_idx_pblock(path[i].p_idx), depth - i - 1,
EXT4_EX_NOCACHE);
if (IS_ERR(bh)) {
/* should we reset i_size? */
err = PTR_ERR(bh);
break;
}
/* Yield here to deal with large extent trees.
* Should be a no-op if we did IO above. */
cond_resched();
if (WARN_ON(i + 1 > depth)) {
err = -EFSCORRUPTED;
break;
}
path[i + 1].p_bh = bh;
/* save actual number of indexes since this
* number is changed at the next iteration */
path[i].p_block = le16_to_cpu(path[i].p_hdr->eh_entries);
i++;
} else {
/* we finished processing this index, go up */
if (path[i].p_hdr->eh_entries == 0 && i > 0) {
/* index is empty, remove it;
* handle must be already prepared by the
* truncatei_leaf() */
err = ext4_ext_rm_idx(handle, inode, path, i);
}
/* root level has p_bh == NULL, brelse() eats this */
brelse(path[i].p_bh);
path[i].p_bh = NULL;
i--;
ext_debug("return to level %d\n", i);
}
}
trace_ext4_ext_remove_space_done(inode, start, end, depth, &partial,
path->p_hdr->eh_entries);
/*
* if there's a partial cluster and we have removed the first extent
* in the file, then we also free the partial cluster, if any
*/
if (partial.state == tofree && err == 0) {
int flags = get_default_free_blocks_flags(inode);
if (ext4_is_pending(inode, partial.lblk))
flags |= EXT4_FREE_BLOCKS_RERESERVE_CLUSTER;
ext4_free_blocks(handle, inode, NULL,
EXT4_C2B(sbi, partial.pclu),
sbi->s_cluster_ratio, flags);
if (flags & EXT4_FREE_BLOCKS_RERESERVE_CLUSTER)
ext4_rereserve_cluster(inode, partial.lblk);
partial.state = initial;
}
/* TODO: flexible tree reduction should be here */
if (path->p_hdr->eh_entries == 0) {
/*
* truncate to zero freed all the tree,
* so we need to correct eh_depth
*/
err = ext4_ext_get_access(handle, inode, path);
if (err == 0) {
ext_inode_hdr(inode)->eh_depth = 0;
ext_inode_hdr(inode)->eh_max =
cpu_to_le16(ext4_ext_space_root(inode, 0));
err = ext4_ext_dirty(handle, inode, path);
}
}
out:
ext4_ext_drop_refs(path);
kfree(path);
path = NULL;
if (err == -EAGAIN)
goto again;
ext4_journal_stop(handle);
return err;
}
/*
* called at mount time
*/
void ext4_ext_init(struct super_block *sb)
{
/*
* possible initialization would be here
*/
if (ext4_has_feature_extents(sb)) {
#if defined(AGGRESSIVE_TEST) || defined(CHECK_BINSEARCH) || defined(EXTENTS_STATS)
printk(KERN_INFO "EXT4-fs: file extents enabled"
#ifdef AGGRESSIVE_TEST
", aggressive tests"
#endif
#ifdef CHECK_BINSEARCH
", check binsearch"
#endif
#ifdef EXTENTS_STATS
", stats"
#endif
"\n");
#endif
#ifdef EXTENTS_STATS
spin_lock_init(&EXT4_SB(sb)->s_ext_stats_lock);
EXT4_SB(sb)->s_ext_min = 1 << 30;
EXT4_SB(sb)->s_ext_max = 0;
#endif
}
}
/*
* called at umount time
*/
void ext4_ext_release(struct super_block *sb)
{
if (!ext4_has_feature_extents(sb))
return;
#ifdef EXTENTS_STATS
if (EXT4_SB(sb)->s_ext_blocks && EXT4_SB(sb)->s_ext_extents) {
struct ext4_sb_info *sbi = EXT4_SB(sb);
printk(KERN_ERR "EXT4-fs: %lu blocks in %lu extents (%lu ave)\n",
sbi->s_ext_blocks, sbi->s_ext_extents,
sbi->s_ext_blocks / sbi->s_ext_extents);
printk(KERN_ERR "EXT4-fs: extents: %lu min, %lu max, max depth %lu\n",
sbi->s_ext_min, sbi->s_ext_max, sbi->s_depth_max);
}
#endif
}
static int ext4_zeroout_es(struct inode *inode, struct ext4_extent *ex)
{
ext4_lblk_t ee_block;
ext4_fsblk_t ee_pblock;
unsigned int ee_len;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
ee_pblock = ext4_ext_pblock(ex);
if (ee_len == 0)
return 0;
return ext4_es_insert_extent(inode, ee_block, ee_len, ee_pblock,
EXTENT_STATUS_WRITTEN);
}
/* FIXME!! we need to try to merge to left or right after zero-out */
static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex)
{
ext4_fsblk_t ee_pblock;
unsigned int ee_len;
ee_len = ext4_ext_get_actual_len(ex);
ee_pblock = ext4_ext_pblock(ex);
return ext4_issue_zeroout(inode, le32_to_cpu(ex->ee_block), ee_pblock,
ee_len);
}
/*
* ext4_split_extent_at() splits an extent at given block.
*
* @handle: the journal handle
* @inode: the file inode
* @path: the path to the extent
* @split: the logical block where the extent is splitted.
* @split_flags: indicates if the extent could be zeroout if split fails, and
* the states(init or unwritten) of new extents.
* @flags: flags used to insert new extent to extent tree.
*
*
* Splits extent [a, b] into two extents [a, @split) and [@split, b], states
* of which are deterimined by split_flag.
*
* There are two cases:
* a> the extent are splitted into two extent.
* b> split is not needed, and just mark the extent.
*
* return 0 on success.
*/
static int ext4_split_extent_at(handle_t *handle,
struct inode *inode,
struct ext4_ext_path **ppath,
ext4_lblk_t split,
int split_flag,
int flags)
{
struct ext4_ext_path *path = *ppath;
ext4_fsblk_t newblock;
ext4_lblk_t ee_block;
struct ext4_extent *ex, newex, orig_ex, zero_ex;
struct ext4_extent *ex2 = NULL;
unsigned int ee_len, depth;
int err = 0;
BUG_ON((split_flag & (EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2)) ==
(EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2));
ext_debug("ext4_split_extents_at: inode %lu, logical"
"block %llu\n", inode->i_ino, (unsigned long long)split);
ext4_ext_show_leaf(inode, path);
depth = ext_depth(inode);
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
newblock = split - ee_block + ext4_ext_pblock(ex);
BUG_ON(split < ee_block || split >= (ee_block + ee_len));
BUG_ON(!ext4_ext_is_unwritten(ex) &&
split_flag & (EXT4_EXT_MAY_ZEROOUT |
EXT4_EXT_MARK_UNWRIT1 |
EXT4_EXT_MARK_UNWRIT2));
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto out;
if (split == ee_block) {
/*
* case b: block @split is the block that the extent begins with
* then we just change the state of the extent, and splitting
* is not needed.
*/
if (split_flag & EXT4_EXT_MARK_UNWRIT2)
ext4_ext_mark_unwritten(ex);
else
ext4_ext_mark_initialized(ex);
if (!(flags & EXT4_GET_BLOCKS_PRE_IO))
ext4_ext_try_to_merge(handle, inode, path, ex);
err = ext4_ext_dirty(handle, inode, path + path->p_depth);
goto out;
}
/* case a */
memcpy(&orig_ex, ex, sizeof(orig_ex));
ex->ee_len = cpu_to_le16(split - ee_block);
if (split_flag & EXT4_EXT_MARK_UNWRIT1)
ext4_ext_mark_unwritten(ex);
/*
* path may lead to new leaf, not to original leaf any more
* after ext4_ext_insert_extent() returns,
*/
err = ext4_ext_dirty(handle, inode, path + depth);
if (err)
goto fix_extent_len;
ex2 = &newex;
ex2->ee_block = cpu_to_le32(split);
ex2->ee_len = cpu_to_le16(ee_len - (split - ee_block));
ext4_ext_store_pblock(ex2, newblock);
if (split_flag & EXT4_EXT_MARK_UNWRIT2)
ext4_ext_mark_unwritten(ex2);
err = ext4_ext_insert_extent(handle, inode, ppath, &newex, flags);
if (err == -ENOSPC && (EXT4_EXT_MAY_ZEROOUT & split_flag)) {
if (split_flag & (EXT4_EXT_DATA_VALID1|EXT4_EXT_DATA_VALID2)) {
if (split_flag & EXT4_EXT_DATA_VALID1) {
err = ext4_ext_zeroout(inode, ex2);
zero_ex.ee_block = ex2->ee_block;
zero_ex.ee_len = cpu_to_le16(
ext4_ext_get_actual_len(ex2));
ext4_ext_store_pblock(&zero_ex,
ext4_ext_pblock(ex2));
} else {
err = ext4_ext_zeroout(inode, ex);
zero_ex.ee_block = ex->ee_block;
zero_ex.ee_len = cpu_to_le16(
ext4_ext_get_actual_len(ex));
ext4_ext_store_pblock(&zero_ex,
ext4_ext_pblock(ex));
}
} else {
err = ext4_ext_zeroout(inode, &orig_ex);
zero_ex.ee_block = orig_ex.ee_block;
zero_ex.ee_len = cpu_to_le16(
ext4_ext_get_actual_len(&orig_ex));
ext4_ext_store_pblock(&zero_ex,
ext4_ext_pblock(&orig_ex));
}
if (err)
goto fix_extent_len;
/* update the extent length and mark as initialized */
ex->ee_len = cpu_to_le16(ee_len);
ext4_ext_try_to_merge(handle, inode, path, ex);
err = ext4_ext_dirty(handle, inode, path + path->p_depth);
if (err)
goto fix_extent_len;
/* update extent status tree */
err = ext4_zeroout_es(inode, &zero_ex);
goto out;
} else if (err)
goto fix_extent_len;
out:
ext4_ext_show_leaf(inode, path);
return err;
fix_extent_len:
ex->ee_len = orig_ex.ee_len;
ext4_ext_dirty(handle, inode, path + path->p_depth);
return err;
}
/*
* ext4_split_extents() splits an extent and mark extent which is covered
* by @map as split_flags indicates
*
* It may result in splitting the extent into multiple extents (up to three)
* There are three possibilities:
* a> There is no split required
* b> Splits in two extents: Split is happening at either end of the extent
* c> Splits in three extents: Somone is splitting in middle of the extent
*
*/
static int ext4_split_extent(handle_t *handle,
struct inode *inode,
struct ext4_ext_path **ppath,
struct ext4_map_blocks *map,
int split_flag,
int flags)
{
struct ext4_ext_path *path = *ppath;
ext4_lblk_t ee_block;
struct ext4_extent *ex;
unsigned int ee_len, depth;
int err = 0;
int unwritten;
int split_flag1, flags1;
int allocated = map->m_len;
depth = ext_depth(inode);
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
unwritten = ext4_ext_is_unwritten(ex);
if (map->m_lblk + map->m_len < ee_block + ee_len) {
split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT;
flags1 = flags | EXT4_GET_BLOCKS_PRE_IO;
if (unwritten)
split_flag1 |= EXT4_EXT_MARK_UNWRIT1 |
EXT4_EXT_MARK_UNWRIT2;
if (split_flag & EXT4_EXT_DATA_VALID2)
split_flag1 |= EXT4_EXT_DATA_VALID1;
err = ext4_split_extent_at(handle, inode, ppath,
map->m_lblk + map->m_len, split_flag1, flags1);
if (err)
goto out;
} else {
allocated = ee_len - (map->m_lblk - ee_block);
}
/*
* Update path is required because previous ext4_split_extent_at() may
* result in split of original leaf or extent zeroout.
*/
path = ext4_find_extent(inode, map->m_lblk, ppath, 0);
if (IS_ERR(path))
return PTR_ERR(path);
depth = ext_depth(inode);
ex = path[depth].p_ext;
if (!ex) {
EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
(unsigned long) map->m_lblk);
return -EFSCORRUPTED;
}
unwritten = ext4_ext_is_unwritten(ex);
split_flag1 = 0;
if (map->m_lblk >= ee_block) {
split_flag1 = split_flag & EXT4_EXT_DATA_VALID2;
if (unwritten) {
split_flag1 |= EXT4_EXT_MARK_UNWRIT1;
split_flag1 |= split_flag & (EXT4_EXT_MAY_ZEROOUT |
EXT4_EXT_MARK_UNWRIT2);
}
err = ext4_split_extent_at(handle, inode, ppath,
map->m_lblk, split_flag1, flags);
if (err)
goto out;
}
ext4_ext_show_leaf(inode, path);
out:
return err ? err : allocated;
}
/*
* This function is called by ext4_ext_map_blocks() if someone tries to write
* to an unwritten extent. It may result in splitting the unwritten
* extent into multiple extents (up to three - one initialized and two
* unwritten).
* There are three possibilities:
* a> There is no split required: Entire extent should be initialized
* b> Splits in two extents: Write is happening at either end of the extent
* c> Splits in three extents: Somone is writing in middle of the extent
*
* Pre-conditions:
* - The extent pointed to by 'path' is unwritten.
* - The extent pointed to by 'path' contains a superset
* of the logical span [map->m_lblk, map->m_lblk + map->m_len).
*
* Post-conditions on success:
* - the returned value is the number of blocks beyond map->l_lblk
* that are allocated and initialized.
* It is guaranteed to be >= map->m_len.
*/
static int ext4_ext_convert_to_initialized(handle_t *handle,
struct inode *inode,
struct ext4_map_blocks *map,
struct ext4_ext_path **ppath,
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
int flags)
{
struct ext4_ext_path *path = *ppath;
struct ext4_sb_info *sbi;
struct ext4_extent_header *eh;
struct ext4_map_blocks split_map;
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
struct ext4_extent zero_ex1, zero_ex2;
struct ext4_extent *ex, *abut_ex;
ext4_lblk_t ee_block, eof_block;
unsigned int ee_len, depth, map_len = map->m_len;
int allocated = 0, max_zeroout = 0;
int err = 0;
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
int split_flag = EXT4_EXT_DATA_VALID2;
ext_debug("ext4_ext_convert_to_initialized: inode %lu, logical"
"block %llu, max_blocks %u\n", inode->i_ino,
(unsigned long long)map->m_lblk, map_len);
sbi = EXT4_SB(inode->i_sb);
eof_block = (inode->i_size + inode->i_sb->s_blocksize - 1) >>
inode->i_sb->s_blocksize_bits;
if (eof_block < map->m_lblk + map_len)
eof_block = map->m_lblk + map_len;
depth = ext_depth(inode);
eh = path[depth].p_hdr;
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
zero_ex1.ee_len = 0;
zero_ex2.ee_len = 0;
trace_ext4_ext_convert_to_initialized_enter(inode, map, ex);
/* Pre-conditions */
BUG_ON(!ext4_ext_is_unwritten(ex));
BUG_ON(!in_range(map->m_lblk, ee_block, ee_len));
/*
* Attempt to transfer newly initialized blocks from the currently
* unwritten extent to its neighbor. This is much cheaper
* than an insertion followed by a merge as those involve costly
* memmove() calls. Transferring to the left is the common case in
* steady state for workloads doing fallocate(FALLOC_FL_KEEP_SIZE)
* followed by append writes.
*
* Limitations of the current logic:
* - L1: we do not deal with writes covering the whole extent.
* This would require removing the extent if the transfer
* is possible.
* - L2: we only attempt to merge with an extent stored in the
* same extent tree node.
*/
if ((map->m_lblk == ee_block) &&
/* See if we can merge left */
(map_len < ee_len) && /*L1*/
(ex > EXT_FIRST_EXTENT(eh))) { /*L2*/
ext4_lblk_t prev_lblk;
ext4_fsblk_t prev_pblk, ee_pblk;
unsigned int prev_len;
abut_ex = ex - 1;
prev_lblk = le32_to_cpu(abut_ex->ee_block);
prev_len = ext4_ext_get_actual_len(abut_ex);
prev_pblk = ext4_ext_pblock(abut_ex);
ee_pblk = ext4_ext_pblock(ex);
/*
* A transfer of blocks from 'ex' to 'abut_ex' is allowed
* upon those conditions:
* - C1: abut_ex is initialized,
* - C2: abut_ex is logically abutting ex,
* - C3: abut_ex is physically abutting ex,
* - C4: abut_ex can receive the additional blocks without
* overflowing the (initialized) length limit.
*/
if ((!ext4_ext_is_unwritten(abut_ex)) && /*C1*/
((prev_lblk + prev_len) == ee_block) && /*C2*/
((prev_pblk + prev_len) == ee_pblk) && /*C3*/
(prev_len < (EXT_INIT_MAX_LEN - map_len))) { /*C4*/
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto out;
trace_ext4_ext_convert_to_initialized_fastpath(inode,
map, ex, abut_ex);
/* Shift the start of ex by 'map_len' blocks */
ex->ee_block = cpu_to_le32(ee_block + map_len);
ext4_ext_store_pblock(ex, ee_pblk + map_len);
ex->ee_len = cpu_to_le16(ee_len - map_len);
ext4_ext_mark_unwritten(ex); /* Restore the flag */
/* Extend abut_ex by 'map_len' blocks */
abut_ex->ee_len = cpu_to_le16(prev_len + map_len);
/* Result: number of initialized blocks past m_lblk */
allocated = map_len;
}
} else if (((map->m_lblk + map_len) == (ee_block + ee_len)) &&
(map_len < ee_len) && /*L1*/
ex < EXT_LAST_EXTENT(eh)) { /*L2*/
/* See if we can merge right */
ext4_lblk_t next_lblk;
ext4_fsblk_t next_pblk, ee_pblk;
unsigned int next_len;
abut_ex = ex + 1;
next_lblk = le32_to_cpu(abut_ex->ee_block);
next_len = ext4_ext_get_actual_len(abut_ex);
next_pblk = ext4_ext_pblock(abut_ex);
ee_pblk = ext4_ext_pblock(ex);
/*
* A transfer of blocks from 'ex' to 'abut_ex' is allowed
* upon those conditions:
* - C1: abut_ex is initialized,
* - C2: abut_ex is logically abutting ex,
* - C3: abut_ex is physically abutting ex,
* - C4: abut_ex can receive the additional blocks without
* overflowing the (initialized) length limit.
*/
if ((!ext4_ext_is_unwritten(abut_ex)) && /*C1*/
((map->m_lblk + map_len) == next_lblk) && /*C2*/
((ee_pblk + ee_len) == next_pblk) && /*C3*/
(next_len < (EXT_INIT_MAX_LEN - map_len))) { /*C4*/
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto out;
trace_ext4_ext_convert_to_initialized_fastpath(inode,
map, ex, abut_ex);
/* Shift the start of abut_ex by 'map_len' blocks */
abut_ex->ee_block = cpu_to_le32(next_lblk - map_len);
ext4_ext_store_pblock(abut_ex, next_pblk - map_len);
ex->ee_len = cpu_to_le16(ee_len - map_len);
ext4_ext_mark_unwritten(ex); /* Restore the flag */
/* Extend abut_ex by 'map_len' blocks */
abut_ex->ee_len = cpu_to_le16(next_len + map_len);
/* Result: number of initialized blocks past m_lblk */
allocated = map_len;
}
}
if (allocated) {
/* Mark the block containing both extents as dirty */
ext4_ext_dirty(handle, inode, path + depth);
/* Update path to point to the right extent */
path[depth].p_ext = abut_ex;
goto out;
} else
allocated = ee_len - (map->m_lblk - ee_block);
WARN_ON(map->m_lblk < ee_block);
/*
* It is safe to convert extent to initialized via explicit
* zeroout only if extent is fully inside i_size or new_size.
*/
split_flag |= ee_block + ee_len <= eof_block ? EXT4_EXT_MAY_ZEROOUT : 0;
if (EXT4_EXT_MAY_ZEROOUT & split_flag)
max_zeroout = sbi->s_extent_max_zeroout_kb >>
(inode->i_sb->s_blocksize_bits - 10);
/*
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
* five cases:
* 1. split the extent into three extents.
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
* 2. split the extent into two extents, zeroout the head of the first
* extent.
* 3. split the extent into two extents, zeroout the tail of the second
* extent.
* 4. split the extent into two extents with out zeroout.
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
* 5. no splitting needed, just possibly zeroout the head and / or the
* tail of the extent.
*/
split_map.m_lblk = map->m_lblk;
split_map.m_len = map->m_len;
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
if (max_zeroout && (allocated > split_map.m_len)) {
if (allocated <= max_zeroout) {
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
/* case 3 or 5 */
zero_ex1.ee_block =
cpu_to_le32(split_map.m_lblk +
split_map.m_len);
zero_ex1.ee_len =
cpu_to_le16(allocated - split_map.m_len);
ext4_ext_store_pblock(&zero_ex1,
ext4_ext_pblock(ex) + split_map.m_lblk +
split_map.m_len - ee_block);
err = ext4_ext_zeroout(inode, &zero_ex1);
if (err)
goto out;
split_map.m_len = allocated;
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
}
if (split_map.m_lblk - ee_block + split_map.m_len <
max_zeroout) {
/* case 2 or 5 */
if (split_map.m_lblk != ee_block) {
zero_ex2.ee_block = ex->ee_block;
zero_ex2.ee_len = cpu_to_le16(split_map.m_lblk -
ee_block);
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
ext4_ext_store_pblock(&zero_ex2,
ext4_ext_pblock(ex));
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
err = ext4_ext_zeroout(inode, &zero_ex2);
if (err)
goto out;
}
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
split_map.m_len += split_map.m_lblk - ee_block;
split_map.m_lblk = ee_block;
allocated = map->m_len;
}
}
err = ext4_split_extent(handle, inode, ppath, &split_map, split_flag,
flags);
if (err > 0)
err = 0;
out:
/* If we have gotten a failure, don't zero out status tree */
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f881952c32b31bc4e433768f18489f79ec9 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-26 21:40:52 +00:00
if (!err) {
err = ext4_zeroout_es(inode, &zero_ex1);
if (!err)
err = ext4_zeroout_es(inode, &zero_ex2);
}
return err ? err : allocated;
}
/*
* This function is called by ext4_ext_map_blocks() from
* ext4_get_blocks_dio_write() when DIO to write
* to an unwritten extent.
*
* Writing to an unwritten extent may result in splitting the unwritten
* extent into multiple initialized/unwritten extents (up to three)
* There are three possibilities:
* a> There is no split required: Entire extent should be unwritten
* b> Splits in two extents: Write is happening at either end of the extent
* c> Splits in three extents: Somone is writing in middle of the extent
*
* This works the same way in the case of initialized -> unwritten conversion.
*
* One of more index blocks maybe needed if the extent tree grow after
* the unwritten extent split. To prevent ENOSPC occur at the IO
* complete, we need to split the unwritten extent before DIO submit
* the IO. The unwritten extent called at this time will be split
* into three unwritten extent(at most). After IO complete, the part
* being filled will be convert to initialized by the end_io callback function
* via ext4_convert_unwritten_extents().
*
* Returns the size of unwritten extent to be written on success.
*/
static int ext4_split_convert_extents(handle_t *handle,
struct inode *inode,
struct ext4_map_blocks *map,
struct ext4_ext_path **ppath,
int flags)
{
struct ext4_ext_path *path = *ppath;
ext4_lblk_t eof_block;
ext4_lblk_t ee_block;
struct ext4_extent *ex;
unsigned int ee_len;
int split_flag = 0, depth;
ext_debug("%s: inode %lu, logical block %llu, max_blocks %u\n",
__func__, inode->i_ino,
(unsigned long long)map->m_lblk, map->m_len);
eof_block = (inode->i_size + inode->i_sb->s_blocksize - 1) >>
inode->i_sb->s_blocksize_bits;
if (eof_block < map->m_lblk + map->m_len)
eof_block = map->m_lblk + map->m_len;
/*
* It is safe to convert extent to initialized via explicit
* zeroout only if extent is fully insde i_size or new_size.
*/
depth = ext_depth(inode);
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
/* Convert to unwritten */
if (flags & EXT4_GET_BLOCKS_CONVERT_UNWRITTEN) {
split_flag |= EXT4_EXT_DATA_VALID1;
/* Convert to initialized */
} else if (flags & EXT4_GET_BLOCKS_CONVERT) {
split_flag |= ee_block + ee_len <= eof_block ?
EXT4_EXT_MAY_ZEROOUT : 0;
split_flag |= (EXT4_EXT_MARK_UNWRIT2 | EXT4_EXT_DATA_VALID2);
}
flags |= EXT4_GET_BLOCKS_PRE_IO;
return ext4_split_extent(handle, inode, ppath, map, split_flag, flags);
}
static int ext4_convert_unwritten_extents_endio(handle_t *handle,
struct inode *inode,
struct ext4_map_blocks *map,
struct ext4_ext_path **ppath)
{
struct ext4_ext_path *path = *ppath;
struct ext4_extent *ex;
ext4_lblk_t ee_block;
unsigned int ee_len;
int depth;
int err = 0;
depth = ext_depth(inode);
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
ext_debug("ext4_convert_unwritten_extents_endio: inode %lu, logical"
"block %llu, max_blocks %u\n", inode->i_ino,
(unsigned long long)ee_block, ee_len);
/* If extent is larger than requested it is a clear sign that we still
* have some extent state machine issues left. So extent_split is still
* required.
* TODO: Once all related issues will be fixed this situation should be
* illegal.
*/
if (ee_block != map->m_lblk || ee_len > map->m_len) {
#ifdef CONFIG_EXT4_DEBUG
ext4_warning(inode->i_sb, "Inode (%ld) finished: extent logical block %llu,"
" len %u; IO logical block %llu, len %u",
inode->i_ino, (unsigned long long)ee_block, ee_len,
(unsigned long long)map->m_lblk, map->m_len);
#endif
err = ext4_split_convert_extents(handle, inode, map, ppath,
EXT4_GET_BLOCKS_CONVERT);
if (err < 0)
return err;
path = ext4_find_extent(inode, map->m_lblk, ppath, 0);
if (IS_ERR(path))
return PTR_ERR(path);
depth = ext_depth(inode);
ex = path[depth].p_ext;
}
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
goto out;
/* first mark the extent as initialized */
ext4_ext_mark_initialized(ex);
/* note: ext4_ext_correct_indexes() isn't needed here because
* borders are not changed
*/
ext4_ext_try_to_merge(handle, inode, path, ex);
/* Mark modified extent as dirty */
err = ext4_ext_dirty(handle, inode, path + path->p_depth);
out:
ext4_ext_show_leaf(inode, path);
return err;
}
static int
convert_initialized_extent(handle_t *handle, struct inode *inode,
struct ext4_map_blocks *map,
struct ext4_ext_path **ppath,
unsigned int *allocated)
{
struct ext4_ext_path *path = *ppath;
struct ext4_extent *ex;
ext4_lblk_t ee_block;
unsigned int ee_len;
int depth;
int err = 0;
/*
* Make sure that the extent is no bigger than we support with
* unwritten extent
*/
if (map->m_len > EXT_UNWRITTEN_MAX_LEN)
map->m_len = EXT_UNWRITTEN_MAX_LEN / 2;
depth = ext_depth(inode);
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
ext_debug("%s: inode %lu, logical"
"block %llu, max_blocks %u\n", __func__, inode->i_ino,
(unsigned long long)ee_block, ee_len);
if (ee_block != map->m_lblk || ee_len > map->m_len) {
err = ext4_split_convert_extents(handle, inode, map, ppath,
EXT4_GET_BLOCKS_CONVERT_UNWRITTEN);
if (err < 0)
return err;
path = ext4_find_extent(inode, map->m_lblk, ppath, 0);
if (IS_ERR(path))
return PTR_ERR(path);
depth = ext_depth(inode);
ex = path[depth].p_ext;
if (!ex) {
EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
(unsigned long) map->m_lblk);
return -EFSCORRUPTED;
}
}
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
return err;
/* first mark the extent as unwritten */
ext4_ext_mark_unwritten(ex);
/* note: ext4_ext_correct_indexes() isn't needed here because
* borders are not changed
*/
ext4_ext_try_to_merge(handle, inode, path, ex);
/* Mark modified extent as dirty */
err = ext4_ext_dirty(handle, inode, path + path->p_depth);
if (err)
return err;
ext4_ext_show_leaf(inode, path);
ext4_update_inode_fsync_trans(handle, inode, 1);
ext4: remove EXT4_EOFBLOCKS_FL and associated code The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file contains unwritten blocks past i_size. It's set when ext4_fallocate is called with the KEEP_SIZE flag to extend a file with an unwritten extent. However, this flag hasn't been useful functionally since March, 2012, when a decision was made to remove it from ext4. All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version 1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag handling") at that time. Now that enough time has passed to make e2fsprogs versions containing this modification common, this patch now removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as well. This change has two implications. First, because pre-1.42.2 e2fsck versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and because that bit will never be set by newer kernels containing this patch, old versions of e2fsck won't have a compatibility problem with files created by newer kernels. Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits belonging to a file written by an older kernel. If set, it will remain in that state until the file is deleted. Because e2fsck versions since 1.42.2 don't check the flag at all, no adverse effect is expected. However, pre-1.42.2 e2fsck versions that do check the flag may report that it is set when it ought not to be after a file has been truncated or had its unwritten blocks written. In this case, the old version of e2fsck will offer to clear the flag. No adverse effect would then occur whether the user chooses to clear the flag or not. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-11 21:02:16 +00:00
map->m_flags |= EXT4_MAP_UNWRITTEN;
if (*allocated > map->m_len)
*allocated = map->m_len;
map->m_len = *allocated;
return 0;
}
static int
ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
struct ext4_map_blocks *map,
struct ext4_ext_path **ppath, int flags,
unsigned int allocated, ext4_fsblk_t newblock)
{
ext4: remove EXT4_EOFBLOCKS_FL and associated code The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file contains unwritten blocks past i_size. It's set when ext4_fallocate is called with the KEEP_SIZE flag to extend a file with an unwritten extent. However, this flag hasn't been useful functionally since March, 2012, when a decision was made to remove it from ext4. All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version 1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag handling") at that time. Now that enough time has passed to make e2fsprogs versions containing this modification common, this patch now removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as well. This change has two implications. First, because pre-1.42.2 e2fsck versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and because that bit will never be set by newer kernels containing this patch, old versions of e2fsck won't have a compatibility problem with files created by newer kernels. Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits belonging to a file written by an older kernel. If set, it will remain in that state until the file is deleted. Because e2fsck versions since 1.42.2 don't check the flag at all, no adverse effect is expected. However, pre-1.42.2 e2fsck versions that do check the flag may report that it is set when it ought not to be after a file has been truncated or had its unwritten blocks written. In this case, the old version of e2fsck will offer to clear the flag. No adverse effect would then occur whether the user chooses to clear the flag or not. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-11 21:02:16 +00:00
#ifdef EXT_DEBUG
struct ext4_ext_path *path = *ppath;
ext4: remove EXT4_EOFBLOCKS_FL and associated code The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file contains unwritten blocks past i_size. It's set when ext4_fallocate is called with the KEEP_SIZE flag to extend a file with an unwritten extent. However, this flag hasn't been useful functionally since March, 2012, when a decision was made to remove it from ext4. All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version 1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag handling") at that time. Now that enough time has passed to make e2fsprogs versions containing this modification common, this patch now removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as well. This change has two implications. First, because pre-1.42.2 e2fsck versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and because that bit will never be set by newer kernels containing this patch, old versions of e2fsck won't have a compatibility problem with files created by newer kernels. Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits belonging to a file written by an older kernel. If set, it will remain in that state until the file is deleted. Because e2fsck versions since 1.42.2 don't check the flag at all, no adverse effect is expected. However, pre-1.42.2 e2fsck versions that do check the flag may report that it is set when it ought not to be after a file has been truncated or had its unwritten blocks written. In this case, the old version of e2fsck will offer to clear the flag. No adverse effect would then occur whether the user chooses to clear the flag or not. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-11 21:02:16 +00:00
#endif
int ret = 0;
int err = 0;
ext_debug("ext4_ext_handle_unwritten_extents: inode %lu, logical "
"block %llu, max_blocks %u, flags %x, allocated %u\n",
inode->i_ino, (unsigned long long)map->m_lblk, map->m_len,
flags, allocated);
ext4_ext_show_leaf(inode, path);
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
/*
* When writing into unwritten space, we should not fail to
ext4: introduce reserved space Currently in ENOSPC condition when writing into unwritten space, or punching a hole, we might need to split the extent and grow extent tree. However since we can not allocate any new metadata blocks we'll have to zero out unwritten part of extent or punched out part of extent, or in the worst case return ENOSPC even though use actually does not allocate any space. Also in delalloc path we do reserve metadata and data blocks for the time we're going to write out, however metadata block reservation is very tricky especially since we expect that logical connectivity implies physical connectivity, however that might not be the case and hence we might end up allocating more metadata blocks than previously reserved. So in future, metadata reservation checks should be removed since we can not assure that we do not under reserve. And this is where reserved space comes into the picture. When mounting the file system we slice off a little bit of the file system space (2% or 4096 clusters, whichever is smaller) which can be then used for the cases mentioned above to prevent costly zeroout, or unexpected ENOSPC. The number of reserved clusters can be set via sysfs, however it can never be bigger than number of free clusters in the file system. Note that this patch fixes the failure of xfstest 274 as expected. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-04-10 02:11:22 +00:00
* allocate metadata blocks for the new extent block if needed.
*/
flags |= EXT4_GET_BLOCKS_METADATA_NOFAIL;
trace_ext4_ext_handle_unwritten_extents(inode, map, flags,
allocated, newblock);
/* get_block() before submit the IO, split the extent */
if (flags & EXT4_GET_BLOCKS_PRE_IO) {
ret = ext4_split_convert_extents(handle, inode, map, ppath,
flags | EXT4_GET_BLOCKS_CONVERT);
if (ret <= 0)
goto out;
map->m_flags |= EXT4_MAP_UNWRITTEN;
goto out;
}
/* IO end_io complete, convert the filled extent to written */
if (flags & EXT4_GET_BLOCKS_CONVERT) {
if (flags & EXT4_GET_BLOCKS_ZERO) {
if (allocated > map->m_len)
allocated = map->m_len;
err = ext4_issue_zeroout(inode, map->m_lblk, newblock,
allocated);
if (err < 0)
goto out2;
}
ret = ext4_convert_unwritten_extents_endio(handle, inode, map,
ppath);
ext4: remove EXT4_EOFBLOCKS_FL and associated code The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file contains unwritten blocks past i_size. It's set when ext4_fallocate is called with the KEEP_SIZE flag to extend a file with an unwritten extent. However, this flag hasn't been useful functionally since March, 2012, when a decision was made to remove it from ext4. All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version 1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag handling") at that time. Now that enough time has passed to make e2fsprogs versions containing this modification common, this patch now removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as well. This change has two implications. First, because pre-1.42.2 e2fsck versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and because that bit will never be set by newer kernels containing this patch, old versions of e2fsck won't have a compatibility problem with files created by newer kernels. Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits belonging to a file written by an older kernel. If set, it will remain in that state until the file is deleted. Because e2fsck versions since 1.42.2 don't check the flag at all, no adverse effect is expected. However, pre-1.42.2 e2fsck versions that do check the flag may report that it is set when it ought not to be after a file has been truncated or had its unwritten blocks written. In this case, the old version of e2fsck will offer to clear the flag. No adverse effect would then occur whether the user chooses to clear the flag or not. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-11 21:02:16 +00:00
if (ret >= 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
ext4: remove EXT4_EOFBLOCKS_FL and associated code The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file contains unwritten blocks past i_size. It's set when ext4_fallocate is called with the KEEP_SIZE flag to extend a file with an unwritten extent. However, this flag hasn't been useful functionally since March, 2012, when a decision was made to remove it from ext4. All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version 1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag handling") at that time. Now that enough time has passed to make e2fsprogs versions containing this modification common, this patch now removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as well. This change has two implications. First, because pre-1.42.2 e2fsck versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and because that bit will never be set by newer kernels containing this patch, old versions of e2fsck won't have a compatibility problem with files created by newer kernels. Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits belonging to a file written by an older kernel. If set, it will remain in that state until the file is deleted. Because e2fsck versions since 1.42.2 don't check the flag at all, no adverse effect is expected. However, pre-1.42.2 e2fsck versions that do check the flag may report that it is set when it ought not to be after a file has been truncated or had its unwritten blocks written. In this case, the old version of e2fsck will offer to clear the flag. No adverse effect would then occur whether the user chooses to clear the flag or not. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-11 21:02:16 +00:00
else
err = ret;
map->m_flags |= EXT4_MAP_MAPPED;
ext4: fix xfstest generic/299 block validity failures Commit a115f749c1 (ext4: remove wait for unwritten extent conversion from ext4_truncate) exposed a bug in ext4_ext_handle_uninitialized_extents(). It can be triggered by xfstest generic/299 when run on a test file system created without a journal. This test continuously fallocates and truncates files to which random dio/aio writes are simultaneously performed by a separate process. The test completes successfully, but if the test filesystem is mounted with the block_validity option, a warning message stating that a logical block has been mapped to an illegal physical block is posted in the kernel log. The bug occurs when an extent is being converted to the written state by ext4_end_io_dio() and ext4_ext_handle_uninitialized_extents() discovers a mapping for an existing uninitialized extent. Although it sets EXT4_MAP_MAPPED in map->m_flags, it fails to set map->m_pblk to the discovered physical block number. Because map->m_pblk is not otherwise initialized or set by this function or its callers, its uninitialized value is returned to ext4_map_blocks(), where it is stored as a bogus mapping in the extent status tree. Since map->m_pblk can accidentally contain illegal values that are larger than the physical size of the file system, calls to check_block_validity() in ext4_map_blocks() that are enabled if the block_validity mount option is used can fail, resulting in the logged warning message. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org # 3.11+
2014-02-12 15:42:45 +00:00
map->m_pblk = newblock;
if (allocated > map->m_len)
allocated = map->m_len;
map->m_len = allocated;
goto out2;
}
/* buffered IO case */
/*
* repeat fallocate creation request
* we already have an unwritten extent
*/
if (flags & EXT4_GET_BLOCKS_UNWRIT_EXT) {
map->m_flags |= EXT4_MAP_UNWRITTEN;
goto map_out;
}
/* buffered READ or buffered write_begin() lookup */
if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
/*
* We have blocks reserved already. We
* return allocated blocks so that delalloc
* won't do block reservation for us. But
* the buffer head will be unmapped so that
* a read from the block returns 0s.
*/
map->m_flags |= EXT4_MAP_UNWRITTEN;
goto out1;
}
/* buffered write, writepage time, convert*/
ret = ext4_ext_convert_to_initialized(handle, inode, map, ppath, flags);
if (ret >= 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
out:
if (ret <= 0) {
err = ret;
goto out2;
} else
allocated = ret;
map->m_flags |= EXT4_MAP_NEW;
if (allocated > map->m_len)
allocated = map->m_len;
map->m_len = allocated;
map_out:
map->m_flags |= EXT4_MAP_MAPPED;
out1:
if (allocated > map->m_len)
allocated = map->m_len;
ext4_ext_show_leaf(inode, path);
map->m_pblk = newblock;
map->m_len = allocated;
out2:
return err ? err : allocated;
}
/*
* get_implied_cluster_alloc - check to see if the requested
* allocation (in the map structure) overlaps with a cluster already
* allocated in an extent.
* @sb The filesystem superblock structure
* @map The requested lblk->pblk mapping
* @ex The extent structure which might contain an implied
* cluster allocation
*
* This function is called by ext4_ext_map_blocks() after we failed to
* find blocks that were already in the inode's extent tree. Hence,
* we know that the beginning of the requested region cannot overlap
* the extent from the inode's extent tree. There are three cases we
* want to catch. The first is this case:
*
* |--- cluster # N--|
* |--- extent ---| |---- requested region ---|
* |==========|
*
* The second case that we need to test for is this one:
*
* |--------- cluster # N ----------------|
* |--- requested region --| |------- extent ----|
* |=======================|
*
* The third case is when the requested region lies between two extents
* within the same cluster:
* |------------- cluster # N-------------|
* |----- ex -----| |---- ex_right ----|
* |------ requested region ------|
* |================|
*
* In each of the above cases, we need to set the map->m_pblk and
* map->m_len so it corresponds to the return the extent labelled as
* "|====|" from cluster #N, since it is already in use for data in
* cluster EXT4_B2C(sbi, map->m_lblk). We will then return 1 to
* signal to ext4_ext_map_blocks() that map->m_pblk should be treated
* as a new "allocated" block region. Otherwise, we will return 0 and
* ext4_ext_map_blocks() will then allocate one or more new clusters
* by calling ext4_mb_new_blocks().
*/
static int get_implied_cluster_alloc(struct super_block *sb,
struct ext4_map_blocks *map,
struct ext4_extent *ex,
struct ext4_ext_path *path)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4_lblk_t c_offset = EXT4_LBLK_COFF(sbi, map->m_lblk);
ext4_lblk_t ex_cluster_start, ex_cluster_end;
ext4_lblk_t rr_cluster_start;
ext4_lblk_t ee_block = le32_to_cpu(ex->ee_block);
ext4_fsblk_t ee_start = ext4_ext_pblock(ex);
unsigned short ee_len = ext4_ext_get_actual_len(ex);
/* The extent passed in that we are trying to match */
ex_cluster_start = EXT4_B2C(sbi, ee_block);
ex_cluster_end = EXT4_B2C(sbi, ee_block + ee_len - 1);
/* The requested region passed into ext4_map_blocks() */
rr_cluster_start = EXT4_B2C(sbi, map->m_lblk);
if ((rr_cluster_start == ex_cluster_end) ||
(rr_cluster_start == ex_cluster_start)) {
if (rr_cluster_start == ex_cluster_end)
ee_start += ee_len - 1;
map->m_pblk = EXT4_PBLK_CMASK(sbi, ee_start) + c_offset;
map->m_len = min(map->m_len,
(unsigned) sbi->s_cluster_ratio - c_offset);
/*
* Check for and handle this case:
*
* |--------- cluster # N-------------|
* |------- extent ----|
* |--- requested region ---|
* |===========|
*/
if (map->m_lblk < ee_block)
map->m_len = min(map->m_len, ee_block - map->m_lblk);
/*
* Check for the case where there is already another allocated
* block to the right of 'ex' but before the end of the cluster.
*
* |------------- cluster # N-------------|
* |----- ex -----| |---- ex_right ----|
* |------ requested region ------|
* |================|
*/
if (map->m_lblk > ee_block) {
ext4_lblk_t next = ext4_ext_next_allocated_block(path);
map->m_len = min(map->m_len, next - map->m_lblk);
}
trace_ext4_get_implied_cluster_alloc_exit(sb, map, 1);
return 1;
}
trace_ext4_get_implied_cluster_alloc_exit(sb, map, 0);
return 0;
}
/*
* Block allocation/map/preallocation routine for extents based files
*
*
* Need to be called with
* down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system block
* (ie, create is zero). Otherwise down_write(&EXT4_I(inode)->i_data_sem)
*
* return > 0, number of of blocks already mapped/allocated
* if create == 0 and these are pre-allocated blocks
* buffer head is unmapped
* otherwise blocks are mapped
*
* return = 0, if plain look up failed (blocks have not been allocated)
* buffer head is unmapped
*
* return < 0, error case.
*/
int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
struct ext4_map_blocks *map, int flags)
{
struct ext4_ext_path *path = NULL;
struct ext4_extent newex, *ex, *ex2;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
ext4_fsblk_t newblock = 0;
int err = 0, depth, ret;
unsigned int allocated = 0, offset = 0;
unsigned int allocated_clusters = 0;
struct ext4_allocation_request ar;
ext4_lblk_t cluster_offset;
ext_debug("blocks %u/%u requested for inode %lu\n",
map->m_lblk, map->m_len, inode->i_ino);
trace_ext4_ext_map_blocks_enter(inode, map->m_lblk, map->m_len, flags);
/* find extent for this block */
path = ext4_find_extent(inode, map->m_lblk, NULL, 0);
if (IS_ERR(path)) {
err = PTR_ERR(path);
path = NULL;
goto out2;
}
depth = ext_depth(inode);
/*
* consistent leaf must not be empty;
* this situation is possible, though, _during_ tree modification;
* this is why assert can't be put in ext4_find_extent()
*/
if (unlikely(path[depth].p_ext == NULL && depth != 0)) {
EXT4_ERROR_INODE(inode, "bad extent address "
"lblock: %lu, depth: %d pblock %lld",
(unsigned long) map->m_lblk, depth,
path[depth].p_block);
err = -EFSCORRUPTED;
goto out2;
}
ex = path[depth].p_ext;
if (ex) {
ext4_lblk_t ee_block = le32_to_cpu(ex->ee_block);
ext4_fsblk_t ee_start = ext4_ext_pblock(ex);
unsigned short ee_len;
/*
* unwritten extents are treated as holes, except that
* we split out initialized portions during a write.
*/
ee_len = ext4_ext_get_actual_len(ex);
trace_ext4_ext_show_extent(inode, ee_block, ee_start, ee_len);
/* if found extent covers block, simply return it */
if (in_range(map->m_lblk, ee_block, ee_len)) {
newblock = map->m_lblk - ee_block + ee_start;
/* number of remaining blocks in the extent */
allocated = ee_len - (map->m_lblk - ee_block);
ext_debug("%u fit into %u:%d -> %llu\n", map->m_lblk,
ee_block, ee_len, newblock);
/*
* If the extent is initialized check whether the
* caller wants to convert it to unwritten.
*/
if ((!ext4_ext_is_unwritten(ex)) &&
(flags & EXT4_GET_BLOCKS_CONVERT_UNWRITTEN)) {
err = convert_initialized_extent(handle,
inode, map, &path, &allocated);
goto out2;
} else if (!ext4_ext_is_unwritten(ex)) {
goto out;
}
ret = ext4_ext_handle_unwritten_extents(
handle, inode, map, &path, flags,
allocated, newblock);
if (ret < 0)
err = ret;
else
allocated = ret;
goto out2;
}
}
/*
* requested block isn't allocated yet;
* we couldn't try to create block if create flag is zero
*/
if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
ext4_lblk_t hole_start, hole_len;
hole_start = map->m_lblk;
hole_len = ext4_ext_determine_hole(inode, path, &hole_start);
/*
* put just found gap into cache to speed up
* subsequent requests
*/
ext4_ext_put_gap_in_cache(inode, hole_start, hole_len);
/* Update hole_len to reflect hole size after map->m_lblk */
if (hole_start != map->m_lblk)
hole_len -= map->m_lblk - hole_start;
map->m_pblk = 0;
map->m_len = min_t(unsigned int, map->m_len, hole_len);
goto out2;
}
/*
* Okay, we need to do block allocation.
*/
newex.ee_block = cpu_to_le32(map->m_lblk);
cluster_offset = EXT4_LBLK_COFF(sbi, map->m_lblk);
/*
* If we are doing bigalloc, check to see if the extent returned
* by ext4_find_extent() implies a cluster we can use.
*/
if (cluster_offset && ex &&
get_implied_cluster_alloc(inode->i_sb, map, ex, path)) {
ar.len = allocated = map->m_len;
newblock = map->m_pblk;
goto got_allocated_blocks;
}
/* find neighbour allocated blocks */
ar.lleft = map->m_lblk;
err = ext4_ext_search_left(inode, path, &ar.lleft, &ar.pleft);
if (err)
goto out2;
ar.lright = map->m_lblk;
ex2 = NULL;
err = ext4_ext_search_right(inode, path, &ar.lright, &ar.pright, &ex2);
if (err)
goto out2;
/* Check if the extent after searching to the right implies a
* cluster we can use. */
if ((sbi->s_cluster_ratio > 1) && ex2 &&
get_implied_cluster_alloc(inode->i_sb, map, ex2, path)) {
ar.len = allocated = map->m_len;
newblock = map->m_pblk;
goto got_allocated_blocks;
}
/*
* See if request is beyond maximum number of blocks we can have in
* a single extent. For an initialized extent this limit is
* EXT_INIT_MAX_LEN and for an unwritten extent this limit is
* EXT_UNWRITTEN_MAX_LEN.
*/
if (map->m_len > EXT_INIT_MAX_LEN &&
!(flags & EXT4_GET_BLOCKS_UNWRIT_EXT))
map->m_len = EXT_INIT_MAX_LEN;
else if (map->m_len > EXT_UNWRITTEN_MAX_LEN &&
(flags & EXT4_GET_BLOCKS_UNWRIT_EXT))
map->m_len = EXT_UNWRITTEN_MAX_LEN;
/* Check if we can really insert (m_lblk)::(m_lblk + m_len) extent */
newex.ee_len = cpu_to_le16(map->m_len);
err = ext4_ext_check_overlap(sbi, inode, &newex, path);
if (err)
allocated = ext4_ext_get_actual_len(&newex);
else
allocated = map->m_len;
/* allocate new block */
ar.inode = inode;
ar.goal = ext4_ext_find_goal(inode, path, map->m_lblk);
ar.logical = map->m_lblk;
/*
* We calculate the offset from the beginning of the cluster
* for the logical block number, since when we allocate a
* physical cluster, the physical block should start at the
* same offset from the beginning of the cluster. This is
* needed so that future calls to get_implied_cluster_alloc()
* work correctly.
*/
offset = EXT4_LBLK_COFF(sbi, map->m_lblk);
ar.len = EXT4_NUM_B2C(sbi, offset+allocated);
ar.goal -= offset;
ar.logical -= offset;
if (S_ISREG(inode->i_mode))
ar.flags = EXT4_MB_HINT_DATA;
else
/* disable in-core preallocation for non-regular files */
ar.flags = 0;
if (flags & EXT4_GET_BLOCKS_NO_NORMALIZE)
ar.flags |= EXT4_MB_HINT_NOPREALLOC;
if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
ar.flags |= EXT4_MB_DELALLOC_RESERVED;
if (flags & EXT4_GET_BLOCKS_METADATA_NOFAIL)
ar.flags |= EXT4_MB_USE_RESERVED;
newblock = ext4_mb_new_blocks(handle, &ar, &err);
if (!newblock)
goto out2;
ext_debug("allocate new block: goal %llu, found %llu/%u\n",
ar.goal, newblock, allocated);
allocated_clusters = ar.len;
ar.len = EXT4_C2B(sbi, ar.len) - offset;
if (ar.len > allocated)
ar.len = allocated;
got_allocated_blocks:
/* try to insert new extent into found leaf and return */
ext4_ext_store_pblock(&newex, newblock + offset);
newex.ee_len = cpu_to_le16(ar.len);
/* Mark unwritten */
if (flags & EXT4_GET_BLOCKS_UNWRIT_EXT) {
ext4_ext_mark_unwritten(&newex);
map->m_flags |= EXT4_MAP_UNWRITTEN;
}
ext4: remove EXT4_EOFBLOCKS_FL and associated code The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file contains unwritten blocks past i_size. It's set when ext4_fallocate is called with the KEEP_SIZE flag to extend a file with an unwritten extent. However, this flag hasn't been useful functionally since March, 2012, when a decision was made to remove it from ext4. All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version 1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag handling") at that time. Now that enough time has passed to make e2fsprogs versions containing this modification common, this patch now removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as well. This change has two implications. First, because pre-1.42.2 e2fsck versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and because that bit will never be set by newer kernels containing this patch, old versions of e2fsck won't have a compatibility problem with files created by newer kernels. Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits belonging to a file written by an older kernel. If set, it will remain in that state until the file is deleted. Because e2fsck versions since 1.42.2 don't check the flag at all, no adverse effect is expected. However, pre-1.42.2 e2fsck versions that do check the flag may report that it is set when it ought not to be after a file has been truncated or had its unwritten blocks written. In this case, the old version of e2fsck will offer to clear the flag. No adverse effect would then occur whether the user chooses to clear the flag or not. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-11 21:02:16 +00:00
err = ext4_ext_insert_extent(handle, inode, &path, &newex, flags);
if (err) {
if (allocated_clusters) {
int fb_flags = 0;
/*
* free data blocks we just allocated.
* not a good idea to call discard here directly,
* but otherwise we'd need to call it every free().
*/
ext4_discard_preallocations(inode);
if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
fb_flags = EXT4_FREE_BLOCKS_NO_QUOT_UPDATE;
ext4_free_blocks(handle, inode, NULL, newblock,
EXT4_C2B(sbi, allocated_clusters),
fb_flags);
}
goto out2;
}
/* previous routine could use block we allocated */
newblock = ext4_ext_pblock(&newex);
allocated = ext4_ext_get_actual_len(&newex);
if (allocated > map->m_len)
allocated = map->m_len;
map->m_flags |= EXT4_MAP_NEW;
/*
* Reduce the reserved cluster count to reflect successful deferred
* allocation of delayed allocated clusters or direct allocation of
* clusters discovered to be delayed allocated. Once allocated, a
* cluster is not included in the reserved count.
*/
if (test_opt(inode->i_sb, DELALLOC) && allocated_clusters) {
if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) {
/*
* When allocating delayed allocated clusters, simply
* reduce the reserved cluster count and claim quota
*/
ext4_da_update_reserve_space(inode, allocated_clusters,
1);
} else {
ext4_lblk_t lblk, len;
unsigned int n;
/*
* When allocating non-delayed allocated clusters
* (from fallocate, filemap, DIO, or clusters
* allocated when delalloc has been disabled by
* ext4_nonda_switch), reduce the reserved cluster
* count by the number of allocated clusters that
* have previously been delayed allocated. Quota
* has been claimed by ext4_mb_new_blocks() above,
* so release the quota reservations made for any
* previously delayed allocated clusters.
*/
lblk = EXT4_LBLK_CMASK(sbi, map->m_lblk);
len = allocated_clusters << sbi->s_cluster_bits;
n = ext4_es_delayed_clu(inode, lblk, len);
if (n > 0)
ext4_da_update_reserve_space(inode, (int) n, 0);
}
}
/*
* Cache the extent and update transaction to commit on fdatasync only
* when it is _not_ an unwritten extent.
*/
if ((flags & EXT4_GET_BLOCKS_UNWRIT_EXT) == 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
else
ext4_update_inode_fsync_trans(handle, inode, 0);
out:
if (allocated > map->m_len)
allocated = map->m_len;
ext4_ext_show_leaf(inode, path);
map->m_flags |= EXT4_MAP_MAPPED;
map->m_pblk = newblock;
map->m_len = allocated;
out2:
ext4_ext_drop_refs(path);
kfree(path);
trace_ext4_ext_map_blocks_exit(inode, flags, map,
err ? err : allocated);
return err ? err : allocated;
}
int ext4_ext_truncate(handle_t *handle, struct inode *inode)
{
struct super_block *sb = inode->i_sb;
ext4_lblk_t last_block;
int err = 0;
/*
* TODO: optimization is possible here.
* Probably we need not scan at all,
* because page truncation is enough.
*/
/* we have to know where to truncate from in crash case */
EXT4_I(inode)->i_disksize = inode->i_size;
err = ext4_mark_inode_dirty(handle, inode);
if (err)
return err;
last_block = (inode->i_size + sb->s_blocksize - 1)
>> EXT4_BLOCK_SIZE_BITS(sb);
retry:
err = ext4_es_remove_extent(inode, last_block,
EXT_MAX_BLOCKS - last_block);
if (err == -ENOMEM) {
cond_resched();
congestion_wait(BLK_RW_ASYNC, HZ/50);
goto retry;
}
if (err)
return err;
return ext4_ext_remove_space(inode, last_block, EXT_MAX_BLOCKS - 1);
}
static int ext4_alloc_file_blocks(struct file *file, ext4_lblk_t offset,
ext4_lblk_t len, loff_t new_size,
int flags)
{
struct inode *inode = file_inode(file);
handle_t *handle;
int ret = 0;
int ret2 = 0;
int retries = 0;
int depth = 0;
struct ext4_map_blocks map;
unsigned int credits;
loff_t epos;
BUG_ON(!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS));
map.m_lblk = offset;
map.m_len = len;
/*
* Don't normalize the request if it can fit in one extent so
* that it doesn't get unnecessarily split into multiple
* extents.
*/
if (len <= EXT_UNWRITTEN_MAX_LEN)
flags |= EXT4_GET_BLOCKS_NO_NORMALIZE;
/*
* credits to insert 1 extent into extent tree
*/
credits = ext4_chunk_trans_blocks(inode, len);
depth = ext_depth(inode);
retry:
while (ret >= 0 && len) {
/*
* Recalculate credits when extent tree depth changes.
*/
if (depth != ext_depth(inode)) {
credits = ext4_chunk_trans_blocks(inode, len);
depth = ext_depth(inode);
}
handle = ext4_journal_start(inode, EXT4_HT_MAP_BLOCKS,
credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
break;
}
ret = ext4_map_blocks(handle, inode, &map, flags);
if (ret <= 0) {
ext4_debug("inode #%lu: block %u: len %u: "
"ext4_ext_map_blocks returned %d",
inode->i_ino, map.m_lblk,
map.m_len, ret);
ext4_mark_inode_dirty(handle, inode);
ret2 = ext4_journal_stop(handle);
break;
}
map.m_lblk += ret;
map.m_len = len = len - ret;
epos = (loff_t)map.m_lblk << inode->i_blkbits;
inode->i_ctime = current_time(inode);
if (new_size) {
if (epos > new_size)
epos = new_size;
if (ext4_update_inode_size(inode, epos) & 0x1)
inode->i_mtime = inode->i_ctime;
}
ext4_mark_inode_dirty(handle, inode);
ext4_update_inode_fsync_trans(handle, inode, 1);
ret2 = ext4_journal_stop(handle);
if (ret2)
break;
}
if (ret == -ENOSPC &&
ext4_should_retry_alloc(inode->i_sb, &retries)) {
ret = 0;
goto retry;
}
return ret > 0 ? ret2 : ret;
}
static int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len);
static int ext4_insert_range(struct inode *inode, loff_t offset, loff_t len);
static long ext4_zero_range(struct file *file, loff_t offset,
loff_t len, int mode)
{
struct inode *inode = file_inode(file);
handle_t *handle = NULL;
unsigned int max_blocks;
loff_t new_size = 0;
int ret = 0;
int flags;
int credits;
int partial_begin, partial_end;
loff_t start, end;
ext4_lblk_t lblk;
unsigned int blkbits = inode->i_blkbits;
trace_ext4_zero_range(inode, offset, len, mode);
/* Call ext4_force_commit to flush all data in case of data=journal. */
if (ext4_should_journal_data(inode)) {
ret = ext4_force_commit(inode->i_sb);
if (ret)
return ret;
}
/*
* Round up offset. This is not fallocate, we neet to zero out
* blocks, so convert interior block aligned part of the range to
* unwritten and possibly manually zero out unaligned parts of the
* range.
*/
start = round_up(offset, 1 << blkbits);
end = round_down((offset + len), 1 << blkbits);
if (start < offset || end > offset + len)
return -EINVAL;
partial_begin = offset & ((1 << blkbits) - 1);
partial_end = (offset + len) & ((1 << blkbits) - 1);
lblk = start >> blkbits;
max_blocks = (end >> blkbits);
if (max_blocks < lblk)
max_blocks = 0;
else
max_blocks -= lblk;
inode_lock(inode);
/*
* Indirect files do not support unwritten extnets
*/
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
ret = -EOPNOTSUPP;
goto out_mutex;
}
if (!(mode & FALLOC_FL_KEEP_SIZE) &&
(offset + len > inode->i_size ||
offset + len > EXT4_I(inode)->i_disksize)) {
new_size = offset + len;
ret = inode_newsize_ok(inode, new_size);
if (ret)
goto out_mutex;
}
flags = EXT4_GET_BLOCKS_CREATE_UNWRIT_EXT;
if (mode & FALLOC_FL_KEEP_SIZE)
flags |= EXT4_GET_BLOCKS_KEEP_SIZE;
/* Wait all existing dio workers, newcomers will block on i_mutex */
inode_dio_wait(inode);
/* Preallocate the range including the unaligned edges */
if (partial_begin || partial_end) {
ret = ext4_alloc_file_blocks(file,
round_down(offset, 1 << blkbits) >> blkbits,
(round_up((offset + len), 1 << blkbits) -
round_down(offset, 1 << blkbits)) >> blkbits,
new_size, flags);
if (ret)
goto out_mutex;
}
/* Zero range excluding the unaligned edges */
if (max_blocks > 0) {
flags |= (EXT4_GET_BLOCKS_CONVERT_UNWRITTEN |
EXT4_EX_NOCACHE);
/*
* Prevent page faults from reinstantiating pages we have
* released from page cache.
*/
down_write(&EXT4_I(inode)->i_mmap_sem);
ret = ext4_break_layouts(inode);
if (ret) {
up_write(&EXT4_I(inode)->i_mmap_sem);
goto out_mutex;
}
ret = ext4_update_disksize_before_punch(inode, offset, len);
if (ret) {
up_write(&EXT4_I(inode)->i_mmap_sem);
goto out_mutex;
}
/* Now release the pages and zero block aligned part of pages */
truncate_pagecache_range(inode, start, end - 1);
inode->i_mtime = inode->i_ctime = current_time(inode);
ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size,
flags);
up_write(&EXT4_I(inode)->i_mmap_sem);
if (ret)
goto out_mutex;
}
if (!partial_begin && !partial_end)
goto out_mutex;
/*
* In worst case we have to writeout two nonadjacent unwritten
* blocks and update the inode
*/
credits = (2 * ext4_ext_index_trans_blocks(inode, 2)) + 1;
if (ext4_should_journal_data(inode))
credits += 2;
handle = ext4_journal_start(inode, EXT4_HT_MISC, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
ext4_std_error(inode->i_sb, ret);
goto out_mutex;
}
inode->i_mtime = inode->i_ctime = current_time(inode);
ext4: remove EXT4_EOFBLOCKS_FL and associated code The EXT4_EOFBLOCKS_FL inode flag is used to indicate whether a file contains unwritten blocks past i_size. It's set when ext4_fallocate is called with the KEEP_SIZE flag to extend a file with an unwritten extent. However, this flag hasn't been useful functionally since March, 2012, when a decision was made to remove it from ext4. All traces of EXT4_EOFBLOCKS_FL were removed from e2fsprogs version 1.42.2 by commit 010dc7b90d97 ("e2fsck: remove EXT4_EOFBLOCKS_FL flag handling") at that time. Now that enough time has passed to make e2fsprogs versions containing this modification common, this patch now removes the code associated with EXT4_EOFBLOCKS_FL from the kernel as well. This change has two implications. First, because pre-1.42.2 e2fsck versions only look for a problem if EXT4_EOFBLOCKS_FL is set, and because that bit will never be set by newer kernels containing this patch, old versions of e2fsck won't have a compatibility problem with files created by newer kernels. Second, newer kernels will not clear EXT4_EOFBLOCKS_FL inode flag bits belonging to a file written by an older kernel. If set, it will remain in that state until the file is deleted. Because e2fsck versions since 1.42.2 don't check the flag at all, no adverse effect is expected. However, pre-1.42.2 e2fsck versions that do check the flag may report that it is set when it ought not to be after a file has been truncated or had its unwritten blocks written. In this case, the old version of e2fsck will offer to clear the flag. No adverse effect would then occur whether the user chooses to clear the flag or not. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200211210216.24960-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-11 21:02:16 +00:00
if (new_size)
ext4_update_inode_size(inode, new_size);
ext4_mark_inode_dirty(handle, inode);
/* Zero out partial block at the edges of the range */
ret = ext4_zero_partial_blocks(handle, inode, offset, len);
if (ret >= 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
if (file->f_flags & O_SYNC)
ext4_handle_sync(handle);
ext4_journal_stop(handle);
out_mutex:
inode_unlock(inode);
return ret;
}
/*
* preallocate space for a file. This implements ext4's fallocate file
* operation, which gets called from sys_fallocate system call.
* For block-mapped files, posix_fallocate should fall back to the method
* of writing zeroes to the required new blocks (the same behavior which is
* expected for file systems which do not support fallocate() system call).
*/
long ext4_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
{
struct inode *inode = file_inode(file);
loff_t new_size = 0;
unsigned int max_blocks;
int ret = 0;
int flags;
ext4_lblk_t lblk;
unsigned int blkbits = inode->i_blkbits;
/*
* Encrypted inodes can't handle collapse range or insert
* range since we would need to re-encrypt blocks with a
* different IV or XTS tweak (which are based on the logical
* block number).
*/
if (IS_ENCRYPTED(inode) &&
ext4: allow ZERO_RANGE on encrypted files When ext4 encryption support was first added, ZERO_RANGE was disallowed, supposedly because test failures (e.g. ext4/001) were seen when enabling it, and at the time there wasn't enough time/interest to debug it. However, there's actually no reason why ZERO_RANGE can't work on encrypted files. And it fact it *does* work now. Whole blocks in the zeroed range are converted to unwritten extents, as usual; encryption makes no difference for that part. Partial blocks are zeroed in the pagecache and then ->writepages() encrypts those blocks as usual. ext4_block_zero_page_range() handles reading and decrypting the block if needed before actually doing the pagecache write. Also, f2fs has always supported ZERO_RANGE on encrypted files. As far as I can tell, the reason that ext4/001 was failing in v4.1 was actually because of one of the bugs fixed by commit 36086d43f657 ("ext4 crypto: fix bugs in ext4_encrypted_zeroout()"). The bug made ext4_encrypted_zeroout() always return a positive value, which caused unwritten extents in encrypted files to sometimes not be marked as initialized after being written to. This bug was not actually in ZERO_RANGE; it just happened to trigger during the extents manipulation done in ext4/001 (and probably other tests too). So, let's enable ZERO_RANGE on encrypted files on ext4. Tested with: gce-xfstests -c ext4/encrypt -g auto gce-xfstests -c ext4/encrypt_1k -g auto Got the same set of test failures both with and without this patch. But with this patch 6 fewer tests are skipped: ext4/001, generic/008, generic/009, generic/033, generic/096, and generic/511. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20191226154216.4808-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-12-26 15:42:16 +00:00
(mode & (FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_INSERT_RANGE)))
return -EOPNOTSUPP;
/* Return error if mode is not supported */
if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |
FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE |
FALLOC_FL_INSERT_RANGE))
return -EOPNOTSUPP;
if (mode & FALLOC_FL_PUNCH_HOLE)
return ext4_punch_hole(inode, offset, len);
ret = ext4_convert_inline_data(inode);
if (ret)
return ret;
if (mode & FALLOC_FL_COLLAPSE_RANGE)
return ext4_collapse_range(inode, offset, len);
if (mode & FALLOC_FL_INSERT_RANGE)
return ext4_insert_range(inode, offset, len);
if (mode & FALLOC_FL_ZERO_RANGE)
return ext4_zero_range(file, offset, len, mode);
trace_ext4_fallocate_enter(inode, offset, len, mode);
lblk = offset >> blkbits;
max_blocks = EXT4_MAX_BLOCKS(len, offset, blkbits);
flags = EXT4_GET_BLOCKS_CREATE_UNWRIT_EXT;
if (mode & FALLOC_FL_KEEP_SIZE)
flags |= EXT4_GET_BLOCKS_KEEP_SIZE;
inode_lock(inode);
/*
* We only support preallocation for extent-based files only
*/
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
ret = -EOPNOTSUPP;
goto out;
}
if (!(mode & FALLOC_FL_KEEP_SIZE) &&
(offset + len > inode->i_size ||
offset + len > EXT4_I(inode)->i_disksize)) {
new_size = offset + len;
ret = inode_newsize_ok(inode, new_size);
if (ret)
goto out;
}
/* Wait all existing dio workers, newcomers will block on i_mutex */
inode_dio_wait(inode);
ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size, flags);
if (ret)
goto out;
if (file->f_flags & O_SYNC && EXT4_SB(inode->i_sb)->s_journal) {
ret = jbd2_complete_transaction(EXT4_SB(inode->i_sb)->s_journal,
EXT4_I(inode)->i_sync_tid);
}
out:
inode_unlock(inode);
trace_ext4_fallocate_exit(inode, offset, max_blocks, ret);
return ret;
}
/*
* This function convert a range of blocks to written extents
* The caller of this function will pass the start offset and the size.
* all unwritten extents within this range will be converted to
* written extents.
*
* This function is called from the direct IO end io call back
* function, to convert the fallocated extents after IO is completed.
* Returns 0 on success.
*/
int ext4_convert_unwritten_extents(handle_t *handle, struct inode *inode,
loff_t offset, ssize_t len)
{
unsigned int max_blocks;
int ret = 0;
int ret2 = 0;
struct ext4_map_blocks map;
unsigned int blkbits = inode->i_blkbits;
unsigned int credits = 0;
map.m_lblk = offset >> blkbits;
max_blocks = EXT4_MAX_BLOCKS(len, offset, blkbits);
if (!handle) {
/*
* credits to insert 1 extent into extent tree
*/
credits = ext4_chunk_trans_blocks(inode, max_blocks);
}
while (ret >= 0 && ret < max_blocks) {
map.m_lblk += ret;
map.m_len = (max_blocks -= ret);
if (credits) {
handle = ext4_journal_start(inode, EXT4_HT_MAP_BLOCKS,
credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
break;
}
}
ret = ext4_map_blocks(handle, inode, &map,
EXT4_GET_BLOCKS_IO_CONVERT_EXT);
if (ret <= 0)
ext4_warning(inode->i_sb,
"inode #%lu: block %u: len %u: "
"ext4_ext_map_blocks returned %d",
inode->i_ino, map.m_lblk,
map.m_len, ret);
ext4_mark_inode_dirty(handle, inode);
if (credits)
ret2 = ext4_journal_stop(handle);
if (ret <= 0 || ret2)
break;
}
return ret > 0 ? ret2 : ret;
}
ext4: make FIEMAP and delayed allocation play well together Fix the FIEMAP ioctl so that it returns all of the page ranges which are still subject to delayed allocation. We were missing some cases if the file was sparse. Reported by Chris Mason <chris.mason@oracle.com>: >We've had reports on btrfs that cp is giving us files full of zeros >instead of actually copying them. It was tracked down to a bug with >the btrfs fiemap implementation where it was returning holes for >delalloc ranges. > >Newer versions of cp are trusting fiemap to tell it where the holes >are, which does seem like a pretty neat trick. > >I decided to give xfs and ext4 a shot with a few tests cases too, xfs >passed with all the ones btrfs was getting wrong, and ext4 got the basic >delalloc case right. >$ mkfs.ext4 /dev/xxx >$ mount /dev/xxx /mnt >$ dd if=/dev/zero of=/mnt/foo bs=1M count=1 >$ fiemap-test foo >ext: 0 logical: [ 0.. 255] phys: 0.. 255 >flags: 0x007 tot: 256 > >Horray! But once we throw a hole in, things go bad: >$ mkfs.ext4 /dev/xxx >$ mount /dev/xxx /mnt >$ dd if=/dev/zero of=/mnt/foo bs=1M count=1 seek=1 >$ fiemap-test foo >< no output > > >We've got a delalloc extent after the hole and ext4 fiemap didn't find >it. If I run sync to kick the delalloc out: >$sync >$ fiemap-test foo >ext: 0 logical: [ 256.. 511] phys: 34048.. 34303 >flags: 0x001 tot: 256 > >fiemap-test is sitting in my /usr/local/bin, and I have no idea how it >got there. It's full of pretty comments so I know it isn't mine, but >you can grab it here: > >http://oss.oracle.com/~mason/fiemap-test.c > >xfsqa has a fiemap program too. After Fix, test results are as follows: ext: 0 logical: [ 256.. 511] phys: 0.. 255 flags: 0x007 tot: 256 ext: 0 logical: [ 256.. 511] phys: 33280.. 33535 flags: 0x001 tot: 256 $ mkfs.ext4 /dev/xxx $ mount /dev/xxx /mnt $ dd if=/dev/zero of=/mnt/foo bs=1M count=1 seek=1 $ sync $ dd if=/dev/zero of=/mnt/foo bs=1M count=1 seek=3 $ dd if=/dev/zero of=/mnt/foo bs=1M count=1 seek=5 $ fiemap-test foo ext: 0 logical: [ 256.. 511] phys: 33280.. 33535 flags: 0x000 tot: 256 ext: 1 logical: [ 768.. 1023] phys: 0.. 255 flags: 0x006 tot: 256 ext: 2 logical: [ 1280.. 1535] phys: 0.. 255 flags: 0x007 tot: 256 Tested-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-27 22:25:47 +00:00
int ext4_convert_unwritten_io_end_vec(handle_t *handle, ext4_io_end_t *io_end)
{
int ret, err = 0;
struct ext4_io_end_vec *io_end_vec;
/*
* This is somewhat ugly but the idea is clear: When transaction is
* reserved, everything goes into it. Otherwise we rather start several
* smaller transactions for conversion of each extent separately.
*/
if (handle) {
handle = ext4_journal_start_reserved(handle,
EXT4_HT_EXT_CONVERT);
if (IS_ERR(handle))
return PTR_ERR(handle);
}
list_for_each_entry(io_end_vec, &io_end->list_vec, list) {
ret = ext4_convert_unwritten_extents(handle, io_end->inode,
io_end_vec->offset,
io_end_vec->size);
if (ret)
break;
}
if (handle)
err = ext4_journal_stop(handle);
return ret < 0 ? ret : err;
}
static int ext4_iomap_xattr_fiemap(struct inode *inode, struct iomap *iomap)
{
__u64 physical = 0;
__u64 length = 0;
int blockbits = inode->i_sb->s_blocksize_bits;
int error = 0;
u16 iomap_type;
/* in-inode? */
if (ext4_test_inode_state(inode, EXT4_STATE_XATTR)) {
struct ext4_iloc iloc;
int offset; /* offset of xattr in inode */
error = ext4_get_inode_loc(inode, &iloc);
if (error)
return error;
physical = (__u64)iloc.bh->b_blocknr << blockbits;
offset = EXT4_GOOD_OLD_INODE_SIZE +
EXT4_I(inode)->i_extra_isize;
physical += offset;
length = EXT4_SB(inode->i_sb)->s_inode_size - offset;
brelse(iloc.bh);
iomap_type = IOMAP_INLINE;
} else if (EXT4_I(inode)->i_file_acl) { /* external block */
physical = (__u64)EXT4_I(inode)->i_file_acl << blockbits;
length = inode->i_sb->s_blocksize;
iomap_type = IOMAP_MAPPED;
} else {
/* no in-inode or external block for xattr, so return -ENOENT */
error = -ENOENT;
goto out;
}
iomap->addr = physical;
iomap->offset = 0;
iomap->length = length;
iomap->type = iomap_type;
iomap->flags = 0;
out:
return error;
}
static int ext4_iomap_xattr_begin(struct inode *inode, loff_t offset,
loff_t length, unsigned flags,
struct iomap *iomap, struct iomap *srcmap)
{
int error;
error = ext4_iomap_xattr_fiemap(inode, iomap);
if (error == 0 && (offset >= iomap->length))
error = -ENOENT;
return error;
}
static const struct iomap_ops ext4_iomap_xattr_ops = {
.iomap_begin = ext4_iomap_xattr_begin,
};
static int _ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
__u64 start, __u64 len, bool from_es_cache)
{
ext4_lblk_t start_blk;
u32 ext4_fiemap_flags = FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR;
int error = 0;
if (fieinfo->fi_flags & FIEMAP_FLAG_CACHE) {
error = ext4_ext_precache(inode);
if (error)
return error;
fieinfo->fi_flags &= ~FIEMAP_FLAG_CACHE;
}
if (from_es_cache)
ext4_fiemap_flags &= FIEMAP_FLAG_XATTR;
if (fiemap_check_flags(fieinfo, ext4_fiemap_flags))
return -EBADR;
if (fieinfo->fi_flags & FIEMAP_FLAG_XATTR) {
fieinfo->fi_flags &= ~FIEMAP_FLAG_XATTR;
error = iomap_fiemap(inode, fieinfo, start, len,
&ext4_iomap_xattr_ops);
} else if (!from_es_cache) {
error = iomap_fiemap(inode, fieinfo, start, len,
&ext4_iomap_report_ops);
} else {
ext4_lblk_t len_blks;
__u64 last_blk;
start_blk = start >> inode->i_sb->s_blocksize_bits;
last_blk = (start + len - 1) >> inode->i_sb->s_blocksize_bits;
ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-06 04:05:17 +00:00
if (last_blk >= EXT_MAX_BLOCKS)
last_blk = EXT_MAX_BLOCKS-1;
len_blks = ((ext4_lblk_t) last_blk) - start_blk + 1;
/*
ext4: prevent race while walking extent tree for fiemap Currently ext4_ext_walk_space() only takes i_data_sem for read when searching for the extent at given block with ext4_ext_find_extent(). Then it drops the lock and the extent tree can be changed at will. However later on we're searching for the 'next' extent, but the extent tree might already have changed, so the information might not be accurate. In fact we can hit BUG_ON(end <= start) if the extent got inserted into the tree after the one we found and before the block we were searching for. This has been reproduced by running xfstests 225 in loop on s390x architecture, but theoretically we could hit this on any other architecture as well, but probably not as often. Moreover the extent currently in delayed allocation might be allocated after we search the extent tree and before we search extent status tree delayed buffers resulting in those delayed buffers being completely missed, even though completely written and allocated. We fix all those problems in several steps: 1. remove unnecessary callback indirection 2. rename functions ext4_ext_walk_space -> ext4_fill_fiemap_extents ext4_ext_fiemap_cb -> ext4_find_delayed_extent 3. move fiemap_fill_next_extent() into ext4_fill_fiemap_extents() 4. hold the i_data_sem for: ext4_ext_find_extent() ext4_ext_next_allocated_block() ext4_find_delayed_extent() 5. call fiemap_fill_next_extent after releasing the i_data_sem 6. move path reinitialization into the critical section. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-28 17:32:26 +00:00
* Walk the extent tree gathering extent information
* and pushing extents back to the user.
*/
error = ext4_fill_es_cache_info(inode, start_blk, len_blks,
fieinfo);
}
return error;
}
int ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
__u64 start, __u64 len)
{
return _ext4_fiemap(inode, fieinfo, start, len, false);
}
int ext4_get_es_cache(struct inode *inode, struct fiemap_extent_info *fieinfo,
__u64 start, __u64 len)
{
if (ext4_has_inline_data(inode)) {
int has_inline;
down_read(&EXT4_I(inode)->xattr_sem);
has_inline = ext4_has_inline_data(inode);
up_read(&EXT4_I(inode)->xattr_sem);
if (has_inline)
return 0;
}
return _ext4_fiemap(inode, fieinfo, start, len, true);
}
/*
* ext4_access_path:
* Function to access the path buffer for marking it dirty.
* It also checks if there are sufficient credits left in the journal handle
* to update path.
*/
static int
ext4_access_path(handle_t *handle, struct inode *inode,
struct ext4_ext_path *path)
{
int credits, err;
if (!ext4_handle_valid(handle))
return 0;
/*
* Check if need to extend journal credits
* 3 for leaf, sb, and inode plus 2 (bmap and group
* descriptor) for each block group; assume two block
* groups
*/
credits = ext4_writepage_trans_blocks(inode);
err = ext4_datasem_ensure_credits(handle, inode, 7, credits, 0);
if (err < 0)
return err;
err = ext4_ext_get_access(handle, inode, path);
return err;
}
/*
* ext4_ext_shift_path_extents:
* Shift the extents of a path structure lying between path[depth].p_ext
* and EXT_LAST_EXTENT(path[depth].p_hdr), by @shift blocks. @SHIFT tells
* if it is right shift or left shift operation.
*/
static int
ext4_ext_shift_path_extents(struct ext4_ext_path *path, ext4_lblk_t shift,
struct inode *inode, handle_t *handle,
enum SHIFT_DIRECTION SHIFT)
{
int depth, err = 0;
struct ext4_extent *ex_start, *ex_last;
bool update = false;
depth = path->p_depth;
while (depth >= 0) {
if (depth == path->p_depth) {
ex_start = path[depth].p_ext;
if (!ex_start)
return -EFSCORRUPTED;
ex_last = EXT_LAST_EXTENT(path[depth].p_hdr);
err = ext4_access_path(handle, inode, path + depth);
if (err)
goto out;
if (ex_start == EXT_FIRST_EXTENT(path[depth].p_hdr))
update = true;
while (ex_start <= ex_last) {
if (SHIFT == SHIFT_LEFT) {
le32_add_cpu(&ex_start->ee_block,
-shift);
/* Try to merge to the left. */
if ((ex_start >
EXT_FIRST_EXTENT(path[depth].p_hdr))
&&
ext4_ext_try_to_merge_right(inode,
path, ex_start - 1))
ex_last--;
else
ex_start++;
} else {
le32_add_cpu(&ex_last->ee_block, shift);
ext4_ext_try_to_merge_right(inode, path,
ex_last);
ex_last--;
}
}
err = ext4_ext_dirty(handle, inode, path + depth);
if (err)
goto out;
if (--depth < 0 || !update)
break;
}
/* Update index too */
err = ext4_access_path(handle, inode, path + depth);
if (err)
goto out;
if (SHIFT == SHIFT_LEFT)
le32_add_cpu(&path[depth].p_idx->ei_block, -shift);
else
le32_add_cpu(&path[depth].p_idx->ei_block, shift);
err = ext4_ext_dirty(handle, inode, path + depth);
if (err)
goto out;
/* we are done if current index is not a starting index */
if (path[depth].p_idx != EXT_FIRST_INDEX(path[depth].p_hdr))
break;
depth--;
}
out:
return err;
}
/*
* ext4_ext_shift_extents:
* All the extents which lies in the range from @start to the last allocated
* block for the @inode are shifted either towards left or right (depending
* upon @SHIFT) by @shift blocks.
* On success, 0 is returned, error otherwise.
*/
static int
ext4_ext_shift_extents(struct inode *inode, handle_t *handle,
ext4_lblk_t start, ext4_lblk_t shift,
enum SHIFT_DIRECTION SHIFT)
{
struct ext4_ext_path *path;
int ret = 0, depth;
struct ext4_extent *extent;
ext4_lblk_t stop, *iterator, ex_start, ex_end;
/* Let path point to the last extent */
path = ext4_find_extent(inode, EXT_MAX_BLOCKS - 1, NULL,
EXT4_EX_NOCACHE);
if (IS_ERR(path))
return PTR_ERR(path);
depth = path->p_depth;
extent = path[depth].p_ext;
if (!extent)
goto out;
ext4: Include forgotten start block on fallocate insert range While doing 'insert range' start block should be also shifted right. The bug can be easily reproduced by the following test: ptr = malloc(4096); assert(ptr); fd = open("./ext4.file", O_CREAT | O_TRUNC | O_RDWR, 0600); assert(fd >= 0); rc = fallocate(fd, 0, 0, 8192); assert(rc == 0); for (i = 0; i < 2048; i++) *((unsigned short *)ptr + i) = 0xbeef; rc = pwrite(fd, ptr, 4096, 0); assert(rc == 4096); rc = pwrite(fd, ptr, 4096, 4096); assert(rc == 4096); for (block = 2; block < 1000; block++) { rc = fallocate(fd, FALLOC_FL_INSERT_RANGE, 4096, 4096); assert(rc == 0); for (i = 0; i < 2048; i++) *((unsigned short *)ptr + i) = block; rc = pwrite(fd, ptr, 4096, 4096); assert(rc == 4096); } Because start block is not included in the range the hole appears at the wrong offset (just after the desired offset) and the following pwrite() overwrites already existent block, keeping hole untouched. Simple way to verify wrong behaviour is to check zeroed blocks after the test: $ hexdump ./ext4.file | grep '0000 0000' The root cause of the bug is a wrong range (start, stop], where start should be inclusive, i.e. [start, stop]. This patch fixes the problem by including start into the range. But not to break left shift (range collapse) stop points to the beginning of the a block, not to the end. The other not obvious change is an iterator check on validness in a main loop. Because iterator is unsigned the following corner case should be considered with care: insert a block at 0 offset, when stop variables overflows and never becomes less than start, which is 0. To handle this special case iterator is set to NULL to indicate that end of the loop is reached. Fixes: 331573febb6a2 Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: stable@vger.kernel.org
2017-01-09 01:59:35 +00:00
stop = le32_to_cpu(extent->ee_block);
/*
* For left shifts, make sure the hole on the left is big enough to
* accommodate the shift. For right shifts, make sure the last extent
* won't be shifted beyond EXT_MAX_BLOCKS.
*/
if (SHIFT == SHIFT_LEFT) {
path = ext4_find_extent(inode, start - 1, &path,
EXT4_EX_NOCACHE);
if (IS_ERR(path))
return PTR_ERR(path);
depth = path->p_depth;
extent = path[depth].p_ext;
if (extent) {
ex_start = le32_to_cpu(extent->ee_block);
ex_end = le32_to_cpu(extent->ee_block) +
ext4_ext_get_actual_len(extent);
} else {
ex_start = 0;
ex_end = 0;
}
if ((start == ex_start && shift > ex_start) ||
(shift > start - ex_end)) {
ret = -EINVAL;
goto out;
}
} else {
if (shift > EXT_MAX_BLOCKS -
(stop + ext4_ext_get_actual_len(extent))) {
ret = -EINVAL;
goto out;
}
}
/*
* In case of left shift, iterator points to start and it is increased
* till we reach stop. In case of right shift, iterator points to stop
* and it is decreased till we reach start.
*/
if (SHIFT == SHIFT_LEFT)
iterator = &start;
else
iterator = &stop;
ext4: Include forgotten start block on fallocate insert range While doing 'insert range' start block should be also shifted right. The bug can be easily reproduced by the following test: ptr = malloc(4096); assert(ptr); fd = open("./ext4.file", O_CREAT | O_TRUNC | O_RDWR, 0600); assert(fd >= 0); rc = fallocate(fd, 0, 0, 8192); assert(rc == 0); for (i = 0; i < 2048; i++) *((unsigned short *)ptr + i) = 0xbeef; rc = pwrite(fd, ptr, 4096, 0); assert(rc == 4096); rc = pwrite(fd, ptr, 4096, 4096); assert(rc == 4096); for (block = 2; block < 1000; block++) { rc = fallocate(fd, FALLOC_FL_INSERT_RANGE, 4096, 4096); assert(rc == 0); for (i = 0; i < 2048; i++) *((unsigned short *)ptr + i) = block; rc = pwrite(fd, ptr, 4096, 4096); assert(rc == 4096); } Because start block is not included in the range the hole appears at the wrong offset (just after the desired offset) and the following pwrite() overwrites already existent block, keeping hole untouched. Simple way to verify wrong behaviour is to check zeroed blocks after the test: $ hexdump ./ext4.file | grep '0000 0000' The root cause of the bug is a wrong range (start, stop], where start should be inclusive, i.e. [start, stop]. This patch fixes the problem by including start into the range. But not to break left shift (range collapse) stop points to the beginning of the a block, not to the end. The other not obvious change is an iterator check on validness in a main loop. Because iterator is unsigned the following corner case should be considered with care: insert a block at 0 offset, when stop variables overflows and never becomes less than start, which is 0. To handle this special case iterator is set to NULL to indicate that end of the loop is reached. Fixes: 331573febb6a2 Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: stable@vger.kernel.org
2017-01-09 01:59:35 +00:00
/*
* Its safe to start updating extents. Start and stop are unsigned, so
* in case of right shift if extent with 0 block is reached, iterator
* becomes NULL to indicate the end of the loop.
*/
while (iterator && start <= stop) {
path = ext4_find_extent(inode, *iterator, &path,
EXT4_EX_NOCACHE);
if (IS_ERR(path))
return PTR_ERR(path);
depth = path->p_depth;
extent = path[depth].p_ext;
if (!extent) {
EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
(unsigned long) *iterator);
return -EFSCORRUPTED;
}
if (SHIFT == SHIFT_LEFT && *iterator >
le32_to_cpu(extent->ee_block)) {
/* Hole, move to the next extent */
if (extent < EXT_LAST_EXTENT(path[depth].p_hdr)) {
path[depth].p_ext++;
} else {
*iterator = ext4_ext_next_allocated_block(path);
continue;
}
}
if (SHIFT == SHIFT_LEFT) {
extent = EXT_LAST_EXTENT(path[depth].p_hdr);
*iterator = le32_to_cpu(extent->ee_block) +
ext4_ext_get_actual_len(extent);
} else {
extent = EXT_FIRST_EXTENT(path[depth].p_hdr);
ext4: Include forgotten start block on fallocate insert range While doing 'insert range' start block should be also shifted right. The bug can be easily reproduced by the following test: ptr = malloc(4096); assert(ptr); fd = open("./ext4.file", O_CREAT | O_TRUNC | O_RDWR, 0600); assert(fd >= 0); rc = fallocate(fd, 0, 0, 8192); assert(rc == 0); for (i = 0; i < 2048; i++) *((unsigned short *)ptr + i) = 0xbeef; rc = pwrite(fd, ptr, 4096, 0); assert(rc == 4096); rc = pwrite(fd, ptr, 4096, 4096); assert(rc == 4096); for (block = 2; block < 1000; block++) { rc = fallocate(fd, FALLOC_FL_INSERT_RANGE, 4096, 4096); assert(rc == 0); for (i = 0; i < 2048; i++) *((unsigned short *)ptr + i) = block; rc = pwrite(fd, ptr, 4096, 4096); assert(rc == 4096); } Because start block is not included in the range the hole appears at the wrong offset (just after the desired offset) and the following pwrite() overwrites already existent block, keeping hole untouched. Simple way to verify wrong behaviour is to check zeroed blocks after the test: $ hexdump ./ext4.file | grep '0000 0000' The root cause of the bug is a wrong range (start, stop], where start should be inclusive, i.e. [start, stop]. This patch fixes the problem by including start into the range. But not to break left shift (range collapse) stop points to the beginning of the a block, not to the end. The other not obvious change is an iterator check on validness in a main loop. Because iterator is unsigned the following corner case should be considered with care: insert a block at 0 offset, when stop variables overflows and never becomes less than start, which is 0. To handle this special case iterator is set to NULL to indicate that end of the loop is reached. Fixes: 331573febb6a2 Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: stable@vger.kernel.org
2017-01-09 01:59:35 +00:00
if (le32_to_cpu(extent->ee_block) > 0)
*iterator = le32_to_cpu(extent->ee_block) - 1;
else
/* Beginning is reached, end of the loop */
iterator = NULL;
/* Update path extent in case we need to stop */
while (le32_to_cpu(extent->ee_block) < start)
extent++;
path[depth].p_ext = extent;
}
ret = ext4_ext_shift_path_extents(path, shift, inode,
handle, SHIFT);
if (ret)
break;
}
out:
ext4_ext_drop_refs(path);
kfree(path);
return ret;
}
/*
* ext4_collapse_range:
* This implements the fallocate's collapse range functionality for ext4
* Returns: 0 and non-zero on error.
*/
static int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len)
{
struct super_block *sb = inode->i_sb;
ext4_lblk_t punch_start, punch_stop;
handle_t *handle;
unsigned int credits;
loff_t new_size, ioffset;
int ret;
/*
* We need to test this early because xfstests assumes that a
* collapse range of (0, 1) will return EOPNOTSUPP if the file
* system does not support collapse range.
*/
if (!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
return -EOPNOTSUPP;
/* Collapse range works only on fs cluster size aligned regions. */
if (!IS_ALIGNED(offset | len, EXT4_CLUSTER_SIZE(sb)))
return -EINVAL;
trace_ext4_collapse_range(inode, offset, len);
punch_start = offset >> EXT4_BLOCK_SIZE_BITS(sb);
punch_stop = (offset + len) >> EXT4_BLOCK_SIZE_BITS(sb);
/* Call ext4_force_commit to flush all data in case of data=journal. */
if (ext4_should_journal_data(inode)) {
ret = ext4_force_commit(inode->i_sb);
if (ret)
return ret;
}
inode_lock(inode);
/*
* There is no need to overlap collapse range with EOF, in which case
* it is effectively a truncate operation
*/
if (offset + len >= inode->i_size) {
ret = -EINVAL;
goto out_mutex;
}
/* Currently just for extent based files */
if (!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
ret = -EOPNOTSUPP;
goto out_mutex;
}
/* Wait for existing dio to complete */
inode_dio_wait(inode);
/*
* Prevent page faults from reinstantiating pages we have released from
* page cache.
*/
down_write(&EXT4_I(inode)->i_mmap_sem);
ret = ext4_break_layouts(inode);
if (ret)
goto out_mmap;
/*
* Need to round down offset to be aligned with page size boundary
* for page size > block size.
*/
ioffset = round_down(offset, PAGE_SIZE);
/*
* Write tail of the last page before removed range since it will get
* removed from the page cache below.
*/
ret = filemap_write_and_wait_range(inode->i_mapping, ioffset, offset);
if (ret)
goto out_mmap;
/*
* Write data that will be shifted to preserve them when discarding
* page cache below. We are also protected from pages becoming dirty
* by i_mmap_sem.
*/
ret = filemap_write_and_wait_range(inode->i_mapping, offset + len,
LLONG_MAX);
if (ret)
goto out_mmap;
truncate_pagecache(inode, ioffset);
credits = ext4_writepage_trans_blocks(inode);
handle = ext4_journal_start(inode, EXT4_HT_TRUNCATE, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
goto out_mmap;
}
down_write(&EXT4_I(inode)->i_data_sem);
ext4_discard_preallocations(inode);
ret = ext4_es_remove_extent(inode, punch_start,
EXT_MAX_BLOCKS - punch_start);
if (ret) {
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
}
ret = ext4_ext_remove_space(inode, punch_start, punch_stop - 1);
if (ret) {
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
}
ext4_discard_preallocations(inode);
ret = ext4_ext_shift_extents(inode, handle, punch_stop,
punch_stop - punch_start, SHIFT_LEFT);
if (ret) {
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
}
new_size = inode->i_size - len;
i_size_write(inode, new_size);
EXT4_I(inode)->i_disksize = new_size;
up_write(&EXT4_I(inode)->i_data_sem);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
inode->i_mtime = inode->i_ctime = current_time(inode);
ext4_mark_inode_dirty(handle, inode);
ext4_update_inode_fsync_trans(handle, inode, 1);
out_stop:
ext4_journal_stop(handle);
out_mmap:
up_write(&EXT4_I(inode)->i_mmap_sem);
out_mutex:
inode_unlock(inode);
return ret;
}
/*
* ext4_insert_range:
* This function implements the FALLOC_FL_INSERT_RANGE flag of fallocate.
* The data blocks starting from @offset to the EOF are shifted by @len
* towards right to create a hole in the @inode. Inode size is increased
* by len bytes.
* Returns 0 on success, error otherwise.
*/
static int ext4_insert_range(struct inode *inode, loff_t offset, loff_t len)
{
struct super_block *sb = inode->i_sb;
handle_t *handle;
struct ext4_ext_path *path;
struct ext4_extent *extent;
ext4_lblk_t offset_lblk, len_lblk, ee_start_lblk = 0;
unsigned int credits, ee_len;
int ret = 0, depth, split_flag = 0;
loff_t ioffset;
/*
* We need to test this early because xfstests assumes that an
* insert range of (0, 1) will return EOPNOTSUPP if the file
* system does not support insert range.
*/
if (!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
return -EOPNOTSUPP;
/* Insert range works only on fs cluster size aligned regions. */
if (!IS_ALIGNED(offset | len, EXT4_CLUSTER_SIZE(sb)))
return -EINVAL;
trace_ext4_insert_range(inode, offset, len);
offset_lblk = offset >> EXT4_BLOCK_SIZE_BITS(sb);
len_lblk = len >> EXT4_BLOCK_SIZE_BITS(sb);
/* Call ext4_force_commit to flush all data in case of data=journal */
if (ext4_should_journal_data(inode)) {
ret = ext4_force_commit(inode->i_sb);
if (ret)
return ret;
}
inode_lock(inode);
/* Currently just for extent based files */
if (!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
ret = -EOPNOTSUPP;
goto out_mutex;
}
/* Check whether the maximum file size would be exceeded */
if (len > inode->i_sb->s_maxbytes - inode->i_size) {
ret = -EFBIG;
goto out_mutex;
}
/* Offset must be less than i_size */
if (offset >= inode->i_size) {
ret = -EINVAL;
goto out_mutex;
}
/* Wait for existing dio to complete */
inode_dio_wait(inode);
/*
* Prevent page faults from reinstantiating pages we have released from
* page cache.
*/
down_write(&EXT4_I(inode)->i_mmap_sem);
ret = ext4_break_layouts(inode);
if (ret)
goto out_mmap;
/*
* Need to round down to align start offset to page size boundary
* for page size > block size.
*/
ioffset = round_down(offset, PAGE_SIZE);
/* Write out all dirty pages */
ret = filemap_write_and_wait_range(inode->i_mapping, ioffset,
LLONG_MAX);
if (ret)
goto out_mmap;
truncate_pagecache(inode, ioffset);
credits = ext4_writepage_trans_blocks(inode);
handle = ext4_journal_start(inode, EXT4_HT_TRUNCATE, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
goto out_mmap;
}
/* Expand file to avoid data loss if there is error while shifting */
inode->i_size += len;
EXT4_I(inode)->i_disksize += len;
inode->i_mtime = inode->i_ctime = current_time(inode);
ret = ext4_mark_inode_dirty(handle, inode);
if (ret)
goto out_stop;
down_write(&EXT4_I(inode)->i_data_sem);
ext4_discard_preallocations(inode);
path = ext4_find_extent(inode, offset_lblk, NULL, 0);
if (IS_ERR(path)) {
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
}
depth = ext_depth(inode);
extent = path[depth].p_ext;
if (extent) {
ee_start_lblk = le32_to_cpu(extent->ee_block);
ee_len = ext4_ext_get_actual_len(extent);
/*
* If offset_lblk is not the starting block of extent, split
* the extent @offset_lblk
*/
if ((offset_lblk > ee_start_lblk) &&
(offset_lblk < (ee_start_lblk + ee_len))) {
if (ext4_ext_is_unwritten(extent))
split_flag = EXT4_EXT_MARK_UNWRIT1 |
EXT4_EXT_MARK_UNWRIT2;
ret = ext4_split_extent_at(handle, inode, &path,
offset_lblk, split_flag,
EXT4_EX_NOCACHE |
EXT4_GET_BLOCKS_PRE_IO |
EXT4_GET_BLOCKS_METADATA_NOFAIL);
}
ext4_ext_drop_refs(path);
kfree(path);
if (ret < 0) {
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
}
} else {
ext4_ext_drop_refs(path);
kfree(path);
}
ret = ext4_es_remove_extent(inode, offset_lblk,
EXT_MAX_BLOCKS - offset_lblk);
if (ret) {
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
}
/*
* if offset_lblk lies in a hole which is at start of file, use
* ee_start_lblk to shift extents
*/
ret = ext4_ext_shift_extents(inode, handle,
ee_start_lblk > offset_lblk ? ee_start_lblk : offset_lblk,
len_lblk, SHIFT_RIGHT);
up_write(&EXT4_I(inode)->i_data_sem);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
if (ret >= 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
out_stop:
ext4_journal_stop(handle);
out_mmap:
up_write(&EXT4_I(inode)->i_mmap_sem);
out_mutex:
inode_unlock(inode);
return ret;
}
/**
* ext4_swap_extents() - Swap extents between two inodes
* @handle: handle for this transaction
* @inode1: First inode
* @inode2: Second inode
* @lblk1: Start block for first inode
* @lblk2: Start block for second inode
* @count: Number of blocks to swap
* @unwritten: Mark second inode's extents as unwritten after swap
* @erp: Pointer to save error value
*
* This helper routine does exactly what is promise "swap extents". All other
* stuff such as page-cache locking consistency, bh mapping consistency or
* extent's data copying must be performed by caller.
* Locking:
* i_mutex is held for both inodes
* i_data_sem is locked for write for both inodes
* Assumptions:
* All pages from requested range are locked for both inodes
*/
int
ext4_swap_extents(handle_t *handle, struct inode *inode1,
struct inode *inode2, ext4_lblk_t lblk1, ext4_lblk_t lblk2,
ext4_lblk_t count, int unwritten, int *erp)
{
struct ext4_ext_path *path1 = NULL;
struct ext4_ext_path *path2 = NULL;
int replaced_count = 0;
BUG_ON(!rwsem_is_locked(&EXT4_I(inode1)->i_data_sem));
BUG_ON(!rwsem_is_locked(&EXT4_I(inode2)->i_data_sem));
BUG_ON(!inode_is_locked(inode1));
BUG_ON(!inode_is_locked(inode2));
*erp = ext4_es_remove_extent(inode1, lblk1, count);
if (unlikely(*erp))
return 0;
*erp = ext4_es_remove_extent(inode2, lblk2, count);
if (unlikely(*erp))
return 0;
while (count) {
struct ext4_extent *ex1, *ex2, tmp_ex;
ext4_lblk_t e1_blk, e2_blk;
int e1_len, e2_len, len;
int split = 0;
path1 = ext4_find_extent(inode1, lblk1, NULL, EXT4_EX_NOCACHE);
if (IS_ERR(path1)) {
*erp = PTR_ERR(path1);
path1 = NULL;
finish:
count = 0;
goto repeat;
}
path2 = ext4_find_extent(inode2, lblk2, NULL, EXT4_EX_NOCACHE);
if (IS_ERR(path2)) {
*erp = PTR_ERR(path2);
path2 = NULL;
goto finish;
}
ex1 = path1[path1->p_depth].p_ext;
ex2 = path2[path2->p_depth].p_ext;
/* Do we have somthing to swap ? */
if (unlikely(!ex2 || !ex1))
goto finish;
e1_blk = le32_to_cpu(ex1->ee_block);
e2_blk = le32_to_cpu(ex2->ee_block);
e1_len = ext4_ext_get_actual_len(ex1);
e2_len = ext4_ext_get_actual_len(ex2);
/* Hole handling */
if (!in_range(lblk1, e1_blk, e1_len) ||
!in_range(lblk2, e2_blk, e2_len)) {
ext4_lblk_t next1, next2;
/* if hole after extent, then go to next extent */
next1 = ext4_ext_next_allocated_block(path1);
next2 = ext4_ext_next_allocated_block(path2);
/* If hole before extent, then shift to that extent */
if (e1_blk > lblk1)
next1 = e1_blk;
if (e2_blk > lblk2)
next2 = e2_blk;
/* Do we have something to swap */
if (next1 == EXT_MAX_BLOCKS || next2 == EXT_MAX_BLOCKS)
goto finish;
/* Move to the rightest boundary */
len = next1 - lblk1;
if (len < next2 - lblk2)
len = next2 - lblk2;
if (len > count)
len = count;
lblk1 += len;
lblk2 += len;
count -= len;
goto repeat;
}
/* Prepare left boundary */
if (e1_blk < lblk1) {
split = 1;
*erp = ext4_force_split_extent_at(handle, inode1,
&path1, lblk1, 0);
if (unlikely(*erp))
goto finish;
}
if (e2_blk < lblk2) {
split = 1;
*erp = ext4_force_split_extent_at(handle, inode2,
&path2, lblk2, 0);
if (unlikely(*erp))
goto finish;
}
/* ext4_split_extent_at() may result in leaf extent split,
* path must to be revalidated. */
if (split)
goto repeat;
/* Prepare right boundary */
len = count;
if (len > e1_blk + e1_len - lblk1)
len = e1_blk + e1_len - lblk1;
if (len > e2_blk + e2_len - lblk2)
len = e2_blk + e2_len - lblk2;
if (len != e1_len) {
split = 1;
*erp = ext4_force_split_extent_at(handle, inode1,
&path1, lblk1 + len, 0);
if (unlikely(*erp))
goto finish;
}
if (len != e2_len) {
split = 1;
*erp = ext4_force_split_extent_at(handle, inode2,
&path2, lblk2 + len, 0);
if (*erp)
goto finish;
}
/* ext4_split_extent_at() may result in leaf extent split,
* path must to be revalidated. */
if (split)
goto repeat;
BUG_ON(e2_len != e1_len);
*erp = ext4_ext_get_access(handle, inode1, path1 + path1->p_depth);
if (unlikely(*erp))
goto finish;
*erp = ext4_ext_get_access(handle, inode2, path2 + path2->p_depth);
if (unlikely(*erp))
goto finish;
/* Both extents are fully inside boundaries. Swap it now */
tmp_ex = *ex1;
ext4_ext_store_pblock(ex1, ext4_ext_pblock(ex2));
ext4_ext_store_pblock(ex2, ext4_ext_pblock(&tmp_ex));
ex1->ee_len = cpu_to_le16(e2_len);
ex2->ee_len = cpu_to_le16(e1_len);
if (unwritten)
ext4_ext_mark_unwritten(ex2);
if (ext4_ext_is_unwritten(&tmp_ex))
ext4_ext_mark_unwritten(ex1);
ext4_ext_try_to_merge(handle, inode2, path2, ex2);
ext4_ext_try_to_merge(handle, inode1, path1, ex1);
*erp = ext4_ext_dirty(handle, inode2, path2 +
path2->p_depth);
if (unlikely(*erp))
goto finish;
*erp = ext4_ext_dirty(handle, inode1, path1 +
path1->p_depth);
/*
* Looks scarry ah..? second inode already points to new blocks,
* and it was successfully dirtied. But luckily error may happen
* only due to journal error, so full transaction will be
* aborted anyway.
*/
if (unlikely(*erp))
goto finish;
lblk1 += len;
lblk2 += len;
replaced_count += len;
count -= len;
repeat:
ext4_ext_drop_refs(path1);
kfree(path1);
ext4_ext_drop_refs(path2);
kfree(path2);
path1 = path2 = NULL;
}
return replaced_count;
}
/*
* ext4_clu_mapped - determine whether any block in a logical cluster has
* been mapped to a physical cluster
*
* @inode - file containing the logical cluster
* @lclu - logical cluster of interest
*
* Returns 1 if any block in the logical cluster is mapped, signifying
* that a physical cluster has been allocated for it. Otherwise,
* returns 0. Can also return negative error codes. Derived from
* ext4_ext_map_blocks().
*/
int ext4_clu_mapped(struct inode *inode, ext4_lblk_t lclu)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_ext_path *path;
int depth, mapped = 0, err = 0;
struct ext4_extent *extent;
ext4_lblk_t first_lblk, first_lclu, last_lclu;
/* search for the extent closest to the first block in the cluster */
path = ext4_find_extent(inode, EXT4_C2B(sbi, lclu), NULL, 0);
if (IS_ERR(path)) {
err = PTR_ERR(path);
path = NULL;
goto out;
}
depth = ext_depth(inode);
/*
* A consistent leaf must not be empty. This situation is possible,
* though, _during_ tree modification, and it's why an assert can't
* be put in ext4_find_extent().
*/
if (unlikely(path[depth].p_ext == NULL && depth != 0)) {
EXT4_ERROR_INODE(inode,
"bad extent address - lblock: %lu, depth: %d, pblock: %lld",
(unsigned long) EXT4_C2B(sbi, lclu),
depth, path[depth].p_block);
err = -EFSCORRUPTED;
goto out;
}
extent = path[depth].p_ext;
/* can't be mapped if the extent tree is empty */
if (extent == NULL)
goto out;
first_lblk = le32_to_cpu(extent->ee_block);
first_lclu = EXT4_B2C(sbi, first_lblk);
/*
* Three possible outcomes at this point - found extent spanning
* the target cluster, to the left of the target cluster, or to the
* right of the target cluster. The first two cases are handled here.
* The last case indicates the target cluster is not mapped.
*/
if (lclu >= first_lclu) {
last_lclu = EXT4_B2C(sbi, first_lblk +
ext4_ext_get_actual_len(extent) - 1);
if (lclu <= last_lclu) {
mapped = 1;
} else {
first_lblk = ext4_ext_next_allocated_block(path);
first_lclu = EXT4_B2C(sbi, first_lblk);
if (lclu == first_lclu)
mapped = 1;
}
}
out:
ext4_ext_drop_refs(path);
kfree(path);
return err ? err : mapped;
}